Amazon EC2 Container Service 2014-11-13
- Client: Aws\Ecs\EcsClient
- Service ID: ecs
- Version: 2014-11-13
This page describes the parameters and results for the operations of the Amazon EC2 Container Service (2014-11-13), and shows how to use the Aws\Ecs\EcsClient object to call the described operations. This documentation is specific to the 2014-11-13 API version of the service.
Operation Summary
Each of the following operations can be created from a client using
$client->getCommand('CommandName')
, where "CommandName" is the
name of one of the following operations. Note: a command is a value that
encapsulates an operation and the parameters used to create an HTTP request.
You can also create and send a command immediately using the magic methods
available on a client object: $client->commandName(/* parameters */)
.
You can send the command asynchronously (returning a promise) by appending the
word "Async" to the operation name: $client->commandNameAsync(/* parameters */)
.
- CreateCapacityProvider ( array $params = [] )
- Creates a new capacity provider.
- CreateCluster ( array $params = [] )
- Creates a new Amazon ECS cluster.
- CreateService ( array $params = [] )
- Runs and maintains your desired number of tasks from a specified task definition.
- CreateTaskSet ( array $params = [] )
- Create a task set in the specified cluster and service.
- DeleteAccountSetting ( array $params = [] )
- Disables an account setting for a specified user, role, or the root user for an account.
- DeleteAttributes ( array $params = [] )
- Deletes one or more custom attributes from an Amazon ECS resource.
- DeleteCapacityProvider ( array $params = [] )
- Deletes the specified capacity provider.
- DeleteCluster ( array $params = [] )
- Deletes the specified cluster.
- DeleteService ( array $params = [] )
- Deletes a specified service within a cluster.
- DeleteTaskDefinitions ( array $params = [] )
- Deletes one or more task definitions.
- DeleteTaskSet ( array $params = [] )
- Deletes a specified task set within a service.
- DeregisterContainerInstance ( array $params = [] )
- Deregisters an Amazon ECS container instance from the specified cluster.
- DeregisterTaskDefinition ( array $params = [] )
- Deregisters the specified task definition by family and revision.
- DescribeCapacityProviders ( array $params = [] )
- Describes one or more of your capacity providers.
- DescribeClusters ( array $params = [] )
- Describes one or more of your clusters.
- DescribeContainerInstances ( array $params = [] )
- Describes one or more container instances.
- DescribeServiceDeployments ( array $params = [] )
- Describes one or more of your service deployments.
- DescribeServiceRevisions ( array $params = [] )
- Describes one or more service revisions.
- DescribeServices ( array $params = [] )
- Describes the specified services running in your cluster.
- DescribeTaskDefinition ( array $params = [] )
- Describes a task definition.
- DescribeTaskSets ( array $params = [] )
- Describes the task sets in the specified cluster and service.
- DescribeTasks ( array $params = [] )
- Describes a specified task or tasks.
- DiscoverPollEndpoint ( array $params = [] )
- This action is only used by the Amazon ECS agent, and it is not intended for use outside of the agent.
- ExecuteCommand ( array $params = [] )
- Runs a command remotely on a container within a task.
- GetTaskProtection ( array $params = [] )
- Retrieves the protection status of tasks in an Amazon ECS service.
- ListAccountSettings ( array $params = [] )
- Lists the account settings for a specified principal.
- ListAttributes ( array $params = [] )
- Lists the attributes for Amazon ECS resources within a specified target type and cluster.
- ListClusters ( array $params = [] )
- Returns a list of existing clusters.
- ListContainerInstances ( array $params = [] )
- Returns a list of container instances in a specified cluster.
- ListServiceDeployments ( array $params = [] )
- This operation lists all the service deployments that meet the specified filter criteria.
- ListServices ( array $params = [] )
- Returns a list of services.
- ListServicesByNamespace ( array $params = [] )
- This operation lists all of the services that are associated with a Cloud Map namespace.
- ListTagsForResource ( array $params = [] )
- List the tags for an Amazon ECS resource.
- ListTaskDefinitionFamilies ( array $params = [] )
- Returns a list of task definition families that are registered to your account.
- ListTaskDefinitions ( array $params = [] )
- Returns a list of task definitions that are registered to your account.
- ListTasks ( array $params = [] )
- Returns a list of tasks.
- PutAccountSetting ( array $params = [] )
- Modifies an account setting.
- PutAccountSettingDefault ( array $params = [] )
- Modifies an account setting for all users on an account for whom no individual account setting has been specified.
- PutAttributes ( array $params = [] )
- Create or update an attribute on an Amazon ECS resource.
- PutClusterCapacityProviders ( array $params = [] )
- Modifies the available capacity providers and the default capacity provider strategy for a cluster.
- RegisterContainerInstance ( array $params = [] )
- This action is only used by the Amazon ECS agent, and it is not intended for use outside of the agent.
- RegisterTaskDefinition ( array $params = [] )
- Registers a new task definition from the supplied family and containerDefinitions.
- RunTask ( array $params = [] )
- Starts a new task using the specified task definition.
- StartTask ( array $params = [] )
- Starts a new task from the specified task definition on the specified container instance or instances.
- StopTask ( array $params = [] )
- Stops a running task.
- SubmitAttachmentStateChanges ( array $params = [] )
- This action is only used by the Amazon ECS agent, and it is not intended for use outside of the agent.
- SubmitContainerStateChange ( array $params = [] )
- This action is only used by the Amazon ECS agent, and it is not intended for use outside of the agent.
- SubmitTaskStateChange ( array $params = [] )
- This action is only used by the Amazon ECS agent, and it is not intended for use outside of the agent.
- TagResource ( array $params = [] )
- Associates the specified tags to a resource with the specified resourceArn.
- UntagResource ( array $params = [] )
- Deletes specified tags from a resource.
- UpdateCapacityProvider ( array $params = [] )
- Modifies the parameters for a capacity provider.
- UpdateCluster ( array $params = [] )
- Updates the cluster.
- UpdateClusterSettings ( array $params = [] )
- Modifies the settings to use for a cluster.
- UpdateContainerAgent ( array $params = [] )
- Updates the Amazon ECS container agent on a specified container instance.
- UpdateContainerInstancesState ( array $params = [] )
- Modifies the status of an Amazon ECS container instance.
- UpdateService ( array $params = [] )
- Modifies the parameters of a service.
- UpdateServicePrimaryTaskSet ( array $params = [] )
- Modifies which task set in a service is the primary task set.
- UpdateTaskProtection ( array $params = [] )
- Updates the protection status of a task.
- UpdateTaskSet ( array $params = [] )
- Modifies a task set.
Paginators
Paginators handle automatically iterating over paginated API results. Paginators are associated with specific API operations, and they accept the parameters that the corresponding API operation accepts. You can get a paginator from a client class using getPaginator($paginatorName, $operationParameters). This client supports the following paginators:
- ListAccountSettings
- ListAttributes
- ListClusters
- ListContainerInstances
- ListServices
- ListServicesByNamespace
- ListTaskDefinitionFamilies
- ListTaskDefinitions
- ListTasks
Waiters
Waiters allow you to poll a resource until it enters into a desired state. A waiter has a name used to describe what it does, and is associated with an API operation. When creating a waiter, you can provide the API operation parameters associated with the corresponding operation. Waiters can be accessed using the getWaiter($waiterName, $operationParameters) method of a client object. This client supports the following waiters:
Waiter name | API Operation | Delay | Max Attempts |
---|---|---|---|
TasksRunning | DescribeTasks | 6 | 100 |
TasksStopped | DescribeTasks | 6 | 100 |
ServicesStable | DescribeServices | 15 | 40 |
ServicesInactive | DescribeServices | 15 | 40 |
Operations
CreateCapacityProvider
$result = $client->createCapacityProvider
([/* ... */]); $promise = $client->createCapacityProviderAsync
([/* ... */]);
Creates a new capacity provider. Capacity providers are associated with an Amazon ECS cluster and are used in capacity provider strategies to facilitate cluster auto scaling.
Only capacity providers that use an Auto Scaling group can be created. Amazon ECS tasks on Fargate use the FARGATE
and FARGATE_SPOT
capacity providers. These providers are available to all accounts in the Amazon Web Services Regions that Fargate supports.
Parameter Syntax
$result = $client->createCapacityProvider([ 'autoScalingGroupProvider' => [ // REQUIRED 'autoScalingGroupArn' => '<string>', // REQUIRED 'managedDraining' => 'ENABLED|DISABLED', 'managedScaling' => [ 'instanceWarmupPeriod' => <integer>, 'maximumScalingStepSize' => <integer>, 'minimumScalingStepSize' => <integer>, 'status' => 'ENABLED|DISABLED', 'targetCapacity' => <integer>, ], 'managedTerminationProtection' => 'ENABLED|DISABLED', ], 'name' => '<string>', // REQUIRED 'tags' => [ [ 'key' => '<string>', 'value' => '<string>', ], // ... ], ]);
Parameter Details
Members
- autoScalingGroupProvider
-
- Required: Yes
- Type: AutoScalingGroupProvider structure
The details of the Auto Scaling group for the capacity provider.
- name
-
- Required: Yes
- Type: string
The name of the capacity provider. Up to 255 characters are allowed. They include letters (both upper and lowercase letters), numbers, underscores (_), and hyphens (-). The name can't be prefixed with "
aws
", "ecs
", or "fargate
". - tags
-
- Type: Array of Tag structures
The metadata that you apply to the capacity provider to categorize and organize them more conveniently. Each tag consists of a key and an optional value. You define both of them.
The following basic restrictions apply to tags:
-
Maximum number of tags per resource - 50
-
For each resource, each tag key must be unique, and each tag key can have only one value.
-
Maximum key length - 128 Unicode characters in UTF-8
-
Maximum value length - 256 Unicode characters in UTF-8
-
If your tagging schema is used across multiple services and resources, remember that other services may have restrictions on allowed characters. Generally allowed characters are: letters, numbers, and spaces representable in UTF-8, and the following characters: + - = . _ : / @.
-
Tag keys and values are case-sensitive.
-
Do not use
aws:
,AWS:
, or any upper or lowercase combination of such as a prefix for either keys or values as it is reserved for Amazon Web Services use. You cannot edit or delete tag keys or values with this prefix. Tags with this prefix do not count against your tags per resource limit.
Result Syntax
[ 'capacityProvider' => [ 'autoScalingGroupProvider' => [ 'autoScalingGroupArn' => '<string>', 'managedDraining' => 'ENABLED|DISABLED', 'managedScaling' => [ 'instanceWarmupPeriod' => <integer>, 'maximumScalingStepSize' => <integer>, 'minimumScalingStepSize' => <integer>, 'status' => 'ENABLED|DISABLED', 'targetCapacity' => <integer>, ], 'managedTerminationProtection' => 'ENABLED|DISABLED', ], 'capacityProviderArn' => '<string>', 'name' => '<string>', 'status' => 'ACTIVE|INACTIVE', 'tags' => [ [ 'key' => '<string>', 'value' => '<string>', ], // ... ], 'updateStatus' => 'DELETE_IN_PROGRESS|DELETE_COMPLETE|DELETE_FAILED|UPDATE_IN_PROGRESS|UPDATE_COMPLETE|UPDATE_FAILED', 'updateStatusReason' => '<string>', ], ]
Result Details
Members
- capacityProvider
-
- Type: CapacityProvider structure
The full description of the new capacity provider.
Errors
- ServerException:
These errors are usually caused by a server issue.
- ClientException:
These errors are usually caused by a client action. This client action might be using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be specifying an identifier that isn't valid.
The following list includes additional causes for the error:
-
The
RunTask
could not be processed because you use managed scaling and there is a capacity error because the quota of tasks in thePROVISIONING
per cluster has been reached. For information about the service quotas, see Amazon ECS service quotas.
-
- InvalidParameterException:
The specified parameter isn't valid. Review the available parameters for the API request.
- LimitExceededException:
The limit for the resource was exceeded.
- UpdateInProgressException:
There's already a current Amazon ECS container agent update in progress on the container instance that's specified. If the container agent becomes disconnected while it's in a transitional stage, such as
PENDING
orSTAGING
, the update process can get stuck in that state. However, when the agent reconnects, it resumes where it stopped previously.
CreateCluster
$result = $client->createCluster
([/* ... */]); $promise = $client->createClusterAsync
([/* ... */]);
Creates a new Amazon ECS cluster. By default, your account receives a default
cluster when you launch your first container instance. However, you can create your own cluster with a unique name.
When you call the CreateCluster API operation, Amazon ECS attempts to create the Amazon ECS service-linked role for your account. This is so that it can manage required resources in other Amazon Web Services services on your behalf. However, if the user that makes the call doesn't have permissions to create the service-linked role, it isn't created. For more information, see Using service-linked roles for Amazon ECS in the Amazon Elastic Container Service Developer Guide.
Parameter Syntax
$result = $client->createCluster([ 'capacityProviders' => ['<string>', ...], 'clusterName' => '<string>', 'configuration' => [ 'executeCommandConfiguration' => [ 'kmsKeyId' => '<string>', 'logConfiguration' => [ 'cloudWatchEncryptionEnabled' => true || false, 'cloudWatchLogGroupName' => '<string>', 's3BucketName' => '<string>', 's3EncryptionEnabled' => true || false, 's3KeyPrefix' => '<string>', ], 'logging' => 'NONE|DEFAULT|OVERRIDE', ], 'managedStorageConfiguration' => [ 'fargateEphemeralStorageKmsKeyId' => '<string>', 'kmsKeyId' => '<string>', ], ], 'defaultCapacityProviderStrategy' => [ [ 'base' => <integer>, 'capacityProvider' => '<string>', // REQUIRED 'weight' => <integer>, ], // ... ], 'serviceConnectDefaults' => [ 'namespace' => '<string>', // REQUIRED ], 'settings' => [ [ 'name' => 'containerInsights', 'value' => '<string>', ], // ... ], 'tags' => [ [ 'key' => '<string>', 'value' => '<string>', ], // ... ], ]);
Parameter Details
Members
- capacityProviders
-
- Type: Array of strings
The short name of one or more capacity providers to associate with the cluster. A capacity provider must be associated with a cluster before it can be included as part of the default capacity provider strategy of the cluster or used in a capacity provider strategy when calling the CreateService or RunTask actions.
If specifying a capacity provider that uses an Auto Scaling group, the capacity provider must be created but not associated with another cluster. New Auto Scaling group capacity providers can be created with the CreateCapacityProvider API operation.
To use a Fargate capacity provider, specify either the
FARGATE
orFARGATE_SPOT
capacity providers. The Fargate capacity providers are available to all accounts and only need to be associated with a cluster to be used.The PutCapacityProvider API operation is used to update the list of available capacity providers for a cluster after the cluster is created.
- clusterName
-
- Type: string
The name of your cluster. If you don't specify a name for your cluster, you create a cluster that's named
default
. Up to 255 letters (uppercase and lowercase), numbers, underscores, and hyphens are allowed. - configuration
-
- Type: ClusterConfiguration structure
The
execute
command configuration for the cluster. - defaultCapacityProviderStrategy
-
- Type: Array of CapacityProviderStrategyItem structures
The capacity provider strategy to set as the default for the cluster. After a default capacity provider strategy is set for a cluster, when you call the CreateService or RunTask APIs with no capacity provider strategy or launch type specified, the default capacity provider strategy for the cluster is used.
If a default capacity provider strategy isn't defined for a cluster when it was created, it can be defined later with the PutClusterCapacityProviders API operation.
- serviceConnectDefaults
-
- Type: ClusterServiceConnectDefaultsRequest structure
Use this parameter to set a default Service Connect namespace. After you set a default Service Connect namespace, any new services with Service Connect turned on that are created in the cluster are added as client services in the namespace. This setting only applies to new services that set the
enabled
parameter totrue
in theServiceConnectConfiguration
. You can set the namespace of each service individually in theServiceConnectConfiguration
to override this default parameter.Tasks that run in a namespace can use short names to connect to services in the namespace. Tasks can connect to services across all of the clusters in the namespace. Tasks connect through a managed proxy container that collects logs and metrics for increased visibility. Only the tasks that Amazon ECS services create are supported with Service Connect. For more information, see Service Connect in the Amazon Elastic Container Service Developer Guide.
- settings
-
- Type: Array of ClusterSetting structures
The setting to use when creating a cluster. This parameter is used to turn on CloudWatch Container Insights for a cluster. If this value is specified, it overrides the
containerInsights
value set with PutAccountSetting or PutAccountSettingDefault. - tags
-
- Type: Array of Tag structures
The metadata that you apply to the cluster to help you categorize and organize them. Each tag consists of a key and an optional value. You define both.
The following basic restrictions apply to tags:
-
Maximum number of tags per resource - 50
-
For each resource, each tag key must be unique, and each tag key can have only one value.
-
Maximum key length - 128 Unicode characters in UTF-8
-
Maximum value length - 256 Unicode characters in UTF-8
-
If your tagging schema is used across multiple services and resources, remember that other services may have restrictions on allowed characters. Generally allowed characters are: letters, numbers, and spaces representable in UTF-8, and the following characters: + - = . _ : / @.
-
Tag keys and values are case-sensitive.
-
Do not use
aws:
,AWS:
, or any upper or lowercase combination of such as a prefix for either keys or values as it is reserved for Amazon Web Services use. You cannot edit or delete tag keys or values with this prefix. Tags with this prefix do not count against your tags per resource limit.
Result Syntax
[ 'cluster' => [ 'activeServicesCount' => <integer>, 'attachments' => [ [ 'details' => [ [ 'name' => '<string>', 'value' => '<string>', ], // ... ], 'id' => '<string>', 'status' => '<string>', 'type' => '<string>', ], // ... ], 'attachmentsStatus' => '<string>', 'capacityProviders' => ['<string>', ...], 'clusterArn' => '<string>', 'clusterName' => '<string>', 'configuration' => [ 'executeCommandConfiguration' => [ 'kmsKeyId' => '<string>', 'logConfiguration' => [ 'cloudWatchEncryptionEnabled' => true || false, 'cloudWatchLogGroupName' => '<string>', 's3BucketName' => '<string>', 's3EncryptionEnabled' => true || false, 's3KeyPrefix' => '<string>', ], 'logging' => 'NONE|DEFAULT|OVERRIDE', ], 'managedStorageConfiguration' => [ 'fargateEphemeralStorageKmsKeyId' => '<string>', 'kmsKeyId' => '<string>', ], ], 'defaultCapacityProviderStrategy' => [ [ 'base' => <integer>, 'capacityProvider' => '<string>', 'weight' => <integer>, ], // ... ], 'pendingTasksCount' => <integer>, 'registeredContainerInstancesCount' => <integer>, 'runningTasksCount' => <integer>, 'serviceConnectDefaults' => [ 'namespace' => '<string>', ], 'settings' => [ [ 'name' => 'containerInsights', 'value' => '<string>', ], // ... ], 'statistics' => [ [ 'name' => '<string>', 'value' => '<string>', ], // ... ], 'status' => '<string>', 'tags' => [ [ 'key' => '<string>', 'value' => '<string>', ], // ... ], ], ]
Result Details
Members
- cluster
-
- Type: Cluster structure
The full description of your new cluster.
Errors
- ServerException:
These errors are usually caused by a server issue.
- ClientException:
These errors are usually caused by a client action. This client action might be using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be specifying an identifier that isn't valid.
The following list includes additional causes for the error:
-
The
RunTask
could not be processed because you use managed scaling and there is a capacity error because the quota of tasks in thePROVISIONING
per cluster has been reached. For information about the service quotas, see Amazon ECS service quotas.
-
- InvalidParameterException:
The specified parameter isn't valid. Review the available parameters for the API request.
- NamespaceNotFoundException:
The specified namespace wasn't found.
Examples
Example 1: To create a new cluster
This example creates a cluster in your default region.
$result = $client->createCluster([ 'clusterName' => 'my_cluster', ]);
Result syntax:
[ 'cluster' => [ 'activeServicesCount' => 0, 'clusterArn' => 'arn:aws:ecs:us-east-1:012345678910:cluster/my_cluster', 'clusterName' => 'my_cluster', 'pendingTasksCount' => 0, 'registeredContainerInstancesCount' => 0, 'runningTasksCount' => 0, 'status' => 'ACTIVE', ], ]
CreateService
$result = $client->createService
([/* ... */]); $promise = $client->createServiceAsync
([/* ... */]);
Runs and maintains your desired number of tasks from a specified task definition. If the number of tasks running in a service drops below the desiredCount
, Amazon ECS runs another copy of the task in the specified cluster. To update an existing service, see the UpdateService action.
On March 21, 2024, a change was made to resolve the task definition revision before authorization. When a task definition revision is not specified, authorization will occur using the latest revision of a task definition.
Amazon Elastic Inference (EI) is no longer available to customers.
In addition to maintaining the desired count of tasks in your service, you can optionally run your service behind one or more load balancers. The load balancers distribute traffic across the tasks that are associated with the service. For more information, see Service load balancing in the Amazon Elastic Container Service Developer Guide.
You can attach Amazon EBS volumes to Amazon ECS tasks by configuring the volume when creating or updating a service. volumeConfigurations
is only supported for REPLICA service and not DAEMON service. For more infomation, see Amazon EBS volumes in the Amazon Elastic Container Service Developer Guide.
Tasks for services that don't use a load balancer are considered healthy if they're in the RUNNING
state. Tasks for services that use a load balancer are considered healthy if they're in the RUNNING
state and are reported as healthy by the load balancer.
There are two service scheduler strategies available:
-
REPLICA
- The replica scheduling strategy places and maintains your desired number of tasks across your cluster. By default, the service scheduler spreads tasks across Availability Zones. You can use task placement strategies and constraints to customize task placement decisions. For more information, see Service scheduler concepts in the Amazon Elastic Container Service Developer Guide. -
DAEMON
- The daemon scheduling strategy deploys exactly one task on each active container instance that meets all of the task placement constraints that you specify in your cluster. The service scheduler also evaluates the task placement constraints for running tasks. It also stops tasks that don't meet the placement constraints. When using this strategy, you don't need to specify a desired number of tasks, a task placement strategy, or use Service Auto Scaling policies. For more information, see Service scheduler concepts in the Amazon Elastic Container Service Developer Guide.
You can optionally specify a deployment configuration for your service. The deployment is initiated by changing properties. For example, the deployment might be initiated by the task definition or by your desired count of a service. You can use UpdateService. The default value for a replica service for minimumHealthyPercent
is 100%. The default value for a daemon service for minimumHealthyPercent
is 0%.
If a service uses the ECS
deployment controller, the minimum healthy percent represents a lower limit on the number of tasks in a service that must remain in the RUNNING
state during a deployment. Specifically, it represents it as a percentage of your desired number of tasks (rounded up to the nearest integer). This happens when any of your container instances are in the DRAINING
state if the service contains tasks using the EC2 launch type. Using this parameter, you can deploy without using additional cluster capacity. For example, if you set your service to have desired number of four tasks and a minimum healthy percent of 50%, the scheduler might stop two existing tasks to free up cluster capacity before starting two new tasks. If they're in the RUNNING
state, tasks for services that don't use a load balancer are considered healthy . If they're in the RUNNING
state and reported as healthy by the load balancer, tasks for services that do use a load balancer are considered healthy . The default value for minimum healthy percent is 100%.
If a service uses the ECS
deployment controller, the maximum percent parameter represents an upper limit on the number of tasks in a service that are allowed in the RUNNING
or PENDING
state during a deployment. Specifically, it represents it as a percentage of the desired number of tasks (rounded down to the nearest integer). This happens when any of your container instances are in the DRAINING
state if the service contains tasks using the EC2 launch type. Using this parameter, you can define the deployment batch size. For example, if your service has a desired number of four tasks and a maximum percent value of 200%, the scheduler may start four new tasks before stopping the four older tasks (provided that the cluster resources required to do this are available). The default value for maximum percent is 200%.
If a service uses either the CODE_DEPLOY
or EXTERNAL
deployment controller types and tasks that use the EC2 launch type, the minimum healthy percent and maximum percent values are used only to define the lower and upper limit on the number of the tasks in the service that remain in the RUNNING
state. This is while the container instances are in the DRAINING
state. If the tasks in the service use the Fargate launch type, the minimum healthy percent and maximum percent values aren't used. This is the case even if they're currently visible when describing your service.
When creating a service that uses the EXTERNAL
deployment controller, you can specify only parameters that aren't controlled at the task set level. The only required parameter is the service name. You control your services using the CreateTaskSet. For more information, see Amazon ECS deployment types in the Amazon Elastic Container Service Developer Guide.
When the service scheduler launches new tasks, it determines task placement. For information about task placement and task placement strategies, see Amazon ECS task placement in the Amazon Elastic Container Service Developer Guide
Parameter Syntax
$result = $client->createService([ 'capacityProviderStrategy' => [ [ 'base' => <integer>, 'capacityProvider' => '<string>', // REQUIRED 'weight' => <integer>, ], // ... ], 'clientToken' => '<string>', 'cluster' => '<string>', 'deploymentConfiguration' => [ 'alarms' => [ 'alarmNames' => ['<string>', ...], // REQUIRED 'enable' => true || false, // REQUIRED 'rollback' => true || false, // REQUIRED ], 'deploymentCircuitBreaker' => [ 'enable' => true || false, // REQUIRED 'rollback' => true || false, // REQUIRED ], 'maximumPercent' => <integer>, 'minimumHealthyPercent' => <integer>, ], 'deploymentController' => [ 'type' => 'ECS|CODE_DEPLOY|EXTERNAL', // REQUIRED ], 'desiredCount' => <integer>, 'enableECSManagedTags' => true || false, 'enableExecuteCommand' => true || false, 'healthCheckGracePeriodSeconds' => <integer>, 'launchType' => 'EC2|FARGATE|EXTERNAL', 'loadBalancers' => [ [ 'containerName' => '<string>', 'containerPort' => <integer>, 'loadBalancerName' => '<string>', 'targetGroupArn' => '<string>', ], // ... ], 'networkConfiguration' => [ 'awsvpcConfiguration' => [ 'assignPublicIp' => 'ENABLED|DISABLED', 'securityGroups' => ['<string>', ...], 'subnets' => ['<string>', ...], // REQUIRED ], ], 'placementConstraints' => [ [ 'expression' => '<string>', 'type' => 'distinctInstance|memberOf', ], // ... ], 'placementStrategy' => [ [ 'field' => '<string>', 'type' => 'random|spread|binpack', ], // ... ], 'platformVersion' => '<string>', 'propagateTags' => 'TASK_DEFINITION|SERVICE|NONE', 'role' => '<string>', 'schedulingStrategy' => 'REPLICA|DAEMON', 'serviceConnectConfiguration' => [ 'enabled' => true || false, // REQUIRED 'logConfiguration' => [ 'logDriver' => 'json-file|syslog|journald|gelf|fluentd|awslogs|splunk|awsfirelens', // REQUIRED 'options' => ['<string>', ...], 'secretOptions' => [ [ 'name' => '<string>', // REQUIRED 'valueFrom' => '<string>', // REQUIRED ], // ... ], ], 'namespace' => '<string>', 'services' => [ [ 'clientAliases' => [ [ 'dnsName' => '<string>', 'port' => <integer>, // REQUIRED ], // ... ], 'discoveryName' => '<string>', 'ingressPortOverride' => <integer>, 'portName' => '<string>', // REQUIRED 'timeout' => [ 'idleTimeoutSeconds' => <integer>, 'perRequestTimeoutSeconds' => <integer>, ], 'tls' => [ 'issuerCertificateAuthority' => [ // REQUIRED 'awsPcaAuthorityArn' => '<string>', ], 'kmsKey' => '<string>', 'roleArn' => '<string>', ], ], // ... ], ], 'serviceName' => '<string>', // REQUIRED 'serviceRegistries' => [ [ 'containerName' => '<string>', 'containerPort' => <integer>, 'port' => <integer>, 'registryArn' => '<string>', ], // ... ], 'tags' => [ [ 'key' => '<string>', 'value' => '<string>', ], // ... ], 'taskDefinition' => '<string>', 'volumeConfigurations' => [ [ 'managedEBSVolume' => [ 'encrypted' => true || false, 'filesystemType' => 'ext3|ext4|xfs|ntfs', 'iops' => <integer>, 'kmsKeyId' => '<string>', 'roleArn' => '<string>', // REQUIRED 'sizeInGiB' => <integer>, 'snapshotId' => '<string>', 'tagSpecifications' => [ [ 'propagateTags' => 'TASK_DEFINITION|SERVICE|NONE', 'resourceType' => 'volume', // REQUIRED 'tags' => [ [ 'key' => '<string>', 'value' => '<string>', ], // ... ], ], // ... ], 'throughput' => <integer>, 'volumeType' => '<string>', ], 'name' => '<string>', // REQUIRED ], // ... ], ]);
Parameter Details
Members
- capacityProviderStrategy
-
- Type: Array of CapacityProviderStrategyItem structures
The capacity provider strategy to use for the service.
If a
capacityProviderStrategy
is specified, thelaunchType
parameter must be omitted. If nocapacityProviderStrategy
orlaunchType
is specified, thedefaultCapacityProviderStrategy
for the cluster is used.A capacity provider strategy may contain a maximum of 6 capacity providers.
- clientToken
-
- Type: string
An identifier that you provide to ensure the idempotency of the request. It must be unique and is case sensitive. Up to 36 ASCII characters in the range of 33-126 (inclusive) are allowed.
- cluster
-
- Type: string
The short name or full Amazon Resource Name (ARN) of the cluster that you run your service on. If you do not specify a cluster, the default cluster is assumed.
- deploymentConfiguration
-
- Type: DeploymentConfiguration structure
Optional deployment parameters that control how many tasks run during the deployment and the failure detection methods.
- deploymentController
-
- Type: DeploymentController structure
The deployment controller to use for the service. If no deployment controller is specified, the default value of
ECS
is used. - desiredCount
-
- Type: int
The number of instantiations of the specified task definition to place and keep running in your service.
This is required if
schedulingStrategy
isREPLICA
or isn't specified. IfschedulingStrategy
isDAEMON
then this isn't required. - enableECSManagedTags
-
- Type: boolean
Specifies whether to turn on Amazon ECS managed tags for the tasks within the service. For more information, see Tagging your Amazon ECS resources in the Amazon Elastic Container Service Developer Guide.
When you use Amazon ECS managed tags, you need to set the
propagateTags
request parameter. - enableExecuteCommand
-
- Type: boolean
Determines whether the execute command functionality is turned on for the service. If
true
, this enables execute command functionality on all containers in the service tasks. - healthCheckGracePeriodSeconds
-
- Type: int
The period of time, in seconds, that the Amazon ECS service scheduler ignores unhealthy Elastic Load Balancing target health checks after a task has first started. This is only used when your service is configured to use a load balancer. If your service has a load balancer defined and you don't specify a health check grace period value, the default value of
0
is used.If you do not use an Elastic Load Balancing, we recommend that you use the
startPeriod
in the task definition health check parameters. For more information, see Health check.If your service's tasks take a while to start and respond to Elastic Load Balancing health checks, you can specify a health check grace period of up to 2,147,483,647 seconds (about 69 years). During that time, the Amazon ECS service scheduler ignores health check status. This grace period can prevent the service scheduler from marking tasks as unhealthy and stopping them before they have time to come up.
- launchType
-
- Type: string
The infrastructure that you run your service on. For more information, see Amazon ECS launch types in the Amazon Elastic Container Service Developer Guide.
The
FARGATE
launch type runs your tasks on Fargate On-Demand infrastructure.Fargate Spot infrastructure is available for use but a capacity provider strategy must be used. For more information, see Fargate capacity providers in the Amazon ECS Developer Guide.
The
EC2
launch type runs your tasks on Amazon EC2 instances registered to your cluster.The
EXTERNAL
launch type runs your tasks on your on-premises server or virtual machine (VM) capacity registered to your cluster.A service can use either a launch type or a capacity provider strategy. If a
launchType
is specified, thecapacityProviderStrategy
parameter must be omitted. - loadBalancers
-
- Type: Array of LoadBalancer structures
A load balancer object representing the load balancers to use with your service. For more information, see Service load balancing in the Amazon Elastic Container Service Developer Guide.
If the service uses the rolling update (
ECS
) deployment controller and using either an Application Load Balancer or Network Load Balancer, you must specify one or more target group ARNs to attach to the service. The service-linked role is required for services that use multiple target groups. For more information, see Using service-linked roles for Amazon ECS in the Amazon Elastic Container Service Developer Guide.If the service uses the
CODE_DEPLOY
deployment controller, the service is required to use either an Application Load Balancer or Network Load Balancer. When creating an CodeDeploy deployment group, you specify two target groups (referred to as atargetGroupPair
). During a deployment, CodeDeploy determines which task set in your service has the statusPRIMARY
, and it associates one target group with it. Then, it also associates the other target group with the replacement task set. The load balancer can also have up to two listeners: a required listener for production traffic and an optional listener that you can use to perform validation tests with Lambda functions before routing production traffic to it.If you use the
CODE_DEPLOY
deployment controller, these values can be changed when updating the service.For Application Load Balancers and Network Load Balancers, this object must contain the load balancer target group ARN, the container name, and the container port to access from the load balancer. The container name must be as it appears in a container definition. The load balancer name parameter must be omitted. When a task from this service is placed on a container instance, the container instance and port combination is registered as a target in the target group that's specified here.
For Classic Load Balancers, this object must contain the load balancer name, the container name , and the container port to access from the load balancer. The container name must be as it appears in a container definition. The target group ARN parameter must be omitted. When a task from this service is placed on a container instance, the container instance is registered with the load balancer that's specified here.
Services with tasks that use the
awsvpc
network mode (for example, those with the Fargate launch type) only support Application Load Balancers and Network Load Balancers. Classic Load Balancers aren't supported. Also, when you create any target groups for these services, you must chooseip
as the target type, notinstance
. This is because tasks that use theawsvpc
network mode are associated with an elastic network interface, not an Amazon EC2 instance. - networkConfiguration
-
- Type: NetworkConfiguration structure
The network configuration for the service. This parameter is required for task definitions that use the
awsvpc
network mode to receive their own elastic network interface, and it isn't supported for other network modes. For more information, see Task networking in the Amazon Elastic Container Service Developer Guide. - placementConstraints
-
- Type: Array of PlacementConstraint structures
An array of placement constraint objects to use for tasks in your service. You can specify a maximum of 10 constraints for each task. This limit includes constraints in the task definition and those specified at runtime.
- placementStrategy
-
- Type: Array of PlacementStrategy structures
The placement strategy objects to use for tasks in your service. You can specify a maximum of 5 strategy rules for each service.
- platformVersion
-
- Type: string
The platform version that your tasks in the service are running on. A platform version is specified only for tasks using the Fargate launch type. If one isn't specified, the
LATEST
platform version is used. For more information, see Fargate platform versions in the Amazon Elastic Container Service Developer Guide. - propagateTags
-
- Type: string
Specifies whether to propagate the tags from the task definition to the task. If no value is specified, the tags aren't propagated. Tags can only be propagated to the task during task creation. To add tags to a task after task creation, use the TagResource API action.
You must set this to a value other than
NONE
when you use Cost Explorer. For more information, see Amazon ECS usage reports in the Amazon Elastic Container Service Developer Guide.The default is
NONE
. - role
-
- Type: string
The name or full Amazon Resource Name (ARN) of the IAM role that allows Amazon ECS to make calls to your load balancer on your behalf. This parameter is only permitted if you are using a load balancer with your service and your task definition doesn't use the
awsvpc
network mode. If you specify therole
parameter, you must also specify a load balancer object with theloadBalancers
parameter.If your account has already created the Amazon ECS service-linked role, that role is used for your service unless you specify a role here. The service-linked role is required if your task definition uses the
awsvpc
network mode or if the service is configured to use service discovery, an external deployment controller, multiple target groups, or Elastic Inference accelerators in which case you don't specify a role here. For more information, see Using service-linked roles for Amazon ECS in the Amazon Elastic Container Service Developer Guide.If your specified role has a path other than
/
, then you must either specify the full role ARN (this is recommended) or prefix the role name with the path. For example, if a role with the namebar
has a path of/foo/
then you would specify/foo/bar
as the role name. For more information, see Friendly names and paths in the IAM User Guide. - schedulingStrategy
-
- Type: string
The scheduling strategy to use for the service. For more information, see Services.
There are two service scheduler strategies available:
-
REPLICA
-The replica scheduling strategy places and maintains the desired number of tasks across your cluster. By default, the service scheduler spreads tasks across Availability Zones. You can use task placement strategies and constraints to customize task placement decisions. This scheduler strategy is required if the service uses theCODE_DEPLOY
orEXTERNAL
deployment controller types. -
DAEMON
-The daemon scheduling strategy deploys exactly one task on each active container instance that meets all of the task placement constraints that you specify in your cluster. The service scheduler also evaluates the task placement constraints for running tasks and will stop tasks that don't meet the placement constraints. When you're using this strategy, you don't need to specify a desired number of tasks, a task placement strategy, or use Service Auto Scaling policies.Tasks using the Fargate launch type or the
CODE_DEPLOY
orEXTERNAL
deployment controller types don't support theDAEMON
scheduling strategy.
- serviceConnectConfiguration
-
- Type: ServiceConnectConfiguration structure
The configuration for this service to discover and connect to services, and be discovered by, and connected from, other services within a namespace.
Tasks that run in a namespace can use short names to connect to services in the namespace. Tasks can connect to services across all of the clusters in the namespace. Tasks connect through a managed proxy container that collects logs and metrics for increased visibility. Only the tasks that Amazon ECS services create are supported with Service Connect. For more information, see Service Connect in the Amazon Elastic Container Service Developer Guide.
- serviceName
-
- Required: Yes
- Type: string
The name of your service. Up to 255 letters (uppercase and lowercase), numbers, underscores, and hyphens are allowed. Service names must be unique within a cluster, but you can have similarly named services in multiple clusters within a Region or across multiple Regions.
- serviceRegistries
-
- Type: Array of ServiceRegistry structures
The details of the service discovery registry to associate with this service. For more information, see Service discovery.
Each service may be associated with one service registry. Multiple service registries for each service isn't supported.
- tags
-
- Type: Array of Tag structures
The metadata that you apply to the service to help you categorize and organize them. Each tag consists of a key and an optional value, both of which you define. When a service is deleted, the tags are deleted as well.
The following basic restrictions apply to tags:
-
Maximum number of tags per resource - 50
-
For each resource, each tag key must be unique, and each tag key can have only one value.
-
Maximum key length - 128 Unicode characters in UTF-8
-
Maximum value length - 256 Unicode characters in UTF-8
-
If your tagging schema is used across multiple services and resources, remember that other services may have restrictions on allowed characters. Generally allowed characters are: letters, numbers, and spaces representable in UTF-8, and the following characters: + - = . _ : / @.
-
Tag keys and values are case-sensitive.
-
Do not use
aws:
,AWS:
, or any upper or lowercase combination of such as a prefix for either keys or values as it is reserved for Amazon Web Services use. You cannot edit or delete tag keys or values with this prefix. Tags with this prefix do not count against your tags per resource limit.
- taskDefinition
-
- Type: string
The
family
andrevision
(family:revision
) or full ARN of the task definition to run in your service. If arevision
isn't specified, the latestACTIVE
revision is used.A task definition must be specified if the service uses either the
ECS
orCODE_DEPLOY
deployment controllers.For more information about deployment types, see Amazon ECS deployment types.
- volumeConfigurations
-
- Type: Array of ServiceVolumeConfiguration structures
The configuration for a volume specified in the task definition as a volume that is configured at launch time. Currently, the only supported volume type is an Amazon EBS volume.
Result Syntax
[ 'service' => [ 'capacityProviderStrategy' => [ [ 'base' => <integer>, 'capacityProvider' => '<string>', 'weight' => <integer>, ], // ... ], 'clusterArn' => '<string>', 'createdAt' => <DateTime>, 'createdBy' => '<string>', 'deploymentConfiguration' => [ 'alarms' => [ 'alarmNames' => ['<string>', ...], 'enable' => true || false, 'rollback' => true || false, ], 'deploymentCircuitBreaker' => [ 'enable' => true || false, 'rollback' => true || false, ], 'maximumPercent' => <integer>, 'minimumHealthyPercent' => <integer>, ], 'deploymentController' => [ 'type' => 'ECS|CODE_DEPLOY|EXTERNAL', ], 'deployments' => [ [ 'capacityProviderStrategy' => [ [ 'base' => <integer>, 'capacityProvider' => '<string>', 'weight' => <integer>, ], // ... ], 'createdAt' => <DateTime>, 'desiredCount' => <integer>, 'failedTasks' => <integer>, 'fargateEphemeralStorage' => [ 'kmsKeyId' => '<string>', ], 'id' => '<string>', 'launchType' => 'EC2|FARGATE|EXTERNAL', 'networkConfiguration' => [ 'awsvpcConfiguration' => [ 'assignPublicIp' => 'ENABLED|DISABLED', 'securityGroups' => ['<string>', ...], 'subnets' => ['<string>', ...], ], ], 'pendingCount' => <integer>, 'platformFamily' => '<string>', 'platformVersion' => '<string>', 'rolloutState' => 'COMPLETED|FAILED|IN_PROGRESS', 'rolloutStateReason' => '<string>', 'runningCount' => <integer>, 'serviceConnectConfiguration' => [ 'enabled' => true || false, 'logConfiguration' => [ 'logDriver' => 'json-file|syslog|journald|gelf|fluentd|awslogs|splunk|awsfirelens', 'options' => ['<string>', ...], 'secretOptions' => [ [ 'name' => '<string>', 'valueFrom' => '<string>', ], // ... ], ], 'namespace' => '<string>', 'services' => [ [ 'clientAliases' => [ [ 'dnsName' => '<string>', 'port' => <integer>, ], // ... ], 'discoveryName' => '<string>', 'ingressPortOverride' => <integer>, 'portName' => '<string>', 'timeout' => [ 'idleTimeoutSeconds' => <integer>, 'perRequestTimeoutSeconds' => <integer>, ], 'tls' => [ 'issuerCertificateAuthority' => [ 'awsPcaAuthorityArn' => '<string>', ], 'kmsKey' => '<string>', 'roleArn' => '<string>', ], ], // ... ], ], 'serviceConnectResources' => [ [ 'discoveryArn' => '<string>', 'discoveryName' => '<string>', ], // ... ], 'status' => '<string>', 'taskDefinition' => '<string>', 'updatedAt' => <DateTime>, 'volumeConfigurations' => [ [ 'managedEBSVolume' => [ 'encrypted' => true || false, 'filesystemType' => 'ext3|ext4|xfs|ntfs', 'iops' => <integer>, 'kmsKeyId' => '<string>', 'roleArn' => '<string>', 'sizeInGiB' => <integer>, 'snapshotId' => '<string>', 'tagSpecifications' => [ [ 'propagateTags' => 'TASK_DEFINITION|SERVICE|NONE', 'resourceType' => 'volume', 'tags' => [ [ 'key' => '<string>', 'value' => '<string>', ], // ... ], ], // ... ], 'throughput' => <integer>, 'volumeType' => '<string>', ], 'name' => '<string>', ], // ... ], ], // ... ], 'desiredCount' => <integer>, 'enableECSManagedTags' => true || false, 'enableExecuteCommand' => true || false, 'events' => [ [ 'createdAt' => <DateTime>, 'id' => '<string>', 'message' => '<string>', ], // ... ], 'healthCheckGracePeriodSeconds' => <integer>, 'launchType' => 'EC2|FARGATE|EXTERNAL', 'loadBalancers' => [ [ 'containerName' => '<string>', 'containerPort' => <integer>, 'loadBalancerName' => '<string>', 'targetGroupArn' => '<string>', ], // ... ], 'networkConfiguration' => [ 'awsvpcConfiguration' => [ 'assignPublicIp' => 'ENABLED|DISABLED', 'securityGroups' => ['<string>', ...], 'subnets' => ['<string>', ...], ], ], 'pendingCount' => <integer>, 'placementConstraints' => [ [ 'expression' => '<string>', 'type' => 'distinctInstance|memberOf', ], // ... ], 'placementStrategy' => [ [ 'field' => '<string>', 'type' => 'random|spread|binpack', ], // ... ], 'platformFamily' => '<string>', 'platformVersion' => '<string>', 'propagateTags' => 'TASK_DEFINITION|SERVICE|NONE', 'roleArn' => '<string>', 'runningCount' => <integer>, 'schedulingStrategy' => 'REPLICA|DAEMON', 'serviceArn' => '<string>', 'serviceName' => '<string>', 'serviceRegistries' => [ [ 'containerName' => '<string>', 'containerPort' => <integer>, 'port' => <integer>, 'registryArn' => '<string>', ], // ... ], 'status' => '<string>', 'tags' => [ [ 'key' => '<string>', 'value' => '<string>', ], // ... ], 'taskDefinition' => '<string>', 'taskSets' => [ [ 'capacityProviderStrategy' => [ [ 'base' => <integer>, 'capacityProvider' => '<string>', 'weight' => <integer>, ], // ... ], 'clusterArn' => '<string>', 'computedDesiredCount' => <integer>, 'createdAt' => <DateTime>, 'externalId' => '<string>', 'fargateEphemeralStorage' => [ 'kmsKeyId' => '<string>', ], 'id' => '<string>', 'launchType' => 'EC2|FARGATE|EXTERNAL', 'loadBalancers' => [ [ 'containerName' => '<string>', 'containerPort' => <integer>, 'loadBalancerName' => '<string>', 'targetGroupArn' => '<string>', ], // ... ], 'networkConfiguration' => [ 'awsvpcConfiguration' => [ 'assignPublicIp' => 'ENABLED|DISABLED', 'securityGroups' => ['<string>', ...], 'subnets' => ['<string>', ...], ], ], 'pendingCount' => <integer>, 'platformFamily' => '<string>', 'platformVersion' => '<string>', 'runningCount' => <integer>, 'scale' => [ 'unit' => 'PERCENT', 'value' => <float>, ], 'serviceArn' => '<string>', 'serviceRegistries' => [ [ 'containerName' => '<string>', 'containerPort' => <integer>, 'port' => <integer>, 'registryArn' => '<string>', ], // ... ], 'stabilityStatus' => 'STEADY_STATE|STABILIZING', 'stabilityStatusAt' => <DateTime>, 'startedBy' => '<string>', 'status' => '<string>', 'tags' => [ [ 'key' => '<string>', 'value' => '<string>', ], // ... ], 'taskDefinition' => '<string>', 'taskSetArn' => '<string>', 'updatedAt' => <DateTime>, ], // ... ], ], ]
Result Details
Members
- service
-
- Type: Service structure
The full description of your service following the create call.
A service will return either a
capacityProviderStrategy
orlaunchType
parameter, but not both, depending where one was specified when it was created.If a service is using the
ECS
deployment controller, thedeploymentController
andtaskSets
parameters will not be returned.if the service uses the
CODE_DEPLOY
deployment controller, thedeploymentController
,taskSets
anddeployments
parameters will be returned, however thedeployments
parameter will be an empty list.
Errors
- ServerException:
These errors are usually caused by a server issue.
- ClientException:
These errors are usually caused by a client action. This client action might be using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be specifying an identifier that isn't valid.
The following list includes additional causes for the error:
-
The
RunTask
could not be processed because you use managed scaling and there is a capacity error because the quota of tasks in thePROVISIONING
per cluster has been reached. For information about the service quotas, see Amazon ECS service quotas.
-
- InvalidParameterException:
The specified parameter isn't valid. Review the available parameters for the API request.
- ClusterNotFoundException:
The specified cluster wasn't found. You can view your available clusters with ListClusters. Amazon ECS clusters are Region specific.
- UnsupportedFeatureException:
The specified task isn't supported in this Region.
- PlatformUnknownException:
The specified platform version doesn't exist.
- PlatformTaskDefinitionIncompatibilityException:
The specified platform version doesn't satisfy the required capabilities of the task definition.
- AccessDeniedException:
You don't have authorization to perform the requested action.
- NamespaceNotFoundException:
The specified namespace wasn't found.
Examples
Example 1: To create a new service
This example creates a service in your default region called ``ecs-simple-service``. The service uses the ``hello_world`` task definition and it maintains 10 copies of that task.
$result = $client->createService([ 'desiredCount' => 10, 'serviceName' => 'ecs-simple-service', 'taskDefinition' => 'hello_world', ]);
Result syntax:
[ 'service' => [ 'clusterArn' => 'arn:aws:ecs:us-east-1:012345678910:cluster/default', 'createdAt' =>, 'deploymentConfiguration' => [ 'maximumPercent' => 200, 'minimumHealthyPercent' => 100, ], 'deployments' => [ [ 'createdAt' => , 'desiredCount' => 10, 'id' => 'ecs-svc/9223370564342348388', 'pendingCount' => 0, 'runningCount' => 0, 'status' => 'PRIMARY', 'taskDefinition' => 'arn:aws:ecs:us-east-1:012345678910:task-definition/hello_world:6', 'updatedAt' => , ], [ 'createdAt' => , 'desiredCount' => 0, 'id' => 'ecs-svc/9223370564343611322', 'pendingCount' => 0, 'runningCount' => 0, 'status' => 'ACTIVE', 'taskDefinition' => 'arn:aws:ecs:us-east-1:012345678910:task-definition/hello_world:6', 'updatedAt' => , ], ], 'desiredCount' => 10, 'events' => [ ], 'loadBalancers' => [ ], 'pendingCount' => 0, 'runningCount' => 0, 'serviceArn' => 'arn:aws:ecs:us-east-1:012345678910:service/default/ecs-simple-service', 'serviceName' => 'ecs-simple-service', 'status' => 'ACTIVE', 'taskDefinition' => 'arn:aws:ecs:us-east-1:012345678910:task-definition/default/hello_world:6', ], ]
Example 2: To create a new service behind a load balancer
This example creates a service in your default region called ``ecs-simple-service-elb``. The service uses the ``ecs-demo`` task definition and it maintains 10 copies of that task. You must reference an existing load balancer in the same region by its name.
$result = $client->createService([ 'desiredCount' => 10, 'loadBalancers' => [ [ 'containerName' => 'simple-app', 'containerPort' => 80, 'loadBalancerName' => 'EC2Contai-EcsElast-15DCDAURT3ZO2', ], ], 'role' => 'ecsServiceRole', 'serviceName' => 'ecs-simple-service-elb', 'taskDefinition' => 'console-sample-app-static', ]);
Result syntax:
[ 'service' => [ 'clusterArn' => 'arn:aws:ecs:us-east-1:012345678910:cluster/default', 'createdAt' =>, 'deploymentConfiguration' => [ 'maximumPercent' => 200, 'minimumHealthyPercent' => 100, ], 'deployments' => [ [ 'createdAt' => , 'desiredCount' => 10, 'id' => 'ecs-svc/9223370564343000923', 'pendingCount' => 0, 'runningCount' => 0, 'status' => 'PRIMARY', 'taskDefinition' => 'arn:aws:ecs:us-east-1:012345678910:task-definition/console-sample-app-static:6', 'updatedAt' => , ], ], 'desiredCount' => 10, 'events' => [ ], 'loadBalancers' => [ [ 'containerName' => 'simple-app', 'containerPort' => 80, 'loadBalancerName' => 'EC2Contai-EcsElast-15DCDAURT3ZO2', ], ], 'pendingCount' => 0, 'roleArn' => 'arn:aws:iam::012345678910:role/ecsServiceRole', 'runningCount' => 0, 'serviceArn' => 'arn:aws:ecs:us-east-1:012345678910:service/default/ecs-simple-service-elb', 'serviceName' => 'ecs-simple-service-elb', 'status' => 'ACTIVE', 'taskDefinition' => 'arn:aws:ecs:us-east-1:012345678910:task-definition/default/console-sample-app-static:6', ], ]
CreateTaskSet
$result = $client->createTaskSet
([/* ... */]); $promise = $client->createTaskSetAsync
([/* ... */]);
Create a task set in the specified cluster and service. This is used when a service uses the EXTERNAL
deployment controller type. For more information, see Amazon ECS deployment types in the Amazon Elastic Container Service Developer Guide.
On March 21, 2024, a change was made to resolve the task definition revision before authorization. When a task definition revision is not specified, authorization will occur using the latest revision of a task definition.
For information about the maximum number of task sets and other quotas, see Amazon ECS service quotas in the Amazon Elastic Container Service Developer Guide.
Parameter Syntax
$result = $client->createTaskSet([ 'capacityProviderStrategy' => [ [ 'base' => <integer>, 'capacityProvider' => '<string>', // REQUIRED 'weight' => <integer>, ], // ... ], 'clientToken' => '<string>', 'cluster' => '<string>', // REQUIRED 'externalId' => '<string>', 'launchType' => 'EC2|FARGATE|EXTERNAL', 'loadBalancers' => [ [ 'containerName' => '<string>', 'containerPort' => <integer>, 'loadBalancerName' => '<string>', 'targetGroupArn' => '<string>', ], // ... ], 'networkConfiguration' => [ 'awsvpcConfiguration' => [ 'assignPublicIp' => 'ENABLED|DISABLED', 'securityGroups' => ['<string>', ...], 'subnets' => ['<string>', ...], // REQUIRED ], ], 'platformVersion' => '<string>', 'scale' => [ 'unit' => 'PERCENT', 'value' => <float>, ], 'service' => '<string>', // REQUIRED 'serviceRegistries' => [ [ 'containerName' => '<string>', 'containerPort' => <integer>, 'port' => <integer>, 'registryArn' => '<string>', ], // ... ], 'tags' => [ [ 'key' => '<string>', 'value' => '<string>', ], // ... ], 'taskDefinition' => '<string>', // REQUIRED ]);
Parameter Details
Members
- capacityProviderStrategy
-
- Type: Array of CapacityProviderStrategyItem structures
The capacity provider strategy to use for the task set.
A capacity provider strategy consists of one or more capacity providers along with the
base
andweight
to assign to them. A capacity provider must be associated with the cluster to be used in a capacity provider strategy. The PutClusterCapacityProviders API is used to associate a capacity provider with a cluster. Only capacity providers with anACTIVE
orUPDATING
status can be used.If a
capacityProviderStrategy
is specified, thelaunchType
parameter must be omitted. If nocapacityProviderStrategy
orlaunchType
is specified, thedefaultCapacityProviderStrategy
for the cluster is used.If specifying a capacity provider that uses an Auto Scaling group, the capacity provider must already be created. New capacity providers can be created with the CreateCapacityProviderProviderAPI operation.
To use a Fargate capacity provider, specify either the
FARGATE
orFARGATE_SPOT
capacity providers. The Fargate capacity providers are available to all accounts and only need to be associated with a cluster to be used.The PutClusterCapacityProviders API operation is used to update the list of available capacity providers for a cluster after the cluster is created.
- clientToken
-
- Type: string
An identifier that you provide to ensure the idempotency of the request. It must be unique and is case sensitive. Up to 36 ASCII characters in the range of 33-126 (inclusive) are allowed.
- cluster
-
- Required: Yes
- Type: string
The short name or full Amazon Resource Name (ARN) of the cluster that hosts the service to create the task set in.
- externalId
-
- Type: string
An optional non-unique tag that identifies this task set in external systems. If the task set is associated with a service discovery registry, the tasks in this task set will have the
ECS_TASK_SET_EXTERNAL_ID
Cloud Map attribute set to the provided value. - launchType
-
- Type: string
The launch type that new tasks in the task set uses. For more information, see Amazon ECS launch types in the Amazon Elastic Container Service Developer Guide.
If a
launchType
is specified, thecapacityProviderStrategy
parameter must be omitted. - loadBalancers
-
- Type: Array of LoadBalancer structures
A load balancer object representing the load balancer to use with the task set. The supported load balancer types are either an Application Load Balancer or a Network Load Balancer.
- networkConfiguration
-
- Type: NetworkConfiguration structure
An object representing the network configuration for a task set.
- platformVersion
-
- Type: string
The platform version that the tasks in the task set uses. A platform version is specified only for tasks using the Fargate launch type. If one isn't specified, the
LATEST
platform version is used. - scale
-
- Type: Scale structure
A floating-point percentage of the desired number of tasks to place and keep running in the task set.
- service
-
- Required: Yes
- Type: string
The short name or full Amazon Resource Name (ARN) of the service to create the task set in.
- serviceRegistries
-
- Type: Array of ServiceRegistry structures
The details of the service discovery registries to assign to this task set. For more information, see Service discovery.
- tags
-
- Type: Array of Tag structures
The metadata that you apply to the task set to help you categorize and organize them. Each tag consists of a key and an optional value. You define both. When a service is deleted, the tags are deleted.
The following basic restrictions apply to tags:
-
Maximum number of tags per resource - 50
-
For each resource, each tag key must be unique, and each tag key can have only one value.
-
Maximum key length - 128 Unicode characters in UTF-8
-
Maximum value length - 256 Unicode characters in UTF-8
-
If your tagging schema is used across multiple services and resources, remember that other services may have restrictions on allowed characters. Generally allowed characters are: letters, numbers, and spaces representable in UTF-8, and the following characters: + - = . _ : / @.
-
Tag keys and values are case-sensitive.
-
Do not use
aws:
,AWS:
, or any upper or lowercase combination of such as a prefix for either keys or values as it is reserved for Amazon Web Services use. You cannot edit or delete tag keys or values with this prefix. Tags with this prefix do not count against your tags per resource limit.
- taskDefinition
-
- Required: Yes
- Type: string
The task definition for the tasks in the task set to use. If a revision isn't specified, the latest
ACTIVE
revision is used.
Result Syntax
[ 'taskSet' => [ 'capacityProviderStrategy' => [ [ 'base' => <integer>, 'capacityProvider' => '<string>', 'weight' => <integer>, ], // ... ], 'clusterArn' => '<string>', 'computedDesiredCount' => <integer>, 'createdAt' => <DateTime>, 'externalId' => '<string>', 'fargateEphemeralStorage' => [ 'kmsKeyId' => '<string>', ], 'id' => '<string>', 'launchType' => 'EC2|FARGATE|EXTERNAL', 'loadBalancers' => [ [ 'containerName' => '<string>', 'containerPort' => <integer>, 'loadBalancerName' => '<string>', 'targetGroupArn' => '<string>', ], // ... ], 'networkConfiguration' => [ 'awsvpcConfiguration' => [ 'assignPublicIp' => 'ENABLED|DISABLED', 'securityGroups' => ['<string>', ...], 'subnets' => ['<string>', ...], ], ], 'pendingCount' => <integer>, 'platformFamily' => '<string>', 'platformVersion' => '<string>', 'runningCount' => <integer>, 'scale' => [ 'unit' => 'PERCENT', 'value' => <float>, ], 'serviceArn' => '<string>', 'serviceRegistries' => [ [ 'containerName' => '<string>', 'containerPort' => <integer>, 'port' => <integer>, 'registryArn' => '<string>', ], // ... ], 'stabilityStatus' => 'STEADY_STATE|STABILIZING', 'stabilityStatusAt' => <DateTime>, 'startedBy' => '<string>', 'status' => '<string>', 'tags' => [ [ 'key' => '<string>', 'value' => '<string>', ], // ... ], 'taskDefinition' => '<string>', 'taskSetArn' => '<string>', 'updatedAt' => <DateTime>, ], ]
Result Details
Members
- taskSet
-
- Type: TaskSet structure
Information about a set of Amazon ECS tasks in either an CodeDeploy or an
EXTERNAL
deployment. A task set includes details such as the desired number of tasks, how many tasks are running, and whether the task set serves production traffic.
Errors
- ServerException:
These errors are usually caused by a server issue.
- ClientException:
These errors are usually caused by a client action. This client action might be using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be specifying an identifier that isn't valid.
The following list includes additional causes for the error:
-
The
RunTask
could not be processed because you use managed scaling and there is a capacity error because the quota of tasks in thePROVISIONING
per cluster has been reached. For information about the service quotas, see Amazon ECS service quotas.
-
- InvalidParameterException:
The specified parameter isn't valid. Review the available parameters for the API request.
- ClusterNotFoundException:
The specified cluster wasn't found. You can view your available clusters with ListClusters. Amazon ECS clusters are Region specific.
- UnsupportedFeatureException:
The specified task isn't supported in this Region.
- PlatformUnknownException:
The specified platform version doesn't exist.
- PlatformTaskDefinitionIncompatibilityException:
The specified platform version doesn't satisfy the required capabilities of the task definition.
- AccessDeniedException:
You don't have authorization to perform the requested action.
- ServiceNotFoundException:
The specified service wasn't found. You can view your available services with ListServices. Amazon ECS services are cluster specific and Region specific.
- ServiceNotActiveException:
The specified service isn't active. You can't update a service that's inactive. If you have previously deleted a service, you can re-create it with CreateService.
- NamespaceNotFoundException:
The specified namespace wasn't found.
DeleteAccountSetting
$result = $client->deleteAccountSetting
([/* ... */]); $promise = $client->deleteAccountSettingAsync
([/* ... */]);
Disables an account setting for a specified user, role, or the root user for an account.
Parameter Syntax
$result = $client->deleteAccountSetting([ 'name' => 'serviceLongArnFormat|taskLongArnFormat|containerInstanceLongArnFormat|awsvpcTrunking|containerInsights|fargateFIPSMode|tagResourceAuthorization|fargateTaskRetirementWaitPeriod|guardDutyActivate', // REQUIRED 'principalArn' => '<string>', ]);
Parameter Details
Members
- name
-
- Required: Yes
- Type: string
The resource name to disable the account setting for. If
serviceLongArnFormat
is specified, the ARN for your Amazon ECS services is affected. IftaskLongArnFormat
is specified, the ARN and resource ID for your Amazon ECS tasks is affected. IfcontainerInstanceLongArnFormat
is specified, the ARN and resource ID for your Amazon ECS container instances is affected. IfawsvpcTrunking
is specified, the ENI limit for your Amazon ECS container instances is affected. - principalArn
-
- Type: string
The Amazon Resource Name (ARN) of the principal. It can be an user, role, or the root user. If you specify the root user, it disables the account setting for all users, roles, and the root user of the account unless a user or role explicitly overrides these settings. If this field is omitted, the setting is changed only for the authenticated user.
Result Syntax
[ 'setting' => [ 'name' => 'serviceLongArnFormat|taskLongArnFormat|containerInstanceLongArnFormat|awsvpcTrunking|containerInsights|fargateFIPSMode|tagResourceAuthorization|fargateTaskRetirementWaitPeriod|guardDutyActivate', 'principalArn' => '<string>', 'type' => 'user|aws_managed', 'value' => '<string>', ], ]
Result Details
Members
- setting
-
- Type: Setting structure
The account setting for the specified principal ARN.
Errors
- ServerException:
These errors are usually caused by a server issue.
- ClientException:
These errors are usually caused by a client action. This client action might be using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be specifying an identifier that isn't valid.
The following list includes additional causes for the error:
-
The
RunTask
could not be processed because you use managed scaling and there is a capacity error because the quota of tasks in thePROVISIONING
per cluster has been reached. For information about the service quotas, see Amazon ECS service quotas.
-
- InvalidParameterException:
The specified parameter isn't valid. Review the available parameters for the API request.
Examples
Example 1: To delete your account setting
This example deletes the account setting for your user for the specified resource type.
