Dry cask storage

Last updated
Dry cask storage area Nuclear dry storage.jpg
Dry cask storage area

Dry cask storage is a method of storing high-level radioactive waste, such as spent nuclear fuel that has already been cooled in a spent fuel pool for at least one year and often as much as ten years. [1] [2] Casks are typically steel cylinders that are either welded or bolted closed. The fuel rods inside are surrounded by inert gas. Ideally, the steel cylinder provides leak-tight containment of the spent fuel. Each cylinder is surrounded by additional steel, concrete, or other material to provide radiation shielding to workers and members of the public.

Contents

There are various dry storage cask system designs. With some designs, the steel cylinders containing the fuel are placed vertically in a concrete vault; other designs orient the cylinders horizontally. [3] The concrete vaults provide the radiation shielding. Other cask designs orient the steel cylinder vertically on a concrete pad at a dry cask storage site and use both metal and concrete outer cylinders for radiation shielding. Until 2024/25, there was no long term permanent storage facility anywhere in the world, and most countries still don't have a facility; dry cask storage is designed as an interim safer solution than spent fuel pool storage.

Some of the cask designs can be used for both storage and transportation. Three companies – Holtec International, NAC International and Areva-Transnuclear NUHOMS – are marketing Independent Spent Fuel Storage Installations (ISFSI) based upon an unshielded multi-purpose canister which is transported and stored in on-site vertical or horizontal shielded storage modules constructed of steel and concrete.

Usage

During the 2000s, dry cask storage was used in the United States, Canada, Germany, Switzerland, Spain, Belgium, the United Kingdom, Japan, Armenia, Argentina, Bulgaria, Czech Republic, Hungary, South Korea, Romania, Slovakia, Ukraine and Lithuania. [4] [5] [6]

A similar system is also being implemented in Russia. However, it is based on 'storage compartments' in a single structure, rather than individual casks.

In 2017, France's Areva introduced the NUHOMS Matrix advanced used nuclear fuel storage overpack, a high-density system for storing multiple spent fuel rods in canisters. [7]

United States

In the late 1970s and early 1980s, the need for alternative storage in the United States began to grow when cooling pools at many nuclear reactors began to fill with stored spent fuel. As there was not a national nuclear storage facility in operation at the time, utilities began looking at options for storing spent fuel. Dry cask storage was determined to be a practical option for storage of spent fuel and preferable to leaving large concentrations of spent fuel in cooling tanks. The first dry storage installation in the US was licensed by the Nuclear Regulatory Commission (NRC) in 1986 at the Surry Nuclear Power Plant in Virginia. Spent fuel is currently stored in dry cask systems at a growing number of power plant sites, and at an interim facility located at the Idaho National Laboratory near Idaho Falls, Idaho. The NRC estimated that many of the nuclear power plants in the United States will be out of room in their spent fuel pools by 2015, most likely requiring the use of temporary storage of some kind. [8] Yucca Mountain, in Nevada, was expected to open in 2017. However, on March 5, 2009, Energy Secretary Steven Chu reiterated in a Senate hearing that the Yucca Mountain site was no longer considered an option for storing reactor waste. [9]

The 2008, NRC guidelines call for fuels to have spent at least five years in a storage pool before being moved to dry casks. The industry norm is about 10 years. [2] [10] The NRC describes the dry casks used in the US as "designed to resist floods, tornadoes, projectiles, temperature extremes, and other unusual scenarios." [10]

As of the end of 2009, 13,856 metric tons of commercial spent fuel – or about 22% – were stored in dry casks. [2]

In the 1990s, the NRC had to “take repeated actions to address defective welds on dry casks that led to cracks and quality assurance problems; helium had leaked into some casks, increasing temperatures and causing accelerated fuel corrosion”. [11]

With the zeroing of the federal budget for the Yucca Mountain nuclear waste repository in Nevada, more nuclear waste is being loaded into sealed metal casks filled with inert gas. Many of these casks will be stored in coastal or lakeside regions where a salt air environment exists, and the Massachusetts Institute of Technology is studying how such dry casks perform in salt environments. Cracking related to corrosion could occur in 30 years or less, and the NRC is studying whether the casks can be used for 100 years as some hope. [12]

According to the NRC's website in 2023, spent fuel placed in dry cask storage from the Diablo Canyon power plant in California shows no sign of corrosion after more than a decade of storage and appears to be capable of lasting for 1800 years before succumbing to corrosion. [13] Company videos, covering the processes and remote handling, from the initial fuel loading to the removal and eventual dry-cask storage, are viewable on various video hosting domains. [14] [15]

