Thermodynamic potential

Thermodynamics
The classical Carnot heat engine
Branches Classical Statistical Chemical Quantum thermodynamics Equilibrium  / Non-equilibrium
Laws Zeroth First Second Third
Systems Closed system Open system Isolated system State Equation of state Ideal gas Real gas State of matter Phase (matter) Equilibrium Control volume Instruments Processes Isobaric Isochoric Isothermal Adiabatic Isentropic Isenthalpic Quasistatic Polytropic Free expansion Reversibility Irreversibility Endoreversibility Cycles Heat engines Heat pumps Thermal efficiency
System properties Note: Conjugate variables in italics Property diagrams Intensive and extensive properties Process functions Work Heat Functions of state Temperature  / Entropy  (introduction) Pressure  / Volume Chemical potential  / Particle number Vapor quality Reduced properties
Material properties Property databases Specific heat capacity   ${\displaystyle c=}$ ${\displaystyle T}$ ${\displaystyle \partial S}$ ${\displaystyle N}$ ${\displaystyle \partial T}$ Compressibility   ${\displaystyle \beta =-}$ ${\displaystyle 1}$ ${\displaystyle \partial V}$ ${\displaystyle V}$ ${\displaystyle \partial p}$ Thermal expansion   ${\displaystyle \alpha =}$ ${\displaystyle 1}$ ${\displaystyle \partial V}$ ${\displaystyle V}$ ${\displaystyle \partial T}$
Equations Carnot's theorem Clausius theorem Fundamental relation Ideal gas law Maxwell relations Onsager reciprocal relations Bridgman's equations Table of thermodynamic equations
Potentials Free energy Free entropy Internal energy ${\displaystyle U(S,V)}$ Enthalpy ${\displaystyle H(S,p)=U+pV}$ Helmholtz free energy ${\displaystyle A(T,V)=U-TS}$ Gibbs free energy ${\displaystyle G(T,p)=H-TS}$
History Culture History General Entropy Gas laws "Perpetual motion" machines Philosophy Entropy and time Entropy and life Brownian ratchet Maxwell's demon Heat death paradox Loschmidt's paradox Synergetics Theories Caloric theory Vis viva("living force") Mechanical equivalent of heat Motive power Key publications An Inquiry Concerning the Source ... Friction On the Equilibrium of Heterogeneous Substances Reflections on the Motive Power of Fire Timelines Thermodynamics Heat engines Art Education Maxwell's thermodynamic surface Entropy as energy dispersal
Scientists Bernoulli Boltzmann Bridgman Carathéodory Carnot Clapeyron Clausius de Donder Duhem Gibbs von Helmholtz Joule Kelvin Lewis Massieu Maxwell von Mayer Nernst Onsager Planck Rankine Smeaton Stahl Tait Thompson van der Waals Waterston
Other Nucleation Self-assembly Self-organization Order and disorder
Category
v t e

A thermodynamic potential (or more accurately, a thermodynamic potential energy) ^{[1] [2]} is a scalar quantity used to represent the thermodynamic state of a system. Just as in mechanics, where potential energy is defined as capacity to do work, similarly different potentials have different meanings. The concept of thermodynamic potentials was introduced by Pierre Duhem in 1886. Josiah Willard Gibbs in his papers used the term fundamental functions . While thermodynamic potentials cannot be measured directly, they can be predicted using computational chemistry. ^[3]

Contents

• Description and interpretation
• Natural variables
• Fundamental equations
• Equations of state
• Measurement of thermodynamic potentials
• Maxwell relations
• Euler relations
• Gibbs–Duhem relation
• Stability conditions
• Chemical reactions
• See also
• Notes
• References
• Further reading
• External links

One main thermodynamic potential that has a physical interpretation is the internal energy U. It is the energy of configuration of a given system of conservative forces (that is why it is called potential) and only has meaning with respect to a defined set of references (or data). Expressions for all other thermodynamic energy potentials are derivable via Legendre transforms from an expression for U. In other words, each thermodynamic potential is equivalent to other thermodynamic potentials; each potential is a different expression of the others.

In thermodynamics, external forces, such as gravity, are counted as contributing to total energy rather than to thermodynamic potentials. For example, the working fluid in a steam engine sitting on top of Mount Everest has higher total energy due to gravity than it has at the bottom of the Mariana Trench, but the same thermodynamic potentials. This is because the gravitational potential energy belongs to the total energy rather than to thermodynamic potentials such as internal energy.