$result = $client->deleteAccountSetting([ 'name' => 'serviceLongArnFormat', ]);
Result syntax:
[ 'setting' => [ 'name' => 'serviceLongArnFormat', 'value' => 'enabled', 'principalArn' => 'arn:aws:iam:::user/principalName', ], ]
Example 2: To delete the account settings for a specific IAM user or IAM role
This example deletes the account setting for a specific IAM user or IAM role for the specified resource type. Only the root user can view or modify the account settings for another user.
$result = $client->deleteAccountSetting([ 'name' => 'containerInstanceLongArnFormat', 'principalArn' => 'arn:aws:iam:::user/principalName', ]);
Result syntax:
[ 'setting' => [ 'name' => 'containerInstanceLongArnFormat', 'value' => 'enabled', 'principalArn' => 'arn:aws:iam:::user/principalName', ], ]
DeleteAttributes
$result = $client->deleteAttributes
([/* ... */]); $promise = $client->deleteAttributesAsync
([/* ... */]);
Deletes one or more custom attributes from an Amazon ECS resource.
Parameter Syntax
$result = $client->deleteAttributes([ 'attributes' => [ // REQUIRED [ 'name' => '<string>', // REQUIRED 'targetId' => '<string>', 'targetType' => 'container-instance', 'value' => '<string>', ], // ... ], 'cluster' => '<string>', ]);
Parameter Details
Members
- attributes
-
- Required: Yes
- Type: Array of Attribute structures
The attributes to delete from your resource. You can specify up to 10 attributes for each request. For custom attributes, specify the attribute name and target ID, but don't specify the value. If you specify the target ID using the short form, you must also specify the target type.
- cluster
-
- Type: string
The short name or full Amazon Resource Name (ARN) of the cluster that contains the resource to delete attributes. If you do not specify a cluster, the default cluster is assumed.
Result Syntax
[ 'attributes' => [ [ 'name' => '<string>', 'targetId' => '<string>', 'targetType' => 'container-instance', 'value' => '<string>', ], // ... ], ]
Result Details
Members
- attributes
-
- Type: Array of Attribute structures
A list of attribute objects that were successfully deleted from your resource.
Errors
- ClusterNotFoundException:
The specified cluster wasn't found. You can view your available clusters with ListClusters. Amazon ECS clusters are Region specific.
- TargetNotFoundException:
The specified target wasn't found. You can view your available container instances with ListContainerInstances. Amazon ECS container instances are cluster-specific and Region-specific.
- InvalidParameterException:
The specified parameter isn't valid. Review the available parameters for the API request.
DeleteCapacityProvider
$result = $client->deleteCapacityProvider
([/* ... */]); $promise = $client->deleteCapacityProviderAsync
([/* ... */]);
Deletes the specified capacity provider.
The FARGATE
and FARGATE_SPOT
capacity providers are reserved and can't be deleted. You can disassociate them from a cluster using either PutCapacityProviderProviders or by deleting the cluster.
Prior to a capacity provider being deleted, the capacity provider must be removed from the capacity provider strategy from all services. The UpdateService API can be used to remove a capacity provider from a service's capacity provider strategy. When updating a service, the forceNewDeployment
option can be used to ensure that any tasks using the Amazon EC2 instance capacity provided by the capacity provider are transitioned to use the capacity from the remaining capacity providers. Only capacity providers that aren't associated with a cluster can be deleted. To remove a capacity provider from a cluster, you can either use PutCapacityProviderProviders or delete the cluster.
Parameter Syntax
$result = $client->deleteCapacityProvider([ 'capacityProvider' => '<string>', // REQUIRED ]);
Parameter Details
Members
- capacityProvider
-
- Required: Yes
- Type: string
The short name or full Amazon Resource Name (ARN) of the capacity provider to delete.
Result Syntax
[ 'capacityProvider' => [ 'autoScalingGroupProvider' => [ 'autoScalingGroupArn' => '<string>', 'managedDraining' => 'ENABLED|DISABLED', 'managedScaling' => [ 'instanceWarmupPeriod' => <integer>, 'maximumScalingStepSize' => <integer>, 'minimumScalingStepSize' => <integer>, 'status' => 'ENABLED|DISABLED', 'targetCapacity' => <integer>, ], 'managedTerminationProtection' => 'ENABLED|DISABLED', ], 'capacityProviderArn' => '<string>', 'name' => '<string>', 'status' => 'ACTIVE|INACTIVE', 'tags' => [ [ 'key' => '<string>', 'value' => '<string>', ], // ... ], 'updateStatus' => 'DELETE_IN_PROGRESS|DELETE_COMPLETE|DELETE_FAILED|UPDATE_IN_PROGRESS|UPDATE_COMPLETE|UPDATE_FAILED', 'updateStatusReason' => '<string>', ], ]
Result Details
Members
- capacityProvider
-
- Type: CapacityProvider structure
The details of the capacity provider.
Errors
- ServerException:
These errors are usually caused by a server issue.
- ClientException:
These errors are usually caused by a client action. This client action might be using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be specifying an identifier that isn't valid.
The following list includes additional causes for the error:
-
The
RunTask
could not be processed because you use managed scaling and there is a capacity error because the quota of tasks in thePROVISIONING
per cluster has been reached. For information about the service quotas, see Amazon ECS service quotas.
-
- InvalidParameterException:
The specified parameter isn't valid. Review the available parameters for the API request.
DeleteCluster
$result = $client->deleteCluster
([/* ... */]); $promise = $client->deleteClusterAsync
([/* ... */]);
Deletes the specified cluster. The cluster transitions to the INACTIVE
state. Clusters with an INACTIVE
status might remain discoverable in your account for a period of time. However, this behavior is subject to change in the future. We don't recommend that you rely on INACTIVE
clusters persisting.
You must deregister all container instances from this cluster before you may delete it. You can list the container instances in a cluster with ListContainerInstances and deregister them with DeregisterContainerInstance.
Parameter Syntax
$result = $client->deleteCluster([ 'cluster' => '<string>', // REQUIRED ]);
Parameter Details
Members
- cluster
-
- Required: Yes
- Type: string
The short name or full Amazon Resource Name (ARN) of the cluster to delete.
Result Syntax
[ 'cluster' => [ 'activeServicesCount' => <integer>, 'attachments' => [ [ 'details' => [ [ 'name' => '<string>', 'value' => '<string>', ], // ... ], 'id' => '<string>', 'status' => '<string>', 'type' => '<string>', ], // ... ], 'attachmentsStatus' => '<string>', 'capacityProviders' => ['<string>', ...], 'clusterArn' => '<string>', 'clusterName' => '<string>', 'configuration' => [ 'executeCommandConfiguration' => [ 'kmsKeyId' => '<string>', 'logConfiguration' => [ 'cloudWatchEncryptionEnabled' => true || false, 'cloudWatchLogGroupName' => '<string>', 's3BucketName' => '<string>', 's3EncryptionEnabled' => true || false, 's3KeyPrefix' => '<string>', ], 'logging' => 'NONE|DEFAULT|OVERRIDE', ], 'managedStorageConfiguration' => [ 'fargateEphemeralStorageKmsKeyId' => '<string>', 'kmsKeyId' => '<string>', ], ], 'defaultCapacityProviderStrategy' => [ [ 'base' => <integer>, 'capacityProvider' => '<string>', 'weight' => <integer>, ], // ... ], 'pendingTasksCount' => <integer>, 'registeredContainerInstancesCount' => <integer>, 'runningTasksCount' => <integer>, 'serviceConnectDefaults' => [ 'namespace' => '<string>', ], 'settings' => [ [ 'name' => 'containerInsights', 'value' => '<string>', ], // ... ], 'statistics' => [ [ 'name' => '<string>', 'value' => '<string>', ], // ... ], 'status' => '<string>', 'tags' => [ [ 'key' => '<string>', 'value' => '<string>', ], // ... ], ], ]
Result Details
Members
- cluster
-
- Type: Cluster structure
The full description of the deleted cluster.
Errors
- ServerException:
These errors are usually caused by a server issue.
- ClientException:
These errors are usually caused by a client action. This client action might be using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be specifying an identifier that isn't valid.
The following list includes additional causes for the error:
-
The
RunTask
could not be processed because you use managed scaling and there is a capacity error because the quota of tasks in thePROVISIONING
per cluster has been reached. For information about the service quotas, see Amazon ECS service quotas.
-
- InvalidParameterException:
The specified parameter isn't valid. Review the available parameters for the API request.
- ClusterNotFoundException:
The specified cluster wasn't found. You can view your available clusters with ListClusters. Amazon ECS clusters are Region specific.
- ClusterContainsContainerInstancesException:
You can't delete a cluster that has registered container instances. First, deregister the container instances before you can delete the cluster. For more information, see DeregisterContainerInstance.
- ClusterContainsServicesException:
You can't delete a cluster that contains services. First, update the service to reduce its desired task count to 0, and then delete the service. For more information, see UpdateService and DeleteService.
- ClusterContainsTasksException:
You can't delete a cluster that has active tasks.
- UpdateInProgressException:
There's already a current Amazon ECS container agent update in progress on the container instance that's specified. If the container agent becomes disconnected while it's in a transitional stage, such as
PENDING
orSTAGING
, the update process can get stuck in that state. However, when the agent reconnects, it resumes where it stopped previously.
Examples
Example 1: To delete an empty cluster
This example deletes an empty cluster in your default region.
$result = $client->deleteCluster([ 'cluster' => 'my_cluster', ]);
Result syntax:
[ 'cluster' => [ 'activeServicesCount' => 0, 'clusterArn' => 'arn:aws:ecs:us-east-1:012345678910:cluster/my_cluster', 'clusterName' => 'my_cluster', 'pendingTasksCount' => 0, 'registeredContainerInstancesCount' => 0, 'runningTasksCount' => 0, 'status' => 'INACTIVE', ], ]
DeleteService
$result = $client->deleteService
([/* ... */]); $promise = $client->deleteServiceAsync
([/* ... */]);
Deletes a specified service within a cluster. You can delete a service if you have no running tasks in it and the desired task count is zero. If the service is actively maintaining tasks, you can't delete it, and you must update the service to a desired task count of zero. For more information, see UpdateService.
When you delete a service, if there are still running tasks that require cleanup, the service status moves from ACTIVE
to DRAINING
, and the service is no longer visible in the console or in the ListServices API operation. After all tasks have transitioned to either STOPPING
or STOPPED
status, the service status moves from DRAINING
to INACTIVE
. Services in the DRAINING
or INACTIVE
status can still be viewed with the DescribeServices API operation. However, in the future, INACTIVE
services may be cleaned up and purged from Amazon ECS record keeping, and DescribeServices calls on those services return a ServiceNotFoundException
error.
If you attempt to create a new service with the same name as an existing service in either ACTIVE
or DRAINING
status, you receive an error.
Parameter Syntax
$result = $client->deleteService([ 'cluster' => '<string>', 'force' => true || false, 'service' => '<string>', // REQUIRED ]);
Parameter Details
Members
- cluster
-
- Type: string
The short name or full Amazon Resource Name (ARN) of the cluster that hosts the service to delete. If you do not specify a cluster, the default cluster is assumed.
- force
-
- Type: boolean
If
true
, allows you to delete a service even if it wasn't scaled down to zero tasks. It's only necessary to use this if the service uses theREPLICA
scheduling strategy. - service
-
- Required: Yes
- Type: string
The name of the service to delete.
Result Syntax
[ 'service' => [ 'capacityProviderStrategy' => [ [ 'base' => <integer>, 'capacityProvider' => '<string>', 'weight' => <integer>, ], // ... ], 'clusterArn' => '<string>', 'createdAt' => <DateTime>, 'createdBy' => '<string>', 'deploymentConfiguration' => [ 'alarms' => [ 'alarmNames' => ['<string>', ...], 'enable' => true || false, 'rollback' => true || false, ], 'deploymentCircuitBreaker' => [ 'enable' => true || false, 'rollback' => true || false, ], 'maximumPercent' => <integer>, 'minimumHealthyPercent' => <integer>, ], 'deploymentController' => [ 'type' => 'ECS|CODE_DEPLOY|EXTERNAL', ], 'deployments' => [ [ 'capacityProviderStrategy' => [ [ 'base' => <integer>, 'capacityProvider' => '<string>', 'weight' => <integer>, ], // ... ], 'createdAt' => <DateTime>, 'desiredCount' => <integer>, 'failedTasks' => <integer>, 'fargateEphemeralStorage' => [ 'kmsKeyId' => '<string>', ], 'id' => '<string>', 'launchType' => 'EC2|FARGATE|EXTERNAL', 'networkConfiguration' => [ 'awsvpcConfiguration' => [ 'assignPublicIp' => 'ENABLED|DISABLED', 'securityGroups' => ['<string>', ...], 'subnets' => ['<string>', ...], ], ], 'pendingCount' => <integer>, 'platformFamily' => '<string>', 'platformVersion' => '<string>', 'rolloutState' => 'COMPLETED|FAILED|IN_PROGRESS', 'rolloutStateReason' => '<string>', 'runningCount' => <integer>, 'serviceConnectConfiguration' => [ 'enabled' => true || false, 'logConfiguration' => [ 'logDriver' => 'json-file|syslog|journald|gelf|fluentd|awslogs|splunk|awsfirelens', 'options' => ['<string>', ...], 'secretOptions' => [ [ 'name' => '<string>', 'valueFrom' => '<string>', ], // ... ], ], 'namespace' => '<string>', 'services' => [ [ 'clientAliases' => [ [ 'dnsName' => '<string>', 'port' => <integer>, ], // ... ], 'discoveryName' => '<string>', 'ingressPortOverride' => <integer>, 'portName' => '<string>', 'timeout' => [ 'idleTimeoutSeconds' => <integer>, 'perRequestTimeoutSeconds' => <integer>, ], 'tls' => [ 'issuerCertificateAuthority' => [ 'awsPcaAuthorityArn' => '<string>', ], 'kmsKey' => '<string>', 'roleArn' => '<string>', ], ], // ... ], ], 'serviceConnectResources' => [ [ 'discoveryArn' => '<string>', 'discoveryName' => '<string>', ], // ... ], 'status' => '<string>', 'taskDefinition' => '<string>', 'updatedAt' => <DateTime>, 'volumeConfigurations' => [ [ 'managedEBSVolume' => [ 'encrypted' => true || false, 'filesystemType' => 'ext3|ext4|xfs|ntfs', 'iops' => <integer>, 'kmsKeyId' => '<string>', 'roleArn' => '<string>', 'sizeInGiB' => <integer>, 'snapshotId' => '<string>', 'tagSpecifications' => [ [ 'propagateTags' => 'TASK_DEFINITION|SERVICE|NONE', 'resourceType' => 'volume', 'tags' => [ [ 'key' => '<string>', 'value' => '<string>', ], // ... ], ], // ... ], 'throughput' => <integer>, 'volumeType' => '<string>', ], 'name' => '<string>', ], // ... ], ], // ... ], 'desiredCount' => <integer>, 'enableECSManagedTags' => true || false, 'enableExecuteCommand' => true || false, 'events' => [ [ 'createdAt' => <DateTime>, 'id' => '<string>', 'message' => '<string>', ], // ... ], 'healthCheckGracePeriodSeconds' => <integer>, 'launchType' => 'EC2|FARGATE|EXTERNAL', 'loadBalancers' => [ [ 'containerName' => '<string>', 'containerPort' => <integer>, 'loadBalancerName' => '<string>', 'targetGroupArn' => '<string>', ], // ... ], 'networkConfiguration' => [ 'awsvpcConfiguration' => [ 'assignPublicIp' => 'ENABLED|DISABLED', 'securityGroups' => ['<string>', ...], 'subnets' => ['<string>', ...], ], ], 'pendingCount' => <integer>, 'placementConstraints' => [ [ 'expression' => '<string>', 'type' => 'distinctInstance|memberOf', ], // ... ], 'placementStrategy' => [ [ 'field' => '<string>', 'type' => 'random|spread|binpack', ], // ... ], 'platformFamily' => '<string>', 'platformVersion' => '<string>', 'propagateTags' => 'TASK_DEFINITION|SERVICE|NONE', 'roleArn' => '<string>', 'runningCount' => <integer>, 'schedulingStrategy' => 'REPLICA|DAEMON', 'serviceArn' => '<string>', 'serviceName' => '<string>', 'serviceRegistries' => [ [ 'containerName' => '<string>', 'containerPort' => <integer>, 'port' => <integer>, 'registryArn' => '<string>', ], // ... ], 'status' => '<string>', 'tags' => [ [ 'key' => '<string>', 'value' => '<string>', ], // ... ], 'taskDefinition' => '<string>', 'taskSets' => [ [ 'capacityProviderStrategy' => [ [ 'base' => <integer>, 'capacityProvider' => '<string>', 'weight' => <integer>, ], // ... ], 'clusterArn' => '<string>', 'computedDesiredCount' => <integer>, 'createdAt' => <DateTime>, 'externalId' => '<string>', 'fargateEphemeralStorage' => [ 'kmsKeyId' => '<string>', ], 'id' => '<string>', 'launchType' => 'EC2|FARGATE|EXTERNAL', 'loadBalancers' => [ [ 'containerName' => '<string>', 'containerPort' => <integer>, 'loadBalancerName' => '<string>', 'targetGroupArn' => '<string>', ], // ... ], 'networkConfiguration' => [ 'awsvpcConfiguration' => [ 'assignPublicIp' => 'ENABLED|DISABLED', 'securityGroups' => ['<string>', ...], 'subnets' => ['<string>', ...], ], ], 'pendingCount' => <integer>, 'platformFamily' => '<string>', 'platformVersion' => '<string>', 'runningCount' => <integer>, 'scale' => [ 'unit' => 'PERCENT', 'value' => <float>, ], 'serviceArn' => '<string>', 'serviceRegistries' => [ [ 'containerName' => '<string>', 'containerPort' => <integer>, 'port' => <integer>, 'registryArn' => '<string>', ], // ... ], 'stabilityStatus' => 'STEADY_STATE|STABILIZING', 'stabilityStatusAt' => <DateTime>, 'startedBy' => '<string>', 'status' => '<string>', 'tags' => [ [ 'key' => '<string>', 'value' => '<string>', ], // ... ], 'taskDefinition' => '<string>', 'taskSetArn' => '<string>', 'updatedAt' => <DateTime>, ], // ... ], ], ]
Result Details
Members
- service
-
- Type: Service structure
The full description of the deleted service.
Errors
- ServerException:
These errors are usually caused by a server issue.
- ClientException:
These errors are usually caused by a client action. This client action might be using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be specifying an identifier that isn't valid.
The following list includes additional causes for the error:
-
The
RunTask
could not be processed because you use managed scaling and there is a capacity error because the quota of tasks in thePROVISIONING
per cluster has been reached. For information about the service quotas, see Amazon ECS service quotas.
-
- InvalidParameterException:
The specified parameter isn't valid. Review the available parameters for the API request.
- ClusterNotFoundException:
The specified cluster wasn't found. You can view your available clusters with ListClusters. Amazon ECS clusters are Region specific.
- ServiceNotFoundException:
The specified service wasn't found. You can view your available services with ListServices. Amazon ECS services are cluster specific and Region specific.
Examples
Example 1: To delete a service
This example deletes the my-http-service service. The service must have a desired count and running count of 0 before you can delete it.
$result = $client->deleteService([ 'service' => 'my-http-service', ]);
Result syntax:
[ ]
DeleteTaskDefinitions
$result = $client->deleteTaskDefinitions
([/* ... */]); $promise = $client->deleteTaskDefinitionsAsync
([/* ... */]);
Deletes one or more task definitions.
You must deregister a task definition revision before you delete it. For more information, see DeregisterTaskDefinition.
When you delete a task definition revision, it is immediately transitions from the INACTIVE
to DELETE_IN_PROGRESS
. Existing tasks and services that reference a DELETE_IN_PROGRESS
task definition revision continue to run without disruption. Existing services that reference a DELETE_IN_PROGRESS
task definition revision can still scale up or down by modifying the service's desired count.
You can't use a DELETE_IN_PROGRESS
task definition revision to run new tasks or create new services. You also can't update an existing service to reference a DELETE_IN_PROGRESS
task definition revision.
A task definition revision will stay in DELETE_IN_PROGRESS
status until all the associated tasks and services have been terminated.
When you delete all INACTIVE
task definition revisions, the task definition name is not displayed in the console and not returned in the API. If a task definition revisions are in the DELETE_IN_PROGRESS
state, the task definition name is displayed in the console and returned in the API. The task definition name is retained by Amazon ECS and the revision is incremented the next time you create a task definition with that name.
Parameter Syntax
$result = $client->deleteTaskDefinitions([ 'taskDefinitions' => ['<string>', ...], // REQUIRED ]);
Parameter Details
Members
- taskDefinitions
-
- Required: Yes
- Type: Array of strings
The
family
andrevision
(family:revision
) or full Amazon Resource Name (ARN) of the task definition to delete. You must specify arevision
.You can specify up to 10 task definitions as a comma separated list.
Result Syntax
[ 'failures' => [ [ 'arn' => '<string>', 'detail' => '<string>', 'reason' => '<string>', ], // ... ], 'taskDefinitions' => [ [ 'compatibilities' => ['<string>', ...], 'containerDefinitions' => [ [ 'command' => ['<string>', ...], 'cpu' => <integer>, 'credentialSpecs' => ['<string>', ...], 'dependsOn' => [ [ 'condition' => 'START|COMPLETE|SUCCESS|HEALTHY', 'containerName' => '<string>', ], // ... ], 'disableNetworking' => true || false, 'dnsSearchDomains' => ['<string>', ...], 'dnsServers' => ['<string>', ...], 'dockerLabels' => ['<string>', ...], 'dockerSecurityOptions' => ['<string>', ...], 'entryPoint' => ['<string>', ...], 'environment' => [ [ 'name' => '<string>', 'value' => '<string>', ], // ... ], 'environmentFiles' => [ [ 'type' => 's3', 'value' => '<string>', ], // ... ], 'essential' => true || false, 'extraHosts' => [ [ 'hostname' => '<string>', 'ipAddress' => '<string>', ], // ... ], 'firelensConfiguration' => [ 'options' => ['<string>', ...], 'type' => 'fluentd|fluentbit', ], 'healthCheck' => [ 'command' => ['<string>', ...], 'interval' => <integer>, 'retries' => <integer>, 'startPeriod' => <integer>, 'timeout' => <integer>, ], 'hostname' => '<string>', 'image' => '<string>', 'interactive' => true || false, 'links' => ['<string>', ...], 'linuxParameters' => [ 'capabilities' => [ 'add' => ['<string>', ...], 'drop' => ['<string>', ...], ], 'devices' => [ [ 'containerPath' => '<string>', 'hostPath' => '<string>', 'permissions' => ['<string>', ...], ], // ... ], 'initProcessEnabled' => true || false, 'maxSwap' => <integer>, 'sharedMemorySize' => <integer>, 'swappiness' => <integer>, 'tmpfs' => [ [ 'containerPath' => '<string>', 'mountOptions' => ['<string>', ...], 'size' => <integer>, ], // ... ], ], 'logConfiguration' => [ 'logDriver' => 'json-file|syslog|journald|gelf|fluentd|awslogs|splunk|awsfirelens', 'options' => ['<string>', ...], 'secretOptions' => [ [ 'name' => '<string>', 'valueFrom' => '<string>', ], // ... ], ], 'memory' => <integer>, 'memoryReservation' => <integer>, 'mountPoints' => [ [ 'containerPath' => '<string>', 'readOnly' => true || false, 'sourceVolume' => '<string>', ], // ... ], 'name' => '<string>', 'portMappings' => [ [ 'appProtocol' => 'http|http2|grpc', 'containerPort' => <integer>, 'containerPortRange' => '<string>', 'hostPort' => <integer>, 'name' => '<string>', 'protocol' => 'tcp|udp', ], // ... ], 'privileged' => true || false, 'pseudoTerminal' => true || false, 'readonlyRootFilesystem' => true || false, 'repositoryCredentials' => [ 'credentialsParameter' => '<string>', ], 'resourceRequirements' => [ [ 'type' => 'GPU|InferenceAccelerator', 'value' => '<string>', ], // ... ], 'restartPolicy' => [ 'enabled' => true || false, 'ignoredExitCodes' => [<integer>, ...], 'restartAttemptPeriod' => <integer>, ], 'secrets' => [ [ 'name' => '<string>', 'valueFrom' => '<string>', ], // ... ], 'startTimeout' => <integer>, 'stopTimeout' => <integer>, 'systemControls' => [ [ 'namespace' => '<string>', 'value' => '<string>', ], // ... ], 'ulimits' => [ [ 'hardLimit' => <integer>, 'name' => 'core|cpu|data|fsize|locks|memlock|msgqueue|nice|nofile|nproc|rss|rtprio|rttime|sigpending|stack', 'softLimit' => <integer>, ], // ... ], 'user' => '<string>', 'volumesFrom' => [ [ 'readOnly' => true || false, 'sourceContainer' => '<string>', ], // ... ], 'workingDirectory' => '<string>', ], // ... ], 'cpu' => '<string>', 'deregisteredAt' => <DateTime>, 'ephemeralStorage' => [ 'sizeInGiB' => <integer>, ], 'executionRoleArn' => '<string>', 'family' => '<string>', 'inferenceAccelerators' => [ [ 'deviceName' => '<string>', 'deviceType' => '<string>', ], // ... ], 'ipcMode' => 'host|task|none', 'memory' => '<string>', 'networkMode' => 'bridge|host|awsvpc|none', 'pidMode' => 'host|task', 'placementConstraints' => [ [ 'expression' => '<string>', 'type' => 'memberOf', ], // ... ], 'proxyConfiguration' => [ 'containerName' => '<string>', 'properties' => [ [ 'name' => '<string>', 'value' => '<string>', ], // ... ], 'type' => 'APPMESH', ], 'registeredAt' => <DateTime>, 'registeredBy' => '<string>', 'requiresAttributes' => [ [ 'name' => '<string>', 'targetId' => '<string>', 'targetType' => 'container-instance', 'value' => '<string>', ], // ... ], 'requiresCompatibilities' => ['<string>', ...], 'revision' => <integer>, 'runtimePlatform' => [ 'cpuArchitecture' => 'X86_64|ARM64', 'operatingSystemFamily' => 'WINDOWS_SERVER_2019_FULL|WINDOWS_SERVER_2019_CORE|WINDOWS_SERVER_2016_FULL|WINDOWS_SERVER_2004_CORE|WINDOWS_SERVER_2022_CORE|WINDOWS_SERVER_2022_FULL|WINDOWS_SERVER_20H2_CORE|LINUX', ], 'status' => 'ACTIVE|INACTIVE|DELETE_IN_PROGRESS', 'taskDefinitionArn' => '<string>', 'taskRoleArn' => '<string>', 'volumes' => [ [ 'configuredAtLaunch' => true || false, 'dockerVolumeConfiguration' => [ 'autoprovision' => true || false, 'driver' => '<string>', 'driverOpts' => ['<string>', ...], 'labels' => ['<string>', ...], 'scope' => 'task|shared', ], 'efsVolumeConfiguration' => [ 'authorizationConfig' => [ 'accessPointId' => '<string>', 'iam' => 'ENABLED|DISABLED', ], 'fileSystemId' => '<string>', 'rootDirectory' => '<string>', 'transitEncryption' => 'ENABLED|DISABLED', 'transitEncryptionPort' => <integer>, ], 'fsxWindowsFileServerVolumeConfiguration' => [ 'authorizationConfig' => [ 'credentialsParameter' => '<string>', 'domain' => '<string>', ], 'fileSystemId' => '<string>', 'rootDirectory' => '<string>', ], 'host' => [ 'sourcePath' => '<string>', ], 'name' => '<string>', ], // ... ], ], // ... ], ]
Result Details
Members
- failures
-
- Type: Array of Failure structures
Any failures associated with the call.
- taskDefinitions
-
- Type: Array of TaskDefinition structures
The list of deleted task definitions.
Errors
- AccessDeniedException:
You don't have authorization to perform the requested action.
- ClientException:
These errors are usually caused by a client action. This client action might be using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be specifying an identifier that isn't valid.
The following list includes additional causes for the error:
-
The
RunTask
could not be processed because you use managed scaling and there is a capacity error because the quota of tasks in thePROVISIONING
per cluster has been reached. For information about the service quotas, see Amazon ECS service quotas.
-
- InvalidParameterException:
The specified parameter isn't valid. Review the available parameters for the API request.
- ServerException:
These errors are usually caused by a server issue.
DeleteTaskSet
$result = $client->deleteTaskSet
([/* ... */]); $promise = $client->deleteTaskSetAsync
([/* ... */]);
Deletes a specified task set within a service. This is used when a service uses the EXTERNAL
deployment controller type. For more information, see Amazon ECS deployment types in the Amazon Elastic Container Service Developer Guide.
Parameter Syntax
$result = $client->deleteTaskSet([ 'cluster' => '<string>', // REQUIRED 'force' => true || false, 'service' => '<string>', // REQUIRED 'taskSet' => '<string>', // REQUIRED ]);
Parameter Details
Members
- cluster
-
- Required: Yes
- Type: string
The short name or full Amazon Resource Name (ARN) of the cluster that hosts the service that the task set found in to delete.
- force
-
- Type: boolean
If
true
, you can delete a task set even if it hasn't been scaled down to zero. - service
-
- Required: Yes
- Type: string
The short name or full Amazon Resource Name (ARN) of the service that hosts the task set to delete.
- taskSet
-
- Required: Yes
- Type: string
The task set ID or full Amazon Resource Name (ARN) of the task set to delete.
Result Syntax
[ 'taskSet' => [ 'capacityProviderStrategy' => [ [ 'base' => <integer>, 'capacityProvider' => '<string>', 'weight' => <integer>, ], // ... ], 'clusterArn' => '<string>', 'computedDesiredCount' => <integer>, 'createdAt' => <DateTime>, 'externalId' => '<string>', 'fargateEphemeralStorage' => [ 'kmsKeyId' => '<string>', ], 'id' => '<string>', 'launchType' => 'EC2|FARGATE|EXTERNAL', 'loadBalancers' => [ [ 'containerName' => '<string>', 'containerPort' => <integer>, 'loadBalancerName' => '<string>', 'targetGroupArn' => '<string>', ], // ... ], 'networkConfiguration' => [ 'awsvpcConfiguration' => [ 'assignPublicIp' => 'ENABLED|DISABLED', 'securityGroups' => ['<string>', ...], 'subnets' => ['<string>', ...], ], ], 'pendingCount' => <integer>, 'platformFamily' => '<string>', 'platformVersion' => '<string>', 'runningCount' => <integer>, 'scale' => [ 'unit' => 'PERCENT', 'value' => <float>, ], 'serviceArn' => '<string>', 'serviceRegistries' => [ [ 'containerName' => '<string>', 'containerPort' => <integer>, 'port' => <integer>, 'registryArn' => '<string>', ], // ... ], 'stabilityStatus' => 'STEADY_STATE|STABILIZING', 'stabilityStatusAt' => <DateTime>, 'startedBy' => '<string>', 'status' => '<string>', 'tags' => [ [ 'key' => '<string>', 'value' => '<string>', ], // ... ], 'taskDefinition' => '<string>', 'taskSetArn' => '<string>', 'updatedAt' => <DateTime>, ], ]
Result Details
Members
- taskSet
-
- Type: TaskSet structure
Details about the task set.
Errors
- ServerException:
These errors are usually caused by a server issue.
- ClientException:
These errors are usually caused by a client action. This client action might be using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be specifying an identifier that isn't valid.
The following list includes additional causes for the error:
-
The
RunTask
could not be processed because you use managed scaling and there is a capacity error because the quota of tasks in thePROVISIONING
per cluster has been reached. For information about the service quotas, see Amazon ECS service quotas.
-
- InvalidParameterException:
The specified parameter isn't valid. Review the available parameters for the API request.
- ClusterNotFoundException:
The specified cluster wasn't found. You can view your available clusters with ListClusters. Amazon ECS clusters are Region specific.
- UnsupportedFeatureException:
The specified task isn't supported in this Region.
- AccessDeniedException:
You don't have authorization to perform the requested action.
- ServiceNotFoundException:
The specified service wasn't found. You can view your available services with ListServices. Amazon ECS services are cluster specific and Region specific.
- ServiceNotActiveException:
The specified service isn't active. You can't update a service that's inactive. If you have previously deleted a service, you can re-create it with CreateService.
- TaskSetNotFoundException:
The specified task set wasn't found. You can view your available task sets with DescribeTaskSets. Task sets are specific to each cluster, service and Region.
DeregisterContainerInstance
$result = $client->deregisterContainerInstance
([/* ... */]); $promise = $client->deregisterContainerInstanceAsync
([/* ... */]);
Deregisters an Amazon ECS container instance from the specified cluster. This instance is no longer available to run tasks.
If you intend to use the container instance for some other purpose after deregistration, we recommend that you stop all of the tasks running on the container instance before deregistration. That prevents any orphaned tasks from consuming resources.
Deregistering a container instance removes the instance from a cluster, but it doesn't terminate the EC2 instance. If you are finished using the instance, be sure to terminate it in the Amazon EC2 console to stop billing.
If you terminate a running container instance, Amazon ECS automatically deregisters the instance from your cluster (stopped container instances or instances with disconnected agents aren't automatically deregistered when terminated).
Parameter Syntax
$result = $client->deregisterContainerInstance([ 'cluster' => '<string>', 'containerInstance' => '<string>', // REQUIRED 'force' => true || false, ]);
Parameter Details
Members
- cluster
-
- Type: string
The short name or full Amazon Resource Name (ARN) of the cluster that hosts the container instance to deregister. If you do not specify a cluster, the default cluster is assumed.
- containerInstance
-
- Required: Yes
- Type: string
The container instance ID or full ARN of the container instance to deregister. For more information about the ARN format, see Amazon Resource Name (ARN) in the Amazon ECS Developer Guide.
- force
-
- Type: boolean
Forces the container instance to be deregistered. If you have tasks running on the container instance when you deregister it with the
force
option, these tasks remain running until you terminate the instance or the tasks stop through some other means, but they're orphaned (no longer monitored or accounted for by Amazon ECS). If an orphaned task on your container instance is part of an Amazon ECS service, then the service scheduler starts another copy of that task, on a different container instance if possible.Any containers in orphaned service tasks that are registered with a Classic Load Balancer or an Application Load Balancer target group are deregistered. They begin connection draining according to the settings on the load balancer or target group.
Result Syntax
[ 'containerInstance' => [ 'agentConnected' => true || false, 'agentUpdateStatus' => 'PENDING|STAGING|STAGED|UPDATING|UPDATED|FAILED', 'attachments' => [ [ 'details' => [ [ 'name' => '<string>', 'value' => '<string>', ], // ... ], 'id' => '<string>', 'status' => '<string>', 'type' => '<string>', ], // ... ], 'attributes' => [ [ 'name' => '<string>', 'targetId' => '<string>', 'targetType' => 'container-instance', 'value' => '<string>', ], // ... ], 'capacityProviderName' => '<string>', 'containerInstanceArn' => '<string>', 'ec2InstanceId' => '<string>', 'healthStatus' => [ 'details' => [ [ 'lastStatusChange' => <DateTime>, 'lastUpdated' => <DateTime>, 'status' => 'OK|IMPAIRED|INSUFFICIENT_DATA|INITIALIZING', 'type' => 'CONTAINER_RUNTIME', ], // ... ], 'overallStatus' => 'OK|IMPAIRED|INSUFFICIENT_DATA|INITIALIZING', ], 'pendingTasksCount' => <integer>, 'registeredAt' => <DateTime>, 'registeredResources' => [ [ 'doubleValue' => <float>, 'integerValue' => <integer>, 'longValue' => <integer>, 'name' => '<string>', 'stringSetValue' => ['<string>', ...], 'type' => '<string>', ], // ... ], 'remainingResources' => [ [ 'doubleValue' => <float>, 'integerValue' => <integer>, 'longValue' => <integer>, 'name' => '<string>', 'stringSetValue' => ['<string>', ...], 'type' => '<string>', ], // ... ], 'runningTasksCount' => <integer>, 'status' => '<string>', 'statusReason' => '<string>', 'tags' => [ [ 'key' => '<string>', 'value' => '<string>', ], // ... ], 'version' => <integer>, 'versionInfo' => [ 'agentHash' => '<string>', 'agentVersion' => '<string>', 'dockerVersion' => '<string>', ], ], ]
Result Details
Members
- containerInstance
-
- Type: ContainerInstance structure
The container instance that was deregistered.
Errors
- ServerException:
These errors are usually caused by a server issue.
- ClientException:
These errors are usually caused by a client action. This client action might be using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be specifying an identifier that isn't valid.
The following list includes additional causes for the error:
-
The
RunTask
could not be processed because you use managed scaling and there is a capacity error because the quota of tasks in thePROVISIONING
per cluster has been reached. For information about the service quotas, see Amazon ECS service quotas.
-
- InvalidParameterException:
The specified parameter isn't valid. Review the available parameters for the API request.
- ClusterNotFoundException:
The specified cluster wasn't found. You can view your available clusters with ListClusters. Amazon ECS clusters are Region specific.
Examples
Example 1: To deregister a container instance from a cluster
This example deregisters a container instance from the specified cluster in your default region. If there are still tasks running on the container instance, you must either stop those tasks before deregistering, or use the force option.
$result = $client->deregisterContainerInstance([ 'cluster' => 'default', 'containerInstance' => 'container_instance_UUID', 'force' => 1, ]);
Result syntax:
[ ]
DeregisterTaskDefinition
$result = $client->deregisterTaskDefinition
([/* ... */]); $promise = $client->deregisterTaskDefinitionAsync
([/* ... */]);
Deregisters the specified task definition by family and revision. Upon deregistration, the task definition is marked as INACTIVE
. Existing tasks and services that reference an INACTIVE
task definition continue to run without disruption. Existing services that reference an INACTIVE
task definition can still scale up or down by modifying the service's desired count. If you want to delete a task definition revision, you must first deregister the task definition revision.
You can't use an INACTIVE
task definition to run new tasks or create new services, and you can't update an existing service to reference an INACTIVE
task definition. However, there may be up to a 10-minute window following deregistration where these restrictions have not yet taken effect.
At this time, INACTIVE
task definitions remain discoverable in your account indefinitely. However, this behavior is subject to change in the future. We don't recommend that you rely on INACTIVE
task definitions persisting beyond the lifecycle of any associated tasks and services.
You must deregister a task definition revision before you delete it. For more information, see DeleteTaskDefinitions.
Parameter Syntax
$result = $client->deregisterTaskDefinition([ 'taskDefinition' => '<string>', // REQUIRED ]);
Parameter Details
Members
- taskDefinition
-
- Required: Yes
- Type: string
The
family
andrevision
(family:revision
) or full Amazon Resource Name (ARN) of the task definition to deregister. You must specify arevision
.
Result Syntax
[ 'taskDefinition' => [ 'compatibilities' => ['<string>', ...], 'containerDefinitions' => [ [ 'command' => ['<string>', ...], 'cpu' => <integer>, 'credentialSpecs' => ['<string>', ...], 'dependsOn' => [ [ 'condition' => 'START|COMPLETE|SUCCESS|HEALTHY', 'containerName' => '<string>', ], // ... ], 'disableNetworking' => true || false, 'dnsSearchDomains' => ['<string>', ...], 'dnsServers' => ['<string>', ...], 'dockerLabels' => ['<string>', ...], 'dockerSecurityOptions' => ['<string>', ...], 'entryPoint' => ['<string>', ...], 'environment' => [ [ 'name' => '<string>', 'value' => '<string>', ], // ... ], 'environmentFiles' => [ [ 'type' => 's3', 'value' => '<string>', ], // ... ], 'essential' => true || false, 'extraHosts' => [ [ 'hostname' => '<string>', 'ipAddress' => '<string>', ], // ... ], 'firelensConfiguration' => [ 'options' => ['<string>', ...], 'type' => 'fluentd|fluentbit', ], 'healthCheck' => [ 'command' => ['<string>', ...], 'interval' => <integer>, 'retries' => <integer>, 'startPeriod' => <integer>, 'timeout' => <integer>, ], 'hostname' => '<string>', 'image' => '<string>', 'interactive' => true || false, 'links' => ['<string>', ...], 'linuxParameters' => [ 'capabilities' => [ 'add' => ['<string>', ...], 'drop' => ['<string>', ...], ], 'devices' => [ [ 'containerPath' => '<string>', 'hostPath' => '<string>', 'permissions' => ['<string>', ...], ], // ... ], 'initProcessEnabled' => true || false, 'maxSwap' => <integer>, 'sharedMemorySize' => <integer>, 'swappiness' => <integer>, 'tmpfs' => [ [ 'containerPath' => '<string>', 'mountOptions' => ['<string>', ...], 'size' => <integer>, ], // ... ], ], 'logConfiguration' => [ 'logDriver' => 'json-file|syslog|journald|gelf|fluentd|awslogs|splunk|awsfirelens', 'options' => ['<string>', ...], 'secretOptions' => [ [ 'name' => '<string>', 'valueFrom' => '<string>', ], // ... ], ], 'memory' => <integer>, 'memoryReservation' => <integer>, 'mountPoints' => [ [ 'containerPath' => '<string>', 'readOnly' => true || false, 'sourceVolume' => '<string>', ], // ... ], 'name' => '<string>', 'portMappings' => [ [ 'appProtocol' => 'http|http2|grpc', 'containerPort' => <integer>, 'containerPortRange' => '<string>', 'hostPort' => <integer>, 'name' => '<string>', 'protocol' => 'tcp|udp', ], // ... ], 'privileged' => true || false, 'pseudoTerminal' => true || false, 'readonlyRootFilesystem' => true || false, 'repositoryCredentials' => [ 'credentialsParameter' => '<string>', ], 'resourceRequirements' => [ [ 'type' => 'GPU|InferenceAccelerator', 'value' => '<string>', ], // ... ], 'restartPolicy' => [ 'enabled' => true || false, 'ignoredExitCodes' => [<integer>, ...], 'restartAttemptPeriod' => <integer>, ], 'secrets' => [ [ 'name' => '<string>', 'valueFrom' => '<string>', ], // ... ], 'startTimeout' => <integer>, 'stopTimeout' => <integer>, 'systemControls' => [ [ 'namespace' => '<string>', 'value' => '<string>', ], // ... ], 'ulimits' => [ [ 'hardLimit' => <integer>, 'name' => 'core|cpu|data|fsize|locks|memlock|msgqueue|nice|nofile|nproc|rss|rtprio|rttime|sigpending|stack', 'softLimit' => <integer>, ], // ... ], 'user' => '<string>', 'volumesFrom' => [ [ 'readOnly' => true || false, 'sourceContainer' => '<string>', ], // ... ], 'workingDirectory' => '<string>', ], // ... ], 'cpu' => '<string>', 'deregisteredAt' => <DateTime>, 'ephemeralStorage' => [ 'sizeInGiB' => <integer>, ], 'executionRoleArn' => '<string>', 'family' => '<string>', 'inferenceAccelerators' => [ [ 'deviceName' => '<string>', 'deviceType' => '<string>', ], // ... ], 'ipcMode' => 'host|task|none', 'memory' => '<string>', 'networkMode' => 'bridge|host|awsvpc|none', 'pidMode' => 'host|task', 'placementConstraints' => [ [ 'expression' => '<string>', 'type' => 'memberOf', ], // ... ], 'proxyConfiguration' => [ 'containerName' => '<string>', 'properties' => [ [ 'name' => '<string>', 'value' => '<string>', ], // ... ], 'type' => 'APPMESH', ], 'registeredAt' => <DateTime>, 'registeredBy' => '<string>', 'requiresAttributes' => [ [ 'name' => '<string>', 'targetId' => '<string>', 'targetType' => 'container-instance', 'value' => '<string>', ], // ... ], 'requiresCompatibilities' => ['<string>', ...], 'revision' => <integer>, 'runtimePlatform' => [ 'cpuArchitecture' => 'X86_64|ARM64', 'operatingSystemFamily' => 'WINDOWS_SERVER_2019_FULL|WINDOWS_SERVER_2019_CORE|WINDOWS_SERVER_2016_FULL|WINDOWS_SERVER_2004_CORE|WINDOWS_SERVER_2022_CORE|WINDOWS_SERVER_2022_FULL|WINDOWS_SERVER_20H2_CORE|LINUX', ], 'status' => 'ACTIVE|INACTIVE|DELETE_IN_PROGRESS', 'taskDefinitionArn' => '<string>', 'taskRoleArn' => '<string>', 'volumes' => [ [ 'configuredAtLaunch' => true || false, 'dockerVolumeConfiguration' => [ 'autoprovision' => true || false, 'driver' => '<string>', 'driverOpts' => ['<string>', ...], 'labels' => ['<string>', ...], 'scope' => 'task|shared', ], 'efsVolumeConfiguration' => [ 'authorizationConfig' => [ 'accessPointId' => '<string>', 'iam' => 'ENABLED|DISABLED', ], 'fileSystemId' => '<string>', 'rootDirectory' => '<string>', 'transitEncryption' => 'ENABLED|DISABLED', 'transitEncryptionPort' => <integer>, ], 'fsxWindowsFileServerVolumeConfiguration' => [ 'authorizationConfig' => [ 'credentialsParameter' => '<string>', 'domain' => '<string>', ], 'fileSystemId' => '<string>', 'rootDirectory' => '<string>', ], 'host' => [ 'sourcePath' => '<string>', ], 'name' => '<string>', ], // ... ], ], ]
Result Details
Members
- taskDefinition
-
- Type: TaskDefinition structure
The full description of the deregistered task.
Errors
- ServerException:
These errors are usually caused by a server issue.
- ClientException:
These errors are usually caused by a client action. This client action might be using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be specifying an identifier that isn't valid.
The following list includes additional causes for the error:
-
The
RunTask
could not be processed because you use managed scaling and there is a capacity error because the quota of tasks in thePROVISIONING
per cluster has been reached. For information about the service quotas, see Amazon ECS service quotas.
-
- InvalidParameterException:
The specified parameter isn't valid. Review the available parameters for the API request.
DescribeCapacityProviders
$result = $client->describeCapacityProviders
([/* ... */]); $promise = $client->describeCapacityProvidersAsync
([/* ... */]);
Describes one or more of your capacity providers.
Parameter Syntax
$result = $client->describeCapacityProviders([ 'capacityProviders' => ['<string>', ...], 'include' => ['<string>', ...], 'maxResults' => <integer>, 'nextToken' => '<string>', ]);
Parameter Details
Members
- capacityProviders
-
- Type: Array of strings
The short name or full Amazon Resource Name (ARN) of one or more capacity providers. Up to
100
capacity providers can be described in an action. - include
-
- Type: Array of strings
Specifies whether or not you want to see the resource tags for the capacity provider. If
TAGS
is specified, the tags are included in the response. If this field is omitted, tags aren't included in the response. - maxResults
-
- Type: int
The maximum number of account setting results returned by
DescribeCapacityProviders
in paginated output. When this parameter is used,DescribeCapacityProviders
only returnsmaxResults
results in a single page along with anextToken
response element. The remaining results of the initial request can be seen by sending anotherDescribeCapacityProviders
request with the returnednextToken
value. This value can be between 1 and 10. If this parameter is not used, thenDescribeCapacityProviders
returns up to 10 results and anextToken
value if applicable. - nextToken
-
- Type: string
The
nextToken
value returned from a previous paginatedDescribeCapacityProviders
request wheremaxResults
was used and the results exceeded the value of that parameter. Pagination continues from the end of the previous results that returned thenextToken
value.This token should be treated as an opaque identifier that is only used to retrieve the next items in a list and not for other programmatic purposes.
Result Syntax
[ 'capacityProviders' => [ [ 'autoScalingGroupProvider' => [ 'autoScalingGroupArn' => '<string>', 'managedDraining' => 'ENABLED|DISABLED', 'managedScaling' => [ 'instanceWarmupPeriod' => <integer>, 'maximumScalingStepSize' => <integer>, 'minimumScalingStepSize' => <integer>, 'status' => 'ENABLED|DISABLED', 'targetCapacity' => <integer>, ], 'managedTerminationProtection' => 'ENABLED|DISABLED', ], 'capacityProviderArn' => '<string>', 'name' => '<string>', 'status' => 'ACTIVE|INACTIVE', 'tags' => [ [ 'key' => '<string>', 'value' => '<string>', ], // ... ], 'updateStatus' => 'DELETE_IN_PROGRESS|DELETE_COMPLETE|DELETE_FAILED|UPDATE_IN_PROGRESS|UPDATE_COMPLETE|UPDATE_FAILED', 'updateStatusReason' => '<string>', ], // ... ], 'failures' => [ [ 'arn' => '<string>', 'detail' => '<string>', 'reason' => '<string>', ], // ... ], 'nextToken' => '<string>', ]
Result Details
Members
- capacityProviders
-
- Type: Array of CapacityProvider structures
The list of capacity providers.
- failures
-
- Type: Array of Failure structures
Any failures associated with the call.
- nextToken
-
- Type: string
The
nextToken
value to include in a futureDescribeCapacityProviders
request. When the results of aDescribeCapacityProviders
request exceedmaxResults
, this value can be used to retrieve the next page of results. This value isnull
when there are no more results to return.
Errors
- ServerException:
These errors are usually caused by a server issue.
- ClientException:
These errors are usually caused by a client action. This client action might be using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be specifying an identifier that isn't valid.
The following list includes additional causes for the error:
-
The
RunTask
could not be processed because you use managed scaling and there is a capacity error because the quota of tasks in thePROVISIONING
per cluster has been reached. For information about the service quotas, see Amazon ECS service quotas.
-
- InvalidParameterException:
The specified parameter isn't valid. Review the available parameters for the API request.
DescribeClusters
$result = $client->describeClusters
([/* ... */]); $promise = $client->describeClustersAsync
([/* ... */]);
Describes one or more of your clusters.
Parameter Syntax
$result = $client->describeClusters([ 'clusters' => ['<string>', ...], 'include' => ['<string>', ...], ]);
Parameter Details
Members
- clusters
-
- Type: Array of strings
A list of up to 100 cluster names or full cluster Amazon Resource Name (ARN) entries. If you do not specify a cluster, the default cluster is assumed.
- include
-
- Type: Array of strings
Determines whether to include additional information about the clusters in the response. If this field is omitted, this information isn't included.
If
ATTACHMENTS
is specified, the attachments for the container instances or tasks within the cluster are included, for example the capacity providers.If
SETTINGS
is specified, the settings for the cluster are included.If
CONFIGURATIONS
is specified, the configuration for the cluster is included.If
STATISTICS
is specified, the task and service count is included, separated by launch type.If
TAGS
is specified, the metadata tags associated with the cluster are included.
Result Syntax
[ 'clusters' => [ [ 'activeServicesCount' => <integer>, 'attachments' => [ [ 'details' => [ [ 'name' => '<string>', 'value' => '<string>', ], // ... ], 'id' => '<string>', 'status' => '<string>', 'type' => '<string>', ], // ... ], 'attachmentsStatus' => '<string>', 'capacityProviders' => ['<string>', ...], 'clusterArn' => '<string>', 'clusterName' => '<string>', 'configuration' => [ 'executeCommandConfiguration' => [ 'kmsKeyId' => '<string>', 'logConfiguration' => [ 'cloudWatchEncryptionEnabled' => true || false, 'cloudWatchLogGroupName' => '<string>', 's3BucketName' => '<string>', 's3EncryptionEnabled' => true || false, 's3KeyPrefix' => '<string>', ], 'logging' => 'NONE|DEFAULT|OVERRIDE', ], 'managedStorageConfiguration' => [ 'fargateEphemeralStorageKmsKeyId' => '<string>', 'kmsKeyId' => '<string>', ], ], 'defaultCapacityProviderStrategy' => [ [ 'base' => <integer>, 'capacityProvider' => '<string>', 'weight' => <integer>, ], // ... ], 'pendingTasksCount' => <integer>, 'registeredContainerInstancesCount' => <integer>, 'runningTasksCount' => <integer>, 'serviceConnectDefaults' => [ 'namespace' => '<string>', ], 'settings' => [ [ 'name' => 'containerInsights', 'value' => '<string>', ], // ... ], 'statistics' => [ [ 'name' => '<string>', 'value' => '<string>', ], // ... ], 'status' => '<string>', 'tags' => [ [ 'key' => '<string>', 'value' => '<string>', ], // ... ], ], // ... ], 'failures' => [ [ 'arn' => '<string>', 'detail' => '<string>', 'reason' => '<string>', ], // ... ], ]
Result Details
Members
Errors
- ServerException:
These errors are usually caused by a server issue.
- ClientException:
These errors are usually caused by a client action. This client action might be using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be specifying an identifier that isn't valid.
The following list includes additional causes for the error:
-
The
RunTask
could not be processed because you use managed scaling and there is a capacity error because the quota of tasks in thePROVISIONING
per cluster has been reached. For information about the service quotas, see Amazon ECS service quotas.
-
- InvalidParameterException:
The specified parameter isn't valid. Review the available parameters for the API request.
Examples
Example 1: To describe a cluster
This example provides a description of the specified cluster in your default region.
$result = $client->describeClusters([ 'clusters' => [ 'default', ], ]);
Result syntax:
[ 'clusters' => [ [ 'clusterArn' => 'arn:aws:ecs:us-east-1:aws_account_id:cluster/default', 'clusterName' => 'default', 'status' => 'ACTIVE', ], ], 'failures' => [ ], ]
DescribeContainerInstances
$result = $client->describeContainerInstances
([/* ... */]); $promise = $client->describeContainerInstancesAsync
([/* ... */]);
Describes one or more container instances. Returns metadata about each container instance requested.
Parameter Syntax
$result = $client->describeContainerInstances([ 'cluster' => '<string>', 'containerInstances' => ['<string>', ...], // REQUIRED 'include' => ['<string>', ...], ]);
Parameter Details
Members
- cluster
-
- Type: string
The short name or full Amazon Resource Name (ARN) of the cluster that hosts the container instances to describe. If you do not specify a cluster, the default cluster is assumed. This parameter is required if the container instance or container instances you are describing were launched in any cluster other than the default cluster.
- containerInstances
-
- Required: Yes
- Type: Array of strings
A list of up to 100 container instance IDs or full Amazon Resource Name (ARN) entries.
- include
-
- Type: Array of strings
Specifies whether you want to see the resource tags for the container instance. If
TAGS
is specified, the tags are included in the response. IfCONTAINER_INSTANCE_HEALTH
is specified, the container instance health is included in the response. If this field is omitted, tags and container instance health status aren't included in the response.
Result Syntax
[ 'containerInstances' => [ [ 'agentConnected' => true || false, 'agentUpdateStatus' => 'PENDING|STAGING|STAGED|UPDATING|UPDATED|FAILED', 'attachments' => [ [ 'details' => [ [ 'name' => '<string>', 'value' => '<string>', ], // ... ], 'id' => '<string>', 'status' => '<string>', 'type' => '<string>', ], // ... ], 'attributes' => [ [ 'name' => '<string>', 'targetId' => '<string>', 'targetType' => 'container-instance', 'value' => '<string>', ], // ... ], 'capacityProviderName' => '<string>', 'containerInstanceArn' => '<string>', 'ec2InstanceId' => '<string>', 'healthStatus' => [ 'details' => [ [ 'lastStatusChange' => <DateTime>, 'lastUpdated' => <DateTime>, 'status' => 'OK|IMPAIRED|INSUFFICIENT_DATA|INITIALIZING', 'type' => 'CONTAINER_RUNTIME', ], // ... ], 'overallStatus' => 'OK|IMPAIRED|INSUFFICIENT_DATA|INITIALIZING', ], 'pendingTasksCount' => <integer>, 'registeredAt' => <DateTime>, 'registeredResources' => [ [ 'doubleValue' => <float>, 'integerValue' => <integer>, 'longValue' => <integer>, 'name' => '<string>', 'stringSetValue' => ['<string>', ...], 'type' => '<string>', ], // ... ], 'remainingResources' => [ [ 'doubleValue' => <float>, 'integerValue' => <integer>, 'longValue' => <integer>, 'name' => '<string>', 'stringSetValue' => ['<string>', ...], 'type' => '<string>', ], // ... ], 'runningTasksCount' => <integer>, 'status' => '<string>', 'statusReason' => '<string>', 'tags' => [ [ 'key' => '<string>', 'value' => '<string>', ], // ... ], 'version' => <integer>, 'versionInfo' => [ 'agentHash' => '<string>', 'agentVersion' => '<string>', 'dockerVersion' => '<string>', ], ], // ... ], 'failures' => [ [ 'arn' => '<string>', 'detail' => '<string>', 'reason' => '<string>', ], // ... ], ]
Result Details
Members
- containerInstances
-
- Type: Array of ContainerInstance structures
The list of container instances.
- failures
-
- Type: Array of Failure structures
Any failures associated with the call.
Errors
- ServerException:
These errors are usually caused by a server issue.
- ClientException:
These errors are usually caused by a client action. This client action might be using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be specifying an identifier that isn't valid.
The following list includes additional causes for the error:
-
The
RunTask
could not be processed because you use managed scaling and there is a capacity error because the quota of tasks in thePROVISIONING
per cluster has been reached. For information about the service quotas, see Amazon ECS service quotas.
-
- InvalidParameterException:
The specified parameter isn't valid. Review the available parameters for the API request.
- ClusterNotFoundException:
The specified cluster wasn't found. You can view your available clusters with ListClusters. Amazon ECS clusters are Region specific.
Examples
Example 1: To describe container instance
This example provides a description of the specified container instance in your default region, using the container instance UUID as an identifier.
$result = $client->describeContainerInstances([ 'cluster' => 'default', 'containerInstances' => [ 'f2756532-8f13-4d53-87c9-aed50dc94cd7', ], ]);
Result syntax:
[ 'containerInstances' => [ [ 'agentConnected' => 1, 'containerInstanceArn' => 'arn:aws:ecs:us-east-1:012345678910:container-instance/default/f2756532-8f13-4d53-87c9-aed50dc94cd7', 'ec2InstanceId' => 'i-807f3249', 'pendingTasksCount' => 0, 'registeredResources' => [ [ 'name' => 'CPU', 'type' => 'INTEGER', 'doubleValue' => 0, 'integerValue' => 2048, 'longValue' => 0, ], [ 'name' => 'MEMORY', 'type' => 'INTEGER', 'doubleValue' => 0, 'integerValue' => 3768, 'longValue' => 0, ], [ 'name' => 'PORTS', 'type' => 'STRINGSET', 'doubleValue' => 0, 'integerValue' => 0, 'longValue' => 0, 'stringSetValue' => [ '2376', '22', '51678', '2375', ], ], ], 'remainingResources' => [ [ 'name' => 'CPU', 'type' => 'INTEGER', 'doubleValue' => 0, 'integerValue' => 1948, 'longValue' => 0, ], [ 'name' => 'MEMORY', 'type' => 'INTEGER', 'doubleValue' => 0, 'integerValue' => 3668, 'longValue' => 0, ], [ 'name' => 'PORTS', 'type' => 'STRINGSET', 'doubleValue' => 0, 'integerValue' => 0, 'longValue' => 0, 'stringSetValue' => [ '2376', '22', '80', '51678', '2375', ], ], ], 'runningTasksCount' => 1, 'status' => 'ACTIVE', ], ], 'failures' => [ ], ]
DescribeServiceDeployments
$result = $client->describeServiceDeployments
([/* ... */]); $promise = $client->describeServiceDeploymentsAsync
([/* ... */]);
Describes one or more of your service deployments.
A service deployment happens when you release a software update for the service. For more information, see Amazon ECS service deployments.
Parameter Syntax
$result = $client->describeServiceDeployments([ 'serviceDeploymentArns' => ['<string>', ...], // REQUIRED ]);
Parameter Details
Members
- serviceDeploymentArns
-
- Required: Yes
- Type: Array of strings
The ARN of the service deployment.
You can specify a maximum of 20 ARNs.
Result Syntax
[ 'failures' => [ [ 'arn' => '<string>', 'detail' => '<string>', 'reason' => '<string>', ], // ... ], 'serviceDeployments' => [ [ 'alarms' => [ 'alarmNames' => ['<string>', ...], 'status' => 'TRIGGERED|MONITORING|MONITORING_COMPLETE|DISABLED', 'triggeredAlarmNames' => ['<string>', ...], ], 'clusterArn' => '<string>', 'createdAt' => <DateTime>, 'deploymentCircuitBreaker' => [ 'failureCount' => <integer>, 'status' => 'TRIGGERED|MONITORING|MONITORING_COMPLETE|DISABLED', 'threshold' => <integer>, ], 'deploymentConfiguration' => [ 'alarms' => [ 'alarmNames' => ['<string>', ...], 'enable' => true || false, 'rollback' => true || false, ], 'deploymentCircuitBreaker' => [ 'enable' => true || false, 'rollback' => true || false, ], 'maximumPercent' => <integer>, 'minimumHealthyPercent' => <integer>, ], 'finishedAt' => <DateTime>, 'rollback' => [ 'reason' => '<string>', 'serviceRevisionArn' => '<string>', 'startedAt' => <DateTime>, ], 'serviceArn' => '<string>', 'serviceDeploymentArn' => '<string>', 'sourceServiceRevisions' => [ [ 'arn' => '<string>', 'pendingTaskCount' => <integer>, 'requestedTaskCount' => <integer>, 'runningTaskCount' => <integer>, ], // ... ], 'startedAt' => <DateTime>, 'status' => 'PENDING|SUCCESSFUL|STOPPED|STOP_REQUESTED|IN_PROGRESS|ROLLBACK_IN_PROGRESS|ROLLBACK_SUCCESSFUL|ROLLBACK_FAILED', 'statusReason' => '<string>', 'stoppedAt' => <DateTime>, 'targetServiceRevision' => [ 'arn' => '<string>', 'pendingTaskCount' => <integer>, 'requestedTaskCount' => <integer>, 'runningTaskCount' => <integer>, ], 'updatedAt' => <DateTime>, ], // ... ], ]
Result Details
Members
- failures
-
- Type: Array of Failure structures
Any failures associated with the call.
If you decsribe a deployment with a service revision created before October 25, 2024, the call fails. The failure includes the service revision ARN and the reason set to
MISSING
. - serviceDeployments
-
- Type: Array of ServiceDeployment structures
The list of service deployments described.
Errors
- AccessDeniedException:
You don't have authorization to perform the requested action.
- ClientException:
These errors are usually caused by a client action. This client action might be using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be specifying an identifier that isn't valid.
The following list includes additional causes for the error:
-
The
RunTask
could not be processed because you use managed scaling and there is a capacity error because the quota of tasks in thePROVISIONING
per cluster has been reached. For information about the service quotas, see Amazon ECS service quotas.
-
- ClusterNotFoundException:
The specified cluster wasn't found. You can view your available clusters with ListClusters. Amazon ECS clusters are Region specific.
- InvalidParameterException:
The specified parameter isn't valid. Review the available parameters for the API request.
- ServerException:
These errors are usually caused by a server issue.
- ServiceNotFoundException:
The specified service wasn't found. You can view your available services with ListServices. Amazon ECS services are cluster specific and Region specific.
- UnsupportedFeatureException:
The specified task isn't supported in this Region.
DescribeServiceRevisions
$result = $client->describeServiceRevisions
([/* ... */]); $promise = $client->describeServiceRevisionsAsync
([/* ... */]);
Describes one or more service revisions.
