BMW N54 engine | |
---|---|
Overview | |
Production | 2006–2016 |
Layout | |
Configuration | Straight-6 |
Displacement | 3.0 L (2,979 cc) |
Cylinder bore | 84 mm (3.3 in) |
Piston stroke | 89.6 mm (3.5 in) |
Cylinder block material | Aluminium |
Cylinder head material | Aluminium |
Valvetrain | DOHC, with VVT |
Valvetrain drive system | Chain |
Combustion | |
Turbocharger | Twin-turbo |
Fuel type | Petrol |
Chronology | |
Predecessor | BMW M54 |
Successor | BMW N55 |
The BMW N54 is a twin-turbocharged straight-six petrol engine that was produced from 2006 to 2016. [1] It is BMW's first mass-produced turbocharged petrol engine and BMW's first turbocharged petrol engine since the limited-production BMW M106 was discontinued in 1986. The N54 debuted at the 2006 Geneva Motor Show and was launched in the 335i model of the E90/E91/E92/E93 3 Series range.
Following the introduction of its BMW N55 successor in 2009, the N54 began to be phased out. The final model powered by the N54 is the E89 Z4 roadster, which was produced until 2016.
The N54 has won six straight International Engine of the Year awards [2] and three straight Ward's 10 Best Engines awards. [3]
There is no BMW M version of the N54, however a high-output version of the N54 is used in the 1 Series M Coupe, Z4 35iS and 335iS models.
The N54 was produced alongside the naturally aspirated BMW N53 engine; both engines have direct injection, double-VANOS (variable valve timing), an open-deck engine block [4] [5] and an electric water pump. [6] [7] [8] Since the N54 is based on the older BMW M54 engine, it has an aluminium engine block (instead of the magnesium alloy used by the N53), a displacement of 2,979 cc (181.8 cu in) and does not have valvetronic (variable valve lift). [9]
Turbocharging is a key difference between the N54 and BMW's previous straight-six engines. The N54 has two small low-pressure turbochargers to minimise turbo lag. BMW's marketed the twin-turbo as "TwinPower Turbo", [10] although the term has since been used for engines which have a single twin-scroll turbocharger. [11] [12] The boost pressure is 8 psi (0.55 bar) and an air-to-air intercooler is used. Compared with the naturally aspirated BMW N52 that it replaced as BMW's highest performance six-cylinder engine, the N54 produces an additional 34 kW (45 bhp) and 108 N⋅m (80 lb⋅ft). [13]
The N54's direct injection system (called "High Precision Injection" by BMW [14] ) uses piezo injectors. Its N55 successor uses solenoid-type injectors, because the piezo injectors are more expensive and not reaching their full potential to obtain the "lean burn" benefit. [15]
Version | Displacement | Power | Torque | Year |
---|---|---|---|---|
N54B30 | 2,979 cc (181.8 cu in) | 225 kW (302 bhp) at 5,800 rpm | 400 N⋅m (295 lb⋅ft) at 1,400-5,000 rpm | 2006-2010 |
240 kW (322 bhp) at 5,800 rpm | 450 N⋅m (332 lb⋅ft) at 1,500-4,500 rpm | 2008-2013 | ||
250 kW (335 bhp) at 5,900 rpm | 2011-2016 | |||
Alpina | 265 kW (355 bhp) at 5,500-6,000 rpm | 500 N⋅m (369 lb⋅ft) at 3,800-5,000 rpm | 2007-2010 | |
294 kW (394 bhp) at 6,000 rpm | 540 N⋅m (398 lb⋅ft) at 4,500 rpm | 2010-2013 | ||
300 kW (402 bhp) at 6,000 rpm | 2012-2013 |
All versions have a bore of 84.0 mm (3.31 in), a stroke of 89.6 mm (3.53 in), a compression ratio of 10.2:1 and the redline is 7000 rpm.
