Backward-wave oscillator

This article includes a list of general references, but it lacks sufficient corresponding inline citations . Please help to improve this article by introducing more precise citations.(July 2011) ( Learn how and when to remove this message )

A backward wave oscillator (BWO), also called carcinotron or backward wave tube, is a vacuum tube that is used to generate microwaves up to the terahertz range. Belonging to the traveling-wave tube family, it is an oscillator with a wide electronic tuning range.

Contents

• Basic concept
• BWO
• Carcinotron
• The slow-wave structure
• M-type BWO
• O-type BWO
• O-BWO spectral purity and noise
• Notes
• References
• External links

An electron gun generates an electron beam that interacts with a slow-wave structure. It sustains the oscillations by propagating a traveling wave backwards against the beam. The generated electromagnetic wave power has its group velocity directed oppositely to the direction of motion of the electrons. The output power is coupled out near the electron gun.

It has two main subtypes, the M-type (M-BWO), the most powerful, and the O-type (O-BWO). The output power of the O-type is typically in the range of 1 mW at 1000 GHz to 50 mW at 200 GHz. Carcinotrons are used as powerful and stable microwave sources. Due to the good quality wavefront they produce (see below), they find use as illuminators in terahertz imaging.

The backward wave oscillators were demonstrated in 1951, M-type by Bernard Epsztein ^[1] and O-type by Rudolf Kompfner. The M-type BWO is a voltage-controlled non-resonant extrapolation of magnetron interaction. Both types are tunable over a wide range of frequencies by varying the accelerating voltage. They can be swept through the band fast enough to be appearing to radiate over all the band at once, which makes them suitable for effective radar jamming, quickly tuning into the radar frequency. Carcinotrons allowed airborne radar jammers to be highly effective. However, frequency-agile radars can hop frequencies fast enough to force the jammer to use barrage jamming, diluting its output power over a wide band and significantly impairing its efficiency.

Carcinotrons are used in research, civilian and military applications. For example, the Czechoslovak Kopac passive sensor and Ramona passive sensor air defense detection systems employed carcinotrons in their receiver systems.

Basic concept

All travelling-wave tubes operate in the same general fashion, and differ primarily in details of their construction. The concept is dependent on a steady stream of electrons from an electron gun that travel down the center of the tube (see adjacent concept diagram). Surrounding the electron beam is some sort of radio frequency source signal; in the case of the traditional klystron this is a resonant cavity fed with an external signal, whereas in more modern devices there are a series of these cavities or a helical metal wire fed with the same signal. ^[2]

As the electrons travel down the tube, they interact with the RF signal. The electrons are attracted to areas with maximum positive bias and repelled from negative areas. This causes the electrons to bunch up as they are repelled or attracted along the length of the tube, a process known as velocity modulation. This process makes the electron beam take on the same general structure as the original signal; the density of the electrons in the beam matches the relative amplitude of the RF signal in the induction system. The electron current is a function of the details of the gun, and is generally orders of magnitude more powerful than the input RF signal. The result is a signal in the electron beam that is an amplified version of the original RF signal. ^[2]

As the electrons are moving, they induce a magnetic field in any nearby conductor. This allows the now-amplified signal to be extracted. In systems like the magnetron or klystron, this is accomplished with another resonant cavity. In the helical designs, this process occurs along the entire length of the tube, reinforcing the original signal in the helical conductor. The "problem" with traditional designs is that they have relatively narrow bandwidths; designs based on resonators will work with signals within 10% or 20% of their design, as this is physically built into the resonator design, while the helix designs have a much wider bandwidth, perhaps 100% on either side of the design peak. ^[3]

BWO

The BWO is built in a fashion similar to the helical TWT. However, instead of the RF signal propagating in the same (or similar) direction as the electron beam, the original signal travels at right angles to the beam. This is normally accomplished by drilling a hole through a rectangular waveguide and shooting the beam through the hole. The waveguide then goes through two right angle turns, forming a C-shape and crossing the beam again. This basic pattern is repeated along the length of the tube so the waveguide passes across the beam several times, forming a series of S-shapes. ^[2]

