Jump to content

Alloy steel

From Wikipedia, the free encyclopedia

Alloy steel is steel that is alloyed with a variety of elements in amounts between 1.0% and 50% by weight, typically to improve its mechanical properties.

Types

[edit]

Alloy steels divide into two groups: low and high alloy. The boundary between the two is disputed. Smith and Hashemi define the difference at 4.0%,[1] while Degarmo, et al., define it at 8.0%.[2] Most alloy steels are low-alloy.

The simplest steels are iron (Fe) alloyed with (0.1% to 1%) carbon (C) and nothing else (excepting slight impurities); these are called carbon steels. However, alloy steel encompasses steels with additional (metal) alloying elements. Common alloyants include manganese (Mn) (the most common), nickel (Ni), chromium (Cr), molybdenum (Mo), vanadium (V), silicon (Si), and boron (B). Less common alloyants include aluminum (Al), cobalt (Co), copper (Cu), cerium (Ce), niobium (Nb), titanium (Ti), tungsten (W), tin (Sn), zinc (Zn), lead (Pb), and zirconium (Zr).

Properties

[edit]

Alloy steels variously improve strength, hardness, toughness, wear resistance, corrosion resistance, hardenability, and hot hardness. To achieve these improved properties the metal may require specific heat treating, combined with strict cooling protocols.

Although alloy steels have been made for centuries, their metallurgy was not well understood until the advancing chemical science of the nineteenth century revealed their compositions. Alloy steels from earlier times were expensive luxuries made on the model of "secret recipes" and forged into tools such as knives and swords. Machine age alloy steels were developed as improved tool steels and as newly available stainless steels. Alloy steels serve many applications, from hand tools and flatware to turbine blades of jet engines and in nuclear reactors.

Because of iron's ferromagnetic properties, some alloys find important applications where their responses to magnetism are very important, including in electric motors and in transformers.

Low-alloy steels

[edit]
Principal low-alloy steels[3]
SAE designation Composition
13xx Mn 1.75%
40xx Mo 0.20% or 0.25% or 0.25% Mo & 0.042% S
41xx Cr 0.50% or 0.80% or 0.95%, Mo 0.12% or 0.20% or 0.25% or 0.30%
43xx Ni 1.82%, Cr 0.50% to 0.80%, Mo 0.25%
44xx Mo 0.40% or 0.52%
46xx Ni 0.85% or 1.82%, Mo 0.20% or 0.25%
47xx Ni 1.05%, Cr 0.45%, Mo 0.20% or 0.35%
48xx Ni 3.50%, Mo 0.25%
50xx Cr 0.27% or 0.40% or 0.50% or 0.65%
50xxx Cr 0.50%, C 1.00% min
50Bxx Cr 0.28% or 0.50%, and added boron
51xx Cr 0.80% or 0.87% or 0.92% or 1.00% or 1.05%
51xxx Cr 1.02%, C 1.00% min
51Bxx Cr 0.80%, and added boron
52xxx Cr 1.45%, C 1.00% min
61xx Cr 0.60% or 0.80% or 0.95%, V 0.10% or 0.15% min
86xx Ni 0.55%, Cr 0.50%, Mo 0.20%
87xx Ni 0.55%, Cr 0.50%, Mo 0.25%
88xx Ni 0.55%, Cr 0.50%, Mo 0.35%
92xx Si 1.40% or 2.00%, Mn 0.65% or 0.82% or 0.85%, Cr 0.00% or 0.65%
94Bxx Ni 0.45%, Cr 0.40%, Mo 0.12%, and added boron
ES-1 Ni 5%, Cr 2%, Si 1.25%, W 1%, Mn 0.85%, Mo 0.55%, Cu 0.5%, Cr 0.40%, C 0.2%, V 0.1%

Material science

[edit]

Alloying elements are added to achieve specific properties in the result. The alloying elements can affect multiple properties—flexibility, strength, formability, and hardenability.[4] As a guideline, alloying elements are added in lower percentages (less than 5%) to increase strength or hardenability, or in larger percentages (over 5%) to achieve properties such as corrosion resistance or extreme temperature stability.[2]

  • Manganese, silicon, or aluminum are added during steelmaking to remove dissolved oxygen, sulfur and phosphorus.
  • Manganese, silicon, nickel, and copper are added to increase strength by forming solid solutions in ferrite.
  • Chromium, vanadium, molybdenum, and tungsten increase strength by forming second-phase carbides.
  • Nickel and copper improve corrosion resistance in small quantities. Molybdenum helps to resist embrittlement.
  • Zirconium, cerium, and calcium increase toughness by controlling the shape of inclusions.
  • Sulfur (in the form of manganese sulfide), lead, bismuth, selenium, and tellurium increase machinability.[5]

The alloying elements tend to form either solid solutions or compounds or carbides.

