Tranquility (ISS module)

Last updated

Tranquility
Node 3 - Isolated view.jpg
Tranquility in 2011
Module statistics
Part of International Space Station
Launch date 8 February 2010, 09:14:08  UTC
Launch vehicle Space Shuttle Endeavour
Berthed 12 February 2010 (Unity  port)
Mass 19,000 kg (42,000 lb)
Length6.706 m (22.00 ft)
Diameter4.48 m (14.7 ft)

Tranquility, also known as Node 3, [1] is a module of the International Space Station (ISS). It contains environmental control systems, life support systems, a toilet, exercise equipment, and an observation cupola.

Contents

The European Space Agency (ESA) and the Italian Space Agency (ASI) had Tranquility manufactured by Thales Alenia Space. A ceremony on 20 November 2009 transferred ownership of the module to NASA. [2] On 8 February 2010, NASA launched the module on the Space Shuttle's STS-130 mission.

Design and manufacturing

Interior of Tranquility S130e007632.jpg
Interior of Tranquility
The Tranquility node during initial manufacturing Iss Node 3.JPG
The Tranquility node during initial manufacturing

Tranquility was built within the ESA-NASA ISS bartering system. ESA committed to build and fund both Harmony and Tranquility as well as the ATV in order to use NASA ISS facilities, fly astronauts on the Shuttle and for other ISS services. ESA teamed up with the Italian Space Agency (ASI [lower-alpha 1] ) to manufacture both Harmony and Tranquility at Thales Alenia Space's site in Turin, Italy. The module pressure shell is constructed of 2219 aluminum and its debris shield is made from hardened 6061 aluminum. The metal is heat-treated, enabling it to have similar ballistics resistance to stainless steel. [3]

Tranquility provides six berthing locations with power, data and commanding, thermal and environmental control, and crew access for more attached habitable volumes or for crew transportation vehicles or stowage, or an appropriate combination of all of these. One of the berthing locations is used by the Cupola , which houses a Robotic Work Station inside it to assist in the assembly/maintenance of the ISS, and offers a window for Earth observations. Tranquility was launched with the Cupola attached to its port-facing Common Berthing Mechanism (CBM). After mating Tranquility with the port CBM of Unity, the Cupola was transferred to the nadir facing port of Tranquility where it will stay.

The module has three redundant berthing ports that were not scheduled to be used prior to the end of the Space Shuttle program, although there is a Power Data Grapple Fixture reserved for the Special Purpose Dexterous Manipulator (Dextre), which is located on the zenith berthing location. In the current ISS configuration Tranquility is docked to the port berthing location of Unity. As such, the three unused berthing locations of Tranquility were disabled as the node's close proximity to other segments would prohibit the port's direct use for cargo spacecraft or using the docking module PMA-3, which was relocated from Harmony to the port berthing location of Tranquility for storage. At the time, the move of PMA-3 to the port location of Tranquility was required because NASA decided to leave the Multi-Purpose Logistics Module (MPLM) Leonardo permanently attached to the ISS, which will be located at the nadir side of Unity.

In 2001, NASA considered changing the design of the module. This idea for an extended or "stretched" module, [4] was a result of the deferral/deletion of the Habitation Module. The stretched module would have held 16 racks, compared with the baseline capacity of eight racks. This modification was not funded and the plans were abandoned.

Purpose

Space toilet inside Node 3, after relocation from the U.S. lab Waste and hygiene compartment in the Destiny laboratory of the International Space Station - 20090412.jpg
Space toilet inside Node 3, after relocation from the U.S. lab

The module's life-support system (ECLSS) recycles waste water for crew use and generates oxygen for the crew to breathe. In addition, Tranquility contains an atmosphere revitalization system to remove contaminants from the atmosphere and monitor/control the atmosphere constituents of the ISS. Tranquility also contains a Waste and Hygiene Compartment (toilet) for supporting the on-board crew.

Tranquility is primarily used for exercise, storage, and robotics work in connection with Cupola.

