Journal Description
Biosensors
Biosensors
is an international, peer-reviewed, open access journal on the technology and science of biosensors published monthly online by MDPI.
- Open Access— free for readers, with article processing charges (APC) paid by authors or their institutions.
- High Visibility: indexed within Scopus, SCIE (Web of Science), PubMed, MEDLINE, PMC, Embase, CAPlus / SciFinder, Inspec, and other databases.
- Journal Rank: JCR - Q1 (Chemistry, Analytical) / CiteScore - Q1 (Engineering (miscellaneous))
- Rapid Publication: manuscripts are peer-reviewed and a first decision is provided to authors approximately 18.9 days after submission; acceptance to publication is undertaken in 2.6 days (median values for papers published in this journal in the second half of 2024).
- Recognition of Reviewers: reviewers who provide timely, thorough peer-review reports receive vouchers entitling them to a discount on the APC of their next publication in any MDPI journal, in appreciation of the work done.
Impact Factor:
4.9 (2023);
5-Year Impact Factor:
5.2 (2023)
Latest Articles
Fluorogenic Biosensing with Tunable Polydiacetylene Vesicles
Biosensors 2025, 15(1), 27; https://doi.org/10.3390/bios15010027 - 7 Jan 2025
Abstract
Polydiacetylenes (PDAs) are conjugated polymers that are well known for their colorimetric transition from blue to red with the application of energetic stimulus. Sensing platforms based on polymerized diacetylene surfactant vesicles and other structures have been widely demonstrated for various colorimetric biosensing applications.
[...] Read more.
Polydiacetylenes (PDAs) are conjugated polymers that are well known for their colorimetric transition from blue to red with the application of energetic stimulus. Sensing platforms based on polymerized diacetylene surfactant vesicles and other structures have been widely demonstrated for various colorimetric biosensing applications. Although less studied and utilized, the transition also results in a change from a non-fluorescent to a highly fluorescent state, making polydiacetylenes useful for both colorimetric and fluorogenic sensing applications. Here, we focus on the characterization and optimization of polydiacetylene vesicles to tune their sensitivity for fluorogenic sensing applications. Particularly, we look at how the structure of the diacetylene (DA) hydrocarbon tail and headgroup affect the self-assembled vesicle size and stability, polymerization kinetics, and the fluorogenic, blue to red phase transition. Longer DA acyl tails generally resulted in smaller and more stable vesicles. The polymerization kinetics and the blue to red transition were a function of both the DA acyl tail length and structure of the headgroup. Decreasing the acyl tail length generally led to vesicles that were more sensitive to energetic stimuli. Headgroup modifications had different effects depending on the structure of the headgroup. Ethanolamine headgroups resulted in vesicles with potentially increased stimuli responsivity. The lower energy stimulus to induce the chromatic transition was attributed to an increase in headgroup hydrogen bonding and polymer backbone strain. Boronic-acid headgroup functionalization led to vesicles that were generally unstable, only weakly polymerized, and unable to fully transform to the red phase due to strong polar, aromatic headgroup interactions. This work presents the design of PDA vesicles in the context of biosensing platforms and includes a discussion of the past, present, and future of PDA biosensing.
Full article
(This article belongs to the Special Issue Polymers-Based Biosensors and Bioelectronics: Designs and Applications)
►
Show Figures
Open AccessArticle
Enhancing Biocide Safety of Milk Using Biosensors Based on Cholinesterase Inhibition
by
Lynn Mouawad, Georges Istamboulie, Gaëlle Catanante and Thierry Noguer
Biosensors 2025, 15(1), 26; https://doi.org/10.3390/bios15010026 - 6 Jan 2025
Abstract
A sensitive and reliable electrochemical biosensor for the detection of benzalkonium chloride (BAC) and didecyldimethylammonium chloride (DDAC), the most commonly used disinfectant biocides in the agri-food industry, is described. Acetylcholinesterase from Drosophila melanogaster (DM AChE) and butyrylcholinesterase from horse serum (BChE) were immobilized
[...] Read more.
A sensitive and reliable electrochemical biosensor for the detection of benzalkonium chloride (BAC) and didecyldimethylammonium chloride (DDAC), the most commonly used disinfectant biocides in the agri-food industry, is described. Acetylcholinesterase from Drosophila melanogaster (DM AChE) and butyrylcholinesterase from horse serum (BChE) were immobilized by entrapment in a photocrosslinkable polymer on the surface of carbon screen-printed electrodes. Preliminary tests conducted in phosphate buffer showed limits of detection (LODs) of 0.26 µM for BAC using the BChE-based sensor and 0.04 µM for DDAC using the DM AChE sensor. These performances comply with the European regulation for dairy products, which sets a maximum allowable concentration of 0.28 µM for biocides. However, when tested directly in milk samples, a dramatic decrease in the sensitivity of both sensors towards BAC and DDAC biocides was reported. To overcome this problem, a simple liquid–liquid extraction was necessary prior to biosensor measurements, ensuring that the biosensors met European regulatory standards and provided an unbiased response.
Full article
(This article belongs to the Special Issue Ultrasensitive Biosensors and Bioassays for Real-Time Monitoring of Food Contaminants)
►▼
Show Figures
Graphical abstract
Open AccessArticle
p54-Fc-Labeled Gold Nanoparticle-Based Lateral Flow Strip-Assisted Portable Devices for Rapid and Quantitative Point-of-Care Detection of ASFV Antibodies
by
Yang Yang, Yuhao Li, Ziyang Wang, Minglong Tong, Pengcheng Zhu, Juanxian Deng, Zongjie Li, Ke Liu, Beibei Li, Donghua Shao, Zhongren Zhou, Yafeng Qiu, Zhiyong Ma and Jianchao Wei
Biosensors 2025, 15(1), 25; https://doi.org/10.3390/bios15010025 - 6 Jan 2025
Abstract
In this study, a novel rapid immunochromatographic (IC) test for African swine fever virus (ASFV) antibodies is presented. An immunochromatographic test (IC) is a detection technique that combines membrane chromatography with immunolabeling. This approach saves time for antibody preparation, resulting in a shorter
[...] Read more.