The original RF signal enters from what would be the far end of the TWT, where the energy would be extracted. The effect of the signal on the passing beam causes the same velocity modulation effect, but because of the direction of the RF signal and specifics of the waveguide, this modulation travels backward along the beam, instead of forward. This propagation, the slow-wave, reaches the next hole in the folded waveguide just as the same phase of the RF signal does. This causes amplification just like the traditional TWT. ^[2]

In a traditional TWT, the speed of propagation of the signal in the induction system has to be similar to that of the electrons in the beam. This is required so that the phase of the signal lines up with the bunched electrons as they pass the inductors. This places limits on the selection of wavelengths the device can amplify, based on the physical construction of the wires or resonant chambers. ^[2]

This is not the case in the BWO, where the electrons pass the signal at right angles and their speed of propagation is independent of that of the input signal. The complex serpentine waveguide places strict limits on the bandwidth of the input signal, such that a standing wave is formed within the guide. But the velocity of the electrons is limited only by the allowable voltages applied to the electron gun, which can be easily and rapidly changed. Thus the BWO takes a single input frequency and produces a wide range of output frequencies. ^[2]

Carcinotron

The device was originally given the name "carcinotron", after the Greek name for the crayfish, which swim backwards. ^[4] By simply changing the supply voltage, the device could produce any required frequency across a band that was much larger than any existing microwave amplifier could match - the cavity magnetron worked at a single frequency defined by the physical dimensions of their resonators, and while the klystron amplified an external signal, it only did so efficiently within a small range of frequencies. ^[2]

Previously, jamming a radar was a complex and time-consuming operation. Operators had to listen for potential frequencies being used, set up one of a bank of amplifiers on that frequency, and then begin broadcasting. When the radar station realized what was happening, they would change their frequencies and the process would begin again. In contrast, the carcinotron could sweep through all the possible frequencies so rapidly that it appeared to be a constant signal on all of the frequencies at once. Typical designs could generate hundreds or low thousands of watts, so at any one frequency, there might be a few watts of power that is received by the radar station. However, at long range the amount of energy from the original radar broadcast that reaches the aircraft is only a few watts at most, so the carcinotron can overpower them. ^[2]

The system was so powerful that it was found that a carcinotron operating on an aircraft would begin to be effective even before it rose above the radar horizon. As it swept through the frequencies it would broadcast on the radar's operating frequency at what were effectively random times, filling the display with random dots any time the antenna was pointed near it, perhaps 3 degrees on either side of the target. There were so many dots that the display simply filled with white noise in that area. As it approached the station, the signal would also begin to appear in the antenna's sidelobes, creating further areas that were blanked out by noise. At close range, on the order of 100 miles (160 km), the entire radar display would be completely filled with noise, rendering it useless. ^[2]

The concept was so powerful as a jammer that there were serious concerns that ground-based radars were obsolete. Airborne radars had the advantage that they could approach the aircraft carrying the jammer, and, eventually, the huge output from their transmitter would "burn through" the jamming. However, interceptors of the era relied on ground direction to get into range, using ground-based radars. This represented an enormous threat to air defense operations. ^[5]

For ground radars, the threat was eventually solved in two ways. The first was that radars were upgraded to operate on many different frequencies and switch among them randomly from pulse to pulse, a concept now known as frequency agility. Some of these frequencies were never used in peacetime, and highly secret, with the hope that they would not be known to the jammer in wartime. The carcinotron could still sweep through the entire band, but then it would be broadcasting on the same frequency as the radar only at random times, reducing its effectiveness. The other solution was to add passive receivers that triangulated on the carcinotron broadcasts, allowing the ground stations to produce accurate tracking information on the location of the jammer and allowing them to be attacked. ^[5]

