Segítség:QuickStatements

A Commonson a QuickStatements segítségével a Wikidatára feltöltött sablonok által használt ikon

QuickStatements

2019 Coolest Tool Award Winner

in the category
Editor

A QuickStatements (QS) egy Magnus Manske által írt eszköz, amely egyszerű szöveges parancsok alapján képes szerkeszteni a Wikidata elemeket. Az eszköz képes állítások, címkék, leírások és aliasok hozzáadására és eltávolítására; valamint opcionális minősítőkkel és forrásokkal ellátott állítások hozzáadására. A parancssorozat beírható az importáló ablakban, vagy létrehozható egy táblázatkezelőben vagy szövegszerkesztőben, és beilleszthető. Létrehozható külső kóddal is, mint például Lua, egy sablonból meghívva és URL-ként átadva. A OpenRefine-ben szerkesztett adatok a QuickStatements formátumba is exportálhatók.

Eszközök

A QuickStatements eszköz több iteráción és átdolgozáson ment keresztül. Amikor csak lehetséges, mindig az eszköz aktuális verzióját kell használni. A QuickStatements több verziója is elérhető:

• QuickStatements version 2 (V2) átdolgozás vagy új interfész (jelenlegi verzió).
• Kiadási előzmények
  • QuickStatements version 2 (V2) eredeti vagy régi felület
  • QuickStatements 1. verzió (V1) (már nem működik)

A verziók közötti szintaxis némileg eltérhet. A dokumentum többi része az aktuális verzió szintaxisát írja le, de megjelöli azokat a részeket, amelyek a korábbi verziókban nem voltak támogatottak.

Parancssorrend

Ez a szakasz az eszköz V1 verziója óta használt szintaxist írja le, néha úgy hivatkozunk ezekre mint V1 parancsok.

Egyszerű állítás hozzáadása

A hozzáadandó utasításokat az eszköz szövegmezőjébe történő beírással/beillesztéssel adhatod meg. Az állítások különböző részeit TAB vagy "|" karakterek választják el. Minden egyes parancs vagy új sorban van, vagy "||" karakterekkel van elválasztva. Tipp: Használhatsz táblázatszerkesztő szoftvert is, például Microsoft Excel vagy LibreOffice Calc; a cellák másolása/beillesztése automatikusan beilleszti a TAB-eket. Az olyan szövegszerkesztők, mint a Notepad++ szintén lehetővé teszik bármely szimbólum TAB karakterrel (\t) való helyettesítését.

Minden kötelezően tartalma egy entity, egy property, és egy value. Egy entity lehet egy item, egy property, egy lexeme, egy form, vagy egy sense. Egy value lehet egy másik entity, egy string, egy time, egy location, vagy egy quantity, a tulajdonság típusától függően, vagy a somevalue vagy novalue speciális értékek egyike (lásd Nem ismert vagy értékek nélküli).

Az egyes részek formázása:

• Items on Wikidata are always in the form Qxx. On Commons they are always in the form Mxx. In QuickStatements version 1 one could use an article name instead of the q-code, if one filled in a xxwiki value in the input box above the text area; the correct item number (if available) was retrieved automatically.

  Example: Q4115189 TAB P31 TAB Q1

  Meaning: add to Wikidata Sandbox (Q4115189)instance of (P31)Universe (Q1)

• Properties in the form Pxx.
• Lexemes in the form Lxxx.
• Forms in the form Lxxx-Fyy.
• Senses in the form Lxxx-Syy.
• Strings (including URLs, and numerical values of text fields, for example external-ID property values) must be in "double quotes". Many statements take values in string format, including external identifiers (like VIAF ID (P214)), filenames (like image (P18)) or other page names (like Commons category (P373)).

  Example: Q41576278 TAB P373 TAB "Antoni Ignacy Mietelski"

  Meaning: add to Antoni Ignacy Mietelski (Q41576278)Commons category (P373)Antoni Ignacy Mietelski

  Caution: Some characters in the string seem to confuse the tool. Those include: "_" (underscore), " (double quote), " " (spaces), "=", and possibly more. Adding URLs with those characters, like this one or this might fail. String and URLs with those characters might work when interacting with the tool through the interface but fail when interacting through URL.

