Filters
Filters allow Log Events to be evaluated to determine if or how they should be published. A Filter will be called on one of its filter methods and will return a Result, which is an Enum that has one of 3 values - ACCEPT, DENY or NEUTRAL.
Filters may be configured in one of four locations:
- Context-wide Filters are configured directly in the configuration. Events that are rejected by these filters will not be passed to loggers for further processing. Once an event has been accepted by a Context-wide filter it will not be evaluated by any other Context-wide Filters nor will the Logger's Level be used to filter the event. The event will be evaluated by Logger and Appender Filters however.
- Logger Filters are configured on a specified Logger. These are evaluated after the Context-wide Filters and the Log Level for the Logger. Events that are rejected by these filters will be discarded and the event will not be passed to a parent Logger regardless of the additivity setting.
- Appender Filters are used to determine if a specific Appender should handle the formatting and publication of the event.
- Appender Reference Filters are used to determine if a Logger should route the event to an appender.
BurstFilter
The BurstFilter provides a mechanism to control the rate at which LogEvents are processed by silently discarding events after the maximum limit has been reached.
Parameter Name | Type | Description |
---|---|---|
level | String | Level of messages to be filtered. Anything at or below this level will be
filtered out if maxBurst has been exceeded. The default is
WARN meaning any messages that are higher than warn will be logged
regardless of the size of a burst.
|
rate | float | The average number of events per second to allow. |
maxBurst | integer | The maximum number of events that can occur before events are filtered for exceeding the average rate. The default is 10 times the rate. |
onMatch | String | Action to take when the filter matches. May be ACCEPT, DENY or NEUTRAL. The default value is NEUTRAL. |
onMismatch | String | Action to take when the filter does not match. May be ACCEPT, DENY or NEUTRAL. The default value is DENY. |
A configuration containing the BurstFilter might look like:
<?xml version="1.0" encoding="UTF-8"?> <Configuration status="warn" name="MyApp"> <Appenders> <RollingFile name="RollingFile" fileName="logs/app.log" filePattern="logs/app-%d{MM-dd-yyyy}.log.gz"> <BurstFilter level="INFO" rate="16" maxBurst="100"/> <PatternLayout> <pattern>%d %p %c{1.} [%t] %m%n</pattern> </PatternLayout> <TimeBasedTriggeringPolicy /> </RollingFile> </Appenders> <Loggers> <Root level="error"> <AppenderRef ref="RollingFile"/> </Root> </Loggers> </Configuration>
CompositeFilter
The CompositeFilter provides a way to specify more than one filter. It is added to the configuration as a filters element and contains other filters to be evaluated. The filters element accepts no parameters.
A configuration containing the CompositeFilter might look like:
<?xml version="1.0" encoding="UTF-8"?> <Configuration status="warn" name="MyApp"> <Filters> <MarkerFilter marker="EVENT" onMatch="ACCEPT" onMismatch="NEUTRAL"/> <DynamicThresholdFilter key="loginId" defaultThreshold="ERROR" onMatch="ACCEPT" onMismatch="NEUTRAL"> <KeyValuePair key="User1" value="DEBUG"/> </DynamicThresholdFilter> </Filters> <Appenders> <File name="Audit" fileName="logs/audit.log"> <PatternLayout> <pattern>%d %p %c{1.} [%t] %m%n</pattern> </PatternLayout> </File> <RollingFile name="RollingFile" fileName="logs/app.log" filePattern="logs/app-%d{MM-dd-yyyy}.log.gz"> <BurstFilter level="INFO" rate="16" maxBurst="100"/> <PatternLayout> <pattern>%d %p %c{1.} [%t] %m%n</pattern> </PatternLayout> <TimeBasedTriggeringPolicy /> </RollingFile> </Appenders> <Loggers> <Logger name="EventLogger" level="info"> <AppenderRef ref="Audit"/> </Logger> <Root level="error"> <AppenderRef ref="RollingFile"/> </Root> </Loggers> </Configuration>
DynamicThresholdFilter
The DynamicThresholdFilter allows filtering by log level based on specific attributes. For example, if the user's loginId is being captured in the ThreadContext Map then it is possible to enable debug logging for only that user. If the log event does not contain the specified ThreadContext item NEUTRAL will be returned.
