District cooling

Last updated
Chillers in a district cooling at University of Rochester in Rochester, New York Chillers in a district cooling.jpg
Chillers in a district cooling at University of Rochester in Rochester, New York

District cooling is the cooling equivalent of district heating. Working on broadly similar principles to district heating, district cooling delivers chilled water to buildings like offices and factories. In winter, the source for cooling can often be seawater, so it is a cheaper resource than electricity to run compressors for cooling. Alternatively, district cooling can be provided by a Heat Sharing Network which enables each building on the circuit to use a heat pump to redirect heat to an ambient ground temperature circuit. [1]

Contents

There are also 5th generation district heating and cooling systems (so called cold district heating networks) that are able to provide both heating and cooling simultaneously. In these systems the waste heat from chillers can be recycled and used for space heating or hot water production. [2]

Applications

Canada

In sept 2004, Enwave Energy Corporation, a district energy company based in Toronto, Ontario, Canada, started operating a system that uses water from Lake Ontario to cool downtown buildings, including office towers, the Metro Toronto Convention Centre, a small brewery and a telecommunications centre. The process has become known as Deep Lake Water Cooling (DLWC). It will provide for over 40,000 tons (140  MW) of cooling—a significantly larger system than has been installed elsewhere. Another feature of the Enwave system is that it is integrated with Toronto's drinking water supply. The Toronto drinking water supply required a new intake location that would be further from shore and deeper in the lake. This posed two problems for the utility that managed the city's drinking water supply:

1. The capital cost of moving the water intake location.

2. The new location would supply water that was so cold it would require heating before it could be distributed.

The cooperation of the district cooling agency, Enwave, solved both problems: Enwave paid for the cost of moving the water intake and also supplied the heat to warm the drinking water supply to acceptable levels by effectively extracting the heat from the buildings it served. Contact between drinking water and the Enwave cooling system is restricted to thermal contact in a heat exchanger. Drinking water does not circulate through the Enwave cooling systems. [ citation needed ]

France

The "Cold Network of Paris" has existed in the city since 1991. The eight production facilities (400 MW) provide cooling to 500 clients for 412 GWh per year. This network is completely managed by Climespace. Since 2002, two other production facilities have provided cooling reinforced by ice, in the cooling centers of Opéra/Galfa; they have a total cooling capacity of about 20,000 kWh. [3] Paris also proposes to develop its cold network as part of its climate change plan. [4] As part of the city's climate change plan, two "glaciers" were integrated into the network in 2006 at the Les Halles cooling center, which has a total cooling capacity of about 30,000 kWh: 44 MW come from cooling machines and 13 MW can be added during short periods to the Cold Network of Paris thanks to stocks of ice. Enertherm, located at La Défense, has the largest ice stock in Europe, with a capacity of 240 MWh. [5]

Lyon also has a cold network, managed by Dalkia, which bought the network from Prodith. [6]

Finland

The Helsinki district cooling system uses otherwise wasted heat from summer time CHP power generation units to run absorption refrigerators for cooling during summer time, greatly reducing electricity usage. In winter time, cooling is achieved more directly using sea water. The adoption of district cooling is estimated to reduce the consumption of electricity for cooling purposes by as much as 90 per cent and an exponential growth in usage is forecast. [7] The idea is now being adopted in other Finnish cities.

Germany

In Germany, amongst other projects, Munich established a rapidly growing system in 2011 with its core below the Karlsplatz (Stachus), drawing water from the underground Stadtgrabenbach. There is a 24 km network, currently supplying 16 larger organizations. [8] [9] In 2011, the estimated total thermal power output of all district cooling systems in Germany was 160 Megawatt distributed over 90 km. [10]

India

India's first district cooling system is operational in GIFT City (Gujarat International Finance Tec-City in Gujarat. [11] ). Currently ~10,000 TR capacity is operational which has capacity to upgrade up to 50000 TR. [12]

Kuwait

A project started in 2012 in Kuwait for the Sabah Al-Salem University City with district cooling. It is capable of cooling a load of 72000 TR and it has two central utility plants with 36 chillers, 36 cooling towers and 2 TES (Thermal Energy Storage) tanks.[ citation needed ]