Description and interpretation

Five common thermodynamic potentials are: ^[4]

Name	Symbol	Formula	Natural variables
Internal energy	${\displaystyle U}$	${\displaystyle \int \left(T\,\mathrm {d} S-p\,\mathrm {d} V+\sum _{i}\mu _{i}\mathrm {d} N_{i}\right)}$	${\displaystyle S,V,\{N_{i}\}}$
Helmholtz free energy	${\displaystyle F}$	${\displaystyle U-TS}$	${\displaystyle T,V,\{N_{i}\}}$
Enthalpy	${\displaystyle H}$	${\displaystyle U+pV}$	${\displaystyle S,p,\{N_{i}\}}$
Gibbs free energy	${\displaystyle G}$	${\displaystyle U+pV-TS}$	${\displaystyle T,p,\{N_{i}\}}$
Landau potential, or grand potential	${\displaystyle \Omega }$, ${\displaystyle \Phi _{\text{G}}}$	${\displaystyle U-TS-}$${\displaystyle \sum _{i}\,}$${\displaystyle \mu _{i}N_{i}}$	${\displaystyle T,V,\{\mu _{i}\}}$

where T = temperature, S = entropy, p = pressure, V = volume. N_i is the number of particles of type i in the system and μ_i is the chemical potential for an i-type particle. The set of all N_i are also included as natural variables but may be ignored when no chemical reactions are occurring which cause them to change. The Helmholtz free energy is in ISO/IEC standard called Helmholtz energy ^[1] or Helmholtz function. It is often denoted by the symbol F, but the use of A is preferred by IUPAC, ^[5] ISO and IEC. ^[6]

These five common potentials are all potential energies, but there are also entropy potentials. The thermodynamic square can be used as a tool to recall and derive some of the potentials.

Just as in mechanics, where potential energy is defined as capacity to do work, similarly different potentials have different meanings like the below:

• Internal energy (U) is the capacity to do work plus the capacity to release heat.
• Gibbs energy ^[2] (G) is the capacity to do non-mechanical work.
• Enthalpy (H) is the capacity to do non-mechanical work plus the capacity to release heat.
• Helmholtz energy ^[1] (F) is the capacity to do mechanical work plus non-mechanical work.

From these meanings (which actually apply in specific conditions, e.g. constant pressure, temperature, etc.), for positive changes (e.g., ΔU > 0), we can say that ΔU is the energy added to the system, ΔF is the total work done on it, ΔG is the non-mechanical work done on it, and ΔH is the sum of non-mechanical work done on the system and the heat given to it.

Note that the sum of internal energy is conserved, but the sum of Gibbs energy, or Helmholtz energy, are not conserved, despite being named "energy". They can be better interpreted as the potential to perform "useful work", and the potential can be wasted. ^[7]

Thermodynamic potentials are very useful when calculating the equilibrium results of a chemical reaction, or when measuring the properties of materials in a chemical reaction. The chemical reactions usually take place under some constraints such as constant pressure and temperature, or constant entropy and volume, and when this is true, there is a corresponding thermodynamic potential that comes into play. Just as in mechanics, the system will tend towards a lower value of a potential and at equilibrium, under these constraints, the potential will take the unchanging minimum value. The thermodynamic potentials can also be used to estimate the total amount of energy available from a thermodynamic system under the appropriate constraint.

In particular: (see principle of minimum energy for a derivation) ^[8]

• When the entropy S and "external parameters" (e.g. volume) of a closed system are held constant, the internal energy U decreases and reaches a minimum value at equilibrium. This follows from the first and second laws of thermodynamics and is called the principle of minimum energy. The following three statements are directly derivable from this principle.
• When the temperature T and external parameters of a closed system are held constant, the Helmholtz free energy F decreases and reaches a minimum value at equilibrium.
• When the pressure p and external parameters of a closed system are held constant, the enthalpy H decreases and reaches a minimum value at equilibrium.
• When the temperature T, pressure p and external parameters of a closed system are held constant, the Gibbs free energy G decreases and reaches a minimum value at equilibrium.

Natural variables

For each thermodynamic potential, there are thermodynamic variables that need to be held constant to specify the potential value at a thermodynamical equilibrium state, such as independent variables for a mathematical function. These variables are termed the natural variables of that potential. ^[9] The natural variables are important not only to specify the potential value at the equilibrium, but also because if a thermodynamic potential can be determined as a function of its natural variables, all of the thermodynamic properties of the system can be found by taking partial derivatives of that potential with respect to its natural variables and this is true for no other combination of variables. If a thermodynamic potential is not given as a function of its natural variables, it will not, in general, yield all of the thermodynamic properties of the system.