The initial version of the N54 is officially rated at 225 kW (302 bhp) and 400 N·m. [16] However, these figures are considered to be under-rated, [17] and independent testing has resulted in estimates of 232 kW (311 bhp) and 422 N⋅m (311 lb⋅ft). [18]
A variant of the N54B30 with higher peak power and torque is used in the 2008-2012 740i [21] and E92 335is.
The most powerful version of the N54 is found in the E82 1 Series M Coupe and the E89 Z4 sDrive 35is.
Biturbo engine by Alpina based on the N54B30, with upgrades including the engine control unit, oil cooler and pistons.
This is Alpina's initial version of the N54, producing 265 kW (355 bhp). [27]
Applications:
Applications:
Applications:
Car & Driver noted the N54 had minimal turbo lag and "in feel and sound the twin-turbo could pass for naturally aspirated". [28] The N54-engined F01 740i was also praised for its linear power delivery. [29]
Comparing the N54-engined E60 535i with the 550i (using a 4.8–litre naturally aspirated V8), one reviewer noted that the V8 model had more torque but was "only marginally quicker than the 535i" and that the additional weight of the V8 engine was noticeable on twisty mountain roads. [30]
In the United States, some N54 engines experienced failures of the High Pressure Fuel Pump (HPFP), resulting a class action lawsuit, a voluntary recall and an extended warranty for the HPFP.
Failure of the HPFP can cause the engine to suddenly stop functioning, which has caused several near-misses on highways. [31] BMW was aware of HPFP problems, describing them in internal Technical Service Bulletins as "driveability problems". [31]
In April 2009, a class action suit was filed against BMW in connection with HPFP failures. [32] [33] BMW settled the suit in June 2010. On 26 October 2010, following an ABC News story about HPFP failures, [34] BMW announced a recall of vehicles with the pump in question from manufacturing years 2007–2010. [35] [36] The recall was applied to 130,000 cars, resulting in the replacement of the HPFP in approximately 40,000 of these cars. [37]
In the United States, the warranty period for the HPFP was increased to 10 years and 120,000 mi (190,000 km). [38]
On some cars, the HPFP was replaced multiple times without resolving the issue, potentially leading to the car being refunded under the Lemon Laws in some states. [39]
The High Pressure Fuel Pump issue caused BMW North America to extend the warranty for this pump to 10 years or 120,000 mi (190,000 km).
The warranty period for the fuel injectors was also increased, to 10 years or 120,000 mi (190,000 km). [40] [41] An updated design for the fuel injectors was also introduced. [42] [43]
Due to problems with rattling wastegates caused by premature bushing wear, [44] [45] BMW extended the warranty period for wastegate-related issues to 8 years or 82,000 mi (132,000 km). [46]
These warranty extensions only apply to the United States.
The first generation of the BMW 1 Series consists of the BMW E81, BMW E82 (coupe), BMW E87 and BMW E88 (convertible) compact cars. The E81/E82/E87/E88 generation was produced from 2004 until 2013 and is sometimes collectively referred to as the E8x. The E8x replaced the 3 Series Compact as the entry-level models of the BMW range.
BMW M62 is a naturally aspirated V8 petrol engine which was produced from 1995 to 2005. A successor to the BMW M60, the M62 features an aluminium engine block and a single row timing chain.
The fifth generation of the BMW 3 Series range of compact executive cars is designated under the model codes E90 (saloon), E91, E92 (coupé) and E93 (convertible). The model was introduced in December 2004, and produced by BMW until October 2013 and is often collectively referred to as the E90 or E9x.
The first generation of the BMW Z4 consists of the BMW E85 and BMW E86 sports cars. The E85/E86 generation was produced from 2002 to 2008. The E85/E86 replaced the Z3 and is the third model in the BMW Z Series. Initial models were in the roadster (E85) body style, with the coupé (E86) body style being added in 2006. In February 2009, the BMW Z4 (E89) began production as the successor to the E85/E86.