A service revision is a version of the service that includes the values for the Amazon ECS resources (for example, task definition) and the environment resources (for example, load balancers, subnets, and security groups). For more information, see Amazon ECS service revisions.
You can't describe a service revision that was created before October 25, 2024.
Parameter Syntax
$result = $client->describeServiceRevisions([ 'serviceRevisionArns' => ['<string>', ...], // REQUIRED ]);
Parameter Details
Members
- serviceRevisionArns
-
- Required: Yes
- Type: Array of strings
The ARN of the service revision.
You can specify a maximum of 20 ARNs.
You can call ListServiceDeployments to get the ARNs.
Result Syntax
[ 'failures' => [ [ 'arn' => '<string>', 'detail' => '<string>', 'reason' => '<string>', ], // ... ], 'serviceRevisions' => [ [ 'capacityProviderStrategy' => [ [ 'base' => <integer>, 'capacityProvider' => '<string>', 'weight' => <integer>, ], // ... ], 'clusterArn' => '<string>', 'containerImages' => [ [ 'containerName' => '<string>', 'image' => '<string>', 'imageDigest' => '<string>', ], // ... ], 'createdAt' => <DateTime>, 'fargateEphemeralStorage' => [ 'kmsKeyId' => '<string>', ], 'guardDutyEnabled' => true || false, 'launchType' => 'EC2|FARGATE|EXTERNAL', 'loadBalancers' => [ [ 'containerName' => '<string>', 'containerPort' => <integer>, 'loadBalancerName' => '<string>', 'targetGroupArn' => '<string>', ], // ... ], 'networkConfiguration' => [ 'awsvpcConfiguration' => [ 'assignPublicIp' => 'ENABLED|DISABLED', 'securityGroups' => ['<string>', ...], 'subnets' => ['<string>', ...], ], ], 'platformFamily' => '<string>', 'platformVersion' => '<string>', 'serviceArn' => '<string>', 'serviceConnectConfiguration' => [ 'enabled' => true || false, 'logConfiguration' => [ 'logDriver' => 'json-file|syslog|journald|gelf|fluentd|awslogs|splunk|awsfirelens', 'options' => ['<string>', ...], 'secretOptions' => [ [ 'name' => '<string>', 'valueFrom' => '<string>', ], // ... ], ], 'namespace' => '<string>', 'services' => [ [ 'clientAliases' => [ [ 'dnsName' => '<string>', 'port' => <integer>, ], // ... ], 'discoveryName' => '<string>', 'ingressPortOverride' => <integer>, 'portName' => '<string>', 'timeout' => [ 'idleTimeoutSeconds' => <integer>, 'perRequestTimeoutSeconds' => <integer>, ], 'tls' => [ 'issuerCertificateAuthority' => [ 'awsPcaAuthorityArn' => '<string>', ], 'kmsKey' => '<string>', 'roleArn' => '<string>', ], ], // ... ], ], 'serviceRegistries' => [ [ 'containerName' => '<string>', 'containerPort' => <integer>, 'port' => <integer>, 'registryArn' => '<string>', ], // ... ], 'serviceRevisionArn' => '<string>', 'taskDefinition' => '<string>', 'volumeConfigurations' => [ [ 'managedEBSVolume' => [ 'encrypted' => true || false, 'filesystemType' => 'ext3|ext4|xfs|ntfs', 'iops' => <integer>, 'kmsKeyId' => '<string>', 'roleArn' => '<string>', 'sizeInGiB' => <integer>, 'snapshotId' => '<string>', 'tagSpecifications' => [ [ 'propagateTags' => 'TASK_DEFINITION|SERVICE|NONE', 'resourceType' => 'volume', 'tags' => [ [ 'key' => '<string>', 'value' => '<string>', ], // ... ], ], // ... ], 'throughput' => <integer>, 'volumeType' => '<string>', ], 'name' => '<string>', ], // ... ], ], // ... ], ]
Result Details
Members
- failures
-
- Type: Array of Failure structures
Any failures associated with the call.
- serviceRevisions
-
- Type: Array of ServiceRevision structures
The list of service revisions described.
Errors
- AccessDeniedException:
You don't have authorization to perform the requested action.
- ClientException:
These errors are usually caused by a client action. This client action might be using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be specifying an identifier that isn't valid.
The following list includes additional causes for the error:
-
The
RunTask
could not be processed because you use managed scaling and there is a capacity error because the quota of tasks in thePROVISIONING
per cluster has been reached. For information about the service quotas, see Amazon ECS service quotas.
-
- ClusterNotFoundException:
The specified cluster wasn't found. You can view your available clusters with ListClusters. Amazon ECS clusters are Region specific.
- InvalidParameterException:
The specified parameter isn't valid. Review the available parameters for the API request.
- ServerException:
These errors are usually caused by a server issue.
- ServiceNotFoundException:
The specified service wasn't found. You can view your available services with ListServices. Amazon ECS services are cluster specific and Region specific.
- UnsupportedFeatureException:
The specified task isn't supported in this Region.
DescribeServices
$result = $client->describeServices
([/* ... */]); $promise = $client->describeServicesAsync
([/* ... */]);
Describes the specified services running in your cluster.
Parameter Syntax
$result = $client->describeServices([ 'cluster' => '<string>', 'include' => ['<string>', ...], 'services' => ['<string>', ...], // REQUIRED ]);
Parameter Details
Members
- cluster
-
- Type: string
The short name or full Amazon Resource Name (ARN)the cluster that hosts the service to describe. If you do not specify a cluster, the default cluster is assumed. This parameter is required if the service or services you are describing were launched in any cluster other than the default cluster.
- include
-
- Type: Array of strings
Determines whether you want to see the resource tags for the service. If
TAGS
is specified, the tags are included in the response. If this field is omitted, tags aren't included in the response. - services
-
- Required: Yes
- Type: Array of strings
A list of services to describe. You may specify up to 10 services to describe in a single operation.
Result Syntax
[ 'failures' => [ [ 'arn' => '<string>', 'detail' => '<string>', 'reason' => '<string>', ], // ... ], 'services' => [ [ 'capacityProviderStrategy' => [ [ 'base' => <integer>, 'capacityProvider' => '<string>', 'weight' => <integer>, ], // ... ], 'clusterArn' => '<string>', 'createdAt' => <DateTime>, 'createdBy' => '<string>', 'deploymentConfiguration' => [ 'alarms' => [ 'alarmNames' => ['<string>', ...], 'enable' => true || false, 'rollback' => true || false, ], 'deploymentCircuitBreaker' => [ 'enable' => true || false, 'rollback' => true || false, ], 'maximumPercent' => <integer>, 'minimumHealthyPercent' => <integer>, ], 'deploymentController' => [ 'type' => 'ECS|CODE_DEPLOY|EXTERNAL', ], 'deployments' => [ [ 'capacityProviderStrategy' => [ [ 'base' => <integer>, 'capacityProvider' => '<string>', 'weight' => <integer>, ], // ... ], 'createdAt' => <DateTime>, 'desiredCount' => <integer>, 'failedTasks' => <integer>, 'fargateEphemeralStorage' => [ 'kmsKeyId' => '<string>', ], 'id' => '<string>', 'launchType' => 'EC2|FARGATE|EXTERNAL', 'networkConfiguration' => [ 'awsvpcConfiguration' => [ 'assignPublicIp' => 'ENABLED|DISABLED', 'securityGroups' => ['<string>', ...], 'subnets' => ['<string>', ...], ], ], 'pendingCount' => <integer>, 'platformFamily' => '<string>', 'platformVersion' => '<string>', 'rolloutState' => 'COMPLETED|FAILED|IN_PROGRESS', 'rolloutStateReason' => '<string>', 'runningCount' => <integer>, 'serviceConnectConfiguration' => [ 'enabled' => true || false, 'logConfiguration' => [ 'logDriver' => 'json-file|syslog|journald|gelf|fluentd|awslogs|splunk|awsfirelens', 'options' => ['<string>', ...], 'secretOptions' => [ [ 'name' => '<string>', 'valueFrom' => '<string>', ], // ... ], ], 'namespace' => '<string>', 'services' => [ [ 'clientAliases' => [ [ 'dnsName' => '<string>', 'port' => <integer>, ], // ... ], 'discoveryName' => '<string>', 'ingressPortOverride' => <integer>, 'portName' => '<string>', 'timeout' => [ 'idleTimeoutSeconds' => <integer>, 'perRequestTimeoutSeconds' => <integer>, ], 'tls' => [ 'issuerCertificateAuthority' => [ 'awsPcaAuthorityArn' => '<string>', ], 'kmsKey' => '<string>', 'roleArn' => '<string>', ], ], // ... ], ], 'serviceConnectResources' => [ [ 'discoveryArn' => '<string>', 'discoveryName' => '<string>', ], // ... ], 'status' => '<string>', 'taskDefinition' => '<string>', 'updatedAt' => <DateTime>, 'volumeConfigurations' => [ [ 'managedEBSVolume' => [ 'encrypted' => true || false, 'filesystemType' => 'ext3|ext4|xfs|ntfs', 'iops' => <integer>, 'kmsKeyId' => '<string>', 'roleArn' => '<string>', 'sizeInGiB' => <integer>, 'snapshotId' => '<string>', 'tagSpecifications' => [ [ 'propagateTags' => 'TASK_DEFINITION|SERVICE|NONE', 'resourceType' => 'volume', 'tags' => [ [ 'key' => '<string>', 'value' => '<string>', ], // ... ], ], // ... ], 'throughput' => <integer>, 'volumeType' => '<string>', ], 'name' => '<string>', ], // ... ], ], // ... ], 'desiredCount' => <integer>, 'enableECSManagedTags' => true || false, 'enableExecuteCommand' => true || false, 'events' => [ [ 'createdAt' => <DateTime>, 'id' => '<string>', 'message' => '<string>', ], // ... ], 'healthCheckGracePeriodSeconds' => <integer>, 'launchType' => 'EC2|FARGATE|EXTERNAL', 'loadBalancers' => [ [ 'containerName' => '<string>', 'containerPort' => <integer>, 'loadBalancerName' => '<string>', 'targetGroupArn' => '<string>', ], // ... ], 'networkConfiguration' => [ 'awsvpcConfiguration' => [ 'assignPublicIp' => 'ENABLED|DISABLED', 'securityGroups' => ['<string>', ...], 'subnets' => ['<string>', ...], ], ], 'pendingCount' => <integer>, 'placementConstraints' => [ [ 'expression' => '<string>', 'type' => 'distinctInstance|memberOf', ], // ... ], 'placementStrategy' => [ [ 'field' => '<string>', 'type' => 'random|spread|binpack', ], // ... ], 'platformFamily' => '<string>', 'platformVersion' => '<string>', 'propagateTags' => 'TASK_DEFINITION|SERVICE|NONE', 'roleArn' => '<string>', 'runningCount' => <integer>, 'schedulingStrategy' => 'REPLICA|DAEMON', 'serviceArn' => '<string>', 'serviceName' => '<string>', 'serviceRegistries' => [ [ 'containerName' => '<string>', 'containerPort' => <integer>, 'port' => <integer>, 'registryArn' => '<string>', ], // ... ], 'status' => '<string>', 'tags' => [ [ 'key' => '<string>', 'value' => '<string>', ], // ... ], 'taskDefinition' => '<string>', 'taskSets' => [ [ 'capacityProviderStrategy' => [ [ 'base' => <integer>, 'capacityProvider' => '<string>', 'weight' => <integer>, ], // ... ], 'clusterArn' => '<string>', 'computedDesiredCount' => <integer>, 'createdAt' => <DateTime>, 'externalId' => '<string>', 'fargateEphemeralStorage' => [ 'kmsKeyId' => '<string>', ], 'id' => '<string>', 'launchType' => 'EC2|FARGATE|EXTERNAL', 'loadBalancers' => [ [ 'containerName' => '<string>', 'containerPort' => <integer>, 'loadBalancerName' => '<string>', 'targetGroupArn' => '<string>', ], // ... ], 'networkConfiguration' => [ 'awsvpcConfiguration' => [ 'assignPublicIp' => 'ENABLED|DISABLED', 'securityGroups' => ['<string>', ...], 'subnets' => ['<string>', ...], ], ], 'pendingCount' => <integer>, 'platformFamily' => '<string>', 'platformVersion' => '<string>', 'runningCount' => <integer>, 'scale' => [ 'unit' => 'PERCENT', 'value' => <float>, ], 'serviceArn' => '<string>', 'serviceRegistries' => [ [ 'containerName' => '<string>', 'containerPort' => <integer>, 'port' => <integer>, 'registryArn' => '<string>', ], // ... ], 'stabilityStatus' => 'STEADY_STATE|STABILIZING', 'stabilityStatusAt' => <DateTime>, 'startedBy' => '<string>', 'status' => '<string>', 'tags' => [ [ 'key' => '<string>', 'value' => '<string>', ], // ... ], 'taskDefinition' => '<string>', 'taskSetArn' => '<string>', 'updatedAt' => <DateTime>, ], // ... ], ], // ... ], ]
Result Details
Members
Errors
- ServerException:
These errors are usually caused by a server issue.
- ClientException:
These errors are usually caused by a client action. This client action might be using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be specifying an identifier that isn't valid.
The following list includes additional causes for the error:
-
The
RunTask
could not be processed because you use managed scaling and there is a capacity error because the quota of tasks in thePROVISIONING
per cluster has been reached. For information about the service quotas, see Amazon ECS service quotas.
-
- InvalidParameterException:
The specified parameter isn't valid. Review the available parameters for the API request.
- ClusterNotFoundException:
The specified cluster wasn't found. You can view your available clusters with ListClusters. Amazon ECS clusters are Region specific.
Examples
Example 1: To describe a service
This example provides descriptive information about the service named ``ecs-simple-service``.
$result = $client->describeServices([ 'services' => [ 'ecs-simple-service', ], ]);
Result syntax:
[ 'failures' => [ ], 'services' => [ [ 'clusterArn' => 'arn:aws:ecs:us-east-1:012345678910:cluster/default', 'createdAt' =>, 'deploymentConfiguration' => [ 'maximumPercent' => 200, 'minimumHealthyPercent' => 100, ], 'deployments' => [ [ 'createdAt' => , 'desiredCount' => 1, 'id' => 'ecs-svc/9223370564341623665', 'pendingCount' => 0, 'runningCount' => 0, 'status' => 'PRIMARY', 'taskDefinition' => 'arn:aws:ecs:us-east-1:012345678910:task-definition/hello_world:6', 'updatedAt' => , ], ], 'desiredCount' => 1, 'events' => [ [ 'createdAt' => , 'id' => '38c285e5-d335-4b68-8b15-e46dedc8e88d', 'message' => '(service ecs-simple-service) was unable to place a task because no container instance met all of its requirements. The closest matching (container-instance 3f4de1c5-ffdd-4954-af7e-75b4be0c8841) is already using a port required by your task. For more information, see the Troubleshooting section of the Amazon ECS Developer Guide.', ], ], 'loadBalancers' => [ ], 'pendingCount' => 0, 'runningCount' => 0, 'serviceArn' => 'arn:aws:ecs:us-east-1:012345678910:service/default/ecs-simple-service', 'serviceName' => 'ecs-simple-service', 'status' => 'ACTIVE', 'taskDefinition' => 'arn:aws:ecs:us-east-1:012345678910:task-definition/default/hello_world:6', ], ], ]
DescribeTaskDefinition
$result = $client->describeTaskDefinition
([/* ... */]); $promise = $client->describeTaskDefinitionAsync
([/* ... */]);
Describes a task definition. You can specify a family
and revision
to find information about a specific task definition, or you can simply specify the family to find the latest ACTIVE
revision in that family.
You can only describe INACTIVE
task definitions while an active task or service references them.
Parameter Syntax
$result = $client->describeTaskDefinition([ 'include' => ['<string>', ...], 'taskDefinition' => '<string>', // REQUIRED ]);
Parameter Details
Members
- include
-
- Type: Array of strings
Determines whether to see the resource tags for the task definition. If
TAGS
is specified, the tags are included in the response. If this field is omitted, tags aren't included in the response. - taskDefinition
-
- Required: Yes
- Type: string
The
family
for the latestACTIVE
revision,family
andrevision
(family:revision
) for a specific revision in the family, or full Amazon Resource Name (ARN) of the task definition to describe.
Result Syntax
[ 'tags' => [ [ 'key' => '<string>', 'value' => '<string>', ], // ... ], 'taskDefinition' => [ 'compatibilities' => ['<string>', ...], 'containerDefinitions' => [ [ 'command' => ['<string>', ...], 'cpu' => <integer>, 'credentialSpecs' => ['<string>', ...], 'dependsOn' => [ [ 'condition' => 'START|COMPLETE|SUCCESS|HEALTHY', 'containerName' => '<string>', ], // ... ], 'disableNetworking' => true || false, 'dnsSearchDomains' => ['<string>', ...], 'dnsServers' => ['<string>', ...], 'dockerLabels' => ['<string>', ...], 'dockerSecurityOptions' => ['<string>', ...], 'entryPoint' => ['<string>', ...], 'environment' => [ [ 'name' => '<string>', 'value' => '<string>', ], // ... ], 'environmentFiles' => [ [ 'type' => 's3', 'value' => '<string>', ], // ... ], 'essential' => true || false, 'extraHosts' => [ [ 'hostname' => '<string>', 'ipAddress' => '<string>', ], // ... ], 'firelensConfiguration' => [ 'options' => ['<string>', ...], 'type' => 'fluentd|fluentbit', ], 'healthCheck' => [ 'command' => ['<string>', ...], 'interval' => <integer>, 'retries' => <integer>, 'startPeriod' => <integer>, 'timeout' => <integer>, ], 'hostname' => '<string>', 'image' => '<string>', 'interactive' => true || false, 'links' => ['<string>', ...], 'linuxParameters' => [ 'capabilities' => [ 'add' => ['<string>', ...], 'drop' => ['<string>', ...], ], 'devices' => [ [ 'containerPath' => '<string>', 'hostPath' => '<string>', 'permissions' => ['<string>', ...], ], // ... ], 'initProcessEnabled' => true || false, 'maxSwap' => <integer>, 'sharedMemorySize' => <integer>, 'swappiness' => <integer>, 'tmpfs' => [ [ 'containerPath' => '<string>', 'mountOptions' => ['<string>', ...], 'size' => <integer>, ], // ... ], ], 'logConfiguration' => [ 'logDriver' => 'json-file|syslog|journald|gelf|fluentd|awslogs|splunk|awsfirelens', 'options' => ['<string>', ...], 'secretOptions' => [ [ 'name' => '<string>', 'valueFrom' => '<string>', ], // ... ], ], 'memory' => <integer>, 'memoryReservation' => <integer>, 'mountPoints' => [ [ 'containerPath' => '<string>', 'readOnly' => true || false, 'sourceVolume' => '<string>', ], // ... ], 'name' => '<string>', 'portMappings' => [ [ 'appProtocol' => 'http|http2|grpc', 'containerPort' => <integer>, 'containerPortRange' => '<string>', 'hostPort' => <integer>, 'name' => '<string>', 'protocol' => 'tcp|udp', ], // ... ], 'privileged' => true || false, 'pseudoTerminal' => true || false, 'readonlyRootFilesystem' => true || false, 'repositoryCredentials' => [ 'credentialsParameter' => '<string>', ], 'resourceRequirements' => [ [ 'type' => 'GPU|InferenceAccelerator', 'value' => '<string>', ], // ... ], 'restartPolicy' => [ 'enabled' => true || false, 'ignoredExitCodes' => [<integer>, ...], 'restartAttemptPeriod' => <integer>, ], 'secrets' => [ [ 'name' => '<string>', 'valueFrom' => '<string>', ], // ... ], 'startTimeout' => <integer>, 'stopTimeout' => <integer>, 'systemControls' => [ [ 'namespace' => '<string>', 'value' => '<string>', ], // ... ], 'ulimits' => [ [ 'hardLimit' => <integer>, 'name' => 'core|cpu|data|fsize|locks|memlock|msgqueue|nice|nofile|nproc|rss|rtprio|rttime|sigpending|stack', 'softLimit' => <integer>, ], // ... ], 'user' => '<string>', 'volumesFrom' => [ [ 'readOnly' => true || false, 'sourceContainer' => '<string>', ], // ... ], 'workingDirectory' => '<string>', ], // ... ], 'cpu' => '<string>', 'deregisteredAt' => <DateTime>, 'ephemeralStorage' => [ 'sizeInGiB' => <integer>, ], 'executionRoleArn' => '<string>', 'family' => '<string>', 'inferenceAccelerators' => [ [ 'deviceName' => '<string>', 'deviceType' => '<string>', ], // ... ], 'ipcMode' => 'host|task|none', 'memory' => '<string>', 'networkMode' => 'bridge|host|awsvpc|none', 'pidMode' => 'host|task', 'placementConstraints' => [ [ 'expression' => '<string>', 'type' => 'memberOf', ], // ... ], 'proxyConfiguration' => [ 'containerName' => '<string>', 'properties' => [ [ 'name' => '<string>', 'value' => '<string>', ], // ... ], 'type' => 'APPMESH', ], 'registeredAt' => <DateTime>, 'registeredBy' => '<string>', 'requiresAttributes' => [ [ 'name' => '<string>', 'targetId' => '<string>', 'targetType' => 'container-instance', 'value' => '<string>', ], // ... ], 'requiresCompatibilities' => ['<string>', ...], 'revision' => <integer>, 'runtimePlatform' => [ 'cpuArchitecture' => 'X86_64|ARM64', 'operatingSystemFamily' => 'WINDOWS_SERVER_2019_FULL|WINDOWS_SERVER_2019_CORE|WINDOWS_SERVER_2016_FULL|WINDOWS_SERVER_2004_CORE|WINDOWS_SERVER_2022_CORE|WINDOWS_SERVER_2022_FULL|WINDOWS_SERVER_20H2_CORE|LINUX', ], 'status' => 'ACTIVE|INACTIVE|DELETE_IN_PROGRESS', 'taskDefinitionArn' => '<string>', 'taskRoleArn' => '<string>', 'volumes' => [ [ 'configuredAtLaunch' => true || false, 'dockerVolumeConfiguration' => [ 'autoprovision' => true || false, 'driver' => '<string>', 'driverOpts' => ['<string>', ...], 'labels' => ['<string>', ...], 'scope' => 'task|shared', ], 'efsVolumeConfiguration' => [ 'authorizationConfig' => [ 'accessPointId' => '<string>', 'iam' => 'ENABLED|DISABLED', ], 'fileSystemId' => '<string>', 'rootDirectory' => '<string>', 'transitEncryption' => 'ENABLED|DISABLED', 'transitEncryptionPort' => <integer>, ], 'fsxWindowsFileServerVolumeConfiguration' => [ 'authorizationConfig' => [ 'credentialsParameter' => '<string>', 'domain' => '<string>', ], 'fileSystemId' => '<string>', 'rootDirectory' => '<string>', ], 'host' => [ 'sourcePath' => '<string>', ], 'name' => '<string>', ], // ... ], ], ]
Result Details
Members
- tags
-
- Type: Array of Tag structures
The metadata that's applied to the task definition to help you categorize and organize them. Each tag consists of a key and an optional value. You define both.
The following basic restrictions apply to tags:
-
Maximum number of tags per resource - 50
-
For each resource, each tag key must be unique, and each tag key can have only one value.
-
Maximum key length - 128 Unicode characters in UTF-8
-
Maximum value length - 256 Unicode characters in UTF-8
-
If your tagging schema is used across multiple services and resources, remember that other services may have restrictions on allowed characters. Generally allowed characters are: letters, numbers, and spaces representable in UTF-8, and the following characters: + - = . _ : / @.
-
Tag keys and values are case-sensitive.
-
Do not use
aws:
,AWS:
, or any upper or lowercase combination of such as a prefix for either keys or values as it is reserved for Amazon Web Services use. You cannot edit or delete tag keys or values with this prefix. Tags with this prefix do not count against your tags per resource limit.
- taskDefinition
-
- Type: TaskDefinition structure
The full task definition description.
Errors
- ServerException:
These errors are usually caused by a server issue.
- ClientException:
These errors are usually caused by a client action. This client action might be using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be specifying an identifier that isn't valid.
The following list includes additional causes for the error:
-
The
RunTask
could not be processed because you use managed scaling and there is a capacity error because the quota of tasks in thePROVISIONING
per cluster has been reached. For information about the service quotas, see Amazon ECS service quotas.
-
- InvalidParameterException:
The specified parameter isn't valid. Review the available parameters for the API request.
Examples
Example 1: To describe a task definition
This example provides a description of the specified task definition.
$result = $client->describeTaskDefinition([ 'taskDefinition' => 'hello_world:8', ]);
Result syntax:
[ 'taskDefinition' => [ 'containerDefinitions' => [ [ 'name' => 'wordpress', 'cpu' => 10, 'environment' => [ ], 'essential' => 1, 'image' => 'wordpress', 'links' => [ 'mysql', ], 'memory' => 500, 'mountPoints' => [ ], 'portMappings' => [ [ 'containerPort' => 80, 'hostPort' => 80, ], ], 'volumesFrom' => [ ], ], [ 'name' => 'mysql', 'cpu' => 10, 'environment' => [ [ 'name' => 'MYSQL_ROOT_PASSWORD', 'value' => 'password', ], ], 'essential' => 1, 'image' => 'mysql', 'memory' => 500, 'mountPoints' => [ ], 'portMappings' => [ ], 'volumesFrom' => [ ], ], ], 'family' => 'hello_world', 'revision' => 8, 'taskDefinitionArn' => 'arn:aws:ecs:us-east-1::task-definition/hello_world:8', 'volumes' => [ ], ], ]
DescribeTaskSets
$result = $client->describeTaskSets
([/* ... */]); $promise = $client->describeTaskSetsAsync
([/* ... */]);
Describes the task sets in the specified cluster and service. This is used when a service uses the EXTERNAL
deployment controller type. For more information, see Amazon ECS Deployment Types in the Amazon Elastic Container Service Developer Guide.
Parameter Syntax
$result = $client->describeTaskSets([ 'cluster' => '<string>', // REQUIRED 'include' => ['<string>', ...], 'service' => '<string>', // REQUIRED 'taskSets' => ['<string>', ...], ]);
Parameter Details
Members
- cluster
-
- Required: Yes
- Type: string
The short name or full Amazon Resource Name (ARN) of the cluster that hosts the service that the task sets exist in.
- include
-
- Type: Array of strings
Specifies whether to see the resource tags for the task set. If
TAGS
is specified, the tags are included in the response. If this field is omitted, tags aren't included in the response. - service
-
- Required: Yes
- Type: string
The short name or full Amazon Resource Name (ARN) of the service that the task sets exist in.
- taskSets
-
- Type: Array of strings
The ID or full Amazon Resource Name (ARN) of task sets to describe.
Result Syntax
[ 'failures' => [ [ 'arn' => '<string>', 'detail' => '<string>', 'reason' => '<string>', ], // ... ], 'taskSets' => [ [ 'capacityProviderStrategy' => [ [ 'base' => <integer>, 'capacityProvider' => '<string>', 'weight' => <integer>, ], // ... ], 'clusterArn' => '<string>', 'computedDesiredCount' => <integer>, 'createdAt' => <DateTime>, 'externalId' => '<string>', 'fargateEphemeralStorage' => [ 'kmsKeyId' => '<string>', ], 'id' => '<string>', 'launchType' => 'EC2|FARGATE|EXTERNAL', 'loadBalancers' => [ [ 'containerName' => '<string>', 'containerPort' => <integer>, 'loadBalancerName' => '<string>', 'targetGroupArn' => '<string>', ], // ... ], 'networkConfiguration' => [ 'awsvpcConfiguration' => [ 'assignPublicIp' => 'ENABLED|DISABLED', 'securityGroups' => ['<string>', ...], 'subnets' => ['<string>', ...], ], ], 'pendingCount' => <integer>, 'platformFamily' => '<string>', 'platformVersion' => '<string>', 'runningCount' => <integer>, 'scale' => [ 'unit' => 'PERCENT', 'value' => <float>, ], 'serviceArn' => '<string>', 'serviceRegistries' => [ [ 'containerName' => '<string>', 'containerPort' => <integer>, 'port' => <integer>, 'registryArn' => '<string>', ], // ... ], 'stabilityStatus' => 'STEADY_STATE|STABILIZING', 'stabilityStatusAt' => <DateTime>, 'startedBy' => '<string>', 'status' => '<string>', 'tags' => [ [ 'key' => '<string>', 'value' => '<string>', ], // ... ], 'taskDefinition' => '<string>', 'taskSetArn' => '<string>', 'updatedAt' => <DateTime>, ], // ... ], ]
Result Details
Members
Errors
- ServerException:
These errors are usually caused by a server issue.
- ClientException:
These errors are usually caused by a client action. This client action might be using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be specifying an identifier that isn't valid.
The following list includes additional causes for the error:
-
The
RunTask
could not be processed because you use managed scaling and there is a capacity error because the quota of tasks in thePROVISIONING
per cluster has been reached. For information about the service quotas, see Amazon ECS service quotas.
-
- InvalidParameterException:
The specified parameter isn't valid. Review the available parameters for the API request.
- ClusterNotFoundException:
The specified cluster wasn't found. You can view your available clusters with ListClusters. Amazon ECS clusters are Region specific.
- UnsupportedFeatureException:
The specified task isn't supported in this Region.
- AccessDeniedException:
You don't have authorization to perform the requested action.
- ServiceNotFoundException:
The specified service wasn't found. You can view your available services with ListServices. Amazon ECS services are cluster specific and Region specific.
- ServiceNotActiveException:
The specified service isn't active. You can't update a service that's inactive. If you have previously deleted a service, you can re-create it with CreateService.
DescribeTasks
$result = $client->describeTasks
([/* ... */]); $promise = $client->describeTasksAsync
([/* ... */]);
Describes a specified task or tasks.
Currently, stopped tasks appear in the returned results for at least one hour.
If you have tasks with tags, and then delete the cluster, the tagged tasks are returned in the response. If you create a new cluster with the same name as the deleted cluster, the tagged tasks are not included in the response.
Parameter Syntax
$result = $client->describeTasks([ 'cluster' => '<string>', 'include' => ['<string>', ...], 'tasks' => ['<string>', ...], // REQUIRED ]);
Parameter Details
Members
- cluster
-
- Type: string
The short name or full Amazon Resource Name (ARN) of the cluster that hosts the task or tasks to describe. If you do not specify a cluster, the default cluster is assumed. This parameter is required if the task or tasks you are describing were launched in any cluster other than the default cluster.
- include
-
- Type: Array of strings
Specifies whether you want to see the resource tags for the task. If
TAGS
is specified, the tags are included in the response. If this field is omitted, tags aren't included in the response. - tasks
-
- Required: Yes
- Type: Array of strings
A list of up to 100 task IDs or full ARN entries.
Result Syntax
[ 'failures' => [ [ 'arn' => '<string>', 'detail' => '<string>', 'reason' => '<string>', ], // ... ], 'tasks' => [ [ 'attachments' => [ [ 'details' => [ [ 'name' => '<string>', 'value' => '<string>', ], // ... ], 'id' => '<string>', 'status' => '<string>', 'type' => '<string>', ], // ... ], 'attributes' => [ [ 'name' => '<string>', 'targetId' => '<string>', 'targetType' => 'container-instance', 'value' => '<string>', ], // ... ], 'availabilityZone' => '<string>', 'capacityProviderName' => '<string>', 'clusterArn' => '<string>', 'connectivity' => 'CONNECTED|DISCONNECTED', 'connectivityAt' => <DateTime>, 'containerInstanceArn' => '<string>', 'containers' => [ [ 'containerArn' => '<string>', 'cpu' => '<string>', 'exitCode' => <integer>, 'gpuIds' => ['<string>', ...], 'healthStatus' => 'HEALTHY|UNHEALTHY|UNKNOWN', 'image' => '<string>', 'imageDigest' => '<string>', 'lastStatus' => '<string>', 'managedAgents' => [ [ 'lastStartedAt' => <DateTime>, 'lastStatus' => '<string>', 'name' => 'ExecuteCommandAgent', 'reason' => '<string>', ], // ... ], 'memory' => '<string>', 'memoryReservation' => '<string>', 'name' => '<string>', 'networkBindings' => [ [ 'bindIP' => '<string>', 'containerPort' => <integer>, 'containerPortRange' => '<string>', 'hostPort' => <integer>, 'hostPortRange' => '<string>', 'protocol' => 'tcp|udp', ], // ... ], 'networkInterfaces' => [ [ 'attachmentId' => '<string>', 'ipv6Address' => '<string>', 'privateIpv4Address' => '<string>', ], // ... ], 'reason' => '<string>', 'runtimeId' => '<string>', 'taskArn' => '<string>', ], // ... ], 'cpu' => '<string>', 'createdAt' => <DateTime>, 'desiredStatus' => '<string>', 'enableExecuteCommand' => true || false, 'ephemeralStorage' => [ 'sizeInGiB' => <integer>, ], 'executionStoppedAt' => <DateTime>, 'fargateEphemeralStorage' => [ 'kmsKeyId' => '<string>', 'sizeInGiB' => <integer>, ], 'group' => '<string>', 'healthStatus' => 'HEALTHY|UNHEALTHY|UNKNOWN', 'inferenceAccelerators' => [ [ 'deviceName' => '<string>', 'deviceType' => '<string>', ], // ... ], 'lastStatus' => '<string>', 'launchType' => 'EC2|FARGATE|EXTERNAL', 'memory' => '<string>', 'overrides' => [ 'containerOverrides' => [ [ 'command' => ['<string>', ...], 'cpu' => <integer>, 'environment' => [ [ 'name' => '<string>', 'value' => '<string>', ], // ... ], 'environmentFiles' => [ [ 'type' => 's3', 'value' => '<string>', ], // ... ], 'memory' => <integer>, 'memoryReservation' => <integer>, 'name' => '<string>', 'resourceRequirements' => [ [ 'type' => 'GPU|InferenceAccelerator', 'value' => '<string>', ], // ... ], ], // ... ], 'cpu' => '<string>', 'ephemeralStorage' => [ 'sizeInGiB' => <integer>, ], 'executionRoleArn' => '<string>', 'inferenceAcceleratorOverrides' => [ [ 'deviceName' => '<string>', 'deviceType' => '<string>', ], // ... ], 'memory' => '<string>', 'taskRoleArn' => '<string>', ], 'platformFamily' => '<string>', 'platformVersion' => '<string>', 'pullStartedAt' => <DateTime>, 'pullStoppedAt' => <DateTime>, 'startedAt' => <DateTime>, 'startedBy' => '<string>', 'stopCode' => 'TaskFailedToStart|EssentialContainerExited|UserInitiated|ServiceSchedulerInitiated|SpotInterruption|TerminationNotice', 'stoppedAt' => <DateTime>, 'stoppedReason' => '<string>', 'stoppingAt' => <DateTime>, 'tags' => [ [ 'key' => '<string>', 'value' => '<string>', ], // ... ], 'taskArn' => '<string>', 'taskDefinitionArn' => '<string>', 'version' => <integer>, ], // ... ], ]
Result Details
Members
Errors
- ServerException:
These errors are usually caused by a server issue.
- ClientException:
These errors are usually caused by a client action. This client action might be using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be specifying an identifier that isn't valid.
The following list includes additional causes for the error:
-
The
RunTask
could not be processed because you use managed scaling and there is a capacity error because the quota of tasks in thePROVISIONING
per cluster has been reached. For information about the service quotas, see Amazon ECS service quotas.
-
- InvalidParameterException:
The specified parameter isn't valid. Review the available parameters for the API request.
- ClusterNotFoundException:
The specified cluster wasn't found. You can view your available clusters with ListClusters. Amazon ECS clusters are Region specific.
Examples
Example 1: To describe a task
This example provides a description of the specified task, using the task UUID as an identifier.
$result = $client->describeTasks([ 'tasks' => [ 'c5cba4eb-5dad-405e-96db-71ef8eefe6a8', ], ]);
Result syntax:
[ 'failures' => [ ], 'tasks' => [ [ 'clusterArn' => 'arn:aws:ecs:: :cluster/default', 'containerInstanceArn' => 'arn:aws:ecs: : :container-instance/default/18f9eda5-27d7-4c19-b133-45adc516e8fb', 'containers' => [ [ 'name' => 'ecs-demo', 'containerArn' => 'arn:aws:ecs: : :container/7c01765b-c588-45b3-8290-4ba38bd6c5a6', 'lastStatus' => 'RUNNING', 'networkBindings' => [ [ 'bindIP' => '0.0.0.0', 'containerPort' => 80, 'hostPort' => 80, ], ], 'taskArn' => 'arn:aws:ecs: : :task/default/c5cba4eb-5dad-405e-96db-71ef8eefe6a8', ], ], 'desiredStatus' => 'RUNNING', 'lastStatus' => 'RUNNING', 'overrides' => [ 'containerOverrides' => [ [ 'name' => 'ecs-demo', ], ], ], 'startedBy' => 'ecs-svc/9223370608528463088', 'taskArn' => 'arn:aws:ecs: : :task/default/c5cba4eb-5dad-405e-96db-71ef8eefe6a8', 'taskDefinitionArn' => 'arn:aws:ecs: : :task-definition/amazon-ecs-sample:1', ], ], ]
DiscoverPollEndpoint
$result = $client->discoverPollEndpoint
([/* ... */]); $promise = $client->discoverPollEndpointAsync
([/* ... */]);
This action is only used by the Amazon ECS agent, and it is not intended for use outside of the agent.
Returns an endpoint for the Amazon ECS agent to poll for updates.
Parameter Syntax
$result = $client->discoverPollEndpoint([ 'cluster' => '<string>', 'containerInstance' => '<string>', ]);
Parameter Details
Members
- cluster
-
- Type: string
The short name or full Amazon Resource Name (ARN) of the cluster that the container instance belongs to.
- containerInstance
-
- Type: string
The container instance ID or full ARN of the container instance. For more information about the ARN format, see Amazon Resource Name (ARN) in the Amazon ECS Developer Guide.
Result Syntax
[ 'endpoint' => '<string>', 'serviceConnectEndpoint' => '<string>', 'telemetryEndpoint' => '<string>', ]
Result Details
Members
- endpoint
-
- Type: string
The endpoint for the Amazon ECS agent to poll.
- serviceConnectEndpoint
-
- Type: string
The endpoint for the Amazon ECS agent to poll for Service Connect configuration. For more information, see Service Connect in the Amazon Elastic Container Service Developer Guide.
- telemetryEndpoint
-
- Type: string
The telemetry endpoint for the Amazon ECS agent.
Errors
- ServerException:
These errors are usually caused by a server issue.
- ClientException:
These errors are usually caused by a client action. This client action might be using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be specifying an identifier that isn't valid.
The following list includes additional causes for the error:
-
The
RunTask
could not be processed because you use managed scaling and there is a capacity error because the quota of tasks in thePROVISIONING
per cluster has been reached. For information about the service quotas, see Amazon ECS service quotas.
-
ExecuteCommand
$result = $client->executeCommand
([/* ... */]); $promise = $client->executeCommandAsync
([/* ... */]);
Runs a command remotely on a container within a task.
If you use a condition key in your IAM policy to refine the conditions for the policy statement, for example limit the actions to a specific cluster, you receive an AccessDeniedException
when there is a mismatch between the condition key value and the corresponding parameter value.
For information about required permissions and considerations, see Using Amazon ECS Exec for debugging in the Amazon ECS Developer Guide.
Parameter Syntax
$result = $client->executeCommand([ 'cluster' => '<string>', 'command' => '<string>', // REQUIRED 'container' => '<string>', 'interactive' => true || false, // REQUIRED 'task' => '<string>', // REQUIRED ]);
Parameter Details
Members
- cluster
-
- Type: string
The Amazon Resource Name (ARN) or short name of the cluster the task is running in. If you do not specify a cluster, the default cluster is assumed.
- command
-
- Required: Yes
- Type: string
The command to run on the container.
- container
-
- Type: string
The name of the container to execute the command on. A container name only needs to be specified for tasks containing multiple containers.
- interactive
-
- Required: Yes
- Type: boolean
Use this flag to run your command in interactive mode.
- task
-
- Required: Yes
- Type: string
The Amazon Resource Name (ARN) or ID of the task the container is part of.
Result Syntax
[ 'clusterArn' => '<string>', 'containerArn' => '<string>', 'containerName' => '<string>', 'interactive' => true || false, 'session' => [ 'sessionId' => '<string>', 'streamUrl' => '<string>', 'tokenValue' => '<string>', ], 'taskArn' => '<string>', ]
Result Details
Members
- clusterArn
-
- Type: string
The Amazon Resource Name (ARN) of the cluster.
- containerArn
-
- Type: string
The Amazon Resource Name (ARN) of the container.
- containerName
-
- Type: string
The name of the container.
- interactive
-
- Type: boolean
Determines whether the execute command session is running in interactive mode. Amazon ECS only supports initiating interactive sessions, so you must specify
true
for this value. - session
-
- Type: Session structure
The details of the SSM session that was created for this instance of execute-command.
- taskArn
-
- Type: string
The Amazon Resource Name (ARN) of the task.
Errors
- ServerException:
These errors are usually caused by a server issue.
- ClientException:
These errors are usually caused by a client action. This client action might be using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be specifying an identifier that isn't valid.
The following list includes additional causes for the error:
-
The
RunTask
could not be processed because you use managed scaling and there is a capacity error because the quota of tasks in thePROVISIONING
per cluster has been reached. For information about the service quotas, see Amazon ECS service quotas.
-
- InvalidParameterException:
The specified parameter isn't valid. Review the available parameters for the API request.
- AccessDeniedException:
You don't have authorization to perform the requested action.
- ClusterNotFoundException:
The specified cluster wasn't found. You can view your available clusters with ListClusters. Amazon ECS clusters are Region specific.
- TargetNotConnectedException:
The execute command cannot run. This error can be caused by any of the following configuration issues:
-
Incorrect IAM permissions
-
The SSM agent is not installed or is not running
-
There is an interface Amazon VPC endpoint for Amazon ECS, but there is not one for Systems Manager Session Manager
For information about how to troubleshoot the issues, see Troubleshooting issues with ECS Exec in the Amazon Elastic Container Service Developer Guide.
-
GetTaskProtection
$result = $client->getTaskProtection
([/* ... */]); $promise = $client->getTaskProtectionAsync
([/* ... */]);
Retrieves the protection status of tasks in an Amazon ECS service.
Parameter Syntax
$result = $client->getTaskProtection([ 'cluster' => '<string>', // REQUIRED 'tasks' => ['<string>', ...], ]);
Parameter Details
Members
- cluster
-
- Required: Yes
- Type: string
The short name or full Amazon Resource Name (ARN) of the cluster that hosts the service that the task sets exist in.
- tasks
-
- Type: Array of strings
A list of up to 100 task IDs or full ARN entries.
Result Syntax
[ 'failures' => [ [ 'arn' => '<string>', 'detail' => '<string>', 'reason' => '<string>', ], // ... ], 'protectedTasks' => [ [ 'expirationDate' => <DateTime>, 'protectionEnabled' => true || false, 'taskArn' => '<string>', ], // ... ], ]
Result Details
Members
- failures
-
- Type: Array of Failure structures
Any failures associated with the call.
- protectedTasks
-
- Type: Array of ProtectedTask structures
A list of tasks with the following information.
-
taskArn
: The task ARN. -
protectionEnabled
: The protection status of the task. If scale-in protection is turned on for a task, the value istrue
. Otherwise, it isfalse
. -
expirationDate
: The epoch time when protection for the task will expire.
Errors
- AccessDeniedException:
You don't have authorization to perform the requested action.
- ClientException:
These errors are usually caused by a client action. This client action might be using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be specifying an identifier that isn't valid.
The following list includes additional causes for the error:
-
The
RunTask
could not be processed because you use managed scaling and there is a capacity error because the quota of tasks in thePROVISIONING
per cluster has been reached. For information about the service quotas, see Amazon ECS service quotas.
-
- ClusterNotFoundException:
The specified cluster wasn't found. You can view your available clusters with ListClusters. Amazon ECS clusters are Region specific.
- InvalidParameterException:
The specified parameter isn't valid. Review the available parameters for the API request.
- ResourceNotFoundException:
The specified resource wasn't found.
- ServerException:
These errors are usually caused by a server issue.
- UnsupportedFeatureException:
The specified task isn't supported in this Region.
Examples
Example 1: To get the protection status of a task
In this example, we get the protection status for a single task.
$result = $client->getTaskProtection([ 'cluster' => 'test-task-protection', 'tasks' => [ 'b8b1cf532d0e46ba8d44a40d1de16772', ], ]);
Result syntax:
[ 'failures' => [ ], 'protectedTasks' => [ [ 'expirationDate' =>, 'protectionEnabled' => 1, 'taskArn' => 'arn:aws:ecs:us-west-2:012345678910:task/default/b8b1cf532d0e46ba8d44a40d1de16772', ], ], ]
ListAccountSettings
$result = $client->listAccountSettings
([/* ... */]); $promise = $client->listAccountSettingsAsync
([/* ... */]);
Lists the account settings for a specified principal.
Parameter Syntax
$result = $client->listAccountSettings([ 'effectiveSettings' => true || false, 'maxResults' => <integer>, 'name' => 'serviceLongArnFormat|taskLongArnFormat|containerInstanceLongArnFormat|awsvpcTrunking|containerInsights|fargateFIPSMode|tagResourceAuthorization|fargateTaskRetirementWaitPeriod|guardDutyActivate', 'nextToken' => '<string>', 'principalArn' => '<string>', 'value' => '<string>', ]);
Parameter Details
Members
- effectiveSettings
-
- Type: boolean
Determines whether to return the effective settings. If
true
, the account settings for the root user or the default setting for theprincipalArn
are returned. Iffalse
, the account settings for theprincipalArn
are returned if they're set. Otherwise, no account settings are returned. - maxResults
-
- Type: int
The maximum number of account setting results returned by
ListAccountSettings
in paginated output. When this parameter is used,ListAccountSettings
only returnsmaxResults
results in a single page along with anextToken
response element. The remaining results of the initial request can be seen by sending anotherListAccountSettings
request with the returnednextToken
value. This value can be between 1 and 10. If this parameter isn't used, thenListAccountSettings
returns up to 10 results and anextToken
value if applicable. - name
-
- Type: string
The name of the account setting you want to list the settings for.
- nextToken
-
- Type: string
The
nextToken
value returned from aListAccountSettings
request indicating that more results are available to fulfill the request and further calls will be needed. IfmaxResults
was provided, it's possible the number of results to be fewer thanmaxResults
.This token should be treated as an opaque identifier that is only used to retrieve the next items in a list and not for other programmatic purposes.
- principalArn
-
- Type: string
The ARN of the principal, which can be a user, role, or the root user. If this field is omitted, the account settings are listed only for the authenticated user.
Federated users assume the account setting of the root user and can't have explicit account settings set for them.
- value
-
- Type: string
The value of the account settings to filter results with. You must also specify an account setting name to use this parameter.
Result Syntax
[ 'nextToken' => '<string>', 'settings' => [ [ 'name' => 'serviceLongArnFormat|taskLongArnFormat|containerInstanceLongArnFormat|awsvpcTrunking|containerInsights|fargateFIPSMode|tagResourceAuthorization|fargateTaskRetirementWaitPeriod|guardDutyActivate', 'principalArn' => '<string>', 'type' => 'user|aws_managed', 'value' => '<string>', ], // ... ], ]
Result Details
Members
- nextToken
-
- Type: string
The
nextToken
value to include in a futureListAccountSettings
request. When the results of aListAccountSettings
request exceedmaxResults
, this value can be used to retrieve the next page of results. This value isnull
when there are no more results to return. - settings
-
- Type: Array of Setting structures
The account settings for the resource.
Errors
- ServerException:
These errors are usually caused by a server issue.
- ClientException:
These errors are usually caused by a client action. This client action might be using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be specifying an identifier that isn't valid.
The following list includes additional causes for the error:
-
The
RunTask
could not be processed because you use managed scaling and there is a capacity error because the quota of tasks in thePROVISIONING
per cluster has been reached. For information about the service quotas, see Amazon ECS service quotas.
-
- InvalidParameterException:
The specified parameter isn't valid. Review the available parameters for the API request.
Examples
Example 1: To view your effective account settings
This example displays the effective account settings for your account.
$result = $client->listAccountSettings([ 'effectiveSettings' => 1, ]);
Result syntax:
[ 'settings' => [ [ 'name' => 'containerInstanceLongArnFormat', 'value' => 'disabled', 'principalArn' => 'arn:aws:iam:::user/principalName', ], [ 'name' => 'serviceLongArnFormat', 'value' => 'enabled', 'principalArn' => 'arn:aws:iam:: :user/principalName', ], [ 'name' => 'taskLongArnFormat', 'value' => 'disabled', 'principalArn' => 'arn:aws:iam:: :user/principalName', ], ], ]
Example 2: To view the effective account settings for a specific IAM user or IAM role
This example displays the effective account settings for the specified user or role.
$result = $client->listAccountSettings([ 'effectiveSettings' => 1, 'principalArn' => 'arn:aws:iam:::user/principalName', ]);
Result syntax:
[ 'settings' => [ [ 'name' => 'containerInstanceLongArnFormat', 'value' => 'disabled', 'principalArn' => 'arn:aws:iam:::user/principalName', ], [ 'name' => 'serviceLongArnFormat', 'value' => 'enabled', 'principalArn' => 'arn:aws:iam:: :user/principalName', ], [ 'name' => 'taskLongArnFormat', 'value' => 'disabled', 'principalArn' => 'arn:aws:iam:: :user/principalName', ], ], ]
ListAttributes
$result = $client->listAttributes
([/* ... */]); $promise = $client->listAttributesAsync
([/* ... */]);
Lists the attributes for Amazon ECS resources within a specified target type and cluster. When you specify a target type and cluster, ListAttributes
returns a list of attribute objects, one for each attribute on each resource. You can filter the list of results to a single attribute name to only return results that have that name. You can also filter the results by attribute name and value. You can do this, for example, to see which container instances in a cluster are running a Linux AMI (ecs.os-type=linux
).
Parameter Syntax
$result = $client->listAttributes([ 'attributeName' => '<string>', 'attributeValue' => '<string>', 'cluster' => '<string>', 'maxResults' => <integer>, 'nextToken' => '<string>', 'targetType' => 'container-instance', // REQUIRED ]);
Parameter Details
Members
- attributeName
-
- Type: string
The name of the attribute to filter the results with.
- attributeValue
-
- Type: string
The value of the attribute to filter results with. You must also specify an attribute name to use this parameter.
- cluster
-
- Type: string
The short name or full Amazon Resource Name (ARN) of the cluster to list attributes. If you do not specify a cluster, the default cluster is assumed.
- maxResults
-
- Type: int
The maximum number of cluster results that
ListAttributes
returned in paginated output. When this parameter is used,ListAttributes
only returnsmaxResults
results in a single page along with anextToken
response element. The remaining results of the initial request can be seen by sending anotherListAttributes
request with the returnednextToken
value. This value can be between 1 and 100. If this parameter isn't used, thenListAttributes
returns up to 100 results and anextToken
value if applicable. - nextToken
-
- Type: string
The
nextToken
value returned from aListAttributes
request indicating that more results are available to fulfill the request and further calls are needed. IfmaxResults
was provided, it's possible the number of results to be fewer thanmaxResults
.This token should be treated as an opaque identifier that is only used to retrieve the next items in a list and not for other programmatic purposes.
- targetType
-
- Required: Yes
- Type: string
The type of the target to list attributes with.
Result Syntax
[ 'attributes' => [ [ 'name' => '<string>', 'targetId' => '<string>', 'targetType' => 'container-instance', 'value' => '<string>', ], // ... ], 'nextToken' => '<string>', ]
Result Details
Members
- attributes
-
- Type: Array of Attribute structures
A list of attribute objects that meet the criteria of the request.
- nextToken
-
- Type: string
The
nextToken
value to include in a futureListAttributes
request. When the results of aListAttributes
request exceedmaxResults
, this value can be used to retrieve the next page of results. This value isnull
when there are no more results to return.
Errors
- ClusterNotFoundException:
The specified cluster wasn't found. You can view your available clusters with ListClusters. Amazon ECS clusters are Region specific.
- InvalidParameterException:
The specified parameter isn't valid. Review the available parameters for the API request.
ListClusters
$result = $client->listClusters
([/* ... */]); $promise = $client->listClustersAsync
([/* ... */]);
Returns a list of existing clusters.
Parameter Syntax
$result = $client->listClusters([ 'maxResults' => <integer>, 'nextToken' => '<string>', ]);
Parameter Details
Members
- maxResults
-
- Type: int
The maximum number of cluster results that
ListClusters
returned in paginated output. When this parameter is used,ListClusters
only returnsmaxResults
results in a single page along with anextToken
response element. The remaining results of the initial request can be seen by sending anotherListClusters
request with the returnednextToken
value. This value can be between 1 and 100. If this parameter isn't used, thenListClusters
returns up to 100 results and anextToken
value if applicable. - nextToken
-
- Type: string
The
nextToken
value returned from aListClusters
request indicating that more results are available to fulfill the request and further calls are needed. IfmaxResults
was provided, it's possible the number of results to be fewer thanmaxResults
.This token should be treated as an opaque identifier that is only used to retrieve the next items in a list and not for other programmatic purposes.
Result Syntax
[ 'clusterArns' => ['<string>', ...], 'nextToken' => '<string>', ]
Result Details
Members
- clusterArns
-
- Type: Array of strings
The list of full Amazon Resource Name (ARN) entries for each cluster that's associated with your account.
- nextToken
-
- Type: string
The
nextToken
value to include in a futureListClusters
request. When the results of aListClusters
request exceedmaxResults
, this value can be used to retrieve the next page of results. This value isnull
when there are no more results to return.
Errors
- ServerException:
These errors are usually caused by a server issue.
- ClientException:
These errors are usually caused by a client action. This client action might be using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be specifying an identifier that isn't valid.
The following list includes additional causes for the error:
-
The
RunTask
could not be processed because you use managed scaling and there is a capacity error because the quota of tasks in thePROVISIONING
per cluster has been reached. For information about the service quotas, see Amazon ECS service quotas.
-
- InvalidParameterException:
The specified parameter isn't valid. Review the available parameters for the API request.
Examples
Example 1: To list your available clusters
This example lists all of your available clusters in your default region.
$result = $client->listClusters([ ]);
Result syntax:
[ 'clusterArns' => [ 'arn:aws:ecs:us-east-1::cluster/test', 'arn:aws:ecs:us-east-1: :cluster/default', ], ]
ListContainerInstances
$result = $client->listContainerInstances
([/* ... */]); $promise = $client->listContainerInstancesAsync
([/* ... */]);
Returns a list of container instances in a specified cluster. You can filter the results of a ListContainerInstances
operation with cluster query language statements inside the filter
parameter. For more information, see Cluster Query Language in the Amazon Elastic Container Service Developer Guide.
Parameter Syntax
$result = $client->listContainerInstances([ 'cluster' => '<string>', 'filter' => '<string>', 'maxResults' => <integer>, 'nextToken' => '<string>', 'status' => 'ACTIVE|DRAINING|REGISTERING|DEREGISTERING|REGISTRATION_FAILED', ]);
Parameter Details
Members
- cluster
-
- Type: string
The short name or full Amazon Resource Name (ARN) of the cluster that hosts the container instances to list. If you do not specify a cluster, the default cluster is assumed.
- filter
-
- Type: string
You can filter the results of a
ListContainerInstances
operation with cluster query language statements. For more information, see Cluster Query Language in the Amazon Elastic Container Service Developer Guide. - maxResults
-
- Type: int
The maximum number of container instance results that
ListContainerInstances
returned in paginated output. When this parameter is used,ListContainerInstances
only returnsmaxResults
results in a single page along with anextToken
response element. The remaining results of the initial request can be seen by sending anotherListContainerInstances
request with the returnednextToken
value. This value can be between 1 and 100. If this parameter isn't used, thenListContainerInstances
returns up to 100 results and anextToken
value if applicable. - nextToken
-
- Type: string
The
nextToken
value returned from aListContainerInstances
request indicating that more results are available to fulfill the request and further calls are needed. IfmaxResults
was provided, it's possible the number of results to be fewer thanmaxResults
.This token should be treated as an opaque identifier that is only used to retrieve the next items in a list and not for other programmatic purposes.
- status
-
- Type: string
Filters the container instances by status. For example, if you specify the
DRAINING
status, the results include only container instances that have been set toDRAINING
using UpdateContainerInstancesState. If you don't specify this parameter, the default is to include container instances set to all states other thanINACTIVE
.
Result Syntax
[ 'containerInstanceArns' => ['<string>', ...], 'nextToken' => '<string>', ]
Result Details
Members
- containerInstanceArns
-
- Type: Array of strings
The list of container instances with full ARN entries for each container instance associated with the specified cluster.
- nextToken
-
- Type: string
The
nextToken
value to include in a futureListContainerInstances
request. When the results of aListContainerInstances
request exceedmaxResults
, this value can be used to retrieve the next page of results. This value isnull
when there are no more results to return.
Errors
- ServerException:
These errors are usually caused by a server issue.
- ClientException:
These errors are usually caused by a client action. This client action might be using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be specifying an identifier that isn't valid.
The following list includes additional causes for the error:
-
The
RunTask
could not be processed because you use managed scaling and there is a capacity error because the quota of tasks in thePROVISIONING
per cluster has been reached. For information about the service quotas, see Amazon ECS service quotas.
-
- InvalidParameterException:
The specified parameter isn't valid. Review the available parameters for the API request.
- ClusterNotFoundException:
The specified cluster wasn't found. You can view your available clusters with ListClusters. Amazon ECS clusters are Region specific.
Examples
Example 1: To list your available container instances in a cluster
This example lists all of your available container instances in the specified cluster in your default region.
$result = $client->listContainerInstances([ 'cluster' => 'default', ]);
Result syntax:
[ 'containerInstanceArns' => [ 'arn:aws:ecs:us-east-1::container-instance/default/f6bbb147-5370-4ace-8c73-c7181ded911f', 'arn:aws:ecs:us-east-1: :container-instance/default/ffe3d344-77e2-476c-a4d0-bf560ad50acb', ], ]
ListServiceDeployments
$result = $client->listServiceDeployments
([/* ... */]); $promise = $client->listServiceDeploymentsAsync
([/* ... */]);
This operation lists all the service deployments that meet the specified filter criteria.
A service deployment happens when you release a softwre update for the service. You route traffic from the running service revisions to the new service revison and control the number of running tasks.
This API returns the values that you use for the request parameters in DescribeServiceRevisions.
Parameter Syntax
$result = $client->listServiceDeployments([ 'cluster' => '<string>', 'createdAt' => [ 'after' => <integer || string || DateTime>, 'before' => <integer || string || DateTime>, ], 'maxResults' => <integer>, 'nextToken' => '<string>', 'service' => '<string>', // REQUIRED 'status' => ['<string>', ...], ]);
Parameter Details
Members
- cluster
-
- Type: string
The cluster that hosts the service. This can either be the cluster name or ARN. Starting April 15, 2023, Amazon Web Services will not onboard new customers to Amazon Elastic Inference (EI), and will help current customers migrate their workloads to options that offer better price and performanceIf you don't specify a cluster,
deault
is used. - createdAt
-
- Type: CreatedAt structure
An optional filter you can use to narrow the results by the service creation date. If you do not specify a value, the result includes all services created before the current time. The format is yyyy-MM-dd HH:mm:ss.SSSSSS.
- maxResults
-
- Type: int
The maximum number of service deployment results that
ListServiceDeployments
returned in paginated output. When this parameter is used,ListServiceDeployments
only returnsmaxResults
results in a single page along with anextToken
response element. The remaining results of the initial request can be seen by sending anotherListServiceDeployments
request with the returnednextToken
value. This value can be between 1 and 100. If this parameter isn't used, thenListServiceDeployments
returns up to 20 results and anextToken
value if applicable. - nextToken
-
- Type: string
The
nextToken
value returned from aListServiceDeployments
request indicating that more results are available to fulfill the request and further calls are needed. If you providedmaxResults
, it's possible the number of results is fewer thanmaxResults
. - service
-
- Required: Yes
- Type: string
The ARN or name of the service
- status
-
- Type: Array of strings
An optional filter you can use to narrow the results. If you do not specify a status, then all status values are included in the result.
Result Syntax
[ 'nextToken' => '<string>', 'serviceDeployments' => [ [ 'clusterArn' => '<string>', 'createdAt' => <DateTime>, 'finishedAt' => <DateTime>, 'serviceArn' => '<string>', 'serviceDeploymentArn' => '<string>', 'startedAt' => <DateTime>, 'status' => 'PENDING|SUCCESSFUL|STOPPED|STOP_REQUESTED|IN_PROGRESS|ROLLBACK_IN_PROGRESS|ROLLBACK_SUCCESSFUL|ROLLBACK_FAILED', 'statusReason' => '<string>', 'targetServiceRevisionArn' => '<string>', ], // ... ], ]
Result Details
Members
- nextToken
-
- Type: string
The
nextToken
value to include in a futureListServiceDeployments
request. When the results of aListServiceDeployments
request exceedmaxResults
, this value can be used to retrieve the next page of results. This value is null when there are no more results to return. - serviceDeployments
-
- Type: Array of ServiceDeploymentBrief structures
An overview of the service deployment, including the following properties:
-
The ARN of the service deployment.
-
The ARN of the service being deployed.
-
The ARN of the cluster that hosts the service in the service deployment.
-
The time that the service deployment started.
-
The time that the service deployment completed.
-
The service deployment status.
-
Information about why the service deployment is in the current state.
-
The ARN of the service revision that is being deployed.
Errors
- AccessDeniedException:
You don't have authorization to perform the requested action.
- ClientException:
These errors are usually caused by a client action. This client action might be using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be specifying an identifier that isn't valid.
The following list includes additional causes for the error:
-
The
RunTask
could not be processed because you use managed scaling and there is a capacity error because the quota of tasks in thePROVISIONING
per cluster has been reached. For information about the service quotas, see Amazon ECS service quotas.
-
- InvalidParameterException:
The specified parameter isn't valid. Review the available parameters for the API request.
- ServerException:
These errors are usually caused by a server issue.
- ServiceNotFoundException:
The specified service wasn't found. You can view your available services with ListServices. Amazon ECS services are cluster specific and Region specific.
- UnsupportedFeatureException:
The specified task isn't supported in this Region.
ListServices
$result = $client->listServices
([/* ... */]); $promise = $client->listServicesAsync
([/* ... */]);
Returns a list of services. You can filter the results by cluster, launch type, and scheduling strategy.
