BMW N55 | |
---|---|
Overview | |
Production | 2009–2021 |
Layout | |
Configuration | Straight-6 |
Displacement | 3.0 L (2,979 cc) |
Cylinder bore | 84 mm (3.3 in) |
Piston stroke | 89.6 mm (3.5 in) |
Cylinder block material | Aluminium |
Cylinder head material | Aluminium |
Valvetrain | DOHC, with VVT & VVL |
Valvetrain drive system | Chain |
Compression ratio | 10.2:1 |
RPM range | |
Max. engine speed | 7,000 RPM |
Combustion | |
Turbocharger | Single BorgWarner twin-scroll with Intercooler |
Management | Bosch MEVD 17.2 |
Fuel type | Petrol |
Chronology | |
Predecessor | BMW N54 |
Successor | BMW B58 |
The BMW N55 is a turbocharged straight-six petrol (gasoline) engine that began production in 2009. The N55 replaced the BMW N54 engine and was introduced in the F07 5 Series Gran Turismo.
The N55 was BMW's first straight-six engine to use a twin-scroll turbocharger. It also won three straight Ward's 10 Best Engines awards in 2011–2013. [1]
Following the introduction of the BMW B58 engine in 2015, the N55 began to be phased out. [2]
The BMW S55 engine is a high performance version of the N55 made by BMW M GmbH, which is used by the F80 M3, F82 M4 and F87 M2 Competition/CS.
The main differences between the N55 and its N54 predecessor are the use of a single turbocharger, the addition of Valvetronic and the type of fuel injectors. Whilst the N54 used a twin-turbo arrangement, the newer N55 uses only a single twin scroll turbocharger. [3] [4] Valvetronic (variable valve lift) [5] is claimed to improve throttle response, low-rev torque, exhaust emissions and to reduce fuel consumption by 15%. [6] [5] [7] The direct injection system uses solenoid-type injectors, instead of the piezo-type fuel injectors used by its N54 predecessor. The piezo injectors were more expensive and BMW decided they were not worthwhile outside of Europe, because the potential benefits of lean-burn operation could not be fully realised. [5]
The exhaust manifold design, called Cylinder-bank Comprehensive Manifold (CCM) by BMW, aims to reduce the pressure fluctuations to reduce throttle lag and exhaust back-pressure. [8] The twin-scroll turbocharger uses 2 sets of exhaust duct to turn 1 turbine wheel, with cylinders 1–3 and 4–6. [9] The engine management system is Bosch MEVD 17.2, and compatible fuels are ROZ (RON) 91–98 octane (minimum RON 95 is recommended), [10] [11]
As per the N54, the compression ratio is 10.2:1, the bore is 84.0 mm (3.31 in), the stroke is 89.6 mm (3.53 in) and the displacement is 2,979 cc (181.8 cu in).
Version | Power | Torque | Redline | Years |
---|---|---|---|---|
N55B30M0 | 225 kW (302 bhp) at 5,700–5,800 rpm | 400 N⋅m (295 lb⋅ft) at 1,200–5,000 rpm | 7,000 rpm | 2009–2019 |
N55B30 | 235 kW (315 bhp) at 4,505–6,000 rpm | 450 N⋅m (332 lb⋅ft) at 1,300–4,500 rpm | 2011–present | |
N55B30O0 | 240 kW (322 bhp) at 4,505–6,000 rpm | 2014–2016 | ||
N55HP | 250 kW (335 bhp) at 4,505–6,000 rpm | 2013–2015 | ||
N55B30T0 | 265 kW (355 bhp) at 5,255–6,000 rpm | 465 N⋅m (343 lb⋅ft) at 1,350–5,250 rpm | 2015–present | |
272 kW (365 bhp) at 6,500 rpm | 500 N⋅m (369 lb⋅ft) at 1,450–4750 rpm | |||
Alpina | 301 kW (404 bhp) at 5,500–6,250 rpm | 600 N⋅m (443 lb⋅ft) at 3,000–4,000 rpm | 2013–2017 | |
324 kW (434 bhp) at 5,500–6250 rpm | 660 N⋅m (487 lb⋅ft) at 3,000–4,000 rpm | 2017–present | ||
332 kW (445 bhp) at 5,500–6,250 rpm | 680 N⋅m (502 lb⋅ft) at 3,000–4,500 rpm | 2018–present |
Applications:
Applications:
Applications:
Applications:
Applications:
Biturbo engine by Alpina based on the N55B30M0. The crankcase is of a different design and specially cast by BMW for Alpina. [16]
The N55R20A is Alpina's initial version of the N55, producing 301 kW (404 bhp). The twin turbocharger system of the N54B30 is used, replacing the twin-scroll charging system originally applied.