Canada

In Canada, above-ground dry storage has been used. Ontario Power Generation is in the process of constructing a Dry Storage Cask storage facility [16] on its Darlington site, which will be similar in many respects to existing facilities at Pickering Nuclear Generating Station and Bruce Nuclear Generating Station. NB Power's Point Lepreau Nuclear Generating Station and Hydro-Québec's Gentilly Nuclear Generating Station also both operate dry storage facilities. [17]

Germany

Multipurpose Constor Storage, Transport, and Disposal Cask Constor.JPG
Multipurpose Constor Storage, Transport, and Disposal Cask

A centralized storage facility using dry casks is located at Ahaus. [18] As of 2011, it housed 311 casks: 305 from the Thorium High Temperature Reactor, 3 from the Neckarwestheim Nuclear Power Plant, and 3 from the Gundremmingen Nuclear Power Plant. [18] The transport from Gundremmingen to the Ahaus site met with considerable public protest and the power plant operators and the government later agreed to locate such casks at the powerplants. [18]

CASTOR (cask for storage and transport of radioactive material) is a trademarked brand of dry casks used to store spent nuclear fuel (a type of nuclear waste). CASTORs are manufactured by Gesellschaft für Nuklear-Service (GNS), a German provider of nuclear services.

CONSTOR is a cask used for transport and long-term storage of spent fuel and high-level waste also manufactured by GNS. Its inner and outer layers are steel, enclosing a layer of concrete. A 9-meter drop test of the V/TC model was conducted in 2004; the results conformed to expectations. [19]

Bulgaria

In 2008, officials at the Kozloduy Nuclear Power Plant announced their intention to use 34 CONSTOR casks at the Kozloduy NPP site before the end of 2010. [20]

Lithuania

Spent fuel from the now-closed Ignalina Nuclear Power Plant was placed in CASTOR and CONSTOR storage casks during the 2000s. [6]

Russia

The Russian dry storage facility for spent nuclear fuel, the HOT-2 at Mining Chemical Combine in Zheleznogorsk, Krasnoyarsk Krai in Siberia, is not a 'cask' facility per se, as it is designed to accommodate the spent nuclear fuel (both VVER and RBMK) in a series of compartments. The structure of the facility is made up of monolithic reinforced concrete walls and top and bottom slabs, with the actual storage compartments formed by reinforced concrete partitions. The fuel is to be cooled by natural convection of air. The design capacity of the facility is 37,785 tonnes of uranium. It is now under construction and in the process of commissioning. [21]

Ukraine

In Ukraine, a dry storage facility has been accepting spent fuel from the six-unit Zaporizhzhia Nuclear Power Plant (VVER-1000 reactors) since 2001, making it the longest-serving such facility in the former Soviet Union. The system was designed by the now-defunct Duke Engineering of the United States, with the storage casks being manufactured locally. [22]

Another project is underway with Holtec International (of the USA) to build a dry spent fuel storage facility at the 1986 accident Chernobyl Nuclear Power Plant (RBMK-1000 reactors). The project was initially started with Framatome (currently AREVA) of France, later suspended and terminated due to technical difficulties. Holtec was originally hired as a subcontractor to dehydrate the spent fuel, eventually taking over the entire project. [23] [24]

See also

Related Research Articles

<span class="mw-page-title-main">Yucca Mountain nuclear waste repository</span> Unused deep geological repository facility in Nevada, US

The Yucca Mountain Nuclear Waste Repository, as designated by the Nuclear Waste Policy Act amendments of 1987, is a proposed deep geological repository storage facility within Yucca Mountain for spent nuclear fuel and other high-level radioactive waste in the United States. The site is on federal land adjacent to the Nevada Test Site in Nye County, Nevada, about 80 mi (130 km) northwest of the Las Vegas Valley.

<span class="mw-page-title-main">Chernobyl Nuclear Power Plant</span> Decommissioned nuclear power plant in Ukraine

The Chernobyl Nuclear Power Plant (ChNPP) is a nuclear power plant undergoing decommissioning. ChNPP is located near the abandoned city of Pripyat in northern Ukraine, 16.5 kilometers (10 mi) northwest of the city of Chernobyl, 16 kilometers (10 mi) from the Belarus–Ukraine border, and about 100 kilometers (62 mi) north of Kyiv. The plant was cooled by an engineered pond, fed by the Pripyat River about 5 kilometers (3 mi) northwest from its juncture with the Dnieper river.