The set of natural variables for each of the above four thermodynamic potentials is formed from a combination of the T, S, p, V variables, excluding any pairs of conjugate variables; there is no natural variable set for a potential including the T-S or p-V variables together as conjugate variables for energy. An exception for this rule is the N_i − μ_i conjugate pairs as there is no reason to ignore these in the thermodynamic potentials, and in fact we may additionally define the four potentials for each species. ^[10] Using IUPAC notation in which the brackets contain the natural variables (other than the main four), we have:

Thermodynamic potential name	Formula	Natural variables
Internal energy	${\displaystyle U[\mu _{j}]=U-\mu _{j}N_{j}}$	${\displaystyle S,V,\{N_{i\neq j}\},\mu _{j}}$
Helmholtz free energy	${\displaystyle F[\mu _{j}]=U-TS-\mu _{j}N_{j}}$	${\displaystyle T,V,\{N_{i\neq j}\},\mu _{j}}$
Enthalpy	${\displaystyle H[\mu _{j}]=U+pV-\mu _{j}N_{j}}$	${\displaystyle S,p,\{N_{i\neq j}\},\mu _{j}}$
Gibbs energy	${\displaystyle G[\mu _{j}]=U+pV-TS-\mu _{j}N_{j}}$	${\displaystyle T,p,\{N_{i\neq j}\},\mu _{j}}$

If there is only one species, then we are done. But, if there are, say, two species, then there will be additional potentials such as ${\displaystyle U[\mu _{1},\mu _{2}]=U-\mu _{1}N_{1}-\mu _{2}N_{2}}$ and so on. If there are D dimensions to the thermodynamic space, then there are 2^D unique thermodynamic potentials. For the most simple case, a single phase ideal gas, there will be three dimensions, yielding eight thermodynamic potentials.

Fundamental equations

The definitions of the thermodynamic potentials may be differentiated and, along with the first and second laws of thermodynamics, a set of differential equations known as the fundamental equations follow. ^[11] (Actually they are all expressions of the same fundamental thermodynamic relation, but are expressed in different variables.) By the first law of thermodynamics, any differential change in the internal energy U of a system can be written as the sum of heat flowing into the system subtracted by the work done by the system on the environment, along with any change due to the addition of new particles to the system:

${\displaystyle \mathrm {d} U=\delta Q-\delta W+\sum _{i}\mu _{i}\,\mathrm {d} N_{i}}$

where δQ is the infinitesimal heat flow into the system, and δW is the infinitesimal work done by the system, μ_i is the chemical potential of particle type i and N_i is the number of the type i particles. (Neither δQ nor δW are exact differentials, i.e., they are thermodynamic process path-dependent. Small changes in these variables are, therefore, represented with δ rather than d.)

By the second law of thermodynamics, we can express the internal energy change in terms of state functions and their differentials. In case of reversible changes we have:

${\displaystyle \delta Q=T\,\mathrm {d} S}$

${\displaystyle \delta W=p\,\mathrm {d} V}$

where

T is temperature,

S is entropy,

p is pressure,

and V is volume, and the equality holds for reversible processes.

This leads to the standard differential form of the internal energy in case of a quasistatic reversible change:

${\displaystyle \mathrm {d} U=T\mathrm {d} S-p\mathrm {d} V+\sum _{i}\mu _{i}\,\mathrm {d} N_{i}}$

Since U, S and V are thermodynamic functions of state (also called state functions), the above relation also holds for arbitrary non-reversible changes. If the system has more external variables than just the volume that can change, the fundamental thermodynamic relation generalizes to:

${\displaystyle dU=T\,\mathrm {d} S-p\,\mathrm {d} V+\sum _{j}\mu _{j}\,\mathrm {d} N_{j}+\sum _{i}X_{i}\,\mathrm {d} x_{i}}$

Here the X_i are the generalized forces corresponding to the external variables x_i. ^[12]

Applying Legendre transforms repeatedly, the following differential relations hold for the four potentials (fundamental thermodynamic equations or fundamental thermodynamic relation):