Applications:
Applications:
Application:
BMW S55 engine | |
---|---|
Layout | |
Configuration | Straight-6 |
Displacement | 2,979 cc (182 cu in) |
Cylinder bore | 84 mm (3.3 in) |
Piston stroke | 89.6 mm (3.53 in) |
Cylinder block material | Aluminium |
Valvetrain | DOHC, with VVT & VVL |
RPM range | |
Max. engine speed | 7,600 RPM |
Combustion | |
Turbocharger | Twin-turbo |
Fuel type | Petrol |
Chronology | |
Predecessor | BMW S54 |
Successor | BMW S58 |
The S55 engine is the high performance engine developed from the N55 by BMW M. It was introduced in the F80 M3 and F82 M4 replacing the BMW S65 naturally aspirated V8 engine used in the previous generation M3 and was later used in the F87 M2 Competition/CS.
Differences compared with the N55 include a closed-deck engine block, lightweight crankshaft, different crankshaft bearings, strengthened pistons/rods, different springs/valve material, twin turbos, twin fuel pumps, active exhaust, revised cooling system and intercoolers. [18] [19]
Applications:
Applications:
Applications:
Applications:
Applications:
This version produces 368 kW (493 hp) and 600 N⋅m (443 lb⋅ft), [26] due to the use of a water injection system. Three water injectors are used to lower the temperature of the air in the intake manifold, allowing the boost pressure to be increased from 17.2 psi (1.19 bar) to 21.6 psi (1.49 bar). [27] [28]
Applications:
The BMW 3 Series is a line of compact executive cars manufactured by the German automaker BMW since May 1975. It is the successor to the 02 Series and has been produced in seven generations.
The fifth generation of the BMW 3 Series range of compact executive cars is designated under the model codes E90 (saloon), E91, E92 (coupé) and E93 (convertible). The model was introduced in December 2004, and produced by BMW until October 2013 and is often collectively referred to as the E90 or E9x.
BMW M GmbH, formerly known as BMW Motorsport GmbH, is a subsidiary of BMW AG that manufactures performance cars.
Alpina Burkard Bovensiepen GmbH & Co. KG is an automobile manufacturing company based in Buchloe, in the Ostallgäu district of Bavaria, Germany that develops and sells high-performance versions of BMW cars. Alpina works closely with BMW and their processes are integrated into BMW's production lines, and is recognized by the German Ministry of Transport as an automobile manufacturer, in contrast to other performance specialists, which are aftermarket tuners. The Alpina B7 is produced at the same assembly line in Dingolfing, Germany, as BMW's own 7 Series. The B7's twin-turbo 4.4-litre V8 is assembled by hand at Alpina's facility in Buchloe, Germany, before being shipped to BMW for installation, and the assembled vehicle is then sent back to Alpina for finishing touches.
The BMW M4 is a high-performance version of the BMW 4 Series automobile developed by BMW's motorsport division, BMW M, that has been built since 2014. As part of the renumbering that splits the coupé and convertible variants of the 3 Series into the 4 Series, the M4 replaced those variants of the BMW M3. Upgrades over the standard BMW 4 Series include an upgraded engine, suspension, exhaust system, brakes and weight reduction measures including increased use of carbon fiber, such as on the roof of the car.
