Fock space

The Fock space is an algebraic construction used in quantum mechanics to construct the quantum states space of a variable or unknown number of identical particles from a single particle Hilbert space H. It is named after V. A. Fock who first introduced it in his 1932 paper "Konfigurationsraum und zweite Quantelung" ("Configuration space and second quantization"). ^{[1] [2]}

Contents

• Definition
• Product states, indistinguishable particles, and a useful basis for Fock space
• Wave function interpretation
• Relation to the Segal–Bargmann space
• See also
• References
• External links

Informally, a Fock space is the sum of a set of Hilbert spaces representing zero particle states, one particle states, two particle states, and so on. If the identical particles are bosons, the n-particle states are vectors in a symmetrized tensor product of n single-particle Hilbert spaces H. If the identical particles are fermions, the n-particle states are vectors in an antisymmetrized tensor product of n single-particle Hilbert spaces H (see symmetric algebra and exterior algebra respectively). A general state in Fock space is a linear combination of n-particle states, one for each n.

Technically, the Fock space is (the Hilbert space completion of) the direct sum of the symmetric or antisymmetric tensors in the tensor powers of a single-particle Hilbert space H, $${\displaystyle F_{\nu }(H)={\overline {\bigoplus _{n=0}^{\infty }S_{\nu }H^{\otimes n}}}~.}$$

Here ${\displaystyle S_{\nu }}$ is the operator which symmetrizes or antisymmetrizes a tensor, depending on whether the Hilbert space describes particles obeying bosonic ${\displaystyle (\nu =+)}$ or fermionic ${\displaystyle (\nu =-)}$ statistics, and the overline represents the completion of the space. The bosonic (resp. fermionic) Fock space can alternatively be constructed as (the Hilbert space completion of) the symmetric tensors ${\displaystyle F_{+}(H)={\overline {S^{*}H}}}$ (resp. alternating tensors ${\textstyle F_{-}(H)={\overline {{\bigwedge }^{*}H}}}$). For every basis for H there is a natural basis of the Fock space, the Fock states.

Definition

The Fock space is the (Hilbert) direct sum of tensor products of copies of a single-particle Hilbert space ${\displaystyle H}$

$${\displaystyle F_{\nu }(H)=\bigoplus _{n=0}^{\infty }S_{\nu }H^{\otimes n}=\mathbb {C} \oplus H\oplus \left(S_{\nu }\left(H\otimes H\right)\right)\oplus \left(S_{\nu }\left(H\otimes H\otimes H\right)\right)\oplus \cdots }$$

Here ${\displaystyle \mathbb {C} }$, the complex scalars, consists of the states corresponding to no particles, ${\displaystyle H}$ the states of one particle, ${\displaystyle S_{\nu }(H\otimes H)}$ the states of two identical particles etc.

A general state in ${\displaystyle F_{\nu }(H)}$ is given by

$${\displaystyle |\Psi \rangle _{\nu }=|\Psi _{0}\rangle _{\nu }\oplus |\Psi _{1}\rangle _{\nu }\oplus |\Psi _{2}\rangle _{\nu }\oplus \cdots =a|0\rangle \oplus \sum _{i}a_{i}|\psi _{i}\rangle \oplus \sum _{ij}a_{ij}|\psi _{i},\psi _{j}\rangle _{\nu }\oplus \cdots }$$ where

• ${\displaystyle |0\rangle }$ is a vector of length 1 called the vacuum state and ${\displaystyle a\in \mathbb {C} }$ is a complex coefficient,
• ${\displaystyle |\psi _{i}\rangle \in H}$ is a state in the single particle Hilbert space and ${\displaystyle a_{i}\in \mathbb {C} }$ is a complex coefficient,
• ${\textstyle |\psi _{i},\psi _{j}\rangle _{\nu }=a_{ij}|\psi _{i}\rangle \otimes |\psi _{j}\rangle +a_{ji}|\psi _{j}\rangle \otimes |\psi _{i}\rangle \in S_{\nu }(H\otimes H)}$, and ${\displaystyle a_{ij}=\nu a_{ji}\in \mathbb {C} }$ is a complex coefficient, etc.

