Morris Cowley

Last updated

Morris Cowley was a name given to various cars produced by Morris from 1915 to 1958.

Contents

Morris Cowley Bullnose (1915)

Morris Cowley
Continental Cowley
ANZAC Day Parade 2013 in Melbourne - 8679112665.jpg
Van (top removed) manufactured November 1916
Overview
Manufacturer W R M Motors Limited
Production19151920
1450 approx [1]
Assembly Cowley, Oxford
Designer W R Morris & Hans Landstad [1]
Body and chassis
Class midsize car
Body style two-seater, four-seater,
coupé, cabriolet [1] and delivery van
Related Morris Oxford bullnose
Powertrain
Engine 1495 cc
Continental Red Seal Type U
Transmission dry 2-plate clutch,
3-speed gearbox
(in cast aluminium housing),
universal joint in a housing by the gearbox,
propellor shaft enclosed by torque tube,
rear axle: ¾ floating single piece banjo casing, spiral bevel final drive [1]
Dimensions
Wheelbase 8' 6" 102 in (2,590.8 mm)
Track 4' 0" 48 in (1,219.2 mm)
Chronology
SuccessorMorris Cowley (1919 model)

The Continental Cowley, shown to the press in April 1915, was a larger engined (1495 cc against 1018 cc), longer, wider and better-equipped version of the first Morris Oxford with the same "Bullnose" radiator; in addition it could carry a four-passenger body. To reduce the price, many components were bought from United States suppliers. The 1495 cc, side-valve, four-cylinder engine was made by Continental Motor Manufacturing Company of Detroit, and the clutch and three-speed gearbox by Detroit Gear & Machine Co. Back axle, front axle and steering gear also came from the USA. Supply of these components was badly affected by the First World War. The suspension used semi-elliptic leaf springs at the front and three-quarter-elliptics at the rear. [1]

The central position of the handbrake and ball-change gear lever revealed the gearbox's US origin. It also made for easy entry through the driver's door and no cold steel up a driver's leg. The petrol tank was in the scuttle, and its filler was above the gear lever in the centre of the dashboard. [1]

The US-made back axle was the first helically cut drive in a quantity-produced British car. [1]

Electric lighting was standard. It was the first Morris car to be sold like that. The six-volt Lucas lamps were a set of five, powered by a belt-driven dynamo fixed to the engine by its cylinder head studs. The cost of these few electrical components was equivalent to 59% of the cost of the imported engine. [1] The delivery van body was not provided with electric lighting.

More expensive than Oxford

There was no austerity for the Cowley, though it was at first slightly cheaper than the Oxford. There was diamond-patterned buttoned upholstery in real leather set off by mahogany cappings, and a proper door for the driver. The mudguards were black and the standard body colour was a chocolate brown. The Cowley did not become a stripped-down Oxford until 1919. [1]

McKenna duties

Although first shown to the press in April 1915, the new car was not generally available until late summer that year, just when the government suddenly imposed the McKenna duties. A tax of 33% was imposed on imported "luxury" goods, but demand for the Cowleys seemed to ignore the price rises. [1]

Continental engined Cowleys191519161917191819191920
cars produced1616841251982811

source [1]

The last Continental Cowley was assembled in 1920, finishing the stock of original engines. Three thousand engines were despatched to Morris but more than half were lost by enemy action while crossing the Atlantic, leaving around 1,500 sets of certain chassis components unsold. [1] More recent research suggests that there may have been only one shipment of about 150 lost through enemy action, and orders for more shipments were cancelled.