Launch, berthing, and connections to other station components

Tranquility in the SSPF Node 3 in SSPF.JPG
Tranquility in the SSPF

Tranquility was located in the clean room at the Thales Alenia Space, Turin site until 2009. [5] It was shipped to Kennedy Space Center (KSC) on 17 May 2009 and arrived in Florida on 20 May 2009. It was officially welcomed to KSC on 8 June 2009. [6]

Tranquility was launched on 8 February 2010 on board the STS-130 mission flown by Endeavour . [7] It was berthed to the port side of Unity on 12 February 2010. [8]

To accommodate the SpaceX Dragon V2 and Boeing Starliner Commercial Crew transports expected to be operational by 2017, ISS crews began work in March 2015 to configure the station. As part of this work, Pressurized Mating Adapter-3 on the port side of Tranquility will be moved to the zenith port of the Harmony module, above Pressurized Mating Adapter-2, to serve as a backup docking port for these vehicles. In addition, on 27 May 2015 the Leonardo Permanent Multipurpose Module was moved from the nadir of Unity, to the forward port side of Tranquility to free up Unity as a backup port for Commercial Resupply Services cargo spacecraft from SpaceX and Orbital Sciences. [9] [10]

In April 2016, as part of the cargo payload from SpaceX CRS-8, the Bigelow Expandable Activity Module (BEAM) was attached to Tranquility on its aft port for a two-year duration. [11]

Port
Starboard
Forward
Aft
Nadir

Naming contest

NASA held an online poll to name Node 3. Users were allowed to choose from among four provided names (Earthrise, Legacy, Serenity, and Venture), or to suggest their own. [13] In early voting, fans of the science fiction TV series Firefly boosted "Serenity", also the name of the show and film's eponymous spacecraft, to the top with 86%. [14] On 3 March 2009, episode of The Colbert Report , host Stephen Colbert instructed his viewers to suggest "Colbert" as the name for Node 3 in the online poll. [15]

Following Colbert's call to have the node named after him, several other groups attempted to influence the vote. For example, a number of different environmental groups promoted the name "Amazonia", after the Amazon Rainforest. They argued that the name was more appropriate given that Node 3 will include the station's environmental control systems. [16] Humorist Dave Barry urged readers of his blog to name the node "Buddy", which finished as the sixth most popular user-suggested name. [17] Gaia Online asked its users to "Send Gaia to Space" by naming the node "Gaia", referring to the Greek goddess of the planet Earth, [18] and "Gaia" finished third among the user-suggested names. [17] Other popular user suggestions included "myYearbook", "SocialVibe", "Ubuntu", and the name of Scientology's galactic overlord: "Xenu". [17]

"Serenity" was the top choice among the NASA-provided names, with 70% of the vote, but finished second overall, losing to "Colbert" by more than 40,000 votes. [17] The naming contest rules, however, state that although the poll results will be taken into account, NASA has ultimate discretion in choosing an appropriate name for the node. [13] On 6 April 2009, Stephen Colbert, in jest, threatened a lawsuit if the node was not named after him. [19] In addition, United States Congressman Chaka Fattah stated that he believes that paying attention to democracy and voting results should not be limited to earthbound organizations so he planned to use congressional power to force NASA to honor the winning Colbert write-in votes. [20]

On 14 April 2009, astronaut Sunita Williams appeared on The Colbert Report, and announced the name of the node would be Tranquility. The name was chosen in honor of the 40th Anniversary of the first lunar landing of Apollo 11 on the Sea of Tranquility. [21] However, the treadmill the astronauts use for exercise has been named "C.O.L.B.E.R.T." for "Combined Operational Load Bearing External Resistance Treadmill" and is located in Tranquility. [22] Colbert was thrilled and happily accepted this offer. The treadmill traveled to space aboard Space Shuttle mission STS-128 on 28 August 2009, for eventual installation in the Tranquility node during STS-130.

See also

Related Research Articles

<span class="mw-page-title-main">International Space Station</span> Inhabited space station in low Earth orbit (1998–present)

The International Space Station (ISS) is a large space station that was assembled and is maintained in low Earth orbit by a collaboration of five space agencies and their contractors: NASA, Roscosmos (Russia), ESA (Europe), JAXA (Japan), and CSA (Canada). The ISS is the largest space station ever built. Its primary purpose is to perform microgravity and space environment experiments.