The convergence of this infinite sum is important if ${\displaystyle F_{\nu }(H)}$ is to be a Hilbert space. Technically we require ${\displaystyle F_{\nu }(H)}$ to be the Hilbert space completion of the algebraic direct sum. It consists of all infinite tuples ${\displaystyle |\Psi \rangle _{\nu }=(|\Psi _{0}\rangle _{\nu },|\Psi _{1}\rangle _{\nu },|\Psi _{2}\rangle _{\nu },\ldots )}$ such that the norm, defined by the inner product is finite $${\displaystyle \||\Psi \rangle _{\nu }\|_{\nu }^{2}=\sum _{n=0}^{\infty }\langle \Psi _{n}|\Psi _{n}\rangle _{\nu }<\infty }$$ where the ${\displaystyle n}$ particle norm is defined by $${\displaystyle \langle \Psi _{n}|\Psi _{n}\rangle _{\nu }=\sum _{i_{1},\ldots i_{n}}\sum _{j_{1},\ldots j_{n}}a_{i_{1},\ldots ,i_{n}}^{*}a_{j_{1},\ldots ,j_{n}}\langle \psi _{i_{1}}|\psi _{j_{1}}\rangle \cdots \langle \psi _{i_{n}}|\psi _{j_{n}}\rangle }$$ i.e., the restriction of the norm on the tensor product ${\displaystyle H^{\otimes n}}$

For two general states $${\displaystyle |\Psi \rangle _{\nu }=|\Psi _{0}\rangle _{\nu }\oplus |\Psi _{1}\rangle _{\nu }\oplus |\Psi _{2}\rangle _{\nu }\oplus \cdots =a|0\rangle \oplus \sum _{i}a_{i}|\psi _{i}\rangle \oplus \sum _{ij}a_{ij}|\psi _{i},\psi _{j}\rangle _{\nu }\oplus \cdots ,}$$ and $${\displaystyle |\Phi \rangle _{\nu }=|\Phi _{0}\rangle _{\nu }\oplus |\Phi _{1}\rangle _{\nu }\oplus |\Phi _{2}\rangle _{\nu }\oplus \cdots =b|0\rangle \oplus \sum _{i}b_{i}|\phi _{i}\rangle \oplus \sum _{ij}b_{ij}|\phi _{i},\phi _{j}\rangle _{\nu }\oplus \cdots }$$ the inner product on ${\displaystyle F_{\nu }(H)}$ is then defined as $${\displaystyle \langle \Psi |\Phi \rangle _{\nu }:=\sum _{n}\langle \Psi _{n}|\Phi _{n}\rangle _{\nu }=a^{*}b+\sum _{ij}a_{i}^{*}b_{j}\langle \psi _{i}|\phi _{j}\rangle +\sum _{ijkl}a_{ij}^{*}b_{kl}\langle \psi _{i}|\phi _{k}\rangle \langle \psi _{j}|\phi _{l}\rangle _{\nu }+\cdots }$$ where we use the inner products on each of the ${\displaystyle n}$-particle Hilbert spaces. Note that, in particular the ${\displaystyle n}$ particle subspaces are orthogonal for different ${\displaystyle n}$.

Product states, indistinguishable particles, and a useful basis for Fock space

A product state of the Fock space is a state of the form

$${\displaystyle |\Psi \rangle _{\nu }=|\phi _{1},\phi _{2},\cdots ,\phi _{n}\rangle _{\nu }=|\phi _{1}\rangle \otimes |\phi _{2}\rangle \otimes \cdots \otimes |\phi _{n}\rangle }$$

which describes a collection of ${\displaystyle n}$ particles, one of which has quantum state ${\displaystyle \phi _{1}}$, another ${\displaystyle \phi _{2}}$ and so on up to the ${\displaystyle n}$th particle, where each ${\displaystyle \phi _{i}}$ is any state from the single particle Hilbert space ${\displaystyle H}$. Here juxtaposition (writing the single particle kets side by side, without the ${\displaystyle \otimes }$) is symmetric (resp. antisymmetric) multiplication in the symmetric (antisymmetric) tensor algebra. The general state in a Fock space is a linear combination of product states. A state that cannot be written as a convex sum of product states is called an entangled state.