Designed for mass production

Excellent American automobile engineering and production techniques made the first Cowley a great success. The cars were the right design for quantity production when Morris entered quantity production in the 1920s and their high quality engineering created a reputation for utter reliability and resistance to the most shocking abuse. [1]

Bullnose and Flatnose engines U.S. and Coventry made

Continental
Red Seal
Type U
1495 / 1557
Overview
Manufacturer Continental Motor Manufacturing Company [1]
Muskegon and Detroit USA
Production1915
Layout
Configuration straight-4 cast en bloc [1]
Displacement nominal 1.495 L (91.2 cu in) [1]
actual 1.557 L (95.0 cu in)
Cylinder bore nominal 69 mm (2.7 in) [1]
actual 69.8 mm (2.75 in)
Piston stroke nominal 100 mm (3.9 in) [1]
actual 101.6 mm (4.00 in)
Cylinder block materialcast-iron
3-bearing crankshaft
pistons: cast-iron
crankshaft: Desaxé, white metal bearings in phosphor bronze shells, sump cast aluminium [1]
Cylinder head materialcast-iron
detachable; fitted with priming taps; plain copper gasket [1]
Valvetrain side valve L-head, helical timing gears [1]
Combustion
Fuel systemcarburettor: Zenith gravity fed horizontal [1]
magneto:
  • American Bosch type NU 4
  • Dixie type 40 A
  • Thomson-Bennett type AD4C [1]
Fuel typepetrol
Oil system main bearings: pressure lubricated by plunger pump,
pressure test by special tap.
big ends: splash.
if not first, one of the first British cars with a dipstick [1]
Cooling system water thermosyphon,
fan assisted
radiator by Doherty Motor Components or Randle, both of Coventry [1]
Output
Power output not published
RAC (tax) rating 11.9hp [1]
actual RAC (tax) rating 12.08hp
Chronology
SuccessorHotchkiss
Hotchkiss
later
Morris
1548
Overview
Manufacturer Hotchkiss & Cie. Gosford Street Coventry until May 1923, works thereafter under the ownership of Morris Engines Limited [1]
Production1919 to 1926
Layout
Configuration straight-4 cast en bloc with upper crankcase [1]
Displacement 1.548 L (94.5 cu in) [1]
Cylinder bore 69.5 mm (2.74 in) [1]
Piston stroke 102 mm (4.0 in) [1]
Cylinder block materialcast-iron
3-bearing crankshaft
pistons: cast-iron
crankshaft: steel stamping, bronze backed white metal bearings, sump cast aluminium [1]
Cylinder head materialcast-iron detachable
copper asbestos sandwich gasket [1]
Valvetrain side valve L-head, helical timing gears, camshaft in two plain bearings operating valves by mushroom head tappets, single valve springs [1]
Combustion
Fuel systemcarburettor:
  • 1919-1921 Zenith
  • 1922 S.U.
  • 1923-1926 Smith (various)

exhaust: 3-port

  • 4-port from February 1922

magneto: helical bevel drive

  • 1919 Thomson-Bennett G4*
  • 1920 B T-H
  • 1921-23 Lucas E4 (B T-H magdyno if no self starter)
  • 1924-26 Lucas GA4 [1]
Fuel typepetrol
Oil system main bearings and camshaft gear: pressure lubricated by plunger pump from camshaft
big ends: splash [1]
Cooling system water thermosyphon,
fan assisted
radiator 1919 by Randle, thereafter by Osberton [1]
Output
Power output not published
RAC (tax) rating 11.9hp [1]
Chronology
PredecessorContinental Red Seal
Morris
1802
Overview
Manufacturer Morris Engines Limited
Gosford Street Coventry [1]
Production1923–1926
Layout
Configuration straight-4 cast en bloc with upper crankcase [1]
Displacement 1.802 L (110.0 cu in) [1]
Cylinder bore 75 mm (3.0 in) [1]
Piston stroke 102 mm (4.0 in) [1]
Cylinder block materialcast-iron
3-bearing crankshaft
pistons: cast-iron
crankshaft: steel stamping, bronze backed white metal bearings, sump cast aluminium [1]
Cylinder head materialcast-iron detachable
copper asbestos sandwich gasket [1]
Valvetrain side valve L-head, helical timing gears, camshaft in two plain bearings operating valves by mushroom head tappets, single valve springs [1]
Combustion
Fuel systemcarburettor: Smith (various)
exhaust: 4-port
magneto: helical bevel drive
  • 1923 Lucas E4 (B T-H magdyno if no self starter)
  • 1924-26 Lucas GA4 [1]
Fuel typepetrol
Oil system main bearings and camshaft gear: pressure lubricated by plunger pump from camshaft
big ends: splash [1]
Cooling system water thermosyphon,
fan assisted
radiator: Osberton [1]
Output
Power output not published
RAC (tax) rating 13.9hp [1]
Chronology
PredecessorMorris 1548 cc

