Floor

This article needs additional citations for verification . Please help improve this article by adding citations to reliable sources. Unsourced material may be challenged and removed. Find sources:  "Floor"  –  news · newspapers · books · scholar · JSTOR (February 2017) ( Learn how and when to remove this message )

Examples of floors

A floor is the bottom surface of a room or vehicle. Floors vary from simple dirt in a cave to many layered surfaces made with modern technology. Floors may be stone, wood, bamboo, metal or any other material that can support the expected load.

Contents

• Special floor structures
• Floor covering
• Subfloor construction
• Ground floor construction
• Upper floor construction
• Utilities
• Problems with floors
• Floor cleaning
• See also
• References
• External links

The levels of a building are often referred to as floors, although sometimes referred to as storeys.

Floors typically consist of a subfloor for support and a floor covering used to give a good walking surface. In modern buildings the subfloor often has electrical wiring, plumbing, and other services built in. As floors must meet many needs, some essential to safety, floors are built to strict building codes in some regions.

Special floor structures

Where a special floor structure like a floating floor is laid upon another floor, both may be called subfloors.

Special floor structures are used for a number of purposes:

• Balcony, a platform projecting from a wall
• Floating floor, normally for noise or vibration reduction
• Glass floor, as in glass bottomed elevators
• Nightingale floor makes a noise when an intruder walks on it
• Raised floor, utilities underneath can be accessed easily
• Sprung floor, improves the performance and safety of athletes and dancers
• Raked floor, improves the view of performers on a stage for an audience

Floor covering

Floor covering is a term to generically describe any material applied over a floor structure to provide a walking surface. Flooring is the general term for a permanent or temporary covering of a floor, or for the work of installing such a floor covering. Both terms are used interchangeably but floor covering refers more to loose-laid materials.

Materials almost always classified as floor covering include carpet, area rugs, and resilient flooring such as linoleum or vinyl flooring. Materials commonly called flooring include wood flooring, laminated wood, ceramic tile, stone, terrazzo, and various seamless chemical floor coatings.

The choice of material for floor covering is affected by factors such as cost, endurance, noise insulation, comfort and cleaning effort, and sometimes concern about allergens. ^[1] Some types of flooring must not be installed below grade (lower than ground level), and laminate or hardwood should be avoided where there may be moisture or condensation.

The subfloor may be finished in a way that makes it usable without any extra work. See:

• Earthen floor adobe or clay floors
• Solid ground floor cement screed or granolithic

A number of special features may be used to ornament a floor or perform a useful service. Examples include floor medallions, which provide a decorative centerpiece of a floor design, or gratings used to drain water or to rub dirt off shoes.

Subfloor construction

Floors may be built on beams or joists ^[2] or use structures like prefabricated hollow core slabs. The subfloor builds on those and attaches by various means particular to the support structure, but the support and subfloor together always provides the strength of a floor one can sense underfoot. Nowadays, subfloors are generally made from at least two layers of moisture-resistant ("AC" grade, one side finished and sanded flat) plywood or composite sheeting, jointly also termed Underlayments on floor joists of 2x8, 2x10, or 2x12's (dimensional lumber) spaced generally on 16-inch (40.6 cm) centers, in the United States and Canada. Some flooring components used solely on concrete slabs consist of a dimpled rubberized or plastic layer much like bubble wrap that provide little tiny pillars for the one-half-inch (12.7 mm) sheet material above. These are manufactured in 2 ft × 2 ft (61 cm × 61 cm) squares and the edges fit together like a mortise and tenon joint. Like a floor on joists not on concrete, a second sheeting underlayment layer is added with staggered joints to disperse forces that would open a joint under the stress of live loads like a person walking.