In this study, a novel rapid immunochromatographic (IC) test for African swine fever virus (ASFV) antibodies is presented. An immunochromatographic test (IC) is a detection technique that combines membrane chromatography with immunolabeling. This approach saves time for antibody preparation, resulting in a shorter production cycle. p54 is an important structural protein of African swine fever, and an ideal protein for serotype diagnosis. Gold nanoparticles are attached to the ASFV p54-Fc fusion protein, and the ASFV-specific antigen p54 and Staphylococcus aureus protein A (SPA) are labeled on a nitrocellulose membrane, at positions T and C, respectively. We developed a SPA double sandwich IC test strip, and assessed its feasibility using ASFV p54 and p54-Fc fusion proteins as antigens. ASFV p54 and p54-Fc fusion proteins were expressed and purified. A sandwich cross-flow detection method for p54, which is the primary structural protein of ASFV, was established, using colloidal gold conjugation. Our method can detect ASFV antibodies in field serum samples in about 15 min using a portable colloidal gold detector, demonstrating high specificity and sensitivity (1:320), and the coincidence rate was 98% using a commercial ELISA kit. The dilution of the serum sample can be determined by substituting the absorbance (T-line) interpreted by portable devices into the calibration curve function formula of an African swine fever virus standard serum. In summary, our method is rapid, cost-effective, precise, and highly selective. Additionally, it introduces a new approach for constructing IC test strips using SPA protein without antibody preparation, making it a reliable on-site antibody test for ASFV.
Full article
(This article belongs to the Special Issue Functional Nanomaterials for Biosensing—2nd Edition)
►▼
Show Figures
Figure 1
Open AccessArticle
A Truncated Multi-Thiol Aptamer-Based SARS-CoV-2 Electrochemical Biosensor: Towards Variant-Specific Point-of-Care Detection with Optimized Fabrication
by
Sergio Roberto Molina Ramirez, Nafiseh Samiseresht, Mateo Alejandro Martínez-Roque, Ferdinando Catania, Kevin Graef, Martin Rabe, Andreas Offenhäusser, Dirk Mayer and Gabriela Figueroa-Miranda
Biosensors 2025, 15(1), 24; https://doi.org/10.3390/bios15010024 - 6 Jan 2025
Abstract
With the goal of fast and accurate diagnosis of infectious diseases, this study presents a novel electrochemical biosensor that employs a refined aptamer (C9t) for the detection of spike (S) protein SARS-CoV-2 variants in a flexible multielectrode aptasensor array with PoC capabilities. Two
[...] Read more.
With the goal of fast and accurate diagnosis of infectious diseases, this study presents a novel electrochemical biosensor that employs a refined aptamer (C9t) for the detection of spike (S) protein SARS-CoV-2 variants in a flexible multielectrode aptasensor array with PoC capabilities. Two aptamer modifications were employed: removing the primer binding sites and including two dithiol phosphoramidite anchor molecules. Thus, reducing fabrication time from 24 to 3 h and increasing the stability and sparseness for multi-thiol aptasensors compared to a standard aptasensor using single thiols, without a reduction in aptamer density. The biosensor fabrication, optimization, and detection were verified in detail by electrochemistry, QCM-D, SPR, and XPS. The analyte–receptor binding was further confirmed spectroscopically at the level of individual molecules by AFM-IR. The aptasensor possesses a low limit of detection (8.0 fg/mL), the highest sensitivity reported for S protein (209.5 signal per concentration decade), and a wide dynamic detection range (8.0 fg/mL–38 ng/mL) in nasopharyngeal samples, covering the clinically relevant range. Furthermore, the C9t aptasensor showed high selectivity for SARS-CoV-2 S proteins over biomarkers for MERS-CoV, RSV, and Influenza. Even more, it showed a three times higher sensitivity for the Omicron in comparison to the Wuhan strain (wild type), alpha, and beta variants of the SARS-CoV-2 virus. Those results demonstrate the creation of an affordable and variant-selective refined C9t aptasensor that outperformed current rapid diagnosis tests.
Full article
(This article belongs to the Special Issue Recent Advances and Applications of Multiplexed Analysis and Multiplexed Nanobiosensors)
►▼
Show Figures
Graphical abstract
Open AccessArticle
Development and Validation of LAMP Assays for Distinguishing MPXV Clades with Fluorescent and Colorimetric Readouts
by
Nazente Atceken, Sara Asghari Dilmani, Ahmed Choukri Abdullah, Mutlu Sarıkaya, Defne Yigci, Gozde Korkmaz and Savas Tasoglu
Biosensors 2025, 15(1), 23; https://doi.org/10.3390/bios15010023 - 6 Jan 2025
Abstract
Human monkeypox (Mpox) is a zoonotic disease caused by the Monkeypox virus (MPXV). As of 14 August 2024, the World Health Organization (WHO) has declared it a global health emergency. For Mpox, this was the second public health emergency of global significance in
[...] Read more.