<span class="mw-page-title-main">Ignalina Nuclear Power Plant</span> Decommissioned nuclear power plant in Visaginas Municipality, Lithuania

The Ignalina Nuclear Power Plant is a decommissioned two-unit RBMK-1500 nuclear power station in Visaginas Municipality, Lithuania. It was named after the nearby city of Ignalina. Due to the plant's similarities to the infamous Chernobyl Nuclear Power Plant in both reactor design and lack of a robust containment building, Lithuania agreed to close the plant as part of its agreement of accession to the European Union. Unit 1 was closed in December 2004; Unit 2 in December 2009. The plant accounted for 25% of Lithuania's electricity generating capacity and supplied about 70% of Lithuania's electrical demand, was closed on December 31, 2009. Proposals have been made to construct a new nuclear power plant at the site, but such plans have yet to come to fruition.

<span class="mw-page-title-main">Indian Point Energy Center</span> Nuclear power plant in Buchanan, New York

Indian Point Energy Center (I.P.E.C.) is a now defunct three-unit nuclear power station located in Buchanan, just south of Peekskill, in Westchester County, New York. It sits on the east bank of the Hudson River, about 36 miles (58 km) north of Midtown Manhattan. The facility permanently ceased power operations on April 30, 2021. Before its closure, the station's two operating reactors generated about 2,000 megawatts (MWe) of electrical power, about 25% of New York City's usage. The station is owned by Holtec International, and consists of three permanently deactivated reactors, Indian Point Units 1, 2, and 3. Units 2 and 3 were Westinghouse pressurized water reactors. Entergy purchased Unit 3 from the New York Power Authority in 2000 and Units 1 and 2 from Consolidated Edison in 2001.

<span class="mw-page-title-main">San Onofre Nuclear Generating Station</span> Permanently closed nuclear power plant located south of San Clemente, California

The San Onofre Nuclear Generating Station (SONGS) is a permanently closed nuclear power plant located south of San Clemente, California, on the Pacific coast, in Nuclear Regulatory Commission Region IV. The plant was shut down in 2013 after defects were found in replacement steam generators; it is currently in the process of decommissioning. The 2.2 GW of electricity supply lost when the plant shut down was replaced with 1.8 GW of new natural-gas fired power plants and 250 MW of energy storage projects.

<span class="mw-page-title-main">Prairie Island Nuclear Power Plant</span> Nuclear power plant located in Red Wing, Minnesota

The Prairie Island Nuclear Generating Plant is an electricity-generating facility located in Red Wing, Minnesota, along the Mississippi River, and adjacent to the Prairie Island Indian Community reservation.

<span class="mw-page-title-main">Zion Nuclear Power Station</span> Decommissioned nuclear power plant in Lake County, Illinois

Zion Nuclear Power Station was the third dual-reactor nuclear power plant in the Commonwealth Edison (ComEd) network and served Chicago and the northern quarter of Illinois. The plant was built in 1973, and the first unit started producing power in December 1973. The second unit came online in September 1974. This power generating station is located on 257 acres (104 ha) of Lake Michigan shoreline, in the city of Zion, Lake County, Illinois. It is approximately 40 direct-line miles north of Chicago, Illinois and 42 miles (68 km) south of Milwaukee, Wisconsin.

<span class="mw-page-title-main">Palisades Nuclear Generating Station</span> Nuclear power plant in Van Buren County, Michigan

The Palisades Nuclear Generating Station is a moth-balled nuclear power plant located on Lake Michigan, in Van Buren County's Covert Township, Michigan, on a 432-acre (175 ha) site 5 miles (8.0 km) south of South Haven, Michigan, USA. Palisades was operated by the Nuclear Management Company and owned by CMS Energy prior to the sale to Entergy on April 11, 2007.

<span class="mw-page-title-main">Containment building</span> Structure surrounding a nuclear reactor to prevent radioactive releases

A containment building is a reinforced steel, concrete or lead structure enclosing a nuclear reactor. It is designed, in any emergency, to contain the escape of radioactive steam or gas to a maximum pressure in the range of 275 to 550 kPa. The containment is the fourth and final barrier to radioactive release, the first being the fuel ceramic itself, the second being the metal fuel cladding tubes, the third being the reactor vessel and coolant system.

<span class="mw-page-title-main">Kozloduy Nuclear Power Plant</span> Nuclear power plant in Bulgaria

The Kozloduy Nuclear Power Plant is a nuclear power plant in Bulgaria situated 180 kilometres (110 mi) north of Sofia and 5 kilometres (3.1 mi) east of Kozloduy, a town on the Danube river, near the border with Romania. It is the country's only nuclear power plant and the largest in the region. The construction of the first reactor began on 6 April 1970.

