Gridley-class destroyer

Last updated

USS McCall (DD-400) underway c1938.jpg
USS McCall in 1938
Class overview
NameGridley-class destroyer
Builders
OperatorsFlag of the United States (1912-1959).svg  United States Navy
Preceded by Mahan class
Succeeded by Bagley class
Built1935–1938
In commission1937–1946
Completed4
Retired4
General characteristics
Type Destroyer
Displacement
  • 1590 tons standard,
  • 2219 tons full load
Length340 ft 10 in (103.89 m)
Beam35 ft 10 in (10.92 m)
Draft12 ft 9 in (3.89 m)
Installed power
Propulsion2 shafts
Speed38.5 knots (71.3 km/h; 44.3 mph)
Range5,520 nautical miles (10,220 km; 6,350 mi) at 12 kn (22 km/h; 14 mph)
Complement
  • 8 officers, 150 enlisted (peacetime)
  • 250 (wartime)
Sensors and
processing systems		 Mk33 GFCS [1]
Armament

The Gridley-class destroyers, named for Charles Vernon Gridley, were a class of four 1500-ton destroyers in the United States Navy. They were part of a series of USN destroyers limited to 1,500 tons standard displacement by the London Naval Treaty and built in the 1930s. [2] The first two ships were laid down on 3 June 1935 and commissioned in 1937. The second two were laid down in March 1936 and commissioned in 1938. Based on the preceding Mahan-class destroyers with somewhat different machinery, they had the same hull but had only a single stack and mounted sixteen 21 inch (533 mm) torpedo tubes, an increase of four. To compensate for the increased torpedo armament weight, the gun armament was slightly reduced from five 5"/38 caliber guns (127 mm) to four. [3] USS Maury (DD-401) made the highest trial speed ever recorded for a United States Navy destroyer, 42.8 knots. [4] All four ships served extensively in World War II, notably in the Solomon Islands and the Battle of the Philippine Sea, with Maury receiving a Presidential Unit Citation. [5]

Contents

Design

The four Gridleys were part of a series of three classes with similar characteristics laid down 1935-1937. The other two were the Bagley class (8 ships) and the Benham class (10 ships). All three featured four 5 inch (127 mm) guns and sixteen 21 inch (533 mm) torpedo tubes in four quadruple mounts as built, the largest number of torpedo tubes on any US destroyers. [3] Although all had only one stack, they differed primarily in their machinery. The Gridleys were designed by Bethlehem Shipbuilding Company with advanced high-pressure boilers (also built by Bethlehem) but turbines generally similar to the earlier Farragut class, which limited their range. The Bagleys were a Navy design that duplicated the machinery of the preceding long-range Mahan class. The Benhams were a Gibbs & Cox design with another new boiler design that allowed a reduction from four boilers to three, with an efficient turbine arrangement resembling the Mahans'. [2] [3] [6]

Engineering

The Gridleys' boilers were a significant upgrade from the Mahan class, with steam pressure increased from 465 psi (3,210 kPa) to 565 psi (3,900 kPa), superheated in both cases to 700 °F (371 °C). [2] [7] The increased steam pressure contributed to fuel economy. The boilers were Yarrow-type boilers built by Bethlehem Steel. However, the turbines were generally similar to the Farragut class, and thus were less efficient than those in the Mahan class. They were Parsons-type reaction turbines built by Bethlehem Steel, with single-reduction gearing and no cruising turbines. [8] The result was a reduced range of 5,520 nautical miles (10,220 km; 6,350 mi) compared to 6,940 nautical miles (12,850 km; 7,990 mi) for the Mahans.

Armament

The Gridleys introduced an armament of four 5 inch (127 mm) dual purpose guns (anti-surface and anti-aircraft (AA)) in single mounts and sixteen 21 inch (533 mm) torpedo tubes in quadruple mounts for US destroyers. [3] The class was initially equipped with the Mark 11 torpedo or Mark 12 torpedo, which were replaced by the Mark 15 torpedo beginning in 1938. [9] Their near-sisters the Bagleys and Benhams duplicated this armament, the heaviest in torpedoes ever on US destroyers. Compared with the Mahans, they sacrificed one gun for four additional torpedo tubes. It was suggested that these ships could use "curved ahead fire", using the adjustable post-launch gyro angle of their torpedoes to launch a sixteen-torpedo spread ahead of the ship. [3] One reason for the heavy destroyer torpedo armament was that, alone among the major navies, the last nine of the seventeen US Treaty cruisers built in the 1920s and 1930s lacked torpedoes; eventually all of the US Treaty cruisers' torpedoes were removed in 1941 in favor of additional heavy AA guns. [10]

