This article possibly contains original research .(February 2010) |
Many gases have toxic properties, which are often assessed using the LC50 (median lethal concentration) measure. In the United States, many of these gases have been assigned an NFPA 704 health rating of 4 (may be fatal) or 3 (may cause serious or permanent injury), and/or exposure limits (TLV, TWA/PEL, STEL, or REL) determined by the ACGIH professional association. Some, but by no means all, toxic gases are detectable by odor, which can serve as a warning. Among the best known toxic gases are carbon monoxide, chlorine, nitrogen dioxide and phosgene.
Chemical name [3] | Chemical formula | CAS number | NIOSH IDLH (ppm) | OSHA PEL / NIOSH REL / ACGIH TLV [4] | NFPA 704 Ratings | LC50 (ppm) [5] | Odor threshold (ppm) [5] | |
---|---|---|---|---|---|---|---|---|
Health | Special Hazard | |||||||
Arsenic pentafluoride | AsF5 | 7784-36-3 | 5 | NIOSH PEL TWA 0.001 ppm; REL Ceiling 0.0002 ppm (15 min) | 4 | |||
Arsine [4] | AsH3 | 7784-42-1 | 3 | NIOSH REL (C) (15 min): 0.002 mg/m3; OSHA PEL: 0.05 ppm; ACGIH (2006) TWA-TLV 0.05 ppm | 4 | 120 (rat, 10 min) | ||
Bis(trifluoromethyl)peroxide | C2F6O2 | 927-84-4 | 10 | |||||
Boron tribromide [6] | BBr3 | 10294-33-4 | 50 | ACGIH (1990) / PEL Ceiling limit 1 ppm; AEGL-1: 0.33 ppm, AEGL-2: 1.7 ppm, AEGL-3: 5 ppm | 3 | |||
Boron trichloride [7] | BCl3 | 10294-34-5 | 25 | No exposure limits have established; 2500 (TQ) | 4 | 2541 (rat, 1 h) [8] | ||
Boron trifluoride | BF3 | 7637-07-2 | 25 | OSHA, ACGIH (1962) 1 ppm ceiling | 4 | 436 (4 h) [8] | ||
Bromine | Br2 | 7726-95-6 | 3 | OSHA PEL 8-hr TWA: 0.1 ppm; ACGIH (1991) STEL-TLV 0.3 ppm | 3 | OX | 174 (mice) | <0.01 |
Bromine chloride | BrCl | 13863-41-7 | 1500 (TQ) | 3 | OX | |||
Bromomethane | CH3Br | 74-83-9 | 250 | NIOSH PEL 20 ppm | 3 | 302 (Rat, 8 h) [9] | ||
Carbon monoxide | CO | 630-08-0 | 1,200 (moderately toxic) | ACGIH (1989) TWA TLV 25 ppm; NIOSH 35 ppm; NIOSH 200 ppm Ceiling limit | 3 | 4600/5000 [10] | ||
Chlorine | Cl2 | 7782-50-5 | 10 | ACGIH (1986) STEL-TLV 1 ppm | 3 | OX | 433 (10 min), 250 (30 min) | 1 |
Chlorine pentafluoride | ClF5 | 13637-63-3 | AEGL-2: 0.33 ppm, AEGL-3: 2.7 ppm | 194 (Rat) | ||||
Chlorine trifluoride | ClF3 | 7790-91-2 | 12 | ACGIH (1979) Ceiling limit 0.1 ppm | 4 | 95 (Rat, 4 h) | Inadequate odor | |
Chloropicrin [note 1] | CCl3NO2 | 76-06-2 | 2 | ACGIH (1990) TWA-TLV 0.1 ppm | 4 | 9.7 (Mouse, 4 h) | ||
Cyanogen | C2N2 | 460-19-5 | ACGIH (1966) TWA-TLV 10 ppm | 4 | ||||
Cyanogen chloride | CNCl | 506-77-4 | ACGIH (1977) ceiling limit 0.3 ppm | 4 | ||||
Diazomethane | CH2N2 | 334-88-3 | 2 | ACGIH (1970) TWA-TLV 0.2 ppm | 4 | 175 (Cat, 10 min) | ||
Diborane | B2H6 | 19287-45-7 | 15 | ACGIH (1990) TWA-TLV 0.1 ppm | 4 | 40 (Rat, 4 h) | Inadequate odor | |
Dichloroacetylene [note 2] | C2Cl2 | 7572-29-4 | NIOSH REL 0.1 ppm Ceiling | |||||
Dichlorosilane | H2Cl2Si | 4109-96-0 | 2500 (TQ) | 4 | 1785-2092 | |||
Dimethylmercury | HgC2H6 | 593-74-8 | 4 | |||||
Ethylene oxide (anhydrous) | C2H4O | 75-21-8 | 800 | REL TWA <0.1 ppm, 5 ppm Ceiling | 3 | 90 mg/L (fish, 24 h) | ||
Fluorine | F2 | 7782-41-4 | ACGIH (1970) STEL-TLV 2 ppm | 4 | OX | 20 ppb | ||
