Module:Military navigation/sandbox

This is the module sandbox page for Module:Military navigation (diff).

Module documentation[view] [edit] [history] [purge]

This module is subject to page protection. It is a highly visible module in use by a very large number of pages, or is substituted very frequently. Because vandalism or mistakes would affect many pages, and even trivial editing might cause substantial load on the servers, it is protected from editing.

This template is used on approximately 66,000 pages and changes may be widely noticed. Test changes in the template's /sandbox or /testcases subpages, or in your own user subpage. Consider discussing changes on the talk page before implementing them.

This module depends on the following other modules:

Navigation templates

The various navigation templates maintained by the Military history WikiProject are all intended to be implemented through a single base template, which combines the project's common template style with the standard navigation box format. This is needed primarily to allow multiple such templates to be stacked together—with each other, or with infobox templates—to present the appearance of a continuous block; it is also beneficial for providing a consistent appearance to the entire set of articles within our scope.

Any military-related navigational template should be created using the {{military navigation}} base template, as shown below:

{{Military navigation
| name = 
| raw_name =
| state = 
| style = 
| title = 
| image = 
| imageleft = 
| odd_color = 
| even_color = 
| above = 
| listclass = 

| group1 = 
| list1 = 

| group2 = 
| list2 = 

| group3 = 
| list3 = 
...
| group30 = 
| list30 = 

| below = 
}}

name

The actual page name (i.e. "XYZ" for Template:XYZ) of the newly-created template.

raw_name: Use instead of "name" to omit the V · T · E links from the title bar.

title: The displayed title of the navigation box.
listclass: Optional – but typically hlist, to format content as horizontal lists. In the case of hlists in above or below fields, set bodyclass=hlist, instead.
style: Optional – an alternative style for the template; this may be set to "wide" to produce a full-width box. The alternative style should be used sparingly; it is intended that the majority of navigational templates will use the default style (in the wild, "wide" has become quite common). The above example template formatted with style=wide is shown below:

state: Optional – may be set to "collapsed" to force the template to render in its closed state by default.
odd_color/even_color: Optional – the stripe colors for alternating listN items to use. These parameters should be used sparingly; in the absence of a good reason to do otherwise, templates should use the default stripe colors.
groupN/listN: The body of the navigation box, consisting of successive horizontal blocks of content (the listN fields) with optional labels (the corresponding groupN fields). Please see the documentation for {{navbox}} for more details on the different layouts possible.
above: Optional – the sub-header of the navigation box; please see the documentation for {{navbox}} for more details on the resulting layout when this is used.
below: Optional – the footer of the navigation box; please see the documentation for {{navbox}} for more details on the resulting layout when this is used.
image: Optional – an image to be displayed at the right of the box, given in the form [[File:Example.jpg|100px]]. This parameter should be used sparingly, and typically only in conjunction with the full-width template style.
imageleft: Optional – an image to be displayed at the left of the box, given in the form [[File:Example.jpg|100px]]. This parameter should be used sparingly, and typically only in conjunction with the full-width template style.

Common problems with navigation templates

There are several known issues with the current navigation template design that editors should be aware of:

Shifted header wrapping: A long header used in a narrow navigation template may wrap incorrectly, with the second line being indented further than necessary. A workaround is possible by adding a <br /> tag between the words where the wrapping is to occur. This should be done to separate link-text to the right of the 'pipe' (|), as follows: [[Article title|Article <br /> title]]. An alternative method is to use {{wrap}} for the link-text as follows: [[A very long article title|{{wrap|A very long article title}}]], which allows the browser to break as-needed.
Stretching or overflowed boxes: A very long header formatted as a single link may cause a template to stretch beyond its normal width, or the whole link to extend off too far to the right. A workaround is possible by breaking the header onto multiple lines, as shown above.