Parameter Syntax
$result = $client->listServices([ 'cluster' => '<string>', 'launchType' => 'EC2|FARGATE|EXTERNAL', 'maxResults' => <integer>, 'nextToken' => '<string>', 'schedulingStrategy' => 'REPLICA|DAEMON', ]);
Parameter Details
Members
- cluster
-
- Type: string
The short name or full Amazon Resource Name (ARN) of the cluster to use when filtering the
ListServices
results. If you do not specify a cluster, the default cluster is assumed. - launchType
-
- Type: string
The launch type to use when filtering the
ListServices
results. - maxResults
-
- Type: int
The maximum number of service results that
ListServices
returned in paginated output. When this parameter is used,ListServices
only returnsmaxResults
results in a single page along with anextToken
response element. The remaining results of the initial request can be seen by sending anotherListServices
request with the returnednextToken
value. This value can be between 1 and 100. If this parameter isn't used, thenListServices
returns up to 10 results and anextToken
value if applicable. - nextToken
-
- Type: string
The
nextToken
value returned from aListServices
request indicating that more results are available to fulfill the request and further calls will be needed. IfmaxResults
was provided, it is possible the number of results to be fewer thanmaxResults
.This token should be treated as an opaque identifier that is only used to retrieve the next items in a list and not for other programmatic purposes.
- schedulingStrategy
-
- Type: string
The scheduling strategy to use when filtering the
ListServices
results.
Result Syntax
[ 'nextToken' => '<string>', 'serviceArns' => ['<string>', ...], ]
Result Details
Members
- nextToken
-
- Type: string
The
nextToken
value to include in a futureListServices
request. When the results of aListServices
request exceedmaxResults
, this value can be used to retrieve the next page of results. This value isnull
when there are no more results to return. - serviceArns
-
- Type: Array of strings
The list of full ARN entries for each service that's associated with the specified cluster.
Errors
- ServerException:
These errors are usually caused by a server issue.
- ClientException:
These errors are usually caused by a client action. This client action might be using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be specifying an identifier that isn't valid.
The following list includes additional causes for the error:
-
The
RunTask
could not be processed because you use managed scaling and there is a capacity error because the quota of tasks in thePROVISIONING
per cluster has been reached. For information about the service quotas, see Amazon ECS service quotas.
-
- InvalidParameterException:
The specified parameter isn't valid. Review the available parameters for the API request.
- ClusterNotFoundException:
The specified cluster wasn't found. You can view your available clusters with ListClusters. Amazon ECS clusters are Region specific.
Examples
Example 1: To list the services in a cluster
This example lists the services running in the default cluster for an account.
$result = $client->listServices([ ]);
Result syntax:
[ 'serviceArns' => [ 'arn:aws:ecs:us-east-1:012345678910:service/default/my-http-service', ], ]
ListServicesByNamespace
$result = $client->listServicesByNamespace
([/* ... */]); $promise = $client->listServicesByNamespaceAsync
([/* ... */]);
This operation lists all of the services that are associated with a Cloud Map namespace. This list might include services in different clusters. In contrast, ListServices
can only list services in one cluster at a time. If you need to filter the list of services in a single cluster by various parameters, use ListServices
. For more information, see Service Connect in the Amazon Elastic Container Service Developer Guide.
Parameter Syntax
$result = $client->listServicesByNamespace([ 'maxResults' => <integer>, 'namespace' => '<string>', // REQUIRED 'nextToken' => '<string>', ]);
Parameter Details
Members
- maxResults
-
- Type: int
The maximum number of service results that
ListServicesByNamespace
returns in paginated output. When this parameter is used,ListServicesByNamespace
only returnsmaxResults
results in a single page along with anextToken
response element. The remaining results of the initial request can be seen by sending anotherListServicesByNamespace
request with the returnednextToken
value. This value can be between 1 and 100. If this parameter isn't used, thenListServicesByNamespace
returns up to 10 results and anextToken
value if applicable. - namespace
-
- Required: Yes
- Type: string
The namespace name or full Amazon Resource Name (ARN) of the Cloud Map namespace to list the services in.
Tasks that run in a namespace can use short names to connect to services in the namespace. Tasks can connect to services across all of the clusters in the namespace. Tasks connect through a managed proxy container that collects logs and metrics for increased visibility. Only the tasks that Amazon ECS services create are supported with Service Connect. For more information, see Service Connect in the Amazon Elastic Container Service Developer Guide.
- nextToken
-
- Type: string
The
nextToken
value that's returned from aListServicesByNamespace
request. It indicates that more results are available to fulfill the request and further calls are needed. IfmaxResults
is returned, it is possible the number of results is less thanmaxResults
.
Result Syntax
[ 'nextToken' => '<string>', 'serviceArns' => ['<string>', ...], ]
Result Details
Members
- nextToken
-
- Type: string
The
nextToken
value to include in a futureListServicesByNamespace
request. When the results of aListServicesByNamespace
request exceedmaxResults
, this value can be used to retrieve the next page of results. When there are no more results to return, this value isnull
. - serviceArns
-
- Type: Array of strings
The list of full ARN entries for each service that's associated with the specified namespace.
Errors
- ServerException:
These errors are usually caused by a server issue.
- ClientException:
These errors are usually caused by a client action. This client action might be using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be specifying an identifier that isn't valid.
The following list includes additional causes for the error:
-
The
RunTask
could not be processed because you use managed scaling and there is a capacity error because the quota of tasks in thePROVISIONING
per cluster has been reached. For information about the service quotas, see Amazon ECS service quotas.
-
- InvalidParameterException:
The specified parameter isn't valid. Review the available parameters for the API request.
- NamespaceNotFoundException:
The specified namespace wasn't found.
ListTagsForResource
$result = $client->listTagsForResource
([/* ... */]); $promise = $client->listTagsForResourceAsync
([/* ... */]);
List the tags for an Amazon ECS resource.
Parameter Syntax
$result = $client->listTagsForResource([ 'resourceArn' => '<string>', // REQUIRED ]);
Parameter Details
Members
- resourceArn
-
- Required: Yes
- Type: string
The Amazon Resource Name (ARN) that identifies the resource to list the tags for. Currently, the supported resources are Amazon ECS tasks, services, task definitions, clusters, and container instances.
Result Syntax
[ 'tags' => [ [ 'key' => '<string>', 'value' => '<string>', ], // ... ], ]
Result Details
Members
- tags
-
- Type: Array of Tag structures
The tags for the resource.
Errors
- ServerException:
These errors are usually caused by a server issue.
- ClientException:
These errors are usually caused by a client action. This client action might be using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be specifying an identifier that isn't valid.
The following list includes additional causes for the error:
-
The
RunTask
could not be processed because you use managed scaling and there is a capacity error because the quota of tasks in thePROVISIONING
per cluster has been reached. For information about the service quotas, see Amazon ECS service quotas.
-
- ClusterNotFoundException:
The specified cluster wasn't found. You can view your available clusters with ListClusters. Amazon ECS clusters are Region specific.
- InvalidParameterException:
The specified parameter isn't valid. Review the available parameters for the API request.
Examples
Example 1: To list the tags for a cluster.
This example lists the tags for the 'dev' cluster.
$result = $client->listTagsForResource([ 'resourceArn' => 'arn:aws:ecs:region:aws_account_id:cluster/dev', ]);
Result syntax:
[ 'tags' => [ [ 'key' => 'team', 'value' => 'dev', ], ], ]
ListTaskDefinitionFamilies
$result = $client->listTaskDefinitionFamilies
([/* ... */]); $promise = $client->listTaskDefinitionFamiliesAsync
([/* ... */]);
Returns a list of task definition families that are registered to your account. This list includes task definition families that no longer have any ACTIVE
task definition revisions.
You can filter out task definition families that don't contain any ACTIVE
task definition revisions by setting the status
parameter to ACTIVE
. You can also filter the results with the familyPrefix
parameter.
Parameter Syntax
$result = $client->listTaskDefinitionFamilies([ 'familyPrefix' => '<string>', 'maxResults' => <integer>, 'nextToken' => '<string>', 'status' => 'ACTIVE|INACTIVE|ALL', ]);
Parameter Details
Members
- familyPrefix
-
- Type: string
The
familyPrefix
is a string that's used to filter the results ofListTaskDefinitionFamilies
. If you specify afamilyPrefix
, only task definition family names that begin with thefamilyPrefix
string are returned. - maxResults
-
- Type: int
The maximum number of task definition family results that
ListTaskDefinitionFamilies
returned in paginated output. When this parameter is used,ListTaskDefinitions
only returnsmaxResults
results in a single page along with anextToken
response element. The remaining results of the initial request can be seen by sending anotherListTaskDefinitionFamilies
request with the returnednextToken
value. This value can be between 1 and 100. If this parameter isn't used, thenListTaskDefinitionFamilies
returns up to 100 results and anextToken
value if applicable. - nextToken
-
- Type: string
The
nextToken
value returned from aListTaskDefinitionFamilies
request indicating that more results are available to fulfill the request and further calls will be needed. IfmaxResults
was provided, it is possible the number of results to be fewer thanmaxResults
.This token should be treated as an opaque identifier that is only used to retrieve the next items in a list and not for other programmatic purposes.
- status
-
- Type: string
The task definition family status to filter the
ListTaskDefinitionFamilies
results with. By default, bothACTIVE
andINACTIVE
task definition families are listed. If this parameter is set toACTIVE
, only task definition families that have anACTIVE
task definition revision are returned. If this parameter is set toINACTIVE
, only task definition families that do not have anyACTIVE
task definition revisions are returned. If you paginate the resulting output, be sure to keep thestatus
value constant in each subsequent request.
Result Syntax
[ 'families' => ['<string>', ...], 'nextToken' => '<string>', ]
Result Details
Members
- families
-
- Type: Array of strings
The list of task definition family names that match the
ListTaskDefinitionFamilies
request. - nextToken
-
- Type: string
The
nextToken
value to include in a futureListTaskDefinitionFamilies
request. When the results of aListTaskDefinitionFamilies
request exceedmaxResults
, this value can be used to retrieve the next page of results. This value isnull
when there are no more results to return.
Errors
- ServerException:
These errors are usually caused by a server issue.
- ClientException:
These errors are usually caused by a client action. This client action might be using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be specifying an identifier that isn't valid.
The following list includes additional causes for the error:
-
The
RunTask
could not be processed because you use managed scaling and there is a capacity error because the quota of tasks in thePROVISIONING
per cluster has been reached. For information about the service quotas, see Amazon ECS service quotas.
-
- InvalidParameterException:
The specified parameter isn't valid. Review the available parameters for the API request.
Examples
Example 1: To list your registered task definition families
This example lists all of your registered task definition families.
$result = $client->listTaskDefinitionFamilies([ ]);
Result syntax:
[ 'families' => [ 'node-js-app', 'web-timer', 'hpcc', 'hpcc-c4-8xlarge', ], ]
Example 2: To filter your registered task definition families
This example lists the task definition revisions that start with "hpcc".
$result = $client->listTaskDefinitionFamilies([ 'familyPrefix' => 'hpcc', ]);
Result syntax:
[ 'families' => [ 'hpcc', 'hpcc-c4-8xlarge', ], ]
ListTaskDefinitions
$result = $client->listTaskDefinitions
([/* ... */]); $promise = $client->listTaskDefinitionsAsync
([/* ... */]);
Returns a list of task definitions that are registered to your account. You can filter the results by family name with the familyPrefix
parameter or by status with the status
parameter.
Parameter Syntax
$result = $client->listTaskDefinitions([ 'familyPrefix' => '<string>', 'maxResults' => <integer>, 'nextToken' => '<string>', 'sort' => 'ASC|DESC', 'status' => 'ACTIVE|INACTIVE|DELETE_IN_PROGRESS', ]);
Parameter Details
Members
- familyPrefix
-
- Type: string
The full family name to filter the
ListTaskDefinitions
results with. Specifying afamilyPrefix
limits the listed task definitions to task definition revisions that belong to that family. - maxResults
-
- Type: int
The maximum number of task definition results that
ListTaskDefinitions
returned in paginated output. When this parameter is used,ListTaskDefinitions
only returnsmaxResults
results in a single page along with anextToken
response element. The remaining results of the initial request can be seen by sending anotherListTaskDefinitions
request with the returnednextToken
value. This value can be between 1 and 100. If this parameter isn't used, thenListTaskDefinitions
returns up to 100 results and anextToken
value if applicable. - nextToken
-
- Type: string
The
nextToken
value returned from aListTaskDefinitions
request indicating that more results are available to fulfill the request and further calls will be needed. IfmaxResults
was provided, it is possible the number of results to be fewer thanmaxResults
.This token should be treated as an opaque identifier that is only used to retrieve the next items in a list and not for other programmatic purposes.
- sort
-
- Type: string
The order to sort the results in. Valid values are
ASC
andDESC
. By default, (ASC
) task definitions are listed lexicographically by family name and in ascending numerical order by revision so that the newest task definitions in a family are listed last. Setting this parameter toDESC
reverses the sort order on family name and revision. This is so that the newest task definitions in a family are listed first. - status
-
- Type: string
The task definition status to filter the
ListTaskDefinitions
results with. By default, onlyACTIVE
task definitions are listed. By setting this parameter toINACTIVE
, you can view task definitions that areINACTIVE
as long as an active task or service still references them. If you paginate the resulting output, be sure to keep thestatus
value constant in each subsequent request.
Result Syntax
[ 'nextToken' => '<string>', 'taskDefinitionArns' => ['<string>', ...], ]
Result Details
Members
- nextToken
-
- Type: string
The
nextToken
value to include in a futureListTaskDefinitions
request. When the results of aListTaskDefinitions
request exceedmaxResults
, this value can be used to retrieve the next page of results. This value isnull
when there are no more results to return. - taskDefinitionArns
-
- Type: Array of strings
The list of task definition Amazon Resource Name (ARN) entries for the
ListTaskDefinitions
request.
Errors
- ServerException:
These errors are usually caused by a server issue.
- ClientException:
These errors are usually caused by a client action. This client action might be using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be specifying an identifier that isn't valid.
The following list includes additional causes for the error:
-
The
RunTask
could not be processed because you use managed scaling and there is a capacity error because the quota of tasks in thePROVISIONING
per cluster has been reached. For information about the service quotas, see Amazon ECS service quotas.
-
- InvalidParameterException:
The specified parameter isn't valid. Review the available parameters for the API request.
Examples
Example 1: To list your registered task definitions
This example lists all of your registered task definitions.
$result = $client->listTaskDefinitions([ ]);
Result syntax:
[ 'taskDefinitionArns' => [ 'arn:aws:ecs:us-east-1::task-definition/sleep300:2', 'arn:aws:ecs:us-east-1: :task-definition/sleep360:1', 'arn:aws:ecs:us-east-1: :task-definition/wordpress:3', 'arn:aws:ecs:us-east-1: :task-definition/wordpress:4', 'arn:aws:ecs:us-east-1: :task-definition/wordpress:5', 'arn:aws:ecs:us-east-1: :task-definition/wordpress:6', ], ]
Example 2: To list the registered task definitions in a family
This example lists the task definition revisions of a specified family.
$result = $client->listTaskDefinitions([ 'familyPrefix' => 'wordpress', ]);
Result syntax:
[ 'taskDefinitionArns' => [ 'arn:aws:ecs:us-east-1::task-definition/wordpress:3', 'arn:aws:ecs:us-east-1: :task-definition/wordpress:4', 'arn:aws:ecs:us-east-1: :task-definition/wordpress:5', 'arn:aws:ecs:us-east-1: :task-definition/wordpress:6', ], ]
ListTasks
$result = $client->listTasks
([/* ... */]); $promise = $client->listTasksAsync
([/* ... */]);
Returns a list of tasks. You can filter the results by cluster, task definition family, container instance, launch type, what IAM principal started the task, or by the desired status of the task.
Recently stopped tasks might appear in the returned results.
Parameter Syntax
$result = $client->listTasks([ 'cluster' => '<string>', 'containerInstance' => '<string>', 'desiredStatus' => 'RUNNING|PENDING|STOPPED', 'family' => '<string>', 'launchType' => 'EC2|FARGATE|EXTERNAL', 'maxResults' => <integer>, 'nextToken' => '<string>', 'serviceName' => '<string>', 'startedBy' => '<string>', ]);
Parameter Details
Members
- cluster
-
- Type: string
The short name or full Amazon Resource Name (ARN) of the cluster to use when filtering the
ListTasks
results. If you do not specify a cluster, the default cluster is assumed. - containerInstance
-
- Type: string
The container instance ID or full ARN of the container instance to use when filtering the
ListTasks
results. Specifying acontainerInstance
limits the results to tasks that belong to that container instance. - desiredStatus
-
- Type: string
The task desired status to use when filtering the
ListTasks
results. Specifying adesiredStatus
ofSTOPPED
limits the results to tasks that Amazon ECS has set the desired status toSTOPPED
. This can be useful for debugging tasks that aren't starting properly or have died or finished. The default status filter isRUNNING
, which shows tasks that Amazon ECS has set the desired status toRUNNING
.Although you can filter results based on a desired status of
PENDING
, this doesn't return any results. Amazon ECS never sets the desired status of a task to that value (only a task'slastStatus
may have a value ofPENDING
). - family
-
- Type: string
The name of the task definition family to use when filtering the
ListTasks
results. Specifying afamily
limits the results to tasks that belong to that family. - launchType
-
- Type: string
The launch type to use when filtering the
ListTasks
results. - maxResults
-
- Type: int
The maximum number of task results that
ListTasks
returned in paginated output. When this parameter is used,ListTasks
only returnsmaxResults
results in a single page along with anextToken
response element. The remaining results of the initial request can be seen by sending anotherListTasks
request with the returnednextToken
value. This value can be between 1 and 100. If this parameter isn't used, thenListTasks
returns up to 100 results and anextToken
value if applicable. - nextToken
-
- Type: string
The
nextToken
value returned from aListTasks
request indicating that more results are available to fulfill the request and further calls will be needed. IfmaxResults
was provided, it's possible the number of results to be fewer thanmaxResults
.This token should be treated as an opaque identifier that is only used to retrieve the next items in a list and not for other programmatic purposes.
- serviceName
-
- Type: string
The name of the service to use when filtering the
ListTasks
results. Specifying aserviceName
limits the results to tasks that belong to that service. - startedBy
-
- Type: string
The
startedBy
value to filter the task results with. Specifying astartedBy
value limits the results to tasks that were started with that value.When you specify
startedBy
as the filter, it must be the only filter that you use.
Result Syntax
[ 'nextToken' => '<string>', 'taskArns' => ['<string>', ...], ]
Result Details
Members
- nextToken
-
- Type: string
The
nextToken
value to include in a futureListTasks
request. When the results of aListTasks
request exceedmaxResults
, this value can be used to retrieve the next page of results. This value isnull
when there are no more results to return. - taskArns
-
- Type: Array of strings
The list of task ARN entries for the
ListTasks
request.
Errors
- ServerException:
These errors are usually caused by a server issue.
- ClientException:
These errors are usually caused by a client action. This client action might be using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be specifying an identifier that isn't valid.
The following list includes additional causes for the error:
-
The
RunTask
could not be processed because you use managed scaling and there is a capacity error because the quota of tasks in thePROVISIONING
per cluster has been reached. For information about the service quotas, see Amazon ECS service quotas.
-
- InvalidParameterException:
The specified parameter isn't valid. Review the available parameters for the API request.
- ClusterNotFoundException:
The specified cluster wasn't found. You can view your available clusters with ListClusters. Amazon ECS clusters are Region specific.
- ServiceNotFoundException:
The specified service wasn't found. You can view your available services with ListServices. Amazon ECS services are cluster specific and Region specific.
Examples
Example 1: To list the tasks in a cluster
This example lists all of the tasks in a cluster.
$result = $client->listTasks([ 'cluster' => 'default', ]);
Result syntax:
[ 'taskArns' => [ 'arn:aws:ecs:us-east-1:012345678910:task/default/0cc43cdb-3bee-4407-9c26-c0e6ea5bee84', 'arn:aws:ecs:us-east-1:012345678910:task/default/6b809ef6-c67e-4467-921f-ee261c15a0a1', ], ]
Example 2: To list the tasks on a particular container instance
This example lists the tasks of a specified container instance. Specifying a ``containerInstance`` value limits the results to tasks that belong to that container instance.
$result = $client->listTasks([ 'cluster' => 'default', 'containerInstance' => 'f6bbb147-5370-4ace-8c73-c7181ded911f', ]);
Result syntax:
[ 'taskArns' => [ 'arn:aws:ecs:us-east-1:012345678910:task/default/0cc43cdb-3bee-4407-9c26-c0e6ea5bee84', ], ]
PutAccountSetting
$result = $client->putAccountSetting
([/* ... */]); $promise = $client->putAccountSettingAsync
([/* ... */]);
Modifies an account setting. Account settings are set on a per-Region basis.
If you change the root user account setting, the default settings are reset for users and roles that do not have specified individual account settings. For more information, see Account Settings in the Amazon Elastic Container Service Developer Guide.
Parameter Syntax
$result = $client->putAccountSetting([ 'name' => 'serviceLongArnFormat|taskLongArnFormat|containerInstanceLongArnFormat|awsvpcTrunking|containerInsights|fargateFIPSMode|tagResourceAuthorization|fargateTaskRetirementWaitPeriod|guardDutyActivate', // REQUIRED 'principalArn' => '<string>', 'value' => '<string>', // REQUIRED ]);
Parameter Details
Members
- name
-
- Required: Yes
- Type: string
The Amazon ECS account setting name to modify.
The following are the valid values for the account setting name.
-
serviceLongArnFormat
- When modified, the Amazon Resource Name (ARN) and resource ID format of the resource type for a specified user, role, or the root user for an account is affected. The opt-in and opt-out account setting must be set for each Amazon ECS resource separately. The ARN and resource ID format of a resource is defined by the opt-in status of the user or role that created the resource. You must turn on this setting to use Amazon ECS features such as resource tagging. -
taskLongArnFormat
- When modified, the Amazon Resource Name (ARN) and resource ID format of the resource type for a specified user, role, or the root user for an account is affected. The opt-in and opt-out account setting must be set for each Amazon ECS resource separately. The ARN and resource ID format of a resource is defined by the opt-in status of the user or role that created the resource. You must turn on this setting to use Amazon ECS features such as resource tagging. -
containerInstanceLongArnFormat
- When modified, the Amazon Resource Name (ARN) and resource ID format of the resource type for a specified user, role, or the root user for an account is affected. The opt-in and opt-out account setting must be set for each Amazon ECS resource separately. The ARN and resource ID format of a resource is defined by the opt-in status of the user or role that created the resource. You must turn on this setting to use Amazon ECS features such as resource tagging. -
awsvpcTrunking
- When modified, the elastic network interface (ENI) limit for any new container instances that support the feature is changed. IfawsvpcTrunking
is turned on, any new container instances that support the feature are launched have the increased ENI limits available to them. For more information, see Elastic Network Interface Trunking in the Amazon Elastic Container Service Developer Guide. -
containerInsights
- When modified, the default setting indicating whether Amazon Web Services CloudWatch Container Insights is turned on for your clusters is changed. IfcontainerInsights
is turned on, any new clusters that are created will have Container Insights turned on unless you disable it during cluster creation. For more information, see CloudWatch Container Insights in the Amazon Elastic Container Service Developer Guide. -
dualStackIPv6
- When turned on, when using a VPC in dual stack mode, your tasks using theawsvpc
network mode can have an IPv6 address assigned. For more information on using IPv6 with tasks launched on Amazon EC2 instances, see Using a VPC in dual-stack mode. For more information on using IPv6 with tasks launched on Fargate, see Using a VPC in dual-stack mode. -
fargateTaskRetirementWaitPeriod
- When Amazon Web Services determines that a security or infrastructure update is needed for an Amazon ECS task hosted on Fargate, the tasks need to be stopped and new tasks launched to replace them. UsefargateTaskRetirementWaitPeriod
to configure the wait time to retire a Fargate task. For information about the Fargate tasks maintenance, see Amazon Web Services Fargate task maintenance in the Amazon ECS Developer Guide. -
tagResourceAuthorization
- Amazon ECS is introducing tagging authorization for resource creation. Users must have permissions for actions that create the resource, such asecsCreateCluster
. If tags are specified when you create a resource, Amazon Web Services performs additional authorization to verify if users or roles have permissions to create tags. Therefore, you must grant explicit permissions to use theecs:TagResource
action. For more information, see Grant permission to tag resources on creation in the Amazon ECS Developer Guide. -
guardDutyActivate
- TheguardDutyActivate
parameter is read-only in Amazon ECS and indicates whether Amazon ECS Runtime Monitoring is enabled or disabled by your security administrator in your Amazon ECS account. Amazon GuardDuty controls this account setting on your behalf. For more information, see Protecting Amazon ECS workloads with Amazon ECS Runtime Monitoring.
- principalArn
-
- Type: string
The ARN of the principal, which can be a user, role, or the root user. If you specify the root user, it modifies the account setting for all users, roles, and the root user of the account unless a user or role explicitly overrides these settings. If this field is omitted, the setting is changed only for the authenticated user.
You must use the root user when you set the Fargate wait time (
fargateTaskRetirementWaitPeriod
).Federated users assume the account setting of the root user and can't have explicit account settings set for them.
- value
-
- Required: Yes
- Type: string
The account setting value for the specified principal ARN. Accepted values are
enabled
,disabled
,on
, andoff
.When you specify
fargateTaskRetirementWaitPeriod
for thename
, the following are the valid values:-
0
- Amazon Web Services sends the notification, and immediately retires the affected tasks. -
7
- Amazon Web Services sends the notification, and waits 7 calendar days to retire the tasks. -
14
- Amazon Web Services sends the notification, and waits 14 calendar days to retire the tasks.
Result Syntax
[ 'setting' => [ 'name' => 'serviceLongArnFormat|taskLongArnFormat|containerInstanceLongArnFormat|awsvpcTrunking|containerInsights|fargateFIPSMode|tagResourceAuthorization|fargateTaskRetirementWaitPeriod|guardDutyActivate', 'principalArn' => '<string>', 'type' => 'user|aws_managed', 'value' => '<string>', ], ]
Result Details
Members
- setting
-
- Type: Setting structure
The current account setting for a resource.
Errors
- ServerException:
These errors are usually caused by a server issue.
- ClientException:
These errors are usually caused by a client action. This client action might be using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be specifying an identifier that isn't valid.
The following list includes additional causes for the error:
-
The
RunTask
could not be processed because you use managed scaling and there is a capacity error because the quota of tasks in thePROVISIONING
per cluster has been reached. For information about the service quotas, see Amazon ECS service quotas.
-
- InvalidParameterException:
The specified parameter isn't valid. Review the available parameters for the API request.
Examples
Example 1: To modify your account settings
This example modifies your account settings to opt in to the new ARN and resource ID format for Amazon ECS services. If you’re using this command as the root user, then changes apply to the entire AWS account, unless an IAM user or role explicitly overrides these settings for themselves.
$result = $client->putAccountSetting([ 'name' => 'serviceLongArnFormat', 'value' => 'enabled', ]);
Result syntax:
[ 'setting' => [ 'name' => 'serviceLongArnFormat', 'value' => 'enabled', 'principalArn' => 'arn:aws:iam:::user/principalName', ], ]
Example 2: To modify the account settings for a specific IAM user or IAM role
This example modifies the account setting for a specific IAM user or IAM role to opt in to the new ARN and resource ID format for Amazon ECS container instances. If you’re using this command as the root user, then changes apply to the entire AWS account, unless an IAM user or role explicitly overrides these settings for themselves.
$result = $client->putAccountSetting([ 'name' => 'containerInstanceLongArnFormat', 'value' => 'enabled', 'principalArn' => 'arn:aws:iam:::user/principalName', ]);
Result syntax:
[ 'setting' => [ 'name' => 'containerInstanceLongArnFormat', 'value' => 'enabled', 'principalArn' => 'arn:aws:iam:::user/principalName', ], ]
PutAccountSettingDefault
$result = $client->putAccountSettingDefault
([/* ... */]); $promise = $client->putAccountSettingDefaultAsync
([/* ... */]);
Modifies an account setting for all users on an account for whom no individual account setting has been specified. Account settings are set on a per-Region basis.
Parameter Syntax
$result = $client->putAccountSettingDefault([ 'name' => 'serviceLongArnFormat|taskLongArnFormat|containerInstanceLongArnFormat|awsvpcTrunking|containerInsights|fargateFIPSMode|tagResourceAuthorization|fargateTaskRetirementWaitPeriod|guardDutyActivate', // REQUIRED 'value' => '<string>', // REQUIRED ]);
Parameter Details
Members
- name
-
- Required: Yes
- Type: string
The resource name for which to modify the account setting.
The following are the valid values for the account setting name.
-
serviceLongArnFormat
- When modified, the Amazon Resource Name (ARN) and resource ID format of the resource type for a specified user, role, or the root user for an account is affected. The opt-in and opt-out account setting must be set for each Amazon ECS resource separately. The ARN and resource ID format of a resource is defined by the opt-in status of the user or role that created the resource. You must turn on this setting to use Amazon ECS features such as resource tagging. -
taskLongArnFormat
- When modified, the Amazon Resource Name (ARN) and resource ID format of the resource type for a specified user, role, or the root user for an account is affected. The opt-in and opt-out account setting must be set for each Amazon ECS resource separately. The ARN and resource ID format of a resource is defined by the opt-in status of the user or role that created the resource. You must turn on this setting to use Amazon ECS features such as resource tagging. -
containerInstanceLongArnFormat
- When modified, the Amazon Resource Name (ARN) and resource ID format of the resource type for a specified user, role, or the root user for an account is affected. The opt-in and opt-out account setting must be set for each Amazon ECS resource separately. The ARN and resource ID format of a resource is defined by the opt-in status of the user or role that created the resource. You must turn on this setting to use Amazon ECS features such as resource tagging. -
awsvpcTrunking
- When modified, the elastic network interface (ENI) limit for any new container instances that support the feature is changed. IfawsvpcTrunking
is turned on, any new container instances that support the feature are launched have the increased ENI limits available to them. For more information, see Elastic Network Interface Trunking in the Amazon Elastic Container Service Developer Guide. -
containerInsights
- When modified, the default setting indicating whether Amazon Web Services CloudWatch Container Insights is turned on for your clusters is changed. IfcontainerInsights
is turned on, any new clusters that are created will have Container Insights turned on unless you disable it during cluster creation. For more information, see CloudWatch Container Insights in the Amazon Elastic Container Service Developer Guide. -
dualStackIPv6
- When turned on, when using a VPC in dual stack mode, your tasks using theawsvpc
network mode can have an IPv6 address assigned. For more information on using IPv6 with tasks launched on Amazon EC2 instances, see Using a VPC in dual-stack mode. For more information on using IPv6 with tasks launched on Fargate, see Using a VPC in dual-stack mode. -
fargateFIPSMode
- If you specifyfargateFIPSMode
, Fargate FIPS 140 compliance is affected. -
fargateTaskRetirementWaitPeriod
- When Amazon Web Services determines that a security or infrastructure update is needed for an Amazon ECS task hosted on Fargate, the tasks need to be stopped and new tasks launched to replace them. UsefargateTaskRetirementWaitPeriod
to configure the wait time to retire a Fargate task. For information about the Fargate tasks maintenance, see Amazon Web Services Fargate task maintenance in the Amazon ECS Developer Guide. -
tagResourceAuthorization
- Amazon ECS is introducing tagging authorization for resource creation. Users must have permissions for actions that create the resource, such asecsCreateCluster
. If tags are specified when you create a resource, Amazon Web Services performs additional authorization to verify if users or roles have permissions to create tags. Therefore, you must grant explicit permissions to use theecs:TagResource
action. For more information, see Grant permission to tag resources on creation in the Amazon ECS Developer Guide. -
guardDutyActivate
- TheguardDutyActivate
parameter is read-only in Amazon ECS and indicates whether Amazon ECS Runtime Monitoring is enabled or disabled by your security administrator in your Amazon ECS account. Amazon GuardDuty controls this account setting on your behalf. For more information, see Protecting Amazon ECS workloads with Amazon ECS Runtime Monitoring.
- value
-
- Required: Yes
- Type: string
The account setting value for the specified principal ARN. Accepted values are
enabled
,disabled
,on
, andoff
.When you specify
fargateTaskRetirementWaitPeriod
for thename
, the following are the valid values:-
0
- Amazon Web Services sends the notification, and immediately retires the affected tasks. -
7
- Amazon Web Services sends the notification, and waits 7 calendar days to retire the tasks. -
14
- Amazon Web Services sends the notification, and waits 14 calendar days to retire the tasks.
Result Syntax
[ 'setting' => [ 'name' => 'serviceLongArnFormat|taskLongArnFormat|containerInstanceLongArnFormat|awsvpcTrunking|containerInsights|fargateFIPSMode|tagResourceAuthorization|fargateTaskRetirementWaitPeriod|guardDutyActivate', 'principalArn' => '<string>', 'type' => 'user|aws_managed', 'value' => '<string>', ], ]
Result Details
Members
- setting
-
- Type: Setting structure
The current setting for a resource.
Errors
- ServerException:
These errors are usually caused by a server issue.
- ClientException:
These errors are usually caused by a client action. This client action might be using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be specifying an identifier that isn't valid.
The following list includes additional causes for the error:
-
The
RunTask
could not be processed because you use managed scaling and there is a capacity error because the quota of tasks in thePROVISIONING
per cluster has been reached. For information about the service quotas, see Amazon ECS service quotas.
-
- InvalidParameterException:
The specified parameter isn't valid. Review the available parameters for the API request.
Examples
Example 1: To modify the default account settings for all IAM users or roles on an account
This example modifies the default account setting for the specified resource for all IAM users or roles on an account. These changes apply to the entire AWS account, unless an IAM user or role explicitly overrides these settings for themselves.
$result = $client->putAccountSettingDefault([ 'name' => 'serviceLongArnFormat', 'value' => 'enabled', ]);
Result syntax:
[ 'setting' => [ 'name' => 'serviceLongArnFormat', 'value' => 'enabled', 'principalArn' => 'arn:aws:iam:::root', ], ]
PutAttributes
$result = $client->putAttributes
([/* ... */]); $promise = $client->putAttributesAsync
([/* ... */]);
Create or update an attribute on an Amazon ECS resource. If the attribute doesn't exist, it's created. If the attribute exists, its value is replaced with the specified value. To delete an attribute, use DeleteAttributes. For more information, see Attributes in the Amazon Elastic Container Service Developer Guide.
Parameter Syntax
$result = $client->putAttributes([ 'attributes' => [ // REQUIRED [ 'name' => '<string>', // REQUIRED 'targetId' => '<string>', 'targetType' => 'container-instance', 'value' => '<string>', ], // ... ], 'cluster' => '<string>', ]);
Parameter Details
Members
- attributes
-
- Required: Yes
- Type: Array of Attribute structures
The attributes to apply to your resource. You can specify up to 10 custom attributes for each resource. You can specify up to 10 attributes in a single call.
- cluster
-
- Type: string
The short name or full Amazon Resource Name (ARN) of the cluster that contains the resource to apply attributes. If you do not specify a cluster, the default cluster is assumed.
Result Syntax
[ 'attributes' => [ [ 'name' => '<string>', 'targetId' => '<string>', 'targetType' => 'container-instance', 'value' => '<string>', ], // ... ], ]
Result Details
Members
- attributes
-
- Type: Array of Attribute structures
The attributes applied to your resource.
Errors
- ClusterNotFoundException:
The specified cluster wasn't found. You can view your available clusters with ListClusters. Amazon ECS clusters are Region specific.
- TargetNotFoundException:
The specified target wasn't found. You can view your available container instances with ListContainerInstances. Amazon ECS container instances are cluster-specific and Region-specific.
- AttributeLimitExceededException:
You can apply up to 10 custom attributes for each resource. You can view the attributes of a resource with ListAttributes. You can remove existing attributes on a resource with DeleteAttributes.
- InvalidParameterException:
The specified parameter isn't valid. Review the available parameters for the API request.
PutClusterCapacityProviders
$result = $client->putClusterCapacityProviders
([/* ... */]); $promise = $client->putClusterCapacityProvidersAsync
([/* ... */]);
Modifies the available capacity providers and the default capacity provider strategy for a cluster.
You must specify both the available capacity providers and a default capacity provider strategy for the cluster. If the specified cluster has existing capacity providers associated with it, you must specify all existing capacity providers in addition to any new ones you want to add. Any existing capacity providers that are associated with a cluster that are omitted from a PutClusterCapacityProviders API call will be disassociated with the cluster. You can only disassociate an existing capacity provider from a cluster if it's not being used by any existing tasks.
When creating a service or running a task on a cluster, if no capacity provider or launch type is specified, then the cluster's default capacity provider strategy is used. We recommend that you define a default capacity provider strategy for your cluster. However, you must specify an empty array ([]
) to bypass defining a default strategy.
Parameter Syntax
$result = $client->putClusterCapacityProviders([ 'capacityProviders' => ['<string>', ...], // REQUIRED 'cluster' => '<string>', // REQUIRED 'defaultCapacityProviderStrategy' => [ // REQUIRED [ 'base' => <integer>, 'capacityProvider' => '<string>', // REQUIRED 'weight' => <integer>, ], // ... ], ]);
Parameter Details
Members
- capacityProviders
-
- Required: Yes
- Type: Array of strings
The name of one or more capacity providers to associate with the cluster.
If specifying a capacity provider that uses an Auto Scaling group, the capacity provider must already be created. New capacity providers can be created with the CreateCapacityProvider API operation.
To use a Fargate capacity provider, specify either the
FARGATE
orFARGATE_SPOT
capacity providers. The Fargate capacity providers are available to all accounts and only need to be associated with a cluster to be used. - cluster
-
- Required: Yes
- Type: string
The short name or full Amazon Resource Name (ARN) of the cluster to modify the capacity provider settings for. If you don't specify a cluster, the default cluster is assumed.
- defaultCapacityProviderStrategy
-
- Required: Yes
- Type: Array of CapacityProviderStrategyItem structures
The capacity provider strategy to use by default for the cluster.
When creating a service or running a task on a cluster, if no capacity provider or launch type is specified then the default capacity provider strategy for the cluster is used.
A capacity provider strategy consists of one or more capacity providers along with the
base
andweight
to assign to them. A capacity provider must be associated with the cluster to be used in a capacity provider strategy. The PutClusterCapacityProviders API is used to associate a capacity provider with a cluster. Only capacity providers with anACTIVE
orUPDATING
status can be used.If specifying a capacity provider that uses an Auto Scaling group, the capacity provider must already be created. New capacity providers can be created with the CreateCapacityProvider API operation.
To use a Fargate capacity provider, specify either the
FARGATE
orFARGATE_SPOT
capacity providers. The Fargate capacity providers are available to all accounts and only need to be associated with a cluster to be used.
Result Syntax
[ 'cluster' => [ 'activeServicesCount' => <integer>, 'attachments' => [ [ 'details' => [ [ 'name' => '<string>', 'value' => '<string>', ], // ... ], 'id' => '<string>', 'status' => '<string>', 'type' => '<string>', ], // ... ], 'attachmentsStatus' => '<string>', 'capacityProviders' => ['<string>', ...], 'clusterArn' => '<string>', 'clusterName' => '<string>', 'configuration' => [ 'executeCommandConfiguration' => [ 'kmsKeyId' => '<string>', 'logConfiguration' => [ 'cloudWatchEncryptionEnabled' => true || false, 'cloudWatchLogGroupName' => '<string>', 's3BucketName' => '<string>', 's3EncryptionEnabled' => true || false, 's3KeyPrefix' => '<string>', ], 'logging' => 'NONE|DEFAULT|OVERRIDE', ], 'managedStorageConfiguration' => [ 'fargateEphemeralStorageKmsKeyId' => '<string>', 'kmsKeyId' => '<string>', ], ], 'defaultCapacityProviderStrategy' => [ [ 'base' => <integer>, 'capacityProvider' => '<string>', 'weight' => <integer>, ], // ... ], 'pendingTasksCount' => <integer>, 'registeredContainerInstancesCount' => <integer>, 'runningTasksCount' => <integer>, 'serviceConnectDefaults' => [ 'namespace' => '<string>', ], 'settings' => [ [ 'name' => 'containerInsights', 'value' => '<string>', ], // ... ], 'statistics' => [ [ 'name' => '<string>', 'value' => '<string>', ], // ... ], 'status' => '<string>', 'tags' => [ [ 'key' => '<string>', 'value' => '<string>', ], // ... ], ], ]
Result Details
Members
- cluster
-
- Type: Cluster structure
Details about the cluster.
Errors
- ServerException:
These errors are usually caused by a server issue.
- ClientException:
These errors are usually caused by a client action. This client action might be using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be specifying an identifier that isn't valid.
The following list includes additional causes for the error:
-
The
RunTask
could not be processed because you use managed scaling and there is a capacity error because the quota of tasks in thePROVISIONING
per cluster has been reached. For information about the service quotas, see Amazon ECS service quotas.
-
- InvalidParameterException:
The specified parameter isn't valid. Review the available parameters for the API request.
- ClusterNotFoundException:
The specified cluster wasn't found. You can view your available clusters with ListClusters. Amazon ECS clusters are Region specific.
- ResourceInUseException:
The specified resource is in-use and can't be removed.
- UpdateInProgressException:
There's already a current Amazon ECS container agent update in progress on the container instance that's specified. If the container agent becomes disconnected while it's in a transitional stage, such as
PENDING
orSTAGING
, the update process can get stuck in that state. However, when the agent reconnects, it resumes where it stopped previously.
RegisterContainerInstance
$result = $client->registerContainerInstance
([/* ... */]); $promise = $client->registerContainerInstanceAsync
([/* ... */]);
This action is only used by the Amazon ECS agent, and it is not intended for use outside of the agent.
Registers an EC2 instance into the specified cluster. This instance becomes available to place containers on.
Parameter Syntax
$result = $client->registerContainerInstance([ 'attributes' => [ [ 'name' => '<string>', // REQUIRED 'targetId' => '<string>', 'targetType' => 'container-instance', 'value' => '<string>', ], // ... ], 'cluster' => '<string>', 'containerInstanceArn' => '<string>', 'instanceIdentityDocument' => '<string>', 'instanceIdentityDocumentSignature' => '<string>', 'platformDevices' => [ [ 'id' => '<string>', // REQUIRED 'type' => 'GPU', // REQUIRED ], // ... ], 'tags' => [ [ 'key' => '<string>', 'value' => '<string>', ], // ... ], 'totalResources' => [ [ 'doubleValue' => <float>, 'integerValue' => <integer>, 'longValue' => <integer>, 'name' => '<string>', 'stringSetValue' => ['<string>', ...], 'type' => '<string>', ], // ... ], 'versionInfo' => [ 'agentHash' => '<string>', 'agentVersion' => '<string>', 'dockerVersion' => '<string>', ], ]);
Parameter Details
Members
- attributes
-
- Type: Array of Attribute structures
The container instance attributes that this container instance supports.
- cluster
-
- Type: string
The short name or full Amazon Resource Name (ARN) of the cluster to register your container instance with. If you do not specify a cluster, the default cluster is assumed.
- containerInstanceArn
-
- Type: string
The ARN of the container instance (if it was previously registered).
- instanceIdentityDocument
-
- Type: string
The instance identity document for the EC2 instance to register. This document can be found by running the following command from the instance:
curl http://169.254.169.254/latest/dynamic/instance-identity/document/
- instanceIdentityDocumentSignature
-
- Type: string
The instance identity document signature for the EC2 instance to register. This signature can be found by running the following command from the instance:
curl http://169.254.169.254/latest/dynamic/instance-identity/signature/
- platformDevices
-
- Type: Array of PlatformDevice structures
The devices that are available on the container instance. The only supported device type is a GPU.
- tags
-
- Type: Array of Tag structures
The metadata that you apply to the container instance to help you categorize and organize them. Each tag consists of a key and an optional value. You define both.
The following basic restrictions apply to tags:
-
Maximum number of tags per resource - 50
-
For each resource, each tag key must be unique, and each tag key can have only one value.
-
Maximum key length - 128 Unicode characters in UTF-8
-
Maximum value length - 256 Unicode characters in UTF-8
-
If your tagging schema is used across multiple services and resources, remember that other services may have restrictions on allowed characters. Generally allowed characters are: letters, numbers, and spaces representable in UTF-8, and the following characters: + - = . _ : / @.
-
Tag keys and values are case-sensitive.
-
Do not use
aws:
,AWS:
, or any upper or lowercase combination of such as a prefix for either keys or values as it is reserved for Amazon Web Services use. You cannot edit or delete tag keys or values with this prefix. Tags with this prefix do not count against your tags per resource limit.
- totalResources
-
- Type: Array of Resource structures
The resources available on the instance.
- versionInfo
-
- Type: VersionInfo structure
The version information for the Amazon ECS container agent and Docker daemon that runs on the container instance.
Result Syntax
[ 'containerInstance' => [ 'agentConnected' => true || false, 'agentUpdateStatus' => 'PENDING|STAGING|STAGED|UPDATING|UPDATED|FAILED', 'attachments' => [ [ 'details' => [ [ 'name' => '<string>', 'value' => '<string>', ], // ... ], 'id' => '<string>', 'status' => '<string>', 'type' => '<string>', ], // ... ], 'attributes' => [ [ 'name' => '<string>', 'targetId' => '<string>', 'targetType' => 'container-instance', 'value' => '<string>', ], // ... ], 'capacityProviderName' => '<string>', 'containerInstanceArn' => '<string>', 'ec2InstanceId' => '<string>', 'healthStatus' => [ 'details' => [ [ 'lastStatusChange' => <DateTime>, 'lastUpdated' => <DateTime>, 'status' => 'OK|IMPAIRED|INSUFFICIENT_DATA|INITIALIZING', 'type' => 'CONTAINER_RUNTIME', ], // ... ], 'overallStatus' => 'OK|IMPAIRED|INSUFFICIENT_DATA|INITIALIZING', ], 'pendingTasksCount' => <integer>, 'registeredAt' => <DateTime>, 'registeredResources' => [ [ 'doubleValue' => <float>, 'integerValue' => <integer>, 'longValue' => <integer>, 'name' => '<string>', 'stringSetValue' => ['<string>', ...], 'type' => '<string>', ], // ... ], 'remainingResources' => [ [ 'doubleValue' => <float>, 'integerValue' => <integer>, 'longValue' => <integer>, 'name' => '<string>', 'stringSetValue' => ['<string>', ...], 'type' => '<string>', ], // ... ], 'runningTasksCount' => <integer>, 'status' => '<string>', 'statusReason' => '<string>', 'tags' => [ [ 'key' => '<string>', 'value' => '<string>', ], // ... ], 'version' => <integer>, 'versionInfo' => [ 'agentHash' => '<string>', 'agentVersion' => '<string>', 'dockerVersion' => '<string>', ], ], ]
Result Details
Members
- containerInstance
-
- Type: ContainerInstance structure
The container instance that was registered.
Errors
- ServerException:
These errors are usually caused by a server issue.
- ClientException:
These errors are usually caused by a client action. This client action might be using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be specifying an identifier that isn't valid.
The following list includes additional causes for the error:
-
The
RunTask
could not be processed because you use managed scaling and there is a capacity error because the quota of tasks in thePROVISIONING
per cluster has been reached. For information about the service quotas, see Amazon ECS service quotas.
-
- InvalidParameterException:
The specified parameter isn't valid. Review the available parameters for the API request.
RegisterTaskDefinition
$result = $client->registerTaskDefinition
([/* ... */]); $promise = $client->registerTaskDefinitionAsync
([/* ... */]);
Registers a new task definition from the supplied family
and containerDefinitions
. Optionally, you can add data volumes to your containers with the volumes
parameter. For more information about task definition parameters and defaults, see Amazon ECS Task Definitions in the Amazon Elastic Container Service Developer Guide.
You can specify a role for your task with the taskRoleArn
parameter. When you specify a role for a task, its containers can then use the latest versions of the CLI or SDKs to make API requests to the Amazon Web Services services that are specified in the policy that's associated with the role. For more information, see IAM Roles for Tasks in the Amazon Elastic Container Service Developer Guide.
You can specify a Docker networking mode for the containers in your task definition with the networkMode
parameter. If you specify the awsvpc
network mode, the task is allocated an elastic network interface, and you must specify a NetworkConfiguration when you create a service or run a task with the task definition. For more information, see Task Networking in the Amazon Elastic Container Service Developer Guide.
Parameter Syntax
$result = $client->registerTaskDefinition([ 'containerDefinitions' => [ // REQUIRED [ 'command' => ['<string>', ...], 'cpu' => <integer>, 'credentialSpecs' => ['<string>', ...], 'dependsOn' => [ [ 'condition' => 'START|COMPLETE|SUCCESS|HEALTHY', // REQUIRED 'containerName' => '<string>', // REQUIRED ], // ... ], 'disableNetworking' => true || false, 'dnsSearchDomains' => ['<string>', ...], 'dnsServers' => ['<string>', ...], 'dockerLabels' => ['<string>', ...], 'dockerSecurityOptions' => ['<string>', ...], 'entryPoint' => ['<string>', ...], 'environment' => [ [ 'name' => '<string>', 'value' => '<string>', ], // ... ], 'environmentFiles' => [ [ 'type' => 's3', // REQUIRED 'value' => '<string>', // REQUIRED ], // ... ], 'essential' => true || false, 'extraHosts' => [ [ 'hostname' => '<string>', // REQUIRED 'ipAddress' => '<string>', // REQUIRED ], // ... ], 'firelensConfiguration' => [ 'options' => ['<string>', ...], 'type' => 'fluentd|fluentbit', // REQUIRED ], 'healthCheck' => [ 'command' => ['<string>', ...], // REQUIRED 'interval' => <integer>, 'retries' => <integer>, 'startPeriod' => <integer>, 'timeout' => <integer>, ], 'hostname' => '<string>', 'image' => '<string>', 'interactive' => true || false, 'links' => ['<string>', ...], 'linuxParameters' => [ 'capabilities' => [ 'add' => ['<string>', ...], 'drop' => ['<string>', ...], ], 'devices' => [ [ 'containerPath' => '<string>', 'hostPath' => '<string>', // REQUIRED 'permissions' => ['<string>', ...], ], // ... ], 'initProcessEnabled' => true || false, 'maxSwap' => <integer>, 'sharedMemorySize' => <integer>, 'swappiness' => <integer>, 'tmpfs' => [ [ 'containerPath' => '<string>', // REQUIRED 'mountOptions' => ['<string>', ...], 'size' => <integer>, // REQUIRED ], // ... ], ], 'logConfiguration' => [ 'logDriver' => 'json-file|syslog|journald|gelf|fluentd|awslogs|splunk|awsfirelens', // REQUIRED 'options' => ['<string>', ...], 'secretOptions' => [ [ 'name' => '<string>', // REQUIRED 'valueFrom' => '<string>', // REQUIRED ], // ... ], ], 'memory' => <integer>, 'memoryReservation' => <integer>, 'mountPoints' => [ [ 'containerPath' => '<string>', 'readOnly' => true || false, 'sourceVolume' => '<string>', ], // ... ], 'name' => '<string>', 'portMappings' => [ [ 'appProtocol' => 'http|http2|grpc', 'containerPort' => <integer>, 'containerPortRange' => '<string>', 'hostPort' => <integer>, 'name' => '<string>', 'protocol' => 'tcp|udp', ], // ... ], 'privileged' => true || false, 'pseudoTerminal' => true || false, 'readonlyRootFilesystem' => true || false, 'repositoryCredentials' => [ 'credentialsParameter' => '<string>', // REQUIRED ], 'resourceRequirements' => [ [ 'type' => 'GPU|InferenceAccelerator', // REQUIRED 'value' => '<string>', // REQUIRED ], // ... ], 'restartPolicy' => [ 'enabled' => true || false, // REQUIRED 'ignoredExitCodes' => [<integer>, ...], 'restartAttemptPeriod' => <integer>, ], 'secrets' => [ [ 'name' => '<string>', // REQUIRED 'valueFrom' => '<string>', // REQUIRED ], // ... ], 'startTimeout' => <integer>, 'stopTimeout' => <integer>, 'systemControls' => [ [ 'namespace' => '<string>', 'value' => '<string>', ], // ... ], 'ulimits' => [ [ 'hardLimit' => <integer>, // REQUIRED 'name' => 'core|cpu|data|fsize|locks|memlock|msgqueue|nice|nofile|nproc|rss|rtprio|rttime|sigpending|stack', // REQUIRED 'softLimit' => <integer>, // REQUIRED ], // ... ], 'user' => '<string>', 'volumesFrom' => [ [ 'readOnly' => true || false, 'sourceContainer' => '<string>', ], // ... ], 'workingDirectory' => '<string>', ], // ... ], 'cpu' => '<string>', 'ephemeralStorage' => [ 'sizeInGiB' => <integer>, // REQUIRED ], 'executionRoleArn' => '<string>', 'family' => '<string>', // REQUIRED 'inferenceAccelerators' => [ [ 'deviceName' => '<string>', // REQUIRED 'deviceType' => '<string>', // REQUIRED ], // ... ], 'ipcMode' => 'host|task|none', 'memory' => '<string>', 'networkMode' => 'bridge|host|awsvpc|none', 'pidMode' => 'host|task', 'placementConstraints' => [ [ 'expression' => '<string>', 'type' => 'memberOf', ], // ... ], 'proxyConfiguration' => [ 'containerName' => '<string>', // REQUIRED 'properties' => [ [ 'name' => '<string>', 'value' => '<string>', ], // ... ], 'type' => 'APPMESH', ], 'requiresCompatibilities' => ['<string>', ...], 'runtimePlatform' => [ 'cpuArchitecture' => 'X86_64|ARM64', 'operatingSystemFamily' => 'WINDOWS_SERVER_2019_FULL|WINDOWS_SERVER_2019_CORE|WINDOWS_SERVER_2016_FULL|WINDOWS_SERVER_2004_CORE|WINDOWS_SERVER_2022_CORE|WINDOWS_SERVER_2022_FULL|WINDOWS_SERVER_20H2_CORE|LINUX', ], 'tags' => [ [ 'key' => '<string>', 'value' => '<string>', ], // ... ], 'taskRoleArn' => '<string>', 'volumes' => [ [ 'configuredAtLaunch' => true || false, 'dockerVolumeConfiguration' => [ 'autoprovision' => true || false, 'driver' => '<string>', 'driverOpts' => ['<string>', ...], 'labels' => ['<string>', ...], 'scope' => 'task|shared', ], 'efsVolumeConfiguration' => [ 'authorizationConfig' => [ 'accessPointId' => '<string>', 'iam' => 'ENABLED|DISABLED', ], 'fileSystemId' => '<string>', // REQUIRED 'rootDirectory' => '<string>', 'transitEncryption' => 'ENABLED|DISABLED', 'transitEncryptionPort' => <integer>, ], 'fsxWindowsFileServerVolumeConfiguration' => [ 'authorizationConfig' => [ // REQUIRED 'credentialsParameter' => '<string>', // REQUIRED 'domain' => '<string>', // REQUIRED ], 'fileSystemId' => '<string>', // REQUIRED 'rootDirectory' => '<string>', // REQUIRED ], 'host' => [ 'sourcePath' => '<string>', ], 'name' => '<string>', ], // ... ], ]);
Parameter Details
Members
- containerDefinitions
-
- Required: Yes
- Type: Array of ContainerDefinition structures
A list of container definitions in JSON format that describe the different containers that make up your task.
- cpu
-
- Type: string
The number of CPU units used by the task. It can be expressed as an integer using CPU units (for example,
1024
) or as a string using vCPUs (for example,1 vCPU
or1 vcpu
) in a task definition. String values are converted to an integer indicating the CPU units when the task definition is registered.Task-level CPU and memory parameters are ignored for Windows containers. We recommend specifying container-level resources for Windows containers.
If you're using the EC2 launch type, this field is optional. Supported values are between
128
CPU units (0.125
vCPUs) and10240
CPU units (10
vCPUs). If you do not specify a value, the parameter is ignored.If you're using the Fargate launch type, this field is required and you must use one of the following values, which determines your range of supported values for the
memory
parameter:The CPU units cannot be less than 1 vCPU when you use Windows containers on Fargate.
-
256 (.25 vCPU) - Available
memory
values: 512 (0.5 GB), 1024 (1 GB), 2048 (2 GB) -
512 (.5 vCPU) - Available
memory
values: 1024 (1 GB), 2048 (2 GB), 3072 (3 GB), 4096 (4 GB) -
1024 (1 vCPU) - Available
memory
values: 2048 (2 GB), 3072 (3 GB), 4096 (4 GB), 5120 (5 GB), 6144 (6 GB), 7168 (7 GB), 8192 (8 GB) -
2048 (2 vCPU) - Available
memory
values: 4096 (4 GB) and 16384 (16 GB) in increments of 1024 (1 GB) -
4096 (4 vCPU) - Available
memory
values: 8192 (8 GB) and 30720 (30 GB) in increments of 1024 (1 GB) -
8192 (8 vCPU) - Available
memory
values: 16 GB and 60 GB in 4 GB incrementsThis option requires Linux platform
1.4.0
or later. -
16384 (16vCPU) - Available
memory
values: 32GB and 120 GB in 8 GB incrementsThis option requires Linux platform
1.4.0
or later.
- ephemeralStorage
-
- Type: EphemeralStorage structure
The amount of ephemeral storage to allocate for the task. This parameter is used to expand the total amount of ephemeral storage available, beyond the default amount, for tasks hosted on Fargate. For more information, see Using data volumes in tasks in the Amazon ECS Developer Guide.
For tasks using the Fargate launch type, the task requires the following platforms:
-
Linux platform version
1.4.0
or later. -
Windows platform version
1.0.0
or later.
- executionRoleArn
-
- Type: string
The Amazon Resource Name (ARN) of the task execution role that grants the Amazon ECS container agent permission to make Amazon Web Services API calls on your behalf. For informationabout the required IAM roles for Amazon ECS, see IAM roles for Amazon ECS in the Amazon Elastic Container Service Developer Guide.
- family
-
- Required: Yes
- Type: string
You must specify a
family
for a task definition. You can use it track multiple versions of the same task definition. Thefamily
is used as a name for your task definition. Up to 255 letters (uppercase and lowercase), numbers, underscores, and hyphens are allowed. - inferenceAccelerators
-
- Type: Array of InferenceAccelerator structures
The Elastic Inference accelerators to use for the containers in the task.
- ipcMode
-
- Type: string
The IPC resource namespace to use for the containers in the task. The valid values are
host
,task
, ornone
. Ifhost
is specified, then all containers within the tasks that specified thehost
IPC mode on the same container instance share the same IPC resources with the host Amazon EC2 instance. Iftask
is specified, all containers within the specified task share the same IPC resources. Ifnone
is specified, then IPC resources within the containers of a task are private and not shared with other containers in a task or on the container instance. If no value is specified, then the IPC resource namespace sharing depends on the Docker daemon setting on the container instance. For more information, see IPC settings in the Docker run reference.If the
host
IPC mode is used, be aware that there is a heightened risk of undesired IPC namespace expose. For more information, see Docker security.If you are setting namespaced kernel parameters using
systemControls
for the containers in the task, the following will apply to your IPC resource namespace. For more information, see System Controls in the Amazon Elastic Container Service Developer Guide.-
For tasks that use the
host
IPC mode, IPC namespace relatedsystemControls
are not supported. -
For tasks that use the
task
IPC mode, IPC namespace relatedsystemControls
will apply to all containers within a task.
This parameter is not supported for Windows containers or tasks run on Fargate.
- memory
-
- Type: string
The amount of memory (in MiB) used by the task. It can be expressed as an integer using MiB (for example ,
1024
) or as a string using GB (for example,1GB
or1 GB
) in a task definition. String values are converted to an integer indicating the MiB when the task definition is registered.Task-level CPU and memory parameters are ignored for Windows containers. We recommend specifying container-level resources for Windows containers.
If using the EC2 launch type, this field is optional.
If using the Fargate launch type, this field is required and you must use one of the following values. This determines your range of supported values for the
cpu
parameter.The CPU units cannot be less than 1 vCPU when you use Windows containers on Fargate.
-
512 (0.5 GB), 1024 (1 GB), 2048 (2 GB) - Available
cpu
values: 256 (.25 vCPU) -
1024 (1 GB), 2048 (2 GB), 3072 (3 GB), 4096 (4 GB) - Available
cpu
values: 512 (.5 vCPU) -
2048 (2 GB), 3072 (3 GB), 4096 (4 GB), 5120 (5 GB), 6144 (6 GB), 7168 (7 GB), 8192 (8 GB) - Available
cpu
values: 1024 (1 vCPU) -
Between 4096 (4 GB) and 16384 (16 GB) in increments of 1024 (1 GB) - Available
cpu
values: 2048 (2 vCPU) -
Between 8192 (8 GB) and 30720 (30 GB) in increments of 1024 (1 GB) - Available
cpu
values: 4096 (4 vCPU) -
Between 16 GB and 60 GB in 4 GB increments - Available
cpu
values: 8192 (8 vCPU)This option requires Linux platform
1.4.0
or later. -
Between 32GB and 120 GB in 8 GB increments - Available
cpu
values: 16384 (16 vCPU)This option requires Linux platform
1.4.0
or later.
- networkMode
-
- Type: string
The Docker networking mode to use for the containers in the task. The valid values are
none
,bridge
,awsvpc
, andhost
. If no network mode is specified, the default isbridge
.For Amazon ECS tasks on Fargate, the
awsvpc
network mode is required. For Amazon ECS tasks on Amazon EC2 Linux instances, any network mode can be used. For Amazon ECS tasks on Amazon EC2 Windows instances,<default>
orawsvpc
can be used. If the network mode is set tonone
, you cannot specify port mappings in your container definitions, and the tasks containers do not have external connectivity. Thehost
andawsvpc
network modes offer the highest networking performance for containers because they use the EC2 network stack instead of the virtualized network stack provided by thebridge
mode.With the
host
andawsvpc
network modes, exposed container ports are mapped directly to the corresponding host port (for thehost
network mode) or the attached elastic network interface port (for theawsvpc
network mode), so you cannot take advantage of dynamic host port mappings.When using the
host
network mode, you should not run containers using the root user (UID 0). It is considered best practice to use a non-root user.If the network mode is
awsvpc
, the task is allocated an elastic network interface, and you must specify a NetworkConfiguration value when you create a service or run a task with the task definition. For more information, see Task Networking in the Amazon Elastic Container Service Developer Guide.If the network mode is
host
, you cannot run multiple instantiations of the same task on a single container instance when port mappings are used.For more information, see Network settings in the Docker run reference.
- pidMode
-
- Type: string
The process namespace to use for the containers in the task. The valid values are
host
ortask
. On Fargate for Linux containers, the only valid value istask
. For example, monitoring sidecars might needpidMode
to access information about other containers running in the same task.If
host
is specified, all containers within the tasks that specified thehost
PID mode on the same container instance share the same process namespace with the host Amazon EC2 instance.If
task
is specified, all containers within the specified task share the same process namespace.If no value is specified, the default is a private namespace for each container. For more information, see PID settings in the Docker run reference.
If the
host
PID mode is used, there's a heightened risk of undesired process namespace exposure. For more information, see Docker security.This parameter is not supported for Windows containers.
This parameter is only supported for tasks that are hosted on Fargate if the tasks are using platform version
1.4.0
or later (Linux). This isn't supported for Windows containers on Fargate. - placementConstraints
-
- Type: Array of TaskDefinitionPlacementConstraint structures
An array of placement constraint objects to use for the task. You can specify a maximum of 10 constraints for each task. This limit includes constraints in the task definition and those specified at runtime.