<span class="mw-page-title-main">Spent fuel pool</span> Storage pools for spent nuclear fuel

Spent fuel pools (SFP) are storage pools for spent fuel from nuclear reactors. They are typically 40 or more feet (12 m) deep, with the bottom 14 feet equipped with storage racks designed to hold fuel assemblies removed from reactors. A reactor's local pool is specially designed for the reactor in which the fuel was used and is situated at the reactor site. Such pools are used for short-term cooling of the fuel rods. This allows short-lived isotopes to decay and thus reduces the ionizing radiation and decay heat emanating from the rods. The water cools the fuel and provides radiological protection from its radiation.

<span class="mw-page-title-main">Spent nuclear fuel</span> Nuclear fuel thats been irradiated in a nuclear reactor

Spent nuclear fuel, occasionally called used nuclear fuel, is nuclear fuel that has been irradiated in a nuclear reactor. It is no longer useful in sustaining a nuclear reaction in an ordinary thermal reactor and, depending on its point along the nuclear fuel cycle, it will have different isotopic constituents than when it started.

<span class="mw-page-title-main">Yankee Rowe Nuclear Power Station</span> Decommissioned nuclear power plant in Massachusetts

Yankee Rowe Nuclear Power Station was a nuclear power plant in Rowe, Massachusetts, located on the Deerfield River in the town of Rowe in western Massachusetts. Its 180 MWe pressurized water reactor operated from 1961 to 1991. It produced electricity for New England consumers. The site is referred to as "Yankee-Rowe" or simply "Rowe", to avoid confusion with Vermont Yankee, another nuclear power station located in nearby Vernon, Vermont. The decommissioning of the site was completed in 2007.

Nuclear decommissioning is the process leading to the irreversible complete or partial closure of a nuclear facility, usually a nuclear reactor, with the ultimate aim at termination of the operating licence. The process usually runs according to a decommissioning plan, including the whole or partial dismantling and decontamination of the facility, ideally resulting in restoration of the environment up to greenfield status. The decommissioning plan is fulfilled when the approved end state of the facility has been reached.

<span class="mw-page-title-main">Gorleben</span> Municipality in Lower Saxony, Germany

Gorleben is a small municipality (Gemeinde) in the Gartow region of the Lüchow-Dannenberg district in the far north-east of Lower Saxony, Germany, a region also known as the Wendland.

<span class="mw-page-title-main">La Crosse Boiling Water Reactor</span> Decommissioned nuclear power plant near La Crosse, Wisconsin, USA

La Crosse Boiling Water Reactor (LACBWR) was a boiling water reactor (BWR) nuclear power plant located near La Crosse, Wisconsin in the small village of Genoa, in Vernon County, approximately 17 miles south of La Crosse along the Mississippi River. It was located directly adjacent to the coal-fired Genoa Station #3. The site is owned and was operated by Dairyland Power Cooperative (Dairyland). Although the reactor has been demolished and decommissioned, spent nuclear fuel is still stored at the location.

<span class="mw-page-title-main">Humboldt Bay Nuclear Power Plant</span> Decommissioned nuclear power plant in California

The Humboldt Bay Power Plant, Unit 3 was a 63 MWe nuclear boiling water reactor, owned by Pacific Gas and Electric Company that operated from August 1963 to July 1976 just south of Eureka, California, in an area referred to as King Salmon and Fields Landing.

Nuclear entombment is a method of nuclear decommissioning in which radioactive contaminants are encased in a structurally long-lived material, such as concrete. This prevents radioactive material and other contaminated substances from being exposed to human activity and the environment. Entombment is usually applied to nuclear reactors, but also some nuclear test sites. Nuclear entombment is the least used of three methods for decommissioning nuclear power plants, the others being dismantling and deferred dismantling. The use of nuclear entombment is more practical for larger nuclear power plants that are in need of both long and short term burials, as well as for power plants which seek to terminate their facility licenses. Entombment is used on a case-by-case basis because of its major commitment with years of surveillance and complexity until the radioactivity is no longer a major concern, permitting decommissioning and ultimate unrestricted release of the property. Considerations such as financial backing and the availability of technical know-how are also major factors.

The EGP-6 is a Russian small nuclear reactor design. It is a scaled down version of the RBMK design. As the RBMK, the EGP-6 uses water for cooling and graphite as a neutron moderator. EGP is a Russian acronym but translated into English it stands for Power Heterogenous Loop reactor. It is the world's smallest running commercial nuclear reactor, however smaller reactors are currently in development. The EGP-6 reactors are the only reactors to be built on permafrost.