${\displaystyle \mathrm {d} U}$	${\displaystyle \!\!=}$		${\displaystyle T\mathrm {d} S}$	${\displaystyle -}$	${\displaystyle p\mathrm {d} V}$	${\displaystyle +\sum _{i}\mu _{i}\,\mathrm {d} N_{i}}$
${\displaystyle \mathrm {d} F}$	${\displaystyle \!\!=}$	${\displaystyle -}$	${\displaystyle S\,\mathrm {d} T}$	${\displaystyle -}$	${\displaystyle p\mathrm {d} V}$	${\displaystyle +\sum _{i}\mu _{i}\,\mathrm {d} N_{i}}$
${\displaystyle \mathrm {d} H}$	${\displaystyle \!\!=}$		${\displaystyle T\,\mathrm {d} S}$	${\displaystyle +}$	${\displaystyle V\mathrm {d} p}$	${\displaystyle +\sum _{i}\mu _{i}\,\mathrm {d} N_{i}}$
${\displaystyle \mathrm {d} G}$	${\displaystyle \!\!=}$	${\displaystyle -}$	${\displaystyle S\,\mathrm {d} T}$	${\displaystyle +}$	${\displaystyle V\mathrm {d} p}$	${\displaystyle +\sum _{i}\mu _{i}\,\mathrm {d} N_{i}}$

The infinitesimals on the right-hand side of each of the above equations are of the natural variables of the potential on the left-hand side. Similar equations can be developed for all of the other thermodynamic potentials of the system. There will be one fundamental equation for each thermodynamic potential, resulting in a total of 2^D fundamental equations.

The differences between the four thermodynamic potentials can be summarized as follows:

${\displaystyle \mathrm {d} (pV)=\mathrm {d} H-\mathrm {d} U=\mathrm {d} G-\mathrm {d} F}$

${\displaystyle \mathrm {d} (TS)=\mathrm {d} U-\mathrm {d} F=\mathrm {d} H-\mathrm {d} G}$

Equations of state

We can use the above equations to derive some differential definitions of some thermodynamic parameters. If we define Φ to stand for any of the thermodynamic potentials, then the above equations are of the form:

${\displaystyle \mathrm {d} \Phi =\sum _{i}x_{i}\,\mathrm {d} y_{i}}$

where x_i and y_i are conjugate pairs, and the y_i are the natural variables of the potential Φ. From the chain rule it follows that:

${\displaystyle x_{j}=\left({\frac {\partial \Phi }{\partial y_{j}}}\right)_{\{y_{i\neq j}\}}}$

where {y_i ≠ j} is the set of all natural variables of Φ except y_j that are held as constants. This yields expressions for various thermodynamic parameters in terms of the derivatives of the potentials with respect to their natural variables. These equations are known as equations of state since they specify parameters of the thermodynamic state. ^[13] If we restrict ourselves to the potentials U (Internal energy), F (Helmholtz energy), H (Enthalpy) and G (Gibbs energy), then we have the following equations of state (subscripts showing natural variables that are held as constants):

${\displaystyle +T=\left({\frac {\partial U}{\partial S}}\right)_{V,\{N_{i}\}}=\left({\frac {\partial H}{\partial S}}\right)_{p,\{N_{i}\}}}$

${\displaystyle -p=\left({\frac {\partial U}{\partial V}}\right)_{S,\{N_{i}\}}=\left({\frac {\partial F}{\partial V}}\right)_{T,\{N_{i}\}}}$

${\displaystyle +V=\left({\frac {\partial H}{\partial p}}\right)_{S,\{N_{i}\}}=\left({\frac {\partial G}{\partial p}}\right)_{T,\{N_{i}\}}}$

${\displaystyle -S=\left({\frac {\partial G}{\partial T}}\right)_{p,\{N_{i}\}}=\left({\frac {\partial F}{\partial T}}\right)_{V,\{N_{i}\}}}$

${\displaystyle ~\mu _{j}=\left({\frac {\partial \phi }{\partial N_{j}}}\right)_{X,Y,\{N_{i\neq j}\}}}$

where, in the last equation, ϕ is any of the thermodynamic potentials (U, F, H, or G), and ${\displaystyle {X,Y,\{N_{i\neq j}\}}}$ are the set of natural variables for that potential, excluding N_i. If we use all thermodynamic potentials, then we will have more equations of state such as

${\displaystyle -N_{j}=\left({\frac {\partial U[\mu _{j}]}{\partial \mu _{j}}}\right)_{S,V,\{N_{i\neq j}\}}}$

and so on. In all, if the thermodynamic space is D dimensions, then there will be D equations for each potential, resulting in a total of D 2^D equations of state because 2^D thermodynamic potentials exist. If the D equations of state for a particular potential are known, then the fundamental equation for that potential (i.e., the exact differential of the thermodynamic potential) can be determined. This means that all thermodynamic information about the system will be known because the fundamental equations for any other potential can be found via the Legendre transforms and the corresponding equations of state for each potential as partial derivatives of the potential can also be found.