When we speak of one particle in state ${\displaystyle \phi _{i}}$, we must bear in mind that in quantum mechanics identical particles are indistinguishable. In the same Fock space, all particles are identical. (To describe many species of particles, we take the tensor product of as many different Fock spaces as there are species of particles under consideration). It is one of the most powerful features of this formalism that states are implicitly properly symmetrized. For instance, if the above state ${\displaystyle |\Psi \rangle _{-}}$ is fermionic, it will be 0 if two (or more) of the ${\displaystyle \phi _{i}}$ are equal because the antisymmetric (exterior) product ${\displaystyle |\phi _{i}\rangle |\phi _{i}\rangle =0}$. This is a mathematical formulation of the Pauli exclusion principle that no two (or more) fermions can be in the same quantum state. In fact, whenever the terms in a formal product are linearly dependent; the product will be zero for antisymmetric tensors. Also, the product of orthonormal states is properly orthonormal by construction (although possibly 0 in the Fermi case when two states are equal).

A useful and convenient basis for a Fock space is the occupancy number basis. Given a basis ${\displaystyle \{|\psi _{i}\rangle \}_{i=0,1,2,\dots }}$ of ${\displaystyle H}$, we can denote the state with ${\displaystyle n_{0}}$ particles in state ${\displaystyle |\psi _{0}\rangle }$, ${\displaystyle n_{1}}$ particles in state ${\displaystyle |\psi _{1}\rangle }$, ..., ${\displaystyle n_{k}}$ particles in state ${\displaystyle |\psi _{k}\rangle }$, and no particles in the remaining states, by defining

$${\displaystyle |n_{0},n_{1},\ldots ,n_{k}\rangle _{\nu }=|\psi _{0}\rangle ^{n_{0}}|\psi _{1}\rangle ^{n_{1}}\cdots |\psi _{k}\rangle ^{n_{k}},}$$

where each ${\displaystyle n_{i}}$ takes the value 0 or 1 for fermionic particles and 0, 1, 2, ... for bosonic particles. Note that trailing zeroes may be dropped without changing the state. Such a state is called a Fock state. When the ${\displaystyle |\psi _{i}\rangle }$ are understood as the steady states of a free field, the Fock states describe an assembly of non-interacting particles in definite numbers. The most general Fock state is a linear superposition of pure states.

Two operators of great importance are the creation and annihilation operators, which upon acting on a Fock state add or respectively remove a particle in the ascribed quantum state. They are denoted ${\displaystyle a^{\dagger }(\phi )\,}$ for creation and ${\displaystyle a(\phi )}$for annihilation respectively. To create ("add") a particle, the quantum state ${\displaystyle |\phi \rangle }$ is symmetric or exterior- multiplied with ${\displaystyle |\phi \rangle }$; and respectively to annihilate ("remove") a particle, an (even or odd) interior product is taken with ${\displaystyle \langle \phi |}$, which is the adjoint of ${\displaystyle a^{\dagger }(\phi )}$. It is often convenient to work with states of the basis of ${\displaystyle H}$ so that these operators remove and add exactly one particle in the given basis state. These operators also serve as generators for more general operators acting on the Fock space, for instance the number operator giving the number of particles in a specific state ${\displaystyle |\phi _{i}\rangle }$ is ${\displaystyle a^{\dagger }(\phi _{i})a(\phi _{i})}$.

Wave function interpretation

Often the one particle space ${\displaystyle H}$ is given as ${\displaystyle L_{2}(X,\mu )}$, the space of square-integrable functions on a space ${\displaystyle X}$ with measure ${\displaystyle \mu }$ (strictly speaking, the equivalence classes of square integrable functions where functions are equivalent if they differ on a set of measure zero). The typical example is the free particle with ${\displaystyle H=L_{2}(\mathbb {R} ^{3},d^{3}x)}$ the space of square integrable functions on three-dimensional space. The Fock spaces then have a natural interpretation as symmetric or anti-symmetric square integrable functions as follows.