<i>Columbus</i> (ISS module) ESA science observatory on the International Space Station

Columbus is a science laboratory that is part of the International Space Station (ISS) and is the largest single contribution to the ISS made by the European Space Agency (ESA).

<span class="mw-page-title-main">STS-88</span> First Space Shuttle mission to the International Space Station

STS-88 was the first Space Shuttle mission to the International Space Station (ISS). It was flown by Space Shuttle Endeavour, and took the first American module, the Unity node, to the station.

<span class="mw-page-title-main">STS-98</span> 2001 American crewed spaceflight to the ISS

STS-98 was a 2001 Space Shuttle mission to the International Space Station (ISS) flown by Space Shuttle Atlantis. It was the first human spaceflight launch of the 21st century. STS-98 delivered to the station the Destiny Laboratory Module. All mission objectives were completed and the shuttle reentered and landed safely at Edwards Air Force Base on 20 February 2001, after twelve days in space, six of which were spent docked to the ISS.

<span class="mw-page-title-main">Multi-Purpose Logistics Module</span> Large pressurized container for cargo resupply of the International Space Station

A Multi-Purpose Logistics Module (MPLM) is a large pressurized container that was used on Space Shuttle missions to transfer cargo to and from the International Space Station (ISS). Two MPLMs made a dozen trips in the Shuttle cargo bay and initially berthed to the Unity and later the Harmony module on the ISS. Once attached, supplies were offloaded, and finished experiments and waste were reloaded. The MPLM was then transferred back into the Shuttle’s cargo bay for return to Earth. Three modules were built by Alenia Aeronautica for the Italian Space Agency (ASI). They were named Leonardo, Raffaello, and Donatello.

<i>Cupola</i> (ISS module) Observation module of the International Space Station

The Cupola is an ESA-built observatory module of the International Space Station (ISS). Its name derives from the Italian word cupola, which means "dome". Its seven windows are used to conduct experiments, dockings and observations of Earth. It was launched aboard Space Shuttle Endeavour's mission STS-130 on 8 February 2010, and attached to the Tranquility module. With the Cupola attached, ISS assembly reached 85 percent completion. The Cupola's central window has a diameter of 80 cm (31 in).

<i>Unity</i> (ISS module) American module of the International Space Station

Unity, also known as Node 1, is the first U.S.-built component of the International Space Station (ISS). This cylindrical module, constructed of steel by Boeing for NASA, serves as the critical link between the orbiting laboratory's Russian Orbital Segment and US Orbital Segment.

<i>Destiny</i> (ISS module) Primary US ISS module

The Destiny module, also known as the U.S. Lab, is the primary operating facility for U.S. research payloads aboard the International Space Station (ISS). It was berthed to the Unity module and activated over a period of five days in February, 2001. Destiny is NASA's first permanent operating orbital research station since Skylab was vacated in February 1974.

<i>Harmony</i> (ISS module) American module of the International Space Station

Harmony, also known as Node 2, is the "utility hub" of the International Space Station. It connects the laboratory modules of the United States, Europe and Japan, as well as providing electrical power and electronic data. Sleeping cabins for four of the crew are housed here.

<span class="mw-page-title-main">STS-128</span> 2009 American crewed spaceflight to the ISS

STS-128 was a NASA Space Shuttle mission to the International Space Station (ISS) that launched on August 28, 2009. Space ShuttleDiscovery carried the Multi-Purpose Logistics Module Leonardo as its primary payload. Leonardo contained a collection of experiments for studying the physics and chemistry of microgravity. Three spacewalks were carried out during the mission, which removed and replaced a materials processing experiment outside ESA's Columbus module, and returned an empty ammonia tank assembly.

<span class="mw-page-title-main">STS-130</span> 2010 American crewed spaceflight to the ISS

STS-130 was a NASA Space Shuttle mission to the International Space Station (ISS). Space ShuttleEndeavour's primary payloads were the Tranquility module and the Cupola, a robotic control station with six windows around its sides and another in the center, providing a 360-degree view around the station. Endeavour launched at 04:14 EST on February 8, 2010 and landed at 22:22 EST on February 21, 2010, on runway 15 at the Kennedy Space Center's Shuttle Landing Facility.