Formaldehyde (anhydrous) | CH2O | 50-00-0 | 20 | NIOSH REL 0.016 ppm, Ceiling limit 0.1 ppm | 3 | 333 (mouse, 2 h) | ||
Germane | GeH4 | 7782-65-2 | NIOSH REL 0.2 ppm | 4 | 440 (mice 2 h) | |||
Hydrogen azide | HN3 | 7782-79-8 | NIOSH REL: 0.1 ppm Ceiling | 4 | ||||
Hydrogen cyanide | HCN | 74-90-8 | 50 | PEL TWA 10 ppm; REL ST 4.7 ppm | 4 | 503 (Rat, 5 min) | ||
Hydrogen fluoride | HF | 7664-39-3 | 30 | PEL TWA 3 ppm; REL TWA 3 ppm (2.5 mg/m³); TWA 3 ppm | 4 | POI | LCLo 313 (rabbit, 7 hr) | |
Hydrogen selenide | H2Se | 7783-07-5 | 1 | ACGIH (1990) TWA-TLV 0.05 ppm | 4 | 1.8 (G.Pig, 47 h) | ||
Hydrogen sulfide | H2S | 7783-06-4 | 100 | NIOSH PEL: Ceiling 20 ppm; REL Ceiling 10 ppm; ACGIH (1990) STEL-TLV 15 ppm | 4 | 444 | 0.3 | |
Hydrogen telluride | H2Te | 7783-09-7 | 4 | |||||
Nickel tetracarbonyl | Ni(CO)4 | 13463-39-3 | 2 | NIOSH TWA PEL 0.001 ppm; ACGIH (1980) TWA-TLV 0.05 ppm | 4 | 9.642 [11] | ||
Nitrogen dioxide | NO2 | 10102-44-0 | 13 | NIOSH PEL Ceiling 5 ppm; REL ST 1 ppm | 3 | OX | 99 (mice, 1 h) | 4 |
Osmium tetroxide | OsO4 | 20816-12-0 | 0.001 | NIOSH PEL TWA 0.0002 ppm; REL TWA 0.0002 ppm, ST 0.0006 ppm | 3 | OX | 40 (rat, 4 h) | 0.0019 |
Oxygen difluoride | OF2 | 7783-41-7 | 0.5 | NIOSH PEL TWA 0.05 ppm; REL Ceiling 0.05 ppm; ACGIH (1983) ceiling limit 0.05 ppm | 4 | OX | 26.067 (Rhesus monkeys, 1 h) | 0.5 |
Perchloryl fluoride | ClFO3 | 7616-94-6 | 100 | NIOSH PEL TWA 3 ppm; REL TWA 3 ppm, ST 6 ppm; ACGIH (1962) STEL-TLV 6 ppm | 3 | OX | 385 (Rat, 4 h) | |
Perfluoroisobutylene | C4F8 | 382-21-8 | 1.2 ppm | 17 (Rat, 10 min) | ||||
Phosgene | CCl2O | 75-44-5 | 2 | NIOSH PEL TWA 0.1 ppm; REL TWA 0.1 ppm, Ceiling 0.2 ppm; ACGIH (1992) TWA-TLV 0.1 ppm | 4 | 0.5 to 1.5 | ||
Phosphine | PH3 | 7803-51-2 | 50 | NIOSH 0.3 ppm time weighted average; ACGIH (1992) STEL-TLV 1 ppm | 4 | 0.44 (Rat, 4 h) | ||
Phosphorus pentafluoride [12] | PF5 | 7647-19-0 | 25 | TLV - TWA 0.25 ppm ACGIH & OSHA | 4 | |||
Selenium hexafluoride | SeF6 | 7783-79-1 | 2 | OSHA PEL, NIOSH REL, ACGIH (1992) TWA-TLV 0.05 ppm | 3 | |||
Silicon tetrachloride [13] | SiCl4 | 10026-04-7 | OSHA PEL, NIOSH REL 5 ppm; ACGIH TLV 2 ppm | 3 | 8000 (Rat, 4 h) | 1 - 5 | ||
Silicon tetrafluoride | SiF4 | 7783-61-1 | 3 | 922 (Rat, 1 h) | ||||
Stibine [14] | H3Sb | 7803-52-3 | 5 | OSHA PEL/NIOSH REL/ACGIH TLV: 0.1 ppm | 4 | |||
Disulfur decafluoride | S2F10 | 5714-22-7 | 1 | ACGIH (1962) ceiling limit 0.01 ppm | 4 | OX | 2 (Rat, 10 min) | |
Sulfur tetrafluoride | SF4 | 7783-60-0 | OSHA PEL/NIOSH REL/ACGIH (1992) ceiling limit 0.1 ppm [15] | 3 | 40 (Rat, 1 h) [15] | |||
Tellurium hexafluoride | TeF6 | 7783-80-4 | 1 | NIOSH REL/ACGIH (1992) TWA-TLV 0.02 ppm | ||||
Tetraethyl pyrophosphate [note 1] | C8H20O7P2 | 107-49-3 | 5 | ACGIH (2006) TWA-TLV 0.01 mg/m3 | 4 | |||
Sulfotep | C8H20O5P2S2 | 3689-24-5 | 10 | NIOSH PEL TWA 0.2 ppm | 4 | 38 (Rat, 4 h) | ||
Trifluoroacetyl chloride | C2ClF3O | 354-32-5 | ||||||
Tungsten hexafluoride [16] | WF6 | 7783-82-6 | OSHA PEL TWA 2.5 ppm; ACGIH TLV TWA 3 ppm | 3 | 218 (Rat, 1 h) |