Human monkeypox (Mpox) is a zoonotic disease caused by the Monkeypox virus (MPXV). As of 14 August 2024, the World Health Organization (WHO) has declared it a global health emergency. For Mpox, this was the second public health emergency of global significance in the past two years. MPXV belongs to the Poxviridae family and is phylogenetically and epidemically divided into two clades: the Congo Basin (Clade-I) and the West African (Clade-II) clades. Clade-I has been associated with more severe disease progression and higher mortality compared to Clade-II, and thus the differentiation between clades can play an important role in predicting disease prognosis. The LAMP technique has the advantages of not requiring thermal cycling and achieving higher amplification in a shorter time compared to qPCR. Different types of LAMP assays were developed in this study to benefit from these advantages. We report the development of LAMP-1 and LAMP-2 assays using the LAMP method to detect MPXV Clade-I and Clade-II, respectively. The LAMP-1 assay includes both fluorescence and visible colorimetric readout tests developed with sensitivities of 103 and 107 copies, respectively. For the LAMP-2 assay, a probe-based test utilizing the Novel R-Duplex DARQ probe was developed, offering fluorescence detection at a sensitivity of 103 copies. As a result, we successfully developed three highly specific molecular diagnostic tests that distinctly differentiate between MPXV clades, delivering essential tools for the precise diagnosis and effective control of Mpox.
Full article
(This article belongs to the Special Issue Optical Bioimaging and Biosensing)
►▼
Show Figures
Figure 1
Open AccessArticle
The Pre-Polarization and Concentration of Cells near Micro-Electrodes Using AC Electric Fields Enhances the Electrical Cell Lysis in a Sessile Drop
by
Kishor Kaphle and Dharmakeerthi Nawarathna
Biosensors 2025, 15(1), 22; https://doi.org/10.3390/bios15010022 - 6 Jan 2025
Abstract
Cell lysis is the starting step of many biomedical assays. Electric field-based cell lysis is widely used in many applications, including point-of-care (POC) applications, because it provides an easy one-step solution. Many electric field-based lysis methods utilize micro-electrodes to apply short electric pulses
[...] Read more.
Cell lysis is the starting step of many biomedical assays. Electric field-based cell lysis is widely used in many applications, including point-of-care (POC) applications, because it provides an easy one-step solution. Many electric field-based lysis methods utilize micro-electrodes to apply short electric pulses across cells. Unfortunately, these cell lysis devices produce relatively low cell lysis efficiency as electric fields do not reach a significant portion of cells in the sample. Additionally, the utility of syringe pumps for flow cells in and out of the microfluidics channel causes cell loss and low throughput cell lysis. To address these critical issues, we suspended the cells in a sessile drop and concentrated on the electrodes. We used low-frequency AC electric fields (1 Vpp, 0–100 kHz) to drive the cells effectively towards electrodes and lysed using a short pulse of 10 V. A post-lysis analysis was performed using a hemocytometer, UV-vis spectroscopy, and fluorescence imaging. The results show that the pre-electric polarization of cells, prior to applying short electrical pulses, enhances the cell lysis efficiency. Additionally, the application of AC electric fields to concentrate cells on the electrodes reduces the assay time to about 4 min. In this study, we demonstrated that low-frequency AC electric fields can be used to pre-polarize and concentrate cells near micro-electrodes and improve cell lysis efficiency. Due to the simplicity and rapid cell lysis, this method may be suitable for POC assay development.
Full article
(This article belongs to the Special Issue Lab-on-a-Chip Devices for Point-of-Care Diagnostics)
►▼
Show Figures
Figure 1
Open AccessArticle
SPR Biosensor Based on Bilayer MoS2 for SARS-CoV-2 Sensing
by
Talia Tene, Stefano Bellucci and Cristian Vacacela Gomez
Biosensors 2025, 15(1), 21; https://doi.org/10.3390/bios15010021 - 4 Jan 2025
Abstract
The COVID-19 pandemic has highlighted the urgent need for rapid, sensitive, and reliable diagnostic tools for detecting SARS-CoV-2. In this study, we developed and optimized a surface plasmon resonance (SPR) biosensor incorporating advanced materials to enhance its sensitivity and specificity. Key parameters, including
[...] Read more.
The COVID-19 pandemic has highlighted the urgent need for rapid, sensitive, and reliable diagnostic tools for detecting SARS-CoV-2. In this study, we developed and optimized a surface plasmon resonance (SPR) biosensor incorporating advanced materials to enhance its sensitivity and specificity. Key parameters, including the thickness of the silver layer, silicon nitride dielectric layer, molybdenum disulfide (MoS2) layers, and ssDNA recognition layer, were systematically optimized to achieve the best balance between sensitivity, resolution, and attenuation. The optimized configuration, consisting of a 45 nm silver layer, a 13 nm silicon nitride layer, 2 MoS2 layers, and a 5 nm ssDNA layer, demonstrated superior performance for detecting SARS-CoV-2 in PBS solution. The biosensor exhibited high sensitivity at low viral concentrations, achieving a sensitivity of 375.01°/RIU, a detection accuracy of 0.002, and a quality factor of 38.34 at 1.0 mM SARS-CoV-2 concentration. Performance metrics validated the sensor’s capability for reliable detection, particularly in early-stage diagnostics where timely intervention is critical. Moreover, the biosensor’s linear response to refractive index changes confirmed its potential for quantitative viral concentration analysis. This study underlines the significance of integrating advanced materials, such as MoS2 and silicon nitride, to enhance SPR biosensor performance. The findings establish the proposed biosensor as a robust and precise diagnostic tool for SARS-CoV-2 detection, with potential applications in clinical diagnostics and epidemiological monitoring.