<span class="mw-page-title-main">Pressurized Mating Adapter</span> Spacecraft docking adapter

A Pressurized Mating Adapter (PMA) is a component used on the International Space Station (ISS) to convert the Common Berthing Mechanism (CBM) interface used to connect ISS modules to an APAS-95 spacecraft docking port. Three PMAs are attached to the US Orbital Segment of ISS. PMA-1 and PMA-2 were launched along with the Unity module in 1998 aboard STS-88; PMA-3 was launched in 2000 aboard STS-92. PMA-1 permanently connects the Unity and Zarya modules. International Docking Adapters were permanently installed on PMA-2 and PMA-3 in 2017 to convert them from the APAS-95 standard to the newer International Docking System Standard (IDSS).

<span class="mw-page-title-main">Thales Alenia Space</span> Satellite manufacturer

Thales Alenia Space is a joint venture between the French technology corporation Thales Group (67%) and Italian defense conglomerate Leonardo (33%). The company is headquartered in Cannes, France.

<span class="mw-page-title-main">Assembly of the International Space Station</span> Process of assembling the International Space Station

The process of assembling the International Space Station (ISS) has been under way since the 1990s. Zarya, the first ISS module, was launched by a Proton rocket on 20 November 1998. The STS-88 Space Shuttle mission followed two weeks after Zarya was launched, bringing Unity, the first of three node modules, and connecting it to Zarya. This bare 2-module core of the ISS remained uncrewed for the next one and a half years, until in July 2000 the Russian module Zvezda was launched by a Proton rocket, allowing a maximum crew of three astronauts or cosmonauts to be on the ISS permanently.

<i>Leonardo</i> (ISS module) Italian module of the International Space Station

Leonardo, also known as the Permanent Multipurpose Module (PMM) is a module of the International Space Station. It was flown into space aboard the Space Shuttle Discovery on STS-133 on 24 February 2011 and installed on 1 March. Leonardo is primarily used for storage of spares, supplies and waste on the ISS, which was until then stored in many different places within the space station. It is also the personal hygiene area for the astronauts who live in the US Orbital Segment. The Leonardo PMM was a Multi-Purpose Logistics Module (MPLM) before 2011, then was modified into its current configuration. It was formerly one of two MPLM used for bringing cargo to and from the ISS with the Space Shuttle. The module was named for Italian polymath Leonardo da Vinci.

<span class="mw-page-title-main">US Orbital Segment</span> US components of the International Space Station

The US Orbital Segment (USOS) is the name given to the components of the International Space Station (ISS) constructed and operated by the United States National Aeronautics and Space Administration (NASA), European Space Agency (ESA), Canadian Space Agency (CSA) and Japan Aerospace Exploration Agency (JAXA). The segment consists of eleven pressurized components and various external elements, almost all of which were delivered by the Space Shuttle.

<span class="mw-page-title-main">European contribution to the International Space Station</span> Overview of the contribution to the International Space Station from Europe

The European contribution to the International Space Station comes from 10 members of the European Space Agency (ESA) and amounts to an 8% share in the programme. It consists of a number of modules in the US Orbital Segment, ATV supply ships, launchers, software and €8 billion.

<span class="mw-page-title-main">Nanoracks Bishop Airlock</span> Component of the International Space Station

The Nanoracks Bishop Airlock is a commercially funded airlock module launched to the International Space Station on SpaceX CRS-21 on 6 December 2020. It was berthed to the Tranquility module on 19 December 2020 by the Canadarm2. The module was built by Nanoracks, Thales Alenia Space, and Boeing. It is used to deploy CubeSats, small satellites, and other external payloads for NASA, Center for the Advancement of Science in Space (CASIS), and other commercial and governmental customers. NASA plans on using the airlock as a brand new way to dispose large pieces of trash. The name refers to the bishop chess piece, which moves diagonally.