Parameter Name | Type | Description |
---|---|---|
key | String | The name of the item in the ThreadContext Map to compare. |
defaultThreshold | String | Level of messages to be filtered. The default threshold only applies if the log event contains the specified ThreadContext Map item and its value does not match any key in the key/value pairs. |
keyValuePair | KeyValuePair[] | One or more KeyValuePair elements that define the matching value for the key and the Level to evaluate when the key matches. |
onMatch | String | Action to take when the filter matches. May be ACCEPT, DENY or NEUTRAL. The default value is NEUTRAL. |
onMismatch | String | Action to take when the filter does not match. May be ACCEPT, DENY or NEUTRAL. The default value is DENY. |
Here is a sample configuration containing the DynamicThresholdFilter:
<?xml version="1.0" encoding="UTF-8"?> <Configuration status="warn" name="MyApp" > <DynamicThresholdFilter key="loginId" defaultThreshold="ERROR" onMatch="ACCEPT" onMismatch="NEUTRAL"> <KeyValuePair key="User1" value="DEBUG"/> </DynamicThresholdFilter> <Appenders> <RollingFile name="RollingFile" fileName="logs/app.log" filePattern="logs/app-%d{MM-dd-yyyy}.log.gz"> <BurstFilter level="INFO" rate="16" maxBurst="100"/> <PatternLayout> <pattern>%d %p %c{1.} [%t] %m%n</pattern> </PatternLayout> <TimeBasedTriggeringPolicy /> </RollingFile> </Appenders> <Loggers> <Root level="error"> <AppenderRef ref="RollingFile"/> </Root> </Loggers> </Configuration>
LevelRangeFilter
LevelRangeFilter
allows filtering against a level range, where levels get compared by their associated integral values; OFF
has an integral value of 0, FATAL
100, ERROR
200, and so on.
Parameter Name | Type | Description |
---|---|---|
minLevel |
Level |
the minimum level threshold (defaults to OFF , which has an integral value of 0) |
maxLevel |
Level |
the maximum level threshold (defaults to ALL , which has an integral value of Integer.MAX_VALUE ) |
onMatch |
Filter.Result |
the result to return on a match, where allowed values are ACCEPT , DENY or NEUTRAL (default) |
onMismatch |
Filter.Result |
the result to return on a mismatch, where allowed values are ACCEPT , DENY (default) or NEUTRAL |
In the following example configuration, a LevelRangeFilter
is configured with maxLevel
set to INFO
.
The filter will return onMismatch
result (i.e., DENY
, the default) for log events of level with higher integral values than INFO
; i.e., DEBUG
, TRACE
, etc.
<?xml version="1.0" encoding="UTF-8"?> <Configuration status="WARN" name="MyApp"> <Appenders> <Console name="STDOUT"> <LevelRangeFilter maxLevel="INFO"/> <PatternLayout pattern="%d %p %c{1.} [%t] %m%n"/> </Console> </Appenders> <Loggers> <Root level="ERROR"> <AppenderRef ref="STDOUT"/> </Root> </Loggers> </Configuration>
MapFilter
The MapFilter allows filtering against data elements that are in a MapMessage.
Parameter Name | Type | Description |
---|---|---|
keyValuePair | KeyValuePair[] | One or more KeyValuePair elements that define the key in the map and the value to match on. If the same key is specified more than once then the check for that key will automatically be an "or" since a Map can only contain a single value. |
operator | String | If the operator is "or" then a match by any one of the key/value pairs will be considered to be a match, otherwise all the key/value pairs must match. |
onMatch | String | Action to take when the filter matches. May be ACCEPT, DENY or NEUTRAL. The default value is NEUTRAL. |
onMismatch | String | Action to take when the filter does not match. May be ACCEPT, DENY or NEUTRAL. The default value is DENY. |
As in this configuration, the MapFilter can be used to log particular events:
<?xml version="1.0" encoding="UTF-8"?> <Configuration status="warn" name="MyApp"> <MapFilter onMatch="ACCEPT" onMismatch="NEUTRAL" operator="or"> <KeyValuePair key="eventId" value="Login"/> <KeyValuePair key="eventId" value="Logout"/> </MapFilter> <Appenders> <RollingFile name="RollingFile" fileName="logs/app.log" filePattern="logs/app-%d{MM-dd-yyyy}.log.gz"> <BurstFilter level="INFO" rate="16" maxBurst="100"/> <PatternLayout> <pattern>%d %p %c{1.} [%t] %m%n</pattern> </PatternLayout> <TimeBasedTriggeringPolicy /> </RollingFile> </Appenders> <Loggers> <Root level="error"> <AppenderRef ref="RollingFile"/> </Root> </Loggers> </Configuration>
This sample configuration will exhibit the same behavior as the preceding example since the only logger configured is the root.