Three layers are common only in highest-quality construction. The two layers in high-quality construction will both be thick 3⁄4 inch (19.1 mm) sheets (as will the third when present), but they may have a combined thickness of only half that in cheaper construction –1⁄2 in (12.7 mm) panel overlaid by 1⁄4 in (6.4 mm) plywood subflooring. At the highest end, or in select rooms of the building there might be three sheeting layers, and such stiff subflooring is necessary to prevent the cracking of large floor tiles of 9–10 inches (22.9–25.4 cm) or more on a side. The structure under such a floor will frequently also have extra "bracing" and "blocking" joist-to-joist intended to spread the weight to have as little sagging on any joist as possible when there is a live load on the floor above.

In Europe and North America only a few rare floors have no separate floor covering on top, and those are normally because of a temporary condition pending sales or occupancy; in semi-custom new construction and some rental markets, such floors are provided for the new home buyer or renter to select their preferred floor coverings, usually a wall-to-wall carpet or one-piece vinyl floor covering. Wood clad (hardwood) and tile covered finished floors generally require a stiffer, higher-quality subfloor, especially for the later class. Since the wall base and flooring interact forming a joint, such later added semi-custom floors will generally not be hardwood, for that joint construction would be in the wrong order unless the wall base trim was also delayed pending the choosing.

The subfloor may also provide underfloor heating and if floor radiant heating is not used, will certainly suffer puncture openings to be put through for forced air ducts for both heating and air conditioning, or pipe holes for forced hot water or steam heating transport piping conveying the heat from furnace to the local room's heat exchangers (radiators).

Some subfloors are inset below the top surface level of surrounding flooring's joists and such subfloors and a normal height joist are joined to make a plywood box both molding and containing at least two inches (5 cm) of concrete (A mud floor" in builders' parlance). Alternatively, only a slightly inset floor topped by a fibrous mesh and concrete building composite floor cladding is used for smaller high quality tile floors; these "concrete" subfloors have a good thermal match with ceramic tiles and so are popular with builders constructing kitchen, laundry and especially both common and high end bathrooms and any other room where large expanses of well supported ceramic tile will be used as a finished floor. Floors using small (4.5 in or 11.4 cm and smaller) ceramic tiles generally use only an additional 1⁄4-inch (6.4 mm) layer of plywood (if that) and substitute adhesive and substrate materials making do with both a flexible joints and semi-flexible mounting compounds and so are designed to withstand the greater flexing which large tiles cannot tolerate without breaking.

Upper floor construction

Floors in wood-frame homes are usually constructed with joists centered no more than 16 inches (41 centimeters) apart, according to most building codes.^{[ citation needed ]} Heavy floors, such as those made of stone, require more closely spaced joists. If the span between load-bearing walls is too long for joists to safely support, then a heavy crossbeam (thick or laminated wood, or a metal I-beam or H-beam) may be used. A "subfloor" of plywood or waferboard is then laid over the joists.

Utilities

Main article: Building services engineering

In modern buildings, there are numerous services provided via ducts or wires underneath the floor or above the ceiling. The floor of one level typically also holds the ceiling of the level below (if any).

Services provided by subfloors include:

• Air conditioning
• Communication fibers
• Electrical wiring
• Fire protection
• Thermal insulation
• Plumbing
• Sewerage
• Soundproofing
• Underfloor heating

In floors supported by joists, utilities are run through the floor by drilling small holes through the joists to serve as conduits. Where the floor is over the basement or crawlspace, utilities may instead be run under the joists, making the installation less expensive. Also, ducts for air conditioning (central heating and cooling) are large and cannot cross through joists or beams; thus, ducts are typically at or near the plenum, or come directly from underneath (or from an attic).

Pipes for plumbing, sewerage, underfloor heating, and other utilities may be laid directly in slab floors, typically via cellular floor raceways. However, later maintenance of these systems can be expensive, requiring the opening of concrete or other fixed structures. Electrically heated floors are available, and both kinds of systems can also be used in wood floors as well.

Problems with floors

Wood floors, particularly older ones, will tend to 'squeak' in certain places. This is caused by the wood rubbing against other wood, usually at a joint of the subfloor. Firmly securing the pieces to each other with screws or nails may reduce this problem.