The BMW M54 is a naturally aspirated straight-6 DOHC petrol engine produced from 2000 to 2006. It was released in the E53 X5 and is the replacement for the M52 engine. The S54 is the equivalent high performance engine, used in the E46 M3, the Z3 M Coupé/Roadster and the E85/E86 Z4 M. The BMW M56 SULEV engine is based on the M54.
BMW M GmbH, formerly known as BMW Motorsport GmbH, is a subsidiary of BMW AG that manufactures performance cars.
Alpina Burkard Bovensiepen GmbH & Co. KG is an automobile manufacturing company based in Buchloe, in the Ostallgäu district of Bavaria, Germany that develops and sells high-performance versions of BMW cars. Alpina works closely with BMW and their processes are integrated into BMW's production lines, and is recognized by the German Ministry of Transport as an automobile manufacturer, in contrast to other performance specialists, which are aftermarket tuners. The Alpina B7 is produced at the same assembly line in Dingolfing, Germany, as BMW's own 7 Series. The B7's twin-turbo 4.4-litre V8 is assembled by hand at Alpina's facility in Buchloe, Germany, before being shipped to BMW for installation, and the assembled vehicle is then sent back to Alpina for finishing touches.
The fifth generation of the BMW 7 Series consists of the BMW F01 and BMW F02 full-size luxury sedans. The F01/F02 generation was produced by BMW from 2008 to 2015 and is often collectively referred to as the F01.
The BMW N53 is a naturally aspirated straight-6 petrol engine which was produced from 2006 to 2013. The N53 replaced the BMW N52 and was released in 2006 in the post-facelift E60 5 Series.
The BMW N63 is a twin-turbocharged petrol V8 engine which has been in production from 2008 to present. The N63 is the world's first production car engine to use a "hot-vee" layout, with the turbochargers located inside the "V" of the engine. It is also BMW's first turbocharged petrol V8 engine. The engine has been widely noted for its mechanical issues, undergoing several recalls.
The BMW Z4 (E89) is the second generation of the BMW Z4 range of two-door roadsters, and was produced from 2009 to 2016. The E89 replaced the E85/E86 Z4 and is the fourth model in the BMW Z Series.
The BMW N55 is a turbocharged straight-six petrol (gasoline) engine that began production in 2009. The N55 replaced the BMW N54 engine and was introduced in the F07 5 Series Gran Turismo.
The sixth generation of the BMW 5 Series consists of the BMW F10, F18, BMW F11 and BMW F07 executive cars and were produced by BMW from January 2010 to 2017, with F10 being launched on 20 March 2010 to domestic market and F11 in the summer of 2010. The F07 Gran Turismo was produced from early September 2009 to 2017, being launched in the domestic German market in late October 2009.
The third generation of the BMW 6 Series consists of the BMW F12, BMW F13BMW F06 executive-sized grand tourers. The F12/F13/F06 generation was produced from 2011 to 2018 and is often collectively referred to as the F12.
The first generation of the BMW 4 Series consists of the BMW F32, BMW F33 and BMW F36 compact executive cars. The F32/F33/F36 was produced from 2014 to 2020 and is often collectively referred to as the F32.
The BMW B48 is a turbocharged inline-four petrol engine which replaced the BMW N20 and has been in production since 2014. It was first used in the F56 Mini Hatch and has been used in BMW applications since 2015.
The BMW B58 is a turbocharged straight-six engine, which began production in 2015. The B58 replaced the N55 and was launched in the F30 340i.
The ZF S6-53 is a 6-speed manual transmission manufactured by ZF Friedrichshafen AG. It is designed for longitudinal engine applications, and is rated to handle up to 600 newton-metres (443 lbf⋅ft) of torque.
The Alpina B3 (E90) and Alpina D3 (E90) are a series of high performance compact executive cars manufactured by German automobile manufacturer Alpina from 2007 to 2013. Based on the BMW 3 Series (E90), the B3 and D3 were available in coupé, saloon, convertible and station wagon body styles. The B3 was officially unveiled at the 2007 Geneva Motor Show.