<?xml version="1.0" encoding="UTF-8"?> <Configuration status="warn" name="MyApp"> <Appenders> <RollingFile name="RollingFile" fileName="logs/app.log" filePattern="logs/app-%d{MM-dd-yyyy}.log.gz"> <BurstFilter level="INFO" rate="16" maxBurst="100"/> <PatternLayout> <pattern>%d %p %c{1.} [%t] %m%n</pattern> </PatternLayout> <TimeBasedTriggeringPolicy /> </RollingFile> </Appenders> <Loggers> <Root level="error"> <MapFilter onMatch="ACCEPT" onMismatch="NEUTRAL" operator="or"> <KeyValuePair key="eventId" value="Login"/> <KeyValuePair key="eventId" value="Logout"/> </MapFilter> <AppenderRef ref="RollingFile"> </AppenderRef> </Root> </Loggers> </Configuration>
This third sample configuration will exhibit the same behavior as the preceding examples since the only logger configured is the root and the root is only configured with a single appender reference.
<?xml version="1.0" encoding="UTF-8"?> <Configuration status="warn" name="MyApp"> <Appenders> <RollingFile name="RollingFile" fileName="logs/app.log" filePattern="logs/app-%d{MM-dd-yyyy}.log.gz"> <BurstFilter level="INFO" rate="16" maxBurst="100"/> <PatternLayout> <pattern>%d %p %c{1.} [%t] %m%n</pattern> </PatternLayout> <TimeBasedTriggeringPolicy /> </RollingFile> </Appenders> <Loggers> <Root level="error"> <AppenderRef ref="RollingFile"> <MapFilter onMatch="ACCEPT" onMismatch="NEUTRAL" operator="or"> <KeyValuePair key="eventId" value="Login"/> <KeyValuePair key="eventId" value="Logout"/> </MapFilter> </AppenderRef> </Root> </Loggers> </Configuration>
MarkerFilter
The MarkerFilter compares the configured Marker value against the Marker that is included in the LogEvent. A match occurs when the Marker name matches either the Log Event's Marker or one of its parents.
Parameter Name | Type | Description |
---|---|---|
marker | String | The name of the Marker to compare. |
onMatch | String | Action to take when the filter matches. May be ACCEPT, DENY or NEUTRAL. The default value is NEUTRAL. |
onMismatch | String | Action to take when the filter does not match. May be ACCEPT, DENY or NEUTRAL. The default value is DENY. |
A sample configuration that only allows the event to be written by the appender if the Marker matches:
<?xml version="1.0" encoding="UTF-8"?> <Configuration status="warn" name="MyApp"> <Appenders> <RollingFile name="RollingFile" fileName="logs/app.log" filePattern="logs/app-%d{MM-dd-yyyy}.log.gz"> <MarkerFilter marker="FLOW" onMatch="ACCEPT" onMismatch="DENY"/> <PatternLayout> <pattern>%d %p %c{1.} [%t] %m%n</pattern> </PatternLayout> <TimeBasedTriggeringPolicy /> </RollingFile> </Appenders> <Loggers> <Root level="error"> <AppenderRef ref="RollingFile"/> </Root> </Loggers> </Configuration>
MutableThreadContextMapFilter (or MutableContextMapFilter)
The MutableThreadContextMapFilter or MutableContextMapFilter allows filtering against data elements that are in the current context. By default this is the ThreadContext Map. The values to compare are defined externally and can be periodically polled for changes.
