Jump to content

Historic Union Pacific Rail Trail State Park

Coordinates: 40°39′36″N 111°30′05″W / 40.66°N 111.5013889°W / 40.66; -111.5013889
From Wikipedia, the free encyclopedia

Historic Union Pacific Rail Trail State Park
IUCN category V (protected landscape/seascape)
Historic Union Pacific Rail Trail just north of Wanship
Map showing the location of Historic Union Pacific Rail Trail State Park
Map showing the location of Historic Union Pacific Rail Trail State Park
Location of Historic Union Pacific Rail Trail in Utah
Map showing the location of Historic Union Pacific Rail Trail State Park
Map showing the location of Historic Union Pacific Rail Trail State Park
Historic Union Pacific Rail Trail State Park (the United States)
LocationSummit, Utah, United States
Coordinates40°39′36″N 111°30′05″W / 40.66°N 111.5013889°W / 40.66; -111.5013889
Area450 acres (180 ha)
Established1992
OperatorUtah State Parks, Mountain Trails Foundation

The Historic Union Pacific Rail Trail State Park is a recreational trail that follows abandoned railroad lines in Summit County, Utah, United States.

The Historic Union Pacific Rail Trail is 28 miles (45 km) long, and averages 125 feet (38 m) wide.[1] The trail stretches between Park City (beginning at 40.66°N/111.5013889°W) and Echo Reservoir (ending at 40.972041°N/111.437895°W), following Interstate 80 across Silver Creek Canyon, then going along the Weber River through the towns of Wanship and Coalville. Elevation along the trail varies from 5,280 feet (1,610 m) to 6,900 feet (2,100 m), and total acreage is 450 acres (1.8 km2).[2] The trail is designated to be used for only non-motorized activities, including biking, hiking, horseback riding, jogging, and Nordic skiing. The trail is managed by the Mountain Trails Foundation.[3]

History

[edit]
The Wanship stop

In 1871 the Summit County Railroad Company was organized. It constructed a five-mile (8 km) narrow gauge railway to transport coal from mines in Coalville to the Union Pacific line in Echo. In 1880, the Utah Eastern Railroad built a narrow-gauge line between Coalville and Park City to transport coal to fuel the pumps that removed underground water from Park City’s silver mines. At the same time, the Union Pacific Railroad constructed the Echo-Park City Railway, a broad-gauge spur line, alongside it.

The narrow-gauge lines were eventually abandoned, and in 1989, Union Pacific abandoned its line. Union Pacific, along with the Division of Parks and Recreation, and A&K Railroad Materials, turned the property into the first non-motorized recreational trail in Utah. The state park opened to the public in 1992.[3]

References

[edit]
  1. ^ Mountain Trails Foundation. "Mountain Trails Foundation". Archived from the original on September 5, 2008. Retrieved November 11, 2008.
  2. ^ Utah.com. "Historic Union Pacific Rail Trail State Park". Utah.com LC. Archived from the original on January 4, 2011. Retrieved February 6, 2011.
  3. ^ a b "Historic Union Pacific Rail Trail". Utah State Parks. Retrieved February 6, 2011.
[edit]