• Monolingual text prefix text in "double quotes" with the language and a colon, e.g. en:"Some text"

  Example: Q1214098 TAB P1476 TAB pl:"Krzyżacy"

  Meaning: add to The Knights of the Cross (Q1214098)title (P1476)"Krzyżacy" (Polish)

• Time values must be in format eg +1967-01-17T00:00:00Z/11, where /11 designates the precision. The precision is: 0 - billion years, 1 - hundred million years, ..., 6 - millennium, 7 - century, 8 - decade, 9 - year (default), 10 - month, 11 - day, 12 - hour, 13 - minute, 14 - second.

  Example: Q41576483 TAB P569 TAB +1839-00-00T00:00:00Z/9

  Meaning: add to Bronisław Podbielski (Q41576483)date of birth (P569)+1839

  Use "+" for CE dates and "-" for BCE dates; and use at least 4 digits.

  Set an additional "/J" if you want to set the date in Julian Calendar (see this list to understand where this should be done).

  If submitting to the API, use "%09" instead of the TAB symbol, "%2B" instead of the "+" symbol, "%3A" instead of the ":" symbol, and "%2F" instead of the "/" symbol.

• Location coordinates in the form of @LAT/LON, with LAT and LON as decimal numbers.

  Example: Q3669835 TAB P625 TAB @43.26193/10.92708

  Meaning: add location to San Dalmazio (Q3669835)

• Quantity in the form of amount~toleranceUxx, with amount and tolerance being a rational numbers and Uxx being the item number of a unit (Qxx). Unit and tolerance values are optional. Don't leave any spaces in the quantity definition.

  QuickStatements version 1 used different syntax for Quantity: amount[lower,upper]Uxx, with amount, lower and upper being a rational numbers.

  lower, upper are optional and must be either both present or both absent. When present, they should be enclosed in square brackets and separated by ,

  amount, lower and upper must use . as decimal separator, must not use any thousands separator and may be prefixed by "+" or "-".

  10, 10U11573, -10[-12.5,-7.5], 0[-5,5]U11573 are all valid quantities (where U11573 indicates metre (Q11573))

  Quantities with tolerance may be entered as 1.2~0.3 in QuickStatements version 2, which is the same as 1.2[0.9,1.5] in QuickStatements version 1 and means 1.2±0.3.

• somevalue for unknown value Help
• novalue for no value Help. Both novalue and somevalue should be used without double quotes around it. Both of those statements do work as part of item creation statements using CREATE and LAST keywords.

Állítások megadása minősítőkkel

Minden állítást korlátlan számú minősítő követhet (tulajdonság TAB érték)

Például: Q41577083 TAB P570 +1586-00-00T00:00:00Z/11 TAB P1319 TAB +1586-00-00T00:00:00Z/9

Jelentése: az elem feltöltése a következő adatokkal: Gian Federigo Bonzagna (Q41577083)date of death (P570)16. centuryearliest date (P1319)+1586

Example: Q41577083 TAB P570 TAB +1600-00-00T00:00:00Z/7 TAB P1319 TAB +1586-00-00T00:00:00Z/9

Meaning: add to Gian Federigo Bonzagna (Q41577083)date of death (P570)16. centuryearliest date (P1319)+1586

Állítások megadása forrásokkal

Minden állítást korlátlan forrás követhet (forrástulajdonság TAB érték).

Például: Q22124656 TAB P21 TAB Q6581097 TAB S143 TAB Q24731821 TAB S813 TAB +2017-10-04T00:00:00Z/11

Jelentése: Gotō Ichijō (Q22124656)sex or gender (P21)male (Q6581097) a következő forrásokkal: imported from Wikimedia project (P143)Commons Creator page (Q24731821)retrieved (P813)4 October 2017

By default, all sources will go into the same "reference group" (a block of property/value pairs). If you want to create more than one reference group in a single command row, simply prefix the first source property of the new group with an exclamation mark: "!Sxx" instead of "Sxx". (In the first reference group, the "!" is optional and will not influence the outcome.)

Megjegyzések:

• Már létező állítások nem adódnak hozzá még egyszer, azonban a forrásokra ez nem igaz.
• You can mix qualifiers and references in the same statement. Just use Sxx instead of Pxx when using sources.
• A QuickStatements 1-es verziójában minden forrástulajdonsághoz saját bejegyzés tartozott (nem rendeződtek csoportba), ez a 2-es verzióban javítva lett.