Morris Cowley Bullnose (1919)

Morris Cowley
Morris Cowley Bullnose 1926.jpg
Two-seater first registered 30 June 1926
Overview
Manufacturer Morris
Production19191926
150,000 made (including Oxford model) [2]
Body and chassis
Related Morris Oxford bullnose
Powertrain
Engine 1548 and 1802 cc side-valve Straight-4
Dimensions
Wheelbase 102 inches (2.59 m) [3]
108 inches (2.74 m) from 1925 [3]
Chronology
Predecessor Morris Cowley 1915
Successor Morris Cowley (1926–1931)

The updated Cowley for 1919 had an engine made by the British branch of the French Hotchkiss company, which was essentially a copy of the early Continental unit which was no longer being made. It was the basic model of the Morris two-car range of the time with the Oxford, which used the same 1.5L 26 bhp engine until 1923, having leather upholstery and upgraded lighting as the de-luxe version.

Morris acquired the British interests of Hotchkiss in 1923 and renamed them Morris engines branch.

Morris Cowley Flatnose (1926–1931)

Morris Cowley
1927 Morris Cowley 6979892586.jpg
Two-seater first registered 2 May 1927
Overview
Manufacturer Morris
Production19261931
201,692 made. [4]
Body and chassis
Body style 2 and 4 seat tourer, coupé, 4-door saloon, folding head saloon (1930).
Related Morris Oxford flatnose
Powertrain
Engine 1548 cc side-valve Straight-4
Dimensions
Wheelbase 102 inches (2560 mm) [3]
Length150 inches (3810 mm) [3]
Width58.5 inches (1486 mm) [3]
Chronology
Predecessor Morris Cowley (1919)
Successor Morris Cowley (1931)

The Bullnose radiator was replaced by a more conventional flat radiator announced on 11 September 1926 [5] on new cars, now with doors either side and a longer list of accessories supplied as standard. All steel bodies were coming available. The engines remained the same, but the Cowley unlike the Oxford, retained braking on the rear wheels only as standard, although a front brake system was available at extra cost (featured car has this fitted). The chassis was new and the suspension was updated with semi-elliptic leaf springs all round plus Smiths friction-type scissor shock absorbers. The brakes are rod-and-spring-operated, with cams inside the drums to actuate. Interesting to note that the rear brake drums include two sets of shoes, one of which is connected directly to the handbrake. [2]

The chassis was further modified in 1931 to bring it in line with the Morris Major. Wire wheels became an option instead of the solid spoked artillery ones previously fitted. [4]

Morris Cowley (1931)

Morris Cowley
1934 Morris Cowley 11.9 saloon.jpg
1933-34 model Four-door six-light 11.9 hp saloon
first registered 16 May 1934
Overview
Manufacturer Morris
Production19321935
39,074 made. [4]
Body and chassis
Body style
  • 4-door saloon
    fixed or sliding head (sun roof)
  • two seater
  • 2-door Special coupé
  • Traveller's saloon —5th rear door
  • chassis only (for special bodies)
RelatedMorris Oxford and Morris Twelve
Powertrain
Engine 11.9 = 1548 cc or
14/32 = 1802 cc
side-valve Straight-4
Dimensions
Wheelbase 105 inches (2667 mm) [3]
Length155 inches (3937 mm) [3]
Width60.5 inches (1537 mm) [3]
Chronology
Predecessor Morris Cowley (1926–1931)
Successor Morris Twelve

