Subaru FB engine | |
---|---|
Overview | |
Manufacturer | Subaru |
Production | 2010–present |
Layout | |
Configuration | Flat-4 |
Displacement |
|
Cylinder bore |
|
Piston stroke |
|
Valvetrain | DOHC 4 valves x cyl. with AVCS |
Compression ratio | 10.5:1, 11.0:1, 12.5:1 |
Combustion | |
Turbocharger | Optional |
Fuel system | Fuel injection |
Fuel type | Gasoline |
Cooling system | Water-cooled |
Output | |
Power output | 84–136 kW (114–185 PS; 113–182 hp) |
Torque output | 15.3–25.5 kg⋅m (150–250 N⋅m; 111–184 lbf⋅ft) |
Chronology | |
Predecessor | EJ |
Successor | FA, CB |
The Subaru FB engine is the third and current generation of gasoline boxer-4 engine used in Subaru automobiles, and was announced on 23 September 2010. [1] It follows the previous generation EJ-series engine which was introduced in 1989 and the first generation EA-series which was introduced in 1966. By increasing piston stroke and decreasing piston bore, Subaru aimed to reduce emissions and improve fuel economy, while increasing and broadening torque output compared to the EJ-series.
The Subaru FA engine series was derived later from the FB, but the two engine families share only a few common parts. In 2020, Subaru introduced the CB18 engine with improved efficiency to succeed the FB in several applications.
Unofficially, Subaru stated that "FB" stands for "FHI/Future and Brand New/Boxer". [2] It was announced in September 2010 as the third generation (following the EA 1st and EJ 2nd generations) boxer engine family with 2.0 litre and 2.5 litre naturally aspirated variants. [3] The FB has an all new block and head featuring dual overhead cams with intake and exhaust variable valve timing (which Subaru designates as AVCS, standing for Active Valve Control System), and a timing chain that replaced the timing belt. Moving to chain-driven cams is said to allow the valves to be placed at a more narrow angle to each other and shrink the bore of cylinder from 99.5 to 94 mm (3.92 to 3.70 in). It results in less unburned fuel during cold start, thereby reducing emissions. Subaru is able to maintain the exterior dimension substantially unchanged by using asymmetrical connecting rods like those in the EZ36 engine. The FB is only marginally heavier than an equivalent-displacement EJ. In Jan 2011, Car and Driver was told direct injection would be added soon. [4]
Subaru claims a 28-percent reduction in friction losses, mainly due to lighter pistons and connecting rods. [4] [5] A compact oil pump is also credited with contributing to the reduction in friction losses. [1] The FB has a 10% improvement in fuel economy [1] with the power coming on sooner and the torque band being broader. [6]
The compression ratio is slightly higher, and the stroke has increased compared to the EJ engine; previously, the chassis precluded a longer stroke. These changes improve combustion efficiency and allow higher torque at lower speeds. The FB is built at Gunma Oizumi Plant and was initially available as a 2.5 litre displacement engine, starting in Forester models, with a 2.0 litre model to follow in Imprezas. [1] [4] 0W–20 oil is used to help fuel economy, and approximately 1 litre more oil is used as the newly adopted timing chain requires an oil supply. [2]
All FB16 variants:
The FB16 direct injection turbocharged (DIT) engine is the first FB-series engine with a turbocharger, and includes direct injection with an auto stop/start system. It is the base engine in the first-generation (2014–20 model years) Subaru Levorg. The Levorg also has an option for a 2.0 litre direct injection turbo engine, the FA20F. [7] [8] The design target for the FB16 DIT engine was to equal or exceed the performance of the FB25 naturally-aspirated engine fitted to the Legacy, using regular gasoline, according to the designer, Rei Sasaki. Although it shares its displacement with the naturally aspirated FB16, the only part the two engines share is the crankshaft. As fitted to the Levorg, the FB16 DIT was able to achieve fuel economy of 16.0 km/L (38 mpg‑US) on the JC08 cycle. [9]
The prior EJ20 used an oversquare 92 mm × 75 mm (3.62 in × 2.95 in) bore and stroke for a 1,994 cc (2.0 L) swept displacement; in comparison, the FB20 features an undersquare bore and stroke for a slightly larger displacement.