<span class="mw-page-title-main">Axiom Orbital Segment</span> Planned ISS component

Axiom Orbital Segment or Axiom Segment are the planned modular components of the International Space Station (ISS) designed by Houston, Texas-based Axiom Space for commercial space activities. Axiom Space gained initial NASA approval for the venture in January 2020. Axiom Space was later awarded the contract by NASA on February 28, 2020. This orbital station will be separated from the ISS to become a modular space station, Axiom Station, after the ISS is decommissioned.

<span class="mw-page-title-main">Lunar I-Hab</span> Planned lunar habitat module

The Lunar I-Hab is designed as a habitat module of the Lunar Gateway station, to be built by the European Space Agency (ESA) in collaboration with the Japan Aerospace Exploration Agency, or JAXA. The I-HAB will have a maximum launch mass of 10,000 kg (22,000 lb) and provide a habitable volume of 10 m3 (350 cu ft).

References

  1. ↑ "ESA - Node 3: Connecting module". ESA. Archived from the original on 26 February 2024. Retrieved 2 July 2015.
  2. ↑ "NASA Receives Tranquility". NASA. 23 October 2010. Archived from the original on 11 August 2023. Retrieved 12 August 2013.
  3. ↑ "Node-3" (PDF). ESA. Retrieved 9 June 2020.
  4. ↑ "ISS Program Update 23 Feb 2001" (PDF). NASA. Archived from the original on 26 February 2009. Retrieved 4 December 2022.{{cite web}}: CS1 maint: bot: original URL status unknown (link)
  5. ↑ "Space Shuttle astronauts visit Thales Alenia Space in Turin". Skycontrol. Archived from the original on 16 March 2009.
  6. ↑ "European-built ISS module welcomed to KSC". ESA.
  7. ↑ "NASA - Consolidated Launch Manifest". NASA. Archived from the original on 7 March 2009. Retrieved 4 March 2008.PD-icon.svg This article incorporates text from this source, which is in the public domain .
  8. ↑ "STS-130 Mission Status Center". Spaceflight Now.
  9. ↑ "Module Relocated Prepping Station for Commercial Crew | Space Station". blogs.nasa.gov. NASA. 27 May 2015. Retrieved 27 May 2015.PD-icon.svg This article incorporates text from this source, which is in the public domain .
  10. ↑ "EVA-30 concludes latest ISS commercial crew preparations". NASASpaceFlight.com. 25 February 2015.
  11. ↑ "NASA to launch Expandable Habitat to International Space station". Clarksville Online. 15 March 2015.
  12. ↑ Foust, Jeff (12 August 2019). "NASA planning to keep BEAM module on ISS for the long haul". SpaceNews. Retrieved 27 February 2020.
  13. 1 2 "Help NASA Name Node 3! - Contest Rules". NASA. Archived from the original on 23 February 2009. Retrieved 23 March 2008.PD-icon.svg This article incorporates text from this source, which is in the public domain .
  14. ↑ Cynthia (2 March 2008). "Help NASA Name a Node". SF Universe. Archived from the original on 15 May 2009.
  15. ↑ "Name the NASA Module After Stephen". colbertnation.com. 3 March 2008. Retrieved 4 March 2008.
  16. ↑ "Amazonia vs. Colbert". Amazoniavscolbertproject. Retrieved 4 March 2008.
  17. 1 2 3 4 "Help NASA Name Node 3!". NASA. Archived from the original on 21 February 2009. Retrieved 23 March 2008.PD-icon.svg This article incorporates text from this source, which is in the public domain .
  18. ↑ "Let's send Gaia to SPACE!". gaiaonline.com. Retrieved 12 March 2009.
  19. ↑ "Space Module: Colbert - Urine Recycling Room". The Colbert Report. Season 5. 8 April 2009. Comedy Central.
  20. ↑ Mark, Roy (26 March 2009). "Lawmaker Backs Stephen Colbert's NASA Win". eWeek. Retrieved 31 March 2009.[ permanent dead link ]
  21. ↑ "Station Module Named 'Tranquility' to Honor Apollo 11". NASA. Archived from the original on 8 August 2009. Retrieved 1 December 2009.PD-icon.svg This article incorporates text from this source, which is in the public domain .
  22. ↑ "NASA names space module for moon base ... not Colbert". collectSPACE.

Note list

  1. ↑ Agenzia Spaziale Italiana
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.