M60-2000

Last updated
M60-2000
Type Main battle tank
Place of origin United States
Production history
Manufacturer General Dynamics
Produced2001
No. built1 ( 120S prototype only)
Specifications
Mass56.52 tonnes (62.30 short tons; 55.63 long tons)
Length9.55 m (31 ft 4 in) (gun forward)
Width3.77 m (12 ft 5 in)
Height2.89 m (9 ft 6 in)
Crew4 (commander, gunner, loader, driver)
Armor 120S Prototype
Turret: Burlington composite armor [1]
Hull Upper Glacis: 4.29 in (109 mm) at 65°
10.15 in (258 mm) LoS [2]
Main
armament
120 mm M256 smoothbore cannon
Secondary
armament
2 x M240C 7.62 (0.30 in) MGs and 1 x M2HB 12.7 mm (0.50 in) MG
Engine Continental V-12 750 hp (560 kW) air-cooled, AVDS-1790-2 diesel engine and CD-850-6 cross drive transmission (prototype)
750bhp
Suspension Torsion bar suspension
Operational
range
443 km (275 mi)
Maximum speed 51.6 km/h (33 mph)

The General Dynamics Land Systems (GDLS) M60-2000 or 120S was an upgrade of the M60 tank. The development of the M60-2000 was initiated primarily due to the large number of M60 main battle tanks in service with many Middle Eastern nations unable to afford a sufficient force of more modern main battle tanks. The upgrade was marketed at those M60 users with the industrial capability to convert the tanks themselves. The M60-2000/120S was a GDLS supplied conversion kit that married the turret of the M1A1 variant of the M1 Abrams to the M60A1 hull of the M60, offering many features of the M1A1 Abrams to existing M60 users at a reduced cost.

Contents

Development

It was first referred to the M60-2000 Program and design work began in late 1999 by General Dynamics Land Systems as a private venture for the export market and was never evaluated for US military service. Later the M60 designation was dropped because of the extensive changes and to highlight this as a new vehicle to potential customers thus changing the name to the 120S Project. The 120 represented the gun, and S according to company marketing stood for Speed and Survivability. Two of the major upgrades this would offer to the M60 series of the vehicle. [3] It is essentially a hybrid vehicle consisting of an M1A1 version of the Abrams tank turret mated to a M60A1 hull. The M60-2000 was test-marketed during 2000 and a number of countries in NATO and the Middle East were briefed on the vehicle. Following customer feedback, detailed engineering work was carried out and in December GDLS decided to build a functional prototype. [4] In August 2001 the company rolled out the fully functional prototype of the 120S tank at their Detroit, Michigan, facility. The prototype was shown at the IDEF Exhibition held in Turkey in October 2001.

Description

During development an upgrade to the M60A3 turret was considered, but the M1A1 turret was used because of its higher level of armor protection and the fact that the 120 mm ammunition is separated in the turret bustle. For the 120S Project the M1A1 turret and M60A1 series chassis were leased from the US Army. The turret is mated to the existing M60 chassis using an adapter ring that allows the use of the M1A1 wire race ring with no turret modifications. It consisted of a functional M1A1 turret, M1 turret gear box, hydraulic pump and an M1A1 slip ring adapter. [4] Many of the subsystems were already well proven and in volume production.

The turret armor is of a composite material and lacks the protective depleted uranium (DU) meshing found in the M1A1HA (Heavy Armor) variant of the Abrams tank. The hull armor is conventional hardened steel. It was planned that armor packages for the production vehicles would be customized for each customer. Available options included additional STANAG Level 6 armor plating for the hull frontal arc to the third road wheel, slat/cage armor skirting for the turret, steel or composite armored side skirts, spall liners and reactive armor packages. [5]