Measurement of thermodynamic potentials

The above equations of state suggest methods to experimentally measure changes in the thermodynamic potentials using physically measurable parameters. For example the free energy expressions

${\displaystyle +V=\left({\frac {\partial G}{\partial p}}\right)_{T,\{N_{i}\}}}$

and

${\displaystyle -p=\left({\frac {\partial F}{\partial V}}\right)_{T,\{N_{i}\}}}$

can be integrated at constant temperature and quantities to obtain:

${\displaystyle \Delta G=\int _{P1}^{P2}V\,\mathrm {d} p\,\,\,\,}$(at constant T, {N_j} )

${\displaystyle \Delta F=-\int _{V1}^{V2}p\,\mathrm {d} V\,\,\,\,}$(at constant T, {N_j} )

which can be measured by monitoring the measurable variables of pressure, temperature and volume. Changes in the enthalpy and internal energy can be measured by calorimetry (which measures the amount of heat ΔQ released or absorbed by a system). The expressions

${\displaystyle +T=\left({\frac {\partial U}{\partial S}}\right)_{V,\{N_{i}\}}=\left({\frac {\partial H}{\partial S}}\right)_{p,\{N_{i}\}}}$

can be integrated:

${\displaystyle \Delta H=\int _{S1}^{S2}T\,\mathrm {d} S=\Delta Q\,\,\,\,}$(at constant P, {N_j} )

${\displaystyle \Delta U=\int _{S1}^{S2}T\,\mathrm {d} S=\Delta Q\,\,\,\,}$(at constant V, {N_j} )

Note that these measurements are made at constant {N_j } and are therefore not applicable to situations in which chemical reactions take place.

Maxwell relations

Again, define x_i and y_i to be conjugate pairs, and the y_i to be the natural variables of some potential Φ. We may take the "cross differentials" of the state equations, which obey the following relationship:

${\displaystyle \left({\frac {\partial }{\partial y_{j}}}\left({\frac {\partial \Phi }{\partial y_{k}}}\right)_{\{y_{i\neq k}\}}\right)_{\{y_{i\neq j}\}}=\left({\frac {\partial }{\partial y_{k}}}\left({\frac {\partial \Phi }{\partial y_{j}}}\right)_{\{y_{i\neq j}\}}\right)_{\{y_{i\neq k}\}}}$

From these we get the Maxwell relations. ^{[4] [14]} There will be ⁠(D − 1)/2⁠ of them for each potential giving a total of ⁠D(D − 1)/2⁠ equations in all. If we restrict ourselves the U, F, H, G

${\displaystyle \left({\frac {\partial T}{\partial V}}\right)_{S,\{N_{i}\}}=-\left({\frac {\partial p}{\partial S}}\right)_{V,\{N_{i}\}}}$

${\displaystyle \left({\frac {\partial T}{\partial p}}\right)_{S,\{N_{i}\}}=+\left({\frac {\partial V}{\partial S}}\right)_{p,\{N_{i}\}}}$

${\displaystyle \left({\frac {\partial S}{\partial V}}\right)_{T,\{N_{i}\}}=+\left({\frac {\partial p}{\partial T}}\right)_{V,\{N_{i}\}}}$

${\displaystyle \left({\frac {\partial S}{\partial p}}\right)_{T,\{N_{i}\}}=-\left({\frac {\partial V}{\partial T}}\right)_{p,\{N_{i}\}}}$

Using the equations of state involving the chemical potential we get equations such as:

${\displaystyle \left({\frac {\partial T}{\partial N_{j}}}\right)_{V,S,\{N_{i\neq j}\}}=\left({\frac {\partial \mu _{j}}{\partial S}}\right)_{V,\{N_{i}\}}}$

and using the other potentials we can get equations such as:

${\displaystyle \left({\frac {\partial N_{j}}{\partial V}}\right)_{S,\mu _{j},\{N_{i\neq j}\}}=-\left({\frac {\partial p}{\partial \mu _{j}}}\right)_{S,V\{N_{i\neq j}\}}}$

${\displaystyle \left({\frac {\partial N_{j}}{\partial N_{k}}}\right)_{S,V,\mu _{j},\{N_{i\neq j,k}\}}=-\left({\frac {\partial \mu _{k}}{\partial \mu _{j}}}\right)_{S,V\{N_{i\neq j}\}}}$

Euler relations

Again, define x_i and y_i to be conjugate pairs, and the y_i to be the natural variables of the internal energy. Since all of the natural variables of the internal energy U are extensive quantities