A considerably changed Cowley was announced on 29 August 1931. In common with the rest of the Morris range the coachwork of the now six models of Cowley was redesigned for a more pleasing appearance – with a fashionable "eddy-free" leading edge to the roof of closed cars, petrol tanks located at the rear of the chassis, chrome finish to all bright parts, and Magna-type wire wheels as standard. There was a new chassis frame giving a lower body. Springs had been made longer and more resilient. Bigger brake drums were provided, and the brakes were now actuated hydraulically and supplied by Lockheed. There was a new radiator to match with the large hub wire wheels. The engine's connecting rods were now Duralumin. A sports coupé body was added to the range. Either the 11.9 or 14/32 engine was supplied to order for the same price. [6] There were no more four-seater tourers. [4]

Revised

A revised ("transformed" said the advertising) lower body with a new 11.9 hp engine behind a new, sloping, radiator and still of the same 1548 cc was announced 28 August 1933 along with a four-speed Twin-Top synchromesh gearbox, shorter stronger cruciform chassis, leather upholstery, draught excluders over the gear lever and pedal slots and a battery master switch (in case of fire). Closed cars were given a sun visor. [7] [8] Additional equipment included bumpers front and rear and luggage grid and parcel net

The new radiator for the new engine Morris Cowley 1934 RV 5065 Blue and black.jpg
The new radiator for the new engine

Morris Twelve

From late 1934 this car was badged Morris Twelve Four.

Morris Cowley Six

Morris Cowley Six
1934 Morris Cowley 6 Saloon (4385566456).jpg
Morris Cowley Six six-light saloon 1934
Overview
Manufacturer Morris
Production19341935
15,470 made. [4]
Body and chassis
Body style 4-door saloon, 2 door coupé.
Related Morris Oxford Six
Powertrain
Engine 63.5 x 102mm (same as Ten-Four)
1938 cc side-valve Straight-6
15 hp
36 bhp at 3,400 rpm [7]
Dimensions
Wheelbase 106 inches (2692mm)
Width65.5 inches (1664 mm)
Chronology
Predecessor Morris Major
SuccessorMorris Fifteen-Six

Announced 28 August 1933 the 1934 Cowley Six replaced the Morris Major keeping the same 1938 cc six cylinder, side valve engine but with a new lower chassis. Along with all other Morris cars the Cowley now has a synchromesh four-speed gearbox, dipping headlights, hydraulic shock absorbers, leather upholstery, hydraulic brakes, rear petrol tank, direction indicators, safety glass, battery master switches and automatic ignition. There was a matching smaller 12 hp 1378 cc Morris Ten Six. [7]

Prices:
Badge Wedding car 1 (5171564877).jpg
Badge

The Cowley Six became the Fifteen-Six in 1935. [4]

Morris Cowley MCV (1950–1956)

Morris Cowley MCV
Morris Cowley MCV.jpg
Overview
Manufacturer Morris/BMC
Also calledMorris ½ Ton Coupe Utility (Australia) [9]
Production1950–1956
Body and chassis
Body style 2-door van
2-door pick-up
2-door chassis-cab
Related Morris Oxford MO
Chronology
Successor Morris ½-ton Series III

Introduced in 1950, the Cowley MCV commercial vehicle range was based on the Morris Oxford MO. [10] It was offered in van, pick-up and chassis-cab versions. [10] The 10cwt MCV van was a replacement for the Morris Y-series van and had a capacity of 120 cu ft (3,400 L) or 138 cu ft (3,900 L) without the passenger seat. [10]

1953 Morris Cowley MCV pick-up, pictured in Australia, where it was marketed as the Morris 1/2 Ton Coupe Utility Morris Cowley Utility 1953.JPG
1953 Morris Cowley MCV pick-up, pictured in Australia, where it was marketed as the Morris ½ Ton Coupe Utility

1954 Morris Cowley

Morris Cowley
Overview
Manufacturer Morris/BMC
Production19541959
Body and chassis
Class midsize car
Body style 4-door saloon
Related Morris Oxford series III
Dimensions
Wheelbase 97 in (2,464 mm) [11]
Length169 in (4,293 mm) [11]
Width65 in (1,651 mm) [11]
Height63 in (1,600 mm) [11]
Kerb weight 2352 pounds
Chronology
Predecessor Morris Twelve
Successor Morris 1800

The 1954 Morris Cowley was a four-cylinder midsize car produced from 1954 to 1959. It was essentially a budget version of the Morris Oxford series III with less chrome, no heater, fixed front quarter lights and a simplified dashboard.

