| Switchblade | |
|---|---|
 Switchblade in oblique position | |
| General information | |
| Type | oblique flying wing UAV |
| National origin | United States |
| Manufacturer | Northrop Grumman |
The Northrop Grumman Switchblade was a proposed variable sweep oblique wing unmanned aerial vehicle studied by Northrop Grumman for the United States.
The programme was cancelled in 2008, without any aircraft having flown. [1]
During WWII, Messerschmitt and Blohm + Voss studied the variable-geometry oblique wing as a solution for high-speed jet aircraft, respectively as Messerschmitt P.1109 and Blohm & Voss P 202. From 1979 to 1982, NASA successfully flew the piloted AD-1 demonstrator aircraft which validated the concept.
The United States Defence Advanced Research Projects Agency (DARPA) subsequently awarded Northrop Grumman a US$10.3 million contract for risk reduction and preliminary planning for an oblique flying wing demonstrator. [2]
The program aimed at producing a technology demonstrator aircraft to explore the various challenges which radical design entails. The proposed aircraft would be a purely flying wing (an aircraft with no other auxiliary surfaces such as tails, canards, or a fuselage) where the wing is swept with one side of the aircraft forward, and one backwards in an asymmetric fashion. [3] This aircraft configuration is believed to give it a combination of high speed, long range and long endurance. [4] The program entailed two phases. Phase I explored the theory and result in a conceptual design, while Phase II would have resulted in the design, manufacture, and flight test of an aircraft. The outcome of the program would have resulted in data which could then be used when considering future military aircraft designs.
Flight of the Switchblade was scheduled for 2020 with its 61-meter long oblique wing perpendicular to its engines like a typical aircraft. As the aircraft increased speed, the wing begins to pivot, so that when it breaks the sound barrier, its wing has swiveled 60 degrees, with one wingtip pointing forward and the other backward. The change in aerodynamics and the general structure would have made the aircraft very difficult to control for a human being. The plane was to be fully controlled by an onboard computer controlling flight parameters. Following Phase I the aircraft concept was cancelled in 2008. [1]
General characteristics
Performance
A flying wing is a tailless fixed-wing aircraft that has no definite fuselage, with its crew, payload, fuel, and equipment housed inside the main wing structure. A flying wing may have various small protuberances such as pods, nacelles, blisters, booms, or vertical stabilizers.
The Boeing X-45 unmanned combat air vehicle is a concept demonstrator for a "next generation" of completely autonomous military aircraft, developed by Boeing's Phantom Works. Manufactured by Boeing Integrated Defense Systems, the X-45 was a part of DARPA's J-UCAS project.
The Northrop Grumman X-47 is a demonstration unmanned combat aerial vehicle. The X-47 began as part of DARPA's J-UCAS program, and is now part of the United States Navy's UCAS-D program to create a carrier-based unmanned aircraft. Unlike the Boeing X-45, initial Pegasus development was company-funded. The original vehicle carries the designation X-47A Pegasus, while the follow-on naval version is designated X-47B.
Robert T. Jones,, was an American aerodynamicist and aeronautical engineer for NACA and later NASA. He was known at NASA as "one of the premier aeronautical engineers of the twentieth century".
The Dassault nEUROn is an experimental unmanned combat aerial vehicle (UCAV) being developed with international cooperation, led by the French company Dassault Aviation. Countries involved in this project include France, Greece, Italy, Spain, Sweden and Switzerland. The design goal is to create a stealthy, autonomous UAV that can function in medium-to-high threat combat zones.
Joint Unmanned Combat Air Systems, or J-UCAS, was the name for the joint U.S. Navy and U.S. Air Force unmanned combat air vehicle procurement project. Originally two separate projects of the U.S. Air Force and Navy respectively: UCAV and UCAV-N; both programs merged in 2003. The two vehicles involved in J-UCAS were the Boeing X-45 and Northrop Grumman X-47A Pegasus, orginially part of UCAV and UCAV-N repectively. J-UCAS was managed by the Defense Advanced Research Projects Agency. In the 2006 Quadrennial Defense Review, it was stated that the J-UCAS program would be terminated and instead a new long-range strategic bomber program, Next-Generation Bomber, for the Air Force would launch. The program was revitalized into a Navy-only program named UCAS-D.