The M60A1 chassis was modified with the enhanced torsion bar system of the M1 series tank to take account of the additional weight of the M1A1 turret as well as the additional armor that would have been fitted to production vehicles. An optional offering was to replace the torsion bar suspension with hydropneumatic units for improved cross-country ride. The prototype of the 120S retains the standard M60 series power pack consisting of a Continental V-12 750 hp (560 kW) air-cooled, AVDS-1790-2 diesel engine with a CD-850-6 cross drive transmission, with a range of 275 miles (443 kilometres). It was envisioned that production vehicles would have the more powerful General Dynamics Land Systems AVDS-1790-9 diesel developing 1,200 hp (890 kW) and Allison X-1100-5 series automatic transmission extending operational range to over 300 miles (480 km) but other power pack combinations were also offered as well as road wheels and drive sprocket being replaced by M1A1 components and the Abrams T158 lightweight track if desired. The upper part of the suspension of the prototype is fitted with mock ballistic side skirts and new sponsions. It has a crew of 4, the commander, loader and gunner are positioned in the turret and the driver in the front of the hull.

Weapons systems

The main weapon is a fully stabilized M256 120 mm smoothbore gun with a thermal sleeve as used on the M1A1 version of the Abrams tank and carries 36 rounds in the turret bustle. The ammunition is stored in the turret bustle with blow-out panels for better survivability. Production versions planned to have additional round storage in safe boxes on the hull floor. Secondary armament consists of two M240C 7.62 mm machine guns. One of them is mounted coaxially on the right of the main gun, another is mounted over the loader's hatch. There is also a roof-mounted M2HB 12.7 mm machine gun, mounted over commander's hatch. The turret is fitted with two six-barreled, electronically fired M250 smoke grenade launchers, one on each side of the main gun. The smoke grenades contain a phosphor compound that masks thermal signature of the vehicle to the enemy. A Vehicle Engine Exhaust Smoke System (VEESS) can also be laid from the engine operated system to visually obscure the area around the vehicle. [6]

The electronics package used components designed by Hughes consisting of a 240X4 Forward Looking Infrared Red (FLIR) day/FLIR stabilized sight with an eye-safe laser range-finder, a Thermal Imaging System (TIS), an onboard digital fire control computer and data bus providing a similar capability as the M1 Abrams Mark 1 Advanced Fire Control System. Production vehicles would also have a BITE (Built In Test Equipment) package. [5]

Results

The 120S was initially aimed at the Turkish Land Forces Command (TLFC) M60 upgrade requirement but this competition was subsequently won by Israel Military Industries with their Sabra II upgrade. The Egyptian Army was considering this offer until it was finally rejected in favor of a licensed contract to build M1s in Egypt. [7] Only one prototype was made. As of early 2009 there were no sales of the 120S tank and was no longer mentioned in General Dynamics marketing literature. The prototype was disassembled and the hull and turret returned to the US Army in 2003. [5]

See also

Related Research Articles

<span class="mw-page-title-main">M1 Abrams</span> American main battle tank

The M1 Abrams is a third-generation American main battle tank designed by Chrysler Defense and named for General Creighton Abrams. Conceived for modern armored ground warfare, it is one of the heaviest tanks in service at nearly 73.6 short tons. It introduced several modern technologies to the United States armored forces, including a multifuel turbine engine, sophisticated Chobham composite armor, a computer fire control system, separate ammunition storage in a blowout compartment, and NBC protection for crew safety. Initial models of the M1 were armed with a 105 mm M68 gun, while later variants feature a license-produced Rheinmetall 120 mm L/44 designated M256.

<span class="mw-page-title-main">M48 Patton</span> Cold War-era American main battle tank

The M48 Patton is an American first-generation main battle tank (MBT) introduced in February 1952, being designated as the 90mm Gun Tank: M48. It was designed as a replacement for the M26 Pershing, M4 Sherman, M46 and M47 Patton tanks, and was the main battle tank of the U.S. Army and U.S. Marine Corps in the Vietnam War. Nearly 12,000 M48s were built, mainly by Chrysler and American Locomotive Company, from 1952 to 1961. The M48 Patton was the first U.S. medium gun tank with a four-man crew, featuring a centerline driver's compartment and no bow machine gunner. As with nearly all new armored vehicles it had a wide variety of suspension systems, cupola styles, power packs, fenders and other details among individual tanks.

