Wine cork

Last updated
A French wine cork Cork p1160013.jpg
A French wine cork

Wine corks are a stopper used to seal wine bottles. They are typically made from cork (bark of the cork oak), though synthetic materials can be used. Common alternative wine closures include screw caps and glass stoppers. 68 percent of all cork is produced for wine bottle stoppers.

Contents

Corks are manufactured for still wines as well as sparkling wines; the latter are bottled under pressure, forcing the corks to take on a mushroom shape. They are fastened with a wire cage known as a muselet.

History

Synthetic corks Vinova synthetic wine closure.jpg
Synthetic corks

As late as the mid-17th century, French vintners did not use cork stoppers, using instead oil-soaked rags stuffed into the necks of bottles. [1] The inventor of cork-based wine stoppers is unknown. Colloquial stories attribute the Benedictine monk Dom Pérignon. The stoppers date to about the 1600s. In the early 21st century, the problem of cork taint became prevalent, leading many producers to stop using corks in favor of alternatives. Screw caps became especially prominent in Australia and New Zealand by 2010. Most cork was sourced from around the Mediterranean Basin, far from the Oceanian countries. [2]

Following issues with cork taint, the cork industry invested in new techniques and equipment, reducing TCA chemicals in wine by 95 percent. Cork producers began promoting the cork's environmental and economic benefits. [2]

Production

Manual corking machine, manufactured c. 1870 Lemp Bottle Corking Machine.jpg
Manual corking machine, manufactured c. 1870

Like other cork products, natural wine corks are derived from the bark of cork oak trees. The bark is carefully peeled away and cut into sheets before processing. The oak trees are not cut down, and only about half of its bark is removed at any time. Cork oaks are first harvested at 25 years old, and take place every 9 years. After the third harvest, the bark is of sufficient quality for producing wine corks. [3]

Portugal is the largest producer of corks, at 52.5 percent, followed by Spain, Italy, and Algeria. The majority of Portugal's production is in the region of Alentejo, at 72 percent of national production. [3] 68 percent of all cork is produced for wine bottle stoppers. [2] [3]

Products

Corks can be made in several ways: [4]

Attributes

Wine corks in variety Wine corks, Rostov-on-Don, Russia.jpg
Wine corks in variety

Cork stoppers are moisture-resistant, are slow to deteriorate, they help wine age, and provide a waterproof seal. The stoppers are associated with a perception of high quality wine, especially as cheaper alternatives are common with lower-cost wine. [2]

Because of the cellular structure of cork, it is easily compressed upon insertion into a bottle and will expand to form a tight seal. The interior diameter of the neck of glass bottles tends to be inconsistent, making this ability to seal through variable contraction and expansion an important attribute. However, unavoidable natural flaws, channels, and cracks in the bark make the cork itself highly inconsistent. In a 2005 closure study, 45% of corks showed gas leakage during pressure testing both from the sides of the cork as well as through the cork body itself. [5]

A study conducted by PricewaterhouseCoopers and commissioned by the major cork manufacturer Amorim concluded that cork is the most environmentally responsible stopper, in a one-year life cycle analysis comparison with plastic stoppers and aluminum screw caps. [6] [7]

Reuse

Christmas decor from repurposed corks Cork tree and wreath.jpg
Christmas decor from repurposed corks

Wine corks cannot be reused as wine corks due to bacterial concerns, but they can be recycled into many other useful objects such as corkboards, coasters, flooring and used for all kinds of craft projects. While many synthetic corks can be recycled  [ de ] at home, natural corks can either be composted or recycled at specific stores. Companies partner with stores to accept used corks and recycle them into other products; ReCork is the largest of these companies in the United States. [8] Corks can also be recycled through Cork Forest Conservation Alliance. [9]

Types

Still wine

Corks typically are 24–25 millimetres (0.94–0.98 in) in diameter. Lengths vary, usually based on length of time estimated to age the wine. Simple wines are commonly 38 millimetres (1.5 in) long, medium aging wines (the most popular size) are 44 millimetres (1.7 in), and long aging or expensive wines are often 49–55 millimetres (1.9–2.2 in) long. [10]

Sparkling wine

Cork and muselet on a bottle of Franciacorta Muselet 01.jpg
Cork and muselet on a bottle of Franciacorta
Bouchon de champagne neuf.jpg
Korken fur Champagnerflasche 2018-15.JPG
Champagne corks before and after usage

Sparkling wine corks are typically 30 millimetres (1.2 in) in diameter and 50 millimetres (2.0 in) in length. When pushed into the bottle, the corks are compressed to about 60–70 percent of their original diameters. [10] The corks are held in place by wire cages known as muselets.