As with most other US destroyers of this period, the 5 inch guns featured all-angle power loading and were director controlled, making them as effective as the technology allowed against aircraft. By late 1942, radio proximity fuses (VT fuses) made them much more effective. As in the last two Mahans, the two forward 5 inch guns were in enclosed mounts, while the after guns were open. However, in common with all US surface combatants in the 1930s, the light AA armament was weak; only four .50 caliber machine guns (12.7 mm) were equipped. It was apparently felt that the heavy AA armament would shoot down most incoming aircraft in all situations, but the attack on Pearl Harbor showed that this was not true. [11] The Gridleys' weak AA armament was partially remedied after Pearl Harbor by replacing the machine guns with seven 20 mm Oerlikon cannon (0.8 in). [12] The Gridleys were alone among the 1930s and 1940s destroyers in not receiving any 40 mm Bofors guns (1.6 in) due to stability concerns. [4] [13] Most of these destroyers had some or all torpedo tubes replaced by light AA guns during World War II, but not the Gridleys.

As with their contemporaries, the Gridleys' anti-submarine warfare (ASW) armament started with two depth charge racks aft. Photographs show that these were augmented during World War II by four K-gun depth charge throwers. [12]

Service

From their completion through mid-World War II, the four Gridleys formed Destroyer Division 11 of Destroyer Squadron 6. Based at Pearl Harbor in 1941, the squadron was at sea escorting USS Enterprise (CV-6) on 7 December 1941, then was dispersed among carrier task forces during the Marshalls-Gilberts raids of early 1942. While Gridley and McCall were sent to the Aleutians in June, Maury was at the battles of the Coral Sea and Midway, and then went to Guadalcanal, where she participated in the Battle of Tassafaronga in November. Craven and McCall escorted convoys to Guadalcanal during this period. The four ships of the class were reunited to screen USS Saratoga (CV-3) for the New Georgia landings in June 1943; then Maury was at the Battle of Kolombangara in July, and with Craven for the Battle of Vella Gulf in August. Maury then received a Presidential Unit Citation for the period 1 February 1942 to 6 August 1943. [5] Gridley and Maury were at the Gilbert Islands/Tarawa invasion in November of that year. All four destroyers operated together in the Marshalls and Marianas campaigns (including the Battle of the Philippine Sea) through mid-1944, and, less Craven (which went to the Atlantic), continued screening escort carriers off the Philippines (including the Battle of Leyte Gulf) and Formosa into 1945. [4]

In 1945, due to their poor suitability for adequate anti-aircraft upgrades, the three ships remaining in the Pacific were withdrawn. Maury, with a crack in her deck that was no longer deemed worth repairing, was decommissioned in October, two months after hostilities ceased. McCall was overhauled at New York but then decommissioned in November. Gridley was overhauled in New York in early 1945, and Craven at Pearl Harbor in late 1944. Both operated in the Atlantic and Mediterranean until January 1946, but then returned to Pearl Harbor where they were decommissioned in 1946. In common with nearly all pre-war US destroyers, all were scrapped by the end of 1948. [4]

Ships in class

Ships of the Gridley destroyer class [14]
NameHull no.BuilderLaid downLaunchedCommissionedDecommissionedFate
Gridley DD-380 Bethlehem Shipbuilding Corporation, Fore River Shipyard 3 June 19351 December 193624 June 193718 April 1946Scrapped 1947
Craven DD-38225 February 19372 September 193719 April 1946Scrapped 1947
McCall DD-400 Bethlehem Shipbuilding Corporation, San Francisco California 17 March 193620 November 193722 June 193830 November 1945Scrapped 1947
Maury DD-40124 March 193614 February 19385 August 193819 October 1945Scrapped 1946

See also

Related Research Articles

<i>Mahan</i>-class destroyer Former class of US Navy destroyers

Mahan-class destroyers of the United States Navy were a series of 18 destroyers of which the first 16 were laid down in 1934. The last two of the 18, Dunlap and Fanning, are sometimes considered a separate ship class. All 18 were commissioned in 1936 and 1937. Mahan was the lead ship, named for Rear Admiral Alfred Thayer Mahan, an influential historian and theorist on sea power.

<i>Benham</i>-class destroyer Destroyer class of the US Navy

The Benham class of ten destroyers was built for the United States Navy (USN). They were part of a series of USN destroyers limited to 1,500 tons standard displacement by the London Naval Treaty and built in the 1930s. The class was laid down in 1936-1937 and all were commissioned in 1939. Much of their design was based on the immediately preceding Gridley and Bagley-class destroyers. Like these classes, the Benhams were notable for including sixteen 21-inch (533 mm) torpedo tubes, the heaviest torpedo armament ever on US destroyers. They introduced a new high-pressure boiler that saved space and weight, as only three of the new boilers were required compared to four of the older designs. The class served extensively in World War II in the Atlantic, Mediterranean, and Pacific theaters, including Neutrality Patrols in the Atlantic 1940-1941. Sterett received the United States Presidential Unit Citation for the Battle of Guadalcanal and the Battle of Vella Gulf, and the Philippine Republic Presidential Unit Citation for her World War II service. Two of the class were lost during World War II, three were scrapped in 1947, while the remaining five ships were scuttled after being contaminated from the Operation Crossroads atomic bomb tests at Bikini Atoll in the Pacific.