Címkék, más nevek, leírások és interwikik hozzáadása

As with adding simple text statements, each command must consist of an item, a command, and a string in double quotes.

• To add a label in a specific language to an item, use "Lxx" instead of a property, with "xx" as the language code.

  Example: Q340122 TAB Lpl TAB "Cyprian Kamil Norwid"

  Meaning: add Polish label "Cyprian Kamil Norwid" to Cyprian Norwid (Q340122)

• To add an alias in a specific language to an item, use "Axx" instead of a property, with "xx" as the language code.

  Example: Q340122 TAB Aen TAB "Cyprjan Kamil Norwid"

  Meaning: add English alias "Cyprjan Kamil Norwid" to Cyprian Norwid (Q340122)

  Tip: Multiple aliases can be added at the same time by separating them with the pipe character ("|"). Warning: This does not work when creating a new item (magnusmanske/quickstatements_rs#3)

  Example: Q340122 TAB Aen TAB "Cyprian Kamil Norwid|Cypryan Kamil Norvid"

• To add a description in a specific language to an item, use "Dxx" instead of a property, with "xx" as the language code.

  Example: Q340122 TAB Dde TAB "polnischer Dichter"

  Meaning: add German description "polnischer Dichter" to Cyprian Norwid (Q340122)

• To add a sitelink to a specific page on a site to an item, use "Sxxx" instead of a property, with "xxx" as the site (e.g. enwiki, commonswiki).

  Example: Q340122 TAB Szhwiki TAB "塞浦路斯·諾爾維特"

  Meaning: add sitelink to Chinese Wikipedia (塞浦路斯·諾爾維特) to Cyprian Norwid (Q340122)

If you want to remove a label/alias/description/sitelink, the value has to be an empty string and the rest of the command will be the same.

Elemek létrehozása

You can create new items by inserting a line consisting only of the word "CREATE". To add statements to the newly created item, use the word "LAST" instead of the Q number, and the statement will be added to the last created item.

An example for creating a new item, adding a sitelink, and setting a label:

CREATE

LAST TAB Sfrwiki TAB "Le croissant magnifique!"

LAST TAB Lfr TAB "Le croissant magnifique!"

Meaning: create a new item with a link to French Wikipedia w:fr:Le croissant magnifique! and with French label "Le croissant magnifique!"

Properties may be created in the same way with "CREATE_PROPERTY" followed by a TAB or | and the entity type, e.g. one of:

commonsMedia, globe-coordinate, wikibase-item, wikibase-property, string, monolingualtext, external-id, quantity, time, url, math, geo-shape, musical-notation, tabular-data, wikibase-lexeme, wikibase-form, wikibase-sense.

This is mostly of use on third-party Wikibase instances, as property creation is restricted on Wikidata.

Elemek összevonása

Összevonhatsz két elemet. Ezzel az újabb elemet beleolvasztod a régebbibe, majd (ha a beleolvasztás sikerült) átirányítod rá.

MERGE TAB Q1 TAB Q2

Állítások törlése

You can remove specific statements by prefixing a line with "-".

Example: -Q4115189 TAB P31 TAB Q1

Meaning: remove from Wikidata Sandbox (Q4115189)instance of (P31)Universe (Q1)

Dates with precision>9 can be removed via their specific date:

-Q98426308	P585	+1988-05-11T00:00:00Z/11

Dates with precision≤9 may use either 00-00 or 01-01 as their month-date value, so it may be necessary to attempt to remove both:

-Q98426308	P585	+1988-01-01T00:00:00Z/9
-Q98426308	P585	+1988-00-00T00:00:00Z/9

In addition you may remove statements with a specific statement ID using the following syntax:

-STATEMENT TAB Q1$00000000-0000-0000-0000-000000000000

The statement ID can be received by:

• The source code of any entity page, where the ID may be found in the <div> elements with "wikibase-statementview" class
• API
• name of statement node in RDF which may be queried by query service (you need to replace the - after entity ID with $)

Comments

Every command can have a comment at its end, which will be inserted into the edit summary for the command. Use the /* ... */ syntax. Before this a TAB may be inserted. Spaces around the comment will be removed before processing. The tool splits adding of a claim and its reference in two edits. When using the "version 1 format" import it seems not to be possible to add a comment for the edit adding the reference. The comment is added to the edit adding the claim (if the claim does not exist yet and is added at all).