Full article
(This article belongs to the Special Issue Advanced Optical Methods for Biosensing)
►▼
Show Figures
Figure 1
Open AccessArticle
Evaluating Normalization Methods for Robust Spectral Performance Assessments of Hyperspectral Imaging Cameras
by
Siavash Mazdeyasna, Mohammed Shahriar Arefin, Andrew Fales, Silas J. Leavesley, T. Joshua Pfefer and Quanzeng Wang
Biosensors 2025, 15(1), 20; https://doi.org/10.3390/bios15010020 - 4 Jan 2025
Abstract
Hyperspectral imaging (HSI) technology, which offers both spatial and spectral information, holds significant potential for enhancing diagnostic performance during endoscopy and other medical procedures. However, quantitative evaluation of HSI cameras is challenging due to various influencing factors (e.g., light sources, working distance, and
[...] Read more.
Hyperspectral imaging (HSI) technology, which offers both spatial and spectral information, holds significant potential for enhancing diagnostic performance during endoscopy and other medical procedures. However, quantitative evaluation of HSI cameras is challenging due to various influencing factors (e.g., light sources, working distance, and illumination angle) that can alter the reflectance spectra of the same target as these factors vary. Towards robust, universal test methods, we evaluated several data normalization methods aimed at minimizing the impact of these factors. Using a high-resolution HSI camera, we measured the reflectance spectra of diffuse reflectance targets illuminated by two different light sources. These spectra, along with the reference spectra from the target manufacturer, were normalized with nine different methods (e.g., area under the curve, standard normal variate, and centering power methods), followed by a uniform scaling step. We then compared the measured spectra to the reference to evaluate the capability of each normalization method in ensuring a consistent, standardized performance evaluation. Our results demonstrate that normalization can mitigate the impact of some factors during HSI camera evaluation, with performance varying across methods. Generally, noisy spectra pose challenges for normalization methods that rely on limited reflectance values, while methods based on reflectance values across the entire spectrum (such as standard normal variate) perform better. The findings also suggest that absolute reflectance spectral measurements may be less effective for clinical diagnostics, whereas normalized spectral measurements are likely more appropriate. These findings provide a foundation for standardized performance testing of HSI-based medical devices, promoting the adoption of high-quality HSI technology for critical applications such as early cancer detection.
Full article
(This article belongs to the Special Issue Advanced Materials in Nano-Photonics and Biosensor Systems)
►▼
Show Figures
Figure 1
Open AccessArticle
Machine Learning-Based Quantification of Lateral Flow Assay Using Smartphone-Captured Images
by
Anne M. Davis and Asahi Tomitaka
Biosensors 2025, 15(1), 19; https://doi.org/10.3390/bios15010019 - 4 Jan 2025
Abstract
Lateral flow assay has been extensively used for at-home testing and point-of-care diagnostics in rural areas. Despite its advantages as convenient and low-cost testing, it suffers from poor quantification capacity where only yes/no or positive/negative diagnostics are achieved. In this study, machine learning
[...] Read more.
Lateral flow assay has been extensively used for at-home testing and point-of-care diagnostics in rural areas. Despite its advantages as convenient and low-cost testing, it suffers from poor quantification capacity where only yes/no or positive/negative diagnostics are achieved. In this study, machine learning and deep learning models were developed to quantify the analyte load from smartphone-captured images of the lateral flow assay test. The comparative analysis identified that random forest and convolutional neural network (CNN) models performed well in classifying the lateral flow assay results compared to other well-established machine learning models. When trained on small-size images, random forest models excelled CNN models in image classification. Contrarily, CNN models outperformed random forest models in classifying noisy images.
Full article
(This article belongs to the Section Nano- and Micro-Technologies in Biosensors)
►▼
Show Figures
Figure 1
Open AccessArticle
Selection and Engineering of Novel Brighter Bioluminescent Reporter Gene and Color- Tuning Luciferase for pH-Sensing in Mammalian Cells
by
Vanessa R. Bevilaqua, Gabriel F. Pelentir, Moema A. Hausen, Eliana A. R. Duek and Vadim R. Viviani
Biosensors 2025, 15(1), 18; https://doi.org/10.3390/bios15010018 - 4 Jan 2025
Abstract
Firefly luciferases have been extensively used for bioanalytical applications, including their use as bioluminescent reporters, biosensors, and for bioimaging biological and pathological processes. Due to their intrinsic pH- sensitivity, in recent years we have demonstrated that firefly luciferases can also be harnessed as
[...] Read more.
Firefly luciferases have been extensively used for bioanalytical applications, including their use as bioluminescent reporters, biosensors, and for bioimaging biological and pathological processes. Due to their intrinsic pH- sensitivity, in recent years we have demonstrated that firefly luciferases can also be harnessed as color- tuning sensors of intracellular pH. However, it is known that mammalian cells require temperatures higher than 36 °C, which red-shift the bioluminescence spectra of most firefly luciferases, decreasing their activities and the resolution of ratiometric pH analysis. Therefore, we prospected and engineered novel pH-sensitive firefly luciferases for mammalian cells. We humanized the luciferases of Amydetes vivianii (Amy-Luc) and Cratomorphus distinctus (Crt-Luc) fireflies, inserted them into the pCDNA3 vector, and compared their bioluminescence and pH-sensing properties with those of Macrolampis firefly luciferase (Mac-Luc) inside fibroblasts. The transfected COS-1 with Mac-Luc and Crt-Luc displayed lower bioluminescence activity and considerably red-shifted spectra (611 and 564 nm, respectively) at 37 °C, whereas Amy-Luc displayed the highest bioluminescence activity and spectral stability at 37 °C inside cells, displaying the most blue-shifted spectrum at such temperatures (548 nm) and the best spectral resolution at different pH values, making it possible to ratiometrically estimate the pH from 6.0 to 8.0. These results show that Amy-Luc is a novel brighter reporter gene and suitable pH- indicator for mammalian cells. Furthermore, whereas at pH 8.0 the spectrum was thermally stable, at pH 6.0 Amy-Luc showed higher temperature sensitivity, raising the possibility of using this luciferase as an intracellular temperature sensor. Thus, the improved bioluminescence properties as compared to existing luciferases could offer advantages for in vivo imaging and pH- sensing for the study of mammalian cellular physiology.