Let ${\displaystyle X^{0}=\{*\}}$ and ${\displaystyle X^{1}=X}$, ${\displaystyle X^{2}=X\times X}$, ${\displaystyle X^{3}=X\times X\times X}$, etc. Consider the space of tuples of points which is the disjoint union

$${\displaystyle X^{*}=X^{0}\bigsqcup X^{1}\bigsqcup X^{2}\bigsqcup X^{3}\bigsqcup \cdots .}$$

It has a natural measure ${\displaystyle \mu ^{*}}$ such that ${\displaystyle \mu ^{*}(X^{0})=1}$ and the restriction of ${\displaystyle \mu ^{*}}$ to ${\displaystyle X^{n}}$ is ${\displaystyle \mu ^{n}}$. The even Fock space ${\displaystyle F_{+}(L_{2}(X,\mu ))}$ can then be identified with the space of symmetric functions in ${\displaystyle L_{2}(X^{*},\mu ^{*})}$ whereas the odd Fock space ${\displaystyle F_{-}(L_{2}(X,\mu ))}$ can be identified with the space of anti-symmetric functions. The identification follows directly from the isometric mapping $${\displaystyle L_{2}(X,\mu )^{\otimes n}\to L_{2}(X^{n},\mu ^{n})}$$$${\displaystyle \psi _{1}(x)\otimes \cdots \otimes \psi _{n}(x)\mapsto \psi _{1}(x_{1})\cdots \psi _{n}(x_{n})}$$.

Given wave functions ${\displaystyle \psi _{1}=\psi _{1}(x),\ldots ,\psi _{n}=\psi _{n}(x)}$, the Slater determinant

$${\displaystyle \Psi (x_{1},\ldots x_{n})={\frac {1}{\sqrt {n!}}}{\begin{vmatrix}\psi _{1}(x_{1})&\cdots &\psi _{n}(x_{1})\\\vdots &\ddots &\vdots \\\psi _{1}(x_{n})&\cdots &\psi _{n}(x_{n})\\\end{vmatrix}}}$$ is an antisymmetric function on ${\displaystyle X^{n}}$. It can thus be naturally interpreted as an element of the ${\displaystyle n}$-particle sector of the odd Fock space. The normalization is chosen such that ${\displaystyle \|\Psi \|=1}$ if the functions ${\displaystyle \psi _{1},\ldots ,\psi _{n}}$ are orthonormal. There is a similar "Slater permanent" with the determinant replaced with the permanent which gives elements of ${\displaystyle n}$-sector of the even Fock space.

Relation to the Segal–Bargmann space

Define the Segal–Bargmann space ${\displaystyle B_{N}}$ ^[3] of complex holomorphic functions square-integrable with respect to a Gaussian measure:

$${\displaystyle {\mathcal {F}}^{2}\left(\mathbb {C} ^{N}\right)=\left\{f\colon \mathbb {C} ^{N}\to \mathbb {C} \mid \Vert f\Vert _{{\mathcal {F}}^{2}(\mathbb {C} ^{N})}<\infty \right\},}$$ where $${\displaystyle \Vert f\Vert _{{\mathcal {F}}^{2}(\mathbb {C} ^{N})}:=\int _{\mathbb {C} ^{N}}\vert f(\mathbf {z} )\vert ^{2}e^{-\pi \vert \mathbf {z} \vert ^{2}}\,d\mathbf {z} .}$$ Then defining a space ${\displaystyle B_{\infty }}$ as the nested union of the spaces ${\displaystyle B_{N}}$ over the integers ${\displaystyle N\geq 0}$, Segal ^[4] and Bargmann showed ^{[5] [6]} that ${\displaystyle B_{\infty }}$ is isomorphic to a bosonic Fock space. The monomial $${\displaystyle x_{1}^{n_{1}}...x_{k}^{n_{k}}}$$ corresponds to the Fock state $${\displaystyle |n_{0},n_{1},\ldots ,n_{k}\rangle _{\nu }=|\psi _{0}\rangle ^{n_{0}}|\psi _{1}\rangle ^{n_{1}}\cdots |\psi _{k}\rangle ^{n_{k}}.}$$

See also

Related Research Articles

Bra–ket notation, also called Dirac notation, is a notation for linear algebra and linear operators on complex vector spaces together with their dual space both in the finite-dimensional and infinite-dimensional case. It is specifically designed to ease the types of calculations that frequently come up in quantum mechanics. Its use in quantum mechanics is quite widespread.