<i>Clemson</i>-class destroyer Destroyer class of the US Navy

The Clemson class was a series of 156 destroyers which served with the United States Navy from after World War I through World War II.

<i>Wickes</i>-class destroyer Destroyer class of the US Navy

The Wickes-class destroyers were a class of 111 destroyers built by the United States Navy in 1917–19. Together with the six preceding Caldwell-class and following 156 subsequent Clemson-class destroyers, they were grouped as the "flush-deck" or "four-stack" type. Only a few were completed in time to serve in World War I, including USS Wickes, the lead ship of the class.

<i>Sims</i>-class destroyer Destroyer class of the US Navy

The Sims-class destroyers were built for the United States Navy, and commissioned in 1939 and 1940. These twelve ships were the last United States destroyer class completed prior to the American entry into World War II. All Sims-class ships saw action in World War II, and seven survived the war. No ship of this class saw service after 1946. They were built under the Second London Naval Treaty, in which the limit on destroyer standard displacement was lifted, but an overall limit remained. Thus, to maximize the number of destroyers and avoid developing an all-new design, the Sims class were only 70 tons larger as designed than previous destroyers. They are usually grouped with the 1500-ton classes and were the sixth destroyer class since production resumed with the Farragut class in 1932.

USS <i>Ingraham</i> (DD-111) Wickes-class destroyer

USS Ingraham (DD-111) was a Wickes-class destroyer built for the United States Navy during World War I.

USS <i>Ludlow</i> (DD-112) Wickes-class destroyer

USS Ludlow (DD-112) was a Wickes-class destroyer built for the United States Navy during World War I.

USS <i>DeLong</i> (DD-129) Wickes-class destroyer

USS DeLong (DD-129) was a Wickes-class destroyer built for the United States Navy during World War I.

USS <i>Burns</i> (DD-171) Wickes-class destroyer

USS Burns (DD-171) was a Wickes-class destroyer built for the United States Navy during World War I.

USS <i>Anthony</i> (DD-172) Wickes-class destroyer

USS Anthony (DD-172) was a Wickes-class destroyer built for the United States Navy during World War I.

USS <i>Sproston</i> (DD-173) Wickes-class destroyer of the United States Navy

USS Sproston (DD-173) was a Wickes-class destroyer built for the United States Navy during World War I.

<i>Benson</i>-class destroyer U.S. Navy ship class (built 1939–1943)

The Benson class was a class of destroyers of the U.S. Navy built 1939–1943. The thirty 1,620-ton Benson-class destroyers were built in two groups. The first six were authorized in fiscal year 1938 (FY38) and laid down at Bethlehem Steel, Quincy, Massachusetts, and three naval shipyards. The remaining 24 "repeat Bensons" were authorized in 1940–42 and built at four Bethlehem Steel yards. They were laid down after the first group was commissioned. These plus the "repeat Livermores" were also known at the time as the Bristol class. During World War II the Bensons were usually combined with the Livermores as the Benson-Livermore class; this persisted in references until at least the 1960s. In some references both classes are combined and called the Benson class. The Benson- and Gleaves-class destroyers were the backbone of the pre-war Neutrality Patrols and brought the action to the enemy by participating in every major campaign of the war.

USS <i>Doyen</i> (DD-280) Clemson-class destroyer

USS Doyen (DD-280) was a Clemson-class destroyer built for the United States Navy during World War I.

<i>Gleaves</i>-class destroyer Destroyer class of the US Navy

The Gleaves-class destroyers were a class of 66 destroyers of the United States Navy built 1938–42, designed by Gibbs & Cox. The first ship of the class was USS Gleaves. They were the destroyer type that was in production for the US Navy when the United States entered World War II.

<i>Caldwell</i>-class destroyer Destroyer class of the US Navy

The Caldwell class was a class of six "flush deck" United States Navy destroyers built during World War I and shortly after. Four served as convoy escorts in the Atlantic; the other two were completed too late for wartime service. Two were scrapped during the 1930s, but four survived to serve throughout World War II, three of these in service with the Royal Navy under the Destroyers for Bases Agreement and the fourth as a high speed transport.