Full article
(This article belongs to the Special Issue Fluorescent Materials with Excellent Biocompatibility and Their Application in Bio-Sensing, Bio-Imaging (Volume II))
►▼
Show Figures
Graphical abstract
Open AccessArticle
Glucose Sensor Design Based on Monte Carlo Simulation
by
Gang Xue, Ruiping Zhang, Yihao Chen, Wei Xu and Changxing Zhang
Biosensors 2025, 15(1), 17; https://doi.org/10.3390/bios15010017 - 4 Jan 2025
Abstract
Continuous glucose monitoring based on the minimally invasive implantation of glucose sensor is characterized by high accuracy and good stability. At present, glucose concentration monitoring based on fluorescent glucose capsule sensor is a new development trend. In this paper, we design a fluorescent
[...] Read more.
Continuous glucose monitoring based on the minimally invasive implantation of glucose sensor is characterized by high accuracy and good stability. At present, glucose concentration monitoring based on fluorescent glucose capsule sensor is a new development trend. In this paper, we design a fluorescent glucose capsule sensor with a design optimization study. The motion trajectory of incident light in the fluorescent gel layer is simulated based on the Monte Carlo method, and the cloud maps of light intensity with the light intensity distribution at the light-receiving layer are plotted. Altering the density of fluorescent molecules, varying the thickness of tissue layers, and adjusting the angle of incidence deflection, the study investigates the influence of these parameter changes on the optimal position of reflected light at the bottom. Finally, the simulation results were utilized to design and fabricate a fluorescent glucose capsule sensor. Rabbit subcutaneous tissue glucose level tests and real-time glucose solution concentration monitoring experiments were performed. This work contributes to the real-time monitoring of glucose levels and opens up new avenues for research on fabricating glucose sensors.
Full article
(This article belongs to the Special Issue Wearable Biosensors and Health Monitoring)
►▼
Show Figures
Figure 1
Open AccessArticle
Theranostic Contact Lens for Ocular Cystinosis Utilizing Gold Nanoparticles
by
Eunbe Ha, Hwajeong Kang and Hyeran Noh
Biosensors 2025, 15(1), 16; https://doi.org/10.3390/bios15010016 - 3 Jan 2025
Abstract
Ocular cystinosis is a disease in which accumulated cystine crystals cause damage to the eyes, necessitating timely treatment and ongoing monitoring of cystine levels. The current treatment involves frequent administration of cysteamine eye drops, which suffer from low bioavailability and can lead to
[...] Read more.
Ocular cystinosis is a disease in which accumulated cystine crystals cause damage to the eyes, necessitating timely treatment and ongoing monitoring of cystine levels. The current treatment involves frequent administration of cysteamine eye drops, which suffer from low bioavailability and can lead to drug toxicity, making it essential to prescribe an appropriate dosage based on the patient’s condition. Additionally, cystine crystal levels are typically assessed subjectively via slit-lamp examination, requiring frequent clinical visits and causing discomfort for the patient. In this study, we propose a theranostic contact lens that simultaneously performs therapy and diagnosis on a single platform utilizing gold nanoparticles (GNPs). The binding interactions between GNPs and cystine were confirmed in solution, and thermodynamic analysis further elucidated the bonding force between the two substances. With a comprehensive understanding of these interactions, we investigated the potential of the theranostic GNP-loaded contact lens (GNP-CL). Upon exposure to various concentrations of cystine, the GNP-CL demonstrated distinct color changes, transitioning from red to blue. This color shift enabled quantitative monitoring of cystine levels. The treatment efficacy was validated by confirming a reduction in cystine concentration following the reaction. This platform has the potential to improve disease management in ocular cystinosis by reducing the reliance on cysteamine and offering an objective self-monitoring tool that does not require specialized equipment.
Full article
(This article belongs to the Special Issue Nanoparticle-Based Biosensors and Their Applications)
►▼
Show Figures
Graphical abstract
Open AccessArticle
A Sensitive and Selective Electrochemical Aptasensor for Carbendazim Detection
by
Suthira Pushparajah, Mahnaz Shafiei and Aimin Yu
Biosensors 2025, 15(1), 15; https://doi.org/10.3390/bios15010015 - 3 Jan 2025
Abstract
Carbendazim (CBZ) is used to prevent fungal infections in agricultural crops. Given its high persistence and potential for long-term health effects, it is crucial to quickly identify pesticide residues in food and the environment in order to mitigate excessive exposure. Aptamer-based sensors offer
[...] Read more.
Carbendazim (CBZ) is used to prevent fungal infections in agricultural crops. Given its high persistence and potential for long-term health effects, it is crucial to quickly identify pesticide residues in food and the environment in order to mitigate excessive exposure. Aptamer-based sensors offer a promising solution for pesticide detection due to their exceptional selectivity, design versatility, ease of use, and affordability. Herein, we report the development of an electrochemical aptasensor for CBZ detection. The sensor was fabricated through a one-step electrodeposition of platinum nanoparticles (Pt NPs) and reduced graphene oxide (rGO) on a glassy carbon electrode (GCE). Then, a CBZ-specific aptamer was attached via Pt-sulfur bonds. Upon combining CBZ with the aptamer on the electrode surface, the redox reaction of the electrochemical probe K4[Fe(CN)6] is hindered, resulting in a current drop. Under optimized conditions (pH of 7.5 and 25 min of incubation time), the proposed aptasensor showed a linear current reduction to CBZ concentrations between 0.5 and 15 nM. The limit of detection (LOD) for this proposed aptasensor is 0.41 nM. Along with its repeatable character, the aptasensor demonstrated better selectivity for CBZ compared to other potential compounds. The recovery rates for detecting CBZ in skim milk and tap water using the standard addition method were 98% and 96%, respectively. The proposed aptasensor demonstrated simplicity, sensitivity, and selectivity for detecting CBZ with satisfactory repeatability. It establishes a strong foundation for environmental monitoring of CBZ.