Toxicity is the degree to which a chemical substance or a particular mixture of substances can damage an organism. Toxicity can refer to the effect on a whole organism, such as an animal, bacterium, or plant, as well as the effect on a substructure of the organism, such as a cell (cytotoxicity) or an organ such as the liver (hepatotoxicity). Sometimes the word is more or less synonymous with poisoning in everyday usage.
Coal dust is a fine-powdered form of coal which is created by the crushing, grinding, or pulverization of coal rock. Because of the brittle nature of coal, coal dust can be created by mining, transporting, or mechanically handling it.
Dichloromethane is an organochlorine compound with the formula CH2Cl2. This colorless, volatile liquid with a chloroform-like, sweet odor is widely used as a solvent. Although it is not miscible with water, it is slightly polar, and miscible with many organic solvents.
In toxicology, the lethal dose (LD) is an indication of the lethal toxicity of a given substance or type of radiation. Because resistance varies from one individual to another, the "lethal dose" represents a dose at which a given percentage of subjects will die. The lethal concentration is a lethal dose measurement used for gases or particulates. The LD may be based on the standard person concept, a theoretical individual that has perfectly "normal" characteristics, and thus not apply to all sub-populations.
White spirit (AU, UK and Ireland) or mineral spirits (US, Canada), also known as mineral turpentine (AU/NZ/ZA), turpentine substitute, and petroleum spirits, is a petroleum-derived clear liquid used as a common organic solvent in painting. There are also terms for specific kinds of white spirit, including Stoddard solvent and solvent naphtha (petroleum). White spirit is often used as a paint thinner, or as a component thereof, though paint thinner is a broader category of solvent. Odorless mineral spirits (OMS) have been refined to remove the more toxic aromatic compounds, and are recommended for applications such as oil painting.
The permissible exposure limit is a legal limit in the United States for exposure of an employee to a chemical substance or physical agent such as high level noise. Permissible exposure limits were established by the Occupational Safety and Health Administration (OSHA). Most of OSHA's PELs were issued shortly after adoption of the Occupational Safety and Health (OSH) Act in 1970.
Acute toxicity describes the adverse effects of a substance that result either from a single exposure or from multiple exposures in a short period of time. To be described as acute toxicity, the adverse effects should occur within 14 days of the administration of the substance.
Chemical hazards are hazards present in hazardous chemicals and hazardous materials. Exposure to certain chemicals can cause acute or long-term adverse health effects. Chemical hazards are usually classified separately from biological hazards (biohazards). Chemical hazards are classified into groups that include asphyxiants, corrosives, irritants, sensitizers, carcinogens, mutagens, teratogens, reactants, and flammables. In the workplace, exposure to chemical hazards is a type of occupational hazard. The use of personal protective equipment may substantially reduce the risk of adverse health effects from contact with hazardous materials.