Sparkling wine corks are mostly built from three sections and are referred to as agglomerated corks. The mushroom shape that occurs in the transition is a result of the bottom section's being composed of two stacked discs of pristine cork cemented to the upper portion, which is a conglomerate of ground cork and glue. The bottom section is in contact with the wine. Before insertion, a sparkling wine cork is almost 50% larger than the opening of the bottle. Originally, the cork starts as a cylinder and is compressed before insertion into the bottle. Over time, their compressed shape becomes more permanent and the distinctive "mushroom" shape becomes more apparent.

The aging of the wine post-disgorgement can to some degree be told by the cork, as, the longer it has been in the bottle, the less it returns to its original cylinder shape.

See also

Related Research Articles

<span class="mw-page-title-main">Champagne</span> French sparkling wine

Champagne is a sparkling wine originated and produced in the Champagne wine region of France under the rules of the appellation, which demand specific vineyard practices, sourcing of grapes exclusively from designated places within it, specific grape-pressing methods and secondary fermentation of the wine in the bottle to cause carbonation.

<span class="mw-page-title-main">Cork (material)</span> Tree bark tissue harvested for commercial use

Cork is an impermeable buoyant material. It is the phellem layer of bark tissue which is harvested for commercial use primarily from Quercus suber, which is native to southwest Europe and northwest Africa. Cork is composed of suberin, a hydrophobic substance. Because of its impermeable, buoyant, elastic, and fire retardant properties, it is used in a variety of products, the most common of which is wine stoppers.

<span class="mw-page-title-main">Bottle</span> Narrow-necked container

A bottle is a narrow-necked container made of an impermeable material in various shapes and sizes that stores and transports liquids. Its mouth, at the bottling line, can be sealed with an internal stopper, an external bottle cap, a closure, or induction sealing.

<i>Quercus suber</i> Species of plant

Quercus suber, commonly called the cork oak, is a medium-sized, evergreen oak tree in the section Quercus sect. Cerris. It is the primary source of cork for wine bottle stoppers and other uses, such as cork flooring and as the cores of cricket balls. It is native to southwest Europe and northwest Africa. In the Mediterranean basin the tree is an ancient species with fossil remnants dating back to the Tertiary period. It can survive for as long as two centuries. Typically, once it reaches 25 years old, its thick bark can be harvested for cork every 9 to 12 years without causing harm to the tree.

<span class="mw-page-title-main">Bottle cap</span> Top for holding liquid inside a bottle

A bottle cap or bottle top is a closure for the top opening of a bottle. A cap is sometimes colorfully decorated with the logo of the brand of contents. Plastic caps are used for plastic bottles, while metal with plastic backing is used for glass; plastic caps are commonly made from polyethylene or polypropylene, while metal caps are usually either steel or aluminum. Plastic caps may have a pour spout. Flip-Top caps like Flapper closures provide controlled dispensing of dry products. Caps for plastic bottles are often made of a different type of plastic from the bottle.

<span class="mw-page-title-main">Jar</span> Rigid, approximately cylindrical container with a wide mouth or opening

A jar is a rigid, cylindrical or slightly conical container, typically made of glass, ceramic, or plastic, with a wide mouth or opening that can be closed with a lid, screw cap, lug cap, cork stopper, roll-on cap, crimp-on cap, press-on cap, plastic shrink, heat sealed lidding film, an inner seal, a tamper-evident band, or other suitable means. The English word "jar" originates from the Arabic word jarra, which means an earthen pot or vessel.

<span class="mw-page-title-main">Stopper (plug)</span> Conical closure used to seal a container

A stopper, bung, or cork is a cylindrical or conical closure used to seal a container, such as a bottle, tube, or barrel.

<span class="mw-page-title-main">Corkscrew</span> Kitchen tool for drawing corks from wine bottles

A corkscrew is a tool for drawing corks from wine bottles and other household bottles that may be sealed with corks. In its traditional form, a corkscrew simply consists of a pointed metallic helix attached to a handle, which the user screws into the cork and pulls to extract it. Corkscrews are necessary because corks themselves, being small and smooth, are difficult to grip and remove, particularly when inserted fully into an inflexible glass bottle. More recent styles of corkscrew incorporate various systems of levers that further increase the amount of force that can be applied outwards upon the cork, making the extraction of difficult corks easier.

<span class="mw-page-title-main">Bottling line</span> Production line for filling bottles

Bottling lines are production lines that fill a liquid product, often a beverage, into bottles on a large scale. Many prepared foods are also bottled, such as sauces, syrups, marinades, oils and vinegars.

<span class="mw-page-title-main">Bottle opener</span> Device for removing metal caps from bottles

A bottle opener is a device that enables the removal of metal bottle caps from glass bottles. More generally, it might be thought to include corkscrews used to remove cork or plastic stoppers from wine bottles.

<span class="mw-page-title-main">Closure (container)</span> Devices and techniques used to close or seal a bottle, jug, jar, tube, can, etc.