- proxyConfiguration
-
- Type: ProxyConfiguration structure
The configuration details for the App Mesh proxy.
For tasks hosted on Amazon EC2 instances, the container instances require at least version
1.26.0
of the container agent and at least version1.26.0-1
of theecs-init
package to use a proxy configuration. If your container instances are launched from the Amazon ECS-optimized AMI version20190301
or later, then they contain the required versions of the container agent andecs-init
. For more information, see Amazon ECS-optimized AMI versions in the Amazon Elastic Container Service Developer Guide. - requiresCompatibilities
-
- Type: Array of strings
The task launch type that Amazon ECS validates the task definition against. A client exception is returned if the task definition doesn't validate against the compatibilities specified. If no value is specified, the parameter is omitted from the response.
- runtimePlatform
-
- Type: RuntimePlatform structure
The operating system that your tasks definitions run on. A platform family is specified only for tasks using the Fargate launch type.
- tags
-
- Type: Array of Tag structures
The metadata that you apply to the task definition to help you categorize and organize them. Each tag consists of a key and an optional value. You define both of them.
The following basic restrictions apply to tags:
-
Maximum number of tags per resource - 50
-
For each resource, each tag key must be unique, and each tag key can have only one value.
-
Maximum key length - 128 Unicode characters in UTF-8
-
Maximum value length - 256 Unicode characters in UTF-8
-
If your tagging schema is used across multiple services and resources, remember that other services may have restrictions on allowed characters. Generally allowed characters are: letters, numbers, and spaces representable in UTF-8, and the following characters: + - = . _ : / @.
-
Tag keys and values are case-sensitive.
-
Do not use
aws:
,AWS:
, or any upper or lowercase combination of such as a prefix for either keys or values as it is reserved for Amazon Web Services use. You cannot edit or delete tag keys or values with this prefix. Tags with this prefix do not count against your tags per resource limit.
- taskRoleArn
-
- Type: string
The short name or full Amazon Resource Name (ARN) of the IAM role that containers in this task can assume. All containers in this task are granted the permissions that are specified in this role. For more information, see IAM Roles for Tasks in the Amazon Elastic Container Service Developer Guide.
- volumes
-
- Type: Array of Volume structures
A list of volume definitions in JSON format that containers in your task might use.
Result Syntax
[ 'tags' => [ [ 'key' => '<string>', 'value' => '<string>', ], // ... ], 'taskDefinition' => [ 'compatibilities' => ['<string>', ...], 'containerDefinitions' => [ [ 'command' => ['<string>', ...], 'cpu' => <integer>, 'credentialSpecs' => ['<string>', ...], 'dependsOn' => [ [ 'condition' => 'START|COMPLETE|SUCCESS|HEALTHY', 'containerName' => '<string>', ], // ... ], 'disableNetworking' => true || false, 'dnsSearchDomains' => ['<string>', ...], 'dnsServers' => ['<string>', ...], 'dockerLabels' => ['<string>', ...], 'dockerSecurityOptions' => ['<string>', ...], 'entryPoint' => ['<string>', ...], 'environment' => [ [ 'name' => '<string>', 'value' => '<string>', ], // ... ], 'environmentFiles' => [ [ 'type' => 's3', 'value' => '<string>', ], // ... ], 'essential' => true || false, 'extraHosts' => [ [ 'hostname' => '<string>', 'ipAddress' => '<string>', ], // ... ], 'firelensConfiguration' => [ 'options' => ['<string>', ...], 'type' => 'fluentd|fluentbit', ], 'healthCheck' => [ 'command' => ['<string>', ...], 'interval' => <integer>, 'retries' => <integer>, 'startPeriod' => <integer>, 'timeout' => <integer>, ], 'hostname' => '<string>', 'image' => '<string>', 'interactive' => true || false, 'links' => ['<string>', ...], 'linuxParameters' => [ 'capabilities' => [ 'add' => ['<string>', ...], 'drop' => ['<string>', ...], ], 'devices' => [ [ 'containerPath' => '<string>', 'hostPath' => '<string>', 'permissions' => ['<string>', ...], ], // ... ], 'initProcessEnabled' => true || false, 'maxSwap' => <integer>, 'sharedMemorySize' => <integer>, 'swappiness' => <integer>, 'tmpfs' => [ [ 'containerPath' => '<string>', 'mountOptions' => ['<string>', ...], 'size' => <integer>, ], // ... ], ], 'logConfiguration' => [ 'logDriver' => 'json-file|syslog|journald|gelf|fluentd|awslogs|splunk|awsfirelens', 'options' => ['<string>', ...], 'secretOptions' => [ [ 'name' => '<string>', 'valueFrom' => '<string>', ], // ... ], ], 'memory' => <integer>, 'memoryReservation' => <integer>, 'mountPoints' => [ [ 'containerPath' => '<string>', 'readOnly' => true || false, 'sourceVolume' => '<string>', ], // ... ], 'name' => '<string>', 'portMappings' => [ [ 'appProtocol' => 'http|http2|grpc', 'containerPort' => <integer>, 'containerPortRange' => '<string>', 'hostPort' => <integer>, 'name' => '<string>', 'protocol' => 'tcp|udp', ], // ... ], 'privileged' => true || false, 'pseudoTerminal' => true || false, 'readonlyRootFilesystem' => true || false, 'repositoryCredentials' => [ 'credentialsParameter' => '<string>', ], 'resourceRequirements' => [ [ 'type' => 'GPU|InferenceAccelerator', 'value' => '<string>', ], // ... ], 'restartPolicy' => [ 'enabled' => true || false, 'ignoredExitCodes' => [<integer>, ...], 'restartAttemptPeriod' => <integer>, ], 'secrets' => [ [ 'name' => '<string>', 'valueFrom' => '<string>', ], // ... ], 'startTimeout' => <integer>, 'stopTimeout' => <integer>, 'systemControls' => [ [ 'namespace' => '<string>', 'value' => '<string>', ], // ... ], 'ulimits' => [ [ 'hardLimit' => <integer>, 'name' => 'core|cpu|data|fsize|locks|memlock|msgqueue|nice|nofile|nproc|rss|rtprio|rttime|sigpending|stack', 'softLimit' => <integer>, ], // ... ], 'user' => '<string>', 'volumesFrom' => [ [ 'readOnly' => true || false, 'sourceContainer' => '<string>', ], // ... ], 'workingDirectory' => '<string>', ], // ... ], 'cpu' => '<string>', 'deregisteredAt' => <DateTime>, 'ephemeralStorage' => [ 'sizeInGiB' => <integer>, ], 'executionRoleArn' => '<string>', 'family' => '<string>', 'inferenceAccelerators' => [ [ 'deviceName' => '<string>', 'deviceType' => '<string>', ], // ... ], 'ipcMode' => 'host|task|none', 'memory' => '<string>', 'networkMode' => 'bridge|host|awsvpc|none', 'pidMode' => 'host|task', 'placementConstraints' => [ [ 'expression' => '<string>', 'type' => 'memberOf', ], // ... ], 'proxyConfiguration' => [ 'containerName' => '<string>', 'properties' => [ [ 'name' => '<string>', 'value' => '<string>', ], // ... ], 'type' => 'APPMESH', ], 'registeredAt' => <DateTime>, 'registeredBy' => '<string>', 'requiresAttributes' => [ [ 'name' => '<string>', 'targetId' => '<string>', 'targetType' => 'container-instance', 'value' => '<string>', ], // ... ], 'requiresCompatibilities' => ['<string>', ...], 'revision' => <integer>, 'runtimePlatform' => [ 'cpuArchitecture' => 'X86_64|ARM64', 'operatingSystemFamily' => 'WINDOWS_SERVER_2019_FULL|WINDOWS_SERVER_2019_CORE|WINDOWS_SERVER_2016_FULL|WINDOWS_SERVER_2004_CORE|WINDOWS_SERVER_2022_CORE|WINDOWS_SERVER_2022_FULL|WINDOWS_SERVER_20H2_CORE|LINUX', ], 'status' => 'ACTIVE|INACTIVE|DELETE_IN_PROGRESS', 'taskDefinitionArn' => '<string>', 'taskRoleArn' => '<string>', 'volumes' => [ [ 'configuredAtLaunch' => true || false, 'dockerVolumeConfiguration' => [ 'autoprovision' => true || false, 'driver' => '<string>', 'driverOpts' => ['<string>', ...], 'labels' => ['<string>', ...], 'scope' => 'task|shared', ], 'efsVolumeConfiguration' => [ 'authorizationConfig' => [ 'accessPointId' => '<string>', 'iam' => 'ENABLED|DISABLED', ], 'fileSystemId' => '<string>', 'rootDirectory' => '<string>', 'transitEncryption' => 'ENABLED|DISABLED', 'transitEncryptionPort' => <integer>, ], 'fsxWindowsFileServerVolumeConfiguration' => [ 'authorizationConfig' => [ 'credentialsParameter' => '<string>', 'domain' => '<string>', ], 'fileSystemId' => '<string>', 'rootDirectory' => '<string>', ], 'host' => [ 'sourcePath' => '<string>', ], 'name' => '<string>', ], // ... ], ], ]
Result Details
Members
- tags
-
- Type: Array of Tag structures
The list of tags associated with the task definition.
- taskDefinition
-
- Type: TaskDefinition structure
The full description of the registered task definition.
Errors
- ServerException:
These errors are usually caused by a server issue.
- ClientException:
These errors are usually caused by a client action. This client action might be using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be specifying an identifier that isn't valid.
The following list includes additional causes for the error:
-
The
RunTask
could not be processed because you use managed scaling and there is a capacity error because the quota of tasks in thePROVISIONING
per cluster has been reached. For information about the service quotas, see Amazon ECS service quotas.
-
- InvalidParameterException:
The specified parameter isn't valid. Review the available parameters for the API request.
Examples
Example 1: To register a task definition
This example registers a task definition to the specified family.
$result = $client->registerTaskDefinition([ 'containerDefinitions' => [ [ 'name' => 'sleep', 'command' => [ 'sleep', '360', ], 'cpu' => 10, 'essential' => 1, 'image' => 'busybox', 'memory' => 10, ], ], 'family' => 'sleep360', 'taskRoleArn' => '', 'volumes' => [ ], ]);
Result syntax:
[ 'taskDefinition' => [ 'containerDefinitions' => [ [ 'name' => 'sleep', 'command' => [ 'sleep', '360', ], 'cpu' => 10, 'environment' => [ ], 'essential' => 1, 'image' => 'busybox', 'memory' => 10, 'mountPoints' => [ ], 'portMappings' => [ ], 'volumesFrom' => [ ], ], ], 'family' => 'sleep360', 'revision' => 1, 'taskDefinitionArn' => 'arn:aws:ecs:us-east-1::task-definition/sleep360:19', 'volumes' => [ ], ], ]
RunTask
$result = $client->runTask
([/* ... */]); $promise = $client->runTaskAsync
([/* ... */]);
Starts a new task using the specified task definition.
On March 21, 2024, a change was made to resolve the task definition revision before authorization. When a task definition revision is not specified, authorization will occur using the latest revision of a task definition.
Amazon Elastic Inference (EI) is no longer available to customers.
You can allow Amazon ECS to place tasks for you, or you can customize how Amazon ECS places tasks using placement constraints and placement strategies. For more information, see Scheduling Tasks in the Amazon Elastic Container Service Developer Guide.
Alternatively, you can use StartTask
to use your own scheduler or place tasks manually on specific container instances.
You can attach Amazon EBS volumes to Amazon ECS tasks by configuring the volume when creating or updating a service. For more infomation, see Amazon EBS volumes in the Amazon Elastic Container Service Developer Guide.
The Amazon ECS API follows an eventual consistency model. This is because of the distributed nature of the system supporting the API. This means that the result of an API command you run that affects your Amazon ECS resources might not be immediately visible to all subsequent commands you run. Keep this in mind when you carry out an API command that immediately follows a previous API command.
To manage eventual consistency, you can do the following:
-
Confirm the state of the resource before you run a command to modify it. Run the DescribeTasks command using an exponential backoff algorithm to ensure that you allow enough time for the previous command to propagate through the system. To do this, run the DescribeTasks command repeatedly, starting with a couple of seconds of wait time and increasing gradually up to five minutes of wait time.
-
Add wait time between subsequent commands, even if the DescribeTasks command returns an accurate response. Apply an exponential backoff algorithm starting with a couple of seconds of wait time, and increase gradually up to about five minutes of wait time.
Parameter Syntax
$result = $client->runTask([ 'capacityProviderStrategy' => [ [ 'base' => <integer>, 'capacityProvider' => '<string>', // REQUIRED 'weight' => <integer>, ], // ... ], 'clientToken' => '<string>', 'cluster' => '<string>', 'count' => <integer>, 'enableECSManagedTags' => true || false, 'enableExecuteCommand' => true || false, 'group' => '<string>', 'launchType' => 'EC2|FARGATE|EXTERNAL', 'networkConfiguration' => [ 'awsvpcConfiguration' => [ 'assignPublicIp' => 'ENABLED|DISABLED', 'securityGroups' => ['<string>', ...], 'subnets' => ['<string>', ...], // REQUIRED ], ], 'overrides' => [ 'containerOverrides' => [ [ 'command' => ['<string>', ...], 'cpu' => <integer>, 'environment' => [ [ 'name' => '<string>', 'value' => '<string>', ], // ... ], 'environmentFiles' => [ [ 'type' => 's3', // REQUIRED 'value' => '<string>', // REQUIRED ], // ... ], 'memory' => <integer>, 'memoryReservation' => <integer>, 'name' => '<string>', 'resourceRequirements' => [ [ 'type' => 'GPU|InferenceAccelerator', // REQUIRED 'value' => '<string>', // REQUIRED ], // ... ], ], // ... ], 'cpu' => '<string>', 'ephemeralStorage' => [ 'sizeInGiB' => <integer>, // REQUIRED ], 'executionRoleArn' => '<string>', 'inferenceAcceleratorOverrides' => [ [ 'deviceName' => '<string>', 'deviceType' => '<string>', ], // ... ], 'memory' => '<string>', 'taskRoleArn' => '<string>', ], 'placementConstraints' => [ [ 'expression' => '<string>', 'type' => 'distinctInstance|memberOf', ], // ... ], 'placementStrategy' => [ [ 'field' => '<string>', 'type' => 'random|spread|binpack', ], // ... ], 'platformVersion' => '<string>', 'propagateTags' => 'TASK_DEFINITION|SERVICE|NONE', 'referenceId' => '<string>', 'startedBy' => '<string>', 'tags' => [ [ 'key' => '<string>', 'value' => '<string>', ], // ... ], 'taskDefinition' => '<string>', // REQUIRED 'volumeConfigurations' => [ [ 'managedEBSVolume' => [ 'encrypted' => true || false, 'filesystemType' => 'ext3|ext4|xfs|ntfs', 'iops' => <integer>, 'kmsKeyId' => '<string>', 'roleArn' => '<string>', // REQUIRED 'sizeInGiB' => <integer>, 'snapshotId' => '<string>', 'tagSpecifications' => [ [ 'propagateTags' => 'TASK_DEFINITION|SERVICE|NONE', 'resourceType' => 'volume', // REQUIRED 'tags' => [ [ 'key' => '<string>', 'value' => '<string>', ], // ... ], ], // ... ], 'terminationPolicy' => [ 'deleteOnTermination' => true || false, // REQUIRED ], 'throughput' => <integer>, 'volumeType' => '<string>', ], 'name' => '<string>', // REQUIRED ], // ... ], ]);
Parameter Details
Members
- capacityProviderStrategy
-
- Type: Array of CapacityProviderStrategyItem structures
The capacity provider strategy to use for the task.
If a
capacityProviderStrategy
is specified, thelaunchType
parameter must be omitted. If nocapacityProviderStrategy
orlaunchType
is specified, thedefaultCapacityProviderStrategy
for the cluster is used.When you use cluster auto scaling, you must specify
capacityProviderStrategy
and notlaunchType
.A capacity provider strategy may contain a maximum of 6 capacity providers.
- clientToken
-
- Type: string
An identifier that you provide to ensure the idempotency of the request. It must be unique and is case sensitive. Up to 64 characters are allowed. The valid characters are characters in the range of 33-126, inclusive. For more information, see Ensuring idempotency.
- cluster
-
- Type: string
The short name or full Amazon Resource Name (ARN) of the cluster to run your task on. If you do not specify a cluster, the default cluster is assumed.
- count
-
- Type: int
The number of instantiations of the specified task to place on your cluster. You can specify up to 10 tasks for each call.
- enableECSManagedTags
-
- Type: boolean
Specifies whether to use Amazon ECS managed tags for the task. For more information, see Tagging Your Amazon ECS Resources in the Amazon Elastic Container Service Developer Guide.
- enableExecuteCommand
-
- Type: boolean
Determines whether to use the execute command functionality for the containers in this task. If
true
, this enables execute command functionality on all containers in the task.If
true
, then the task definition must have a task role, or you must provide one as an override. - group
-
- Type: string
The name of the task group to associate with the task. The default value is the family name of the task definition (for example,
family:my-family-name
). - launchType
-
- Type: string
The infrastructure to run your standalone task on. For more information, see Amazon ECS launch types in the Amazon Elastic Container Service Developer Guide.
The
FARGATE
launch type runs your tasks on Fargate On-Demand infrastructure.Fargate Spot infrastructure is available for use but a capacity provider strategy must be used. For more information, see Fargate capacity providers in the Amazon ECS Developer Guide.
The
EC2
launch type runs your tasks on Amazon EC2 instances registered to your cluster.The
EXTERNAL
launch type runs your tasks on your on-premises server or virtual machine (VM) capacity registered to your cluster.A task can use either a launch type or a capacity provider strategy. If a
launchType
is specified, thecapacityProviderStrategy
parameter must be omitted.When you use cluster auto scaling, you must specify
capacityProviderStrategy
and notlaunchType
. - networkConfiguration
-
- Type: NetworkConfiguration structure
The network configuration for the task. This parameter is required for task definitions that use the
awsvpc
network mode to receive their own elastic network interface, and it isn't supported for other network modes. For more information, see Task networking in the Amazon Elastic Container Service Developer Guide. - overrides
-
- Type: TaskOverride structure
A list of container overrides in JSON format that specify the name of a container in the specified task definition and the overrides it should receive. You can override the default command for a container (that's specified in the task definition or Docker image) with a
command
override. You can also override existing environment variables (that are specified in the task definition or Docker image) on a container or add new environment variables to it with anenvironment
override.A total of 8192 characters are allowed for overrides. This limit includes the JSON formatting characters of the override structure.
- placementConstraints
-
- Type: Array of PlacementConstraint structures
An array of placement constraint objects to use for the task. You can specify up to 10 constraints for each task (including constraints in the task definition and those specified at runtime).
- placementStrategy
-
- Type: Array of PlacementStrategy structures
The placement strategy objects to use for the task. You can specify a maximum of 5 strategy rules for each task.
- platformVersion
-
- Type: string
The platform version the task uses. A platform version is only specified for tasks hosted on Fargate. If one isn't specified, the
LATEST
platform version is used. For more information, see Fargate platform versions in the Amazon Elastic Container Service Developer Guide. - propagateTags
-
- Type: string
Specifies whether to propagate the tags from the task definition to the task. If no value is specified, the tags aren't propagated. Tags can only be propagated to the task during task creation. To add tags to a task after task creation, use theTagResource API action.
An error will be received if you specify the
SERVICE
option when running a task. - referenceId
-
- Type: string
This parameter is only used by Amazon ECS. It is not intended for use by customers.
- startedBy
-
- Type: string
An optional tag specified when a task is started. For example, if you automatically trigger a task to run a batch process job, you could apply a unique identifier for that job to your task with the
startedBy
parameter. You can then identify which tasks belong to that job by filtering the results of a ListTasks call with thestartedBy
value. Up to 128 letters (uppercase and lowercase), numbers, hyphens (-), forward slash (/), and underscores (_) are allowed.If a task is started by an Amazon ECS service, then the
startedBy
parameter contains the deployment ID of the service that starts it. - tags
-
- Type: Array of Tag structures
The metadata that you apply to the task to help you categorize and organize them. Each tag consists of a key and an optional value, both of which you define.
The following basic restrictions apply to tags:
-
Maximum number of tags per resource - 50
-
For each resource, each tag key must be unique, and each tag key can have only one value.
-
Maximum key length - 128 Unicode characters in UTF-8
-
Maximum value length - 256 Unicode characters in UTF-8
-
If your tagging schema is used across multiple services and resources, remember that other services may have restrictions on allowed characters. Generally allowed characters are: letters, numbers, and spaces representable in UTF-8, and the following characters: + - = . _ : / @.
-
Tag keys and values are case-sensitive.
-
Do not use
aws:
,AWS:
, or any upper or lowercase combination of such as a prefix for either keys or values as it is reserved for Amazon Web Services use. You cannot edit or delete tag keys or values with this prefix. Tags with this prefix do not count against your tags per resource limit.
- taskDefinition
-
- Required: Yes
- Type: string
The
family
andrevision
(family:revision
) or full ARN of the task definition to run. If arevision
isn't specified, the latestACTIVE
revision is used.The full ARN value must match the value that you specified as the
Resource
of the principal's permissions policy.When you specify a task definition, you must either specify a specific revision, or all revisions in the ARN.
To specify a specific revision, include the revision number in the ARN. For example, to specify revision 2, use
arn:aws:ecs:us-east-1:111122223333:task-definition/TaskFamilyName:2
.To specify all revisions, use the wildcard (*) in the ARN. For example, to specify all revisions, use
arn:aws:ecs:us-east-1:111122223333:task-definition/TaskFamilyName:*
.For more information, see Policy Resources for Amazon ECS in the Amazon Elastic Container Service Developer Guide.
- volumeConfigurations
-
- Type: Array of TaskVolumeConfiguration structures
The details of the volume that was
configuredAtLaunch
. You can configure the size, volumeType, IOPS, throughput, snapshot and encryption in in TaskManagedEBSVolumeConfiguration. Thename
of the volume must match thename
from the task definition.
Result Syntax
[ 'failures' => [ [ 'arn' => '<string>', 'detail' => '<string>', 'reason' => '<string>', ], // ... ], 'tasks' => [ [ 'attachments' => [ [ 'details' => [ [ 'name' => '<string>', 'value' => '<string>', ], // ... ], 'id' => '<string>', 'status' => '<string>', 'type' => '<string>', ], // ... ], 'attributes' => [ [ 'name' => '<string>', 'targetId' => '<string>', 'targetType' => 'container-instance', 'value' => '<string>', ], // ... ], 'availabilityZone' => '<string>', 'capacityProviderName' => '<string>', 'clusterArn' => '<string>', 'connectivity' => 'CONNECTED|DISCONNECTED', 'connectivityAt' => <DateTime>, 'containerInstanceArn' => '<string>', 'containers' => [ [ 'containerArn' => '<string>', 'cpu' => '<string>', 'exitCode' => <integer>, 'gpuIds' => ['<string>', ...], 'healthStatus' => 'HEALTHY|UNHEALTHY|UNKNOWN', 'image' => '<string>', 'imageDigest' => '<string>', 'lastStatus' => '<string>', 'managedAgents' => [ [ 'lastStartedAt' => <DateTime>, 'lastStatus' => '<string>', 'name' => 'ExecuteCommandAgent', 'reason' => '<string>', ], // ... ], 'memory' => '<string>', 'memoryReservation' => '<string>', 'name' => '<string>', 'networkBindings' => [ [ 'bindIP' => '<string>', 'containerPort' => <integer>, 'containerPortRange' => '<string>', 'hostPort' => <integer>, 'hostPortRange' => '<string>', 'protocol' => 'tcp|udp', ], // ... ], 'networkInterfaces' => [ [ 'attachmentId' => '<string>', 'ipv6Address' => '<string>', 'privateIpv4Address' => '<string>', ], // ... ], 'reason' => '<string>', 'runtimeId' => '<string>', 'taskArn' => '<string>', ], // ... ], 'cpu' => '<string>', 'createdAt' => <DateTime>, 'desiredStatus' => '<string>', 'enableExecuteCommand' => true || false, 'ephemeralStorage' => [ 'sizeInGiB' => <integer>, ], 'executionStoppedAt' => <DateTime>, 'fargateEphemeralStorage' => [ 'kmsKeyId' => '<string>', 'sizeInGiB' => <integer>, ], 'group' => '<string>', 'healthStatus' => 'HEALTHY|UNHEALTHY|UNKNOWN', 'inferenceAccelerators' => [ [ 'deviceName' => '<string>', 'deviceType' => '<string>', ], // ... ], 'lastStatus' => '<string>', 'launchType' => 'EC2|FARGATE|EXTERNAL', 'memory' => '<string>', 'overrides' => [ 'containerOverrides' => [ [ 'command' => ['<string>', ...], 'cpu' => <integer>, 'environment' => [ [ 'name' => '<string>', 'value' => '<string>', ], // ... ], 'environmentFiles' => [ [ 'type' => 's3', 'value' => '<string>', ], // ... ], 'memory' => <integer>, 'memoryReservation' => <integer>, 'name' => '<string>', 'resourceRequirements' => [ [ 'type' => 'GPU|InferenceAccelerator', 'value' => '<string>', ], // ... ], ], // ... ], 'cpu' => '<string>', 'ephemeralStorage' => [ 'sizeInGiB' => <integer>, ], 'executionRoleArn' => '<string>', 'inferenceAcceleratorOverrides' => [ [ 'deviceName' => '<string>', 'deviceType' => '<string>', ], // ... ], 'memory' => '<string>', 'taskRoleArn' => '<string>', ], 'platformFamily' => '<string>', 'platformVersion' => '<string>', 'pullStartedAt' => <DateTime>, 'pullStoppedAt' => <DateTime>, 'startedAt' => <DateTime>, 'startedBy' => '<string>', 'stopCode' => 'TaskFailedToStart|EssentialContainerExited|UserInitiated|ServiceSchedulerInitiated|SpotInterruption|TerminationNotice', 'stoppedAt' => <DateTime>, 'stoppedReason' => '<string>', 'stoppingAt' => <DateTime>, 'tags' => [ [ 'key' => '<string>', 'value' => '<string>', ], // ... ], 'taskArn' => '<string>', 'taskDefinitionArn' => '<string>', 'version' => <integer>, ], // ... ], ]
Result Details
Members
- failures
-
- Type: Array of Failure structures
Any failures associated with the call.
For information about how to address failures, see Service event messages and API failure reasons in the Amazon Elastic Container Service Developer Guide.
- tasks
-
- Type: Array of Task structures
A full description of the tasks that were run. The tasks that were successfully placed on your cluster are described here.
Errors
- ServerException:
These errors are usually caused by a server issue.
- ClientException:
These errors are usually caused by a client action. This client action might be using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be specifying an identifier that isn't valid.
The following list includes additional causes for the error:
-
The
RunTask
could not be processed because you use managed scaling and there is a capacity error because the quota of tasks in thePROVISIONING
per cluster has been reached. For information about the service quotas, see Amazon ECS service quotas.
-
- InvalidParameterException:
The specified parameter isn't valid. Review the available parameters for the API request.
- ClusterNotFoundException:
The specified cluster wasn't found. You can view your available clusters with ListClusters. Amazon ECS clusters are Region specific.
- UnsupportedFeatureException:
The specified task isn't supported in this Region.
- PlatformUnknownException:
The specified platform version doesn't exist.
- PlatformTaskDefinitionIncompatibilityException:
The specified platform version doesn't satisfy the required capabilities of the task definition.
- AccessDeniedException:
You don't have authorization to perform the requested action.
- BlockedException:
Your Amazon Web Services account was blocked. For more information, contact Amazon Web Services Support.
- ConflictException:
The
RunTask
request could not be processed due to conflicts. The providedclientToken
is already in use with a differentRunTask
request. TheresourceIds
are the existing task ARNs which are already associated with theclientToken
.To fix this issue:
-
Run
RunTask
with a uniqueclientToken
. -
Run
RunTask
with theclientToken
and the original set of parameters
-
Examples
Example 1: To run a task on your default cluster
This example runs the specified task definition on your default cluster.
$result = $client->runTask([ 'cluster' => 'default', 'taskDefinition' => 'sleep360:1', ]);
Result syntax:
[ 'tasks' => [ [ 'containerInstanceArn' => 'arn:aws:ecs:us-east-1::container-instance/default/ffe3d344-77e2-476c-a4d0-bf560ad50acb', 'containers' => [ [ 'name' => 'sleep', 'containerArn' => 'arn:aws:ecs:us-east-1: :container/default/58591c8e-be29-4ddf-95aa-ee459d4c59fd', 'lastStatus' => 'PENDING', 'taskArn' => 'arn:aws:ecs:us-east-1: :task/default/a9f21ea7-c9f5-44b1-b8e6-b31f50ed33c0', ], ], 'desiredStatus' => 'RUNNING', 'lastStatus' => 'PENDING', 'overrides' => [ 'containerOverrides' => [ [ 'name' => 'sleep', ], ], ], 'taskArn' => 'arn:aws:ecs:us-east-1: :task/default/a9f21ea7-c9f5-44b1-b8e6-b31f50ed33c0', 'taskDefinitionArn' => 'arn:aws:ecs:us-east-1: :task-definition/sleep360:1', ], ], ]
StartTask
$result = $client->startTask
([/* ... */]); $promise = $client->startTaskAsync
([/* ... */]);
Starts a new task from the specified task definition on the specified container instance or instances.
On March 21, 2024, a change was made to resolve the task definition revision before authorization. When a task definition revision is not specified, authorization will occur using the latest revision of a task definition.
Amazon Elastic Inference (EI) is no longer available to customers.
Alternatively, you can useRunTask
to place tasks for you. For more information, see Scheduling Tasks in the Amazon Elastic Container Service Developer Guide.
You can attach Amazon EBS volumes to Amazon ECS tasks by configuring the volume when creating or updating a service. For more infomation, see Amazon EBS volumes in the Amazon Elastic Container Service Developer Guide.
Parameter Syntax
$result = $client->startTask([ 'cluster' => '<string>', 'containerInstances' => ['<string>', ...], // REQUIRED 'enableECSManagedTags' => true || false, 'enableExecuteCommand' => true || false, 'group' => '<string>', 'networkConfiguration' => [ 'awsvpcConfiguration' => [ 'assignPublicIp' => 'ENABLED|DISABLED', 'securityGroups' => ['<string>', ...], 'subnets' => ['<string>', ...], // REQUIRED ], ], 'overrides' => [ 'containerOverrides' => [ [ 'command' => ['<string>', ...], 'cpu' => <integer>, 'environment' => [ [ 'name' => '<string>', 'value' => '<string>', ], // ... ], 'environmentFiles' => [ [ 'type' => 's3', // REQUIRED 'value' => '<string>', // REQUIRED ], // ... ], 'memory' => <integer>, 'memoryReservation' => <integer>, 'name' => '<string>', 'resourceRequirements' => [ [ 'type' => 'GPU|InferenceAccelerator', // REQUIRED 'value' => '<string>', // REQUIRED ], // ... ], ], // ... ], 'cpu' => '<string>', 'ephemeralStorage' => [ 'sizeInGiB' => <integer>, // REQUIRED ], 'executionRoleArn' => '<string>', 'inferenceAcceleratorOverrides' => [ [ 'deviceName' => '<string>', 'deviceType' => '<string>', ], // ... ], 'memory' => '<string>', 'taskRoleArn' => '<string>', ], 'propagateTags' => 'TASK_DEFINITION|SERVICE|NONE', 'referenceId' => '<string>', 'startedBy' => '<string>', 'tags' => [ [ 'key' => '<string>', 'value' => '<string>', ], // ... ], 'taskDefinition' => '<string>', // REQUIRED 'volumeConfigurations' => [ [ 'managedEBSVolume' => [ 'encrypted' => true || false, 'filesystemType' => 'ext3|ext4|xfs|ntfs', 'iops' => <integer>, 'kmsKeyId' => '<string>', 'roleArn' => '<string>', // REQUIRED 'sizeInGiB' => <integer>, 'snapshotId' => '<string>', 'tagSpecifications' => [ [ 'propagateTags' => 'TASK_DEFINITION|SERVICE|NONE', 'resourceType' => 'volume', // REQUIRED 'tags' => [ [ 'key' => '<string>', 'value' => '<string>', ], // ... ], ], // ... ], 'terminationPolicy' => [ 'deleteOnTermination' => true || false, // REQUIRED ], 'throughput' => <integer>, 'volumeType' => '<string>', ], 'name' => '<string>', // REQUIRED ], // ... ], ]);
Parameter Details
Members
- cluster
-
- Type: string
The short name or full Amazon Resource Name (ARN) of the cluster where to start your task. If you do not specify a cluster, the default cluster is assumed.
- containerInstances
-
- Required: Yes
- Type: Array of strings
The container instance IDs or full ARN entries for the container instances where you would like to place your task. You can specify up to 10 container instances.
- enableECSManagedTags
-
- Type: boolean
Specifies whether to use Amazon ECS managed tags for the task. For more information, see Tagging Your Amazon ECS Resources in the Amazon Elastic Container Service Developer Guide.
- enableExecuteCommand
-
- Type: boolean
Whether or not the execute command functionality is turned on for the task. If
true
, this turns on the execute command functionality on all containers in the task. - group
-
- Type: string
The name of the task group to associate with the task. The default value is the family name of the task definition (for example, family:my-family-name).
- networkConfiguration
-
- Type: NetworkConfiguration structure
The VPC subnet and security group configuration for tasks that receive their own elastic network interface by using the
awsvpc
networking mode. - overrides
-
- Type: TaskOverride structure
A list of container overrides in JSON format that specify the name of a container in the specified task definition and the overrides it receives. You can override the default command for a container (that's specified in the task definition or Docker image) with a
command
override. You can also override existing environment variables (that are specified in the task definition or Docker image) on a container or add new environment variables to it with anenvironment
override.A total of 8192 characters are allowed for overrides. This limit includes the JSON formatting characters of the override structure.
- propagateTags
-
- Type: string
Specifies whether to propagate the tags from the task definition or the service to the task. If no value is specified, the tags aren't propagated.
- referenceId
-
- Type: string
This parameter is only used by Amazon ECS. It is not intended for use by customers.
- startedBy
-
- Type: string
An optional tag specified when a task is started. For example, if you automatically trigger a task to run a batch process job, you could apply a unique identifier for that job to your task with the
startedBy
parameter. You can then identify which tasks belong to that job by filtering the results of a ListTasks call with thestartedBy
value. Up to 36 letters (uppercase and lowercase), numbers, hyphens (-), forward slash (/), and underscores (_) are allowed.If a task is started by an Amazon ECS service, the
startedBy
parameter contains the deployment ID of the service that starts it. - tags
-
- Type: Array of Tag structures
The metadata that you apply to the task to help you categorize and organize them. Each tag consists of a key and an optional value, both of which you define.
The following basic restrictions apply to tags:
-
Maximum number of tags per resource - 50
-
For each resource, each tag key must be unique, and each tag key can have only one value.
-
Maximum key length - 128 Unicode characters in UTF-8
-
Maximum value length - 256 Unicode characters in UTF-8
-
If your tagging schema is used across multiple services and resources, remember that other services may have restrictions on allowed characters. Generally allowed characters are: letters, numbers, and spaces representable in UTF-8, and the following characters: + - = . _ : / @.
-
Tag keys and values are case-sensitive.
-
Do not use
aws:
,AWS:
, or any upper or lowercase combination of such as a prefix for either keys or values as it is reserved for Amazon Web Services use. You cannot edit or delete tag keys or values with this prefix. Tags with this prefix do not count against your tags per resource limit.
- taskDefinition
-
- Required: Yes
- Type: string
The
family
andrevision
(family:revision
) or full ARN of the task definition to start. If arevision
isn't specified, the latestACTIVE
revision is used. - volumeConfigurations
-
- Type: Array of TaskVolumeConfiguration structures
The details of the volume that was
configuredAtLaunch
. You can configure the size, volumeType, IOPS, throughput, snapshot and encryption in TaskManagedEBSVolumeConfiguration. Thename
of the volume must match thename
from the task definition.
Result Syntax
[ 'failures' => [ [ 'arn' => '<string>', 'detail' => '<string>', 'reason' => '<string>', ], // ... ], 'tasks' => [ [ 'attachments' => [ [ 'details' => [ [ 'name' => '<string>', 'value' => '<string>', ], // ... ], 'id' => '<string>', 'status' => '<string>', 'type' => '<string>', ], // ... ], 'attributes' => [ [ 'name' => '<string>', 'targetId' => '<string>', 'targetType' => 'container-instance', 'value' => '<string>', ], // ... ], 'availabilityZone' => '<string>', 'capacityProviderName' => '<string>', 'clusterArn' => '<string>', 'connectivity' => 'CONNECTED|DISCONNECTED', 'connectivityAt' => <DateTime>, 'containerInstanceArn' => '<string>', 'containers' => [ [ 'containerArn' => '<string>', 'cpu' => '<string>', 'exitCode' => <integer>, 'gpuIds' => ['<string>', ...], 'healthStatus' => 'HEALTHY|UNHEALTHY|UNKNOWN', 'image' => '<string>', 'imageDigest' => '<string>', 'lastStatus' => '<string>', 'managedAgents' => [ [ 'lastStartedAt' => <DateTime>, 'lastStatus' => '<string>', 'name' => 'ExecuteCommandAgent', 'reason' => '<string>', ], // ... ], 'memory' => '<string>', 'memoryReservation' => '<string>', 'name' => '<string>', 'networkBindings' => [ [ 'bindIP' => '<string>', 'containerPort' => <integer>, 'containerPortRange' => '<string>', 'hostPort' => <integer>, 'hostPortRange' => '<string>', 'protocol' => 'tcp|udp', ], // ... ], 'networkInterfaces' => [ [ 'attachmentId' => '<string>', 'ipv6Address' => '<string>', 'privateIpv4Address' => '<string>', ], // ... ], 'reason' => '<string>', 'runtimeId' => '<string>', 'taskArn' => '<string>', ], // ... ], 'cpu' => '<string>', 'createdAt' => <DateTime>, 'desiredStatus' => '<string>', 'enableExecuteCommand' => true || false, 'ephemeralStorage' => [ 'sizeInGiB' => <integer>, ], 'executionStoppedAt' => <DateTime>, 'fargateEphemeralStorage' => [ 'kmsKeyId' => '<string>', 'sizeInGiB' => <integer>, ], 'group' => '<string>', 'healthStatus' => 'HEALTHY|UNHEALTHY|UNKNOWN', 'inferenceAccelerators' => [ [ 'deviceName' => '<string>', 'deviceType' => '<string>', ], // ... ], 'lastStatus' => '<string>', 'launchType' => 'EC2|FARGATE|EXTERNAL', 'memory' => '<string>', 'overrides' => [ 'containerOverrides' => [ [ 'command' => ['<string>', ...], 'cpu' => <integer>, 'environment' => [ [ 'name' => '<string>', 'value' => '<string>', ], // ... ], 'environmentFiles' => [ [ 'type' => 's3', 'value' => '<string>', ], // ... ], 'memory' => <integer>, 'memoryReservation' => <integer>, 'name' => '<string>', 'resourceRequirements' => [ [ 'type' => 'GPU|InferenceAccelerator', 'value' => '<string>', ], // ... ], ], // ... ], 'cpu' => '<string>', 'ephemeralStorage' => [ 'sizeInGiB' => <integer>, ], 'executionRoleArn' => '<string>', 'inferenceAcceleratorOverrides' => [ [ 'deviceName' => '<string>', 'deviceType' => '<string>', ], // ... ], 'memory' => '<string>', 'taskRoleArn' => '<string>', ], 'platformFamily' => '<string>', 'platformVersion' => '<string>', 'pullStartedAt' => <DateTime>, 'pullStoppedAt' => <DateTime>, 'startedAt' => <DateTime>, 'startedBy' => '<string>', 'stopCode' => 'TaskFailedToStart|EssentialContainerExited|UserInitiated|ServiceSchedulerInitiated|SpotInterruption|TerminationNotice', 'stoppedAt' => <DateTime>, 'stoppedReason' => '<string>', 'stoppingAt' => <DateTime>, 'tags' => [ [ 'key' => '<string>', 'value' => '<string>', ], // ... ], 'taskArn' => '<string>', 'taskDefinitionArn' => '<string>', 'version' => <integer>, ], // ... ], ]
Result Details
Members
Errors
- ServerException:
These errors are usually caused by a server issue.
- ClientException:
These errors are usually caused by a client action. This client action might be using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be specifying an identifier that isn't valid.
The following list includes additional causes for the error:
-
The
RunTask
could not be processed because you use managed scaling and there is a capacity error because the quota of tasks in thePROVISIONING
per cluster has been reached. For information about the service quotas, see Amazon ECS service quotas.
-
- InvalidParameterException:
The specified parameter isn't valid. Review the available parameters for the API request.
- ClusterNotFoundException:
The specified cluster wasn't found. You can view your available clusters with ListClusters. Amazon ECS clusters are Region specific.
- UnsupportedFeatureException:
The specified task isn't supported in this Region.
StopTask
$result = $client->stopTask
([/* ... */]); $promise = $client->stopTaskAsync
([/* ... */]);
Stops a running task. Any tags associated with the task will be deleted.
When you call StopTask
on a task, the equivalent of docker stop
is issued to the containers running in the task. This results in a SIGTERM
value and a default 30-second timeout, after which the SIGKILL
value is sent and the containers are forcibly stopped. If the container handles the SIGTERM
value gracefully and exits within 30 seconds from receiving it, no SIGKILL
value is sent.
For Windows containers, POSIX signals do not work and runtime stops the container by sending a CTRL_SHUTDOWN_EVENT
. For more information, see Unable to react to graceful shutdown of (Windows) container #25982 on GitHub.
The default 30-second timeout can be configured on the Amazon ECS container agent with the ECS_CONTAINER_STOP_TIMEOUT
variable. For more information, see Amazon ECS Container Agent Configuration in the Amazon Elastic Container Service Developer Guide.
Parameter Syntax
$result = $client->stopTask([ 'cluster' => '<string>', 'reason' => '<string>', 'task' => '<string>', // REQUIRED ]);
Parameter Details
Members
- cluster
-
- Type: string
The short name or full Amazon Resource Name (ARN) of the cluster that hosts the task to stop. If you do not specify a cluster, the default cluster is assumed.
- reason
-
- Type: string
An optional message specified when a task is stopped. For example, if you're using a custom scheduler, you can use this parameter to specify the reason for stopping the task here, and the message appears in subsequent DescribeTasks> API operations on this task.
- task
-
- Required: Yes
- Type: string
The task ID of the task to stop.
Result Syntax
[ 'task' => [ 'attachments' => [ [ 'details' => [ [ 'name' => '<string>', 'value' => '<string>', ], // ... ], 'id' => '<string>', 'status' => '<string>', 'type' => '<string>', ], // ... ], 'attributes' => [ [ 'name' => '<string>', 'targetId' => '<string>', 'targetType' => 'container-instance', 'value' => '<string>', ], // ... ], 'availabilityZone' => '<string>', 'capacityProviderName' => '<string>', 'clusterArn' => '<string>', 'connectivity' => 'CONNECTED|DISCONNECTED', 'connectivityAt' => <DateTime>, 'containerInstanceArn' => '<string>', 'containers' => [ [ 'containerArn' => '<string>', 'cpu' => '<string>', 'exitCode' => <integer>, 'gpuIds' => ['<string>', ...], 'healthStatus' => 'HEALTHY|UNHEALTHY|UNKNOWN', 'image' => '<string>', 'imageDigest' => '<string>', 'lastStatus' => '<string>', 'managedAgents' => [ [ 'lastStartedAt' => <DateTime>, 'lastStatus' => '<string>', 'name' => 'ExecuteCommandAgent', 'reason' => '<string>', ], // ... ], 'memory' => '<string>', 'memoryReservation' => '<string>', 'name' => '<string>', 'networkBindings' => [ [ 'bindIP' => '<string>', 'containerPort' => <integer>, 'containerPortRange' => '<string>', 'hostPort' => <integer>, 'hostPortRange' => '<string>', 'protocol' => 'tcp|udp', ], // ... ], 'networkInterfaces' => [ [ 'attachmentId' => '<string>', 'ipv6Address' => '<string>', 'privateIpv4Address' => '<string>', ], // ... ], 'reason' => '<string>', 'runtimeId' => '<string>', 'taskArn' => '<string>', ], // ... ], 'cpu' => '<string>', 'createdAt' => <DateTime>, 'desiredStatus' => '<string>', 'enableExecuteCommand' => true || false, 'ephemeralStorage' => [ 'sizeInGiB' => <integer>, ], 'executionStoppedAt' => <DateTime>, 'fargateEphemeralStorage' => [ 'kmsKeyId' => '<string>', 'sizeInGiB' => <integer>, ], 'group' => '<string>', 'healthStatus' => 'HEALTHY|UNHEALTHY|UNKNOWN', 'inferenceAccelerators' => [ [ 'deviceName' => '<string>', 'deviceType' => '<string>', ], // ... ], 'lastStatus' => '<string>', 'launchType' => 'EC2|FARGATE|EXTERNAL', 'memory' => '<string>', 'overrides' => [ 'containerOverrides' => [ [ 'command' => ['<string>', ...], 'cpu' => <integer>, 'environment' => [ [ 'name' => '<string>', 'value' => '<string>', ], // ... ], 'environmentFiles' => [ [ 'type' => 's3', 'value' => '<string>', ], // ... ], 'memory' => <integer>, 'memoryReservation' => <integer>, 'name' => '<string>', 'resourceRequirements' => [ [ 'type' => 'GPU|InferenceAccelerator', 'value' => '<string>', ], // ... ], ], // ... ], 'cpu' => '<string>', 'ephemeralStorage' => [ 'sizeInGiB' => <integer>, ], 'executionRoleArn' => '<string>', 'inferenceAcceleratorOverrides' => [ [ 'deviceName' => '<string>', 'deviceType' => '<string>', ], // ... ], 'memory' => '<string>', 'taskRoleArn' => '<string>', ], 'platformFamily' => '<string>', 'platformVersion' => '<string>', 'pullStartedAt' => <DateTime>, 'pullStoppedAt' => <DateTime>, 'startedAt' => <DateTime>, 'startedBy' => '<string>', 'stopCode' => 'TaskFailedToStart|EssentialContainerExited|UserInitiated|ServiceSchedulerInitiated|SpotInterruption|TerminationNotice', 'stoppedAt' => <DateTime>, 'stoppedReason' => '<string>', 'stoppingAt' => <DateTime>, 'tags' => [ [ 'key' => '<string>', 'value' => '<string>', ], // ... ], 'taskArn' => '<string>', 'taskDefinitionArn' => '<string>', 'version' => <integer>, ], ]
Result Details
Members
- task
-
- Type: Task structure
The task that was stopped.
Errors
- ServerException:
These errors are usually caused by a server issue.
- ClientException:
These errors are usually caused by a client action. This client action might be using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be specifying an identifier that isn't valid.
The following list includes additional causes for the error:
-
The
RunTask
could not be processed because you use managed scaling and there is a capacity error because the quota of tasks in thePROVISIONING
per cluster has been reached. For information about the service quotas, see Amazon ECS service quotas.
-
- InvalidParameterException:
The specified parameter isn't valid. Review the available parameters for the API request.
- ClusterNotFoundException:
The specified cluster wasn't found. You can view your available clusters with ListClusters. Amazon ECS clusters are Region specific.
SubmitAttachmentStateChanges
$result = $client->submitAttachmentStateChanges
([/* ... */]); $promise = $client->submitAttachmentStateChangesAsync
([/* ... */]);
This action is only used by the Amazon ECS agent, and it is not intended for use outside of the agent.
Sent to acknowledge that an attachment changed states.
Parameter Syntax
$result = $client->submitAttachmentStateChanges([ 'attachments' => [ // REQUIRED [ 'attachmentArn' => '<string>', // REQUIRED 'status' => '<string>', // REQUIRED ], // ... ], 'cluster' => '<string>', ]);
Parameter Details
Members
- attachments
-
- Required: Yes
- Type: Array of AttachmentStateChange structures
Any attachments associated with the state change request.
- cluster
-
- Type: string
The short name or full ARN of the cluster that hosts the container instance the attachment belongs to.
Result Syntax
[ 'acknowledgment' => '<string>', ]
Result Details
Members
- acknowledgment
-
- Type: string
Acknowledgement of the state change.
Errors
- ServerException:
These errors are usually caused by a server issue.
- ClientException:
These errors are usually caused by a client action. This client action might be using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be specifying an identifier that isn't valid.
The following list includes additional causes for the error:
-
The
RunTask
could not be processed because you use managed scaling and there is a capacity error because the quota of tasks in thePROVISIONING
per cluster has been reached. For information about the service quotas, see Amazon ECS service quotas.
-
- AccessDeniedException:
You don't have authorization to perform the requested action.
- InvalidParameterException:
The specified parameter isn't valid. Review the available parameters for the API request.
SubmitContainerStateChange
$result = $client->submitContainerStateChange
([/* ... */]); $promise = $client->submitContainerStateChangeAsync
([/* ... */]);
This action is only used by the Amazon ECS agent, and it is not intended for use outside of the agent.
Sent to acknowledge that a container changed states.
Parameter Syntax
$result = $client->submitContainerStateChange([ 'cluster' => '<string>', 'containerName' => '<string>', 'exitCode' => <integer>, 'networkBindings' => [ [ 'bindIP' => '<string>', 'containerPort' => <integer>, 'containerPortRange' => '<string>', 'hostPort' => <integer>, 'hostPortRange' => '<string>', 'protocol' => 'tcp|udp', ], // ... ], 'reason' => '<string>', 'runtimeId' => '<string>', 'status' => '<string>', 'task' => '<string>', ]);
Parameter Details
Members
- cluster
-
- Type: string
The short name or full ARN of the cluster that hosts the container.
- containerName
-
- Type: string
The name of the container.
- exitCode
-
- Type: int
The exit code that's returned for the state change request.
- networkBindings
-
- Type: Array of NetworkBinding structures
The network bindings of the container.
- reason
-
- Type: string
The reason for the state change request.
- runtimeId
-
- Type: string
The ID of the Docker container.
- status
-
- Type: string
The status of the state change request.
- task
-
- Type: string
The task ID or full Amazon Resource Name (ARN) of the task that hosts the container.
Result Syntax
[ 'acknowledgment' => '<string>', ]
Result Details
Members
- acknowledgment
-
- Type: string
Acknowledgement of the state change.
Errors
- ServerException:
These errors are usually caused by a server issue.
- ClientException:
These errors are usually caused by a client action. This client action might be using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be specifying an identifier that isn't valid.
The following list includes additional causes for the error:
-
The
RunTask
could not be processed because you use managed scaling and there is a capacity error because the quota of tasks in thePROVISIONING
per cluster has been reached. For information about the service quotas, see Amazon ECS service quotas.
-
- AccessDeniedException:
You don't have authorization to perform the requested action.
SubmitTaskStateChange
$result = $client->submitTaskStateChange
([/* ... */]); $promise = $client->submitTaskStateChangeAsync
([/* ... */]);
This action is only used by the Amazon ECS agent, and it is not intended for use outside of the agent.
Sent to acknowledge that a task changed states.
Parameter Syntax
$result = $client->submitTaskStateChange([ 'attachments' => [ [ 'attachmentArn' => '<string>', // REQUIRED 'status' => '<string>', // REQUIRED ], // ... ], 'cluster' => '<string>', 'containers' => [ [ 'containerName' => '<string>', 'exitCode' => <integer>, 'imageDigest' => '<string>', 'networkBindings' => [ [ 'bindIP' => '<string>', 'containerPort' => <integer>, 'containerPortRange' => '<string>', 'hostPort' => <integer>, 'hostPortRange' => '<string>', 'protocol' => 'tcp|udp', ], // ... ], 'reason' => '<string>', 'runtimeId' => '<string>', 'status' => '<string>', ], // ... ], 'executionStoppedAt' => <integer || string || DateTime>, 'managedAgents' => [ [ 'containerName' => '<string>', // REQUIRED 'managedAgentName' => 'ExecuteCommandAgent', // REQUIRED 'reason' => '<string>', 'status' => '<string>', // REQUIRED ], // ... ], 'pullStartedAt' => <integer || string || DateTime>, 'pullStoppedAt' => <integer || string || DateTime>, 'reason' => '<string>', 'status' => '<string>', 'task' => '<string>', ]);
Parameter Details
Members
- attachments
-
- Type: Array of AttachmentStateChange structures
Any attachments associated with the state change request.
- cluster
-
- Type: string
The short name or full Amazon Resource Name (ARN) of the cluster that hosts the task.
- containers
-
- Type: Array of ContainerStateChange structures
Any containers that's associated with the state change request.
- executionStoppedAt
-
- Type: timestamp (string|DateTime or anything parsable by strtotime)
The Unix timestamp for the time when the task execution stopped.
- managedAgents
-
- Type: Array of ManagedAgentStateChange structures
The details for the managed agent that's associated with the task.
- pullStartedAt
-
- Type: timestamp (string|DateTime or anything parsable by strtotime)
The Unix timestamp for the time when the container image pull started.
- pullStoppedAt
-
- Type: timestamp (string|DateTime or anything parsable by strtotime)
The Unix timestamp for the time when the container image pull completed.
- reason
-
- Type: string
The reason for the state change request.
- status
-
- Type: string
The status of the state change request.
- task
-
- Type: string
The task ID or full ARN of the task in the state change request.
Result Syntax
[ 'acknowledgment' => '<string>', ]
Result Details
Members
- acknowledgment
-
- Type: string
Acknowledgement of the state change.
Errors
- ServerException:
These errors are usually caused by a server issue.
- ClientException:
These errors are usually caused by a client action. This client action might be using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be specifying an identifier that isn't valid.
The following list includes additional causes for the error:
-
The
RunTask
could not be processed because you use managed scaling and there is a capacity error because the quota of tasks in thePROVISIONING
per cluster has been reached. For information about the service quotas, see Amazon ECS service quotas.
-
- AccessDeniedException:
You don't have authorization to perform the requested action.
- InvalidParameterException:
The specified parameter isn't valid. Review the available parameters for the API request.
TagResource
$result = $client->tagResource
([/* ... */]); $promise = $client->tagResourceAsync
([/* ... */]);
Associates the specified tags to a resource with the specified resourceArn
. If existing tags on a resource aren't specified in the request parameters, they aren't changed. When a resource is deleted, the tags that are associated with that resource are deleted as well.
Parameter Syntax
$result = $client->tagResource([ 'resourceArn' => '<string>', // REQUIRED 'tags' => [ // REQUIRED [ 'key' => '<string>', 'value' => '<string>', ], // ... ], ]);
Parameter Details
Members
- resourceArn
-
- Required: Yes
- Type: string
The Amazon Resource Name (ARN) of the resource to add tags to. Currently, the supported resources are Amazon ECS capacity providers, tasks, services, task definitions, clusters, and container instances.
- tags
-
- Required: Yes
- Type: Array of Tag structures
The tags to add to the resource. A tag is an array of key-value pairs.
The following basic restrictions apply to tags:
-
Maximum number of tags per resource - 50
-
For each resource, each tag key must be unique, and each tag key can have only one value.
-
Maximum key length - 128 Unicode characters in UTF-8
-
Maximum value length - 256 Unicode characters in UTF-8
-
If your tagging schema is used across multiple services and resources, remember that other services may have restrictions on allowed characters. Generally allowed characters are: letters, numbers, and spaces representable in UTF-8, and the following characters: + - = . _ : / @.
-
Tag keys and values are case-sensitive.
-
Do not use
aws:
,AWS:
, or any upper or lowercase combination of such as a prefix for either keys or values as it is reserved for Amazon Web Services use. You cannot edit or delete tag keys or values with this prefix. Tags with this prefix do not count against your tags per resource limit.
Result Syntax
[]
Result Details
Errors
- ServerException:
These errors are usually caused by a server issue.
- ClientException:
These errors are usually caused by a client action. This client action might be using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be specifying an identifier that isn't valid.
The following list includes additional causes for the error:
-
The
RunTask
could not be processed because you use managed scaling and there is a capacity error because the quota of tasks in thePROVISIONING
per cluster has been reached. For information about the service quotas, see Amazon ECS service quotas.
-
- ClusterNotFoundException:
The specified cluster wasn't found. You can view your available clusters with ListClusters. Amazon ECS clusters are Region specific.
- ResourceNotFoundException:
The specified resource wasn't found.
- InvalidParameterException:
The specified parameter isn't valid. Review the available parameters for the API request.
Examples
Example 1: To tag a cluster.
This example tags the 'dev' cluster with key 'team' and value 'dev'.
$result = $client->tagResource([ 'resourceArn' => 'arn:aws:ecs:region:aws_account_id:cluster/dev', 'tags' => [ [ 'key' => 'team', 'value' => 'dev', ], ], ]);
Result syntax:
[ ]
UntagResource
$result = $client->untagResource
([/* ... */]); $promise = $client->untagResourceAsync
([/* ... */]);
Deletes specified tags from a resource.
Parameter Syntax
$result = $client->untagResource([ 'resourceArn' => '<string>', // REQUIRED 'tagKeys' => ['<string>', ...], // REQUIRED ]);
Parameter Details
Members
- resourceArn
-
- Required: Yes
- Type: string
The Amazon Resource Name (ARN) of the resource to delete tags from. Currently, the supported resources are Amazon ECS capacity providers, tasks, services, task definitions, clusters, and container instances.
- tagKeys
-
- Required: Yes
- Type: Array of strings
The keys of the tags to be removed.
Result Syntax
[]
Result Details
Errors
- ServerException:
These errors are usually caused by a server issue.
- ClientException:
These errors are usually caused by a client action. This client action might be using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be specifying an identifier that isn't valid.
The following list includes additional causes for the error:
-
The
RunTask
could not be processed because you use managed scaling and there is a capacity error because the quota of tasks in thePROVISIONING
per cluster has been reached. For information about the service quotas, see Amazon ECS service quotas.
-
- ClusterNotFoundException:
The specified cluster wasn't found. You can view your available clusters with ListClusters. Amazon ECS clusters are Region specific.
- ResourceNotFoundException:
The specified resource wasn't found.
- InvalidParameterException:
The specified parameter isn't valid. Review the available parameters for the API request.
Examples
Example 1: To untag a cluster.
This example deletes the 'team' tag from the 'dev' cluster.
$result = $client->untagResource([ 'resourceArn' => 'arn:aws:ecs:region:aws_account_id:cluster/dev', 'tagKeys' => [ 'team', ], ]);
Result syntax:
[ ]
UpdateCapacityProvider
$result = $client->updateCapacityProvider
([/* ... */]); $promise = $client->updateCapacityProviderAsync
([/* ... */]);
Modifies the parameters for a capacity provider.
Parameter Syntax
$result = $client->updateCapacityProvider([ 'autoScalingGroupProvider' => [ // REQUIRED 'managedDraining' => 'ENABLED|DISABLED', 'managedScaling' => [ 'instanceWarmupPeriod' => <integer>, 'maximumScalingStepSize' => <integer>, 'minimumScalingStepSize' => <integer>, 'status' => 'ENABLED|DISABLED', 'targetCapacity' => <integer>, ], 'managedTerminationProtection' => 'ENABLED|DISABLED', ], 'name' => '<string>', // REQUIRED ]);
Parameter Details
Members
- autoScalingGroupProvider
-
- Required: Yes
- Type: AutoScalingGroupProviderUpdate structure
An object that represent the parameters to update for the Auto Scaling group capacity provider.
- name
-
- Required: Yes
- Type: string
The name of the capacity provider to update.
Result Syntax
[ 'capacityProvider' => [ 'autoScalingGroupProvider' => [ 'autoScalingGroupArn' => '<string>', 'managedDraining' => 'ENABLED|DISABLED', 'managedScaling' => [ 'instanceWarmupPeriod' => <integer>, 'maximumScalingStepSize' => <integer>, 'minimumScalingStepSize' => <integer>, 'status' => 'ENABLED|DISABLED', 'targetCapacity' => <integer>, ], 'managedTerminationProtection' => 'ENABLED|DISABLED', ], 'capacityProviderArn' => '<string>', 'name' => '<string>', 'status' => 'ACTIVE|INACTIVE', 'tags' => [ [ 'key' => '<string>', 'value' => '<string>', ], // ... ], 'updateStatus' => 'DELETE_IN_PROGRESS|DELETE_COMPLETE|DELETE_FAILED|UPDATE_IN_PROGRESS|UPDATE_COMPLETE|UPDATE_FAILED', 'updateStatusReason' => '<string>', ], ]
Result Details
Members
- capacityProvider
-
- Type: CapacityProvider structure
Details about the capacity provider.
Errors
- ServerException:
These errors are usually caused by a server issue.
- ClientException:
These errors are usually caused by a client action. This client action might be using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be specifying an identifier that isn't valid.
The following list includes additional causes for the error:
-
The
RunTask
could not be processed because you use managed scaling and there is a capacity error because the quota of tasks in thePROVISIONING
per cluster has been reached. For information about the service quotas, see Amazon ECS service quotas.
-
- InvalidParameterException:
The specified parameter isn't valid. Review the available parameters for the API request.
UpdateCluster
$result = $client->updateCluster
([/* ... */]); $promise = $client->updateClusterAsync
([/* ... */]);
Updates the cluster.
Parameter Syntax
$result = $client->updateCluster([ 'cluster' => '<string>', // REQUIRED 'configuration' => [ 'executeCommandConfiguration' => [ 'kmsKeyId' => '<string>', 'logConfiguration' => [ 'cloudWatchEncryptionEnabled' => true || false, 'cloudWatchLogGroupName' => '<string>', 's3BucketName' => '<string>', 's3EncryptionEnabled' => true || false, 's3KeyPrefix' => '<string>', ], 'logging' => 'NONE|DEFAULT|OVERRIDE', ], 'managedStorageConfiguration' => [ 'fargateEphemeralStorageKmsKeyId' => '<string>', 'kmsKeyId' => '<string>', ], ], 'serviceConnectDefaults' => [ 'namespace' => '<string>', // REQUIRED ], 'settings' => [ [ 'name' => 'containerInsights', 'value' => '<string>', ], // ... ], ]);
Parameter Details
Members
- cluster
-
- Required: Yes
- Type: string
The name of the cluster to modify the settings for.
- configuration
-
- Type: ClusterConfiguration structure
The execute command configuration for the cluster.
- serviceConnectDefaults
-
- Type: ClusterServiceConnectDefaultsRequest structure
Use this parameter to set a default Service Connect namespace. After you set a default Service Connect namespace, any new services with Service Connect turned on that are created in the cluster are added as client services in the namespace. This setting only applies to new services that set the
enabled
parameter totrue
in theServiceConnectConfiguration
. You can set the namespace of each service individually in theServiceConnectConfiguration
to override this default parameter.Tasks that run in a namespace can use short names to connect to services in the namespace. Tasks can connect to services across all of the clusters in the namespace. Tasks connect through a managed proxy container that collects logs and metrics for increased visibility. Only the tasks that Amazon ECS services create are supported with Service Connect. For more information, see Service Connect in the Amazon Elastic Container Service Developer Guide.
- settings
-
- Type: Array of ClusterSetting structures
The cluster settings for your cluster.