<span class="mw-page-title-main">M60 tank</span> American second generation main battle tank

The M60 is an American second-generation main battle tank (MBT). It was officially standardized as the Tank, Combat, Full Tracked: 105-mm Gun, M60 in March 1959. Although developed from the M48 Patton, the M60 tank series was never officially christened as a Patton tank. It has been called a "product-improved descendant" of the Patton tank's design. The design similarities are evident comparing the original version of the M60 and the M48A2. The United States fully committed to the MBT doctrine in 1963, when the Marine Corps retired the last (M103) heavy tank battalion. The M60 tank series became America's primary main battle tank during the Cold War, reaching a production total of 15,000 M60s. Hull production ended in 1983, but 5,400 older models were converted to the M60A3 variant ending in 1990.

<span class="mw-page-title-main">M728 combat engineer vehicle</span> Military engineering vehicle

The M728 Combat Engineer Vehicle (CEV) is a full-tracked vehicle used for breaching, obstacle removal, and pioneering operations. Production commenced in 1965 and ceased in 1987. A total of 312 of all variants of these armored engineer vehicles were produced.

<span class="mw-page-title-main">Magach</span> Series of Israeli Tanks

Magach is the designation of a series of tanks in Israeli service. The tanks are based on the American M48 and M60 tanks. The name continued to be used for all M48/M60 tanks. Magach 1, 2, 3, and 5 are based on M48 series tanks, and Magach 6 and 7 are based on M60 series tanks.

General Dynamics Land Systems (GDLS) is a manufacturer of military vehicles, including tanks and light armored fighting vehicles. The company is based in Sterling Heights, Michigan, and is a subsidiary of General Dynamics.

<span class="mw-page-title-main">K1 tank</span> South Korean main battle tank

The K1, also known as Type 88 by American engineers, is a South Korean main battle tank designed by Chrysler Defense and Hyundai Precision Industry for the Republic of Korea Armed Forces. The vehicle's design was based on technology from Chrysler's M1 Abrams, tailored to meet the ROK's unique requirements. The K1A1 is an up-gunned variant with a 120 mm 44 caliber smoothbore gun, and outfitted with more modern electronics, ballistic computers, fire control systems, and armor. Hyundai Rotem produced 1,511 K1 and K1A1 tanks between 1986 and 2011.

Tank development both evolved considerably from World War II and played a key role during the Cold War (1947–1991). The period pitted the nations of the Eastern Bloc and the North Atlantic Treaty Organization (NATO) against each other.

<span class="mw-page-title-main">M60 AVLB</span> Armored vehicle-launched bridge

The M60 armored vehicle launched bridge (AVLB) is an armored vehicle based on the M60 Patton main battle tank's hull and used for the launching and retrieval of a 60-foot (18 m) scissors-type bridge. The AVLB consists of three major sections: the launcher, the vehicle hull, and the bridge. The M60 AVLB was introduced in 1963. This combat engineer vehicle was developed by the US Army Engineer Research & Development Laboratories under contract with General Dynamics to replace the previous M48 AVLB. It was designed to launch bridge for tanks and other wheeled combat vehicles across trenches and water obstacles in combat conditions. A total of 400 armored bridge launchers and bridges were built. 125 M60 AVLBs of all variants were constructed.

<span class="mw-page-title-main">Bustle rack</span>

A bustle rack is a type of storage bin mounted on combat vehicles, usually on the sides and/or rear of the turret. These racks are used to carry extra gear and supplies for the vehicle in the field, as well as give the crew a place to store their belongings so that they don't take up the already cramped space inside the vehicle.