<span class="mw-page-title-main">Holtec International</span> Supplier of equipment and systems for the energy industry

Holtec International is a supplier of equipment and systems for the energy industry. Founded in Mount Laurel, New Jersey in 1986, Holtec International is a privately-held technology company with domestic operation centers in New Jersey, Florida, Ohio and Pennsylvania and worldwide in Brazil, India Japan, Mexico, Poland, South Africa, Spain, U.K. and Ukraine. It specializes in the design and manufacture of parts for nuclear reactors. The company sells equipment to manage spent nuclear fuel from nuclear reactors.

References

  1. "Dry Cask Storage". Nuclear Regulatory Commission . Retrieved 2011-03-17. Dry cask storage allows spent fuel that has already been cooled in the spent fuel pool for at least one year to be surrounded by inert gas inside a container called a cask,
  2. 1 2 3 "Spent Fuel Storage in Pools and Dry Casks: Key Points and Questions & Answers". Nuclear Regulatory Commission . Retrieved 2013-11-27. Fuel is typically cooled at least 5 years in the pool before transfer to cask. NRC has authorized transfer as early as 3 years; the industry norm is about 10 years.
  3. Nuclear Regulatory Commission, Dry Cask Storage, Figure 43.
  4. Agency, IAEA – International Atomic Energy. "Nuclear Fuel Cycle Facilities (NFCIS)". infcis.iaea.org. Retrieved 18 April 2018.
  5. OECD Nuclear Energy Agency (May 2007). Management of recyclable fissile and fertile materials. OECD Publishing. p. 34. ISBN   978-92-64-03255-2 . Retrieved 22 March 2011.
  6. 1 2 "Radiological and thermal characteristics of CASTOR RBMK-1500 and CONSTOR RBMK-1500 casks for spent nuclear fuel storage at ignalina Nuclear Power Plant". Hanser, cited through CAT.INIST. 2006. Archived from the original on 2012-08-17. Retrieved 2010-01-01.
  7. "Areva's space-saving solution for used fuel storage". World Nuclear News. 29 September 2017. Retrieved 29 September 2017.
  8. "NRC Graph of Spent Fuel Capacity". nrc.gov. Retrieved 18 April 2018.
  9. Hebert, H. Josef. 2009. “Nuclear waste won't be going to Nevada's Yucca Mountain, Obama official says Archived 2011-03-24 at the Wayback Machine .” Chicago Tribune. March 6, 2009, 4. Accessed 2009-03-06.
  10. 1 2 "Fact Sheet on Dry Cask Storage of Spent Nuclear Fuel". NRC. May 7, 2009. Retrieved 2011-03-21.
  11. Benjamin K. Sovacool (2011). Contesting the Future of Nuclear Power: A Critical Global Assessment of Atomic Energy, World Scientific, p. 144.
  12. Wald, Matthew (August 9, 2011). "Researching Safer Nuclear Energy". New York Times.
  13. "Spent Fuel Storage in Pools and Dry Casks Key Points and Questions & Answers".
  14. Dry Fuel Storage (Yankee Rowe).
  15. Spent Fuel Storage at Diablo Canyon Power Plant.
  16. "Archived copy" (PDF). Archived from the original (PDF) on 2007-10-13. Retrieved 2008-04-12.{{cite web}}: CS1 maint: archived copy as title (link) Ontario Power Generation; Darlington Waste Management Facility.
  17. "How Is It Stored Today?". nwmo.ca. Retrieved 2020-05-12.
  18. 1 2 3 Safety and Security of Commercial Spent Nuclear Fuel Storage: Public Report (2006) Board on Radioactive Waste Management (BRWM). National Academies Press. 2006. doi:10.17226/11263. ISBN   978-0-309-09647-8 . Retrieved 2011-03-21.
  19. "Drop Test Results of the Full Scale CONSTOR V/TC Prototype" (PDF). Bundesanstalt für Materialforschung und -prüfung. Archived from the original (PDF) on 2012-03-26. Retrieved 2010-01-10.
  20. "The English Language Bulletin of Kozloduy Nuclear Power Plant" (PDF). Kozloduy Nuclear Power Plant Official Bulletin. 2008. Archived from the original (PDF) on 2013-05-24. Retrieved 2010-10-09.
  21. "На ГХК успешно завершен второй этап пусконаладки оборудования на ХОТ-2". sibghk.ru (in Russian). Russia. Archived from the original on 2014-03-02. Retrieved 2013-03-30.
  22. "News release August 2001". Duke Energy. Archived from the original on 13 May 2013. Retrieved 18 April 2018.
  23. "Holtec International Launches the Chernobyl Dry Storage Project". businesswire.com. Retrieved 18 April 2018.
  24. "Energoatom tests Holtec used fuel casks at Rovno plant". World Nuclear News. 12 August 2019. Retrieved 13 August 2019.