Morris Cowley 1200

Morris Cowley 1200
Morris Cowley 1956.jpg
Overview
Production19541956 [3]
17,413 produced
Body and chassis
Related Morris Oxford series II
Powertrain
Engine 1.2 L B-Series Straight-4 ohv

This new Morris Cowley was launched on 14 July 1954 [12] as a smaller engined more simply furnished supplement to the Morris Oxford series II launched two months earlier. [13] The engine, the 1.2 L (1200 cc) B-Series unit was a new design also used in the Austin A40 and Nash Metropolitan. Its power output was 42 bhp at 4,500 rpm. [13]

The monocoque body shell was that of the four door Morris Oxford series II, the Cowley also sharing its torsion beam front suspension and live rear axle but with smaller 8 in (203 mm) brake drums on early models. Some of the Oxford's exterior chrome has been removed to simplify the appearance and some has been replaced with stainless steel. Plastic-covered felt has been used in place of interior carpet. Quarter lights are fixed on the Cowley though the main windows wind down in the usual way. [13] Steering was of the conventional rack and pinion type. [14] The car had a top speed of just over 70 miles per hour (110 km/h).

The British Motor magazine tested a Cowley saloon in 1955 recording a top speed of 71.9 mph (115.7 km/h) and acceleration from 0–60 mph (97 km/h) in 31.5 seconds and a fuel consumption of 28.0 miles per imperial gallon (10.1 L/100 km; 23.3 mpgUS). The test car cost £702 including taxes. [11]

Morris Cowley 1500

Morris Cowley 1500
Overview
Production19561958
4623 produced
Body and chassis
Related Morris Oxford series III
Powertrain
Engine 1.5 L B-Series Straight-4

On 12 October 1956 it was announced that the 1200 engine had been replaced by the Oxford's larger 1.5 L (1489 cc) engine and the exterior styling amended in line with the Morris Oxford Series III. [15]

½-ton series III

Morris ½-ton series III
Morris 1/2 -ton Series III Van of 1959.jpg
½-ton series III Van 1959
Overview
Manufacturer British Motor Corporation
Production1956–1962
AssemblyUnited Kingdom
Body and chassis
Body style 2-door van [16]
2-door pick-up
2-door chassis-cab
Layout FR layout
Chronology
Predecessor Morris Cowley MCV

The Morris ½-ton series III was a commercial vehicle variant of the Morris Oxford series III. [17] It was introduced in 1956, replacing the Morris Cowley MCV and was offered in van, pick-up and chassis-cab body styles. [17] The series III was replaced by a Morris version of the Austin A55 van in 1962. [17] The commercials never had the series III bonnet and headlamp cowls. Again the Cowley name never appeared on the vehicles and it is very likely that no more left the factory after 1960. A gown van based on this vehicle appears in the Peter Sellars film Wrong Arm of the Law.[ citation needed ]

See also

Related Research Articles

<span class="mw-page-title-main">Morris Oxford</span> Motor vehicle

Morris Oxford is a series of motor car models produced by Morris of the United Kingdom, from the 1913 'bullnose' Oxford to the Farina Oxfords V and VI.

<span class="mw-page-title-main">Morris Minor (1928)</span> Motor vehicle

The Morris Minor is a small 4-seater car with an 850 cc engine manufactured by Morris Motors Limited from 1928 until 1934. The name was resurrected for another newer car for the same market in 1948.

<span class="mw-page-title-main">Austin 10</span> Motor vehicle

The Austin Ten is a small car that was produced by Austin. It was launched on 19 April 1932 and was Austin's best-selling car in the 1930s and continued in production, with upgrades, until 1947. It fitted in between their "baby" Austin Seven which had been introduced in 1922 and their various Austin Twelves which had been updated in January 1931.