<i>Farragut</i>-class destroyer (1934) 1934 Destroyer class of the US Navy

The Farragut-class destroyers were a class of eight 1,365-ton destroyers in the United States Navy and the first US destroyers of post-World War I design. Their construction, along with the Porter class, was authorized by Congress on 29 April 1916, but funding was delayed considerably. Limited to 1,500 tons standard displacement by the provisions of the London Naval Treaty of 1930, the ships were laid down beginning in 1932 and were completed by 1935. After 12 years since the last of the previous class of American destroyers was commissioned, the Farraguts were commissioned in 1934 and 1935.

<i>Porter</i>-class destroyer Destroyer class of the US Navy

The Porter-class destroyers were a class of eight 1,850-ton large destroyers in the United States Navy. Like the preceding Farragut-class, their construction was authorized by Congress on 26 April 1916, but funding was delayed considerably. They were designed based on a 1,850-ton standard displacement limit imposed by the London Naval Treaty; the treaty's tonnage limit allowed 13 ships of this size, and the similar Somers class was built later to meet the limit. The first four Porters were laid down in 1933 by New York Shipbuilding in Camden, New Jersey, and the next four in 1934 at Bethlehem Steel Corporation in Quincy, Massachusetts. All were commissioned in 1936 except Winslow, which was commissioned in 1937. They were built in response to the large Fubuki-class destroyers that the Imperial Japanese Navy was building at the time and were initially designated as flotilla leaders. They served extensively in World War II, in the Pacific War, the Atlantic, and in the Americas. Porter was the class' only loss, in the Battle of the Santa Cruz Islands on 26 October 1942.

USS <i>Mahan</i> (DD-364) Lead ship of Mahan-class

USS Mahan (DD-364) was the lead ship of the United States Navy's Mahan-class destroyers. The ship was named for Rear Admiral Alfred Thayer Mahan, a 19th-century naval historian and strategic theorist. Her design ushered in major advances over traditional destroyers. Among them were a third set of quadruple torpedo tubes, protective gun shelters, and emergency diesel generators, along with a steam propulsion system that was simpler and more efficient to operate.

<i>Bagley</i>-class destroyer Destroyer class of the US Navy

The Bagley class of eight destroyers was built for the United States Navy. They were part of a series of USN destroyers limited to 1,500 tons standard displacement by the London Naval Treaty and built in the 1930s. All eight ships were ordered and laid down in 1935 and subsequently completed in 1937. Their layout was based on the concurrently-built Gridley class destroyer design and was similar to the Benham class as well; all three classes were notable for including sixteen 21 inch torpedo tubes, the heaviest torpedo armament ever on US destroyers. They retained the fuel-efficient power plants of the Mahan-class destroyers, and thus had a slightly lower speed than the Gridleys. However, they had the extended range of the Mahans, 1,400 nautical miles (2,600 km) farther than the Gridleys. The Bagley class destroyers were readily distinguished visually by the prominent external trunking of the boiler uptakes around their single stack.

<i>Somers</i>-class destroyer Destroyer class of the US Navy

The Somers-class destroyer was a class of five 1850-ton United States Navy destroyers based on the Porter class. They were answers to the large destroyers that the Japanese navy was building at the time, and were initially intended to be flotilla leaders. They were laid down from 1935–1936 and commissioned from 1937–1939. They were built to round-out the thirteen destroyers of 1,850 tons standard displacement allowed by the tonnage limits of the London Naval Treaty, and were originally intended to be repeat Porters. However, new high-pressure, high-temperature boilers became available, allowing the use of a single stack. This combined with weight savings allowed an increase from two quadruple center-line torpedo tube mounts to three. However, the Somers class were still over-weight and top-heavy. This was the first US destroyer class to use 600 psi (4,100 kPa) steam superheated to 850 °F (454 °C), which became standard for US warships built in the late 1930s and World War II.

References

  1. ↑ Friedman p. 407
  2. 1 2 3 Comparison of 1500-ton classes at Destroyer History Foundation Archived 2009-02-19 at the Wayback Machine
  3. 1 2 3 4 5 Friedman, pp. 90-91
  4. 1 2 3 4 Gridley-class destroyers at Destroyer History Foundation Archived 2009-02-19 at the Wayback Machine
  5. 1 2 USS Maury Presidential Unit Citation
  6. ↑ Bauer and Roberts, pp. 186-187
  7. ↑ Friedman, pp. 467-468
  8. ↑ USS Gridley (DD-380) and USS Craven (DD-382) General Information Book with as-built data at Destroyer History Foundation Archived 2009-02-19 at the Wayback Machine
  9. ↑ "Torpedo History: Torpedo Mk 11, Mk 12 and Torpedo Mk 15" . Retrieved 7 July 2015.
  10. ↑ Gardiner and Chesneau, pp. 112-116
  11. ↑ Friedman, pp. 203-204
  12. 1 2 USS Craven photo gallery at NavSource.org
  13. ↑ Friedman, pp. 208-209
  14. ↑ Bauer and Roberts, p. 186
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.