Full article
(This article belongs to the Special Issue Optical and Electrochemical Biosensors for Biological, Environmental, and Food Analysis)
►▼
Show Figures
Figure 1
Open AccessArticle
Stress Monitoring in Pandemic Screening: Insights from GSR Sensor and Machine Learning Analysis
by
Antonios Georgas, Anna Panagiotakopoulou, Grigorios Bitsikas, Katerina Vlantoni, Angelo Ferraro and Evangelos Hristoforou
Biosensors 2025, 15(1), 14; https://doi.org/10.3390/bios15010014 - 2 Jan 2025
Abstract
This study investigates the impact of patient stress on COVID-19 screening. An attempt was made to measure the level of anxiety of individuals undertaking rapid tests for SARS-CoV-2. To this end, a galvanic skin response (GSR) sensor that was connected to a microcontroller
[...] Read more.
This study investigates the impact of patient stress on COVID-19 screening. An attempt was made to measure the level of anxiety of individuals undertaking rapid tests for SARS-CoV-2. To this end, a galvanic skin response (GSR) sensor that was connected to a microcontroller was used to record the individual stress levels. GSR data were collected from 51 individuals at SARS-CoV-2 testing sites. The recorded data were then compared with theoretical estimates to draw insights into stress patterns. Machine learning analysis was applied for the optimization of the sensor results. Classification algorithms allowed the automatic reading of the sensor results and individual identification as “stressed” or “not stressed”. The findings confirmed the initial hypothesis that there was a significant increase in stress levels during the rapid test. This observation is critical, as heightened anxiety may influence a patient’s willingness to participate in screening procedures, potentially reducing the effectiveness of public health screening strategies.
Full article
(This article belongs to the Special Issue Feature Paper in Biosensor and Bioelectronic Devices 2024)
►▼
Show Figures
Figure 1
Open AccessReview
Polysaccharide Hydrogel-Assisted Biosensing Platforms for Point-of-Care Use
by
Sang-Uk Kim, Young Jun Kim and Tae Hee Lee
Biosensors 2025, 15(1), 13; https://doi.org/10.3390/bios15010013 - 2 Jan 2025
Abstract
Point-of-care (POC) use is one of the essential goals of biosensing platforms. Because the increasing demand for testing cannot be met by a centralized laboratory-based strategy, rapid and frequent testing at the right time and place will be key to increasing health and
[...] Read more.
Point-of-care (POC) use is one of the essential goals of biosensing platforms. Because the increasing demand for testing cannot be met by a centralized laboratory-based strategy, rapid and frequent testing at the right time and place will be key to increasing health and safety. To date, however, there are still difficulties in developing a simple and affordable, as well as sensitive and effective, platform that enables POC use. In terms of materials, hydrogels, a unique family of water-absorbing biocompatible polymers, have emerged as promising components for the development of biosensors. Combinations of hydrogels have various additional applications, such as in hydrophilic coatings, nanoscale filtration, stimuli-responsive materials, signal enhancement, and biodegradation. In this review, we highlight the recent efforts to develop hydrogel-assisted biosensing platforms for POC use, especially focusing on polysaccharide hydrogels like agarose, alginate, chitosan, and so on. We first discuss the pros and cons of polysaccharide hydrogels in practical applications and then introduce case studies that test different formats, such as paper-based analytical devices (PADs), microfluidic devices, and independent platforms. We believe the analysis in the present review provides essential information for the development of biosensing platforms for POC use in resource-limited settings.
Full article
(This article belongs to the Special Issue Biomaterials for Biosensing Applications)
►▼
Show Figures
Figure 1
Open AccessArticle
Spermine Enhances the Peroxidase Activities of Multimeric Antiparallel G-quadruplex DNAzymes
by
Raphael I. Adeoye, Theresia K. Ralebitso-Senior, Amanda Boddis, Amanda J. Reid, Francesca Giuntini, Amos A. Fatokun, Andrew K. Powell, Adaoha Ihekwaba-Ndibe, Sylvia O. Malomo and Femi J. Olorunniji
Biosensors 2025, 15(1), 12; https://doi.org/10.3390/bios15010012 - 2 Jan 2025
Abstract
G-quadruplex (G4) DNAzymes with peroxidase activities hold potential for applications in biosensing. While these nanozymes are easy to assemble, they are not as efficient as natural peroxidase enzymes. Several approaches are being used to better understand the structural basis of their reaction mechanisms,
[...] Read more.
G-quadruplex (G4) DNAzymes with peroxidase activities hold potential for applications in biosensing. While these nanozymes are easy to assemble, they are not as efficient as natural peroxidase enzymes. Several approaches are being used to better understand the structural basis of their reaction mechanisms, with a view to designing constructs with improved catalytic activities. Spermine alters the structures and enhances the activities of some G4 DNAzymes. The reported effect of spermine in shifting the conformation of some G4 DNAzymes from antiparallel to parallel has not been tested on multimeric G4 DNAzymes. In this study, we examined the effects of spermine on the catalytic activities of multivalent constructs of Bcl2, c-MYC, PS2.M, and PS5.M. Our findings show that spermine significantly improved the peroxidase activity of PS2.M, an antiparallel G4 DNAzyme, while there was no significant effect on c-MYC, which already exists in a parallel conformation. The addition of spermine led to a substantial increase in the initial velocity of PS2.M and its multimeric form, enhancing it by approximately twofold. Therefore, spermine enhancement offers promise in expanding the range of DNAzymes available for use as biosensing tools.