${\displaystyle U(\{\alpha y_{i}\})=\alpha U(\{y_{i}\})}$

it follows from Euler's homogeneous function theorem that the internal energy can be written as:

${\displaystyle U(\{y_{i}\})=\sum _{j}y_{j}\left({\frac {\partial U}{\partial y_{j}}}\right)_{\{y_{i\neq j}\}}}$

From the equations of state, we then have:

${\displaystyle U=TS-pV+\sum _{i}\mu _{i}N_{i}}$

This formula is known as an Euler relation, because Euler's theorem on homogeneous functions leads to it. ^{[15] [16]} (It was not discovered by Euler in an investigation of thermodynamics, which did not exist in his day.).

Substituting into the expressions for the other main potentials we have:

${\displaystyle F=-pV+\sum _{i}\mu _{i}N_{i}}$

${\displaystyle H=TS+\sum _{i}\mu _{i}N_{i}}$

${\displaystyle G=\sum _{i}\mu _{i}N_{i}}$

As in the above sections, this process can be carried out on all of the other thermodynamic potentials. Thus, there is another Euler relation, based on the expression of entropy as a function of internal energy and other extensive variables. Yet other Euler relations hold for other fundamental equations for energy or entropy, as respective functions of other state variables including some intensive state variables. ^[17]

Gibbs–Duhem relation

Deriving the Gibbs–Duhem equation from basic thermodynamic state equations is straightforward. ^{[11] [18] [19]} Equating any thermodynamic potential definition with its Euler relation expression yields:

${\displaystyle U=TS-PV+\sum _{i}\mu _{i}N_{i}}$

Differentiating, and using the second law:

${\displaystyle \mathrm {d} U=T\mathrm {d} S-P\mathrm {d} V+\sum _{i}\mu _{i}\,\mathrm {d} N_{i}}$

yields:

${\displaystyle 0=S\mathrm {d} T-V\mathrm {d} P+\sum _{i}N_{i}\mathrm {d} \mu _{i}}$

Which is the Gibbs–Duhem relation. The Gibbs–Duhem is a relationship among the intensive parameters of the system. It follows that for a simple system with I components, there will be I + 1 independent parameters, or degrees of freedom. For example, a simple system with a single component will have two degrees of freedom, and may be specified by only two parameters, such as pressure and volume for example. The law is named after Josiah Willard Gibbs and Pierre Duhem.

Stability conditions

As the internal energy is a convex function of entropy and volume, the stability condition requires that the second derivative of internal energy with entropy or volume to be positive. It is commonly expressed as ${\displaystyle d^{2}U>0}$. Since the maximum principle of entropy is equivalent to minimum principle of internal energy, the combined criteria for stability or thermodynamic equilibrium is expressed as ${\displaystyle d^{2}U>0}$ and ${\displaystyle dU=0}$ for parameters, entropy and volume. This is analogous to ${\displaystyle d^{2}S<0}$ and ${\displaystyle dS=0}$ condition for entropy at equilibrium. ^[20] The same concept can be applied to the various thermodynamic potentials by identifying if they are convex or concave of respective their variables.

${\displaystyle {\biggl (}{\partial ^{2}F \over \partial T^{2}}{\biggr )}_{V,N}\leq 0}$ and ${\displaystyle {\biggl (}{\partial ^{2}F \over \partial V^{2}}{\biggr )}_{T,N}\geq 0}$

Where Helmholtz energy is a concave function of temperature and convex function of volume.

${\displaystyle {\biggl (}{\partial ^{2}H \over \partial P^{2}}{\biggr )}_{S,N}\leq 0}$ and ${\displaystyle {\biggl (}{\partial ^{2}H \over \partial S^{2}}{\biggr )}_{P,N}\geq 0}$

Where enthalpy is a concave function of pressure and convex function of entropy.

${\displaystyle {\biggl (}{\partial ^{2}G \over \partial T^{2}}{\biggr )}_{P,N}\leq 0}$ and ${\displaystyle {\biggl (}{\partial ^{2}G \over \partial P^{2}}{\biggr )}_{T,N}\leq 0}$

Where Gibbs potential is a concave function of both pressure and temperature.

In general the thermodynamic potentials (the internal energy and its Legendre transforms), are convex functions of their extrinsic variables and concave functions of intrinsic variables. The stability conditions impose that isothermal compressibility is positive and that for non-negative temperature, ${\displaystyle C_{P}>C_{V}}$. ^[21]

Chemical reactions

Changes in these quantities are useful for assessing the degree to which a chemical reaction will proceed. The relevant quantity depends on the reaction conditions, as shown in the following table. Δ denotes the change in the potential and at equilibrium the change will be zero.