<span class="mw-page-title-main">Morris Commercial Cars</span> British automotive manufacturer

Morris Commercial Cars Limited is a British manufacturer of commercial vehicles formed by William Morris, founder of Morris Motors Limited, to continue the business of E G Wrigley and Company which he purchased as of 1 January 1924.

<span class="mw-page-title-main">Singer Bantam</span> Motor vehicle

The Singer Bantam is a car which was produced by Singer from 1936 to 1939. It was the first model from Singer to have an all-steel body, by Pressed Steel Company. It was offered as a new economy model at the 1935 Motor Show in London, replacing the earlier Singer Nine series.

The Rover 8 was a small single-cylinder 8 hp 1327 cc car made by the British Rover car company. It was Rover's first production car. It was remarkable for being supported by a backbone chassis rather than a conventional ladder frame. The first model was manufactured from 1904 to 1912. A Daimler-Knight sleeve valve engine option was available on the original model in 1911 and 1912.

<span class="mw-page-title-main">Rover 10</span> Motor vehicle

The Rover 10 was a small family car from the British Rover car company produced between 1927 and 1947.

<span class="mw-page-title-main">Wolseley Hornet six</span> Motor vehicle

The Wolseley Hornet is a six-cylinder twelve fiscal horsepower lightweight automobile which was offered as a saloon car, coupé and open two-seater as well as the usual rolling chassis for bespoke coachwork. Produced by Wolseley Motors Limited from 1930 until 1936, the Hornet was unveiled to the public at the end of April 1930. Wolseley had been bought from the receivers by William Morris in 1927.

<span class="mw-page-title-main">Morris Ten</span> Motor vehicle

The Morris Ten is a medium-sized car introduced for 1933 as the company's offering in the important 10 hp sector of the British market. It continued through a series of variants until October 1948 when along with Morris's Twelve and Fourteen it was replaced by the 13.5 hp Morris Oxford MO.

<span class="mw-page-title-main">Austin 12/6</span> Motor vehicle

The Austin Light Twelve-Six is a 14 tax horsepower car with a 1496 cc engine that was introduced by Austin in January 1931. It was named by Austin Light Twelve to separate it from the well-established Austin Twelve. The general public then dubbed the original Twelve Heavy Twelve but Austin never used that name. The Light Twelve-Six remained in production until 1936.

<span class="mw-page-title-main">Rover 12</span> Name given to several medium-sized family cars from the British Rover car company

The Rover 12 was a name given to several medium-sized family cars from the British Rover car company between 1905 and 1948.

<span class="mw-page-title-main">Standard Flying Fourteen</span> Motor vehicle

The Standard Flying Fourteen is an automobile produced by the British Standard Motor Company from 1936 to 1940 and announced in October 1936. The other Flying Standard models had been announced twelve months earlier. A standard is a flag and the reference to flying standards is to flying flags as well as to the advertised abilities of the cars.

<span class="mw-page-title-main">Lanchester Ten</span> Motor vehicle

The Lanchester Ten and Lanchester Eleven were sold by The Lanchester Motor Company Limited from the Ten's announcement in September 1932 until 1951. Quite different from previous Lanchesters, the Ten was the second of Lanchester's new owner's new Daimler-linked Lanchester range. The names Ten and Eleven referred to the engine's rating for the annual tax and did not relate to the engine's power output.

<span class="mw-page-title-main">Lanchester Fourteen</span> Motor vehicle

The Lanchester Fourteen Roadrider is a six-cylinder automobile introduced by the Lanchester Motor Company in the beginning of September 1936. It was named "Roadrider" for its special suspension features, and billed as the lowest-priced six-cylinder Lanchester ever offered. This car replaced the previous 12 hp Light Six model with a larger six-cylinder engine again in the Lanchester Eleven chassis and body.

<span class="mw-page-title-main">Morris Twelve</span> Motor vehicle

Morris Twelve is a model of Morris car introduced without fanfare in the autumn of 1934 as little more than a larger engined Morris Ten Four for which just another £5 was asked. The chassis and body were of the slow-selling longer wheelbase Ten Six. The engine though awarded a tax rating of 11.98 hp had a cubic capacity of 1548cc compared with Morris's 1292cc (10 hp) Ten Four and 1378cc (12.09 hp) Ten Six.