In theoretical physics, a Feynman diagram is a pictorial representation of the mathematical expressions describing the behavior and interaction of subatomic particles. The scheme is named after American physicist Richard Feynman, who introduced the diagrams in 1948. The interaction of subatomic particles can be complex and difficult to understand; Feynman diagrams give a simple visualization of what would otherwise be an arcane and abstract formula. According to David Kaiser, "Since the middle of the 20th century, theoretical physicists have increasingly turned to this tool to help them undertake critical calculations. Feynman diagrams have revolutionized nearly every aspect of theoretical physics." While the diagrams are applied primarily to quantum field theory, they can also be used in other areas of physics, such as solid-state theory. Frank Wilczek wrote that the calculations that won him the 2004 Nobel Prize in Physics "would have been literally unthinkable without Feynman diagrams, as would [Wilczek's] calculations that established a route to production and observation of the Higgs particle."

The Riesz representation theorem, sometimes called the Riesz–Fréchet representation theorem after Frigyes Riesz and Maurice René Fréchet, establishes an important connection between a Hilbert space and its continuous dual space. If the underlying field is the real numbers, the two are isometrically isomorphic; if the underlying field is the complex numbers, the two are isometrically anti-isomorphic. The (anti-) isomorphism is a particular natural isomorphism.

In particle physics, the Dirac equation is a relativistic wave equation derived by British physicist Paul Dirac in 1928. In its free form, or including electromagnetic interactions, it describes all spin-1/2 massive particles, called "Dirac particles", such as electrons and quarks for which parity is a symmetry. It is consistent with both the principles of quantum mechanics and the theory of special relativity, and was the first theory to account fully for special relativity in the context of quantum mechanics. It was validated by accounting for the fine structure of the hydrogen spectrum in a completely rigorous way. It has become vital in the building of the Standard Model.

In quantum physics, a wave function is a mathematical description of the quantum state of an isolated quantum system. The most common symbols for a wave function are the Greek letters ψ and Ψ. Wave functions are complex-valued. For example, a wave function might assign a complex number to each point in a region of space. The Born rule provides the means to turn these complex probability amplitudes into actual probabilities. In one common form, it says that the squared modulus of a wave function that depends upon position is the probability density of measuring a particle as being at a given place. The integral of a wavefunction's squared modulus over all the system's degrees of freedom must be equal to 1, a condition called normalization. Since the wave function is complex-valued, only its relative phase and relative magnitude can be measured; its value does not, in isolation, tell anything about the magnitudes or directions of measurable observables. One has to apply quantum operators, whose eigenvalues correspond to sets of possible results of measurements, to the wave function ψ and calculate the statistical distributions for measurable quantities.

In mathematics, a self-adjoint operator on a complex vector space V with inner product is a linear map A that is its own adjoint. That is, for all ∊ V. If V is finite-dimensional with a given orthonormal basis, this is equivalent to the condition that the matrix of A is a Hermitian matrix, i.e., equal to its conjugate transpose A^∗. By the finite-dimensional spectral theorem, V has an orthonormal basis such that the matrix of A relative to this basis is a diagonal matrix with entries in the real numbers. This article deals with applying generalizations of this concept to operators on Hilbert spaces of arbitrary dimension.

The Klein–Gordon equation is a relativistic wave equation, related to the Schrödinger equation. It is second-order in space and time and manifestly Lorentz-covariant. It is a differential equation version of the relativistic energy–momentum relation .

An operator is a function over a space of physical states onto another space of states. The simplest example of the utility of operators is the study of symmetry. Because of this, they are useful tools in classical mechanics. Operators are even more important in quantum mechanics, where they form an intrinsic part of the formulation of the theory.