All FB20 variants:
The existing FB20B was modified by reducing internal friction for the hybrid drivetrain, which incorporates an electric motor in the Lineartronic CVT. The high-voltage traction battery is installed below the cargo area for better weight balance. [11] Combined system power is stated to be 160 hp (119 kW). [12] Output of the gasoline engine is comparable to that of the non-hybrid FB20B. [13]
Used in the fifth generation Impreza sedan and hatchback; compared to the FB20B, the FB20D adds direct injection, providing a slight increase in power and efficiency. [16] [17]
The 2019 Crosstrek is available with a plug-in hybrid system sourced from Toyota. [20] The new hybrid drivetrain uses two motor-generator units; the traction motor (MG2) and battery are significantly larger compared to the previous XV Crosstrek Hybrid, and the vehicle is capable of moving under electric power alone for a limited distance. MG2 is used under parallel hybrid operation as well. MG1 is used as the starter motor and charges the battery for series hybrid operation. The direct-injection FB20V in the revised hybrid is detuned compared to the conventional FB20D. [21]
The direct-injection FB20D was also used in a mild parallel hybrid configuration similar to the FB20X. The mild hybrid drivetrain was fitted to selected trims for models sold in Japan (Forester, July 2018 and XV, October 2018), [24] Europe (same models, starting in 2019), [25] and Australia (same models, starting in 2020). [26]
Compared to the previous EJ25, which had a displacement of 2,457 cc (2.5 L) from an oversquare 99.5 mm × 79 mm (3.92 in × 3.11 in) bore and stroke, the FB25 has slightly larger displacement on a less oversquare bore and stroke. [4]
All FB25 variants:
The 2019 model year Subaru Forester was introduced at the 2018 New York International Auto Show with a revised version of the FB25 engine featuring direct injection, resulting in a slight boost in power and fuel economy. [31] The seventh-generation 2020 model year Legacy and Outback also adopted the revised direct-injection FB25D as its base engine. [32] [33]
The Subaru Forester is a compact crossover SUV that has been manufactured by Subaru since 1997. The first generation was built on the platform of the Impreza in the style of a taller station wagon, a style that continued to the second generation, while the third-generation model onwards moved towards a crossover SUV design. A performance model was available for the second-generation Forester in Japan as the Forester STi.
The Subaru Impreza is a compact car that has been manufactured by the Japanese automaker Subaru since 1992. It was introduced as a replacement for the Leone, with the predecessor's EA series engines replaced by the new EJ series. It is now in its sixth generation.
The QR family of inline-four piston engines by Nissan were introduced in 2000 and range from 2.0 to 2.5 L in displacement. These motors are aluminum, dual overhead camshaft (DOHC), four-valve designs with variable valve timing and optional direct injection. The engine shares much of its architecture with the YD diesel engine.
The Mitsubishi 4G9 engine is a series of straight-4 automobile engines produced by Mitsubishi Motors. All are 16-valve, and use both single- and double- overhead camshaft heads. Some feature MIVEC variable valve timing, and it was the first modern gasoline direct injection engine upon its introduction in August 1996.
The E-series was a line of inline four-cylinder automobile engines designed and built by Honda for use in their cars in the 1970s and 1980s. These engines were notable for the use of CVCC technology, introduced in the ED1 engine in the 1975 Civic, which met 1970s emissions standards without using a catalytic converter.
The Toyota AZ engine family is a straight-4 piston engine series. The AZ series uses an aluminium engine block with cast iron cylinder liners and aluminium DOHC cylinder head. The engine series features many advanced technologies including slant-squish combustion chambers, offset cylinder and crank centers, and the VVT-i continuously variable intake valve timing system. The aluminium engine measures 626 mm (24.6 in) long, 608 mm (23.9 in) wide, and 681 mm (26.8 in) tall.
The Hyundai Theta is a gasoline four-cylinder automobile engine family. The third all-aluminum engine of Hyundai Motor Company debuted in the fourth-generation Hyundai Sonata sedan, which was unveiled in August 2004 in South Korea. Hyundai Motor Manufacturing Alabama (HMMA) built a Theta II engine shop on the grounds of their Montgomery, Alabama automobile factory.
The Prince G-series engine was the company's only straight-four and straight-six engines which began production in 1955. A number of variations were made, with both OHV and OHC heads. A diesel four-cylinder with 1.9 L (1,862 cc) was also built, called the D-6. The G series was used in the Skyline, the Laurel, and the Gloria from the 1950s to the early 1970s.