Full article
(This article belongs to the Special Issue Advanced Nanozyme for Biosensors)
►▼
Show Figures
Figure 1
Open AccessArticle
High-Performance Photocatalytic Multifunctional Material Based on Bi4Ti3O12-Supported Ag and Ti3C2Tx for Organic Degradation and Antibacterial Applications
by
Kexi Zhang, Bingdong Yan, Xiaohong Wang, Yang Cao, Wanjun Hao and Jinchun Tu
Biosensors 2025, 15(1), 11; https://doi.org/10.3390/bios15010011 - 31 Dec 2024
Abstract
With the rapid development of modern science and technology and the diversification of social needs, traditional single-performance materials struggle to meet the complex and changeable application scenarios. To address the multifaceted requirements of biomedical applications, such as disease diagnosis and treatment, scientists are
[...] Read more.
With the rapid development of modern science and technology and the diversification of social needs, traditional single-performance materials struggle to meet the complex and changeable application scenarios. To address the multifaceted requirements of biomedical applications, such as disease diagnosis and treatment, scientists are dedicated to developing new multifunctional biomaterials with multiple activities. Bi4Ti3O12 (BTO), despite its versatility and application potential, has insufficient photocatalytic performance. Silver nanoparticles (Ag) and Ti3C2Tx are particularly effective as antibacterial materials but they have relatively single functions. In this study, BTO/Ag/Ti3C2Tx biomultifunctional materials were constructed by combining BTO with Ag and Ti3C2Tx. We discovered that the addition of Ag and Ti3C2Tx effectively optimized the visible light absorption characteristics of BTO, reduced the electron transfer resistance, and increased the carrier concentration, thus significantly improving the photocatalytic performance of composite material, thereby markedly improving the composite’s photocatalytic performance and its efficacy in photochemical sensing and photodegradation. At the same time, BTO, as a carrier, effectively avoids Ag and Ti3C2Tx agglomeration and gives full play to its antibacterial properties. In the specific performance studies, ascorbic acid and MB were used as the subjects of photochemical sensing and photodegradation properties, while Escherichia coli and Staphylococcus aureus were tested for antibacterial properties. The BTO/Ag/Ti3C2Tx composite showed remarkable results in all assessments, demonstrating its potential as a versatile antibacterial and photocatalytic material.
Full article
(This article belongs to the Special Issue Lighting Up Single-Molecule Biosensors and Bioimaging: Now and the Decade to Come)
►▼
Show Figures
Figure 1
Open AccessArticle
A Microfluidic Biosensor for Quantitative Detection of Salmonella in Traditional Chinese Medicine
by
Yutong Wu, Yang Liu, Jinchen Ma, Shanxi Zhu, Xiaojun Zhao, Huawei Mou, Xuanqi Ke, Zhisheng Wu, Yifei Wang, Sheng Lin and Wuzhen Qi
Biosensors 2025, 15(1), 10; https://doi.org/10.3390/bios15010010 - 27 Dec 2024
Abstract
Microbial contamination is an important factor threatening the safety of Chinese medicine preparations, and microfluidic detection methods have demonstrated excellent advantages in the application of rapid bacterial detection. In our study, a novel optical biosensor was developed for the rapid and sensitive detection
[...] Read more.
Microbial contamination is an important factor threatening the safety of Chinese medicine preparations, and microfluidic detection methods have demonstrated excellent advantages in the application of rapid bacterial detection. In our study, a novel optical biosensor was developed for the rapid and sensitive detection of Salmonella in traditional Chinese medicine on a microfluidic chip. Immune gold@platinum nanocatalysts (Au@PtNCs) were utilized for specific bacterial labeling, while magnetic nano-beads (MNBs) with a novel high-gradient magnetic field were employed for the specific capture of bacteria. The immune MNBs, immune Au@PtNCs, and bacterial samples were introduced into a novel passive microfluidic micromixer for full mixing, resulting in the formation of a double-antibody sandwich structure due to antigen–antibody immune reactions. Subsequently, the mixture flowed into the reaction cell, where the MNBs-Salmonella-Au@PtNCs complex was captured by the magnetic field. After washing, hydrogen peroxide-tetramethylbenzidine substrate (H2O2-TMB) was added, reacting with the Au@PtNCs peroxidase to produce a blue reaction product. This entire process was automated using a portable device, and Salmonella concentration was analyzed via a phone application. This simple biosensor has good specificity with a detection range of 9 × 101–9 × 105 CFU/mL and can detect Salmonella concentrations as low as 90 CFU/mL within 74 min. The average recoveries of the spiked samples ranged from 76.8% to 109.5%
Full article
(This article belongs to the Special Issue Design and Application of Microfluidic Biosensors in Biomedicine)
►▼
Show Figures
Figure 1
Open AccessArticle
Electrochemical Glucose Sensor Based on Dual Redox Mediators
by
Changyun Quan, Yue Zhang, Yuanyuan Liu, Liping Wen, Haixia Yang, Xueqin Huang, Minghui Yang and Binjie Xu
Biosensors 2025, 15(1), 9; https://doi.org/10.3390/bios15010009 - 27 Dec 2024
Abstract
Electrochemical glucose sensor holds significant promise for the monitoring of blood glucose levels in diabetic patients. In this study, we proposed a novel electrochemical glucose sensor based on 1,10-Phenanthroline-5,6-dione (PD)/Ru(III) as a dual redox mediator. The synergistic effect of PD and Ru(III) was
[...] Read more.