Pentaborane(9) is an inorganic compound with the formula B5H9. It is one of the most common boron hydride clusters, although it is a highly reactive compound. Because of its high reactivity with oxygen, it was once evaluated as rocket or jet fuel. Like many of the smaller boron hydrides, pentaborane is colourless, diamagnetic, and volatile. It is related to pentaborane(11).
Ethylbenzene is an organic compound with the formula C6H5CH2CH3. It is a highly flammable, colorless liquid with an odor similar to that of gasoline. This monocyclic aromatic hydrocarbon is important in the petrochemical industry as a reaction intermediate in the production of styrene, the precursor to polystyrene, a common plastic material. In 2012, more than 99% of ethylbenzene produced was consumed in the production of styrene.
Chloroprene (IUPAC name 2-chlorobuta-1,3-diene) is a chemical compound with the molecular formula CH2=CCl−CH=CH2. Chloroprene is a colorless volatile liquid, almost exclusively used as a monomer for the production of the polymer polychloroprene, better known as neoprene, a type of synthetic rubber.
2-Butoxyethanol is an organic compound with the chemical formula BuOC2H4OH. This colorless liquid has a sweet, ether-like odor, as it derives from the family of glycol ethers, and is a butyl ether of ethylene glycol. As a relatively nonvolatile, inexpensive solvent, it is used in many domestic and industrial products because of its properties as a surfactant. It is a known respiratory irritant and can be acutely toxic, but animal studies did not find it to be mutagenic, and no studies suggest it is a human carcinogen. A study of 13 classroom air contaminants conducted in Portugal reported a statistically significant association with increased rates of nasal obstruction and a positive association below the level of statistical significance with a higher risk of obese asthma and increased body mass index.
Hydrogen selenide is an inorganic compound with the formula H2Se. This hydrogen chalcogenide is the simplest and most commonly encountered hydride of selenium. H2Se is a colorless, flammable gas under standard conditions. It is the most toxic selenium compound with an exposure limit of 0.05 ppm over an 8-hour period. Even at extremely low concentrations, this compound has a very irritating smell resembling that of decayed horseradish or "leaking gas", but smells of rotten eggs at higher concentrations.
1,1,2-Trichloroethane, vinyl trichloride or 1,1,2-TCA, is an organochloride solvent with the molecular formula C2H3Cl3 and the structural formula CH2Cl—CHCl2. It is a colourless, sweet-smelling liquid that does not dissolve in water, but is soluble in most organic solvents. It is an isomer of 1,1,1-trichloroethane, and a byproduct of its manufacture.
The Globally Harmonized System of Classification and Labelling of Chemicals (GHS) is an internationally agreed-upon standard managed by the United Nations that was set up to replace the assortment of hazardous material classification and labelling schemes previously used around the world. Core elements of the GHS include standardized hazard testing criteria, universal warning pictograms, and safety data sheets which provide users of dangerous goods relevant information with consistent organization. The system acts as a complement to the UN numbered system of regulated hazardous material transport. Implementation is managed through the UN Secretariat. Although adoption has taken time, as of 2017, the system has been enacted to significant extents in most major countries of the world. This includes the European Union, which has implemented the United Nations' GHS into EU law as the CLP Regulation, and United States Occupational Safety and Health Administration standards.
Poisonous material is a material, other than a gas, known to be so toxic to humans that it presents a health hazard during transportation.
Sterilant gas monitoring is the detection of hazardous gases used by health care and other facilities to sterilize medical supplies that cannot be sterilized by heat or steam methods. The current FDA approved sterilant gases are ethylene oxide, hydrogen peroxide and ozone. Other liquid sterilants, such as peracetic acid, may also be used for sterilization and may raise similar occupational health issues. Sterilization means the complete destruction of all biological life, and sterilization efficacy is typically considered adequate if less than one in a million microbes remain viable.
Manure management refers to capture, storage, treatment, and utilization of animal manures in an environmentally sustainable manner. It can be retained in various holding facilities. Animal manure can occur in a liquid, slurry, or solid form. It is utilized by distribution on fields in amounts that enrich soils without causing water pollution or unacceptably high levels of nutrient enrichment. Manure management is a component of nutrient management.
Inhalation is a major route of exposure that occurs when an individual breathes in polluted air which enters the respiratory tract. Identification of the pollutant uptake by the respiratory system can determine how the resulting exposure contributes to the dose. In this way, the mechanism of pollutant uptake by the respiratory system can be used to predict potential health impacts within the human population.
Chlorine gas poisoning is an illness resulting from the effects of exposure to chlorine beyond the threshold limit value.