This repository contains all my practice codes of TM4C123GXL coded in CCS7. The Texas Instruments Tiva C LaunchPad board TM4C123G is used for the code. The TM4C123GXL Launchpad has the TM4C123GH6PM microcontroller which is based on the ARM Cortex-M4F microcontroller architecture and clocked at 80 MHz (with 100 DMIPS)

Minimal TCP/IP stack for non OS based micrcontroller enviornment.

Written in Code Composer Studio and tested on Tiva C Series TM4C123G LaunchPad.

Tiva C: UART, I2C, SPI, SSI

Tutorials for the Tiva C Series TM4C123G Launchpad.

Driver library for the TM4C123GH6PM Microcontroller

This repository contains all my practice codes of TM4C123GXL coded in IAR Workbench. The Texas Instruments Tiva C LaunchPad board TM4C123G is used for the code. The TM4C123GXL Launchpad has the TM4C123GH6PM microcontroller which is based on the ARM Cortex-M4F microcontroller architecture and clocked at 80 MHz (with 100 DMIPS).

A variety of helper functions, driverlib, and sensorlib rewrites to facilitate easier programming of the TI TM4C microprocessors.

Programmed in C using Keil IDE with ARM Cortex architecture

A (potato-y) portable game console made using the TM4C Launchpad, duct tape, and magic.

The following is a HID 15 button arcade stick with an LCD Screen. The tm4c123gxl microcontroller is used for this project.

TivaC (TM4C1294NCPDT and TM4C123GH6PM) Template Project (CMakefile)

Bare metal lessons on Tiva TM4C123GXL

Light weight wireless messaging protocol for low power sensor network, based on slotted aloha access method.

The following is an unbeatable tic-tac-toe game using the tiva TM4C123GXL microcontroller.

Servo Motor is Programmed Through Tiva C Launchpad to press a button on Electric Board

Ambulator is a device that provides air to human lungs accordings to the requirements in emergency condition. Rack and Pinion Mechanism is pressing the ambu bag to provide air to the patient. Motion of rack is controlled as it is attached to TM4C123GH6PM progranmmed stepper motor through a pinion.

Utilities for the TI TM4C123G (Tiva C LaunchPad) board

Bits and pieces from embedded programming (EEE405) for Tiva-C LaunchPads.

Home Automation operating by two TM4C123GXL development board.