Netherlands

In 2006, a district cooling system came online in Amsterdam's Zuidas, drawing water from the Nieuwe Meer [13] [14]

Qatar

On November 9, 2010, the world's largest district cooling plant opened at The Pearl Island. This plant is owned and operated by Qatar District Cooling Company Qatar Cool. It is capable of cooling a load of 130,000 tons (450  MW). [15] The project was built by C.A.T International (part of C.A.T Group). [16]

The Lusail City district cooling system will supply chilled water to end users through an integrated network with a connected cooling of 500,000 Tons of Refrigeration by utilizing multiple chiller plants which are Marina, Wadi, West and North.

Singapore

Singapore started district cooling with One Raffles Quay, located at Marina Bay in May 2006. [17] The district cooling plant is operated by SP Group's subsidiary, Singapore District Cooling. [17] A second district cooling plant was commissioned in May 2010, [17] which will supply chilled water for the air-conditioning of buildings in the area through pipes housed within the Common Services Tunnel in Marina Bay. The second district cooling plant started operations on 3 March 2016. [18]

Tengah, a planning area and Housing and Development Board (HDB) town, will be the first residential area in Singapore to have a large-scale centralized cooling system. Centralized chillers installed on the rooftops of some HDB flats pipe chilled water directly to individual units for use in air-conditioners. [19]

Sweden

The use of district cooling is growing in Sweden, such as in Stockholm, whose cooling system has 71,000 TR. [20]

Switzerland

Working since 1985, the system of the École Polytechnique Fédérale de Lausanne combines, depending on the needs, cooling and heat extraction. This allows for a higher overall energy efficiency of the 19  MW system. [21]

In 2009, a district cooling system was installed in the United Nations area of Geneva, drawing water from Lake Geneva. The system is in the process of being expanded to other areas of Geneva. [22]

United Arab Emirates

Emirates District Cooling (Emicool) is a district cooling service provider and a wholly-owned subsidiary of Dubai Investments headquartered in Dubai investments park. It currently has 355,000 tonnes of refrigeration (TR) capacity that connects more than 2,200 buildings in the UAE. It is a member of the Dubai Supreme Council of Energy's first Association of District Cooling Operators. [23] [24] [25] [26] [27]

Tabreed, headquartered in the UAE capital of Abu Dhabi, currently delivers more than 1.2 million refrigeration tons of cooling, from its portfolio of 86 plants located throughout the region. The company, founded in 1998, provides sustainable cooling to iconic infrastructure projects such as the Burj Khalifa, Sheikh Zayed Grand Mosque, Louvre Abu Dhabi, Cleveland Clinic, Ferrari World, The Dubai Mall, Yas Mall, Aldar HQ, Etihad Towers, Marina Mall, World Trade Center in Abu Dhabi, Dubai Metro, Bahrain Financial Harbor, and the Jabal Omar Development in the Holy City of Mecca, alongside many more hotels, hospitals, residential and commercial towers. During 2022 Tabreed entered the Egyptian market and expanded its operations in the Sultanate of Oman.[ citation needed ]

In January 2006, PAL technology is one of the emerging project management companies in UAE involved in the diversified business of desalination, sewage treatment and district cooling system. More than 400,000 Tons (1400  MW) of district cooling projects are planned. The Palm Jumeirah utilises district cooling supplied by Palm Utilities LLC to provide air conditioning for buildings on the trunk and crescent of the Palm. The Dubai Metro system, inaugurated in 2009, is the first mass transit network in the world to use district cooling to lower temperatures in stations. [28]

United States

A district cooling plant at Bowling Green State University Chiller Plant Exterior.jpg
A district cooling plant at Bowling Green State University

Cornell University's Lake Source Cooling System uses Cayuga Lake as a heat sink to operate the central chilled water system for its campus and to also provide cooling to the Ithaca City School District. The system has operated since the summer of 2000 and was built at a cost of $55–60 million. It cools a 14,500 tons (50  MW) load.