Parameter Name | Type | Description |
---|---|---|
configLocation | String | A file path or URI that points to the configuration. See below for a sample configuration. |
pollInterval | int | The number of seconds to wait before checking to see if the configuration has been modified. When using HTTP or HTTPS the server must support the If-Modified-Since header and return a Last-Modified header containing the date and time the file was last modified. Note that by default only the https, file, and jar protocols are allowed. Support for other protocols can be enabled by specifying them in the log4j2.Configuration.allowedProtocols system property |
operator | String | If the operator is "or" then a match by any one of the key/value pairs will be considered to be a match, otherwise all the key/value pairs must match. |
onMatch | String | Action to take when the filter matches. May be ACCEPT, DENY or NEUTRAL. The default value is NEUTRAL. |
onMismatch | String | Action to take when the filter does not match. May be ACCEPT, DENY or NEUTRAL. The default value is DENY. |
A configuration containing the MutableContextMapFilter might look like:
<?xml version="1.0" encoding="UTF-8"?> <Configuration status="warn" name="MyApp"> <MutableContextMapFilter onMatch="ACCEPT" onMismatch="NEUTRAL" operator="or" configLocation="http://localhost:8080/threadContextFilter.json" pollInterval="300"> </MutableContextMapFilter> <Appenders> <RollingFile name="RollingFile" fileName="logs/app.log" filePattern="logs/app-%d{MM-dd-yyyy}.log.gz"> <BurstFilter level="INFO" rate="16" maxBurst="100"/> <PatternLayout> <pattern>%d %p %c{1.} [%t] %m%n</pattern> </PatternLayout> <TimeBasedTriggeringPolicy /> </RollingFile> </Appenders> <Loggers> <Root level="error"> <AppenderRef ref="RollingFile"/> </Root> </Loggers> </Configuration>
The configuration file supplied to the filter should look similar to:
<?xml version="1.0" encoding="UTF-8"?> { "configs": { "loginId": ["[email protected]", "[email protected]"], "accountNumber": ["30510263"] } }
NoMarkerFilter
The NoMarkerFilter checks that there is no marker included in the LogEvent. A match occurs when there is no marker in the Log Event.
Parameter Name | Type | Description |
---|---|---|
onMatch | string | Action to take when the filter matches. May be ACCEPT, DENY or NEUTRAL. The default value is NEUTRAL. |
onMismatch | string | Action to take when the filter does not match. May be ACCEPT, DENY or NEUTRAL. The default value is DENY. |
A sample configuration that only allows the event to be written by the appender if no marker is there:
<?xml version="1.0" encoding="UTF-8"?> <?xml version="1.0" encoding="UTF-8"?> <Configuration status="warn" name="MyApp"> <Appenders> <RollingFile name="RollingFile" fileName="logs/app.log" filePattern="logs/app-%d{MM-dd-yyyy}.log.gz"> <NoMarkerFilter onMatch="ACCEPT" onMismatch="DENY"/> <PatternLayout pattern="%d %p %c{1.} [%t] %m%n"/> <TimeBasedTriggeringPolicy /> </RollingFile> </Appenders> <Loggers> <Root level="error"> <AppenderRef ref="RollingFile"/> </Root> </Loggers> </Configuration>
RegexFilter
The RegexFilter allows the formatted or unformatted message to be compared against a regular expression.
Parameter Name | Type | Description |
---|---|---|
regex | String | The regular expression. |
useRawMsg | boolean | If true the unformatted message will be used, otherwise the formatted message will be used. The default value is false. |
onMatch | String | Action to take when the filter matches. May be ACCEPT, DENY or NEUTRAL. The default value is NEUTRAL. |
onMismatch | String | Action to take when the filter does not match. May be ACCEPT, DENY or NEUTRAL. The default value is DENY. |
A sample configuration that only allows the event to be written by the appender if it contains the word "test":
<?xml version="1.0" encoding="UTF-8"?> <Configuration status="warn" name="MyApp"> <Appenders> <RollingFile name="RollingFile" fileName="logs/app.log" filePattern="logs/app-%d{MM-dd-yyyy}.log.gz"> <RegexFilter regex=".* test .*" onMatch="ACCEPT" onMismatch="DENY"/> <PatternLayout> <pattern>%d %p %c{1.} [%t] %m%n</pattern> </PatternLayout> <TimeBasedTriggeringPolicy /> </RollingFile> </Appenders> <Loggers> <Root level="error"> <AppenderRef ref="RollingFile"/> </Root> </Loggers> </Configuration>
Script
The ScriptFilter executes a script that returns true or false.
Parameter Name | Type | Description |
---|---|---|
script | Script, ScriptFile or ScriptRef | The Script element that specifies the logic to be executed. |
onMatch | String | Action to take when the script returns true. May be ACCEPT, DENY or NEUTRAL. The default value is NEUTRAL. |
onMismatch | String | Action to take when the filter returns false. May be ACCEPT, DENY or NEUTRAL. The default value is DENY. |
Parameter Name | Type | Description |
---|---|---|
configuration | Configuration | The Configuration that owns this ScriptFilter. |
level | Level | The logging Level associated with the event. Only present when configured as a global filter. |
loggerName | String | The name of the logger. Only present when configured as a global filter. |
logEvent | LogEvent | The LogEvent being processed. Not present when configured as a global filter. |
marker | Marker | The Marker passed on the logging call, if any. Only present when configured as a global filter. |
message | Message | The Message associated with the logging call. Only present when configured as a global filter. |
parameters | Object[] | The parameters passed to the logging call. Only present when configured as a global filter. Some Messages include the parameters as part of the Message. |
throwable | Throwable | The Throwable passed to the logging call, if any. Only present when configured as a global filter. Som Messages include Throwable as part of the Message. |
substitutor | StrSubstitutor | The StrSubstitutor used to replace lookup variables. |
The sample below shows how to declare script fields and then reference them in specific components.