Most commonly one considers reactions at constant p and T, so the Gibbs free energy is the most useful potential in studies of chemical reactions.

See also

• Coomber's relationship

Notes

Related Research Articles

Chemical thermodynamics is the study of the interrelation of heat and work with chemical reactions or with physical changes of state within the confines of the laws of thermodynamics. Chemical thermodynamics involves not only laboratory measurements of various thermodynamic properties, but also the application of mathematical methods to the study of chemical questions and the spontaneity of processes.

In fluid mechanics, the Grashof number is a dimensionless number which approximates the ratio of the buoyancy to viscous forces acting on a fluid. It frequently arises in the study of situations involving natural convection and is analogous to the Reynolds number.

An ideal gas is a theoretical gas composed of many randomly moving point particles that are not subject to interparticle interactions. The ideal gas concept is useful because it obeys the ideal gas law, a simplified equation of state, and is amenable to analysis under statistical mechanics. The requirement of zero interaction can often be relaxed if, for example, the interaction is perfectly elastic or regarded as point-like collisions.

The stress–energy tensor, sometimes called the stress–energy–momentum tensor or the energy–momentum tensor, is a tensor physical quantity that describes the density and flux of energy and momentum in spacetime, generalizing the stress tensor of Newtonian physics. It is an attribute of matter, radiation, and non-gravitational force fields. This density and flux of energy and momentum are the sources of the gravitational field in the Einstein field equations of general relativity, just as mass density is the source of such a field in Newtonian gravity.

In thermodynamics, the chemical potential of a species is the energy that can be absorbed or released due to a change of the particle number of the given species, e.g. in a chemical reaction or phase transition. The chemical potential of a species in a mixture is defined as the rate of change of free energy of a thermodynamic system with respect to the change in the number of atoms or molecules of the species that are added to the system. Thus, it is the partial derivative of the free energy with respect to the amount of the species, all other species' concentrations in the mixture remaining constant. When both temperature and pressure are held constant, and the number of particles is expressed in moles, the chemical potential is the partial molar Gibbs free energy. At chemical equilibrium or in phase equilibrium, the total sum of the product of chemical potentials and stoichiometric coefficients is zero, as the free energy is at a minimum. In a system in diffusion equilibrium, the chemical potential of any chemical species is uniformly the same everywhere throughout the system.

In thermodynamics, the Gibbs free energy is a thermodynamic potential that can be used to calculate the maximum amount of work, other than pressure-volume work, that may be performed by a thermodynamically closed system at constant temperature and pressure. It also provides a necessary condition for processes such as chemical reactions that may occur under these conditions. The Gibbs free energy is expressed asWhere:

In thermodynamics, the Helmholtz free energy is a thermodynamic potential that measures the useful work obtainable from a closed thermodynamic system at a constant temperature (isothermal). The change in the Helmholtz energy during a process is equal to the maximum amount of work that the system can perform in a thermodynamic process in which temperature is held constant. At constant temperature, the Helmholtz free energy is minimized at equilibrium.

In the calculus of variations and classical mechanics, the Euler–Lagrange equations are a system of second-order ordinary differential equations whose solutions are stationary points of the given action functional. The equations were discovered in the 1750s by Swiss mathematician Leonhard Euler and Italian mathematician Joseph-Louis Lagrange.

In physics, a partition function describes the statistical properties of a system in thermodynamic equilibrium. Partition functions are functions of the thermodynamic state variables, such as the temperature and volume. Most of the aggregate thermodynamic variables of the system, such as the total energy, free energy, entropy, and pressure, can be expressed in terms of the partition function or its derivatives. The partition function is dimensionless.

The internal energy of a thermodynamic system is the energy of the system as a state function, measured as the quantity of energy necessary to bring the system from its standard internal state to its present internal state of interest, accounting for the gains and losses of energy due to changes in its internal state, including such quantities as magnetization. It excludes the kinetic energy of motion of the system as a whole and the potential energy of position of the system as a whole, with respect to its surroundings and external force fields. It includes the thermal energy, i.e., the constituent particles' kinetic energies of motion relative to the motion of the system as a whole. The internal energy of an isolated system cannot change, as expressed in the law of conservation of energy, a foundation of the first law of thermodynamics. The notion has been introduced to describe the systems characterized by temperature variations, temperature being added to the set of state parameters, the position variables known in mechanics, in a similar way to potential energy of the conservative fields of force, gravitational and electrostatic. Internal energy changes equal the algebraic sum of the heat transferred and the work done. In systems without temperature changes, potential energy changes equal the work done by/on the system.