Floor vibration is a problem with floors. Wood floors tend to pass sound, particularly heavy footsteps and low bass frequencies. Floating floors can reduce this problem. Concrete floors are usually so massive they do not have this problem, but they are also much more expensive to construct and must meet more stringent building requirements due to their weight.

Floors with a chemical sealer, like stained concrete or epoxy finishes, usually have a slick finish presenting a potential slip and fall hazard, however there are anti skid additives and coatings which can help mitigate this and provide increased traction. Reliable, science-backed floor slip resistance testing can help floor owners and designers determine if their floor is too slippery, or allow them to choose an appropriate flooring for the intended purpose before installation.

The flooring may need protection sometimes. A gym floor cover can be used to reduce the need to satisfy incompatible requirements.

Floor cleaning

Monk sweeping the floor (1472)

Sailors scrubbing the deck floor of the battleship HMS Rodney

Floor cleaning is a major occupation throughout the world and has been since ancient times. Cleaning is essential for hygiene, to prevent injuries due to slips, and to remove dirt. Floors are also treated to protect or beautify the surface. The correct method to clean one type of floor can often damage another, so it is important to use the correct treatment.

See also

Related Research Articles

Plywood is a composite material manufactured from thin layers, or "plies", of wood veneer that have been stacked and glued together. It is an engineered wood from the family of manufactured boards, which include plywood, medium-density fibreboard (MDF), oriented strand board (OSB), and particle board.

Flooring is the general term for a permanent covering of a floor, or for the work of installing such a floor covering. Floor covering is a term to generically describe any finish material applied over a floor structure to provide a walking surface. Both terms are used interchangeably but floor covering refers more to loose-laid materials.

Engineered wood, also called mass timber, composite wood, human-made wood, or manufactured board, includes a range of derivative wood products which are manufactured by binding or fixing the strands, particles, fibres, or veneers or boards of wood, together with adhesives, or other methods of fixation to form composite material. The panels vary in size but can range upwards of 64 by 8 feet and in the case of cross-laminated timber (CLT) can be of any thickness from a few inches to 16 inches (410 mm) or more. These products are engineered to precise design specifications, which are tested to meet national or international standards and provide uniformity and predictability in their structural performance. Engineered wood products are used in a variety of applications, from home construction to commercial buildings to industrial products. The products can be used for joists and beams that replace steel in many building projects. The term mass timber describes a group of building materials that can replace concrete assemblies.

Soundproofing is any means of impeding sound propagation. There are several methods employed including increasing the distance between the source and receiver, decoupling, using noise barriers to reflect or absorb the energy of the sound waves, using damping structures such as sound baffles for absorption, or using active antinoise sound generators.

Seismic retrofitting is the modification of existing structures to make them more resistant to seismic activity, ground motion, or soil failure due to earthquakes. With better understanding of seismic demand on structures and with recent experiences with large earthquakes near urban centers, the need of seismic retrofitting is well acknowledged. Prior to the introduction of modern seismic codes in the late 1960s for developed countries and late 1970s for many other parts of the world, many structures were designed without adequate detailing and reinforcement for seismic protection. In view of the imminent problem, various research work has been carried out. State-of-the-art technical guidelines for seismic assessment, retrofit and rehabilitation have been published around the world – such as the ASCE-SEI 41 and the New Zealand Society for Earthquake Engineering (NZSEE)'s guidelines. These codes must be regularly updated; the 1994 Northridge earthquake brought to light the brittleness of welded steel frames, for example.

This page is a list of construction topics.

Underlay may refer to flooring or roofing materials, bed padding, or a musical notation.

Vinyl composition tile (VCT) is a finished flooring material used primarily in commercial and institutional applications. Modern vinyl floor tiles and sheet flooring and versions of those products sold since the early 1980s are composed of colored polyvinyl chloride (PVC) chips formed into solid sheets of varying thicknesses by heat and pressure. Floor tiles are cut into modular shapes such 12-by-12-inch squares or 12-by-24-inch rectangles. In installation the floor tiles or sheet flooring are applied to a smooth, leveled sub-floor using a specially formulated vinyl adhesive or tile mastic that remains pliable. In commercial applications some tiles are typically waxed and buffed using special materials and equipment.

