Console tools for connecting to, and serving, devices using MikroTik RouterOS MAC-Telnet protocol.
haakonn/mactelnet contains all four programs:
docker run -it --rm --net=host haakonn/mactelnet mactelnet …
docker run -it --rm --net=host haakonn/mactelnet macping …
docker run -it --rm --net=host haakonn/mactelnet mndp …
docker run -it --rm --net=host haakonn/mactelnet mactelnetd …
Note that Docker runs containers on isolated internal networks by default. --net=host instructs Docker to provide mactelnet direct access to the host machine's network interfaces.
See Usage for more.
To install dependencies:
yum -y install wget automake gettext gettext-devel gcc make
Download source tarball, extract, compile and install:
wget http://github.com/haakonnessjoen/MAC-Telnet/tarball/master -O mactelnet.tar.gz
tar zxvf mactelnet.tar.gz
cd haakonness*/
./autogen.sh
make all install
Dependencies: gcc (or similar), automake, autoconf
To install dependencies on Debian/Ubuntu based systems:
apt-get install build-essential automake autoconf
Download source tarball, extract, compile and install:
wget http://github.com/haakonnessjoen/MAC-Telnet/tarball/master -O mactelnet.tar.gz
tar zxvf mactelnet.tar.gz
cd haakonness*/
./autogen.sh
make all install
Dependencies: clang (gcc or similar), automake, autoconf
To install dependencies on Debian/Ubuntu based systems:
pkg install automake autoconf gettext-tools
Download source tarball, extract, compile and install:
wget http://github.com/haakonnessjoen/MAC-Telnet/tarball/master -O mactelnet.tar.gz
tar zxvf mactelnet.tar.gz
cd haakonness*/
./autogen.sh
./configure LDFLAGS=" -L/usr/local/lib"
gmake all install
Install dependencies, download source tarball, extract, compile and install:
wget http://github.com/haakonnessjoen/MAC-Telnet/tarball/master -O mactelnet.tar.gz
tar zxvf mactelnet.tar.gz
cd haakonness*/
# Install dependencies
brew install gettext autoconf automake libtool
# Check what paths it tells you to use, for a standard install, the following should suffice:
export PATH=/usr/local/opt/gettext/bin:$PATH
./autogen.sh
export LDFLAGS=-L/usr/local/opt/gettext/lib
export CPPFLAGS=-I/usr/local/opt/gettext/include
./configure --with-libintl-prefix=/usr/local/opt/gettext/include
make all install
And you are ready..
Install dependencies, download source tarball, extract, compile and install:
export build=~/devtools # or wherever you'd like to build
mkdir -p $build
cd $build
wget https://ftp.gnu.org/gnu/autoconf/autoconf-2.69.tar.gz
tar xzf autoconf-2.69.tar.gz
cd autoconf-2.69
./configure --prefix=/usr/local
make
sudo make install
export PATH=$PATH:/usr/local/bin
cd $build
wget https://ftp.gnu.org/gnu/automake/automake-1.15.tar.gz
tar xzf automake-1.15.tar.gz
cd automake-1.15
./configure --prefix=/usr/local
make
sudo make install
cd $build
wget https://ftp.gnu.org/gnu/libtool/libtool-2.4.6.tar.gz
tar xzf libtool-2.4.6.tar.gz
cd libtool-2.4.6
./configure --prefix=/usr/local
make
sudo make install
cd $build
wget https://ftp.gnu.org/gnu/gettext/gettext-0.19.8.1.tar.gz
tar zxf gettext-0.19.8.1.tar.gz
cd gettext-0.19.8.1
./configure --prefix=/usr/local
make
sudo make install
cd $build
wget http://github.com/haakonnessjoen/MAC-Telnet/tarball/master -O mactelnet.tar.gz
tar zxf mactelnet.tar.gz
cd haakonness*/
./autogen.sh
make all
sudo make install
And you are ready.
# mactelnet -h
Usage: mactelnet <MAC|identity> [-h] [-n] [-a <path>] [-A] [-t <timeout>] [-u <user>] [-p <password>] [-U <user>] | -l [-B] [-t <timeout>]
Parameters:
MAC MAC-Address of the RouterOS/mactelnetd device. Use mndp to
discover it.
identity The identity/name of your destination device. Uses
MNDP protocol to find it.
-l List/Search for routers nearby (MNDP). You may use -t to set timeout.
-B Batch mode. Use computer readable output (CSV), for use with -l.
-n Do not use broadcast packets. Less insecure but requires
root privileges.
-a <path> Use specified path instead of the default: ~/.mactelnet for autologin config file.
-A Disable autologin feature.
-t <timeout> Amount of seconds to wait for a response on each interface.
-u <user> Specify username on command line.
-p <password> Specify password on command line.
-U <user> Drop privileges to this user. Used in conjunction with -n
for security.
-q Quiet mode.
-h This help.
Example using identity:
$ mactelnet main-router
Searching for 'main-router'...found
Login: admin
Password:
Connecting to d4:ca:6d:12:47:13...done
Example using mac address:
$ mactelnet 0:c:42:43:58:a5 -u admin
Password:
Connecting to 0:c:42:43:58:a5...done
MMM MMM KKK TTTTTTTTTTT KKK
MMMM MMMM KKK TTTTTTTTTTT KKK
MMM MMMM MMM III KKK KKK RRRRRR OOOOOO TTT III KKK KKK
MMM MM MMM III KKKKK RRR RRR OOO OOO TTT III KKKKK
MMM MMM III KKK KKK RRRRRR OOO OOO TTT III KKK KKK
MMM MMM III KKK KKK RRR RRR OOOOOO TTT III KKK KKK
MikroTik RouterOS 4.0 (c) 1999-2009 http://www.mikrotik.com/
[admin@HMG] >
You can use the well known "expect" tool to automate/script dialogues via mactelnet!
# mactelnet -l
# macping -h
Usage: macping <MAC> [-h] [-c <count>] [-s <packet size>]
Parameters:
MAC MAC-Address of the RouterOS/mactelnetd device.
-s Specify size of ping packet.
-c Number of packets to send. (0 = for ever)
-h This help.
Example:
# macping 0:c:42:43:58:a5
0:c:42:43:58:a5 56 byte, ping time 1.17 ms
0:c:42:43:58:a5 56 byte, ping time 1.07 ms
0:c:42:43:58:a5 56 byte, ping time 1.20 ms
0:c:42:43:58:a5 56 byte, ping time 0.65 ms
0:c:42:43:58:a5 56 byte, ping time 1.19 ms
5 packets transmitted, 5 packets received, 0% packet loss
round-trip min/avg/max = 0.65/1.06/1.20 ms
Or for use in bash-scripting:
# macping 0:c:42:43:58:a5 -c 2 >/dev/null 2>&1 || ( echo "No answer for 2 pings" | mail -s "router down" [email protected] )