Cold storage

If the other renewable alternatives are too warm during the summer or too expensive, cold storage can be investigated. In large scale applications underground and snow storage are the most likely alternatives. In an underground storage the winter cold is heat exchanged from the air and loaded into the bedrock or an aquifer by one or more bore holes. In a snow storage frozen water (snow and/or ice) is saved in some kind of storage (pile, pit, cavern etc.). The cold is utilized by pumping melt water to the cooling object, directly in a district cooling system or indirect by a heat exchanger.

The lukewarm melt water is then pumped back to the snow where it gets cooled and mixed with new melt water. Snow cooling works as a single cold source but can also be used for peak cooling since there is no relevant cooling limit. [29] [30] In Sweden there is one snow cooling plant in Sundsvall, built and owned by the county. The cooling load in Sundsvall is about 2000 kW (570 tons of refrigeration) and 1500 MWh/year. [31]

Dehumidifying

Especially in subtropical regions not only cooling, but dehumidifying of the air becomes important. Liquid desiccant [32] cooling allows to generate remotely and efficiently a moisture absorbing liquid. This liquid can be pumped or transported long distances without energy loss. [33]

Benefits

Digital Combat Simulator (DCS) consumes 35 percent to 20 percent less electricity as compared to traditional air-cooled air-conditioning systems and individual water-cooled air-conditioning systems using cooling towers respectively. With its high energy efficiency, the implementation of DCS at Kids These Days (KTD) will achieve estimated annual saving of 85 million kilowatt-hour (kWh) in electricity consumption, with a corresponding reduction of 59,500 tonnes of carbon dioxide emissions annually.

Apart from energy saving, DCS would also bring along the following benefits to the consumers:

  1. Reduction in upfront capital cost for installing chiller plants at their buildings which account for about 5-10% of the total building cost.
  2. More flexible building designs for consumer buildings as they do not need to install their own chillers and the associated electrical equipment in their buildings.
  3. Mitigation of heat island effects in KTD and elimination of noise and vibration arising from the operation of heat rejection equipment and chillers of air-conditioning plants in buildings as such equipment will no longer be necessary for buildings subscribing to district cooling services.
  4. More adaptable air-conditioning system to the varying demand as compared to individual air-conditioning systems. For each individual building, cooling capacity can be increased by requesting additional cooling capacity from the DCS without carrying out extensive modification works for the building in question. [34]

See also

Related Research Articles

<span class="mw-page-title-main">Power station</span> Facility generating electric power

A power station, also referred to as a power plant and sometimes generating station or generating plant, is an industrial facility for the generation of electric power. Power stations are generally connected to an electrical grid.

<span class="mw-page-title-main">Solar thermal energy</span> Technology using sunlight for heat

Solar thermal energy (STE) is a form of energy and a technology for harnessing solar energy to generate thermal energy for use in industry, and in the residential and commercial sectors. Solar thermal collectors are classified by the United States Energy Information Administration as low-, medium-, or high-temperature collectors. Low-temperature collectors are generally unglazed and used to heat swimming pools or to heat ventilation air. Medium-temperature collectors are also usually flat plates but are used for heating water or air for residential and commercial use.

<span class="mw-page-title-main">Cogeneration</span> Simultaneous generation of electricity and useful heat

Cogeneration or combined heat and power (CHP) is the use of a heat engine or power station to generate electricity and useful heat at the same time.

<span class="mw-page-title-main">Chiller</span> Machine that removes heat from a liquid coolant via vapor compression

A chiller is a machine that removes heat from a liquid coolant via a vapor-compression, adsorption refrigeration, or absorption refrigeration cycles. This liquid can then be circulated through a heat exchanger to cool equipment, or another process stream. As a necessary by-product, refrigeration creates waste heat that must be exhausted to ambience, or for greater efficiency, recovered for heating purposes. Vapor compression chillers may use any of a number of different types of compressors. Most common today are the hermetic scroll, semi-hermetic screw, or centrifugal compressors. The condensing side of the chiller can be either air or water cooled. Even when liquid cooled, the chiller is often cooled by an induced or forced draft cooling tower. Absorption and adsorption chillers require a heat source to function.