Result Syntax
[ 'cluster' => [ 'activeServicesCount' => <integer>, 'attachments' => [ [ 'details' => [ [ 'name' => '<string>', 'value' => '<string>', ], // ... ], 'id' => '<string>', 'status' => '<string>', 'type' => '<string>', ], // ... ], 'attachmentsStatus' => '<string>', 'capacityProviders' => ['<string>', ...], 'clusterArn' => '<string>', 'clusterName' => '<string>', 'configuration' => [ 'executeCommandConfiguration' => [ 'kmsKeyId' => '<string>', 'logConfiguration' => [ 'cloudWatchEncryptionEnabled' => true || false, 'cloudWatchLogGroupName' => '<string>', 's3BucketName' => '<string>', 's3EncryptionEnabled' => true || false, 's3KeyPrefix' => '<string>', ], 'logging' => 'NONE|DEFAULT|OVERRIDE', ], 'managedStorageConfiguration' => [ 'fargateEphemeralStorageKmsKeyId' => '<string>', 'kmsKeyId' => '<string>', ], ], 'defaultCapacityProviderStrategy' => [ [ 'base' => <integer>, 'capacityProvider' => '<string>', 'weight' => <integer>, ], // ... ], 'pendingTasksCount' => <integer>, 'registeredContainerInstancesCount' => <integer>, 'runningTasksCount' => <integer>, 'serviceConnectDefaults' => [ 'namespace' => '<string>', ], 'settings' => [ [ 'name' => 'containerInsights', 'value' => '<string>', ], // ... ], 'statistics' => [ [ 'name' => '<string>', 'value' => '<string>', ], // ... ], 'status' => '<string>', 'tags' => [ [ 'key' => '<string>', 'value' => '<string>', ], // ... ], ], ]
Result Details
Members
- cluster
-
- Type: Cluster structure
Details about the cluster.
Errors
- ServerException:
These errors are usually caused by a server issue.
- ClientException:
These errors are usually caused by a client action. This client action might be using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be specifying an identifier that isn't valid.
The following list includes additional causes for the error:
-
The
RunTask
could not be processed because you use managed scaling and there is a capacity error because the quota of tasks in thePROVISIONING
per cluster has been reached. For information about the service quotas, see Amazon ECS service quotas.
-
- ClusterNotFoundException:
The specified cluster wasn't found. You can view your available clusters with ListClusters. Amazon ECS clusters are Region specific.
- InvalidParameterException:
The specified parameter isn't valid. Review the available parameters for the API request.
- NamespaceNotFoundException:
The specified namespace wasn't found.
UpdateClusterSettings
$result = $client->updateClusterSettings
([/* ... */]); $promise = $client->updateClusterSettingsAsync
([/* ... */]);
Modifies the settings to use for a cluster.
Parameter Syntax
$result = $client->updateClusterSettings([ 'cluster' => '<string>', // REQUIRED 'settings' => [ // REQUIRED [ 'name' => 'containerInsights', 'value' => '<string>', ], // ... ], ]);
Parameter Details
Members
- cluster
-
- Required: Yes
- Type: string
The name of the cluster to modify the settings for.
- settings
-
- Required: Yes
- Type: Array of ClusterSetting structures
The setting to use by default for a cluster. This parameter is used to turn on CloudWatch Container Insights for a cluster. If this value is specified, it overrides the
containerInsights
value set with PutAccountSetting or PutAccountSettingDefault.Currently, if you delete an existing cluster that does not have Container Insights turned on, and then create a new cluster with the same name with Container Insights tuned on, Container Insights will not actually be turned on. If you want to preserve the same name for your existing cluster and turn on Container Insights, you must wait 7 days before you can re-create it.
Result Syntax
[ 'cluster' => [ 'activeServicesCount' => <integer>, 'attachments' => [ [ 'details' => [ [ 'name' => '<string>', 'value' => '<string>', ], // ... ], 'id' => '<string>', 'status' => '<string>', 'type' => '<string>', ], // ... ], 'attachmentsStatus' => '<string>', 'capacityProviders' => ['<string>', ...], 'clusterArn' => '<string>', 'clusterName' => '<string>', 'configuration' => [ 'executeCommandConfiguration' => [ 'kmsKeyId' => '<string>', 'logConfiguration' => [ 'cloudWatchEncryptionEnabled' => true || false, 'cloudWatchLogGroupName' => '<string>', 's3BucketName' => '<string>', 's3EncryptionEnabled' => true || false, 's3KeyPrefix' => '<string>', ], 'logging' => 'NONE|DEFAULT|OVERRIDE', ], 'managedStorageConfiguration' => [ 'fargateEphemeralStorageKmsKeyId' => '<string>', 'kmsKeyId' => '<string>', ], ], 'defaultCapacityProviderStrategy' => [ [ 'base' => <integer>, 'capacityProvider' => '<string>', 'weight' => <integer>, ], // ... ], 'pendingTasksCount' => <integer>, 'registeredContainerInstancesCount' => <integer>, 'runningTasksCount' => <integer>, 'serviceConnectDefaults' => [ 'namespace' => '<string>', ], 'settings' => [ [ 'name' => 'containerInsights', 'value' => '<string>', ], // ... ], 'statistics' => [ [ 'name' => '<string>', 'value' => '<string>', ], // ... ], 'status' => '<string>', 'tags' => [ [ 'key' => '<string>', 'value' => '<string>', ], // ... ], ], ]
Result Details
Members
- cluster
-
- Type: Cluster structure
Details about the cluster
Errors
- ServerException:
These errors are usually caused by a server issue.
- ClientException:
These errors are usually caused by a client action. This client action might be using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be specifying an identifier that isn't valid.
The following list includes additional causes for the error:
-
The
RunTask
could not be processed because you use managed scaling and there is a capacity error because the quota of tasks in thePROVISIONING
per cluster has been reached. For information about the service quotas, see Amazon ECS service quotas.
-
- ClusterNotFoundException:
The specified cluster wasn't found. You can view your available clusters with ListClusters. Amazon ECS clusters are Region specific.
- InvalidParameterException:
The specified parameter isn't valid. Review the available parameters for the API request.
UpdateContainerAgent
$result = $client->updateContainerAgent
([/* ... */]); $promise = $client->updateContainerAgentAsync
([/* ... */]);
Updates the Amazon ECS container agent on a specified container instance. Updating the Amazon ECS container agent doesn't interrupt running tasks or services on the container instance. The process for updating the agent differs depending on whether your container instance was launched with the Amazon ECS-optimized AMI or another operating system.
The UpdateContainerAgent
API isn't supported for container instances using the Amazon ECS-optimized Amazon Linux 2 (arm64) AMI. To update the container agent, you can update the ecs-init
package. This updates the agent. For more information, see Updating the Amazon ECS container agent in the Amazon Elastic Container Service Developer Guide.
Agent updates with the UpdateContainerAgent
API operation do not apply to Windows container instances. We recommend that you launch new container instances to update the agent version in your Windows clusters.
The UpdateContainerAgent
API requires an Amazon ECS-optimized AMI or Amazon Linux AMI with the ecs-init
service installed and running. For help updating the Amazon ECS container agent on other operating systems, see Manually updating the Amazon ECS container agent in the Amazon Elastic Container Service Developer Guide.
Parameter Syntax
$result = $client->updateContainerAgent([ 'cluster' => '<string>', 'containerInstance' => '<string>', // REQUIRED ]);
Parameter Details
Members
- cluster
-
- Type: string
The short name or full Amazon Resource Name (ARN) of the cluster that your container instance is running on. If you do not specify a cluster, the default cluster is assumed.
- containerInstance
-
- Required: Yes
- Type: string
The container instance ID or full ARN entries for the container instance where you would like to update the Amazon ECS container agent.
Result Syntax
[ 'containerInstance' => [ 'agentConnected' => true || false, 'agentUpdateStatus' => 'PENDING|STAGING|STAGED|UPDATING|UPDATED|FAILED', 'attachments' => [ [ 'details' => [ [ 'name' => '<string>', 'value' => '<string>', ], // ... ], 'id' => '<string>', 'status' => '<string>', 'type' => '<string>', ], // ... ], 'attributes' => [ [ 'name' => '<string>', 'targetId' => '<string>', 'targetType' => 'container-instance', 'value' => '<string>', ], // ... ], 'capacityProviderName' => '<string>', 'containerInstanceArn' => '<string>', 'ec2InstanceId' => '<string>', 'healthStatus' => [ 'details' => [ [ 'lastStatusChange' => <DateTime>, 'lastUpdated' => <DateTime>, 'status' => 'OK|IMPAIRED|INSUFFICIENT_DATA|INITIALIZING', 'type' => 'CONTAINER_RUNTIME', ], // ... ], 'overallStatus' => 'OK|IMPAIRED|INSUFFICIENT_DATA|INITIALIZING', ], 'pendingTasksCount' => <integer>, 'registeredAt' => <DateTime>, 'registeredResources' => [ [ 'doubleValue' => <float>, 'integerValue' => <integer>, 'longValue' => <integer>, 'name' => '<string>', 'stringSetValue' => ['<string>', ...], 'type' => '<string>', ], // ... ], 'remainingResources' => [ [ 'doubleValue' => <float>, 'integerValue' => <integer>, 'longValue' => <integer>, 'name' => '<string>', 'stringSetValue' => ['<string>', ...], 'type' => '<string>', ], // ... ], 'runningTasksCount' => <integer>, 'status' => '<string>', 'statusReason' => '<string>', 'tags' => [ [ 'key' => '<string>', 'value' => '<string>', ], // ... ], 'version' => <integer>, 'versionInfo' => [ 'agentHash' => '<string>', 'agentVersion' => '<string>', 'dockerVersion' => '<string>', ], ], ]
Result Details
Members
- containerInstance
-
- Type: ContainerInstance structure
The container instance that the container agent was updated for.
Errors
- ServerException:
These errors are usually caused by a server issue.
- ClientException:
These errors are usually caused by a client action. This client action might be using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be specifying an identifier that isn't valid.
The following list includes additional causes for the error:
-
The
RunTask
could not be processed because you use managed scaling and there is a capacity error because the quota of tasks in thePROVISIONING
per cluster has been reached. For information about the service quotas, see Amazon ECS service quotas.
-
- InvalidParameterException:
The specified parameter isn't valid. Review the available parameters for the API request.
- ClusterNotFoundException:
The specified cluster wasn't found. You can view your available clusters with ListClusters. Amazon ECS clusters are Region specific.
- UpdateInProgressException:
There's already a current Amazon ECS container agent update in progress on the container instance that's specified. If the container agent becomes disconnected while it's in a transitional stage, such as
PENDING
orSTAGING
, the update process can get stuck in that state. However, when the agent reconnects, it resumes where it stopped previously.- NoUpdateAvailableException:
There's no update available for this Amazon ECS container agent. This might be because the agent is already running the latest version or because it's so old that there's no update path to the current version.
- MissingVersionException:
Amazon ECS can't determine the current version of the Amazon ECS container agent on the container instance and doesn't have enough information to proceed with an update. This could be because the agent running on the container instance is a previous or custom version that doesn't use our version information.
UpdateContainerInstancesState
$result = $client->updateContainerInstancesState
([/* ... */]); $promise = $client->updateContainerInstancesStateAsync
([/* ... */]);
Modifies the status of an Amazon ECS container instance.
Once a container instance has reached an ACTIVE
state, you can change the status of a container instance to DRAINING
to manually remove an instance from a cluster, for example to perform system updates, update the Docker daemon, or scale down the cluster size.
A container instance can't be changed to DRAINING
until it has reached an ACTIVE
status. If the instance is in any other status, an error will be received.
When you set a container instance to DRAINING
, Amazon ECS prevents new tasks from being scheduled for placement on the container instance and replacement service tasks are started on other container instances in the cluster if the resources are available. Service tasks on the container instance that are in the PENDING
state are stopped immediately.
Service tasks on the container instance that are in the RUNNING
state are stopped and replaced according to the service's deployment configuration parameters, minimumHealthyPercent
and maximumPercent
. You can change the deployment configuration of your service using UpdateService.
-
If
minimumHealthyPercent
is below 100%, the scheduler can ignoredesiredCount
temporarily during task replacement. For example,desiredCount
is four tasks, a minimum of 50% allows the scheduler to stop two existing tasks before starting two new tasks. If the minimum is 100%, the service scheduler can't remove existing tasks until the replacement tasks are considered healthy. Tasks for services that do not use a load balancer are considered healthy if they're in theRUNNING
state. Tasks for services that use a load balancer are considered healthy if they're in theRUNNING
state and are reported as healthy by the load balancer. -
The
maximumPercent
parameter represents an upper limit on the number of running tasks during task replacement. You can use this to define the replacement batch size. For example, ifdesiredCount
is four tasks, a maximum of 200% starts four new tasks before stopping the four tasks to be drained, provided that the cluster resources required to do this are available. If the maximum is 100%, then replacement tasks can't start until the draining tasks have stopped.
Any PENDING
or RUNNING
tasks that do not belong to a service aren't affected. You must wait for them to finish or stop them manually.
A container instance has completed draining when it has no more RUNNING
tasks. You can verify this using ListTasks.
When a container instance has been drained, you can set a container instance to ACTIVE
status and once it has reached that status the Amazon ECS scheduler can begin scheduling tasks on the instance again.
Parameter Syntax
$result = $client->updateContainerInstancesState([ 'cluster' => '<string>', 'containerInstances' => ['<string>', ...], // REQUIRED 'status' => 'ACTIVE|DRAINING|REGISTERING|DEREGISTERING|REGISTRATION_FAILED', // REQUIRED ]);
Parameter Details
Members
- cluster
-
- Type: string
The short name or full Amazon Resource Name (ARN) of the cluster that hosts the container instance to update. If you do not specify a cluster, the default cluster is assumed.
- containerInstances
-
- Required: Yes
- Type: Array of strings
A list of up to 10 container instance IDs or full ARN entries.
- status
-
- Required: Yes
- Type: string
The container instance state to update the container instance with. The only valid values for this action are
ACTIVE
andDRAINING
. A container instance can only be updated toDRAINING
status once it has reached anACTIVE
state. If a container instance is inREGISTERING
,DEREGISTERING
, orREGISTRATION_FAILED
state you can describe the container instance but can't update the container instance state.
Result Syntax
[ 'containerInstances' => [ [ 'agentConnected' => true || false, 'agentUpdateStatus' => 'PENDING|STAGING|STAGED|UPDATING|UPDATED|FAILED', 'attachments' => [ [ 'details' => [ [ 'name' => '<string>', 'value' => '<string>', ], // ... ], 'id' => '<string>', 'status' => '<string>', 'type' => '<string>', ], // ... ], 'attributes' => [ [ 'name' => '<string>', 'targetId' => '<string>', 'targetType' => 'container-instance', 'value' => '<string>', ], // ... ], 'capacityProviderName' => '<string>', 'containerInstanceArn' => '<string>', 'ec2InstanceId' => '<string>', 'healthStatus' => [ 'details' => [ [ 'lastStatusChange' => <DateTime>, 'lastUpdated' => <DateTime>, 'status' => 'OK|IMPAIRED|INSUFFICIENT_DATA|INITIALIZING', 'type' => 'CONTAINER_RUNTIME', ], // ... ], 'overallStatus' => 'OK|IMPAIRED|INSUFFICIENT_DATA|INITIALIZING', ], 'pendingTasksCount' => <integer>, 'registeredAt' => <DateTime>, 'registeredResources' => [ [ 'doubleValue' => <float>, 'integerValue' => <integer>, 'longValue' => <integer>, 'name' => '<string>', 'stringSetValue' => ['<string>', ...], 'type' => '<string>', ], // ... ], 'remainingResources' => [ [ 'doubleValue' => <float>, 'integerValue' => <integer>, 'longValue' => <integer>, 'name' => '<string>', 'stringSetValue' => ['<string>', ...], 'type' => '<string>', ], // ... ], 'runningTasksCount' => <integer>, 'status' => '<string>', 'statusReason' => '<string>', 'tags' => [ [ 'key' => '<string>', 'value' => '<string>', ], // ... ], 'version' => <integer>, 'versionInfo' => [ 'agentHash' => '<string>', 'agentVersion' => '<string>', 'dockerVersion' => '<string>', ], ], // ... ], 'failures' => [ [ 'arn' => '<string>', 'detail' => '<string>', 'reason' => '<string>', ], // ... ], ]
Result Details
Members
- containerInstances
-
- Type: Array of ContainerInstance structures
The list of container instances.
- failures
-
- Type: Array of Failure structures
Any failures associated with the call.
Errors
- ServerException:
These errors are usually caused by a server issue.
- ClientException:
These errors are usually caused by a client action. This client action might be using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be specifying an identifier that isn't valid.
The following list includes additional causes for the error:
-
The
RunTask
could not be processed because you use managed scaling and there is a capacity error because the quota of tasks in thePROVISIONING
per cluster has been reached. For information about the service quotas, see Amazon ECS service quotas.
-
- InvalidParameterException:
The specified parameter isn't valid. Review the available parameters for the API request.
- ClusterNotFoundException:
The specified cluster wasn't found. You can view your available clusters with ListClusters. Amazon ECS clusters are Region specific.
UpdateService
$result = $client->updateService
([/* ... */]); $promise = $client->updateServiceAsync
([/* ... */]);
Modifies the parameters of a service.
On March 21, 2024, a change was made to resolve the task definition revision before authorization. When a task definition revision is not specified, authorization will occur using the latest revision of a task definition.
For services using the rolling update (ECS
) you can update the desired count, deployment configuration, network configuration, load balancers, service registries, enable ECS managed tags option, propagate tags option, task placement constraints and strategies, and task definition. When you update any of these parameters, Amazon ECS starts new tasks with the new configuration.
You can attach Amazon EBS volumes to Amazon ECS tasks by configuring the volume when starting or running a task, or when creating or updating a service. For more infomation, see Amazon EBS volumes in the Amazon Elastic Container Service Developer Guide. You can update your volume configurations and trigger a new deployment. volumeConfigurations
is only supported for REPLICA service and not DAEMON service. If you leave volumeConfigurations
null
, it doesn't trigger a new deployment. For more infomation on volumes, see Amazon EBS volumes in the Amazon Elastic Container Service Developer Guide.
For services using the blue/green (CODE_DEPLOY
) deployment controller, only the desired count, deployment configuration, health check grace period, task placement constraints and strategies, enable ECS managed tags option, and propagate tags can be updated using this API. If the network configuration, platform version, task definition, or load balancer need to be updated, create a new CodeDeploy deployment. For more information, see CreateDeployment in the CodeDeploy API Reference.
For services using an external deployment controller, you can update only the desired count, task placement constraints and strategies, health check grace period, enable ECS managed tags option, and propagate tags option, using this API. If the launch type, load balancer, network configuration, platform version, or task definition need to be updated, create a new task set For more information, see CreateTaskSet.
You can add to or subtract from the number of instantiations of a task definition in a service by specifying the cluster that the service is running in and a new desiredCount
parameter.
You can attach Amazon EBS volumes to Amazon ECS tasks by configuring the volume when starting or running a task, or when creating or updating a service. For more infomation, see Amazon EBS volumes in the Amazon Elastic Container Service Developer Guide.
If you have updated the container image of your application, you can create a new task definition with that image and deploy it to your service. The service scheduler uses the minimum healthy percent and maximum percent parameters (in the service's deployment configuration) to determine the deployment strategy.
If your updated Docker image uses the same tag as what is in the existing task definition for your service (for example, my_image:latest
), you don't need to create a new revision of your task definition. You can update the service using the forceNewDeployment
option. The new tasks launched by the deployment pull the current image/tag combination from your repository when they start.
You can also update the deployment configuration of a service. When a deployment is triggered by updating the task definition of a service, the service scheduler uses the deployment configuration parameters, minimumHealthyPercent
and maximumPercent
, to determine the deployment strategy.
-
If
minimumHealthyPercent
is below 100%, the scheduler can ignoredesiredCount
temporarily during a deployment. For example, ifdesiredCount
is four tasks, a minimum of 50% allows the scheduler to stop two existing tasks before starting two new tasks. Tasks for services that don't use a load balancer are considered healthy if they're in theRUNNING
state. Tasks for services that use a load balancer are considered healthy if they're in theRUNNING
state and are reported as healthy by the load balancer. -
The
maximumPercent
parameter represents an upper limit on the number of running tasks during a deployment. You can use it to define the deployment batch size. For example, ifdesiredCount
is four tasks, a maximum of 200% starts four new tasks before stopping the four older tasks (provided that the cluster resources required to do this are available).
When UpdateService stops a task during a deployment, the equivalent of docker stop
is issued to the containers running in the task. This results in a SIGTERM
and a 30-second timeout. After this, SIGKILL
is sent and the containers are forcibly stopped. If the container handles the SIGTERM
gracefully and exits within 30 seconds from receiving it, no SIGKILL
is sent.
When the service scheduler launches new tasks, it determines task placement in your cluster with the following logic.
-
Determine which of the container instances in your cluster can support your service's task definition. For example, they have the required CPU, memory, ports, and container instance attributes.
-
By default, the service scheduler attempts to balance tasks across Availability Zones in this manner even though you can choose a different placement strategy.
-
Sort the valid container instances by the fewest number of running tasks for this service in the same Availability Zone as the instance. For example, if zone A has one running service task and zones B and C each have zero, valid container instances in either zone B or C are considered optimal for placement.
-
Place the new service task on a valid container instance in an optimal Availability Zone (based on the previous steps), favoring container instances with the fewest number of running tasks for this service.
-
When the service scheduler stops running tasks, it attempts to maintain balance across the Availability Zones in your cluster using the following logic:
-
Sort the container instances by the largest number of running tasks for this service in the same Availability Zone as the instance. For example, if zone A has one running service task and zones B and C each have two, container instances in either zone B or C are considered optimal for termination.
-
Stop the task on a container instance in an optimal Availability Zone (based on the previous steps), favoring container instances with the largest number of running tasks for this service.
You must have a service-linked role when you update any of the following service properties:
-
loadBalancers
, -
serviceRegistries
For more information about the role see the CreateService
request parameter role
.
Parameter Syntax
$result = $client->updateService([ 'capacityProviderStrategy' => [ [ 'base' => <integer>, 'capacityProvider' => '<string>', // REQUIRED 'weight' => <integer>, ], // ... ], 'cluster' => '<string>', 'deploymentConfiguration' => [ 'alarms' => [ 'alarmNames' => ['<string>', ...], // REQUIRED 'enable' => true || false, // REQUIRED 'rollback' => true || false, // REQUIRED ], 'deploymentCircuitBreaker' => [ 'enable' => true || false, // REQUIRED 'rollback' => true || false, // REQUIRED ], 'maximumPercent' => <integer>, 'minimumHealthyPercent' => <integer>, ], 'desiredCount' => <integer>, 'enableECSManagedTags' => true || false, 'enableExecuteCommand' => true || false, 'forceNewDeployment' => true || false, 'healthCheckGracePeriodSeconds' => <integer>, 'loadBalancers' => [ [ 'containerName' => '<string>', 'containerPort' => <integer>, 'loadBalancerName' => '<string>', 'targetGroupArn' => '<string>', ], // ... ], 'networkConfiguration' => [ 'awsvpcConfiguration' => [ 'assignPublicIp' => 'ENABLED|DISABLED', 'securityGroups' => ['<string>', ...], 'subnets' => ['<string>', ...], // REQUIRED ], ], 'placementConstraints' => [ [ 'expression' => '<string>', 'type' => 'distinctInstance|memberOf', ], // ... ], 'placementStrategy' => [ [ 'field' => '<string>', 'type' => 'random|spread|binpack', ], // ... ], 'platformVersion' => '<string>', 'propagateTags' => 'TASK_DEFINITION|SERVICE|NONE', 'service' => '<string>', // REQUIRED 'serviceConnectConfiguration' => [ 'enabled' => true || false, // REQUIRED 'logConfiguration' => [ 'logDriver' => 'json-file|syslog|journald|gelf|fluentd|awslogs|splunk|awsfirelens', // REQUIRED 'options' => ['<string>', ...], 'secretOptions' => [ [ 'name' => '<string>', // REQUIRED 'valueFrom' => '<string>', // REQUIRED ], // ... ], ], 'namespace' => '<string>', 'services' => [ [ 'clientAliases' => [ [ 'dnsName' => '<string>', 'port' => <integer>, // REQUIRED ], // ... ], 'discoveryName' => '<string>', 'ingressPortOverride' => <integer>, 'portName' => '<string>', // REQUIRED 'timeout' => [ 'idleTimeoutSeconds' => <integer>, 'perRequestTimeoutSeconds' => <integer>, ], 'tls' => [ 'issuerCertificateAuthority' => [ // REQUIRED 'awsPcaAuthorityArn' => '<string>', ], 'kmsKey' => '<string>', 'roleArn' => '<string>', ], ], // ... ], ], 'serviceRegistries' => [ [ 'containerName' => '<string>', 'containerPort' => <integer>, 'port' => <integer>, 'registryArn' => '<string>', ], // ... ], 'taskDefinition' => '<string>', 'volumeConfigurations' => [ [ 'managedEBSVolume' => [ 'encrypted' => true || false, 'filesystemType' => 'ext3|ext4|xfs|ntfs', 'iops' => <integer>, 'kmsKeyId' => '<string>', 'roleArn' => '<string>', // REQUIRED 'sizeInGiB' => <integer>, 'snapshotId' => '<string>', 'tagSpecifications' => [ [ 'propagateTags' => 'TASK_DEFINITION|SERVICE|NONE', 'resourceType' => 'volume', // REQUIRED 'tags' => [ [ 'key' => '<string>', 'value' => '<string>', ], // ... ], ], // ... ], 'throughput' => <integer>, 'volumeType' => '<string>', ], 'name' => '<string>', // REQUIRED ], // ... ], ]);
Parameter Details
Members
- capacityProviderStrategy
-
- Type: Array of CapacityProviderStrategyItem structures
The capacity provider strategy to update the service to use.
if the service uses the default capacity provider strategy for the cluster, the service can be updated to use one or more capacity providers as opposed to the default capacity provider strategy. However, when a service is using a capacity provider strategy that's not the default capacity provider strategy, the service can't be updated to use the cluster's default capacity provider strategy.
A capacity provider strategy consists of one or more capacity providers along with the
base
andweight
to assign to them. A capacity provider must be associated with the cluster to be used in a capacity provider strategy. The PutClusterCapacityProviders API is used to associate a capacity provider with a cluster. Only capacity providers with anACTIVE
orUPDATING
status can be used.If specifying a capacity provider that uses an Auto Scaling group, the capacity provider must already be created. New capacity providers can be created with the CreateClusterCapacityProvider API operation.
To use a Fargate capacity provider, specify either the
FARGATE
orFARGATE_SPOT
capacity providers. The Fargate capacity providers are available to all accounts and only need to be associated with a cluster to be used.The PutClusterCapacityProvidersAPI operation is used to update the list of available capacity providers for a cluster after the cluster is created.
- cluster
-
- Type: string
The short name or full Amazon Resource Name (ARN) of the cluster that your service runs on. If you do not specify a cluster, the default cluster is assumed.
- deploymentConfiguration
-
- Type: DeploymentConfiguration structure
Optional deployment parameters that control how many tasks run during the deployment and the failure detection methods.
- desiredCount
-
- Type: int
The number of instantiations of the task to place and keep running in your service.
- enableECSManagedTags
-
- Type: boolean
Determines whether to turn on Amazon ECS managed tags for the tasks in the service. For more information, see Tagging Your Amazon ECS Resources in the Amazon Elastic Container Service Developer Guide.
Only tasks launched after the update will reflect the update. To update the tags on all tasks, set
forceNewDeployment
totrue
, so that Amazon ECS starts new tasks with the updated tags. - enableExecuteCommand
-
- Type: boolean
If
true
, this enables execute command functionality on all task containers.If you do not want to override the value that was set when the service was created, you can set this to
null
when performing this action. - forceNewDeployment
-
- Type: boolean
Determines whether to force a new deployment of the service. By default, deployments aren't forced. You can use this option to start a new deployment with no service definition changes. For example, you can update a service's tasks to use a newer Docker image with the same image/tag combination (
my_image:latest
) or to roll Fargate tasks onto a newer platform version. - healthCheckGracePeriodSeconds
-
- Type: int
The period of time, in seconds, that the Amazon ECS service scheduler ignores unhealthy Elastic Load Balancing target health checks after a task has first started. This is only valid if your service is configured to use a load balancer. If your service's tasks take a while to start and respond to Elastic Load Balancing health checks, you can specify a health check grace period of up to 2,147,483,647 seconds. During that time, the Amazon ECS service scheduler ignores the Elastic Load Balancing health check status. This grace period can prevent the ECS service scheduler from marking tasks as unhealthy and stopping them before they have time to come up.
- loadBalancers
-
- Type: Array of LoadBalancer structures
A list of Elastic Load Balancing load balancer objects. It contains the load balancer name, the container name, and the container port to access from the load balancer. The container name is as it appears in a container definition.
When you add, update, or remove a load balancer configuration, Amazon ECS starts new tasks with the updated Elastic Load Balancing configuration, and then stops the old tasks when the new tasks are running.
For services that use rolling updates, you can add, update, or remove Elastic Load Balancing target groups. You can update from a single target group to multiple target groups and from multiple target groups to a single target group.
For services that use blue/green deployments, you can update Elastic Load Balancing target groups by using
CreateDeployment
through CodeDeploy. Note that multiple target groups are not supported for blue/green deployments. For more information see Register multiple target groups with a service in the Amazon Elastic Container Service Developer Guide.For services that use the external deployment controller, you can add, update, or remove load balancers by using CreateTaskSet. Note that multiple target groups are not supported for external deployments. For more information see Register multiple target groups with a service in the Amazon Elastic Container Service Developer Guide.
You can remove existing
loadBalancers
by passing an empty list. - networkConfiguration
-
- Type: NetworkConfiguration structure
An object representing the network configuration for the service.
- placementConstraints
-
- Type: Array of PlacementConstraint structures
An array of task placement constraint objects to update the service to use. If no value is specified, the existing placement constraints for the service will remain unchanged. If this value is specified, it will override any existing placement constraints defined for the service. To remove all existing placement constraints, specify an empty array.
You can specify a maximum of 10 constraints for each task. This limit includes constraints in the task definition and those specified at runtime.
- placementStrategy
-
- Type: Array of PlacementStrategy structures
The task placement strategy objects to update the service to use. If no value is specified, the existing placement strategy for the service will remain unchanged. If this value is specified, it will override the existing placement strategy defined for the service. To remove an existing placement strategy, specify an empty object.
You can specify a maximum of five strategy rules for each service.
- platformVersion
-
- Type: string
The platform version that your tasks in the service run on. A platform version is only specified for tasks using the Fargate launch type. If a platform version is not specified, the
LATEST
platform version is used. For more information, see Fargate Platform Versions in the Amazon Elastic Container Service Developer Guide. - propagateTags
-
- Type: string
Determines whether to propagate the tags from the task definition or the service to the task. If no value is specified, the tags aren't propagated.
Only tasks launched after the update will reflect the update. To update the tags on all tasks, set
forceNewDeployment
totrue
, so that Amazon ECS starts new tasks with the updated tags. - service
-
- Required: Yes
- Type: string
The name of the service to update.
- serviceConnectConfiguration
-
- Type: ServiceConnectConfiguration structure
The configuration for this service to discover and connect to services, and be discovered by, and connected from, other services within a namespace.
Tasks that run in a namespace can use short names to connect to services in the namespace. Tasks can connect to services across all of the clusters in the namespace. Tasks connect through a managed proxy container that collects logs and metrics for increased visibility. Only the tasks that Amazon ECS services create are supported with Service Connect. For more information, see Service Connect in the Amazon Elastic Container Service Developer Guide.
- serviceRegistries
-
- Type: Array of ServiceRegistry structures
The details for the service discovery registries to assign to this service. For more information, see Service Discovery.
When you add, update, or remove the service registries configuration, Amazon ECS starts new tasks with the updated service registries configuration, and then stops the old tasks when the new tasks are running.
You can remove existing
serviceRegistries
by passing an empty list. - taskDefinition
-
- Type: string
The
family
andrevision
(family:revision
) or full ARN of the task definition to run in your service. If arevision
is not specified, the latestACTIVE
revision is used. If you modify the task definition withUpdateService
, Amazon ECS spawns a task with the new version of the task definition and then stops an old task after the new version is running. - volumeConfigurations
-
- Type: Array of ServiceVolumeConfiguration structures
The details of the volume that was
configuredAtLaunch
. You can configure the size, volumeType, IOPS, throughput, snapshot and encryption in ServiceManagedEBSVolumeConfiguration. Thename
of the volume must match thename
from the task definition. If set to null, no new deployment is triggered. Otherwise, if this configuration differs from the existing one, it triggers a new deployment.
Result Syntax
[ 'service' => [ 'capacityProviderStrategy' => [ [ 'base' => <integer>, 'capacityProvider' => '<string>', 'weight' => <integer>, ], // ... ], 'clusterArn' => '<string>', 'createdAt' => <DateTime>, 'createdBy' => '<string>', 'deploymentConfiguration' => [ 'alarms' => [ 'alarmNames' => ['<string>', ...], 'enable' => true || false, 'rollback' => true || false, ], 'deploymentCircuitBreaker' => [ 'enable' => true || false, 'rollback' => true || false, ], 'maximumPercent' => <integer>, 'minimumHealthyPercent' => <integer>, ], 'deploymentController' => [ 'type' => 'ECS|CODE_DEPLOY|EXTERNAL', ], 'deployments' => [ [ 'capacityProviderStrategy' => [ [ 'base' => <integer>, 'capacityProvider' => '<string>', 'weight' => <integer>, ], // ... ], 'createdAt' => <DateTime>, 'desiredCount' => <integer>, 'failedTasks' => <integer>, 'fargateEphemeralStorage' => [ 'kmsKeyId' => '<string>', ], 'id' => '<string>', 'launchType' => 'EC2|FARGATE|EXTERNAL', 'networkConfiguration' => [ 'awsvpcConfiguration' => [ 'assignPublicIp' => 'ENABLED|DISABLED', 'securityGroups' => ['<string>', ...], 'subnets' => ['<string>', ...], ], ], 'pendingCount' => <integer>, 'platformFamily' => '<string>', 'platformVersion' => '<string>', 'rolloutState' => 'COMPLETED|FAILED|IN_PROGRESS', 'rolloutStateReason' => '<string>', 'runningCount' => <integer>, 'serviceConnectConfiguration' => [ 'enabled' => true || false, 'logConfiguration' => [ 'logDriver' => 'json-file|syslog|journald|gelf|fluentd|awslogs|splunk|awsfirelens', 'options' => ['<string>', ...], 'secretOptions' => [ [ 'name' => '<string>', 'valueFrom' => '<string>', ], // ... ], ], 'namespace' => '<string>', 'services' => [ [ 'clientAliases' => [ [ 'dnsName' => '<string>', 'port' => <integer>, ], // ... ], 'discoveryName' => '<string>', 'ingressPortOverride' => <integer>, 'portName' => '<string>', 'timeout' => [ 'idleTimeoutSeconds' => <integer>, 'perRequestTimeoutSeconds' => <integer>, ], 'tls' => [ 'issuerCertificateAuthority' => [ 'awsPcaAuthorityArn' => '<string>', ], 'kmsKey' => '<string>', 'roleArn' => '<string>', ], ], // ... ], ], 'serviceConnectResources' => [ [ 'discoveryArn' => '<string>', 'discoveryName' => '<string>', ], // ... ], 'status' => '<string>', 'taskDefinition' => '<string>', 'updatedAt' => <DateTime>, 'volumeConfigurations' => [ [ 'managedEBSVolume' => [ 'encrypted' => true || false, 'filesystemType' => 'ext3|ext4|xfs|ntfs', 'iops' => <integer>, 'kmsKeyId' => '<string>', 'roleArn' => '<string>', 'sizeInGiB' => <integer>, 'snapshotId' => '<string>', 'tagSpecifications' => [ [ 'propagateTags' => 'TASK_DEFINITION|SERVICE|NONE', 'resourceType' => 'volume', 'tags' => [ [ 'key' => '<string>', 'value' => '<string>', ], // ... ], ], // ... ], 'throughput' => <integer>, 'volumeType' => '<string>', ], 'name' => '<string>', ], // ... ], ], // ... ], 'desiredCount' => <integer>, 'enableECSManagedTags' => true || false, 'enableExecuteCommand' => true || false, 'events' => [ [ 'createdAt' => <DateTime>, 'id' => '<string>', 'message' => '<string>', ], // ... ], 'healthCheckGracePeriodSeconds' => <integer>, 'launchType' => 'EC2|FARGATE|EXTERNAL', 'loadBalancers' => [ [ 'containerName' => '<string>', 'containerPort' => <integer>, 'loadBalancerName' => '<string>', 'targetGroupArn' => '<string>', ], // ... ], 'networkConfiguration' => [ 'awsvpcConfiguration' => [ 'assignPublicIp' => 'ENABLED|DISABLED', 'securityGroups' => ['<string>', ...], 'subnets' => ['<string>', ...], ], ], 'pendingCount' => <integer>, 'placementConstraints' => [ [ 'expression' => '<string>', 'type' => 'distinctInstance|memberOf', ], // ... ], 'placementStrategy' => [ [ 'field' => '<string>', 'type' => 'random|spread|binpack', ], // ... ], 'platformFamily' => '<string>', 'platformVersion' => '<string>', 'propagateTags' => 'TASK_DEFINITION|SERVICE|NONE', 'roleArn' => '<string>', 'runningCount' => <integer>, 'schedulingStrategy' => 'REPLICA|DAEMON', 'serviceArn' => '<string>', 'serviceName' => '<string>', 'serviceRegistries' => [ [ 'containerName' => '<string>', 'containerPort' => <integer>, 'port' => <integer>, 'registryArn' => '<string>', ], // ... ], 'status' => '<string>', 'tags' => [ [ 'key' => '<string>', 'value' => '<string>', ], // ... ], 'taskDefinition' => '<string>', 'taskSets' => [ [ 'capacityProviderStrategy' => [ [ 'base' => <integer>, 'capacityProvider' => '<string>', 'weight' => <integer>, ], // ... ], 'clusterArn' => '<string>', 'computedDesiredCount' => <integer>, 'createdAt' => <DateTime>, 'externalId' => '<string>', 'fargateEphemeralStorage' => [ 'kmsKeyId' => '<string>', ], 'id' => '<string>', 'launchType' => 'EC2|FARGATE|EXTERNAL', 'loadBalancers' => [ [ 'containerName' => '<string>', 'containerPort' => <integer>, 'loadBalancerName' => '<string>', 'targetGroupArn' => '<string>', ], // ... ], 'networkConfiguration' => [ 'awsvpcConfiguration' => [ 'assignPublicIp' => 'ENABLED|DISABLED', 'securityGroups' => ['<string>', ...], 'subnets' => ['<string>', ...], ], ], 'pendingCount' => <integer>, 'platformFamily' => '<string>', 'platformVersion' => '<string>', 'runningCount' => <integer>, 'scale' => [ 'unit' => 'PERCENT', 'value' => <float>, ], 'serviceArn' => '<string>', 'serviceRegistries' => [ [ 'containerName' => '<string>', 'containerPort' => <integer>, 'port' => <integer>, 'registryArn' => '<string>', ], // ... ], 'stabilityStatus' => 'STEADY_STATE|STABILIZING', 'stabilityStatusAt' => <DateTime>, 'startedBy' => '<string>', 'status' => '<string>', 'tags' => [ [ 'key' => '<string>', 'value' => '<string>', ], // ... ], 'taskDefinition' => '<string>', 'taskSetArn' => '<string>', 'updatedAt' => <DateTime>, ], // ... ], ], ]
Result Details
Members
- service
-
- Type: Service structure
The full description of your service following the update call.
Errors
- ServerException:
These errors are usually caused by a server issue.
- ClientException:
These errors are usually caused by a client action. This client action might be using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be specifying an identifier that isn't valid.
The following list includes additional causes for the error:
-
The
RunTask
could not be processed because you use managed scaling and there is a capacity error because the quota of tasks in thePROVISIONING
per cluster has been reached. For information about the service quotas, see Amazon ECS service quotas.
-
- InvalidParameterException:
The specified parameter isn't valid. Review the available parameters for the API request.
- ClusterNotFoundException:
The specified cluster wasn't found. You can view your available clusters with ListClusters. Amazon ECS clusters are Region specific.
- ServiceNotFoundException:
The specified service wasn't found. You can view your available services with ListServices. Amazon ECS services are cluster specific and Region specific.
- ServiceNotActiveException:
The specified service isn't active. You can't update a service that's inactive. If you have previously deleted a service, you can re-create it with CreateService.
- PlatformUnknownException:
The specified platform version doesn't exist.
- PlatformTaskDefinitionIncompatibilityException:
The specified platform version doesn't satisfy the required capabilities of the task definition.
- AccessDeniedException:
You don't have authorization to perform the requested action.
- NamespaceNotFoundException:
The specified namespace wasn't found.
- UnsupportedFeatureException:
The specified task isn't supported in this Region.
Examples
Example 1: To change the task definition used in a service
This example updates the my-http-service service to use the amazon-ecs-sample task definition.
$result = $client->updateService([ 'service' => 'my-http-service', 'taskDefinition' => 'amazon-ecs-sample', ]);
Result syntax:
[ ]
Example 2: To change the number of tasks in a service
This example updates the desired count of the my-http-service service to 10.
$result = $client->updateService([ 'desiredCount' => 10, 'service' => 'my-http-service', ]);
Result syntax:
[ ]
UpdateServicePrimaryTaskSet
$result = $client->updateServicePrimaryTaskSet
([/* ... */]); $promise = $client->updateServicePrimaryTaskSetAsync
([/* ... */]);
Modifies which task set in a service is the primary task set. Any parameters that are updated on the primary task set in a service will transition to the service. This is used when a service uses the EXTERNAL
deployment controller type. For more information, see Amazon ECS Deployment Types in the Amazon Elastic Container Service Developer Guide.
Parameter Syntax
$result = $client->updateServicePrimaryTaskSet([ 'cluster' => '<string>', // REQUIRED 'primaryTaskSet' => '<string>', // REQUIRED 'service' => '<string>', // REQUIRED ]);
Parameter Details
Members
- cluster
-
- Required: Yes
- Type: string
The short name or full Amazon Resource Name (ARN) of the cluster that hosts the service that the task set exists in.
- primaryTaskSet
-
- Required: Yes
- Type: string
The short name or full Amazon Resource Name (ARN) of the task set to set as the primary task set in the deployment.
- service
-
- Required: Yes
- Type: string
The short name or full Amazon Resource Name (ARN) of the service that the task set exists in.
Result Syntax
[ 'taskSet' => [ 'capacityProviderStrategy' => [ [ 'base' => <integer>, 'capacityProvider' => '<string>', 'weight' => <integer>, ], // ... ], 'clusterArn' => '<string>', 'computedDesiredCount' => <integer>, 'createdAt' => <DateTime>, 'externalId' => '<string>', 'fargateEphemeralStorage' => [ 'kmsKeyId' => '<string>', ], 'id' => '<string>', 'launchType' => 'EC2|FARGATE|EXTERNAL', 'loadBalancers' => [ [ 'containerName' => '<string>', 'containerPort' => <integer>, 'loadBalancerName' => '<string>', 'targetGroupArn' => '<string>', ], // ... ], 'networkConfiguration' => [ 'awsvpcConfiguration' => [ 'assignPublicIp' => 'ENABLED|DISABLED', 'securityGroups' => ['<string>', ...], 'subnets' => ['<string>', ...], ], ], 'pendingCount' => <integer>, 'platformFamily' => '<string>', 'platformVersion' => '<string>', 'runningCount' => <integer>, 'scale' => [ 'unit' => 'PERCENT', 'value' => <float>, ], 'serviceArn' => '<string>', 'serviceRegistries' => [ [ 'containerName' => '<string>', 'containerPort' => <integer>, 'port' => <integer>, 'registryArn' => '<string>', ], // ... ], 'stabilityStatus' => 'STEADY_STATE|STABILIZING', 'stabilityStatusAt' => <DateTime>, 'startedBy' => '<string>', 'status' => '<string>', 'tags' => [ [ 'key' => '<string>', 'value' => '<string>', ], // ... ], 'taskDefinition' => '<string>', 'taskSetArn' => '<string>', 'updatedAt' => <DateTime>, ], ]
Result Details
Members
- taskSet
-
- Type: TaskSet structure
The details about the task set.
Errors
- ServerException:
These errors are usually caused by a server issue.
- ClientException:
These errors are usually caused by a client action. This client action might be using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be specifying an identifier that isn't valid.
The following list includes additional causes for the error:
-
The
RunTask
could not be processed because you use managed scaling and there is a capacity error because the quota of tasks in thePROVISIONING
per cluster has been reached. For information about the service quotas, see Amazon ECS service quotas.
-
- InvalidParameterException:
The specified parameter isn't valid. Review the available parameters for the API request.
- ClusterNotFoundException:
The specified cluster wasn't found. You can view your available clusters with ListClusters. Amazon ECS clusters are Region specific.
- UnsupportedFeatureException:
The specified task isn't supported in this Region.
- ServiceNotFoundException:
The specified service wasn't found. You can view your available services with ListServices. Amazon ECS services are cluster specific and Region specific.
- ServiceNotActiveException:
The specified service isn't active. You can't update a service that's inactive. If you have previously deleted a service, you can re-create it with CreateService.
- TaskSetNotFoundException:
The specified task set wasn't found. You can view your available task sets with DescribeTaskSets. Task sets are specific to each cluster, service and Region.
- AccessDeniedException:
You don't have authorization to perform the requested action.
UpdateTaskProtection
$result = $client->updateTaskProtection
([/* ... */]); $promise = $client->updateTaskProtectionAsync
([/* ... */]);
Updates the protection status of a task. You can set protectionEnabled
to true
to protect your task from termination during scale-in events from Service Autoscaling or deployments.
Task-protection, by default, expires after 2 hours at which point Amazon ECS clears the protectionEnabled
property making the task eligible for termination by a subsequent scale-in event.
You can specify a custom expiration period for task protection from 1 minute to up to 2,880 minutes (48 hours). To specify the custom expiration period, set the expiresInMinutes
property. The expiresInMinutes
property is always reset when you invoke this operation for a task that already has protectionEnabled
set to true
. You can keep extending the protection expiration period of a task by invoking this operation repeatedly.
To learn more about Amazon ECS task protection, see Task scale-in protection in the Amazon Elastic Container Service Developer Guide .
This operation is only supported for tasks belonging to an Amazon ECS service. Invoking this operation for a standalone task will result in an TASK_NOT_VALID
failure. For more information, see API failure reasons.
If you prefer to set task protection from within the container, we recommend using the Task scale-in protection endpoint.
Parameter Syntax
$result = $client->updateTaskProtection([ 'cluster' => '<string>', // REQUIRED 'expiresInMinutes' => <integer>, 'protectionEnabled' => true || false, // REQUIRED 'tasks' => ['<string>', ...], // REQUIRED ]);
Parameter Details
Members
- cluster
-
- Required: Yes
- Type: string
The short name or full Amazon Resource Name (ARN) of the cluster that hosts the service that the task sets exist in.
- expiresInMinutes
-
- Type: int
If you set
protectionEnabled
totrue
, you can specify the duration for task protection in minutes. You can specify a value from 1 minute to up to 2,880 minutes (48 hours). During this time, your task will not be terminated by scale-in events from Service Auto Scaling or deployments. After this time period lapses,protectionEnabled
will be reset tofalse
.If you don’t specify the time, then the task is automatically protected for 120 minutes (2 hours).
- protectionEnabled
-
- Required: Yes
- Type: boolean
Specify
true
to mark a task for protection andfalse
to unset protection, making it eligible for termination. - tasks
-
- Required: Yes
- Type: Array of strings
A list of up to 10 task IDs or full ARN entries.
Result Syntax
[ 'failures' => [ [ 'arn' => '<string>', 'detail' => '<string>', 'reason' => '<string>', ], // ... ], 'protectedTasks' => [ [ 'expirationDate' => <DateTime>, 'protectionEnabled' => true || false, 'taskArn' => '<string>', ], // ... ], ]
Result Details
Members
- failures
-
- Type: Array of Failure structures
Any failures associated with the call.
- protectedTasks
-
- Type: Array of ProtectedTask structures
A list of tasks with the following information.
-
taskArn
: The task ARN. -
protectionEnabled
: The protection status of the task. If scale-in protection is turned on for a task, the value istrue
. Otherwise, it isfalse
. -
expirationDate
: The epoch time when protection for the task will expire.
Errors
- AccessDeniedException:
You don't have authorization to perform the requested action.
- ClientException:
These errors are usually caused by a client action. This client action might be using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be specifying an identifier that isn't valid.
The following list includes additional causes for the error:
-
The
RunTask
could not be processed because you use managed scaling and there is a capacity error because the quota of tasks in thePROVISIONING
per cluster has been reached. For information about the service quotas, see Amazon ECS service quotas.
-
- ClusterNotFoundException:
The specified cluster wasn't found. You can view your available clusters with ListClusters. Amazon ECS clusters are Region specific.
- InvalidParameterException:
The specified parameter isn't valid. Review the available parameters for the API request.
- ResourceNotFoundException:
The specified resource wasn't found.
- ServerException:
These errors are usually caused by a server issue.
- UnsupportedFeatureException:
The specified task isn't supported in this Region.
Examples
Example 1: To set task scale-in protection for a task for 60 minutes
This example enables scale-in protection for a task for 60 minutes.
$result = $client->updateTaskProtection([ 'cluster' => 'test-task-protection', 'expiresInMinutes' => 60, 'protectionEnabled' => 1, 'tasks' => [ 'b8b1cf532d0e46ba8d44a40d1de16772', ], ]);
Result syntax:
[ 'failures' => [ ], 'protectedTasks' => [ [ 'expirationDate' =>, 'protectionEnabled' => 1, 'taskArn' => 'arn:aws:ecs:us-west-2:012345678910:task/default/b8b1cf532d0e46ba8d44a40d1de16772', ], ], ]
Example 2: To set task scale-in protection for the default time period in minutes
This example enables task scale-in protection for a task, without specifying the expiresInMinutes parameter, for the default protection period of 120 minutes.
$result = $client->updateTaskProtection([ 'cluster' => 'test-task-protection', 'protectionEnabled' => 1, 'tasks' => [ 'b8b1cf532d0e46ba8d44a40d1de16772', ], ]);
Result syntax:
[ 'failures' => [ ], 'protectedTasks' => [ [ 'expirationDate' =>, 'protectionEnabled' => 1, 'taskArn' => 'arn:aws:ecs:us-west-2:012345678910:task/default/b8b1cf532d0e46ba8d44a40d1de16772', ], ], ]
Example 3: To remove task scale-in protection
This example removes scale-in protection for a task.
$result = $client->updateTaskProtection([ 'cluster' => 'test-task-protection', 'protectionEnabled' => , 'tasks' => [ 'b8b1cf532d0e46ba8d44a40d1de16772', ], ]);
Result syntax:
[ 'failures' => [ ], 'protectedTasks' => [ [ 'protectionEnabled' => , 'taskArn' => 'arn:aws:ecs:us-west-2:012345678910:task/default/b8b1cf532d0e46ba8d44a40d1de16772', ], ], ]
UpdateTaskSet
$result = $client->updateTaskSet
([/* ... */]); $promise = $client->updateTaskSetAsync
([/* ... */]);
Modifies a task set. This is used when a service uses the EXTERNAL
deployment controller type. For more information, see Amazon ECS Deployment Types in the Amazon Elastic Container Service Developer Guide.
Parameter Syntax
$result = $client->updateTaskSet([ 'cluster' => '<string>', // REQUIRED 'scale' => [ // REQUIRED 'unit' => 'PERCENT', 'value' => <float>, ], 'service' => '<string>', // REQUIRED 'taskSet' => '<string>', // REQUIRED ]);
Parameter Details
Members
- cluster
-
- Required: Yes
- Type: string
The short name or full Amazon Resource Name (ARN) of the cluster that hosts the service that the task set is found in.
- scale
-
- Required: Yes
- Type: Scale structure
A floating-point percentage of the desired number of tasks to place and keep running in the task set.
- service
-
- Required: Yes
- Type: string
The short name or full Amazon Resource Name (ARN) of the service that the task set is found in.
- taskSet
-
- Required: Yes
- Type: string
The short name or full Amazon Resource Name (ARN) of the task set to update.
Result Syntax
[ 'taskSet' => [ 'capacityProviderStrategy' => [ [ 'base' => <integer>, 'capacityProvider' => '<string>', 'weight' => <integer>, ], // ... ], 'clusterArn' => '<string>', 'computedDesiredCount' => <integer>, 'createdAt' => <DateTime>, 'externalId' => '<string>', 'fargateEphemeralStorage' => [ 'kmsKeyId' => '<string>', ], 'id' => '<string>', 'launchType' => 'EC2|FARGATE|EXTERNAL', 'loadBalancers' => [ [ 'containerName' => '<string>', 'containerPort' => <integer>, 'loadBalancerName' => '<string>', 'targetGroupArn' => '<string>', ], // ... ], 'networkConfiguration' => [ 'awsvpcConfiguration' => [ 'assignPublicIp' => 'ENABLED|DISABLED', 'securityGroups' => ['<string>', ...], 'subnets' => ['<string>', ...], ], ], 'pendingCount' => <integer>, 'platformFamily' => '<string>', 'platformVersion' => '<string>', 'runningCount' => <integer>, 'scale' => [ 'unit' => 'PERCENT', 'value' => <float>, ], 'serviceArn' => '<string>', 'serviceRegistries' => [ [ 'containerName' => '<string>', 'containerPort' => <integer>, 'port' => <integer>, 'registryArn' => '<string>', ], // ... ], 'stabilityStatus' => 'STEADY_STATE|STABILIZING', 'stabilityStatusAt' => <DateTime>, 'startedBy' => '<string>', 'status' => '<string>', 'tags' => [ [ 'key' => '<string>', 'value' => '<string>', ], // ... ], 'taskDefinition' => '<string>', 'taskSetArn' => '<string>', 'updatedAt' => <DateTime>, ], ]
Result Details
Members
- taskSet
-
- Type: TaskSet structure
Details about the task set.
Errors
- ServerException:
These errors are usually caused by a server issue.
- ClientException:
These errors are usually caused by a client action. This client action might be using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be specifying an identifier that isn't valid.
The following list includes additional causes for the error:
-
The
RunTask
could not be processed because you use managed scaling and there is a capacity error because the quota of tasks in thePROVISIONING
per cluster has been reached. For information about the service quotas, see Amazon ECS service quotas.
-
- InvalidParameterException:
The specified parameter isn't valid. Review the available parameters for the API request.
- ClusterNotFoundException:
The specified cluster wasn't found. You can view your available clusters with ListClusters. Amazon ECS clusters are Region specific.
- UnsupportedFeatureException:
The specified task isn't supported in this Region.
- AccessDeniedException:
You don't have authorization to perform the requested action.
- ServiceNotFoundException:
The specified service wasn't found. You can view your available services with ListServices. Amazon ECS services are cluster specific and Region specific.
- ServiceNotActiveException:
The specified service isn't active. You can't update a service that's inactive. If you have previously deleted a service, you can re-create it with CreateService.
- TaskSetNotFoundException:
The specified task set wasn't found. You can view your available task sets with DescribeTaskSets. Task sets are specific to each cluster, service and Region.
Shapes
AccessDeniedException
Description
You don't have authorization to perform the requested action.
Members
Attachment
Description
An object representing a container instance or task attachment.
Members
- details
-
- Type: Array of KeyValuePair structures
Details of the attachment.
For elastic network interfaces, this includes the network interface ID, the MAC address, the subnet ID, and the private IPv4 address.
For Service Connect services, this includes
portName
,clientAliases
,discoveryName
, andingressPortOverride
.For Elastic Block Storage, this includes
roleArn
,deleteOnTermination
,volumeName
,volumeId
, andstatusReason
(only when the attachment fails to create or attach). - id
-
- Type: string
The unique identifier for the attachment.
- status
-
- Type: string
The status of the attachment. Valid values are
PRECREATED
,CREATED
,ATTACHING
,ATTACHED
,DETACHING
,DETACHED
,DELETED
, andFAILED
. - type
-
- Type: string
The type of the attachment, such as
ElasticNetworkInterface
,Service Connect
, andAmazonElasticBlockStorage
.
AttachmentStateChange
Description
An object representing a change in state for a task attachment.
Members
- attachmentArn
-
- Required: Yes
- Type: string
The Amazon Resource Name (ARN) of the attachment.
- status
-
- Required: Yes
- Type: string
The status of the attachment.
Attribute
Description
An attribute is a name-value pair that's associated with an Amazon ECS object. Use attributes to extend the Amazon ECS data model by adding custom metadata to your resources. For more information, see Attributes in the Amazon Elastic Container Service Developer Guide.
Members
- name
-
- Required: Yes
- Type: string
The name of the attribute. The
name
must contain between 1 and 128 characters. The name may contain letters (uppercase and lowercase), numbers, hyphens (-), underscores (_), forward slashes (/), back slashes (\), or periods (.). - targetId
-
- Type: string
The ID of the target. You can specify the short form ID for a resource or the full Amazon Resource Name (ARN).
- targetType
-
- Type: string
The type of the target to attach the attribute with. This parameter is required if you use the short form ID for a resource instead of the full ARN.
- value
-
- Type: string
The value of the attribute. The
value
must contain between 1 and 128 characters. It can contain letters (uppercase and lowercase), numbers, hyphens (-), underscores (_), periods (.), at signs (@), forward slashes (/), back slashes (\), colons (:), or spaces. The value can't start or end with a space.
AttributeLimitExceededException
Description
You can apply up to 10 custom attributes for each resource. You can view the attributes of a resource with ListAttributes. You can remove existing attributes on a resource with DeleteAttributes.
Members
AutoScalingGroupProvider
Description
The details of the Auto Scaling group for the capacity provider.
Members
- autoScalingGroupArn
-
- Required: Yes
- Type: string
The Amazon Resource Name (ARN) that identifies the Auto Scaling group, or the Auto Scaling group name.
- managedDraining
-
- Type: string
The managed draining option for the Auto Scaling group capacity provider. When you enable this, Amazon ECS manages and gracefully drains the EC2 container instances that are in the Auto Scaling group capacity provider.
- managedScaling
-
- Type: ManagedScaling structure
The managed scaling settings for the Auto Scaling group capacity provider.
- managedTerminationProtection
-
- Type: string
The managed termination protection setting to use for the Auto Scaling group capacity provider. This determines whether the Auto Scaling group has managed termination protection. The default is off.
When using managed termination protection, managed scaling must also be used otherwise managed termination protection doesn't work.
When managed termination protection is on, Amazon ECS prevents the Amazon EC2 instances in an Auto Scaling group that contain tasks from being terminated during a scale-in action. The Auto Scaling group and each instance in the Auto Scaling group must have instance protection from scale-in actions on as well. For more information, see Instance Protection in the Auto Scaling User Guide.
When managed termination protection is off, your Amazon EC2 instances aren't protected from termination when the Auto Scaling group scales in.
AutoScalingGroupProviderUpdate
Description
The details of the Auto Scaling group capacity provider to update.
Members
- managedDraining
-
- Type: string
The managed draining option for the Auto Scaling group capacity provider. When you enable this, Amazon ECS manages and gracefully drains the EC2 container instances that are in the Auto Scaling group capacity provider.
- managedScaling
-
- Type: ManagedScaling structure
The managed scaling settings for the Auto Scaling group capacity provider.
- managedTerminationProtection
-
- Type: string
The managed termination protection setting to use for the Auto Scaling group capacity provider. This determines whether the Auto Scaling group has managed termination protection.
When using managed termination protection, managed scaling must also be used otherwise managed termination protection doesn't work.
When managed termination protection is on, Amazon ECS prevents the Amazon EC2 instances in an Auto Scaling group that contain tasks from being terminated during a scale-in action. The Auto Scaling group and each instance in the Auto Scaling group must have instance protection from scale-in actions on. For more information, see Instance Protection in the Auto Scaling User Guide.
When managed termination protection is off, your Amazon EC2 instances aren't protected from termination when the Auto Scaling group scales in.
AwsVpcConfiguration
Description
An object representing the networking details for a task or service. For example awsVpcConfiguration={subnets=["subnet-12344321"],securityGroups=["sg-12344321"]}
.
Members
- assignPublicIp
-
- Type: string
Whether the task's elastic network interface receives a public IP address. The default value is
DISABLED
. - securityGroups
-
- Type: Array of strings
The IDs of the security groups associated with the task or service. If you don't specify a security group, the default security group for the VPC is used. There's a limit of 5 security groups that can be specified per
awsvpcConfiguration
.All specified security groups must be from the same VPC.
- subnets
-
- Required: Yes
- Type: Array of strings
The IDs of the subnets associated with the task or service. There's a limit of 16 subnets that can be specified per
awsvpcConfiguration
.All specified subnets must be from the same VPC.
BlockedException
Description
Your Amazon Web Services account was blocked. For more information, contact Amazon Web Services Support.
Members
CapacityProvider
Description
The details for a capacity provider.
Members
- autoScalingGroupProvider
-
- Type: AutoScalingGroupProvider structure
The Auto Scaling group settings for the capacity provider.
- capacityProviderArn
-
- Type: string
The Amazon Resource Name (ARN) that identifies the capacity provider.
- name
-
- Type: string
The name of the capacity provider.
- status
-
- Type: string
The current status of the capacity provider. Only capacity providers in an
ACTIVE
state can be used in a cluster. When a capacity provider is successfully deleted, it has anINACTIVE
status. - tags
-
- Type: Array of Tag structures
The metadata that you apply to the capacity provider to help you categorize and organize it. Each tag consists of a key and an optional value. You define both.
The following basic restrictions apply to tags:
-
Maximum number of tags per resource - 50
-
For each resource, each tag key must be unique, and each tag key can have only one value.
-
Maximum key length - 128 Unicode characters in UTF-8
-
Maximum value length - 256 Unicode characters in UTF-8
-
If your tagging schema is used across multiple services and resources, remember that other services may have restrictions on allowed characters. Generally allowed characters are: letters, numbers, and spaces representable in UTF-8, and the following characters: + - = . _ : / @.
-
Tag keys and values are case-sensitive.
-
Do not use
aws:
,AWS:
, or any upper or lowercase combination of such as a prefix for either keys or values as it is reserved for Amazon Web Services use. You cannot edit or delete tag keys or values with this prefix. Tags with this prefix do not count against your tags per resource limit.
- updateStatus
-
- Type: string
The update status of the capacity provider. The following are the possible states that is returned.
- DELETE_IN_PROGRESS
-
The capacity provider is in the process of being deleted.
- DELETE_COMPLETE
-
The capacity provider was successfully deleted and has an
INACTIVE
status. - DELETE_FAILED
-
The capacity provider can't be deleted. The update status reason provides further details about why the delete failed.
- updateStatusReason
-
- Type: string
The update status reason. This provides further details about the update status for the capacity provider.
CapacityProviderStrategyItem
Description
The details of a capacity provider strategy. A capacity provider strategy can be set when using the RunTaskor CreateCluster APIs or as the default capacity provider strategy for a cluster with the CreateCluster
API.
