Supercritical adsorption
![]() | This article includes a list of references, related reading, or external links, but its sources remain unclear because it lacks inline citations. (April 2021) |
Supercritical adsorption also referred to as the adsorption of supercritical fluids, is the adsorption at above-critical temperatures. There are different tacit understandings of supercritical fluids. For example, “a fluid is considered to be ‘supercritical’ when its temperature and pressure exceed the temperature and pressure at the critical point”. In the studies of supercritical extraction, however, “supercritical fluid” is applied for a narrow temperature region of 1-1.2 or to +10 K, which is called the supercritical region. ( is the critical temperature)
History
[edit]Observations of supercritical adsorption reported before 1930 was covered in studies by McBain and Britton. All of the important articles on this subject published between 1930 and 1966 have been reviewed by Menon. During the last 20 years, a growing interest in supercritical adsorption research under the impetus of the quest for clean alternative fuels has been observed. Considerable progress has been made in both adsorption measurement techniques and molecular simulation of adsorption on computers, rendering new insights into the nature of supercritical adsorption.
Properties
[edit]According to the adsorption behavior, the adsorption of gases on solids can be classified into three temperature ranges relative to :
1.Subcritical region (T<)
2.Near-critical region (<T<+10)
3. The region T>+10
Isotherms in the first region will show the feature of subcritical adsorption. Isotherms in the second region will show the feature of mechanism transition. Isotherms in the third region will show the feature of supercritical adsorption. The transition will take a continuous way if the isotherms in both sides of the critical temperature belong to the same type, such as adsorption on microporous activated carbon. However, discontinuous transition could be observed on isotherms in the second region if there is a transformation of isotherm types, such as adsorption on mesoporous silica gel. The decisive factor in such a classification of adsorption is merely temperature, irrespective of pressure. This is because a fluid cannot undergo a transition to a liquid phase at above-critical temperature, regardless of the pressure applied. This fundamental law determines the different adsorption mechanism for the subcritical and supercritical regions. For the subcritical region, the highest equilibrium pressure of adsorption is the saturation pressure of adsorbate. Beyond condensation happens. Adsorbate in the adsorbed phase is largely in liquid state, based on which different adsorption and thermodynamic theories as well as their applications were developed. For supercritical region, condensation cannot happen, no matter how great the pressure is.
Acquisition of supercritical adsorption isotherms
[edit]An adsorption isotherm depicts the relation between the quantity adsorbate and the bulk phase pressure (or density) at equilibrium for a constant temperature. It is a dataset of specified adsorption equilibrium. Such equilibrium data are required for optimal design of process relying on adsorption and are considered fundamental information for theoretical studies.
Measurement of gas-solid adsorption equilibria
[edit]Volumetric method
[edit]![](http://upload.wikimedia.org/wikipedia/commons/thumb/1/11/Supercritical_adsorption_figure1.jpg/220px-Supercritical_adsorption_figure1.jpg)
Volumetric method was used in the early days of adsorption studies by Langmuir, Dubinin and others. It basically comprises a gas expansion process from a storage vessel (reference cell) to an adsorption chamber including adsorbent (adsorption cell) through a controlling valve C, as schematically shown in Figure 1. The reference cell with volume is kept at a constant temperature . The value of includes the volume of the tube between the reference cell and valve C. The adsorption cell is kept at the specified equilibrium temperature . The volume of the connecting tube between the adsorption cell and valve is divided into two parts: one part with volume with same temperature as the reference cell. The other part is buried in an atmosphere of temperature . Its volume is added to the volume of adsorption cell .
![](http://upload.wikimedia.org/wikipedia/commons/thumb/0/06/Supercritical_adsorption_figure2.jpg/220px-Supercritical_adsorption_figure2.jpg)
![](http://upload.wikimedia.org/wikipedia/commons/thumb/e/e2/Supercritical_adsorption_figure3.jpg/220px-Supercritical_adsorption_figure3.jpg)
![](http://upload.wikimedia.org/wikipedia/commons/thumb/e/ed/Supercritical_adsorption_figure4.jpg/220px-Supercritical_adsorption_figure4.jpg)
![](http://upload.wikimedia.org/wikipedia/commons/thumb/6/69/Supercritical_adsorption_figure5.jpg/220px-Supercritical_adsorption_figure5.jpg)
![](http://upload.wikimedia.org/wikipedia/commons/thumb/a/aa/Supercritical_adsorption_figure6.jpg/220px-Supercritical_adsorption_figure6.jpg)
The amount adsorbed can be calculated from the pressure readings before and after opening valve C based on the p-V-T relationship of real gases. A dry and degassed adsorbent sample of known weight was enclosed in the adsorption cell. An amount of gas is let into to maintain a pressure . The moles of gas confined in are calculated as:
The pressure drops to after opening valve C. The amount of gas maintained in , , and are respectively:
The amount adsorbed or the excess adsorption N is then obtained:
where and are the moles of the gas remaining in and before opening valve C. All of the compressibility factor values are calculated by a proper equation of state, which can generate appropriate z values for temperatures not close to the critical zone.
The main advantages of this method are simplicity in procedure, commercial availability of instruments, and the large ranges of pressure and temperature in which this method can be realized. The disadvantage of volumetric measurements is the considerable amount of adsorbent sample needed to overcome adsorption effects on the walls of the vessels. However, this may be a positive aspect if the sample is adequate. A larger amount of sample results in considerable adsorption and usually provides a larger void space in the adsorption cell, rendering the effect of uncertainty in “dead space” to a minimum.
Gravimetric method
[edit]In gravimetric method, the weight change of the adsorbent sample in the gravity field due to adsorption from the gas phase is recorded. Various types of sensitive microbalance have been developed for this purpose. A continuous-flow gravimetric technique coupled with wavelet rectification allows for higher precision, especially in the near-critical region.