Example: Q4115189 TAB P31 TAB Q1 /* This is a comment. */

Meaning: add to Wikidata Sandbox (Q4115189)instance of (P31)Universe (Q1), with "This is a comment." in the edit summary.

A CSV-állományok felépítése

Commands

In QuickStatements version 2, one can also cut and paste a properly structured CSV file as an alternative to the syntax introduced in QuickStatements version 1. The file will specify commands (columns) to execute and their data (rows). The first line is a header row describing how the data in each column is to be interpreted.

For example, a column called P31 could contain the value Q5 to create a statement with property P31 and value Q5.

For some reason, string values need to be put in """triple double quotations""".

qid

Always the first column of commands: the values in the column should contain the id of the item or entity to edit. If the cell is left empty, a new item will be created. See the item creation sample below.

The other columns may specify the following commands:

P1234

A property ID (uppercase) begins a new statement. The column value specifies the main value of the statement, in the same format as in QuickStatements version 1.

qal1234

A lowercase "qal" followed by a property number (without "P") adds a qualifier to the current statement. The column value specifies the value of the qualifier, in QuickStatements version 1 syntax. There must be some "P" column before a "qal" column to specify which statement the qualifier is added to.

S1234

An uppercase "S" followed by a property number (without "P") begins a new source for the current statement. The column value specifies the value of the source, in QuickStatements version 1 syntax. There must be some "P" column before an "S" column to specify which statement the source is added to.

s1234

A lowercase "s" followed by a property number (without "P") adds another property-value pair to the current source. The column value specifies the value of the source, in QuickStatements version 1 syntax. There must be some "S" column before an "s" column to specify which source the property-value pair is added to.

Len

An uppercase "L" followed by a language code sets the label in that language.

Dfr

An uppercase "D" followed by a language code sets the description in that language.

Ade

An uppercase "A" followed by a language code adds an alias in that language.

Senwiki

An uppercase "S" followed by a site ID adds a sitelink to that site.

#

A number sign character sets the edit summary (comment) of the preceding command. The tool splits adding of a claim and its reference in two edits. A comment can be added to the edit summary of each of them. For the claim by putting a "#" column between the columns for the claim and its reference, for the reference by putting a "#" column behind its columns. For example:

qid,P21,#,S143,s813,#
Q22124656,Q6581097,comment to claim adding edit,Q24731821,+2017-10-04T00:00:00Z/11,comment to reference adding edit

Item creation

To create a new item, the first element of the row needs to be empty, so the line starts with a ,.

For example

qid,Len,Den,P31
,Regina Phalange,fictional character,Q95074

For example

creates a new item. Suitable for LibreOffice (paste in cell A1)

filename	label	description	qid,P31,Len,Den,P18
Mona Lisa - the Louvre.jpg	Mona Lisa	oil painting by Leonardo da Vinci, Louvre	=",Q3305213,"""&B2&""","""&C2&""","""""""&A2&""""""""
Mona Lisa - the Louvre.jpg	Mona Lisa	oil painting by Leonardo da Vinci, Louvre	,Q3305213,"Mona Lisa","oil painting by Leonardo da Vinci, Louvre","""Mona Lisa - the Louvre.jpg"""

Statement removal commands

Statement column headers may also begin with "-" to remove the statement. (Note that this is only valid in the header for the whole column, not in individual values.) Removing other column types is not yet supported and will result in an error when the command is run; however, sitelinks and labels can be removed by setting them to the empty string (without "-" in the column header).

qid,P31,-P31
Q4115189,Q5,Q5

Adds to the sandbox item a P31 value of human (Q5) and then removes that same statement again.

Commas and double quotes

Labels, descriptions, aliases and sitelinks do not need to be in double quotes unless they themselves contain commas (,) or double quotes (").

In this case, replace all double quotes with two double quotes (e.g. Toys "R" Us → Toys ""R"" Us) and then wrap the string in a pair of double quotes (e.g. "Toys ""R"" Us").