Framing, in construction, is the fitting together of pieces to give a structure support and shape. Framing materials are usually wood, engineered wood, or structural steel. The alternative to framed construction is generally called mass wall construction, where horizontal layers of stacked materials such as log building, masonry, rammed earth, adobe, etc. are used without framing.

A concrete slab is a common structural element of modern buildings, consisting of a flat, horizontal surface made of cast concrete. Steel-reinforced slabs, typically between 100 and 500 mm thick, are most often used to construct floors and ceilings, while thinner mud slabs may be used for exterior paving.

Formwork is molds into which concrete or similar materials are either precast or cast-in-place. In the context of concrete construction, the falsework supports the shuttering molds. In specialty applications formwork may be permanently incorporated into the final structure, adding insulation or helping reinforce the finished structure.

A batten is most commonly a strip of solid material, historically wood but can also be of plastic, metal, or fiberglass. Battens are variously used in construction, sailing, and other fields.

A raised floor provides an elevated structural floor above a solid substrate to create a hidden void for the passage of mechanical and electrical services. Raised floors are widely used in modern office buildings, and in specialized areas such as command centers, Information technology data centers and computer rooms, where there is a requirement to route mechanical services and cables, wiring, and electrical supply. Such flooring can be installed at varying heights from 2 inches (51 mm) to heights above 4 feet (1.2 m) to suit services that may be accommodated beneath. Additional structural support and lighting are often provided when a floor is raised enough for a person to crawl or even walk beneath.

Underfloor heating and cooling is a form of central heating and cooling that achieves indoor climate control for thermal comfort using hydronic or electrical heating elements embedded in a floor. Heating is achieved by conduction, radiation and convection. Use of underfloor heating dates back to the Neoglacial and Neolithic periods.

A sprung floor is a floor that absorbs shocks, giving it a softer feel. Such floors are considered the best kind for dance and indoor sports and physical education, and can enhance performance and greatly reduce injuries. Modern sprung floors are supported by foam backing or rubber feet, while traditional floors provide their spring through bending woven wooden battens.

Screed has three meanings in building construction:

1. A flat board or a purpose-made aluminium tool used to smooth and to "true" materials like concrete, stucco and plaster after they have been placed on a surface or to assist in flattening;
2. A strip of plaster or wood applied to a surface to act as a guide for a screed tool ;
3. The material itself which has been flattened with a screed. In the UK, screed has also come to describe a thin, top layer of material, poured in situ on top of the structural concrete or insulation, on top of which other finishing materials can be applied, or the structural material can be left bare to achieve a raw effect.

Wood flooring is any product manufactured from timber that is designed for use as flooring, either structural or aesthetic. Wood is a common choice as a flooring material and can come in various styles, colors, cuts, and species. Bamboo flooring is often considered a form of wood flooring, although it is made from bamboo rather than timber.

A concrete moisture meter is a type of moisture meter used by installers of flooring to measure the moisture levels of concrete. These meters have been used for decades to measure the moisture content in different materials and substances. Concrete meters have evolved from the successful wood moisture meter as flooring contractors tried to use their wood meters to measure the moisture in concrete.

Underfloor air distribution (UFAD) is an air distribution strategy for providing ventilation and space conditioning in buildings as part of the design of a HVAC system. UFAD systems use an underfloor supply plenum located between the structural concrete slab and a raised floor system to supply conditioned air to supply outlets, located at or near floor level within the occupied space. Air returns from the room at ceiling level or the maximum allowable height above the occupied zone.

Sheet vinyl flooring is vinyl flooring that comes in large, continuous, flexible sheets. A vinyl sheet floor is completely impermeable to water, unlike vinyl floor tile, which comes in stiff tiles, and vinyl planks, which come in interlocking strips. It is sometimes called linoleum after a visually similar product of different chemical composition.

References

External links

Look up floor in Wiktionary, the free dictionary.

Media related to Floors at Wikimedia Commons