<span class="mw-page-title-main">Central heating</span> Type of heating system

A central heating system provides warmth to a number of spaces within a building from one main source of heat. It is a component of heating, ventilation, and air conditioning systems, which can both cool and warm interior spaces.

<span class="mw-page-title-main">Enwave</span>

Enwave Energy Corporation is a Canadian multinational energy company based in Toronto that focuses on sustainable district energy including heating, cooling, hot water, combined heat and power, and geothermal energy systems. It is one of the largest district energy systems in North America and has been referred as the leading energy district system with 17 heating plants, 21 chilled water plants and ice on coil storage tanks. It serves over 700 customers including commercial properties, developers, municipalities, health care, educational centres and residential units.

<span class="mw-page-title-main">District heating</span> Centralized heat distribution system

District heating is a system for distributing heat generated in a centralized location through a system of insulated pipes for residential and commercial heating requirements such as space heating and water heating. The heat is often obtained from a cogeneration plant burning fossil fuels or biomass, but heat-only boiler stations, geothermal heating, heat pumps and central solar heating are also used, as well as heat waste from factories and nuclear power electricity generation. District heating plants can provide higher efficiencies and better pollution control than localized boilers. According to some research, district heating with combined heat and power (CHPDH) is the cheapest method of cutting carbon emissions, and has one of the lowest carbon footprints of all fossil generation plants.

<span class="mw-page-title-main">Peaking power plant</span> Reserved for high demand times

Peaking power plants, also known as peaker plants, and occasionally just "peakers", are power plants that generally run only when there is a high demand, known as peak demand, for electricity. Because they supply power only occasionally, the power supplied commands a much higher price per kilowatt hour than base load power. Peak load power plants are dispatched in combination with base load power plants, which supply a dependable and consistent amount of electricity, to meet the minimum demand.

<span class="mw-page-title-main">Thermal energy storage</span> Technologies to store thermal energy

Thermal energy storage (TES) is the storage of thermal energy for later reuse. Employing widely different technologies, it allows surplus thermal energy to be stored for hours, days, or months. Scale both of storage and use vary from small to large – from individual processes to district, town, or region. Usage examples are the balancing of energy demand between daytime and nighttime, storing summer heat for winter heating, or winter cold for summer cooling. Storage media include water or ice-slush tanks, masses of native earth or bedrock accessed with heat exchangers by means of boreholes, deep aquifers contained between impermeable strata; shallow, lined pits filled with gravel and water and insulated at the top, as well as eutectic solutions and phase-change materials.

Solar air conditioning, or "solar-powered air conditioning", refers to any air conditioning (cooling) system that uses solar power.

<span class="mw-page-title-main">Air source heat pump</span> Most common type of heat pump

An air source heat pump (ASHP) is a heat pump that can absorb heat from air outside a building and release it inside; it uses the same vapor-compression refrigeration process and much the same equipment as an air conditioner, but in the opposite direction. ASHPs are the most common type of heat pump and, usually being smaller, tend to be used to heat individual houses or flats rather than blocks, districts or industrial processes.

<span class="mw-page-title-main">Air conditioning</span> Cooling of air in an enclosed space

Air conditioning, often abbreviated as A/C (US) or air con (UK), is the process of removing heat from an enclosed space to achieve a more comfortable interior temperature and in some cases also strictly controlling the humidity of internal air. Air conditioning can be achieved using a mechanical 'air conditioner' or by other methods, including passive cooling and ventilative cooling. Air conditioning is a member of a family of systems and techniques that provide heating, ventilation, and air conditioning (HVAC). Heat pumps are similar in many ways to air conditioners, but use a reversing valve to allow them both to heat and to cool an enclosed space.

<span class="mw-page-title-main">Fan coil unit</span> HVAC device

A fan coil unit (FCU), also known as a Vertical Fan Coil Unit (VFCU), is a device consisting of a heat exchanger (coil) and a fan. FCUs are commonly used in HVAC systems of residential, commercial, and industrial buildings that use ducted split air conditioning or central plant cooling. FCUs are typically connected to ductwork and a thermostat to regulate the temperature of one or more spaces and to assist the main air handling unit for each space if used with chillers. The thermostat controls the fan speed and/or the flow of water or refrigerant to the heat exchanger using a control valve.