Samples: Toys "R" Us and Patterns, Predictors, and Outcome

qid,Len
Q4115189,"Toys ""R"" Us"
Q4115189,"Patterns, Predictors, and Outcome"

To add a string value containing double quotes ("), replace all double quotes with two double quotes ("").

As any string value, then wrap it in three double quotes ("""), e.g. """Toys ""R"" Us""".

Samples for Q4115189#P370, notably Toys "R" Us

qid,P370
Q4115189,"""Toys ""R"" Us"""
Q4115189,"""Patterns, Predictors, and Outcome"""
Q4115189,"""Wikidata sandbox item 1"""

Combined sample

qid,Len,Den,Aen,P31,-P31,P21,P735,qal1545,S248,s214,S143,Senwiki
Q4115189,Douglas Adams,author,Douglas Noël Adams,Q5,Q36180,Q6581097,Q463035,"""1""",Q54919,"""113230702""",Q328,Douglas Adams
Q4115189,"Toys ""R"" Us",testin sample,Toys R Us,Q5,Q36180,Q6581097,Q463035,"""1""",Q54919,"""113230702""",Q328,"Toys ""R"" Us"

Samples by value type

Samples use the sandbox item (Q4115189) and can be pasted directly into QuickStatements for testing. Should be risk-free.

Label

qid,Len
Q4115189,Sandbox
Q4115189,"Patterns, Predictors, and Outcome"
Q4115189,"Toys ""R"" Us"

Description

qid,Den
Q4115189,Wikidata item for tests
Q4115189,"sample for Patterns, Predictors, and Outcome"
Q4115189,"description sample for Toys ""R"" Us"

Alias

qid,Aen
Q4115189,Wikidata sandbox
Q4115189,"Predictors, Patterns, and Outcome"
Q4115189,"Toys ""4"" You"

Item

qid,P369
Q4115189,Q5
Q4115189,somevalue
Q4115189,novalue
L123,Q5
L123-S1,Q5
L123-F1,Q5

somevalue is for unknown value Help, novalue for no value Help. F1 and S1 on Lexeme:L123 would have to exist for it to work.

String or external identifiers (external-id)

qid,P370
Q4115189,"""Sandbox"""
Q4115189,"""Patterns, Predictors, and Outcome"""
Q4115189,"""Toys ""R"" Us"""

Monolingual text

qid,P1450
Q4115189,en:"Sandbox"
Q4115189,en:"Toys "R" Us"
Q4115189,"en:""Toys ""R"" Us"""
Q4115189,"en:""Patterns, Predictors, and Outcome"""

en is for English

Date/time

qid,P577
Q4115189,+1856-01-01T00:00:00Z/9
Q4115189,+1856-01-01T00:00:00Z/10
Q4115189,+1856-01-01T00:00:00Z/11

Precisions are 9=year, 10=month, 11=day, so the dates are 1856, January 1856 and 1 January 1856.

Image/Commons media file

qid,P18
Q4115189,"""Frans Breydel - A merry company.jpg"""
Q4115189,"""'Girl Reading' by Mary Colman Wheeler, El Paso Museum of Art.JPG"""
Q4115189,"""Kaubalaeva ""E. Russ"" vrakk.jpg"""
Q4115189,"""''L'empereur Napoleon III'' de Franz-Xaver Winterhalter.jpg"""

Images are:

• File:Frans Breydel - A merry company.jpg
• File:'Girl Reading' by Mary Colman Wheeler, El Paso Museum of Art.JPG (includes a single quote and a comma)
• File:Kaubalaeva "E. Russ" vrakk.jpg (includes double quotes)
• File:''L'empereur Napoleon III'' de Franz-Xaver Winterhalter.jpg

URL

qid,P856
Q4115189,"""https://example.com/"""
Q4115189,"""https://example.com/equalsign=test"""
Q4115189,"""https://example.com/underscore_test"""

Coordinates

qid,P625
Q4115189,@43.26193/10.92708

Quantity

qid,P1114
Q4115189,10
Q4115189,+20
Q4115189,+3.1415926
Q4115189,-40
Q4115189,5.5U11574
Q4115189,+60U11573
Q4115189,+7.5U11574
Q4115189,-80~1.5
Q4115189,2.2~0.3
Q4115189,+1.2~0.3

U11573 is for metre (Q11573), U11574 for second (Q11574). Note the odd result of 1.2~0.3.

