Jump to content

Programmable unijunction transistor

From Wikipedia, the free encyclopedia
Programmable unijunction transistor
TypePassive
InventedGeneral Electric[1]
Pin configuration anode, gate and cathode
Electronic symbol
Graph of PUT characteristic curve, similar to UJT

A programmable unijunction transistor (PUT) is a three-lead electronic semiconductor device which is similar in its characteristics to a unijunction transistor (UJT), except that its behavior can be controlled using external components. In a UJT, the base region is divided into two parts by the emitter. The two parts of the base form a voltage divider, which sets the operating point of the UJT. That voltage divider can be programmed with two physical resistors connected to the gate terminal of the PUT. This allows the designer some control over the operating point of the PUT.[2]

Construction

[edit]

In construction, the programmable transistor is similar to the silicon controlled rectifier. It consists of four layers, two p-type layers and two n-type layers in equal proportion.[1]

Applications

[edit]

As of 2012 ON Semiconductor manufactured a part: 2N6027. 2N6028 was also made in the past.[1]

References

[edit]
  1. ^ a b c Jim Keith. "Programmable Unijunction Transistor Flasher".
  2. ^ "PUT - Programmable Unijunction Transistor - Working, Construction, Biasing - D&E notes". www.daenotes.com. 15 December 2017.