<span class="mw-page-title-main">Morris Six (1928)</span> Motor vehicle

The Morris Six is a 2½-litre six-cylinder car with an overhead camshaft for its overhead valves first displayed at the October 1927 Motor Show at Olympia as Morris Light Six. When he bought Wolseley in February 1927 W R Morris gave Wolseley employees his reason. It was that he wanted to make good 6-cylinder cars and Wolseley could do that. He said he particularly admired their 2-litre Wolseley 16/45.

<span class="mw-page-title-main">Morris Oxford Series II</span> Motor vehicle

Morris Oxford is a series of motor car models produced by Morris Motors of the United Kingdom, from the 1913 bullnose Oxford to the Farina Oxfords V and VI.

Morris Oxford is a series of motor car models produced by Morris Motors of the United Kingdom, from the 1913 bullnose Oxford to the Farina Oxfords V and VI.

<span class="mw-page-title-main">Morris Oxford Six</span> Touring car manufactured by Morris Motors Ltd.

The Morris Oxford Six is a motor car produced by Morris of the United Kingdom from 1921 until 1926, and again from 1929 until 1935. Initially produced as a straight-six engined version of the Morris Oxford bullnose, the original Oxford Six was the first car produced by Morris with a six-cylinder engine, but proved to be unreliable. The versions produced from 1929 onwards were introduced as a replacement for the Morris Oxford 16/40.

<span class="mw-page-title-main">Morris Oxford bullnose</span> Motor vehicle

The "bullnose" Morris Oxford is a series of motor car models produced by British manufacturer Morris from 1913 to 1926. It was named by W R Morris after the city in which he grew up and which his cars were to industrialise.

References

  1. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 L P Jarman and R I Barraclough, The Bullnose and Flatnose Morris, David & Charles, Newton Abbott, UK 1976
  2. 1 2 Baldwin, N. (1994). A-Z of cars of the 1920s. UK: Bay View Books. ISBN   1-870979-53-2.
  3. 1 2 3 4 5 6 7 8 9 Culshaw; Horrobin (1974). Complete Catalogue of British Cars. London: Macmillan. ISBN   0-333-16689-2.
  4. 1 2 3 4 5 6 Sedgwick, M.; Gillies (1989). A-Z of cars of the 1930s. UK: Bay View Books. ISBN   1-870979-38-9.
  5. Display advertising. Morris Motors (1926) Ltd The Times, Saturday, Sep 11, 1926; pg. 5; Issue 44374.
  6. Cars Of 1932. The Times, Saturday, August 29, 1931, p. 3; Issue 45914
  7. 1 2 3 4 Cars Of 1934. The Times, Monday, Aug 28, 1933; pg. 6; Issue 46534
  8. The Olympia Show. From Our Motoring Correspondent. The Times, Saturday, Oct 14, 1933; pg. 7; Issue 46575
  9. oz coupe front, www.680mo.org.uk Retrieved 26 February 2018
  10. 1 2 3 Morris Cowley MCV, motor-car.net Retrieved 26 February 2018
  11. 1 2 3 4 5 "The Morris Cowley". The Motor . 2 February 1955.
  12. News in Brief. The Times, Thursday, Jul 15, 1954; pg. 5; Issue 52984.
  13. 1 2 3 The Motor, 21 July 1954
  14. "When the worm turns...or the pinion rotates...". Practical Motorist. 7. (nbr 84): 1278–1279. August 1961.
  15. Higher Speed Of Nuffield Cars. The Times, Friday, Oct 12, 1956; pg. 7; Issue 53660
  16. Morris ½ Ton Van & Pick-Up Series III brochure, www.brochuremuseum.nl Retrieved on 8 September 2018
  17. 1 2 3 Commercials : Car derived vans/pick-ups, www.aronline.co.uk Retrieved on 23 April 2012