Full example

Full examples can be found at Help:QuickStatements/examples.

Running QuickStatements

Using QuickStatements version 2

QuickStatements V2 intro screen

Here is how to use QuickStatements (version 2) in basic mode:

1. Go to https://quickstatements.toolforge.org
2. Make sure you are logged into OAuth and your name is visible in the upper-right corner. If not, then log in.
3. Click "New batch".
4. For working with Wikimedia Commons Structured Data:
   1. Look for the pull-down menu Create new command batch for ... and change project from Wikidata to Commons [Batch mode only!]
   2. You need "M" ids to work on instead of "Q" numbers. Look up the media identifiers for Commons files with the Minefield tool
   3. Use statements in the form of "MXXXX|PXX|QXXX" or use the CSV format option
   4. Initiate the query with the "Run" or "Run in the background" button to run it in the batch mode
5. Cut and paste your commands. See the syntax in the section above.
6. When you are done, click "Import V1 commands" or "Import CSV commands".
7. The tool will convert your commands into human-readable form. Inspect them and click "Run" or "Run in the background" to execute
8. As your commands are being processed, double-check the results, and press "STOP" if you detect a problem.
9. The user interface will tell you when all commands have been processed.

• 
  Preparing commands in a spreadsheet
• 
  Cut-and-paste the cells directly into the QS import window
• 
  QS converted your commands into human-readable form and waits for approval
• 
  QS executing the commands. Please see "Stop" button.
• 
  QS completed the task.

Using QuickStatements version 1

Screenshot of using QuickStatements version 1

QuickStatements version 1 is still available, but no longer maintained. It has stopped working for some users, but still works fine for others.

1. Go to https://wikidata-todo.toolforge.org/quick_statements.php
2. Cut and paste your commands into the window
3. Click "Do it"
4. The user interface will tell you when all statements have been processed.

Using QuickStatements version 2 in batch mode

When to use batch mode?

QuickStatements version 2 has the "Run in background" button

Batch mode (also known as running in the background or asynchronous batch mode) means your statements are executed from a Wikimedia server, rather than from your Web browser. This has several advantages:

• Even if you close your browser or if your computer crashes, the statements will be executed until the last one.
• You can launch several batches in parallel, without slowing down your computer. (The batches seem to be run sequentially)
• You get a unique URL for your batch, to which you can refer later. This page shows some statistics about your run.
• To see all your recent batches click "Your last batch". To see everybody else's recent batches click "Last batches"
• You or a project admin can stop your batch by going to its URL. For instance, if it is realized that the batch is erroneous and you are offline, an admin can stop it immediately (by going to the individual batch page), rather than having to block you.
• If you discover that something went wrong, you can revert the whole batch afterwards

But there are also drawbacks:

• It takes a few more clicks, so as a rule of thumb, if you only have 10 or fewer statements, it's better to run them in normal mode.
• Depending on how busy the server is it might take time for your batch to start so that checking the results might not be possible immediately.
• There is a limit on the number of statements in a batch, and batches with more statements do not load properly (showing blank page and revolving circle). For simpler statements, the maximum seems to be around 25 thousand statements per batch, but it is much smaller for more complex statements.
• Batch mode seems to work well for simple statements without qualifiers or references, but more complex statements (where, for example, the successful addition of a qualifier depends on the base statement being already present), there seems to be a much higher error rate.

Before running a batch, it can be a good idea to run a few commands directly in non-batch mode to get a good view of what is being done.

Using batch mode

1. Prepare your statement normally as described in the Using QuickStatements version 2 section above
2. Instead of pressing "Run", press the "Run in background" button.
3. "Your last batches" will show a list of the most recent batches run by you, with statistics.