Only capacity providers that are already associated with a cluster and have an ACTIVE
or UPDATING
status can be used in a capacity provider strategy. The PutClusterCapacityProviders API is used to associate a capacity provider with a cluster.
If specifying a capacity provider that uses an Auto Scaling group, the capacity provider must already be created. New Auto Scaling group capacity providers can be created with the CreateClusterCapacityProvider API operation.
To use a Fargate capacity provider, specify either the FARGATE
or FARGATE_SPOT
capacity providers. The Fargate capacity providers are available to all accounts and only need to be associated with a cluster to be used in a capacity provider strategy.
With FARGATE_SPOT
, you can run interruption tolerant tasks at a rate that's discounted compared to the FARGATE
price. FARGATE_SPOT
runs tasks on spare compute capacity. When Amazon Web Services needs the capacity back, your tasks are interrupted with a two-minute warning. FARGATE_SPOT
supports Linux tasks with the X86_64 architecture on platform version 1.3.0 or later. FARGATE_SPOT
supports Linux tasks with the ARM64 architecture on platform version 1.4.0 or later.
A capacity provider strategy may contain a maximum of 6 capacity providers.
Members
- base
-
- Type: int
The base value designates how many tasks, at a minimum, to run on the specified capacity provider. Only one capacity provider in a capacity provider strategy can have a base defined. If no value is specified, the default value of
0
is used. - capacityProvider
-
- Required: Yes
- Type: string
The short name of the capacity provider.
- weight
-
- Type: int
The weight value designates the relative percentage of the total number of tasks launched that should use the specified capacity provider. The
weight
value is taken into consideration after thebase
value, if defined, is satisfied.If no
weight
value is specified, the default value of0
is used. When multiple capacity providers are specified within a capacity provider strategy, at least one of the capacity providers must have a weight value greater than zero and any capacity providers with a weight of0
can't be used to place tasks. If you specify multiple capacity providers in a strategy that all have a weight of0
, anyRunTask
orCreateService
actions using the capacity provider strategy will fail.An example scenario for using weights is defining a strategy that contains two capacity providers and both have a weight of
1
, then when thebase
is satisfied, the tasks will be split evenly across the two capacity providers. Using that same logic, if you specify a weight of1
for capacityProviderA and a weight of4
for capacityProviderB, then for every one task that's run using capacityProviderA, four tasks would use capacityProviderB.
ClientException
Description
These errors are usually caused by a client action. This client action might be using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be specifying an identifier that isn't valid.
The following list includes additional causes for the error:
-
The
RunTask
could not be processed because you use managed scaling and there is a capacity error because the quota of tasks in thePROVISIONING
per cluster has been reached. For information about the service quotas, see Amazon ECS service quotas.
Members
- message
-
- Type: string
Message that describes the cause of the exception.
Cluster
Description
A regional grouping of one or more container instances where you can run task requests. Each account receives a default cluster the first time you use the Amazon ECS service, but you may also create other clusters. Clusters may contain more than one instance type simultaneously.
Members
- activeServicesCount
-
- Type: int
The number of services that are running on the cluster in an
ACTIVE
state. You can view these services with PListServices. - attachments
-
- Type: Array of Attachment structures
The resources attached to a cluster. When using a capacity provider with a cluster, the capacity provider and associated resources are returned as cluster attachments.
- attachmentsStatus
-
- Type: string
The status of the capacity providers associated with the cluster. The following are the states that are returned.
- UPDATE_IN_PROGRESS
-
The available capacity providers for the cluster are updating.
- UPDATE_COMPLETE
-
The capacity providers have successfully updated.
- UPDATE_FAILED
-
The capacity provider updates failed.
- capacityProviders
-
- Type: Array of strings
The capacity providers associated with the cluster.
- clusterArn
-
- Type: string
The Amazon Resource Name (ARN) that identifies the cluster. For more information about the ARN format, see Amazon Resource Name (ARN) in the Amazon ECS Developer Guide.
- clusterName
-
- Type: string
A user-generated string that you use to identify your cluster.
- configuration
-
- Type: ClusterConfiguration structure
The execute command configuration for the cluster.
- defaultCapacityProviderStrategy
-
- Type: Array of CapacityProviderStrategyItem structures
The default capacity provider strategy for the cluster. When services or tasks are run in the cluster with no launch type or capacity provider strategy specified, the default capacity provider strategy is used.
- pendingTasksCount
-
- Type: int
The number of tasks in the cluster that are in the
PENDING
state. - registeredContainerInstancesCount
-
- Type: int
The number of container instances registered into the cluster. This includes container instances in both
ACTIVE
andDRAINING
status. - runningTasksCount
-
- Type: int
The number of tasks in the cluster that are in the
RUNNING
state. - serviceConnectDefaults
-
- Type: ClusterServiceConnectDefaults structure
Use this parameter to set a default Service Connect namespace. After you set a default Service Connect namespace, any new services with Service Connect turned on that are created in the cluster are added as client services in the namespace. This setting only applies to new services that set the
enabled
parameter totrue
in theServiceConnectConfiguration
. You can set the namespace of each service individually in theServiceConnectConfiguration
to override this default parameter.Tasks that run in a namespace can use short names to connect to services in the namespace. Tasks can connect to services across all of the clusters in the namespace. Tasks connect through a managed proxy container that collects logs and metrics for increased visibility. Only the tasks that Amazon ECS services create are supported with Service Connect. For more information, see Service Connect in the Amazon Elastic Container Service Developer Guide.
- settings
-
- Type: Array of ClusterSetting structures
The settings for the cluster. This parameter indicates whether CloudWatch Container Insights is on or off for a cluster.
- statistics
-
- Type: Array of KeyValuePair structures
Additional information about your clusters that are separated by launch type. They include the following:
-
runningEC2TasksCount
-
RunningFargateTasksCount
-
pendingEC2TasksCount
-
pendingFargateTasksCount
-
activeEC2ServiceCount
-
activeFargateServiceCount
-
drainingEC2ServiceCount
-
drainingFargateServiceCount
- status
-
- Type: string
The status of the cluster. The following are the possible states that are returned.
- ACTIVE
-
The cluster is ready to accept tasks and if applicable you can register container instances with the cluster.
- PROVISIONING
-
The cluster has capacity providers that are associated with it and the resources needed for the capacity provider are being created.
- DEPROVISIONING
-
The cluster has capacity providers that are associated with it and the resources needed for the capacity provider are being deleted.
- FAILED
-
The cluster has capacity providers that are associated with it and the resources needed for the capacity provider have failed to create.
- INACTIVE
-
The cluster has been deleted. Clusters with an
INACTIVE
status may remain discoverable in your account for a period of time. However, this behavior is subject to change in the future. We don't recommend that you rely onINACTIVE
clusters persisting.
- tags
-
- Type: Array of Tag structures
The metadata that you apply to the cluster to help you categorize and organize them. Each tag consists of a key and an optional value. You define both.
The following basic restrictions apply to tags:
-
Maximum number of tags per resource - 50
-
For each resource, each tag key must be unique, and each tag key can have only one value.
-
Maximum key length - 128 Unicode characters in UTF-8
-
Maximum value length - 256 Unicode characters in UTF-8
-
If your tagging schema is used across multiple services and resources, remember that other services may have restrictions on allowed characters. Generally allowed characters are: letters, numbers, and spaces representable in UTF-8, and the following characters: + - = . _ : / @.
-
Tag keys and values are case-sensitive.
-
Do not use
aws:
,AWS:
, or any upper or lowercase combination of such as a prefix for either keys or values as it is reserved for Amazon Web Services use. You cannot edit or delete tag keys or values with this prefix. Tags with this prefix do not count against your tags per resource limit.
ClusterConfiguration
Description
The execute command and managed storage configuration for the cluster.
Members
- executeCommandConfiguration
-
- Type: ExecuteCommandConfiguration structure
The details of the execute command configuration.
- managedStorageConfiguration
-
- Type: ManagedStorageConfiguration structure
The details of the managed storage configuration.
ClusterContainsContainerInstancesException
Description
You can't delete a cluster that has registered container instances. First, deregister the container instances before you can delete the cluster. For more information, see DeregisterContainerInstance.
Members
ClusterContainsServicesException
Description
You can't delete a cluster that contains services. First, update the service to reduce its desired task count to 0, and then delete the service. For more information, see UpdateService and DeleteService.
Members
ClusterContainsTasksException
Description
You can't delete a cluster that has active tasks.
Members
ClusterNotFoundException
Description
The specified cluster wasn't found. You can view your available clusters with ListClusters. Amazon ECS clusters are Region specific.
Members
ClusterServiceConnectDefaults
Description
Use this parameter to set a default Service Connect namespace. After you set a default Service Connect namespace, any new services with Service Connect turned on that are created in the cluster are added as client services in the namespace. This setting only applies to new services that set the enabled
parameter to true
in the ServiceConnectConfiguration
. You can set the namespace of each service individually in the ServiceConnectConfiguration
to override this default parameter.
Tasks that run in a namespace can use short names to connect to services in the namespace. Tasks can connect to services across all of the clusters in the namespace. Tasks connect through a managed proxy container that collects logs and metrics for increased visibility. Only the tasks that Amazon ECS services create are supported with Service Connect. For more information, see Service Connect in the Amazon Elastic Container Service Developer Guide.
Members
- namespace
-
- Type: string
The namespace name or full Amazon Resource Name (ARN) of the Cloud Map namespace. When you create a service and don't specify a Service Connect configuration, this namespace is used.
ClusterServiceConnectDefaultsRequest
Description
Use this parameter to set a default Service Connect namespace. After you set a default Service Connect namespace, any new services with Service Connect turned on that are created in the cluster are added as client services in the namespace. This setting only applies to new services that set the enabled
parameter to true
in the ServiceConnectConfiguration
. You can set the namespace of each service individually in the ServiceConnectConfiguration
to override this default parameter.
Tasks that run in a namespace can use short names to connect to services in the namespace. Tasks can connect to services across all of the clusters in the namespace. Tasks connect through a managed proxy container that collects logs and metrics for increased visibility. Only the tasks that Amazon ECS services create are supported with Service Connect. For more information, see Service Connect in the Amazon Elastic Container Service Developer Guide.
Members
- namespace
-
- Required: Yes
- Type: string
The namespace name or full Amazon Resource Name (ARN) of the Cloud Map namespace that's used when you create a service and don't specify a Service Connect configuration. The namespace name can include up to 1024 characters. The name is case-sensitive. The name can't include hyphens (-), tilde (~), greater than (>), less than (<), or slash (/).
If you enter an existing namespace name or ARN, then that namespace will be used. Any namespace type is supported. The namespace must be in this account and this Amazon Web Services Region.
If you enter a new name, a Cloud Map namespace will be created. Amazon ECS creates a Cloud Map namespace with the "API calls" method of instance discovery only. This instance discovery method is the "HTTP" namespace type in the Command Line Interface. Other types of instance discovery aren't used by Service Connect.
If you update the cluster with an empty string
""
for the namespace name, the cluster configuration for Service Connect is removed. Note that the namespace will remain in Cloud Map and must be deleted separately.For more information about Cloud Map, see Working with Services in the Cloud Map Developer Guide.
ClusterSetting
Description
The settings to use when creating a cluster. This parameter is used to turn on CloudWatch Container Insights for a cluster.
Members
- name
-
- Type: string
The name of the cluster setting. The value is
containerInsights
. - value
-
- Type: string
The value to set for the cluster setting. The supported values are
enabled
anddisabled
.If you set
name
tocontainerInsights
andvalue
toenabled
, CloudWatch Container Insights will be on for the cluster, otherwise it will be off unless thecontainerInsights
account setting is turned on. If a cluster value is specified, it will override thecontainerInsights
value set with PutAccountSetting or PutAccountSettingDefault.
ConflictException
Description
The RunTask
request could not be processed due to conflicts. The provided clientToken
is already in use with a different RunTask
request. The resourceIds
are the existing task ARNs which are already associated with the clientToken
.
To fix this issue:
-
Run
RunTask
with a uniqueclientToken
. -
Run
RunTask
with theclientToken
and the original set of parameters
Members
- resourceIds
-
- Type: Array of strings
The existing task ARNs which are already associated with the
clientToken
.
Container
Description
A Docker container that's part of a task.
Members
- containerArn
-
- Type: string
The Amazon Resource Name (ARN) of the container.
- cpu
-
- Type: string
The number of CPU units set for the container. The value is
0
if no value was specified in the container definition when the task definition was registered. - exitCode
-
- Type: int
The exit code returned from the container.
- gpuIds
-
- Type: Array of strings
The IDs of each GPU assigned to the container.
- healthStatus
-
- Type: string
The health status of the container. If health checks aren't configured for this container in its task definition, then it reports the health status as
UNKNOWN
. - image
-
- Type: string
The image used for the container.
- imageDigest
-
- Type: string
The container image manifest digest.
- lastStatus
-
- Type: string
The last known status of the container.
- managedAgents
-
- Type: Array of ManagedAgent structures
The details of any Amazon ECS managed agents associated with the container.
- memory
-
- Type: string
The hard limit (in MiB) of memory set for the container.
- memoryReservation
-
- Type: string
The soft limit (in MiB) of memory set for the container.
- name
-
- Type: string
The name of the container.
- networkBindings
-
- Type: Array of NetworkBinding structures
The network bindings associated with the container.
- networkInterfaces
-
- Type: Array of NetworkInterface structures
The network interfaces associated with the container.
- reason
-
- Type: string
A short (255 max characters) human-readable string to provide additional details about a running or stopped container.
- runtimeId
-
- Type: string
The ID of the Docker container.
- taskArn
-
- Type: string
The ARN of the task.
ContainerDefinition
Description
Container definitions are used in task definitions to describe the different containers that are launched as part of a task.
Members
- command
-
- Type: Array of strings
The command that's passed to the container. This parameter maps to
Cmd
in the docker container create command and theCOMMAND
parameter to docker run. If there are multiple arguments, each argument is a separated string in the array. - cpu
-
- Type: int
The number of
cpu
units reserved for the container. This parameter maps toCpuShares
in the docker container create commandand the--cpu-shares
option to docker run.This field is optional for tasks using the Fargate launch type, and the only requirement is that the total amount of CPU reserved for all containers within a task be lower than the task-level
cpu
value.You can determine the number of CPU units that are available per EC2 instance type by multiplying the vCPUs listed for that instance type on the Amazon EC2 Instances detail page by 1,024.
Linux containers share unallocated CPU units with other containers on the container instance with the same ratio as their allocated amount. For example, if you run a single-container task on a single-core instance type with 512 CPU units specified for that container, and that's the only task running on the container instance, that container could use the full 1,024 CPU unit share at any given time. However, if you launched another copy of the same task on that container instance, each task is guaranteed a minimum of 512 CPU units when needed. Moreover, each container could float to higher CPU usage if the other container was not using it. If both tasks were 100% active all of the time, they would be limited to 512 CPU units.
On Linux container instances, the Docker daemon on the container instance uses the CPU value to calculate the relative CPU share ratios for running containers. The minimum valid CPU share value that the Linux kernel allows is 2, and the maximum valid CPU share value that the Linux kernel allows is 262144. However, the CPU parameter isn't required, and you can use CPU values below 2 or above 262144 in your container definitions. For CPU values below 2 (including null) or above 262144, the behavior varies based on your Amazon ECS container agent version:
-
Agent versions less than or equal to 1.1.0: Null and zero CPU values are passed to Docker as 0, which Docker then converts to 1,024 CPU shares. CPU values of 1 are passed to Docker as 1, which the Linux kernel converts to two CPU shares.
-
Agent versions greater than or equal to 1.2.0: Null, zero, and CPU values of 1 are passed to Docker as 2.
-
Agent versions greater than or equal to 1.84.0: CPU values greater than 256 vCPU are passed to Docker as 256, which is equivalent to 262144 CPU shares.
On Windows container instances, the CPU limit is enforced as an absolute limit, or a quota. Windows containers only have access to the specified amount of CPU that's described in the task definition. A null or zero CPU value is passed to Docker as
0
, which Windows interprets as 1% of one CPU. - credentialSpecs
-
- Type: Array of strings
A list of ARNs in SSM or Amazon S3 to a credential spec (
CredSpec
) file that configures the container for Active Directory authentication. We recommend that you use this parameter instead of thedockerSecurityOptions
. The maximum number of ARNs is 1.There are two formats for each ARN.
- credentialspecdomainless:MyARN
-
You use
credentialspecdomainless:MyARN
to provide aCredSpec
with an additional section for a secret in Secrets Manager. You provide the login credentials to the domain in the secret.Each task that runs on any container instance can join different domains.
You can use this format without joining the container instance to a domain.
- credentialspec:MyARN
-
You use
credentialspec:MyARN
to provide aCredSpec
for a single domain.You must join the container instance to the domain before you start any tasks that use this task definition.
In both formats, replace
MyARN
with the ARN in SSM or Amazon S3.If you provide a
credentialspecdomainless:MyARN
, thecredspec
must provide a ARN in Secrets Manager for a secret containing the username, password, and the domain to connect to. For better security, the instance isn't joined to the domain for domainless authentication. Other applications on the instance can't use the domainless credentials. You can use this parameter to run tasks on the same instance, even it the tasks need to join different domains. For more information, see Using gMSAs for Windows Containers and Using gMSAs for Linux Containers. - dependsOn
-
- Type: Array of ContainerDependency structures
The dependencies defined for container startup and shutdown. A container can contain multiple dependencies on other containers in a task definition. When a dependency is defined for container startup, for container shutdown it is reversed.
For tasks using the EC2 launch type, the container instances require at least version 1.26.0 of the container agent to turn on container dependencies. However, we recommend using the latest container agent version. For information about checking your agent version and updating to the latest version, see Updating the Amazon ECS Container Agent in the Amazon Elastic Container Service Developer Guide. If you're using an Amazon ECS-optimized Linux AMI, your instance needs at least version 1.26.0-1 of the
ecs-init
package. If your container instances are launched from version20190301
or later, then they contain the required versions of the container agent andecs-init
. For more information, see Amazon ECS-optimized Linux AMI in the Amazon Elastic Container Service Developer Guide.For tasks using the Fargate launch type, the task or service requires the following platforms:
-
Linux platform version
1.3.0
or later. -
Windows platform version
1.0.0
or later.
- disableNetworking
-
- Type: boolean
When this parameter is true, networking is off within the container. This parameter maps to
NetworkDisabled
in the docker container create command.This parameter is not supported for Windows containers.
- dnsSearchDomains
-
- Type: Array of strings
A list of DNS search domains that are presented to the container. This parameter maps to
DnsSearch
in the docker container create command and the--dns-search
option to docker run.This parameter is not supported for Windows containers.
- dnsServers
-
- Type: Array of strings
A list of DNS servers that are presented to the container. This parameter maps to
Dns
in the docker container create command and the--dns
option to docker run.This parameter is not supported for Windows containers.
- dockerLabels
-
- Type: Associative array of custom strings keys (String) to strings
A key/value map of labels to add to the container. This parameter maps to
Labels
in the docker container create command and the--label
option to docker run. This parameter requires version 1.18 of the Docker Remote API or greater on your container instance. To check the Docker Remote API version on your container instance, log in to your container instance and run the following command:sudo docker version --format '{{.Server.APIVersion}}'
- dockerSecurityOptions
-
- Type: Array of strings
A list of strings to provide custom configuration for multiple security systems. This field isn't valid for containers in tasks using the Fargate launch type.
For Linux tasks on EC2, this parameter can be used to reference custom labels for SELinux and AppArmor multi-level security systems.
For any tasks on EC2, this parameter can be used to reference a credential spec file that configures a container for Active Directory authentication. For more information, see Using gMSAs for Windows Containers and Using gMSAs for Linux Containers in the Amazon Elastic Container Service Developer Guide.
This parameter maps to
SecurityOpt
in the docker container create command and the--security-opt
option to docker run.The Amazon ECS container agent running on a container instance must register with the
ECS_SELINUX_CAPABLE=true
orECS_APPARMOR_CAPABLE=true
environment variables before containers placed on that instance can use these security options. For more information, see Amazon ECS Container Agent Configuration in the Amazon Elastic Container Service Developer Guide.Valid values: "no-new-privileges" | "apparmor:PROFILE" | "label:value" | "credentialspec:CredentialSpecFilePath"
- entryPoint
-
- Type: Array of strings
Early versions of the Amazon ECS container agent don't properly handle
entryPoint
parameters. If you have problems usingentryPoint
, update your container agent or enter your commands and arguments ascommand
array items instead.The entry point that's passed to the container. This parameter maps to
Entrypoint
in the docker container create command and the--entrypoint
option to docker run. - environment
-
- Type: Array of KeyValuePair structures
The environment variables to pass to a container. This parameter maps to
Env
in the docker container create command and the--env
option to docker run.We don't recommend that you use plaintext environment variables for sensitive information, such as credential data.
- environmentFiles
-
- Type: Array of EnvironmentFile structures
A list of files containing the environment variables to pass to a container. This parameter maps to the
--env-file
option to docker run.You can specify up to ten environment files. The file must have a
.env
file extension. Each line in an environment file contains an environment variable inVARIABLE=VALUE
format. Lines beginning with#
are treated as comments and are ignored.If there are environment variables specified using the
environment
parameter in a container definition, they take precedence over the variables contained within an environment file. If multiple environment files are specified that contain the same variable, they're processed from the top down. We recommend that you use unique variable names. For more information, see Specifying Environment Variables in the Amazon Elastic Container Service Developer Guide. - essential
-
- Type: boolean
If the
essential
parameter of a container is marked astrue
, and that container fails or stops for any reason, all other containers that are part of the task are stopped. If theessential
parameter of a container is marked asfalse
, its failure doesn't affect the rest of the containers in a task. If this parameter is omitted, a container is assumed to be essential.All tasks must have at least one essential container. If you have an application that's composed of multiple containers, group containers that are used for a common purpose into components, and separate the different components into multiple task definitions. For more information, see Application Architecture in the Amazon Elastic Container Service Developer Guide.
- extraHosts
-
- Type: Array of HostEntry structures
A list of hostnames and IP address mappings to append to the
/etc/hosts
file on the container. This parameter maps toExtraHosts
in the docker container create command and the--add-host
option to docker run.This parameter isn't supported for Windows containers or tasks that use the
awsvpc
network mode. - firelensConfiguration
-
- Type: FirelensConfiguration structure
The FireLens configuration for the container. This is used to specify and configure a log router for container logs. For more information, see Custom Log Routing in the Amazon Elastic Container Service Developer Guide.
- healthCheck
-
- Type: HealthCheck structure
The container health check command and associated configuration parameters for the container. This parameter maps to
HealthCheck
in the docker container create command and theHEALTHCHECK
parameter of docker run. - hostname
-
- Type: string
The hostname to use for your container. This parameter maps to
Hostname
in the docker container create command and the--hostname
option to docker run.The
hostname
parameter is not supported if you're using theawsvpc
network mode. - image
-
- Type: string
The image used to start a container. This string is passed directly to the Docker daemon. By default, images in the Docker Hub registry are available. Other repositories are specified with either
repository-url/image:tag
orrepository-url/image@digest
. Up to 255 letters (uppercase and lowercase), numbers, hyphens, underscores, colons, periods, forward slashes, and number signs are allowed. This parameter maps toImage
in the docker container create command and theIMAGE
parameter of docker run.-
When a new task starts, the Amazon ECS container agent pulls the latest version of the specified image and tag for the container to use. However, subsequent updates to a repository image aren't propagated to already running tasks.
-
Images in Amazon ECR repositories can be specified by either using the full
registry/repository:tag
orregistry/repository@digest
. For example,012345678910.dkr.ecr.<region-name>.amazonaws.com/<repository-name>:latest
or012345678910.dkr.ecr.<region-name>.amazonaws.com/<repository-name>@sha256:94afd1f2e64d908bc90dbca0035a5b567EXAMPLE
. -
Images in official repositories on Docker Hub use a single name (for example,
ubuntu
ormongo
). -
Images in other repositories on Docker Hub are qualified with an organization name (for example,
amazon/amazon-ecs-agent
). -
Images in other online repositories are qualified further by a domain name (for example,
quay.io/assemblyline/ubuntu
).
- interactive
-
- Type: boolean
When this parameter is
true
, you can deploy containerized applications that requirestdin
or atty
to be allocated. This parameter maps toOpenStdin
in the docker container create command and the--interactive
option to docker run. - links
-
- Type: Array of strings
The
links
parameter allows containers to communicate with each other without the need for port mappings. This parameter is only supported if the network mode of a task definition isbridge
. Thename:internalName
construct is analogous toname:alias
in Docker links. Up to 255 letters (uppercase and lowercase), numbers, underscores, and hyphens are allowed.. This parameter maps toLinks
in the docker container create command and the--link
option to docker run.This parameter is not supported for Windows containers.
Containers that are collocated on a single container instance may be able to communicate with each other without requiring links or host port mappings. Network isolation is achieved on the container instance using security groups and VPC settings.
- linuxParameters
-
- Type: LinuxParameters structure
Linux-specific modifications that are applied to the container, such as Linux kernel capabilities. For more information see KernelCapabilities.
This parameter is not supported for Windows containers.
- logConfiguration
-
- Type: LogConfiguration structure
The log configuration specification for the container.
This parameter maps to
LogConfig
in the docker container create command and the--log-driver
option to docker run. By default, containers use the same logging driver that the Docker daemon uses. However the container can use a different logging driver than the Docker daemon by specifying a log driver with this parameter in the container definition. To use a different logging driver for a container, the log system must be configured properly on the container instance (or on a different log server for remote logging options).Amazon ECS currently supports a subset of the logging drivers available to the Docker daemon (shown in the LogConfiguration data type). Additional log drivers may be available in future releases of the Amazon ECS container agent.
This parameter requires version 1.18 of the Docker Remote API or greater on your container instance. To check the Docker Remote API version on your container instance, log in to your container instance and run the following command:
sudo docker version --format '{{.Server.APIVersion}}'
The Amazon ECS container agent running on a container instance must register the logging drivers available on that instance with the
ECS_AVAILABLE_LOGGING_DRIVERS
environment variable before containers placed on that instance can use these log configuration options. For more information, see Amazon ECS Container Agent Configuration in the Amazon Elastic Container Service Developer Guide. - memory
-
- Type: int
The amount (in MiB) of memory to present to the container. If your container attempts to exceed the memory specified here, the container is killed. The total amount of memory reserved for all containers within a task must be lower than the task
memory
value, if one is specified. This parameter maps toMemory
in the docker container create command and the--memory
option to docker run.If using the Fargate launch type, this parameter is optional.
If using the EC2 launch type, you must specify either a task-level memory value or a container-level memory value. If you specify both a container-level
memory
andmemoryReservation
value,memory
must be greater thanmemoryReservation
. If you specifymemoryReservation
, then that value is subtracted from the available memory resources for the container instance where the container is placed. Otherwise, the value ofmemory
is used.The Docker 20.10.0 or later daemon reserves a minimum of 6 MiB of memory for a container. So, don't specify less than 6 MiB of memory for your containers.
The Docker 19.03.13-ce or earlier daemon reserves a minimum of 4 MiB of memory for a container. So, don't specify less than 4 MiB of memory for your containers.
- memoryReservation
-
- Type: int
The soft limit (in MiB) of memory to reserve for the container. When system memory is under heavy contention, Docker attempts to keep the container memory to this soft limit. However, your container can consume more memory when it needs to, up to either the hard limit specified with the
memory
parameter (if applicable), or all of the available memory on the container instance, whichever comes first. This parameter maps toMemoryReservation
in the docker container create command and the--memory-reservation
option to docker run.If a task-level memory value is not specified, you must specify a non-zero integer for one or both of
memory
ormemoryReservation
in a container definition. If you specify both,memory
must be greater thanmemoryReservation
. If you specifymemoryReservation
, then that value is subtracted from the available memory resources for the container instance where the container is placed. Otherwise, the value ofmemory
is used.For example, if your container normally uses 128 MiB of memory, but occasionally bursts to 256 MiB of memory for short periods of time, you can set a
memoryReservation
of 128 MiB, and amemory
hard limit of 300 MiB. This configuration would allow the container to only reserve 128 MiB of memory from the remaining resources on the container instance, but also allow the container to consume more memory resources when needed.The Docker 20.10.0 or later daemon reserves a minimum of 6 MiB of memory for a container. So, don't specify less than 6 MiB of memory for your containers.
The Docker 19.03.13-ce or earlier daemon reserves a minimum of 4 MiB of memory for a container. So, don't specify less than 4 MiB of memory for your containers.
- mountPoints
-
- Type: Array of MountPoint structures
The mount points for data volumes in your container.
This parameter maps to
Volumes
in the docker container create command and the--volume
option to docker run.Windows containers can mount whole directories on the same drive as
$env:ProgramData
. Windows containers can't mount directories on a different drive, and mount point can't be across drives. - name
-
- Type: string
The name of a container. If you're linking multiple containers together in a task definition, the
name
of one container can be entered in thelinks
of another container to connect the containers. Up to 255 letters (uppercase and lowercase), numbers, underscores, and hyphens are allowed. This parameter maps toname
in the docker container create command and the--name
option to docker run. - portMappings
-
- Type: Array of PortMapping structures
The list of port mappings for the container. Port mappings allow containers to access ports on the host container instance to send or receive traffic.
For task definitions that use the
awsvpc
network mode, only specify thecontainerPort
. ThehostPort
can be left blank or it must be the same value as thecontainerPort
.Port mappings on Windows use the
NetNAT
gateway address rather thanlocalhost
. There's no loopback for port mappings on Windows, so you can't access a container's mapped port from the host itself.This parameter maps to
PortBindings
in the the docker container create command and the--publish
option to docker run. If the network mode of a task definition is set tonone
, then you can't specify port mappings. If the network mode of a task definition is set tohost
, then host ports must either be undefined or they must match the container port in the port mapping.After a task reaches the
RUNNING
status, manual and automatic host and container port assignments are visible in the Network Bindings section of a container description for a selected task in the Amazon ECS console. The assignments are also visible in thenetworkBindings
section DescribeTasks responses. - privileged
-
- Type: boolean
When this parameter is true, the container is given elevated privileges on the host container instance (similar to the
root
user). This parameter maps toPrivileged
in the docker container create command and the--privileged
option to docker runThis parameter is not supported for Windows containers or tasks run on Fargate.
- pseudoTerminal
-
- Type: boolean
When this parameter is
true
, a TTY is allocated. This parameter maps toTty
in the docker container create command and the--tty
option to docker run. - readonlyRootFilesystem
-
- Type: boolean
When this parameter is true, the container is given read-only access to its root file system. This parameter maps to
ReadonlyRootfs
in the docker container create command and the--read-only
option to docker run.This parameter is not supported for Windows containers.
- repositoryCredentials
-
- Type: RepositoryCredentials structure
The private repository authentication credentials to use.
- resourceRequirements
-
- Type: Array of ResourceRequirement structures
The type and amount of a resource to assign to a container. The only supported resource is a GPU.
- restartPolicy
-
- Type: ContainerRestartPolicy structure
The restart policy for a container. When you set up a restart policy, Amazon ECS can restart the container without needing to replace the task. For more information, see Restart individual containers in Amazon ECS tasks with container restart policies in the Amazon Elastic Container Service Developer Guide.
- secrets
-
- Type: Array of Secret structures
The secrets to pass to the container. For more information, see Specifying Sensitive Data in the Amazon Elastic Container Service Developer Guide.
- startTimeout
-
- Type: int
Time duration (in seconds) to wait before giving up on resolving dependencies for a container. For example, you specify two containers in a task definition with containerA having a dependency on containerB reaching a
COMPLETE
,SUCCESS
, orHEALTHY
status. If astartTimeout
value is specified for containerB and it doesn't reach the desired status within that time then containerA gives up and not start. This results in the task transitioning to aSTOPPED
state.When the
ECS_CONTAINER_START_TIMEOUT
container agent configuration variable is used, it's enforced independently from this start timeout value.For tasks using the Fargate launch type, the task or service requires the following platforms:
-
Linux platform version
1.3.0
or later. -
Windows platform version
1.0.0
or later.
For tasks using the EC2 launch type, your container instances require at least version
1.26.0
of the container agent to use a container start timeout value. However, we recommend using the latest container agent version. For information about checking your agent version and updating to the latest version, see Updating the Amazon ECS Container Agent in the Amazon Elastic Container Service Developer Guide. If you're using an Amazon ECS-optimized Linux AMI, your instance needs at least version1.26.0-1
of theecs-init
package. If your container instances are launched from version20190301
or later, then they contain the required versions of the container agent andecs-init
. For more information, see Amazon ECS-optimized Linux AMI in the Amazon Elastic Container Service Developer Guide.The valid values for Fargate are 2-120 seconds.
- stopTimeout
-
- Type: int
Time duration (in seconds) to wait before the container is forcefully killed if it doesn't exit normally on its own.
For tasks using the Fargate launch type, the task or service requires the following platforms:
-
Linux platform version
1.3.0
or later. -
Windows platform version
1.0.0
or later.
For tasks that use the Fargate launch type, the max stop timeout value is 120 seconds and if the parameter is not specified, the default value of 30 seconds is used.
For tasks that use the EC2 launch type, if the
stopTimeout
parameter isn't specified, the value set for the Amazon ECS container agent configuration variableECS_CONTAINER_STOP_TIMEOUT
is used. If neither thestopTimeout
parameter or theECS_CONTAINER_STOP_TIMEOUT
agent configuration variable are set, then the default values of 30 seconds for Linux containers and 30 seconds on Windows containers are used. Your container instances require at least version 1.26.0 of the container agent to use a container stop timeout value. However, we recommend using the latest container agent version. For information about checking your agent version and updating to the latest version, see Updating the Amazon ECS Container Agent in the Amazon Elastic Container Service Developer Guide. If you're using an Amazon ECS-optimized Linux AMI, your instance needs at least version 1.26.0-1 of theecs-init
package. If your container instances are launched from version20190301
or later, then they contain the required versions of the container agent andecs-init
. For more information, see Amazon ECS-optimized Linux AMI in the Amazon Elastic Container Service Developer Guide.The valid values for Fargate are 2-120 seconds.
- systemControls
-
- Type: Array of SystemControl structures
A list of namespaced kernel parameters to set in the container. This parameter maps to
Sysctls
in the docker container create command and the--sysctl
option to docker run. For example, you can configurenet.ipv4.tcp_keepalive_time
setting to maintain longer lived connections. - ulimits
-
- Type: Array of Ulimit structures
A list of
ulimits
to set in the container. If aulimit
value is specified in a task definition, it overrides the default values set by Docker. This parameter maps toUlimits
in the docker container create command and the--ulimit
option to docker run. Valid naming values are displayed in the Ulimit data type.Amazon ECS tasks hosted on Fargate use the default resource limit values set by the operating system with the exception of the
nofile
resource limit parameter which Fargate overrides. Thenofile
resource limit sets a restriction on the number of open files that a container can use. The defaultnofile
soft limit is65535
and the default hard limit is65535
.This parameter requires version 1.18 of the Docker Remote API or greater on your container instance. To check the Docker Remote API version on your container instance, log in to your container instance and run the following command:
sudo docker version --format '{{.Server.APIVersion}}'
This parameter is not supported for Windows containers.
- user
-
- Type: string
The user to use inside the container. This parameter maps to
User
in the docker container create command and the--user
option to docker run.When running tasks using the
host
network mode, don't run containers using the root user (UID 0). We recommend using a non-root user for better security.You can specify the
user
using the following formats. If specifying a UID or GID, you must specify it as a positive integer.-
user
-
user:group
-
uid
-
uid:gid
-
user:gid
-
uid:group
This parameter is not supported for Windows containers.
- volumesFrom
-
- Type: Array of VolumeFrom structures
Data volumes to mount from another container. This parameter maps to
VolumesFrom
in the docker container create command and the--volumes-from
option to docker run. - workingDirectory
-
- Type: string
The working directory to run commands inside the container in. This parameter maps to
WorkingDir
in the docker container create command and the--workdir
option to docker run.
ContainerDependency
Description
The dependencies defined for container startup and shutdown. A container can contain multiple dependencies. When a dependency is defined for container startup, for container shutdown it is reversed.
Your Amazon ECS container instances require at least version 1.26.0 of the container agent to use container dependencies. However, we recommend using the latest container agent version. For information about checking your agent version and updating to the latest version, see Updating the Amazon ECS Container Agent in the Amazon Elastic Container Service Developer Guide. If you're using an Amazon ECS-optimized Linux AMI, your instance needs at least version 1.26.0-1 of the ecs-init
package. If your container instances are launched from version 20190301
or later, then they contain the required versions of the container agent and ecs-init
. For more information, see Amazon ECS-optimized Linux AMI in the Amazon Elastic Container Service Developer Guide.
For tasks that use the Fargate launch type, the task or service requires the following platforms:
-
Linux platform version
1.3.0
or later. -
Windows platform version
1.0.0
or later.
For more information about how to create a container dependency, see Container dependency in the Amazon Elastic Container Service Developer Guide.
Members
- condition
-
- Required: Yes
- Type: string
The dependency condition of the container. The following are the available conditions and their behavior:
-
START
- This condition emulates the behavior of links and volumes today. It validates that a dependent container is started before permitting other containers to start. -
COMPLETE
- This condition validates that a dependent container runs to completion (exits) before permitting other containers to start. This can be useful for nonessential containers that run a script and then exit. This condition can't be set on an essential container. -
SUCCESS
- This condition is the same asCOMPLETE
, but it also requires that the container exits with azero
status. This condition can't be set on an essential container. -
HEALTHY
- This condition validates that the dependent container passes its Docker health check before permitting other containers to start. This requires that the dependent container has health checks configured. This condition is confirmed only at task startup.
- containerName
-
- Required: Yes
- Type: string
The name of a container.
ContainerImage
Description
The details about the container image a service revision uses.
To ensure that all tasks in a service use the same container image, Amazon ECS resolves container image names and any image tags specified in the task definition to container image digests.
After the container image digest has been established, Amazon ECS uses the digest to start any other desired tasks, and for any future service and service revision updates. This leads to all tasks in a service always running identical container images, resulting in version consistency for your software. For more information, see Container image resolution in the Amazon ECS Developer Guide.
Members
- containerName
-
- Type: string
The name of the container.
- image
-
- Type: string
The container image.
- imageDigest
-
- Type: string
The container image digest.
ContainerInstance
Description
An Amazon EC2 or External instance that's running the Amazon ECS agent and has been registered with a cluster.
Members
- agentConnected
-
- Type: boolean
This parameter returns
true
if the agent is connected to Amazon ECS. An instance with an agent that may be unhealthy or stopped returnfalse
. Only instances connected to an agent can accept task placement requests. - agentUpdateStatus
-
- Type: string
The status of the most recent agent update. If an update wasn't ever requested, this value is
NULL
. - attachments
-
- Type: Array of Attachment structures
The resources attached to a container instance, such as an elastic network interface.
- attributes
-
- Type: Array of Attribute structures
The attributes set for the container instance, either by the Amazon ECS container agent at instance registration or manually with the PutAttributes operation.
- capacityProviderName
-
- Type: string
The capacity provider that's associated with the container instance.
- containerInstanceArn
-
- Type: string
The Amazon Resource Name (ARN) of the container instance. For more information about the ARN format, see Amazon Resource Name (ARN) in the Amazon ECS Developer Guide.
- ec2InstanceId
-
- Type: string
The ID of the container instance. For Amazon EC2 instances, this value is the Amazon EC2 instance ID. For external instances, this value is the Amazon Web Services Systems Manager managed instance ID.
- healthStatus
-
- Type: ContainerInstanceHealthStatus structure
An object representing the health status of the container instance.
- pendingTasksCount
-
- Type: int
The number of tasks on the container instance that are in the
PENDING
status. - registeredAt
-
- Type: timestamp (string|DateTime or anything parsable by strtotime)
The Unix timestamp for the time when the container instance was registered.
- registeredResources
-
- Type: Array of Resource structures
For CPU and memory resource types, this parameter describes the amount of each resource that was available on the container instance when the container agent registered it with Amazon ECS. This value represents the total amount of CPU and memory that can be allocated on this container instance to tasks. For port resource types, this parameter describes the ports that were reserved by the Amazon ECS container agent when it registered the container instance with Amazon ECS.
- remainingResources
-
- Type: Array of Resource structures
For CPU and memory resource types, this parameter describes the remaining CPU and memory that wasn't already allocated to tasks and is therefore available for new tasks. For port resource types, this parameter describes the ports that were reserved by the Amazon ECS container agent (at instance registration time) and any task containers that have reserved port mappings on the host (with the
host
orbridge
network mode). Any port that's not specified here is available for new tasks. - runningTasksCount
-
- Type: int
The number of tasks on the container instance that have a desired status (
desiredStatus
) ofRUNNING
. - status
-
- Type: string
The status of the container instance. The valid values are
REGISTERING
,REGISTRATION_FAILED
,ACTIVE
,INACTIVE
,DEREGISTERING
, orDRAINING
.If your account has opted in to the
awsvpcTrunking
account setting, then any newly registered container instance will transition to aREGISTERING
status while the trunk elastic network interface is provisioned for the instance. If the registration fails, the instance will transition to aREGISTRATION_FAILED
status. You can describe the container instance and see the reason for failure in thestatusReason
parameter. Once the container instance is terminated, the instance transitions to aDEREGISTERING
status while the trunk elastic network interface is deprovisioned. The instance then transitions to anINACTIVE
status.The
ACTIVE
status indicates that the container instance can accept tasks. TheDRAINING
indicates that new tasks aren't placed on the container instance and any service tasks running on the container instance are removed if possible. For more information, see Container instance draining in the Amazon Elastic Container Service Developer Guide. - statusReason
-
- Type: string
The reason that the container instance reached its current status.
- tags
-
- Type: Array of Tag structures
The metadata that you apply to the container instance to help you categorize and organize them. Each tag consists of a key and an optional value. You define both.
The following basic restrictions apply to tags:
-
Maximum number of tags per resource - 50
-
For each resource, each tag key must be unique, and each tag key can have only one value.
-
Maximum key length - 128 Unicode characters in UTF-8
-
Maximum value length - 256 Unicode characters in UTF-8
-
If your tagging schema is used across multiple services and resources, remember that other services may have restrictions on allowed characters. Generally allowed characters are: letters, numbers, and spaces representable in UTF-8, and the following characters: + - = . _ : / @.
-
Tag keys and values are case-sensitive.
-
Do not use
aws:
,AWS:
, or any upper or lowercase combination of such as a prefix for either keys or values as it is reserved for Amazon Web Services use. You cannot edit or delete tag keys or values with this prefix. Tags with this prefix do not count against your tags per resource limit.
- version
-
- Type: long (int|float)
The version counter for the container instance. Every time a container instance experiences a change that triggers a CloudWatch event, the version counter is incremented. If you're replicating your Amazon ECS container instance state with CloudWatch Events, you can compare the version of a container instance reported by the Amazon ECS APIs with the version reported in CloudWatch Events for the container instance (inside the
detail
object) to verify that the version in your event stream is current. - versionInfo
-
- Type: VersionInfo structure
The version information for the Amazon ECS container agent and Docker daemon running on the container instance.
ContainerInstanceHealthStatus
Description
An object representing the health status of the container instance.
Members
- details
-
- Type: Array of InstanceHealthCheckResult structures
An array of objects representing the details of the container instance health status.
- overallStatus
-
- Type: string
The overall health status of the container instance. This is an aggregate status of all container instance health checks.
ContainerOverride
Description
The overrides that are sent to a container. An empty container override can be passed in. An example of an empty container override is {"containerOverrides": [ ] }
. If a non-empty container override is specified, the name
parameter must be included.
You can use Secrets Manager or Amazon Web Services Systems Manager Parameter Store to store the sensitive data. For more information, see Retrieve secrets through environment variables in the Amazon ECS Developer Guide.
Members
- command
-
- Type: Array of strings
The command to send to the container that overrides the default command from the Docker image or the task definition. You must also specify a container name.
- cpu
-
- Type: int
The number of
cpu
units reserved for the container, instead of the default value from the task definition. You must also specify a container name. - environment
-
- Type: Array of KeyValuePair structures
The environment variables to send to the container. You can add new environment variables, which are added to the container at launch, or you can override the existing environment variables from the Docker image or the task definition. You must also specify a container name.
- environmentFiles
-
- Type: Array of EnvironmentFile structures
A list of files containing the environment variables to pass to a container, instead of the value from the container definition.
- memory
-
- Type: int
The hard limit (in MiB) of memory to present to the container, instead of the default value from the task definition. If your container attempts to exceed the memory specified here, the container is killed. You must also specify a container name.
- memoryReservation
-
- Type: int
The soft limit (in MiB) of memory to reserve for the container, instead of the default value from the task definition. You must also specify a container name.
- name
-
- Type: string
The name of the container that receives the override. This parameter is required if any override is specified.
- resourceRequirements
-
- Type: Array of ResourceRequirement structures
The type and amount of a resource to assign to a container, instead of the default value from the task definition. The only supported resource is a GPU.
ContainerRestartPolicy
Description
You can enable a restart policy for each container defined in your task definition, to overcome transient failures faster and maintain task availability. When you enable a restart policy for a container, Amazon ECS can restart the container if it exits, without needing to replace the task. For more information, see Restart individual containers in Amazon ECS tasks with container restart policies in the Amazon Elastic Container Service Developer Guide.
Members
- enabled
-
- Required: Yes
- Type: boolean
Specifies whether a restart policy is enabled for the container.
- ignoredExitCodes
-
- Type: Array of ints
A list of exit codes that Amazon ECS will ignore and not attempt a restart on. You can specify a maximum of 50 container exit codes. By default, Amazon ECS does not ignore any exit codes.
- restartAttemptPeriod
-
- Type: int
A period of time (in seconds) that the container must run for before a restart can be attempted. A container can be restarted only once every
restartAttemptPeriod
seconds. If a container isn't able to run for this time period and exits early, it will not be restarted. You can set a minimumrestartAttemptPeriod
of 60 seconds and a maximumrestartAttemptPeriod
of 1800 seconds. By default, a container must run for 300 seconds before it can be restarted.
ContainerStateChange
Description
An object that represents a change in state for a container.
Members
- containerName
-
- Type: string
The name of the container.
- exitCode
-
- Type: int
The exit code for the container, if the state change is a result of the container exiting.
- imageDigest
-
- Type: string
The container image SHA 256 digest.
- networkBindings
-
- Type: Array of NetworkBinding structures
Any network bindings that are associated with the container.
- reason
-
- Type: string
The reason for the state change.
- runtimeId
-
- Type: string
The ID of the Docker container.
- status
-
- Type: string
The status of the container.
CreatedAt
Description
The optional filter to narrow the ListServiceDeployment
results.
If you do not specify a value, service deployments that were created before the current time are included in the result.
Members
- after
-
- Type: timestamp (string|DateTime or anything parsable by strtotime)
Include service deployments in the result that were created after this time. The format is yyyy-MM-dd HH:mm:ss.SSSSSS.
- before
-
- Type: timestamp (string|DateTime or anything parsable by strtotime)
Include service deployments in the result that were created before this time. The format is yyyy-MM-dd HH:mm:ss.SSSSSS.
Deployment
Description
The details of an Amazon ECS service deployment. This is used only when a service uses the ECS
deployment controller type.
Members
- capacityProviderStrategy
-
- Type: Array of CapacityProviderStrategyItem structures
The capacity provider strategy that the deployment is using.
- createdAt
-
- Type: timestamp (string|DateTime or anything parsable by strtotime)
The Unix timestamp for the time when the service deployment was created.
- desiredCount
-
- Type: int
The most recent desired count of tasks that was specified for the service to deploy or maintain.
- failedTasks
-
- Type: int
The number of consecutively failed tasks in the deployment. A task is considered a failure if the service scheduler can't launch the task, the task doesn't transition to a
RUNNING
state, or if it fails any of its defined health checks and is stopped.Once a service deployment has one or more successfully running tasks, the failed task count resets to zero and stops being evaluated.
- fargateEphemeralStorage
-
- Type: DeploymentEphemeralStorage structure
The Fargate ephemeral storage settings for the deployment.
- id
-
- Type: string
The ID of the deployment.
- launchType
-
- Type: string
The launch type the tasks in the service are using. For more information, see Amazon ECS Launch Types in the Amazon Elastic Container Service Developer Guide.
- networkConfiguration
-
- Type: NetworkConfiguration structure
The VPC subnet and security group configuration for tasks that receive their own elastic network interface by using the
awsvpc
networking mode. - pendingCount
-
- Type: int
The number of tasks in the deployment that are in the
PENDING
status. - platformFamily
-
- Type: string
The operating system that your tasks in the service, or tasks are running on. A platform family is specified only for tasks using the Fargate launch type.
All tasks that run as part of this service must use the same
platformFamily
value as the service, for example,LINUX.
. - platformVersion
-
- Type: string
The platform version that your tasks in the service run on. A platform version is only specified for tasks using the Fargate launch type. If one isn't specified, the
LATEST
platform version is used. For more information, see Fargate Platform Versions in the Amazon Elastic Container Service Developer Guide. - rolloutState
-
- Type: string
The
rolloutState
of a service is only returned for services that use the rolling update (ECS
) deployment type that aren't behind a Classic Load Balancer.The rollout state of the deployment. When a service deployment is started, it begins in an
IN_PROGRESS
state. When the service reaches a steady state, the deployment transitions to aCOMPLETED
state. If the service fails to reach a steady state and circuit breaker is turned on, the deployment transitions to aFAILED
state. A deployment inFAILED
state doesn't launch any new tasks. For more information, see DeploymentCircuitBreaker. - rolloutStateReason
-
- Type: string
A description of the rollout state of a deployment.
- runningCount
-
- Type: int
The number of tasks in the deployment that are in the
RUNNING
status. - serviceConnectConfiguration
-
- Type: ServiceConnectConfiguration structure
The details of the Service Connect configuration that's used by this deployment. Compare the configuration between multiple deployments when troubleshooting issues with new deployments.
The configuration for this service to discover and connect to services, and be discovered by, and connected from, other services within a namespace.
Tasks that run in a namespace can use short names to connect to services in the namespace. Tasks can connect to services across all of the clusters in the namespace. Tasks connect through a managed proxy container that collects logs and metrics for increased visibility. Only the tasks that Amazon ECS services create are supported with Service Connect. For more information, see Service Connect in the Amazon Elastic Container Service Developer Guide.
- serviceConnectResources
-
- Type: Array of ServiceConnectServiceResource structures
The list of Service Connect resources that are associated with this deployment. Each list entry maps a discovery name to a Cloud Map service name.
- status
-
- Type: string
The status of the deployment. The following describes each state.
- PRIMARY
-
The most recent deployment of a service.
- ACTIVE
-
A service deployment that still has running tasks, but are in the process of being replaced with a new
PRIMARY
deployment. - INACTIVE
-
A deployment that has been completely replaced.
- taskDefinition
-
- Type: string
The most recent task definition that was specified for the tasks in the service to use.
- updatedAt
-
- Type: timestamp (string|DateTime or anything parsable by strtotime)
The Unix timestamp for the time when the service deployment was last updated.
- volumeConfigurations
-
- Type: Array of ServiceVolumeConfiguration structures
The details of the volume that was
configuredAtLaunch
. You can configure different settings like the size, throughput, volumeType, and ecryption in ServiceManagedEBSVolumeConfiguration. Thename
of the volume must match thename
from the task definition.
DeploymentAlarms
Description
One of the methods which provide a way for you to quickly identify when a deployment has failed, and then to optionally roll back the failure to the last working deployment.
When the alarms are generated, Amazon ECS sets the service deployment to failed. Set the rollback parameter to have Amazon ECS to roll back your service to the last completed deployment after a failure.
You can only use the DeploymentAlarms
method to detect failures when the DeploymentController
is set to ECS
(rolling update).
For more information, see Rolling update in the Amazon Elastic Container Service Developer Guide .
Members
- alarmNames
-
- Required: Yes
- Type: Array of strings
One or more CloudWatch alarm names. Use a "," to separate the alarms.
- enable
-
- Required: Yes
- Type: boolean
Determines whether to use the CloudWatch alarm option in the service deployment process.
- rollback
-
- Required: Yes
- Type: boolean
Determines whether to configure Amazon ECS to roll back the service if a service deployment fails. If rollback is used, when a service deployment fails, the service is rolled back to the last deployment that completed successfully.
DeploymentCircuitBreaker
Description
The deployment circuit breaker can only be used for services using the rolling update (ECS
) deployment type.
The deployment circuit breaker determines whether a service deployment will fail if the service can't reach a steady state. If it is turned on, a service deployment will transition to a failed state and stop launching new tasks. You can also configure Amazon ECS to roll back your service to the last completed deployment after a failure. For more information, see Rolling update in the Amazon Elastic Container Service Developer Guide.
For more information about API failure reasons, see API failure reasons in the Amazon Elastic Container Service Developer Guide.
Members
- enable
-
- Required: Yes
- Type: boolean
Determines whether to use the deployment circuit breaker logic for the service.
- rollback
-
- Required: Yes
- Type: boolean
Determines whether to configure Amazon ECS to roll back the service if a service deployment fails. If rollback is on, when a service deployment fails, the service is rolled back to the last deployment that completed successfully.
DeploymentConfiguration
Description
Optional deployment parameters that control how many tasks run during the deployment and the failure detection methods.
Members
- alarms
-
- Type: DeploymentAlarms structure
Information about the CloudWatch alarms.
- deploymentCircuitBreaker
-
- Type: DeploymentCircuitBreaker structure
The deployment circuit breaker can only be used for services using the rolling update (
ECS
) deployment type.The deployment circuit breaker determines whether a service deployment will fail if the service can't reach a steady state. If you use the deployment circuit breaker, a service deployment will transition to a failed state and stop launching new tasks. If you use the rollback option, when a service deployment fails, the service is rolled back to the last deployment that completed successfully. For more information, see Rolling update in the Amazon Elastic Container Service Developer Guide
- maximumPercent
-
- Type: int
If a service is using the rolling update (
ECS
) deployment type, themaximumPercent
parameter represents an upper limit on the number of your service's tasks that are allowed in theRUNNING
orPENDING
state during a deployment, as a percentage of thedesiredCount
(rounded down to the nearest integer). This parameter enables you to define the deployment batch size. For example, if your service is using theREPLICA
service scheduler and has adesiredCount
of four tasks and amaximumPercent
value of 200%, the scheduler may start four new tasks before stopping the four older tasks (provided that the cluster resources required to do this are available). The defaultmaximumPercent
value for a service using theREPLICA
service scheduler is 200%.If a service is using either the blue/green (
CODE_DEPLOY
) orEXTERNAL
deployment types, and tasks in the service use the EC2 launch type, the maximum percent value is set to the default value. The maximum percent value is used to define the upper limit on the number of the tasks in the service that remain in theRUNNING
state while the container instances are in theDRAINING
state.You can't specify a custom
maximumPercent
value for a service that uses either the blue/green (CODE_DEPLOY
) orEXTERNAL
deployment types and has tasks that use the EC2 launch type.If the tasks in the service use the Fargate launch type, the maximum percent value is not used, although it is returned when describing your service.
- minimumHealthyPercent
-
- Type: int
If a service is using the rolling update (
ECS
) deployment type, theminimumHealthyPercent
represents a lower limit on the number of your service's tasks that must remain in theRUNNING
state during a deployment, as a percentage of thedesiredCount
(rounded up to the nearest integer). This parameter enables you to deploy without using additional cluster capacity. For example, if your service has adesiredCount
of four tasks and aminimumHealthyPercent
of 50%, the service scheduler may stop two existing tasks to free up cluster capacity before starting two new tasks.For services that do not use a load balancer, the following should be noted:
-
A service is considered healthy if all essential containers within the tasks in the service pass their health checks.
-
If a task has no essential containers with a health check defined, the service scheduler will wait for 40 seconds after a task reaches a
RUNNING
state before the task is counted towards the minimum healthy percent total. -
If a task has one or more essential containers with a health check defined, the service scheduler will wait for the task to reach a healthy status before counting it towards the minimum healthy percent total. A task is considered healthy when all essential containers within the task have passed their health checks. The amount of time the service scheduler can wait for is determined by the container health check settings.
For services that do use a load balancer, the following should be noted:
-
If a task has no essential containers with a health check defined, the service scheduler will wait for the load balancer target group health check to return a healthy status before counting the task towards the minimum healthy percent total.
-
If a task has an essential container with a health check defined, the service scheduler will wait for both the task to reach a healthy status and the load balancer target group health check to return a healthy status before counting the task towards the minimum healthy percent total.
The default value for a replica service for
minimumHealthyPercent
is 100%. The defaultminimumHealthyPercent
value for a service using theDAEMON
service schedule is 0% for the CLI, the Amazon Web Services SDKs, and the APIs and 50% for the Amazon Web Services Management Console.The minimum number of healthy tasks during a deployment is the
desiredCount
multiplied by theminimumHealthyPercent
/100, rounded up to the nearest integer value.If a service is using either the blue/green (
CODE_DEPLOY
) orEXTERNAL
deployment types and is running tasks that use the EC2 launch type, the minimum healthy percent value is set to the default value. The minimum healthy percent value is used to define the lower limit on the number of the tasks in the service that remain in theRUNNING
state while the container instances are in theDRAINING
state.You can't specify a custom
minimumHealthyPercent
value for a service that uses either the blue/green (CODE_DEPLOY
) orEXTERNAL
deployment types and has tasks that use the EC2 launch type.If a service is using either the blue/green (
CODE_DEPLOY
) orEXTERNAL
deployment types and is running tasks that use the Fargate launch type, the minimum healthy percent value is not used, although it is returned when describing your service.
DeploymentController
Description
The deployment controller to use for the service. For more information, see Amazon ECS deployment types in the Amazon Elastic Container Service Developer Guide.
Members
- type
-
- Required: Yes
- Type: string
The deployment controller type to use.
There are three deployment controller types available:
- ECS
-
The rolling update (
ECS
) deployment type involves replacing the current running version of the container with the latest version. The number of containers Amazon ECS adds or removes from the service during a rolling update is controlled by adjusting the minimum and maximum number of healthy tasks allowed during a service deployment, as specified in the DeploymentConfiguration. - CODE_DEPLOY
-
The blue/green (
CODE_DEPLOY
) deployment type uses the blue/green deployment model powered by CodeDeploy, which allows you to verify a new deployment of a service before sending production traffic to it. - EXTERNAL
-
The external (
EXTERNAL
) deployment type enables you to use any third-party deployment controller for full control over the deployment process for an Amazon ECS service.
DeploymentEphemeralStorage
Description
The amount of ephemeral storage to allocate for the deployment.
Members
- kmsKeyId
-
- Type: string
Specify an Amazon Web Services Key Management Service key ID to encrypt the ephemeral storage for deployment.
Device
Description
An object representing a container instance host device.
Members
- containerPath
-
- Type: string
The path inside the container at which to expose the host device.
- hostPath
-
- Required: Yes
- Type: string
The path for the device on the host container instance.
- permissions
-
- Type: Array of strings
The explicit permissions to provide to the container for the device. By default, the container has permissions for
read
,write
, andmknod
for the device.
DockerVolumeConfiguration
Description
This parameter is specified when you're using Docker volumes. Docker volumes are only supported when you're using the EC2 launch type. Windows containers only support the use of the local
driver. To use bind mounts, specify a host
instead.
Members
- autoprovision
-
- Type: boolean
If this value is
true
, the Docker volume is created if it doesn't already exist.This field is only used if the
scope
isshared
. - driver
-
- Type: string
The Docker volume driver to use. The driver value must match the driver name provided by Docker because it is used for task placement. If the driver was installed using the Docker plugin CLI, use
docker plugin ls
to retrieve the driver name from your container instance. If the driver was installed using another method, use Docker plugin discovery to retrieve the driver name. This parameter maps toDriver
in the docker container create command and thexxdriver
option to docker volume create. - driverOpts
-
- Type: Associative array of custom strings keys (String) to strings
A map of Docker driver-specific options passed through. This parameter maps to
DriverOpts
in the docker create-volume command and thexxopt
option to docker volume create. - labels
-
- Type: Associative array of custom strings keys (String) to strings
Custom metadata to add to your Docker volume. This parameter maps to
Labels
in the docker container create command and thexxlabel
option to docker volume create. - scope
-
- Type: string
The scope for the Docker volume that determines its lifecycle. Docker volumes that are scoped to a
task
are automatically provisioned when the task starts and destroyed when the task stops. Docker volumes that are scoped asshared
persist after the task stops.
EBSTagSpecification
Description
The tag specifications of an Amazon EBS volume.
Members
- propagateTags
-
- Type: string
Determines whether to propagate the tags from the task definition to the Amazon EBS volume. Tags can only propagate to a
SERVICE
specified inServiceVolumeConfiguration
. If no value is specified, the tags aren't propagated. - resourceType
-
- Required: Yes
- Type: string
The type of volume resource.
- tags
-
- Type: Array of Tag structures
The tags applied to this Amazon EBS volume.
AmazonECSCreated
andAmazonECSManaged
are reserved tags that can't be used.
EFSAuthorizationConfig
Description
The authorization configuration details for the Amazon EFS file system.
Members
- accessPointId
-
- Type: string
The Amazon EFS access point ID to use. If an access point is specified, the root directory value specified in the
EFSVolumeConfiguration
must either be omitted or set to/
which will enforce the path set on the EFS access point. If an access point is used, transit encryption must be on in theEFSVolumeConfiguration
. For more information, see Working with Amazon EFS access points in the Amazon Elastic File System User Guide. - iam
-
- Type: string
Determines whether to use the Amazon ECS task role defined in a task definition when mounting the Amazon EFS file system. If it is turned on, transit encryption must be turned on in the
EFSVolumeConfiguration
. If this parameter is omitted, the default value ofDISABLED
is used. For more information, see Using Amazon EFS access points in the Amazon Elastic Container Service Developer Guide.
EFSVolumeConfiguration
Description
This parameter is specified when you're using an Amazon Elastic File System file system for task storage. For more information, see Amazon EFS volumes in the Amazon Elastic Container Service Developer Guide.
Members
- authorizationConfig
-
- Type: EFSAuthorizationConfig structure
The authorization configuration details for the Amazon EFS file system.
- fileSystemId
-
- Required: Yes
- Type: string
The Amazon EFS file system ID to use.
- rootDirectory
-
- Type: string
The directory within the Amazon EFS file system to mount as the root directory inside the host. If this parameter is omitted, the root of the Amazon EFS volume will be used. Specifying
/
will have the same effect as omitting this parameter.If an EFS access point is specified in the
authorizationConfig
, the root directory parameter must either be omitted or set to/
which will enforce the path set on the EFS access point. - transitEncryption
-
- Type: string
Determines whether to use encryption for Amazon EFS data in transit between the Amazon ECS host and the Amazon EFS server. Transit encryption must be turned on if Amazon EFS IAM authorization is used. If this parameter is omitted, the default value of
DISABLED
is used. For more information, see Encrypting data in transit in the Amazon Elastic File System User Guide. - transitEncryptionPort
-
- Type: int
The port to use when sending encrypted data between the Amazon ECS host and the Amazon EFS server. If you do not specify a transit encryption port, it will use the port selection strategy that the Amazon EFS mount helper uses. For more information, see EFS mount helper in the Amazon Elastic File System User Guide.
