20 pin SWD/JTAG J-Link to 10 pin (0.1" and 0.05") reconfigurable Cortex-M header with power supply and TagConnect compatibility. (Info about about J-Link Commander and Segger RTT is also given.)

A Rust library for talking to J-Link USB devices

A simple RTT client using Python 3 and pynrfjprog

How to Program and Recover Chinese Clone of the st-link v2 and reflash it to segger j-link

Template to build a flash algorithm for the Segger J-link software. (Also works without having a DSK license. Rip Open Flash Loader).

Проект подготовлен для работы с отладочной платой Milandr 1986BE92 через VSCode (версия для Windows) с работой через j-link

Convert your ST-Link STM8/STM32 v2 (or clone) into a J-Link

3D printable enclosure for j-link JTAG Adapter Board (The Segger j-link). Created with Rhino 6.

template project to create a installer for open flash loaders

J-Link script file to perform full chip erase of the TI CC13x0/CC26x0 devices

Blinky example for nRF52/Zephyr using CMake/GNU/J-Link + VSCode/CortexDebug

A SWD breakout board for Segger J-Link Debuggers

Adapter PCB for connecting a programmer (SEGGER J-Link or STMicroelectronics ST-Link) to a microcontroller via jumper cables or 10 pin header. It's also possible to monitor the target supply by LED or supply the target (with voltage regulator) or do both.

Example code for flashing and configuring JLink connected devices over RTT in parallel

Multi-Target Blinky Example - PlatformIO - Arduino Uno, myAVR Board MK2 2.20, MCB1768, STM32F407VG

Debug a NCS project's toolchain with a powershell script.