The slow-wave structure

The needed slow-wave structures must support a radio frequency (RF) electric field with a longitudinal component; the structures are periodic in the direction of the beam and behave like microwave filters with passbands and stopbands. Due to the periodicity of the geometry, the fields are identical from cell to cell except for a constant phase shift Φ. This phase shift, a purely real number in a passband of a lossless structure, varies with frequency. According to Floquet's theorem (see Floquet theory), the RF electric field E(z,t) can be described at an angular frequency ω, by a sum of an infinity of "spatial or space harmonics" E_n

${\displaystyle E(z,t)=\sum _{n=-\infty }^{+\infty }{E_{n}}e^{j({\omega }t-{k_{n}}z)}}$

where the wave number or propagation constant k_n of each harmonic is expressed as

k_n = (Φ + 2nπ) / p (-π < Φ < +π)

z being the direction of propagation, p the pitch of the circuit and n an integer.

Two examples of slow-wave circuit characteristics are shown, in the ω-k or Brillouin diagram:

• on figure (a), the fundamental n=0 is a forward space harmonic (the phase velocity v_n=ω/k_n has the same sign as the group velocity v_g=dω/dk_n), synchronism condition for backward interaction is at point B, intersection of the line of slope v_e - the beam velocity - with the first backward (n = -1) space harmonic,
• on figure (b) the fundamental (n=0) is backward

A periodic structure can support both forward and backward space harmonics, which are not modes of the field, and cannot exist independently, even if a beam can be coupled to only one of them.

As the magnitude of the space harmonics decreases rapidly when the value of n is large, the interaction can be significant only with the fundamental or the first space harmonic.

M-type BWO

The M-type carcinotron, or M-type backward wave oscillator, uses crossed static electric field E and magnetic field B, similar to the magnetron, for focussing an electron sheet beam drifting perpendicularly to E and B, along a slow-wave circuit, with a velocity E/B. Strong interaction occurs when the phase velocity of one space harmonic of the wave is equal to the electron velocity. Both E_z and E_y components of the RF field are involved in the interaction (E_y parallel to the static E field). Electrons which are in a decelerating E_z electric field of the slow-wave, lose the potential energy they have in the static electric field E and reach the circuit. The sole electrode is more negative than the cathode, in order to avoid collecting those electrons having gained energy while interacting with the slow-wave space harmonic.

O-type BWO

The O-type carcinotron, or O-type backward wave oscillator, uses an electron beam longitudinally focused by a magnetic field, and a slow-wave circuit interacting with the beam. A collector collects the beam at the end of the tube.

Notes

Related Research Articles

An electronic oscillator is an electronic circuit that produces a periodic, oscillating or alternating current (AC) signal, usually a sine wave, square wave or a triangle wave, powered by a direct current (DC) source. Oscillators are found in many electronic devices, such as radio receivers, television sets, radio and television broadcast transmitters, computers, computer peripherals, cellphones, radar, and many other devices.

Microwave is a form of electromagnetic radiation with wavelengths shorter than other radio waves but longer than infrared waves. Its wavelength ranges from about one meter to one millimeter, corresponding to frequencies between 300 MHz and 300 GHz, broadly construed. A more common definition in radio-frequency engineering is the range between 1 and 100 GHz, or between 1 and 3000 GHz . The prefix micro- in microwave is not meant to suggest a wavelength in the micrometer range; rather, it indicates that microwaves are small, compared to the radio waves used in prior radio technology.

The cavity magnetron is a high-power vacuum tube used in early radar systems and subsequently in microwave ovens and in linear particle accelerators. A cavity magnetron generates microwaves using the interaction of a stream of electrons with a magnetic field, while moving past a series of cavity resonators, which are small, open cavities in a metal block. Electrons pass by the cavities and cause microwaves to oscillate within, similar to the functioning of a whistle producing a tone when excited by an air stream blown past its opening. The resonant frequency of the arrangement is determined by the cavities' physical dimensions. Unlike other vacuum tubes, such as a klystron or a traveling-wave tube (TWT), the magnetron cannot function as an amplifier for increasing the intensity of an applied microwave signal; the magnetron serves solely as an electronic oscillator generating a microwave signal from direct current electricity supplied to the vacuum tube.