The Ramses II tank is a heavily modernized T-55 main battle tank designed for and used by the Egyptian Armed Forces. A single T-54 was sent to the United States for upgrading. A primary prototype was sent to Egypt where extensive trials were completed in late 1987. Additional tests were conducted in 1990. Sources are often contradictory on the Ramses II tank service history and number of vehicles built, with some stating that it entered service in relatively small numbers, while according to another source the tank never got past the prototype stage.

<span class="mw-page-title-main">Leopard 2E</span> Spanish main battle tank

The Leopardo 2E or Leopard 2A6E (E stands for España (Spanish for 'Spain')) is a variant of the German Leopard 2 main battle tank (specifically the Leopard 2A6 variant), tailored to the requirements of the Spanish army, which acquired it as part of an armament modernization program named Programa Coraza, or Program Cuirass. The acquisition program for the Leopard 2E began in 1994, five years after the cancellation of the Lince tank program that culminated in an agreement to transfer 108 Leopard 2A4s to the Spanish army in 1998 and started the local production of the Leopard 2E in December 2002. Despite postponement of production owing to the 2003 merger between Santa Bárbara Sistemas and General Dynamics, and continued manufacturing issues between 2006 and 2007, 219 Leopard 2Es have been delivered to the Spanish army.

The M1 Abrams main battle tank has been in service since 1980. Since then, it has gone through dozens of upgrades and been the baseline variant of several vehicles.

<span class="mw-page-title-main">Expeditionary Tank</span> Light tank

The Expeditionary Tank was a light tank developed in the 1980s initially by Teledyne Vehicle Systems. Later joined by General Dynamics Land Systems (GDLS), the companies entered the US Army's Armored Gun System (AGS) competition with the design. Since the tank never entered service, it did not receive an official designation. Alternative names for the Expeditionary Tank include the Teledyne Light Tank and the Slammer.

<span class="mw-page-title-main">Tanks of the United States</span> Evolution of American Tanks

The United States has produced tanks since their inception in World War I, up until the present day. While there were several American experiments in tank design, the first American tanks to see service were copies of French light tanks and a joint heavy tank design with the United Kingdom.

<span class="mw-page-title-main">Tanks of the United States in the Cold War</span>

This article deals with the history and development of American tanks from the end of World War II and during the Cold War.

<span class="mw-page-title-main">CM-11 Brave Tiger</span> Main battle tank

The CM-11 Brave Tiger is a main battle tank (MBT) that was developed by the American General Dynamics and the Republic of China Army Armored Vehicle Development Center. It was introduced to the public on 14 April 1990. The CM-11 is a hybrid M60 chassis fitted with the turret from the older M48 Patton and the fire control system of the M1 Abrams.

M60 tank non US-operators are the non U.S. nations that operate or used the M60 Main Battle Tank. The M60 tank entered service with the U.S. military in 1960 and served until 1991 and as a training aid until 2005. During this time it was the primary tank of the U.S. Army and U.S. Marine Corps.

<span class="mw-page-title-main">M1074 Joint Assault Bridge System</span> Armoured vehicle-launched bridge

The M1074 Joint Assault Bridge System is an American armored military engineering vehicle based on the Abrams M1A1 main battle tank chassis. The M1074 was designed by Leonardo DRS for the U.S. Army and Marine Corps to provide deployable bridge capability for units engaged in military operations.

<span class="mw-page-title-main">M68 tank gun</span> Tank gun

The M68 is an American 105 mm tank gun. It uses British-designed L7 gun tube and cartridges with an American-designed mount, breech assembly and recoil mechanism.

References

  1. ↑ Zaloga & Sarson 1993, p. 6
  2. ↑ Hunnicutt 1984, pp. 439–443
  3. ↑ "Janes' M60-2000".
  4. 1 2 "M60-2000 / 120S Main Battle Tank".
  5. 1 2 3 "120S Main Battle Tank". Military-Today.com. Retrieved 2022-08-20.[ dead link ]
  6. ↑ "M1 Abrams Main Battle Tank".
  7. ↑ "Egypt - Co-production of M1A1 Abrams Tank | Defense Security Cooperation Agency".

Sources

This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.