A closure is a device used to close or seal a container such as a bottle, jug, jar, tube, or can. A closure may be a cap, cover, lid, plug, liner, or the like. The part of the container to which the closure is applied is called the finish.

Wine accessories are things that may be used in the storage or serving of wine. Wine accessories include many items such as wine glasses, corkscrews, and wine racks.

<span class="mw-page-title-main">Glass bottle</span> Narrow-necked container

A glass bottle is a bottle made from glass. Glass bottles can vary in size considerably, but are most commonly found in sizes ranging between about 200 millilitres and 1.5 litres. Common uses for glass bottles include food condiments, soda, liquor, cosmetics, pickling and preservatives; they are occasionally also notably used for the informal distribution of notes. These types of bottles are utilitarian and serve a purpose in commercial industries.

<span class="mw-page-title-main">Alternative wine closure</span> Alternative methods for wine closure

Alternative wine closures are substitute closures used in the wine industry for sealing wine bottles in place of traditional cork closures. The emergence of these alternatives has grown in response to quality control efforts by winemakers to protect against "cork taint" caused by the presence of the chemical trichloroanisole (TCA).

<span class="mw-page-title-main">Closure (wine bottle)</span> Term for stoppers used to seal wine bottles

Closure is a term used in the wine industry to refer to a stopper, the object used to seal a bottle and avoid harmful contact between the wine and oxygen.

This glossary of winemaking terms lists some of terms and definitions involved in making wine, fruit wine, and mead.

<span class="mw-page-title-main">Screw cap (wine)</span> Cap for wine bottles

A screw cap is a metal, normally aluminium, cap that screws onto threads on the neck of a wine bottle, generally with a metal skirt down the neck to resemble the traditional wine capsule ("foil"). A layer of plastic, cork, rubber, or other soft material is used as wad to make a seal with the mouth of the bottle. Its use as an alternative to cork for sealing wine bottles is gaining increasing support. In markets such as Australia and New Zealand screw caps on bottles have overtaken cork to become the most common means of sealing bottles.

<span class="mw-page-title-main">Muselet</span> Wire cage to secure corked bottles of carbonated beverages

A muselet is a wire cage that fits over the cork of a bottle of champagne, sparkling wine or beer to prevent the cork from emerging under the pressure of the carbonated contents. It derives its name from the French museler, to muzzle. The muselet often has a metal cap incorporated in the design which may show the drink maker's emblem. They are normally covered by a metal foil envelope. Muselets are also known as wirehoods or Champagne wires.

<span class="mw-page-title-main">Flip-top</span>

A flip-top, swing-top, lightning toggle, or Quillfeldt stopper is a type of bail closure frequently used for bottles containing carbonated beverages, such as beer or mineral water. The mouth of the bottle is sealed by a stopper, usually made of porcelain or plastic, fitted with a rubber gasket and held in place by a permanently attached wire bail. The bottle can be opened and resealed repeatedly without the use of a bottle opener, with the wires acting in the same way as a latch clamp. The flip-top was the dominant method of sealing beer and mineral water bottles prior to the invention of the crown cork.

References

  1. Prlewe, J. Wine From Grape to Glass. New York: Abbeville Press, 1999, p. 110.
  2. 1 2 3 4 John Gifford (2016-02-25). "How Millennials (Almost) Killed the Wine Cork". The Atlantic. Retrieved 2020-02-27.
  3. 1 2 3 João Santos Pereira; Miguel Nuno Bugalho; Maria da Conceição Caldeira (2008). "From the Cork Oak to cork" (PDF). APCOR. Retrieved February 28, 2020.
  4. "Corks". APCOR. Retrieved February 28, 2020.
  5. Gibson, Richard, Scorpex Wine Services (2005). "variability in permeability of corks and closures" (PDF). Archived from the original (PDF) on May 12, 2013.{{cite web}}: CS1 maint: multiple names: authors list (link)
  6. "Evaluation of the environmental impacts of Cork Stoppers versus Aluminium and Plastic Closures: Analysis of the life cycle of Cork, Aluminium and Plastic Wine Closures" (PDF). December 4, 2008. Archived from the original (PDF) on February 26, 2020. Retrieved February 26, 2020.
  7. Easton, Sally (4 December 2008). "Cork is the most sustainable form of closure, study finds". Decanter. Retrieved February 26, 2020.
  8. "Can You Recycle Wine Corks? Here's How You Can Best Dispose of Them". 17 June 2019.
  9. "How to recycle wine corks - Sure wine not". 2022-09-10. Retrieved 2022-10-17.
  10. 1 2 Yair Margalit, PhD (November 2012). Concepts in Wine Technology, Small Winery Operations, Third Edition – Yair Margalit, PhD – Google Books. ISBN   978-1-935879-78-7 . Retrieved 2020-02-27.