Radar is a system that uses radio waves to determine the distance (ranging), direction, and radial velocity of objects relative to the site. It is a radiodetermination method used to detect and track aircraft, ships, spacecraft, guided missiles, motor vehicles, map weather formations, and terrain.

In electronics and telecommunications, a radio transmitter or just transmitter is an electronic device which produces radio waves with an antenna with the purpose of signal transmission up to a radio receiver. The transmitter itself generates a radio frequency alternating current, which is applied to the antenna. When excited by this alternating current, the antenna radiates radio waves.

A klystron is a specialized linear-beam vacuum tube, invented in 1937 by American electrical engineers Russell and Sigurd Varian, which is used as an amplifier for high radio frequencies, from UHF up into the microwave range. Low-power klystrons are used as oscillators in terrestrial microwave relay communications links, while high-power klystrons are used as output tubes in UHF television transmitters, satellite communication, radar transmitters, and to generate the drive power for modern particle accelerators.

A linear particle accelerator is a type of particle accelerator that accelerates charged subatomic particles or ions to a high speed by subjecting them to a series of oscillating electric potentials along a linear beamline. The principles for such machines were proposed by Gustav Ising in 1924, while the first machine that worked was constructed by Rolf Widerøe in 1928 at the RWTH Aachen University. Linacs have many applications: they generate X-rays and high energy electrons for medicinal purposes in radiation therapy, serve as particle injectors for higher-energy accelerators, and are used directly to achieve the highest kinetic energy for light particles for particle physics.

This is an index of articles relating to electronics and electricity or natural electricity and things that run on electricity and things that use or conduct electricity.

A traveling-wave tube or traveling-wave tube amplifier is a specialized vacuum tube that is used in electronics to amplify radio frequency (RF) signals in the microwave range. It was invented by Andrei Haeff around 1933 as a graduate student at Caltech, and its present form was invented by Rudolf Kompfner in 1942–43. The TWT belongs to a category of "linear beam" tubes, such as the klystron, in which the radio wave is amplified by absorbing power from a beam of electrons as it passes down the tube. Although there are various types of TWT, two major categories are:

A resonator is a device or system that exhibits resonance or resonant behavior. That is, it naturally oscillates with greater amplitude at some frequencies, called resonant frequencies, than at other frequencies. The oscillations in a resonator can be either electromagnetic or mechanical. Resonators are used to either generate waves of specific frequencies or to select specific frequencies from a signal. Musical instruments use acoustic resonators that produce sound waves of specific tones. Another example is quartz crystals used in electronic devices such as radio transmitters and quartz watches to produce oscillations of very precise frequency.

A gyrotron is a class of high-power linear-beam vacuum tubes that generates millimeter-wave electromagnetic waves by the cyclotron resonance of electrons in a strong magnetic field. Output frequencies range from about 20 to 527 GHz, covering wavelengths from microwave to the edge of the terahertz gap. Typical output powers range from tens of kilowatts to 1–2 megawatts. Gyrotrons can be designed for pulsed or continuous operation. The gyrotron was invented by Soviet scientists at NIRFI, based in Nizhny Novgorod, Russia.

A crossed-field amplifier (CFA) is a specialized vacuum tube, first introduced in the mid-1950s and frequently used as a microwave amplifier in very-high-power transmitters.

In radio-frequency engineering and communications engineering, waveguide is a hollow metal pipe used to carry radio waves. This type of waveguide is used as a transmission line mostly at microwave frequencies, for such purposes as connecting microwave transmitters and receivers to their antennas, in equipment such as microwave ovens, radar sets, satellite communications, and microwave radio links.