Deep water source cooling (DWSC) or deep water air cooling is a form of air cooling for process and comfort space cooling which uses a large body of naturally cold water as a heat sink. It uses water at 4 to 10 degrees Celsius drawn from deep areas within lakes, oceans, aquifers or rivers, which is pumped through the one side of a heat exchanger. On the other side of the heat exchanger, cooled water is produced.

<span class="mw-page-title-main">Chilled water</span> Cooling commodity

Chilled water is a commodity often used to cool a building's air and equipment, especially in situations where many individual rooms must be controlled separately, such as a hotel. The chilled water can be supplied by a vendor, such as a public utility, or created at the location of the building that will use it, which has been the norm.

Free cooling is an economical method of using low external air temperatures to assist in chilling water, which can then be used for industrial processes, or air conditioning systems. The chilled water can either be used immediately or be stored for the short- or long-term. When outdoor temperatures are lower relative to indoor temperatures, this system utilizes the cool outdoor air as a free cooling source. In this manner, the system replaces the chiller in traditional air conditioning systems while achieving the same cooling result. Such systems can be made for single buildings or district cooling networks.

<span class="mw-page-title-main">Trane</span> Subsidiary manufacturer of HVAC systems

Trane is a manufacturer of heating, ventilation, and air conditioning (HVAC) systems, along with building management systems and controls. The company is a subsidiary of Trane Technologies, a company focused on manufacturing HVAC and refrigeration systems. Trane employs more than 29,000 people at 104 manufacturing locations in 28 countries, and has annual sales of more than US$8 billion.

<span class="mw-page-title-main">Ice storage air conditioning</span>

Ice storage air conditioning is the process of using ice for thermal energy storage. The process can reduce energy used for cooling during times of peak electrical demand. Alternative power sources such as solar can also use the technology to store energy for later use. This is practical because of water's large heat of fusion: one metric ton of water can store 334 megajoules (MJ) of energy, equivalent to 93 kWh.

<span class="mw-page-title-main">Cold district heating</span> District heating with very low temperatures

Cold district heating is a technical variant of a district heating network that operates at low transmission temperatures well below those of conventional district heating systems and can provide both space heating and cooling. Transmission temperatures in the range of approx. 10 to 25 °C are common, allowing different consumers to heat and cool simultaneously and independently of each other. Hot water is produced and the building heated by water heat pumps, which obtain their thermal energy from the heating network, while cooling can be provided either directly via the cold heat network or, if necessary, indirectly via chillers. Cold local heating is sometimes also referred to as an anergy network. The collective term for such systems in scientific terminology is 5th generation district heating and cooling. Due to the possibility of being operated entirely by renewable energies and at the same time contributing to balancing the fluctuating production of wind turbines and photovoltaic systems, cold local heating networks are considered a promising option for a sustainable, potentially greenhouse gas and emission-free heat supply.

<span class="mw-page-title-main">Deep Lake Water Cooling System</span> Water and air cooling project in Toronto, Canada

The Deep Lake Water Cooling System or DLWC is a deep water source cooling project in Toronto, Canada. As a renewable energy project, it involves running cold water from Lake Ontario to air-conditioned buildings located in downtown Toronto.