A Newtonian fluid is a fluid in which the viscous stresses arising from its flow are at every point linearly correlated to the local strain rate — the rate of change of its deformation over time. Stresses are proportional to the rate of change of the fluid's velocity vector.

In thermodynamics, the Onsager reciprocal relations express the equality of certain ratios between flows and forces in thermodynamic systems out of equilibrium, but where a notion of local equilibrium exists.

An ideal solution or ideal mixture is a solution that exhibits thermodynamic properties analogous to those of a mixture of ideal gases. The enthalpy of mixing is zero as is the volume change on mixing by definition; the closer to zero the enthalpy of mixing is, the more "ideal" the behavior of the solution becomes. The vapor pressures of the solvent and solute obey Raoult's law and Henry's law, respectively, and the activity coefficient is equal to one for each component.

Maxwell's relations are a set of equations in thermodynamics which are derivable from the symmetry of second derivatives and from the definitions of the thermodynamic potentials. These relations are named for the nineteenth-century physicist James Clerk Maxwell.

In thermodynamics, the fugacity of a real gas is an effective partial pressure which replaces the mechanical partial pressure in an accurate computation of chemical equilibrium. It is equal to the pressure of an ideal gas which has the same temperature and molar Gibbs free energy as the real gas.

Thermodynamics is expressed by a mathematical framework of thermodynamic equations which relate various thermodynamic quantities and physical properties measured in a laboratory or production process. Thermodynamics is based on a fundamental set of postulates, that became the laws of thermodynamics.

The principle of minimum energy is essentially a restatement of the second law of thermodynamics. It states that for a closed system, with constant external parameters and entropy, the internal energy will decrease and approach a minimum value at equilibrium. External parameters generally means the volume, but may include other parameters which are specified externally, such as a constant magnetic field.

In thermodynamics, the fundamental thermodynamic relation are four fundamental equations which demonstrate how four important thermodynamic quantities depend on variables that can be controlled and measured experimentally. Thus, they are essentially equations of state, and using the fundamental equations, experimental data can be used to determine sought-after quantities like G or H (enthalpy). The relation is generally expressed as a microscopic change in internal energy in terms of microscopic changes in entropy, and volume for a closed system in thermal equilibrium in the following way.

In thermodynamics, the Gibbs–Duhem equation describes the relationship between changes in chemical potential for components in a thermodynamic system:

Lagrangian field theory is a formalism in classical field theory. It is the field-theoretic analogue of Lagrangian mechanics. Lagrangian mechanics is used to analyze the motion of a system of discrete particles each with a finite number of degrees of freedom. Lagrangian field theory applies to continua and fields, which have an infinite number of degrees of freedom.

References

• Alberty, R. A. (2001). "Use of Legendre transforms in chemical thermodynamics" (PDF). Pure Appl. Chem. 73 (8): 1349–1380. doi:10.1351/pac200173081349.
• Callen, Herbert B. (1985). Thermodynamics and an Introduction to Thermostatistics (2nd ed.). New York: John Wiley & Sons. ISBN   978-0-471-86256-7.
• Moran, Michael J.; Shapiro, Howard N. (1996). Fundamentals of Engineering Thermodynamics (3rd ed.). New York; Toronto: J. Wiley & Sons. ISBN   978-0-471-07681-0.

Further reading

• McGraw Hill Encyclopaedia of Physics (2nd Edition), C.B. Parker, 1994, ISBN   0-07-051400-3
• Thermodynamics, From Concepts to Applications (2nd Edition), A. Shavit, C. Gutfinger, CRC Press (Taylor and Francis Group, USA), 2009, ISBN   9781420073683
• Chemical Thermodynamics, D.J.G. Ives, University Chemistry, Macdonald Technical and Scientific, 1971, ISBN   0-356-03736-3
• Elements of Statistical Thermodynamics (2nd Edition), L.K. Nash, Principles of Chemistry, Addison-Wesley, 1974, ISBN   0-201-05229-6
• Statistical Physics (2nd Edition), F. Mandl, Manchester Physics, John Wiley & Sons, 2008, ISBN   9780471566588

External links

• Thermodynamic Potentials – Georgia State University
• Chemical Potential Energy: The 'Characteristic' vs the Concentration-Dependent Kind