The inductive output tube (IOT) or klystrode is a variety of linear-beam vacuum tube, similar to a klystron, used as a power amplifier for high frequency radio waves. It evolved in the 1980s to meet increasing efficiency requirements for high-power RF amplifiers in radio transmitters. The primary commercial use of IOTs is in UHF television transmitters, where they have mostly replaced klystrons because of their higher efficiencies and smaller size. IOTs are also used in particle accelerators. They are capable of producing power output up to about 30 kW continuous and 7 MW pulsed and gains of 20–23 dB at frequencies up to about a gigahertz.

The Barkhausen–Kurz tube, also called the retarding-field tube, reflex triode, B–K oscillator, and Barkhausen oscillator was a high frequency vacuum tube electronic oscillator invented in 1920 by German physicists Heinrich Georg Barkhausen and Karl Kurz. It was the first oscillator that could produce radio power in the ultra-high frequency (UHF) portion of the radio spectrum, above 300 MHz. It was also the first oscillator to exploit electron transit time effects. It was used as a source of high frequency radio waves in research laboratories, and in a few UHF radio transmitters through World War 2. Its output power was low which limited its applications. However it inspired research that led to other more successful transit time tubes such as the klystron, which made the low power Barkhausen-Kurz tube obsolete.

Blue Joker was an experimental moored balloon-mounted, airborne early-warning radar project developed by the Royal Radar Establishment (RRE) starting in 1953. The idea was to position the radar high in the air in order to extend its radar horizon and allow it to see low-flying aircraft. Ground reflections were filtered out using a moving target indicator (MTI) system. Two examples were built and tested in the late 1950s, but the project was cancelled in 1960 as part of the Linesman/Mediator efforts.

Sutton tube was the name given to the first reflex klystron, developed in 1940 by Robert W. Sutton of Signal School group at the Bristol University. The Sutton tube was developed as a local oscillator for the receiver of 10cm microwave radar sets. Due to its geometry and long drift space, it suffered from mode jumping through the tuning range. For this reason, from late 1941 onward, it was replaced in many sets by the Western Electric 707A.

The extended interaction oscillator (EIO) is a linear-beam vacuum tube designed to convert direct current to RF power. The conversion mechanism is the space charge wave process whereby velocity modulation in an electron beam transforms to current or density modulation with distance.

The AMES Type 85, also known by its rainbow code Blue Yeoman, was an extremely powerful early warning (EW) and fighter direction (GCI) radar used by the Royal Air Force (RAF) as part of the Linesman/Mediator radar network. First proposed in early 1958, it was eleven years before they became operational in late 1968, by which time they were already considered obsolete. The Type 85 remained the RAF's primary air defense radar until it was replaced by Marconi Martello sets in the late-1980s as part of the new IUKADGE network.

A twystron is a type of microwave-producing vacuum tube most commonly found in high-power radar systems. The name refers to its construction, which combines a traveling wave tube, or TWT, with a klystron, producing a tw-ystron. The name was originally a trademark of Varian Associates, its developer, and was often capitalized. In recent times has become a generic term for any similar design.

References

• Johnson, H. R. (1955). Backward-wave oscillators. Proceedings of the IRE, 43(6), 684–697.
• Ramo S., Whinnery J. R., Van Duzer T. - Fields and Waves in Communication Electronics (3rd ed.1994) John Wiley & Sons
• Kantorowicz G., Palluel P. - Backward Wave Oscillators, in Infrared and Millimeter Waves, Vol 1, Chap. 4, K. Button ed., Academic Press 1979
• de Graauw Th., Anderegg M., Fitton B., Bonnefoy R., Gustincic J. J. - 3rd Int. Conf. Submm. Waves, Guilford University of Surrey (1978)
• Convert G., Yeou T., in Millimeter and Submillimeter Waves, Chap. 4, (1964) Illife Books, London

External links

Wikimedia Commons has media related to Backward wave oscillator .

• Virtual Valve Museum Thomson CSF CV6124 (Wayback Machine)