The following statistical values are available:

• DONE: The number of statements that were successfully run
• ERROR: The number of statements that failed
• INIT: The number of statements left to run
• RUN: The number of statements being run right now

Running QuickStatements by URL

What you should see if you click on the example link in this section

An alternative way of communicating with QuickStatements is to use a URL instead of cutting and pasting commands into the import window. For example, a command to add to Emile Justin Merlot (Q37887397)VIAF ID (P214)"96480189" with source imported from Wikimedia project (P143)Wikimedia Commons (Q565) is Q37887397 TAB P214 TAB "96480189" TAB S143 TAB Q565. You can also generate a prefilled QuickStatements window with https://quickstatements.toolforge.org/#/v1= Q37887397%7CP214 %7C%2296480189%22%7C S143%7CQ565 or https://quickstatements.toolforge.org/#/v1=Q37887397%7CP214%7C%2296480189%22%7CS143%7CQ565. The steps of converting V1 syntax to URL are:

1. replace TAB with "|" and newline with "||"
2. apply URL encoding to the string, which will replace "|" with "%7C", double quote with "%22", space with "%20", slash "/" with "%2F", etc.
3. put https://quickstatements.toolforge.org/#/v1= in front of it

Many templates on Commons, like c:Template:Creator or c:Template:Artwork use that technique to package information that can be imported to Wikidata into a clickable URL.

Hints:

• [[File:Commons to Wikidata QuickStatements.svg|20px|link=https://quickstatements.toolforge.org/#/v1=Q37887397%7CP214%7C%2296480189%22%7CS143%7CQ565]] will encode the URL within a handy clickable icon: (click it but do not click "run"; pressing it will not work since that item already has that property).
• Pages with QuickStatements URLs may be located through Special:LinkSearch (see here) or through a database query calling externallinks table (see for example here).

Clients

- Python

Korlátozások

A QuickStatements 2-es verziójával jelenleg nem lehet:

• elemeket összevonni (az 1-essel igen)
• rangsorokat hozzáadni
• naptártípust megadni
• földrajzi helyek pontosságát megadni

Note that for using QuickStatements, an account needs to be autoconfirmed. Also there is no way for users using bot accounts to mark their edits as bot edit (but there is an open ticket to address that).

GYIK

Can QuickStatements add reference statements with more than one claim?

Yes, current QuickStatements can add references that have for example both imported from Wikimedia project (P143) and retrieved (P813) (see here) or both stated in (P248) and page(s) (P304).

How do I experiment with QuickStatements?

Use Wikidata Sandbox (Q4115189).

How do I report issues with the tool?

Check with other users at the talk page or at Wikidata:Project chat. Confirmed bugs should be reported on Phabricator after reading mw:How to report a bug.

Where do I suggest new features?

You can ask at tool's Git page or at User:Magnus Manske/quick statements2, but be aware that we keep Magnus busy!

What is the maximum number of commands I can enter at once?

Not documented. It was already tested with over 11,000 commands. But note that such large batch runs will take several hours to complete.

Best practices

• QuickStatements allows edits ranging from single statement to multi-thousand-item batch runs. Very large runs or potentially-controversial runs should go through the approval process described in Wikidata:Bots.
• Users should avoid creating duplicate items.
• All statements should have references as per Help:Sources. That might be less important for identifiers, like VIAF ID (P214) or RKDartists ID (P650), etc.
• Users doing the edits are responsible for fixing or undoing their changes if issues are found. See about statement removal.
• This tool does not properly honor maxlag. This is generally not a problem, because the actions of the tool are limited by the usual edit limits of the controlling user. This can, however, cause problems if the controlling user is not subject to edit limits (e.g. admins).

Using the API to start batches

If you are logged in on QuickStatements, you can get a token on your user page. That page also contains information about how to use the token to submit batches programmatically. You need to have submitted at least one server-side batch manually before for this to work!

Edit groups

QuickStatements V2 creates edit groups for all individual batches. You may discuss individual edit groups, or rollback the whole edit group.

EditGroups is another external tool, not part of QuickStatements. Currently it works on Wikidata, and there is also an instance for Commons. On other Wikibase instances, it may be unavailable.

Lásd még

• Eszköz CSV-állományok QuickStatements-parancsokká konvertálásához
• Források összegyűjtése Zoteróban, majd ezek QuickStatements-parancsokká alakítása

Tools that export to QuickStatements

• Zotero export translator to QuickStatements format in zotkat: allows the collection of references in Zotero, which can then be exported to QuickStatements for uploading to Wikidata
• topictagger: finds potentially missing main subject (P921)
• New-Q5: form for updating or creating an item that describes a person

References