See ScriptCondition for an example of how the
Script
element can be used to embed script code directly in the configuration.
<?xml version="1.0" encoding="UTF-8"?> <Configuration status="ERROR"> <Scripts> <ScriptFile name="filter.js" language="JavaScript" path="src/test/resources/scripts/filter.js" charset="UTF-8" /> <ScriptFile name="filter.groovy" language="groovy" path="src/test/resources/scripts/filter.groovy" charset="UTF-8" /> </Scripts> <Appenders> <List name="List"> <PatternLayout pattern="[%-5level] %c{1.} %msg%n"/> </List> </Appenders> <Loggers> <Logger name="TestJavaScriptFilter" level="trace" additivity="false"> <AppenderRef ref="List"> <ScriptFilter onMatch="ACCEPT" onMisMatch="DENY"> <ScriptRef ref="filter.js" /> </ScriptFilter> </AppenderRef> </Logger> <Logger name="TestGroovyFilter" level="trace" additivity="false"> <AppenderRef ref="List"> <ScriptFilter onMatch="ACCEPT" onMisMatch="DENY"> <ScriptRef ref="filter.groovy" /> </ScriptFilter> </AppenderRef> </Logger> <Root level="trace"> <AppenderRef ref="List" /> </Root> </Loggers> </Configuration>
StructuredDataFilter
The StructuredDataFilter is a MapFilter that also allows filtering on the event id, type and message.
Parameter Name | Type | Description |
---|---|---|
keyValuePair | KeyValuePair[] | One or more KeyValuePair elements that define the key in the map and the value to match on. "id", "id.name", "type", and "message" should be used to match on the StructuredDataId, the name portion of the StructuredDataId, the type, and the formatted message respectively. If the same key is specified more than once then the check for that key will automatically be an "or" since a Map can only contain a single value. |
operator | String | If the operator is "or" then a match by any one of the key/value pairs will be considered to be a match, otherwise all the key/value pairs must match. |
onMatch | String | Action to take when the filter matches. May be ACCEPT, DENY or NEUTRAL. The default value is NEUTRAL. |
onMismatch | String | Action to take when the filter does not match. May be ACCEPT, DENY or NEUTRAL. The default value is DENY. |
As in this configuration, the StructuredDataFilter can be used to log particular events:
<?xml version="1.0" encoding="UTF-8"?> <Configuration status="warn" name="MyApp"> <StructuredDataFilter onMatch="ACCEPT" onMismatch="NEUTRAL" operator="or"> <KeyValuePair key="id" value="Login"/> <KeyValuePair key="id" value="Logout"/> </StructuredDataFilter> <Appenders> <RollingFile name="RollingFile" fileName="logs/app.log" filePattern="logs/app-%d{MM-dd-yyyy}.log.gz"> <BurstFilter level="INFO" rate="16" maxBurst="100"/> <PatternLayout> <pattern>%d %p %c{1.} [%t] %m%n</pattern> </PatternLayout> <TimeBasedTriggeringPolicy /> </RollingFile> </Appenders> <Loggers> <Root level="error"> <AppenderRef ref="RollingFile"/> </Root> </Loggers> </Configuration>
ThreadContextMapFilter (or ContextMapFilter)
The ThreadContextMapFilter or ContextMapFilter allows filtering against data elements that are in the current context. By default this is the ThreadContext Map.