An oblique wing is a variable geometry wing concept. On an aircraft so equipped, the wing is designed to rotate on center pivot, so that one tip is swept forward while the opposite tip is swept aft. By changing its sweep angle in this way, drag can be reduced at high speed without sacrificing low speed performance. This is a variation on the classic swing-wing design, intended to simplify construction and retain the center of gravity as the sweep angle is changed.
The Northrop Grumman X-47B is a demonstration unmanned combat aerial vehicle (UCAV) designed for aircraft carrier-based operations. Developed by the American defense technology company Northrop Grumman, the X-47 project began as part of DARPA's J-UCAS program, and subsequently became part of the United States Navy's Unmanned Combat Air System Demonstration (UCAS-D) program. The X-47B is a tailless jet-powered blended-wing-body aircraft capable of semi-autonomous operation and aerial refueling.
The NASA AD-1 is both an aircraft and an associated flight test program conducted between 1979 and 1982 at the NASA Dryden Flight Research Center, Edwards California, which successfully demonstrated an aircraft wing that could be pivoted obliquely from zero to 60 degrees during flight.
Automated aerial refueling (AAR) refers to methods for autonomous refueling of manned and unmanned aircraft.
Aurora Flight Sciences (AFS) is an American aviation and aeronautics research subsidiary of Boeing that specializes in special-purpose unmanned aerial vehicles. Aurora's headquarters is at Manassas Regional Airport.
The Aerial Reconfigurable Embedded System (ARES) was a concept for an unmanned VTOL flight module that can transport various payloads. The concept started as the TX (Transformer) in 2009 for a terrain-independent transportation system centered on a ground vehicle that could be configured into a VTOL air vehicle and carry four troops. ARES' primary function was the same as TX, to use flight to avoid ground-based transportation threats like ambushes and IEDs for units that don't have helicopters for those missions. It was to be powered by twin tilting ducted fans and have its own power system, fuel, digital flight controls, and remote command-and-control interfaces. The flight module would have different detachable mission modules for specific purposes including cargo delivery, CASEVAC, and ISR. Up to 3,000 lb (1,400 kg) of payload would be carried by a module.
The Boeing Phantom Ray is an American demonstration stealth unmanned combat air vehicle (UCAV) developed by Boeing. The autonomous Phantom Ray is a flying wing around the size of a conventional fighter jet, and first flew in April 2011. It will conduct a program of test flights involving surveillance, ground attack and autonomous aerial refueling missions. The developers say it can carry 4,500 pounds of payload.
KQ-X was a $33 million DARPA program awarded to Northrop Grumman on July 1, 2010. KQ-X investigated and developed autonomous aerial refueling techniques using two NASA Global Hawk high-altitude long endurance (HALE) unmanned aerial vehicles (UAVs).
The DARPA XS-1 was an experimental spaceplane/booster with the planned capability to deliver small satellites into orbit for the U.S. Military. It was reported to be designed to be reusable as frequently as once a day, with a stated goal of doing so for 10 days straight. The XS-1 was intended to directly replace the first stage of a multistage rocket by taking off vertically and flying to hypersonic speed and high suborbital altitude, enabling one or more expendable upper stages to separate and deploy a payload into low Earth orbit. The XS-1 would then return to Earth, where it could ostensibly be serviced fast enough to repeat the process at least once every 24 hours.
The Vertical Take-Off and Landing Experimental Aircraft program was an American research project sponsored by the Defense Advanced Research Projects Agency (DARPA). The goal of the program was to demonstrate a VTOL aircraft design that can take off vertically and efficiently hover, while flying faster than conventional rotorcraft. There have been many previous attempts, most of them unsuccessful as of 2015.
Tactically Exploited Reconnaissance Node (TERN), a joint program between DARPA and the U.S. Navy's Office of Naval Research (ONR), seeks to greatly increase the effectiveness of forward-deployed small-deck ships such as destroyers and frigates by enabling them to serve as mobile launch and recovery sites for specially designed unmanned aerial systems (UAS). These vehicles are to carry 600 pounds (270 kg) of ordnance in order to conduct combat strikes.
The Blohm & Voss P.202 was an unusual design study for a variable-geometry jet fighter during World War II. It was the first design to incorporate a slewed wing in which one side swept forward and the other back. The P.202 was never built or flown.
Mark Page is an American aerodynamicist and aerospace engineer. He is most known for his contributions to the design of UAVs and Blended Wing Body (BWB) aircraft. He is currently the co-founder and Chief Technology Officer (CTO) at JetZero.