References

  1. ↑ "District Cooling Networks: using groundwater to heat or cool buildings with heat pumps" . Retrieved 2017-10-26.
  2. ↑ Simone Buffa; et al. (2019), "5th generation district heating and cooling systems: A review of existing cases in Europe" (PDF), Renewable and Sustainable Energy Reviews , vol. 104, pp. 504–522, doi: 10.1016/j.rser.2018.12.059
  3. ↑ Poeuf P (2007) Réseau de froid parisien: Une alimentation renforcée grâce au stockage de glace. Chauffage, ventilation, conditionnement d'air, (847), 9-11 (notice Inist-CNRS Archived 2014-09-03 at the Wayback Machine ).
  4. ↑ de Paris, C. (2007). plan climat de paris. Annexe de la délibération DEVE Archived 2014-09-03 at the Wayback Machine , 116.
  5. ↑ "Courbevoie - Stockage de glace / Médiathèque / L'entreprise - Enertherm - Concessionnaire du réseau de chaleur et d'eau glacée de la défense". www.enertherm.fr. Archived from the original on 2015-08-16. Retrieved 2016-01-04.
  6. ↑ DUPERRAY, C. (1999). Un exemple industriel de stockage appliqué au réseau de climatisation urbaine: Prodith à Lyon. Chauffage, ventilation, conditionnement d'air, (9), 25-27.
  7. ↑ Archived February 2, 2008, at the Wayback Machine
  8. ↑ "Fernkälte - das kalte Herz von München". 16 May 2017.
  9. ↑ "Stadtwerke München (SWM): Ihr regionaler Energieversorger".
  10. ↑ "Immer mehr Städte setzen auf Fernkälte". swp.de (in German). Neue Pressegesellschaft mbH & Co. KG. 31 July 2013. Archived from the original on 21 February 2020. Retrieved 21 February 2020.
  11. ↑ "GIFT City in Gujarat - Ten remarkable infrastructure developments in India - The Economic Times".
  12. ↑ "REHVA Journal 01/2018 - India's First District Cooling System at GIFT City".
  13. ↑ Lake water air conditioning cuts CO2 emissions by 70% compared to conventional cooling Archived November 18, 2009, at the Wayback Machine
  14. ↑ "District cooling in Amsterdam's Zuidas" (PDF). Archived from the original (PDF) on 2011-10-05. Retrieved 2011-09-25.
  15. ↑ "World's largest district cooling plant opens at The Pearl Qatar". Gulf-times.com. Archived from the original on 2012-09-24. Retrieved 2011-09-25.
  16. ↑ "FlowCon Project | Qatar Pearl, Qatar". flowcon.com. Retrieved 2021-09-29.
  17. 1 2 3 "Cooling & Heating". SP Group. Archived from the original on 3 September 2018. Retrieved 14 August 2019.
  18. ↑ "World's biggest underground district cooling network now at Marina Bay" . Retrieved 14 August 2019.
  19. ↑ Auto, Hermes (2020-10-19). "Nearly 1,000 households in Tengah sign up for centralised cooling system | The Straits Times". www.straitstimes.com. Retrieved 2022-04-20.
  20. ↑ "FVB Energy Inc. - District Cooling Development in Stockholm". FVB Energy Inc. Retrieved 2024-01-16.
  21. ↑ "Real Estate and Infrastructures Department, EPFL" . Retrieved 2013-12-23.
  22. ↑ "SIG. Using lake water to heat or cool". Archived from the original on 2020-04-22. Retrieved 2015-10-26.
  23. ↑ "Emicool starts phased implementation of remote processes". www.tradearabia.com.
  24. ↑ Staff Reporter. "Emicool announces 7% discount on bills for the next 3 months across all sectors". Khaleej Times.
  25. ↑ "Emicool". www.dubaiinvestments.com.
  26. ↑ "Emicool becomes active member of Association of District Cooling Operators; supports efficient district cooling". wam. 13 October 2020.
  27. ↑ "Emicool starts reducing fuel surcharges on electricity, water bills". english.mubasher.info. 9 December 2020.
  28. ↑ Hope, Gerhard. "District cooling world first for Dubai Metro - ConstructionWeekOnline.com". www.constructionweekonline.com.
  29. ↑ "Simple search" (PDF).
  30. ↑ "Cooling water treatment".
  31. ↑ "The Sundsvall snowcooling plant - large scale snowcooling | Snowpower". Snowpower.se. Archived from the original on 2012-04-02. Retrieved 2011-09-25.
  32. ↑ The Dehumidification Handbook. Munters Corporation. 2002. ISBN   0-9717887-0-7.
  33. ↑ "L-DCS in District Cooling Systems". Archived from the original on 2012-05-04.
  34. ↑ "Introduction (734)". www.emsd.gov.hk. Archived from the original on 2021-10-26. Retrieved 2021-08-16.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.