  • Nickel is soluble in ferrite; therefore, it forms compounds, usually Ni3Al.
  • Aluminum dissolves in ferrite and forms the compounds Al2O3 and AlN. Silicon is also soluble and usually forms the compound SiO2•MxOy.
  • Manganese mostly dissolves in ferrite forming the compounds MnS, MnO•SiO2, but also forms carbides: (Fe,Mn)3C.
  • Chromium forms partitions between the ferrite and carbide phases in steel, forming (Fe,Cr3)C, Cr7C3, and Cr23C6. The type of carbide that chromium forms depends on the amount of carbon and other alloying elements present.
  • Tungsten and molybdenum form carbides given enough carbon and an absence of stronger carbide forming elements (i.e., titanium & niobium), they form the carbides W2C and Mo2C, respectively.
  • Vanadium, titanium, and niobium are strong carbide-forming elements, forming vanadium carbide, titanium carbide, and niobium carbide, respectively.[6]

Alloying elements also have an effect on the eutectoid temperature of the steel.

  • Manganese and nickel lower the eutectoid temperature and are known as austenite stabilizing elements. With enough of these elements the austenitic structure may be obtained at room temperature.
  • Carbide-forming elements raise the eutectoid temperature; these elements are known as ferrite stabilizing elements.[7]
Principal effects of major alloying elements for steel[8]
Element Percentage Primary function
Aluminum 0.95–1.30 Alloying element in nitriding steels
Bismuth Improves machinability
Boron 0.001–0.003 (Boron steel) A powerful hardenability agent
Chromium 0.5–2 Increases hardenability
4–18 Increases corrosion resistance
Copper 0.1–0.4 Corrosion resistance
Lead Improved machinability
Manganese 0.25–0.40 Combines with sulfur and with phosphorus to reduce brittleness. Also helps to remove excess oxygen.
>1 Increases hardenability by lowering transformation points and causing transformations to be sluggish
Molybdenum 0.2–5 Stable carbides; inhibits grain growth. Increases the toughness of steel, thus making molybdenum a very valuable alloy metal for making the cutting parts of machine tools and also the turbine blades of turbojet engines. Also used in rocket motors.
Nickel 2–5 Toughener
12–20 Increases corrosion resistance
Niobium Stabilizes microstructure
Silicon 0.2–0.7 Increases strength
2.0 Spring steels
Higher percentages Improves magnetic properties
Sulfur 0.08–0.15 Free-machining properties
Titanium Fixes carbon in inert particles; reduces martensitic hardness in chromium steels
Tungsten Also increases the melting point.
Vanadium 0.15 Stable carbides; increases strength while retaining ductility; promotes fine grain structure. Increases the toughness at high temperatures

Microstructure

[edit]

The properties of steel depend on its microstructure: the arrangement of different phases, some harder, some with greater ductility. At the atomic level, the four phases of auto steel include martensite (the hardest yet most brittle), bainite (less hard), ferrite (more ductile), and austenite (the most ductile). The phases are arranged by steelmakers by manipulating intervals (sometimes by seconds only) and temperatures of the heating and cooling process.[9]

Transformation-induced plasticity

[edit]

TRIP steels transform under deformation from relatively ductile to relatively hard under deformation such as a car crash. Such deformation transforms austenitic microstructure to martensitic microstructure. TRIP steels use relatively high carbon content to create the austenitic microstructure. Relatively high silicon/aluminum content suppresses carbide precipitation in the bainite region and helps accelerate ferrite/bainite formation. This helps retain carbon to support austenite at room temperature. A specific cooling process reduces the austenite/martensite transformation during forming. TRIP steels typically require an isothermal hold at an intermediate temperature during cooling, which produces some bainite. The additional silicon/carbon requirements requires weld cycle modification, such as the use of pulsating welding or dilution welding.[10]

In one approach steel is heated to a high temperature, cooled somewhat, held stable for an interval and then quenched. This produces islands of austenite surrounded by a matrix of softer ferrite, with regions of harder bainite and martensite. The resulting product can absorb energy without fracturing, making it useful for auto parts such as bumpers and pillars. Three generations of advanced, high-strength steel are available. The first was created in the 1990s, increasing strength and ductility. A second generation used new alloys to further increase ductility, but were expensive and difficult to manufacture. The third generation is beginning to be adopted. Refined heating and cooling patterns increase both strength at some cost in ductility (vs 2nd generation). These steels are claimed to approach nearly ten times the strength of earlier steels; and are much cheaper to manufacture.[10]

See also

[edit]

References

[edit]
  1. ^ Smith & Hashemi 2001, p. 393.
  2. ^ a b Degarmo, Black & Kohser 2007, p. 112.
  3. ^ Smith & Hashemi 2001, p. 394.
  4. ^ "What Are the Different Types of Steel? | Metal Exponents Blog". Metal Exponents. 2020-08-18. Retrieved 2021-01-29.
  5. ^ Degarmo, Black & Kohser 2007, p. 113.
  6. ^ Smith & Hashemi 2001, pp. 394–395.
  7. ^ Smith & Hashemi 2001, pp. 395–396.
  8. ^ Degarmo, Black & Kohser 2007, p. 144.
  9. ^ Johnson, Jr, John (2024-08-05). "New forms of steel for stronger, lighter cars". Knowable Magazine. doi:10.1146/knowable-080524-1.
  10. ^ a b Hickey, Kate (2021-06-23). "Transformation Induced Plasticity (TRIP)". AHSS Guidelines. Retrieved 2024-08-21.

Bibliography

[edit]