Major advantages of gravimetric method include sensitivity, accuracy, and the possibility of checking the state of activation of an adsorbent sample. However, consideration must be given to buoyancy correction in gravimetric measurement. A counterpart is used for this purpose. The solid sample is placed in a sample holder on one arm of the microbalance while the counterpart is loaded on the other arm. Care must be taken to keep the volume of the sample and the counterpart as close as possible to reduce the buoyancy effect. The system is vacuumed and the balance is zeroed before starting experiments. Buoyancy is measured by introducing helium and pressurizing up to the highest pressure of the experiment. It is assumed that helium does not adsorb and any weight change (ΔW) is due to buoyancy. Knowing the density of helium (), one can determine the difference in volume (ΔV) between the sample and the counterpart:
The measured weight can be corrected for the buoyancy effect at a specified temperature and pressure:
is the weight reading before correction.
Generating isotherms by molecular simulation of adsorption
[edit]Monte Carlo and molecular dynamic approaches became useful tools for theoretical calculations aiming at predictions of adsorption equilibria and diffusivities in small pores of various simple geometries. The interactions between adsorbate molecules are represented by the Lenard-Jones potential:
where r is the interparticle distance, is the point at which the potential is zero, and is the well depth.
Experimental isotherms of the supercritical region
[edit]Li Zhou and coworkers used a volumetric apparatus to measure the adsorption equilibria of hydrogen and methane on activated carbon (Figure 2, 3). They also measure the adsorption equilibria of nitrogen on microporous activated carbon (Figure 4) and on a mesoporous silica gel (Figure 5) for both subcritical and supercritical region. Figure 6 shows the isotherms of methane on silica gel.
Future problems
[edit]Adsorption of fluid at above-critical temperatures and elevated pressures is a field growing importance in both science and engineering. It is the physicochemical basis of many engineering processes and potential industrial applications. For example, separation or purification of light hydrocarbons, storage of fuel gases in microporous solids, adsorption from supercritical gases in extraction processes and chromatography. Besides, knowledge of gas/solid interface phenomenon at high pressures is fundamental to heterogeneous catalysis. However, the limited number of reliable high-pressure adsorption data hampered the progress of the theoretical study.
At least two problems have to be solved before a consistent system of theories for supercritical adsorption becomes sophisticated: first, how to set up a thermodynamically standard state for the supercritical adsorbed phase, so that the adsorption potential for supercritical adsorption can be evaluated? Second, how to determine the total amount in the adsorbed phase based on experimentally measured equilibrium data. Determination of the absolute adsorption is needed for establishing thermodynamic theory because as a reflection of statistical behavior of molecules, thermodynamic rules must rely on the total, not part of, material confined in the system studied.
From recent studies of supercritical adsorption, there seems to be an end in the high-pressure direction for supercritical adsorption. However, adsorbed-phase density is the decisive factor for the existence of this end. The state of adsorbate at the “end” provides the standard state of the supercritical adsorbed phase just like the saturated liquid, which is the end state of adsorbate in the subcritical adsorption. So the “end state” has to be precisely defined. To establish a definite relationship for the adsorbed phase density at the end state, abundant and reliable experimental data are still required.
References
[edit]- József Tóth (2002). Adsorption: Theory, Modeling, and Analysis. CRC Press ISBN 0-8247-0747-8, ISBN 978-0-8247-0747-7
- Jyh-Ping Hsu (1999). Interfacial Forces and Fields: Theory and Applications. CRC Press ISBN 0-8247-1964-6, ISBN 978-0-8247-1964-7
- Eldred H. Chimowitz (2005). Introduction to Critical Phenomena in Fluids. Oxford University Press US ISBN 0-19-511930-4, ISBN 978-0-19-511930-5
- Jacques P. Fraissard, Curt W. Conner (1997). Physical Adsorption: Experiment, Theory, and Applications. Springer ISBN 0-7923-4547-9, ISBN 978-0-7923-4547-3
- Li Zhou (2006). Adsorption Progress in Fundamental and Application Research. World Scientific ISBN 978-981-277-025-7
- Y Zhou, Y Sun, L Zhou. An experimental study on the adsorption behavior of gases on crossing the critical temperature. The 7th International Conference on Fundamentals of Adsorption, Nagasaki, 2001
- Peng B, Yu YX, A Density Functional Theory for Lennard-Jones Fluids in Cylindrical Pores and Its Applications to Adsorption of Nitrogen on MCM-41 Materials. Langmuir, 24 (2008) 12431-12439
- Estella J, Echeverria JC, Laguna M, et al. Effect of supercritical drying conditions in ethanol on the structural and textural properties of silica aerogels. Journal of Porous Materials, 15 (2008) 705-713
- Li M, Pham PJ, Pittman CU, et al. Selective Solid-Phase Extraction of a-Tocopherol by Functionalized Ionic Liquid-modified Mesoporous SBA-15 Adsorbent. Analytical Sciences, 24 (2008) 1245-1250
- Ottiger S, Pini R, Storti G, et al. Competitive adsorption equilibria of CO2 and CH4 on a dry coal. Adsorption-Journal of the International Adsorption Society. 14 (2008) 539-556
- Vedaraman N, Srinivasakannan C, Brunner G, et al. Kinetics of cholesterol extraction using supercritical carbon dioxide with cosolvents. Industrial & Engineering Chemistry Research, 47 (2008) 6727-6733
- Chen Y, Koberstein JT. Fabrication of block copolymer monolayers by adsorption from supercritical fluids: A versatile concept for modification and functionalization of polymer surfaces. Langmuir, 24 (2008) 10488-10493