The BMW N54 is a twin-turbocharged straight-six petrol engine that was produced from 2006 to 2016. It is BMW's first mass-produced turbocharged petrol engine and BMW's first turbocharged petrol engine since the limited-production BMW M106 was discontinued in 1986. The N54 debuted at the 2006 Geneva Motor Show and was launched in the 335i model of the E90/E91/E92/E93 3 Series range.
G-Power is a German car tuning manufacturer based in Aichach, Bavaria. Founded in 1983 by Jesna Mawela, the company specialises in tuning BMW cars and manufacturing boutique vehicles. Its supercharged 5.0L V-10 830 hp BMW M5 Hurricane RRS reached 372 km/h (231 mph)
The BMW N63 is a twin-turbocharged petrol V8 engine which has been in production from 2008 to present. The N63 is the world's first production car engine to use a "hot-vee" layout, with the turbochargers located inside the "V" of the engine. It is also BMW's first turbocharged petrol V8 engine. The engine has been widely noted for its mechanical issues, undergoing several recalls.
The BMW N57 is a family of aluminium, turbocharged straight-6 common rail diesel engines. The engines utilize variable geometry turbochargers and Bosch piezo-electric injectors. The engine jointly replaced the M57 straight-6 and M67 V8 engines. In 2015 the N57 started to be replaced with the B57 engine, beginning with the G11 730d.
The sixth generation of the BMW 3 Series consists of the BMW F30, BMW F31 and BMW F34 compact executive cars. The F30/F31/F34 generation was produced from October 2011 to 2019 and is often collectively referred to as the F30.
The BMW 4 Series is a range of compact executive cars manufactured by BMW since 2013. The 4 Series was created when BMW spun off the 2-door models of the 3 Series into a separate series. The 4 Series is currently in its second generation.
The BMW M2 is a high-performance version of the BMW 2 Series automobile developed by BMW's motorsport division, BMW M GmbH. As the 2 Series replaced the 1 Series coupé and convertible models, the first-generation M2 was marketed as the most basic M model in the range.
The first generation of the BMW 4 Series consists of the BMW F32, BMW F33 and BMW F36 compact executive cars. The F32/F33/F36 was produced from 2014 to 2020 and is often collectively referred to as the F32.
The first generation of the coupé and convertible range of the BMW 2 Series subcompact executive car consists of the BMW 2 Series (F22) for the coupé version and BMW 2 Series (F23) for the convertible version. The F22/F23 was in production from November 2013 through 2021 and is often collectively referred to as the F22.
The BMW B48 is a turbocharged inline-four petrol engine which replaced the BMW N20 and has been in production since 2014. It was first used in the F56 Mini Hatch and has been used in BMW applications since 2015.
The BMW B58 is a turbocharged straight-six engine, which began production in 2015. The B58 replaced the N55 and was launched in the F30 340i.
The ZF S6-53 is a 6-speed manual transmission manufactured by ZF Friedrichshafen AG. It is designed for longitudinal engine applications, and is rated to handle up to 600 newton-metres (443 lbf⋅ft) of torque.
The Alpina B3 (F30/F31) and Alpina D3 (F30/F31) are high performance compact executive cars manufactured by German automobile manufacturer, Alpina. Based on the BMW 3 Series (F30), the B3 is available in saloon and wagon body styles. The car was officially launched at the 2013 Geneva Motor Show.
The Alpina B3 are a series of high performance executive cars manufactured by German automobile manufacturer Alpina, which is based on the BMW 3 Series of the car manufacturer BMW. As of 2021, it is produced as a sedan (four-door) and station wagon (touring). Up to and including the E90 series, two-door sedans, coupes and convertibles were also offered. With the exception of the convertible, every model was optionally available with all-wheel drive. The current diesel variant runs under the Alpina D3 Biturbo.