Electrochemical glucose sensor holds significant promise for the monitoring of blood glucose levels in diabetic patients. In this study, we proposed a novel electrochemical glucose sensor based on 1,10-Phenanthroline-5,6-dione (PD)/Ru(III) as a dual redox mediator. The synergistic effect of PD and Ru(III) was utilized to efficiently facilitate the electron transfer between the enzyme-active center and the electrode. Then, a commercial disposable electrochemical glucose sensor was constructed based on screen-printing electrodes. Experimental results indicated the synergy between PD and Ru(III) provided a promising electron transfer environment for a glucose dehydrogenase (GDH)-catalyzed glucose reaction. The sensor exhibits a linear glucose response range from 0.01 to 38.6 mmol/L, with a limit of detection (LOD) as low as 7.0 µmol/L and a sensitivity of 38 µA·L/(mmol·cm2). The accuracy of the sensor was further validated in spiked recovery tests of human venous blood samples. The glucose recovery rate was between 99.5% and 107%, with a relative standard deviation (RSD) of less than 3.2%. These results demonstrate that our sensor has high potential for commercialization and practical application in glucose monitoring.
Full article
(This article belongs to the Special Issue State-of-the-Art Biosensors in China (2nd Edition))
►▼
Show Figures
Figure 1
Open AccessArticle
A Multi-Layered Origami Tactile Sensory Ring for Wearable Biomechanical Monitoring
by
Rajat Subhra Karmakar, Hsin-Fu Lin, Jhih-Fong Huang, Jui-I Chao, Ying-Chih Liao and Yen-Wen Lu
Biosensors 2025, 15(1), 8; https://doi.org/10.3390/bios15010008 - 27 Dec 2024
Abstract
An origami-based tactile sensory ring utilizing multilayered conductive paper substrates presents an innovative approach to wearable health applications. By harnessing paper’s flexibility and employing origami folding, the sensors integrate structural stability and self-packaging without added encapsulation layers. Knot-shaped designs create loop-based systems that
[...] Read more.
An origami-based tactile sensory ring utilizing multilayered conductive paper substrates presents an innovative approach to wearable health applications. By harnessing paper’s flexibility and employing origami folding, the sensors integrate structural stability and self-packaging without added encapsulation layers. Knot-shaped designs create loop-based systems that secure conductive paper strips and protect sensing layers. Demonstrating a sensitivity of 3.8 kPa−1 at subtle pressures (0–0.05 kPa), the sensors detect both minimal stimuli and high-pressure inputs. Electrical modeling of various origami configurations identifies designs with optimized performance with a pentagon knot offering higher sensitivity to support high-sensitivity needs. Meanwhile a square knot provides greater precision and quicker recovery, balancing sensitivity and stability for real-time feedback devices. The enhanced elastic modulus from folds remains within human skin’s elasticity range, ensuring comfort. Applications include grip strength monitoring and pulse rate detection from the thumb, capturing pulse transit time (PTT), an essential cardiovascular biomarker. This design shows the potential of origami-based tactile sensors in creating versatile, cost-effective wearable health monitoring systems.
Full article
(This article belongs to the Special Issue Recent Progress in Wearable Biosensors: Materials, Functions and Applications)
►▼
Show Figures
Figure 1
Journal Menu
► ▼ Journal Menu-
- Biosensors Home
- Aims & Scope
- Editorial Board
- Reviewer Board
- Topical Advisory Panel
- Instructions for Authors
- Special Issues
- Topics
- Sections & Collections
- Article Processing Charge
- Indexing & Archiving
- Editor’s Choice Articles
- Most Cited & Viewed
- Journal Statistics
- Journal History
- Journal Awards
- Conferences
- Editorial Office
Journal Browser
► ▼ Journal BrowserHighly Accessed Articles
Latest Books
E-Mail Alert
News
Topics
Topic in
Applied Sciences, Biosensors, Chips, Micromachines, Molecules
Advances in Microfluidics and Lab on a Chip Technology, 2nd Edition
Topic Editors: Roman Grzegorz Szafran, Yi YangDeadline: 31 August 2025
Topic in
Applied Sciences, Biosensors, Designs, Electronics, Materials, Micromachines
Wearable Bioelectronics: The Next Generation of Health Insights
Topic Editors: Shuo Gao, Yu Wu, Wenyu WangDeadline: 31 March 2026
Conferences
Special Issues
Special Issue in
Biosensors
Advanced Optical Methods for Biosensing
Guest Editors: Pinkie Jacob Eravuchira, Chih-Tsung Yang, Nathan LindquistDeadline: 20 January 2025
Special Issue in
Biosensors
MEMS Based Biosensors and Its Applications
Guest Editors: Yaxiaer Yalikun, Yang Yang, Kaoru Uesugi, Ming LiDeadline: 20 January 2025
Special Issue in
Biosensors
Surface-Enhanced Raman Scattering Biosensors—2nd Edition
Guest Editor: Nicoleta Elena DinaDeadline: 30 January 2025
Special Issue in
Biosensors
Microelectronics and MEMS-Based Biosensors for Healthcare Application
Guest Editors: Chengjun Huang, Zhen ZhuDeadline: 31 January 2025
Topical Collections
Topical Collection in
Biosensors
Novel Sensing System for Biomedical Applications
Collection Editors: Chia-Ching Chang, Chiun-Jye Yuan, Chih-Chia Huang
Topical Collection in
Biosensors
Microsystems for Cell Cultures
Collection Editors: Iordania Constantinou, Thomas E. Winkler