The above documentation is transcluded from Module:Military navigation/doc.
Editors can experiment in this module's sandbox and testcases pages.
Add categories to the /doc subpage. Subpages of this module.

local p = { }

local Navbox = require('Module:Navbox')
local Styles = require('Module:WPMILHIST Infobox style')

local function isblank(s)
	return (not s) or s == ''
end
local function isnotblank(s)
	return s and s ~= ''
end

function p.main(frame)
    local args = { }
    local pargs = frame:getParent().args
    local sargs = {}
    local tcats = ''

	-- process bodystyle and titlestyle
	if (pargs['style'] or '') == 'wide' then
		args['titlestyle'] = Styles['nav_box_wide_header']
		args['bodystyle'] = Styles['nav_box_wide']
	else
		args['titlestyle'] = Styles['nav_box_header']
		if (pargs['border'] or '') == 'child' or 
			(pargs['border'] or '') == 'subgroup' then
			args['bodystyle'] = Styles['nav_box_child']
			tcats = tcats .. '[[Category:Pages using military navigation subgroups without wide style]]'
		else
			args['bodystyle'] = Styles['nav_box']
		end
	end
	sargs['titlestyle'] = 1
	sargs['bodystyle'] = 1

	-- process groupstyle, abovestyle, belowstyle
	args['groupstyle'] = Styles['nav_box_label'] .. (pargs['groupstyle'] or '')
	sargs['groupstyle'] = 1
	args['abovestyle'] = Styles['nav_box_label'] .. (pargs['abovestyle'] or '')
	sargs['abovestyle'] = 1
	args['belowstyle'] = Styles['nav_box_label'] .. (pargs['belowstyle'] or '')
	sargs['belowstyle'] = 1
	-- process oddstyle, evenstyle
	args['oddstyle'] = isnotblank(pargs['odd_color'])
		and ('background:' .. pargs['odd_color']) or nil
	sargs['oddstyle'] = 1
	args['evenstyle'] = isnotblank(pargs['even_color'])
		and ('background:' .. pargs['even_color']) or nil
	sargs['evenstyle'] = 1
	-- process name and rawname
	args['name'] = (isnotblank(pargs['name']) and pargs['name']) or pargs['rawname']
	if isblank(args['name']) then args['navbar'] = 'plain' end
	sargs['name'] = 1
	sargs['rawname'] = 1
	
    -- copy the remaining args
    for k, v in pairs(pargs) do
        if v and v ~= '' and sargs[k] == nil then
            args[k] = v
        end
    end
	-- add allow wrap
	if args['title'] and (pargs['style'] or '') ~= 'wide' then
		if not mw.ustring.match(args['title'], '<span class="wrap">') then
			-- probably a more efficient way to match 15 or more characters
			local m = '[^%[%]<>|][^%[%]<>|][^%[%]<>|][^%[%]<>|][^%[%]<>|]'
			m = m .. m .. m
			args['title'] = mw.ustring.gsub(args['title'], 
				'%[%[(' .. m .. '[^%[%]<>|]*)%]%]', 
				'[[%1|<span class="wrap">%1</span>]]')
			args['title'] = mw.ustring.gsub(args['title'], 
				'%[%[([^%[%]<>|]*)|(' .. m .. '[^%[%]<>|]*)%]%]', 
				'[[%1|<span class="wrap">%2</span>]]')
		end
	end
	
	-- add navbox-vertical for non-wide format
	if (pargs['style'] or '') ~= 'wide' then
		args['bodyclass'] = 'navbox-vertical' .. (args['bodyclass'] and (' ' .. args['bodyclass']) or '')
	end
	
    return tcats .. Navbox._navbox(args)

end  

return p

v t e Corps of the Grande Armée
Regular	I II III IV V VI VII VIII IX X XI XII XIII XIV
Cavalry	Reserve I II III IV V VI

v t e Corps of the Grande Armée
Regular	I II III IV V VI VII VIII IX X XI XII
Cavalry	I II III IV V