Parameter Name | Type | Description |
---|---|---|
keyValuePair | KeyValuePair[] | One or more KeyValuePair elements that define the key in the map and the value to match on. If the same key is specified more than once then the check for that key will automatically be an "or" since a Map can only contain a single value. |
operator | String | If the operator is "or" then a match by any one of the key/value pairs will be considered to be a match, otherwise all the key/value pairs must match. |
onMatch | String | Action to take when the filter matches. May be ACCEPT, DENY or NEUTRAL. The default value is NEUTRAL. |
onMismatch | String | Action to take when the filter does not match. May be ACCEPT, DENY or NEUTRAL. The default value is DENY. |
A configuration containing the ContextMapFilter might look like:
<?xml version="1.0" encoding="UTF-8"?> <Configuration status="warn" name="MyApp"> <ContextMapFilter onMatch="ACCEPT" onMismatch="NEUTRAL" operator="or"> <KeyValuePair key="User1" value="DEBUG"/> <KeyValuePair key="User2" value="WARN"/> </ContextMapFilter> <Appenders> <RollingFile name="RollingFile" fileName="logs/app.log" filePattern="logs/app-%d{MM-dd-yyyy}.log.gz"> <BurstFilter level="INFO" rate="16" maxBurst="100"/> <PatternLayout> <pattern>%d %p %c{1.} [%t] %m%n</pattern> </PatternLayout> <TimeBasedTriggeringPolicy /> </RollingFile> </Appenders> <Loggers> <Root level="error"> <AppenderRef ref="RollingFile"/> </Root> </Loggers> </Configuration>
The ContextMapFilter can also be applied to a logger for filtering:
<?xml version="1.0" encoding="UTF-8"?> <Configuration status="warn" name="MyApp"> <Appenders> <RollingFile name="RollingFile" fileName="logs/app.log" filePattern="logs/app-%d{MM-dd-yyyy}.log.gz"> <BurstFilter level="INFO" rate="16" maxBurst="100"/> <PatternLayout> <pattern>%d %p %c{1.} [%t] %m%n</pattern> </PatternLayout> <TimeBasedTriggeringPolicy /> </RollingFile> </Appenders> <Loggers> <Root level="error"> <AppenderRef ref="RollingFile"/> <ContextMapFilter onMatch="ACCEPT" onMismatch="NEUTRAL" operator="or"> <KeyValuePair key="foo" value="bar"/> <KeyValuePair key="User2" value="WARN"/> </ContextMapFilter> </Root> </Loggers> </Configuration>
ThresholdFilter
This filter returns the onMatch result if the level in the LogEvent is the same or more specific than the configured level and the onMismatch value otherwise. For example, if the ThresholdFilter is configured with Level ERROR and the LogEvent contains Level DEBUG then the onMismatch value will be returned since ERROR events are more specific than DEBUG.
Parameter Name | Type | Description |
---|---|---|
level | String | A valid Level name to match on. |
onMatch | String | Action to take when the filter matches. May be ACCEPT, DENY or NEUTRAL. The default value is NEUTRAL. |
onMismatch | String | Action to take when the filter does not match. May be ACCEPT, DENY or NEUTRAL. The default value is DENY. |
A sample configuration that only allows the event to be written by the appender if the level matches:
<?xml version="1.0" encoding="UTF-8"?> <Configuration status="warn" name="MyApp"> <Appenders> <RollingFile name="RollingFile" fileName="logs/app.log" filePattern="logs/app-%d{MM-dd-yyyy}.log.gz"> <ThresholdFilter level="TRACE" onMatch="ACCEPT" onMismatch="DENY"/> <PatternLayout> <pattern>%d %p %c{1.} [%t] %m%n</pattern> </PatternLayout> <TimeBasedTriggeringPolicy /> </RollingFile> </Appenders> <Loggers> <Root level="error"> <AppenderRef ref="RollingFile"/> </Root> </Loggers> </Configuration>
TimeFilter
The time filter can be used to restrict filter to only a certain portion of the day.
Parameter Name | Type | Description |
---|---|---|
start | String | A time in HH:mm:ss format. |
end | String | A time in HH:mm:ss format. Specifying an end time less than the start time will result in no log entries being written. |
timezone | String | The timezone to use when comparing to the event timestamp. |
onMatch | String | Action to take when the filter matches. May be ACCEPT, DENY or NEUTRAL. The default value is NEUTRAL. |
onMismatch | String | Action to take when the filter does not match. May be ACCEPT, DENY or NEUTRAL. The default value is DENY. |
A sample configuration that only allows the event to be written by the appender from 5:00 to 5:30 am each day using the default timezone:
<?xml version="1.0" encoding="UTF-8"?> <Configuration status="warn" name="MyApp"> <Appenders> <RollingFile name="RollingFile" fileName="logs/app.log" filePattern="logs/app-%d{MM-dd-yyyy}.log.gz"> <TimeFilter start="05:00:00" end="05:30:00" onMatch="ACCEPT" onMismatch="DENY"/> <PatternLayout> <pattern>%d %p %c{1.} [%t] %m%n</pattern> </PatternLayout> <TimeBasedTriggeringPolicy /> </RollingFile> </Appenders> <Loggers> <Root level="error"> <AppenderRef ref="RollingFile"/> </Root> </Loggers> </Configuration>