Second quantization, also referred to as occupation number representation, is a formalism used to describe and analyze quantum many-body systems. In quantum field theory, it is known as canonical quantization, in which the fields are thought of as field operators, in a manner similar to how the physical quantities are thought of as operators in first quantization. The key ideas of this method were introduced in 1927 by Paul Dirac, and were later developed, most notably, by Pascual Jordan and Vladimir Fock. In this approach, the quantum many-body states are represented in the Fock state basis, which are constructed by filling up each single-particle state with a certain number of identical particles. The second quantization formalism introduces the creation and annihilation operators to construct and handle the Fock states, providing useful tools to the study of the quantum many-body theory.

In physics, the S-matrix or scattering matrix is a matrix which relates the initial state and the final state of a physical system undergoing a scattering process. It is used in quantum mechanics, scattering theory and quantum field theory (QFT).

The representation theory of groups is a part of mathematics which examines how groups act on given structures.

In quantum information theory, a quantum channel is a communication channel which can transmit quantum information, as well as classical information. An example of quantum information is the general dynamics of a qubit. An example of classical information is a text document transmitted over the Internet.

In physics, a sigma model is a field theory that describes the field as a point particle confined to move on a fixed manifold. This manifold can be taken to be any Riemannian manifold, although it is most commonly taken to be either a Lie group or a symmetric space. The model may or may not be quantized. An example of the non-quantized version is the Skyrme model; it cannot be quantized due to non-linearities of power greater than 4. In general, sigma models admit (classical) topological soliton solutions, for example, the skyrmion for the Skyrme model. When the sigma field is coupled to a gauge field, the resulting model is described by Ginzburg–Landau theory. This article is primarily devoted to the classical field theory of the sigma model; the corresponding quantized theory is presented in the article titled "non-linear sigma model".

In mathematics, and in particular functional analysis, the tensor product of Hilbert spaces is a way to extend the tensor product construction so that the result of taking a tensor product of two Hilbert spaces is another Hilbert space. Roughly speaking, the tensor product is the metric space completion of the ordinary tensor product. This is an example of a topological tensor product. The tensor product allows Hilbert spaces to be collected into a symmetric monoidal category.

LOCC, or local operations and classical communication, is a method in quantum information theory where a local (product) operation is performed on part of the system, and where the result of that operation is "communicated" classically to another part where usually another local operation is performed conditioned on the information received.

In quantum mechanics, for systems where the total number of particles may not be preserved, the number operator is the observable that counts the number of particles.

Wigner's theorem, proved by Eugene Wigner in 1931, is a cornerstone of the mathematical formulation of quantum mechanics. The theorem specifies how physical symmetries such as rotations, translations, and CPT transformations are represented on the Hilbert space of states.

Coherent states have been introduced in a physical context, first as quasi-classical states in quantum mechanics, then as the backbone of quantum optics and they are described in that spirit in the article Coherent states. However, they have generated a huge variety of generalizations, which have led to a tremendous amount of literature in mathematical physics. In this article, we sketch the main directions of research on this line. For further details, we refer to several existing surveys.

In mathematical physics, Clebsch–Gordan coefficients are the expansion coefficients of total angular momentum eigenstates in an uncoupled tensor product basis. Mathematically, they specify the decomposition of the tensor product of two irreducible representations into a direct sum of irreducible representations, where the type and the multiplicities of these irreducible representations are known abstractly. The name derives from the German mathematicians Alfred Clebsch (1833–1872) and Paul Gordan (1837–1912), who encountered an equivalent problem in invariant theory.

Distributional data analysis is a branch of nonparametric statistics that is related to functional data analysis. It is concerned with random objects that are probability distributions, i.e., the statistical analysis of samples of random distributions where each atom of a sample is a distribution. One of the main challenges in distributional data analysis is that although the space of probability distributions is a convex space, it is not a vector space.

References

External links

• Feynman diagrams and Wick products associated with q-Fock space - noncommutative analysis, Edward G. Effros and Mihai Popa, Department of Mathematics, UCLA
• R. Geroch, Mathematical Physics, Chicago University Press, Chapter 21.