The Honda D series inline-four cylinder engine is used in a variety of compact models, most commonly the Honda Civic, CRX, Logo, Stream, and first-generation Integra. Engine displacement ranges between 1.2 and 1.7 liters. The D Series engine is either SOHC or DOHC, and might include VTEC variable valve lift. Power ranges from 66 PS (49 kW) in the Logo to 130 PS (96 kW) in the Civic Si. D-series production commenced in 1984 and ended in 2005. D-series engine technology culminated with production of the D15B 3-stage VTEC (D15Z7) which was available in markets outside of the United States. Earlier versions of this engine also used a single port fuel injection system Honda called PGM-CARB, signifying the carburetor was computer controlled.
The Honda R engine is an inline-four engine launched in 2006 for the Honda Civic (non-Si). It is fuel injected, has an aluminum-alloy cylinder block and cylinder head, is a SOHC 16-valve design and utilizes Honda's i-VTEC system. The R series engine has a compression ratio of 10.5:1, features a "drive by wire" throttle system which is computer controlled to reduce pumping losses and create a smooth torque curve.
The Subaru EJ engine is a series of four-stroke automotive engines manufactured by Subaru. They were introduced in 1989, intended to succeed the previous Subaru EA engine. The EJ series was the mainstay of Subaru's engine line, with all engines of this series being 16-valve horizontal flat-fours, with configurations available for single, or double-overhead camshaft arrangements. Naturally aspirated and turbocharged versions are available, ranging from 96 to 310 hp. These engines are commonly used in light aircraft, kit cars and engine swaps into air-cooled Volkswagens, and are also popular as a swap into copy wasserboxer engined Volkswagen T3/Vanagon. Primary engineering on the EJ series was done by Masayuki Kodama, Takemasa Yamada and Shuji Sawafuji of Fuji Heavy Industries, Subaru's parent company.
The Toyota UR engine family is a 32-valve dual overhead camshaft V8 piston engine series which was first introduced in 2006, as the UZ series it replaced began phasing out. Production started with the 1UR-FSE engine with D-4S direct injection for the 2007 Lexus LS. The series launched with a die-cast aluminum engine block, aluminum cylinder heads and magnesium cylinder head covers. All UR engines feature variable valve timing for both intake and exhaust cams or Dual VVT-i. Timing chains are used to drive the camshafts. The UR engine has been produced in 4.6, 5.0, and 5.7-liter displacement versions.
The N series is Honda's first automotive diesel engine, an inline-four for medium-sized vehicles. It uses common rail direct injection, which Honda brands as i-CTDi. The most notable feature is the aluminium block, which uses proprietary technology in the manufacturing process to provide light weight and high rigidity. Roller chains drive two overhead camshafts. A variable-geometry turbocharger and intercooler are used.
The E0 series is a three-cylinder gasoline engine developed and manufactured by Honda, with a total displacement of 656 cc. The engine is intended for kei car applications. The E05A and E07A were partially replaced by the Honda P engine but as of 2020 the E07Z engine still saw use in the Acty truck.
The Mercedes–Benz M276 engine is a direct injected, gasoline automotive piston V6 engine.
The Hyundai Nu engine was introduced in the 2011 Hyundai Elantra to replace the previous Beta engines. It was designed to fill the gap between the new Gamma 1.6L and the 2.0L Theta II.
The Subaru FA engine is a gasoline boxer-4 engine used in Subaru and Toyota automobiles. It is a derivative of the FB engine, with efforts to reduce weight while maintaining durability as the main design goals. Although the FA and FB engines share a common platform, the FA shares very little in dedicated parts with the FB engine, with a different block, head, connecting rods, and pistons.
The Subaru Crosstrek is a subcompact crossover SUV produced by Subaru since 2012. It is a successor to the Outback Sport in the United States and Canada, and the Impreza XV globally. Like the Outback Sport, the Crosstrek is a lifted Impreza hatchback with minor differences, though with a more substantial lift than the Outback Sport.
The Subaru CB engine is a gasoline boxer-4 engine used in Subaru automobiles. It is the fourth generation of Subaru boxer engines, following the first, second, and third generations.
(Japanese : Subaru FB engine )