EnvironmentFile
Description
A list of files containing the environment variables to pass to a container. You can specify up to ten environment files. The file must have a .env
file extension. Each line in an environment file should contain an environment variable in VARIABLE=VALUE
format. Lines beginning with #
are treated as comments and are ignored.
If there are environment variables specified using the environment
parameter in a container definition, they take precedence over the variables contained within an environment file. If multiple environment files are specified that contain the same variable, they're processed from the top down. We recommend that you use unique variable names. For more information, see Use a file to pass environment variables to a container in the Amazon Elastic Container Service Developer Guide.
Environment variable files are objects in Amazon S3 and all Amazon S3 security considerations apply.
You must use the following platforms for the Fargate launch type:
-
Linux platform version
1.4.0
or later. -
Windows platform version
1.0.0
or later.
Consider the following when using the Fargate launch type:
-
The file is handled like a native Docker env-file.
-
There is no support for shell escape handling.
-
The container entry point interperts the
VARIABLE
values.
Members
- type
-
- Required: Yes
- Type: string
The file type to use. Environment files are objects in Amazon S3. The only supported value is
s3
. - value
-
- Required: Yes
- Type: string
The Amazon Resource Name (ARN) of the Amazon S3 object containing the environment variable file.
EphemeralStorage
Description
The amount of ephemeral storage to allocate for the task. This parameter is used to expand the total amount of ephemeral storage available, beyond the default amount, for tasks hosted on Fargate. For more information, see Using data volumes in tasks in the Amazon ECS Developer Guide;.
For tasks using the Fargate launch type, the task requires the following platforms:
-
Linux platform version
1.4.0
or later. -
Windows platform version
1.0.0
or later.
Members
- sizeInGiB
-
- Required: Yes
- Type: int
The total amount, in GiB, of ephemeral storage to set for the task. The minimum supported value is
20
GiB and the maximum supported value is200
GiB.
ExecuteCommandConfiguration
Description
The details of the execute command configuration.
Members
- kmsKeyId
-
- Type: string
Specify an Key Management Service key ID to encrypt the data between the local client and the container.
- logConfiguration
-
- Type: ExecuteCommandLogConfiguration structure
The log configuration for the results of the execute command actions. The logs can be sent to CloudWatch Logs or an Amazon S3 bucket. When
logging=OVERRIDE
is specified, alogConfiguration
must be provided. - logging
-
- Type: string
The log setting to use for redirecting logs for your execute command results. The following log settings are available.
-
NONE
: The execute command session is not logged. -
DEFAULT
: Theawslogs
configuration in the task definition is used. If no logging parameter is specified, it defaults to this value. If noawslogs
log driver is configured in the task definition, the output won't be logged. -
OVERRIDE
: Specify the logging details as a part oflogConfiguration
. If theOVERRIDE
logging option is specified, thelogConfiguration
is required.
ExecuteCommandLogConfiguration
Description
The log configuration for the results of the execute command actions. The logs can be sent to CloudWatch Logs or an Amazon S3 bucket.
Members
- cloudWatchEncryptionEnabled
-
- Type: boolean
Determines whether to use encryption on the CloudWatch logs. If not specified, encryption will be off.
- cloudWatchLogGroupName
-
- Type: string
The name of the CloudWatch log group to send logs to.
The CloudWatch log group must already be created.
- s3BucketName
-
- Type: string
The name of the S3 bucket to send logs to.
The S3 bucket must already be created.
- s3EncryptionEnabled
-
- Type: boolean
Determines whether to use encryption on the S3 logs. If not specified, encryption is not used.
- s3KeyPrefix
-
- Type: string
An optional folder in the S3 bucket to place logs in.
FSxWindowsFileServerAuthorizationConfig
Description
The authorization configuration details for Amazon FSx for Windows File Server file system. See FSxWindowsFileServerVolumeConfiguration in the Amazon ECS API Reference.
For more information and the input format, see Amazon FSx for Windows File Server Volumes in the Amazon Elastic Container Service Developer Guide.
Members
- credentialsParameter
-
- Required: Yes
- Type: string
The authorization credential option to use. The authorization credential options can be provided using either the Amazon Resource Name (ARN) of an Secrets Manager secret or SSM Parameter Store parameter. The ARN refers to the stored credentials.
- domain
-
- Required: Yes
- Type: string
A fully qualified domain name hosted by an Directory Service Managed Microsoft AD (Active Directory) or self-hosted AD on Amazon EC2.
FSxWindowsFileServerVolumeConfiguration
Description
This parameter is specified when you're using Amazon FSx for Windows File Server file system for task storage.
For more information and the input format, see Amazon FSx for Windows File Server volumes in the Amazon Elastic Container Service Developer Guide.
Members
- authorizationConfig
-
- Required: Yes
- Type: FSxWindowsFileServerAuthorizationConfig structure
The authorization configuration details for the Amazon FSx for Windows File Server file system.
- fileSystemId
-
- Required: Yes
- Type: string
The Amazon FSx for Windows File Server file system ID to use.
- rootDirectory
-
- Required: Yes
- Type: string
The directory within the Amazon FSx for Windows File Server file system to mount as the root directory inside the host.
Failure
Description
A failed resource. For a list of common causes, see API failure reasons in the Amazon Elastic Container Service Developer Guide.
Members
- arn
-
- Type: string
The Amazon Resource Name (ARN) of the failed resource.
- detail
-
- Type: string
The details of the failure.
- reason
-
- Type: string
The reason for the failure.
FirelensConfiguration
Description
The FireLens configuration for the container. This is used to specify and configure a log router for container logs. For more information, see Custom log routing in the Amazon Elastic Container Service Developer Guide.
Members
- options
-
- Type: Associative array of custom strings keys (String) to strings
The options to use when configuring the log router. This field is optional and can be used to specify a custom configuration file or to add additional metadata, such as the task, task definition, cluster, and container instance details to the log event. If specified, the syntax to use is
"options":{"enable-ecs-log-metadata":"true|false","config-file-type:"s3|file","config-file-value":"arn:aws:s3:::mybucket/fluent.conf|filepath"}
. For more information, see Creating a task definition that uses a FireLens configuration in the Amazon Elastic Container Service Developer Guide.Tasks hosted on Fargate only support the
file
configuration file type. - type
-
- Required: Yes
- Type: string
The log router to use. The valid values are
fluentd
orfluentbit
.
HealthCheck
Description
An object representing a container health check. Health check parameters that are specified in a container definition override any Docker health checks that exist in the container image (such as those specified in a parent image or from the image's Dockerfile). This configuration maps to the HEALTHCHECK
parameter of docker run.
The Amazon ECS container agent only monitors and reports on the health checks specified in the task definition. Amazon ECS does not monitor Docker health checks that are embedded in a container image and not specified in the container definition. Health check parameters that are specified in a container definition override any Docker health checks that exist in the container image.
You can view the health status of both individual containers and a task with the DescribeTasks API operation or when viewing the task details in the console.
The health check is designed to make sure that your containers survive agent restarts, upgrades, or temporary unavailability.
Amazon ECS performs health checks on containers with the default that launched the container instance or the task.
The following describes the possible healthStatus
values for a container:
-
HEALTHY
-The container health check has passed successfully. -
UNHEALTHY
-The container health check has failed. -
UNKNOWN
-The container health check is being evaluated, there's no container health check defined, or Amazon ECS doesn't have the health status of the container.
The following describes the possible healthStatus
values based on the container health checker status of essential containers in the task with the following priority order (high to low):
-
UNHEALTHY
-One or more essential containers have failed their health check. -
UNKNOWN
-Any essential container running within the task is in anUNKNOWN
state and no other essential containers have anUNHEALTHY
state. -
HEALTHY
-All essential containers within the task have passed their health checks.
Consider the following task health example with 2 containers.
-
If Container1 is
UNHEALTHY
and Container2 isUNKNOWN
, the task health isUNHEALTHY
. -
If Container1 is
UNHEALTHY
and Container2 isHEALTHY
, the task health isUNHEALTHY
. -
If Container1 is
HEALTHY
and Container2 isUNKNOWN
, the task health isUNKNOWN
. -
If Container1 is
HEALTHY
and Container2 isHEALTHY
, the task health isHEALTHY
.
Consider the following task health example with 3 containers.
-
If Container1 is
UNHEALTHY
and Container2 isUNKNOWN
, and Container3 isUNKNOWN
, the task health isUNHEALTHY
. -
If Container1 is
UNHEALTHY
and Container2 isUNKNOWN
, and Container3 isHEALTHY
, the task health isUNHEALTHY
. -
If Container1 is
UNHEALTHY
and Container2 isHEALTHY
, and Container3 isHEALTHY
, the task health isUNHEALTHY
. -
If Container1 is
HEALTHY
and Container2 isUNKNOWN
, and Container3 isHEALTHY
, the task health isUNKNOWN
. -
If Container1 is
HEALTHY
and Container2 isUNKNOWN
, and Container3 isUNKNOWN
, the task health isUNKNOWN
. -
If Container1 is
HEALTHY
and Container2 isHEALTHY
, and Container3 isHEALTHY
, the task health isHEALTHY
.
If a task is run manually, and not as part of a service, the task will continue its lifecycle regardless of its health status. For tasks that are part of a service, if the task reports as unhealthy then the task will be stopped and the service scheduler will replace it.
The following are notes about container health check support:
-
If the Amazon ECS container agent becomes disconnected from the Amazon ECS service, this won't cause a container to transition to an
UNHEALTHY
status. This is by design, to ensure that containers remain running during agent restarts or temporary unavailability. The health check status is the "last heard from" response from the Amazon ECS agent, so if the container was consideredHEALTHY
prior to the disconnect, that status will remain until the agent reconnects and another health check occurs. There are no assumptions made about the status of the container health checks. -
Container health checks require version
1.17.0
or greater of the Amazon ECS container agent. For more information, see Updating the Amazon ECS container agent. -
Container health checks are supported for Fargate tasks if you're using platform version
1.1.0
or greater. For more information, see Fargate platform versions. -
Container health checks aren't supported for tasks that are part of a service that's configured to use a Classic Load Balancer.
Members
- command
-
- Required: Yes
- Type: Array of strings
A string array representing the command that the container runs to determine if it is healthy. The string array must start with
CMD
to run the command arguments directly, orCMD-SHELL
to run the command with the container's default shell.When you use the Amazon Web Services Management Console JSON panel, the Command Line Interface, or the APIs, enclose the list of commands in double quotes and brackets.
[ "CMD-SHELL", "curl -f http://localhost/ || exit 1" ]
You don't include the double quotes and brackets when you use the Amazon Web Services Management Console.
CMD-SHELL, curl -f http://localhost/ || exit 1
An exit code of 0 indicates success, and non-zero exit code indicates failure. For more information, see
HealthCheck
in the docker container create command. - interval
-
- Type: int
The time period in seconds between each health check execution. You may specify between 5 and 300 seconds. The default value is 30 seconds.
- retries
-
- Type: int
The number of times to retry a failed health check before the container is considered unhealthy. You may specify between 1 and 10 retries. The default value is 3.
- startPeriod
-
- Type: int
The optional grace period to provide containers time to bootstrap before failed health checks count towards the maximum number of retries. You can specify between 0 and 300 seconds. By default, the
startPeriod
is off.If a health check succeeds within the
startPeriod
, then the container is considered healthy and any subsequent failures count toward the maximum number of retries. - timeout
-
- Type: int
The time period in seconds to wait for a health check to succeed before it is considered a failure. You may specify between 2 and 60 seconds. The default value is 5.
HostEntry
Description
Hostnames and IP address entries that are added to the /etc/hosts
file of a container via the extraHosts
parameter of its ContainerDefinition.
Members
- hostname
-
- Required: Yes
- Type: string
The hostname to use in the
/etc/hosts
entry. - ipAddress
-
- Required: Yes
- Type: string
The IP address to use in the
/etc/hosts
entry.
HostVolumeProperties
Description
Details on a container instance bind mount host volume.
Members
- sourcePath
-
- Type: string
When the
host
parameter is used, specify asourcePath
to declare the path on the host container instance that's presented to the container. If this parameter is empty, then the Docker daemon has assigned a host path for you. If thehost
parameter contains asourcePath
file location, then the data volume persists at the specified location on the host container instance until you delete it manually. If thesourcePath
value doesn't exist on the host container instance, the Docker daemon creates it. If the location does exist, the contents of the source path folder are exported.If you're using the Fargate launch type, the
sourcePath
parameter is not supported.
InferenceAccelerator
Description
Details on an Elastic Inference accelerator. For more information, see Working with Amazon Elastic Inference on Amazon ECS in the Amazon Elastic Container Service Developer Guide.
Members
- deviceName
-
- Required: Yes
- Type: string
The Elastic Inference accelerator device name. The
deviceName
must also be referenced in a container definition as a ResourceRequirement. - deviceType
-
- Required: Yes
- Type: string
The Elastic Inference accelerator type to use.
InferenceAcceleratorOverride
Description
Details on an Elastic Inference accelerator task override. This parameter is used to override the Elastic Inference accelerator specified in the task definition. For more information, see Working with Amazon Elastic Inference on Amazon ECS in the Amazon Elastic Container Service Developer Guide.
Members
- deviceName
-
- Type: string
The Elastic Inference accelerator device name to override for the task. This parameter must match a
deviceName
specified in the task definition. - deviceType
-
- Type: string
The Elastic Inference accelerator type to use.
InstanceHealthCheckResult
Description
An object representing the result of a container instance health status check.
Members
- lastStatusChange
-
- Type: timestamp (string|DateTime or anything parsable by strtotime)
The Unix timestamp for when the container instance health status last changed.
- lastUpdated
-
- Type: timestamp (string|DateTime or anything parsable by strtotime)
The Unix timestamp for when the container instance health status was last updated.
- status
-
- Type: string
The container instance health status.
- type
-
- Type: string
The type of container instance health status that was verified.
InvalidParameterException
Description
The specified parameter isn't valid. Review the available parameters for the API request.
Members
KernelCapabilities
Description
The Linux capabilities to add or remove from the default Docker configuration for a container defined in the task definition. For more detailed information about these Linux capabilities, see the capabilities(7) Linux manual page.
Members
- add
-
- Type: Array of strings
The Linux capabilities for the container that have been added to the default configuration provided by Docker. This parameter maps to
CapAdd
in the docker container create command and the--cap-add
option to docker run.Tasks launched on Fargate only support adding the
SYS_PTRACE
kernel capability.Valid values:
"ALL" | "AUDIT_CONTROL" | "AUDIT_WRITE" | "BLOCK_SUSPEND" | "CHOWN" | "DAC_OVERRIDE" | "DAC_READ_SEARCH" | "FOWNER" | "FSETID" | "IPC_LOCK" | "IPC_OWNER" | "KILL" | "LEASE" | "LINUX_IMMUTABLE" | "MAC_ADMIN" | "MAC_OVERRIDE" | "MKNOD" | "NET_ADMIN" | "NET_BIND_SERVICE" | "NET_BROADCAST" | "NET_RAW" | "SETFCAP" | "SETGID" | "SETPCAP" | "SETUID" | "SYS_ADMIN" | "SYS_BOOT" | "SYS_CHROOT" | "SYS_MODULE" | "SYS_NICE" | "SYS_PACCT" | "SYS_PTRACE" | "SYS_RAWIO" | "SYS_RESOURCE" | "SYS_TIME" | "SYS_TTY_CONFIG" | "SYSLOG" | "WAKE_ALARM"
- drop
-
- Type: Array of strings
The Linux capabilities for the container that have been removed from the default configuration provided by Docker. This parameter maps to
CapDrop
in the docker container create command and the--cap-drop
option to docker run.Valid values:
"ALL" | "AUDIT_CONTROL" | "AUDIT_WRITE" | "BLOCK_SUSPEND" | "CHOWN" | "DAC_OVERRIDE" | "DAC_READ_SEARCH" | "FOWNER" | "FSETID" | "IPC_LOCK" | "IPC_OWNER" | "KILL" | "LEASE" | "LINUX_IMMUTABLE" | "MAC_ADMIN" | "MAC_OVERRIDE" | "MKNOD" | "NET_ADMIN" | "NET_BIND_SERVICE" | "NET_BROADCAST" | "NET_RAW" | "SETFCAP" | "SETGID" | "SETPCAP" | "SETUID" | "SYS_ADMIN" | "SYS_BOOT" | "SYS_CHROOT" | "SYS_MODULE" | "SYS_NICE" | "SYS_PACCT" | "SYS_PTRACE" | "SYS_RAWIO" | "SYS_RESOURCE" | "SYS_TIME" | "SYS_TTY_CONFIG" | "SYSLOG" | "WAKE_ALARM"
KeyValuePair
Description
A key-value pair object.
Members
- name
-
- Type: string
The name of the key-value pair. For environment variables, this is the name of the environment variable.
- value
-
- Type: string
The value of the key-value pair. For environment variables, this is the value of the environment variable.
LimitExceededException
Description
The limit for the resource was exceeded.
Members
LinuxParameters
Description
The Linux-specific options that are applied to the container, such as Linux KernelCapabilities.
Members
- capabilities
-
- Type: KernelCapabilities structure
The Linux capabilities for the container that are added to or dropped from the default configuration provided by Docker.
For tasks that use the Fargate launch type,
capabilities
is supported for all platform versions but theadd
parameter is only supported if using platform version 1.4.0 or later. - devices
-
- Type: Array of Device structures
Any host devices to expose to the container. This parameter maps to
Devices
in the docker container create command and the--device
option to docker run.If you're using tasks that use the Fargate launch type, the
devices
parameter isn't supported. - initProcessEnabled
-
- Type: boolean
Run an
init
process inside the container that forwards signals and reaps processes. This parameter maps to the--init
option to docker run. This parameter requires version 1.25 of the Docker Remote API or greater on your container instance. To check the Docker Remote API version on your container instance, log in to your container instance and run the following command:sudo docker version --format '{{.Server.APIVersion}}'
- maxSwap
-
- Type: int
The total amount of swap memory (in MiB) a container can use. This parameter will be translated to the
--memory-swap
option to docker run where the value would be the sum of the container memory plus themaxSwap
value.If a
maxSwap
value of0
is specified, the container will not use swap. Accepted values are0
or any positive integer. If themaxSwap
parameter is omitted, the container will use the swap configuration for the container instance it is running on. AmaxSwap
value must be set for theswappiness
parameter to be used.If you're using tasks that use the Fargate launch type, the
maxSwap
parameter isn't supported.If you're using tasks on Amazon Linux 2023 the
swappiness
parameter isn't supported. - sharedMemorySize
-
- Type: int
The value for the size (in MiB) of the
/dev/shm
volume. This parameter maps to the--shm-size
option to docker run.If you are using tasks that use the Fargate launch type, the
sharedMemorySize
parameter is not supported. - swappiness
-
- Type: int
This allows you to tune a container's memory swappiness behavior. A
swappiness
value of0
will cause swapping to not happen unless absolutely necessary. Aswappiness
value of100
will cause pages to be swapped very aggressively. Accepted values are whole numbers between0
and100
. If theswappiness
parameter is not specified, a default value of60
is used. If a value is not specified formaxSwap
then this parameter is ignored. This parameter maps to the--memory-swappiness
option to docker run.If you're using tasks that use the Fargate launch type, the
swappiness
parameter isn't supported.If you're using tasks on Amazon Linux 2023 the
swappiness
parameter isn't supported. - tmpfs
-
- Type: Array of Tmpfs structures
The container path, mount options, and size (in MiB) of the tmpfs mount. This parameter maps to the
--tmpfs
option to docker run.If you're using tasks that use the Fargate launch type, the
tmpfs
parameter isn't supported.
LoadBalancer
Description
The load balancer configuration to use with a service or task set.
When you add, update, or remove a load balancer configuration, Amazon ECS starts a new deployment with the updated Elastic Load Balancing configuration. This causes tasks to register to and deregister from load balancers.
We recommend that you verify this on a test environment before you update the Elastic Load Balancing configuration.
A service-linked role is required for services that use multiple target groups. For more information, see Using service-linked roles in the Amazon Elastic Container Service Developer Guide.
Members
- containerName
-
- Type: string
The name of the container (as it appears in a container definition) to associate with the load balancer.
You need to specify the container name when configuring the target group for an Amazon ECS load balancer.
- containerPort
-
- Type: int
The port on the container to associate with the load balancer. This port must correspond to a
containerPort
in the task definition the tasks in the service are using. For tasks that use the EC2 launch type, the container instance they're launched on must allow ingress traffic on thehostPort
of the port mapping. - loadBalancerName
-
- Type: string
The name of the load balancer to associate with the service or task set.
If you are using an Application Load Balancer or a Network Load Balancer the load balancer name parameter should be omitted.
- targetGroupArn
-
- Type: string
The full Amazon Resource Name (ARN) of the Elastic Load Balancing target group or groups associated with a service or task set.
A target group ARN is only specified when using an Application Load Balancer or Network Load Balancer.
For services using the
ECS
deployment controller, you can specify one or multiple target groups. For more information, see Registering multiple target groups with a service in the Amazon Elastic Container Service Developer Guide.For services using the
CODE_DEPLOY
deployment controller, you're required to define two target groups for the load balancer. For more information, see Blue/green deployment with CodeDeploy in the Amazon Elastic Container Service Developer Guide.If your service's task definition uses the
awsvpc
network mode, you must chooseip
as the target type, notinstance
. Do this when creating your target groups because tasks that use theawsvpc
network mode are associated with an elastic network interface, not an Amazon EC2 instance. This network mode is required for the Fargate launch type.
LogConfiguration
Description
The log configuration for the container. This parameter maps to LogConfig
in the docker container create command and the --log-driver
option to docker run.
By default, containers use the same logging driver that the Docker daemon uses. However, the container might use a different logging driver than the Docker daemon by specifying a log driver configuration in the container definition.
Understand the following when specifying a log configuration for your containers.
-
Amazon ECS currently supports a subset of the logging drivers available to the Docker daemon. Additional log drivers may be available in future releases of the Amazon ECS container agent.
For tasks on Fargate, the supported log drivers are
awslogs
,splunk
, andawsfirelens
.For tasks hosted on Amazon EC2 instances, the supported log drivers are
awslogs
,fluentd
,gelf
,json-file
,journald
,syslog
,splunk
, andawsfirelens
. -
This parameter requires version 1.18 of the Docker Remote API or greater on your container instance.
-
For tasks that are hosted on Amazon EC2 instances, the Amazon ECS container agent must register the available logging drivers with the
ECS_AVAILABLE_LOGGING_DRIVERS
environment variable before containers placed on that instance can use these log configuration options. For more information, see Amazon ECS container agent configuration in the Amazon Elastic Container Service Developer Guide. -
For tasks that are on Fargate, because you don't have access to the underlying infrastructure your tasks are hosted on, any additional software needed must be installed outside of the task. For example, the Fluentd output aggregators or a remote host running Logstash to send Gelf logs to.
Members
- logDriver
-
- Required: Yes
- Type: string
The log driver to use for the container.
For tasks on Fargate, the supported log drivers are
awslogs
,splunk
, andawsfirelens
.For tasks hosted on Amazon EC2 instances, the supported log drivers are
awslogs
,fluentd
,gelf
,json-file
,journald
,syslog
,splunk
, andawsfirelens
.For more information about using the
awslogs
log driver, see Send Amazon ECS logs to CloudWatch in the Amazon Elastic Container Service Developer Guide.For more information about using the
awsfirelens
log driver, see Send Amazon ECS logs to an Amazon Web Services service or Amazon Web Services Partner.If you have a custom driver that isn't listed, you can fork the Amazon ECS container agent project that's available on GitHub and customize it to work with that driver. We encourage you to submit pull requests for changes that you would like to have included. However, we don't currently provide support for running modified copies of this software.
- options
-
- Type: Associative array of custom strings keys (String) to strings
The configuration options to send to the log driver.
The options you can specify depend on the log driver. Some of the options you can specify when you use the
awslogs
log driver to route logs to Amazon CloudWatch include the following:- awslogs-create-group
-
Required: No
Specify whether you want the log group to be created automatically. If this option isn't specified, it defaults to
false
.Your IAM policy must include the
logs:CreateLogGroup
permission before you attempt to useawslogs-create-group
. - awslogs-region
-
Required: Yes
Specify the Amazon Web Services Region that the
awslogs
log driver is to send your Docker logs to. You can choose to send all of your logs from clusters in different Regions to a single region in CloudWatch Logs. This is so that they're all visible in one location. Otherwise, you can separate them by Region for more granularity. Make sure that the specified log group exists in the Region that you specify with this option. - awslogs-group
-
Required: Yes
Make sure to specify a log group that the
awslogs
log driver sends its log streams to. - awslogs-stream-prefix
-
Required: Yes, when using the Fargate launch type.Optional for the EC2 launch type, required for the Fargate launch type.
Use the
awslogs-stream-prefix
option to associate a log stream with the specified prefix, the container name, and the ID of the Amazon ECS task that the container belongs to. If you specify a prefix with this option, then the log stream takes the formatprefix-name/container-name/ecs-task-id
.If you don't specify a prefix with this option, then the log stream is named after the container ID that's assigned by the Docker daemon on the container instance. Because it's difficult to trace logs back to the container that sent them with just the Docker container ID (which is only available on the container instance), we recommend that you specify a prefix with this option.
For Amazon ECS services, you can use the service name as the prefix. Doing so, you can trace log streams to the service that the container belongs to, the name of the container that sent them, and the ID of the task that the container belongs to.
You must specify a stream-prefix for your logs to have your logs appear in the Log pane when using the Amazon ECS console.
- awslogs-datetime-format
-
Required: No
This option defines a multiline start pattern in Python
strftime
format. A log message consists of a line that matches the pattern and any following lines that don’t match the pattern. The matched line is the delimiter between log messages.One example of a use case for using this format is for parsing output such as a stack dump, which might otherwise be logged in multiple entries. The correct pattern allows it to be captured in a single entry.
For more information, see awslogs-datetime-format.
You cannot configure both the
awslogs-datetime-format
andawslogs-multiline-pattern
options.Multiline logging performs regular expression parsing and matching of all log messages. This might have a negative impact on logging performance.
- awslogs-multiline-pattern
-
Required: No
This option defines a multiline start pattern that uses a regular expression. A log message consists of a line that matches the pattern and any following lines that don’t match the pattern. The matched line is the delimiter between log messages.
For more information, see awslogs-multiline-pattern.
This option is ignored if
awslogs-datetime-format
is also configured.You cannot configure both the
awslogs-datetime-format
andawslogs-multiline-pattern
options.Multiline logging performs regular expression parsing and matching of all log messages. This might have a negative impact on logging performance.
- mode
-
Required: No
Valid values:
non-blocking
|blocking
This option defines the delivery mode of log messages from the container to CloudWatch Logs. The delivery mode you choose affects application availability when the flow of logs from container to CloudWatch is interrupted.
If you use the
blocking
mode and the flow of logs to CloudWatch is interrupted, calls from container code to write to thestdout
andstderr
streams will block. The logging thread of the application will block as a result. This may cause the application to become unresponsive and lead to container healthcheck failure.If you use the
non-blocking
mode, the container's logs are instead stored in an in-memory intermediate buffer configured with themax-buffer-size
option. This prevents the application from becoming unresponsive when logs cannot be sent to CloudWatch. We recommend using this mode if you want to ensure service availability and are okay with some log loss. For more information, see Preventing log loss with non-blocking mode in theawslogs
container log driver. - max-buffer-size
-
Required: No
Default value:
1m
When
non-blocking
mode is used, themax-buffer-size
log option controls the size of the buffer that's used for intermediate message storage. Make sure to specify an adequate buffer size based on your application. When the buffer fills up, further logs cannot be stored. Logs that cannot be stored are lost.
To route logs using the
splunk
log router, you need to specify asplunk-token
and asplunk-url
.When you use the
awsfirelens
log router to route logs to an Amazon Web Services Service or Amazon Web Services Partner Network destination for log storage and analytics, you can set thelog-driver-buffer-limit
option to limit the number of events that are buffered in memory, before being sent to the log router container. It can help to resolve potential log loss issue because high throughput might result in memory running out for the buffer inside of Docker.Other options you can specify when using
awsfirelens
to route logs depend on the destination. When you export logs to Amazon Data Firehose, you can specify the Amazon Web Services Region withregion
and a name for the log stream withdelivery_stream
.When you export logs to Amazon Kinesis Data Streams, you can specify an Amazon Web Services Region with
region
and a data stream name withstream
.When you export logs to Amazon OpenSearch Service, you can specify options like
Name
,Host
(OpenSearch Service endpoint without protocol),Port
,Index
,Type
,Aws_auth
,Aws_region
,Suppress_Type_Name
, andtls
.When you export logs to Amazon S3, you can specify the bucket using the
bucket
option. You can also specifyregion
,total_file_size
,upload_timeout
, anduse_put_object
as options.This parameter requires version 1.19 of the Docker Remote API or greater on your container instance. To check the Docker Remote API version on your container instance, log in to your container instance and run the following command:
sudo docker version --format '{{.Server.APIVersion}}'
- secretOptions
-
- Type: Array of Secret structures
The secrets to pass to the log configuration. For more information, see Specifying sensitive data in the Amazon Elastic Container Service Developer Guide.
ManagedAgent
Description
Details about the managed agent status for the container.
Members
- lastStartedAt
-
- Type: timestamp (string|DateTime or anything parsable by strtotime)
The Unix timestamp for the time when the managed agent was last started.
- lastStatus
-
- Type: string
The last known status of the managed agent.
- name
-
- Type: string
The name of the managed agent. When the execute command feature is turned on, the managed agent name is
ExecuteCommandAgent
. - reason
-
- Type: string
The reason for why the managed agent is in the state it is in.
ManagedAgentStateChange
Description
An object representing a change in state for a managed agent.
Members
- containerName
-
- Required: Yes
- Type: string
The name of the container that's associated with the managed agent.
- managedAgentName
-
- Required: Yes
- Type: string
The name of the managed agent.
- reason
-
- Type: string
The reason for the status of the managed agent.
- status
-
- Required: Yes
- Type: string
The status of the managed agent.
ManagedScaling
Description
The managed scaling settings for the Auto Scaling group capacity provider.
When managed scaling is turned on, Amazon ECS manages the scale-in and scale-out actions of the Auto Scaling group. Amazon ECS manages a target tracking scaling policy using an Amazon ECS managed CloudWatch metric with the specified targetCapacity
value as the target value for the metric. For more information, see Using managed scaling in the Amazon Elastic Container Service Developer Guide.
If managed scaling is off, the user must manage the scaling of the Auto Scaling group.
Members
- instanceWarmupPeriod
-
- Type: int
The period of time, in seconds, after a newly launched Amazon EC2 instance can contribute to CloudWatch metrics for Auto Scaling group. If this parameter is omitted, the default value of
300
seconds is used. - maximumScalingStepSize
-
- Type: int
The maximum number of Amazon EC2 instances that Amazon ECS will scale out at one time. If this parameter is omitted, the default value of
10000
is used. - minimumScalingStepSize
-
- Type: int
The minimum number of Amazon EC2 instances that Amazon ECS will scale out at one time. If this parameter is omitted, the default value of
1
is used.When additional capacity is required, Amazon ECS will scale up the minimum scaling step size even if the actual demand is less than the minimum scaling step size.
If you use a capacity provider with an Auto Scaling group configured with more than one Amazon EC2 instance type or Availability Zone, Amazon ECS will scale up by the exact minimum scaling step size value and will ignore both the maximum scaling step size as well as the capacity demand.
- status
-
- Type: string
Determines whether to use managed scaling for the capacity provider.
- targetCapacity
-
- Type: int
The target capacity utilization as a percentage for the capacity provider. The specified value must be greater than
0
and less than or equal to100
. For example, if you want the capacity provider to maintain 10% spare capacity, then that means the utilization is 90%, so use atargetCapacity
of90
. The default value of100
percent results in the Amazon EC2 instances in your Auto Scaling group being completely used.
ManagedStorageConfiguration
Description
The managed storage configuration for the cluster.
Members
- fargateEphemeralStorageKmsKeyId
-
- Type: string
Specify the Key Management Service key ID for the Fargate ephemeral storage.
- kmsKeyId
-
- Type: string
Specify a Amazon Web Services Key Management Service key ID to encrypt the managed storage.
MissingVersionException
Description
Amazon ECS can't determine the current version of the Amazon ECS container agent on the container instance and doesn't have enough information to proceed with an update. This could be because the agent running on the container instance is a previous or custom version that doesn't use our version information.
Members
MountPoint
Description
The details for a volume mount point that's used in a container definition.
Members
- containerPath
-
- Type: string
The path on the container to mount the host volume at.
- readOnly
-
- Type: boolean
If this value is
true
, the container has read-only access to the volume. If this value isfalse
, then the container can write to the volume. The default value isfalse
. - sourceVolume
-
- Type: string
The name of the volume to mount. Must be a volume name referenced in the
name
parameter of task definitionvolume
.
NamespaceNotFoundException
Description
The specified namespace wasn't found.
Members
NetworkBinding
Description
Details on the network bindings between a container and its host container instance. After a task reaches the RUNNING
status, manual and automatic host and container port assignments are visible in the networkBindings
section of DescribeTasks API responses.
Members
- bindIP
-
- Type: string
The IP address that the container is bound to on the container instance.
- containerPort
-
- Type: int
The port number on the container that's used with the network binding.
- containerPortRange
-
- Type: string
The port number range on the container that's bound to the dynamically mapped host port range.
The following rules apply when you specify a
containerPortRange
:-
You must use either the
bridge
network mode or theawsvpc
network mode. -
This parameter is available for both the EC2 and Fargate launch types.
-
This parameter is available for both the Linux and Windows operating systems.
-
The container instance must have at least version 1.67.0 of the container agent and at least version 1.67.0-1 of the
ecs-init
package -
You can specify a maximum of 100 port ranges per container.
-
You do not specify a
hostPortRange
. The value of thehostPortRange
is set as follows:-
For containers in a task with the
awsvpc
network mode, thehostPortRange
is set to the same value as thecontainerPortRange
. This is a static mapping strategy. -
For containers in a task with the
bridge
network mode, the Amazon ECS agent finds open host ports from the default ephemeral range and passes it to docker to bind them to the container ports.
-
-
The
containerPortRange
valid values are between 1 and 65535. -
A port can only be included in one port mapping per container.
-
You cannot specify overlapping port ranges.
-
The first port in the range must be less than last port in the range.
-
Docker recommends that you turn off the docker-proxy in the Docker daemon config file when you have a large number of ports.
For more information, see Issue #11185 on the Github website.
For information about how to turn off the docker-proxy in the Docker daemon config file, see Docker daemon in the Amazon ECS Developer Guide.
You can call
DescribeTasks
to view thehostPortRange
which are the host ports that are bound to the container ports. - hostPort
-
- Type: int
The port number on the host that's used with the network binding.
- hostPortRange
-
- Type: string
The port number range on the host that's used with the network binding. This is assigned is assigned by Docker and delivered by the Amazon ECS agent.
- protocol
-
- Type: string
The protocol used for the network binding.
NetworkConfiguration
Description
The network configuration for a task or service.
Members
- awsvpcConfiguration
-
- Type: AwsVpcConfiguration structure
The VPC subnets and security groups that are associated with a task.
All specified subnets and security groups must be from the same VPC.
NetworkInterface
Description
An object representing the elastic network interface for tasks that use the awsvpc
network mode.
Members
- attachmentId
-
- Type: string
The attachment ID for the network interface.
- ipv6Address
-
- Type: string
The private IPv6 address for the network interface.
- privateIpv4Address
-
- Type: string
The private IPv4 address for the network interface.
NoUpdateAvailableException
Description
There's no update available for this Amazon ECS container agent. This might be because the agent is already running the latest version or because it's so old that there's no update path to the current version.
Members
PlacementConstraint
Description
An object representing a constraint on task placement. For more information, see Task placement constraints in the Amazon Elastic Container Service Developer Guide.
If you're using the Fargate launch type, task placement constraints aren't supported.
Members
- expression
-
- Type: string
A cluster query language expression to apply to the constraint. The expression can have a maximum length of 2000 characters. You can't specify an expression if the constraint type is
distinctInstance
. For more information, see Cluster query language in the Amazon Elastic Container Service Developer Guide. - type
-
- Type: string
The type of constraint. Use
distinctInstance
to ensure that each task in a particular group is running on a different container instance. UsememberOf
to restrict the selection to a group of valid candidates.
PlacementStrategy
Description
The task placement strategy for a task or service. For more information, see Task placement strategies in the Amazon Elastic Container Service Developer Guide.
Members
- field
-
- Type: string
The field to apply the placement strategy against. For the
spread
placement strategy, valid values areinstanceId
(orhost
, which has the same effect), or any platform or custom attribute that's applied to a container instance, such asattribute:ecs.availability-zone
. For thebinpack
placement strategy, valid values arecpu
andmemory
. For therandom
placement strategy, this field is not used. - type
-
- Type: string
The type of placement strategy. The
random
placement strategy randomly places tasks on available candidates. Thespread
placement strategy spreads placement across available candidates evenly based on thefield
parameter. Thebinpack
strategy places tasks on available candidates that have the least available amount of the resource that's specified with thefield
parameter. For example, if you binpack on memory, a task is placed on the instance with the least amount of remaining memory but still enough to run the task.
PlatformDevice
Description
The devices that are available on the container instance. The only supported device type is a GPU.
Members
- id
-
- Required: Yes
- Type: string
The ID for the GPUs on the container instance. The available GPU IDs can also be obtained on the container instance in the
/var/lib/ecs/gpu/nvidia_gpu_info.json
file. - type
-
- Required: Yes
- Type: string
The type of device that's available on the container instance. The only supported value is
GPU
.
PlatformTaskDefinitionIncompatibilityException
Description
The specified platform version doesn't satisfy the required capabilities of the task definition.
Members
PlatformUnknownException
Description
The specified platform version doesn't exist.
Members
PortMapping
Description
Port mappings expose your container's network ports to the outside world. this allows clients to access your application. It's also used for inter-container communication within the same task.
For task definitions (both the Fargate and EC2 launch type) that use the awsvpc
network mode, only specify the containerPort
. The hostPort
is always ignored, and the container port is automatically mapped to a random high-numbered port on the host.
Most fields of this parameter (containerPort
, hostPort
, protocol
) maps to PortBindings
in the docker container create command and the --publish
option to docker run
. If the network mode of a task definition is set to host
, host ports must either be undefined or match the container port in the port mapping.
You can't expose the same container port for multiple protocols. If you attempt this, an error is returned.
After a task reaches the RUNNING
status, manual and automatic host and container port assignments are visible in the networkBindings
section of DescribeTasks API responses.
Members
- appProtocol
-
- Type: string
The application protocol that's used for the port mapping. This parameter only applies to Service Connect. We recommend that you set this parameter to be consistent with the protocol that your application uses. If you set this parameter, Amazon ECS adds protocol-specific connection handling to the Service Connect proxy. If you set this parameter, Amazon ECS adds protocol-specific telemetry in the Amazon ECS console and CloudWatch.
If you don't set a value for this parameter, then TCP is used. However, Amazon ECS doesn't add protocol-specific telemetry for TCP.
appProtocol
is immutable in a Service Connect service. Updating this field requires a service deletion and redeployment.Tasks that run in a namespace can use short names to connect to services in the namespace. Tasks can connect to services across all of the clusters in the namespace. Tasks connect through a managed proxy container that collects logs and metrics for increased visibility. Only the tasks that Amazon ECS services create are supported with Service Connect. For more information, see Service Connect in the Amazon Elastic Container Service Developer Guide.
- containerPort
-
- Type: int
The port number on the container that's bound to the user-specified or automatically assigned host port.
For tasks that use the Fargate launch type or EC2 tasks that use the
awsvpc
network mode, you usecontainerPort
to specify the exposed ports.For Windows containers on Fargate, you can't use port 3150 for the
containerPort
. This is because it's reserved.Suppose that you're using containers in a task with the EC2 launch type and you specify a container port and not a host port. Then, your container automatically receives a host port in the ephemeral port range. For more information, see
hostPort
. Port mappings that are automatically assigned in this way don't count toward the 100 reserved ports quota of a container instance. - containerPortRange
-
- Type: string
The port number range on the container that's bound to the dynamically mapped host port range.
The following rules apply when you specify a
containerPortRange
:-
You must use either the
bridge
network mode or theawsvpc
network mode. -
This parameter is available for both the EC2 and Fargate launch types.
-
This parameter is available for both the Linux and Windows operating systems.
-
The container instance must have at least version 1.67.0 of the container agent and at least version 1.67.0-1 of the
ecs-init
package -
You can specify a maximum of 100 port ranges per container.
-
You do not specify a
hostPortRange
. The value of thehostPortRange
is set as follows:-
For containers in a task with the
awsvpc
network mode, thehostPortRange
is set to the same value as thecontainerPortRange
. This is a static mapping strategy. -
For containers in a task with the
bridge
network mode, the Amazon ECS agent finds open host ports from the default ephemeral range and passes it to docker to bind them to the container ports.
-
-
The
containerPortRange
valid values are between 1 and 65535. -
A port can only be included in one port mapping per container.
-
You cannot specify overlapping port ranges.
-
The first port in the range must be less than last port in the range.
-
Docker recommends that you turn off the docker-proxy in the Docker daemon config file when you have a large number of ports.
For more information, see Issue #11185 on the Github website.
For information about how to turn off the docker-proxy in the Docker daemon config file, see Docker daemon in the Amazon ECS Developer Guide.
You can call
DescribeTasks
to view thehostPortRange
which are the host ports that are bound to the container ports. - hostPort
-
- Type: int
The port number on the container instance to reserve for your container.
If you specify a
containerPortRange
, leave this field empty and the value of thehostPort
is set as follows:-
For containers in a task with the
awsvpc
network mode, thehostPort
is set to the same value as thecontainerPort
. This is a static mapping strategy. -
For containers in a task with the
bridge
network mode, the Amazon ECS agent finds open ports on the host and automatically binds them to the container ports. This is a dynamic mapping strategy.
If you use containers in a task with the
awsvpc
orhost
network mode, thehostPort
can either be left blank or set to the same value as thecontainerPort
.If you use containers in a task with the
bridge
network mode, you can specify a non-reserved host port for your container port mapping, or you can omit thehostPort
(or set it to0
) while specifying acontainerPort
and your container automatically receives a port in the ephemeral port range for your container instance operating system and Docker version.The default ephemeral port range for Docker version 1.6.0 and later is listed on the instance under
/proc/sys/net/ipv4/ip_local_port_range
. If this kernel parameter is unavailable, the default ephemeral port range from 49153 through 65535 (Linux) or 49152 through 65535 (Windows) is used. Do not attempt to specify a host port in the ephemeral port range as these are reserved for automatic assignment. In general, ports below 32768 are outside of the ephemeral port range.The default reserved ports are 22 for SSH, the Docker ports 2375 and 2376, and the Amazon ECS container agent ports 51678-51680. Any host port that was previously specified in a running task is also reserved while the task is running. That is, after a task stops, the host port is released. The current reserved ports are displayed in the
remainingResources
of DescribeContainerInstances output. A container instance can have up to 100 reserved ports at a time. This number includes the default reserved ports. Automatically assigned ports aren't included in the 100 reserved ports quota. - name
-
- Type: string
The name that's used for the port mapping. This parameter only applies to Service Connect. This parameter is the name that you use in the
serviceConnectConfiguration
of a service. The name can include up to 64 characters. The characters can include lowercase letters, numbers, underscores (_), and hyphens (-). The name can't start with a hyphen.For more information, see Service Connect in the Amazon Elastic Container Service Developer Guide.
- protocol
-
- Type: string
The protocol used for the port mapping. Valid values are
tcp
andudp
. The default istcp
.protocol
is immutable in a Service Connect service. Updating this field requires a service deletion and redeployment.
ProtectedTask
Description
An object representing the protection status details for a task. You can set the protection status with the UpdateTaskProtection API and get the status of tasks with the GetTaskProtection API.
Members
- expirationDate
-
- Type: timestamp (string|DateTime or anything parsable by strtotime)
The epoch time when protection for the task will expire.
- protectionEnabled
-
- Type: boolean
The protection status of the task. If scale-in protection is on for a task, the value is
true
. Otherwise, it isfalse
. - taskArn
-
- Type: string
The task ARN.
ProxyConfiguration
Description
The configuration details for the App Mesh proxy.
For tasks that use the EC2 launch type, the container instances require at least version 1.26.0 of the container agent and at least version 1.26.0-1 of the ecs-init
package to use a proxy configuration. If your container instances are launched from the Amazon ECS optimized AMI version 20190301
or later, then they contain the required versions of the container agent and ecs-init
. For more information, see Amazon ECS-optimized Linux AMI
Members
- containerName
-
- Required: Yes
- Type: string
The name of the container that will serve as the App Mesh proxy.
- properties
-
- Type: Array of KeyValuePair structures
The set of network configuration parameters to provide the Container Network Interface (CNI) plugin, specified as key-value pairs.
-
IgnoredUID
- (Required) The user ID (UID) of the proxy container as defined by theuser
parameter in a container definition. This is used to ensure the proxy ignores its own traffic. IfIgnoredGID
is specified, this field can be empty. -
IgnoredGID
- (Required) The group ID (GID) of the proxy container as defined by theuser
parameter in a container definition. This is used to ensure the proxy ignores its own traffic. IfIgnoredUID
is specified, this field can be empty. -
AppPorts
- (Required) The list of ports that the application uses. Network traffic to these ports is forwarded to theProxyIngressPort
andProxyEgressPort
. -
ProxyIngressPort
- (Required) Specifies the port that incoming traffic to theAppPorts
is directed to. -
ProxyEgressPort
- (Required) Specifies the port that outgoing traffic from theAppPorts
is directed to. -
EgressIgnoredPorts
- (Required) The egress traffic going to the specified ports is ignored and not redirected to theProxyEgressPort
. It can be an empty list. -
EgressIgnoredIPs
- (Required) The egress traffic going to the specified IP addresses is ignored and not redirected to theProxyEgressPort
. It can be an empty list.
- type
-
- Type: string
The proxy type. The only supported value is
APPMESH
.
RepositoryCredentials
Description
The repository credentials for private registry authentication.
Members
- credentialsParameter
-
- Required: Yes
- Type: string
The Amazon Resource Name (ARN) of the secret containing the private repository credentials.
When you use the Amazon ECS API, CLI, or Amazon Web Services SDK, if the secret exists in the same Region as the task that you're launching then you can use either the full ARN or the name of the secret. When you use the Amazon Web Services Management Console, you must specify the full ARN of the secret.
Resource
Description
Describes the resources available for a container instance.
Members
- doubleValue
-
- Type: double
When the
doubleValue
type is set, the value of the resource must be a double precision floating-point type. - integerValue
-
- Type: int
When the
integerValue
type is set, the value of the resource must be an integer. - longValue
-
- Type: long (int|float)
When the
longValue
type is set, the value of the resource must be an extended precision floating-point type. - name
-
- Type: string
The name of the resource, such as
CPU
,MEMORY
,PORTS
,PORTS_UDP
, or a user-defined resource. - stringSetValue
-
- Type: Array of strings
When the
stringSetValue
type is set, the value of the resource must be a string type. - type
-
- Type: string
The type of the resource. Valid values:
INTEGER
,DOUBLE
,LONG
, orSTRINGSET
.
ResourceInUseException
Description
The specified resource is in-use and can't be removed.
Members
ResourceNotFoundException
Description
The specified resource wasn't found.
Members
ResourceRequirement
Description
The type and amount of a resource to assign to a container. The supported resource types are GPUs and Elastic Inference accelerators. For more information, see Working with GPUs on Amazon ECS or Working with Amazon Elastic Inference on Amazon ECS in the Amazon Elastic Container Service Developer Guide
Members
- type
-
- Required: Yes
- Type: string
The type of resource to assign to a container.
- value
-
- Required: Yes
- Type: string
The value for the specified resource type.
When the type is
GPU
, the value is the number of physicalGPUs
the Amazon ECS container agent reserves for the container. The number of GPUs that's reserved for all containers in a task can't exceed the number of available GPUs on the container instance that the task is launched on.When the type is
InferenceAccelerator
, thevalue
matches thedeviceName
for an InferenceAccelerator specified in a task definition.
Rollback
Description
Information about the service deployment rollback.
Members
- reason
-
- Type: string
The reason the rollback happened. For example, the circuit breaker initiated the rollback operation.
- serviceRevisionArn
-
- Type: string
The ARN of the service revision deployed as part of the rollback.
When the type is
GPU
, the value is the number of physicalGPUs
the Amazon ECS container agent reserves for the container. The number of GPUs that's reserved for all containers in a task can't exceed the number of available GPUs on the container instance that the task is launched on.When the type is
InferenceAccelerator
, thevalue
matches thedeviceName
for an InferenceAccelerator specified in a task definition. - startedAt
-
- Type: timestamp (string|DateTime or anything parsable by strtotime)
Time time that the rollback started. The format is yyyy-MM-dd HH:mm:ss.SSSSSS.
RuntimePlatform
Description
Information about the platform for the Amazon ECS service or task.
For more information about RuntimePlatform
, see RuntimePlatform in the Amazon Elastic Container Service Developer Guide.
Members
- cpuArchitecture
-
- Type: string
The CPU architecture.
You can run your Linux tasks on an ARM-based platform by setting the value to
ARM64
. This option is available for tasks that run on Linux Amazon EC2 instance or Linux containers on Fargate.The default is
X86_64
. - operatingSystemFamily
-
- Type: string
The operating system.
The default is
Linux
.
Scale
Description
A floating-point percentage of the desired number of tasks to place and keep running in the task set.
Members
- unit
-
- Type: string
The unit of measure for the scale value.
- value
-
- Type: double
The value, specified as a percent total of a service's
desiredCount
, to scale the task set. Accepted values are numbers between 0 and 100.
Secret
Description
An object representing the secret to expose to your container. Secrets can be exposed to a container in the following ways:
-
To inject sensitive data into your containers as environment variables, use the
secrets
container definition parameter. -
To reference sensitive information in the log configuration of a container, use the
secretOptions
container definition parameter.
For more information, see Specifying sensitive data in the Amazon Elastic Container Service Developer Guide.
Members
- name
-
- Required: Yes
- Type: string
The name of the secret.
- valueFrom
-
- Required: Yes
- Type: string
The secret to expose to the container. The supported values are either the full ARN of the Secrets Manager secret or the full ARN of the parameter in the SSM Parameter Store.
For information about the require Identity and Access Management permissions, see Required IAM permissions for Amazon ECS secrets (for Secrets Manager) or Required IAM permissions for Amazon ECS secrets (for Systems Manager Parameter store) in the Amazon Elastic Container Service Developer Guide.
If the SSM Parameter Store parameter exists in the same Region as the task you're launching, then you can use either the full ARN or name of the parameter. If the parameter exists in a different Region, then the full ARN must be specified.
ServerException
Description
These errors are usually caused by a server issue.
Members
- message
-
- Type: string
Message that describes the cause of the exception.
Service
Description
Details on a service within a cluster.
Members
- capacityProviderStrategy
-
- Type: Array of CapacityProviderStrategyItem structures
The capacity provider strategy the service uses. When using
DescribeServices
, this field is omitted if the service was created using a launch type. - clusterArn
-
- Type: string
The Amazon Resource Name (ARN) of the cluster that hosts the service.
- createdAt
-
- Type: timestamp (string|DateTime or anything parsable by strtotime)
The Unix timestamp for the time when the service was created.
- createdBy
-
- Type: string
The principal that created the service.
- deploymentConfiguration
-
- Type: DeploymentConfiguration structure
Optional deployment parameters that control how many tasks run during the deployment and the ordering of stopping and starting tasks.
- deploymentController
-
- Type: DeploymentController structure
The deployment controller type the service is using.
- deployments
-
- Type: Array of Deployment structures
The current state of deployments for the service.
- desiredCount
-
- Type: int
The desired number of instantiations of the task definition to keep running on the service. This value is specified when the service is created with CreateService , and it can be modified with UpdateService.
- enableECSManagedTags
-
- Type: boolean
Determines whether to use Amazon ECS managed tags for the tasks in the service. For more information, see Tagging Your Amazon ECS Resources in the Amazon Elastic Container Service Developer Guide.
- enableExecuteCommand
-
- Type: boolean
Determines whether the execute command functionality is turned on for the service. If
true
, the execute command functionality is turned on for all containers in tasks as part of the service. - events
-
- Type: Array of ServiceEvent structures
The event stream for your service. A maximum of 100 of the latest events are displayed.
- healthCheckGracePeriodSeconds
-
- Type: int
The period of time, in seconds, that the Amazon ECS service scheduler ignores unhealthy Elastic Load Balancing target health checks after a task has first started.
- launchType
-
- Type: string
The launch type the service is using. When using the DescribeServices API, this field is omitted if the service was created using a capacity provider strategy.
- loadBalancers
-
- Type: Array of LoadBalancer structures
A list of Elastic Load Balancing load balancer objects. It contains the load balancer name, the container name, and the container port to access from the load balancer. The container name is as it appears in a container definition.
- networkConfiguration
-
- Type: NetworkConfiguration structure
The VPC subnet and security group configuration for tasks that receive their own elastic network interface by using the
awsvpc
networking mode. - pendingCount
-
- Type: int
The number of tasks in the cluster that are in the
PENDING
state. - placementConstraints
-
- Type: Array of PlacementConstraint structures
The placement constraints for the tasks in the service.
- placementStrategy
-
- Type: Array of PlacementStrategy structures
The placement strategy that determines how tasks for the service are placed.
- platformFamily
-
- Type: string
The operating system that your tasks in the service run on. A platform family is specified only for tasks using the Fargate launch type.
All tasks that run as part of this service must use the same
platformFamily
value as the service (for example,LINUX
). - platformVersion
-
- Type: string
The platform version to run your service on. A platform version is only specified for tasks that are hosted on Fargate. If one isn't specified, the
LATEST
platform version is used. For more information, see Fargate Platform Versions in the Amazon Elastic Container Service Developer Guide. - propagateTags
-
- Type: string
Determines whether to propagate the tags from the task definition or the service to the task. If no value is specified, the tags aren't propagated.
- roleArn
-
- Type: string
The ARN of the IAM role that's associated with the service. It allows the Amazon ECS container agent to register container instances with an Elastic Load Balancing load balancer.
- runningCount
-
- Type: int
The number of tasks in the cluster that are in the
RUNNING
state. - schedulingStrategy
-
- Type: string
The scheduling strategy to use for the service. For more information, see Services.
There are two service scheduler strategies available.
-
REPLICA
-The replica scheduling strategy places and maintains the desired number of tasks across your cluster. By default, the service scheduler spreads tasks across Availability Zones. You can use task placement strategies and constraints to customize task placement decisions. -
DAEMON
-The daemon scheduling strategy deploys exactly one task on each active container instance. This task meets all of the task placement constraints that you specify in your cluster. The service scheduler also evaluates the task placement constraints for running tasks. It stop tasks that don't meet the placement constraints.Fargate tasks don't support the
DAEMON
scheduling strategy.
- serviceArn
-
- Type: string
The ARN that identifies the service. For more information about the ARN format, see Amazon Resource Name (ARN) in the Amazon ECS Developer Guide.
- serviceName
-
- Type: string
The name of your service. Up to 255 letters (uppercase and lowercase), numbers, underscores, and hyphens are allowed. Service names must be unique within a cluster. However, you can have similarly named services in multiple clusters within a Region or across multiple Regions.
- serviceRegistries
-
- Type: Array of ServiceRegistry structures
The details for the service discovery registries to assign to this service. For more information, see Service Discovery.
- status
-
- Type: string
The status of the service. The valid values are
ACTIVE
,DRAINING
, orINACTIVE
. - tags
-
- Type: Array of Tag structures
The metadata that you apply to the service to help you categorize and organize them. Each tag consists of a key and an optional value. You define both the key and value.
The following basic restrictions apply to tags:
-
Maximum number of tags per resource - 50
-
For each resource, each tag key must be unique, and each tag key can have only one value.
-
Maximum key length - 128 Unicode characters in UTF-8
-
Maximum value length - 256 Unicode characters in UTF-8
-
If your tagging schema is used across multiple services and resources, remember that other services may have restrictions on allowed characters. Generally allowed characters are: letters, numbers, and spaces representable in UTF-8, and the following characters: + - = . _ : / @.
-
Tag keys and values are case-sensitive.
-
Do not use
aws:
,AWS:
, or any upper or lowercase combination of such as a prefix for either keys or values as it is reserved for Amazon Web Services use. You cannot edit or delete tag keys or values with this prefix. Tags with this prefix do not count against your tags per resource limit.
- taskDefinition
-
- Type: string
The task definition to use for tasks in the service. This value is specified when the service is created with CreateService, and it can be modified with UpdateService.
- taskSets
-
- Type: Array of TaskSet structures
Information about a set of Amazon ECS tasks in either an CodeDeploy or an
EXTERNAL
deployment. An Amazon ECS task set includes details such as the desired number of tasks, how many tasks are running, and whether the task set serves production traffic.
ServiceConnectClientAlias
Description
Each alias ("endpoint") is a fully-qualified name and port number that other tasks ("clients") can use to connect to this service.
Each name and port mapping must be unique within the namespace.
Tasks that run in a namespace can use short names to connect to services in the namespace. Tasks can connect to services across all of the clusters in the namespace. Tasks connect through a managed proxy container that collects logs and metrics for increased visibility. Only the tasks that Amazon ECS services create are supported with Service Connect. For more information, see Service Connect in the Amazon Elastic Container Service Developer Guide.
Members
- dnsName
-
- Type: string
The
dnsName
is the name that you use in the applications of client tasks to connect to this service. The name must be a valid DNS name but doesn't need to be fully-qualified. The name can include up to 127 characters. The name can include lowercase letters, numbers, underscores (_), hyphens (-), and periods (.). The name can't start with a hyphen.If this parameter isn't specified, the default value of
discoveryName.namespace
is used. If thediscoveryName
isn't specified, the port mapping name from the task definition is used inportName.namespace
.To avoid changing your applications in client Amazon ECS services, set this to the same name that the client application uses by default. For example, a few common names are
database
,db
, or the lowercase name of a database, such asmysql
orredis
. For more information, see Service Connect in the Amazon Elastic Container Service Developer Guide. - port
-
- Required: Yes
- Type: int
The listening port number for the Service Connect proxy. This port is available inside of all of the tasks within the same namespace.
To avoid changing your applications in client Amazon ECS services, set this to the same port that the client application uses by default. For more information, see Service Connect in the Amazon Elastic Container Service Developer Guide.
ServiceConnectConfiguration
Description
The Service Connect configuration of your Amazon ECS service. The configuration for this service to discover and connect to services, and be discovered by, and connected from, other services within a namespace.
Tasks that run in a namespace can use short names to connect to services in the namespace. Tasks can connect to services across all of the clusters in the namespace. Tasks connect through a managed proxy container that collects logs and metrics for increased visibility. Only the tasks that Amazon ECS services create are supported with Service Connect. For more information, see Service Connect in the Amazon Elastic Container Service Developer Guide.
Members
- enabled
-
- Required: Yes
- Type: boolean
Specifies whether to use Service Connect with this service.
- logConfiguration
-
- Type: LogConfiguration structure
The log configuration for the container. This parameter maps to
LogConfig
in the docker container create command and the--log-driver
option to docker run.By default, containers use the same logging driver that the Docker daemon uses. However, the container might use a different logging driver than the Docker daemon by specifying a log driver configuration in the container definition.
Understand the following when specifying a log configuration for your containers.
-
Amazon ECS currently supports a subset of the logging drivers available to the Docker daemon. Additional log drivers may be available in future releases of the Amazon ECS container agent.
For tasks on Fargate, the supported log drivers are
awslogs
,splunk
, andawsfirelens
.For tasks hosted on Amazon EC2 instances, the supported log drivers are
awslogs
,fluentd
,gelf
,json-file
,journald
,syslog
,splunk
, andawsfirelens
. -
This parameter requires version 1.18 of the Docker Remote API or greater on your container instance.
-
For tasks that are hosted on Amazon EC2 instances, the Amazon ECS container agent must register the available logging drivers with the
ECS_AVAILABLE_LOGGING_DRIVERS
environment variable before containers placed on that instance can use these log configuration options. For more information, see Amazon ECS container agent configuration in the Amazon Elastic Container Service Developer Guide. -
For tasks that are on Fargate, because you don't have access to the underlying infrastructure your tasks are hosted on, any additional software needed must be installed outside of the task. For example, the Fluentd output aggregators or a remote host running Logstash to send Gelf logs to.
- namespace
-
- Type: string
The namespace name or full Amazon Resource Name (ARN) of the Cloud Map namespace for use with Service Connect. The namespace must be in the same Amazon Web Services Region as the Amazon ECS service and cluster. The type of namespace doesn't affect Service Connect. For more information about Cloud Map, see Working with Services in the Cloud Map Developer Guide.
- services
-
- Type: Array of ServiceConnectService structures
The list of Service Connect service objects. These are names and aliases (also known as endpoints) that are used by other Amazon ECS services to connect to this service.
This field is not required for a "client" Amazon ECS service that's a member of a namespace only to connect to other services within the namespace. An example of this would be a frontend application that accepts incoming requests from either a load balancer that's attached to the service or by other means.
An object selects a port from the task definition, assigns a name for the Cloud Map service, and a list of aliases (endpoints) and ports for client applications to refer to this service.
ServiceConnectService
Description
The Service Connect service object configuration. For more information, see Service Connect in the Amazon Elastic Container Service Developer Guide.
Members
- clientAliases
-
- Type: Array of ServiceConnectClientAlias structures
The list of client aliases for this Service Connect service. You use these to assign names that can be used by client applications. The maximum number of client aliases that you can have in this list is 1.
Each alias ("endpoint") is a fully-qualified name and port number that other Amazon ECS tasks ("clients") can use to connect to this service.
Each name and port mapping must be unique within the namespace.
For each
ServiceConnectService
, you must provide at least oneclientAlias
with oneport
. - discoveryName
-
- Type: string
The
discoveryName
is the name of the new Cloud Map service that Amazon ECS creates for this Amazon ECS service. This must be unique within the Cloud Map namespace. The name can contain up to 64 characters. The name can include lowercase letters, numbers, underscores (_), and hyphens (-). The name can't start with a hyphen.If the
discoveryName
isn't specified, the port mapping name from the task definition is used inportName.namespace
. - ingressPortOverride
-
- Type: int
The port number for the Service Connect proxy to listen on.
Use the value of this field to bypass the proxy for traffic on the port number specified in the named
portMapping
in the task definition of this application, and then use it in your VPC security groups to allow traffic into the proxy for this Amazon ECS service.In
awsvpc
mode and Fargate, the default value is the container port number. The container port number is in theportMapping
in the task definition. In bridge mode, the default value is the ephemeral port of the Service Connect proxy. - portName
-
- Required: Yes
- Type: string
The
portName
must match the name of one of theportMappings
from all the containers in the task definition of this Amazon ECS service. - timeout
-
- Type: TimeoutConfiguration structure
A reference to an object that represents the configured timeouts for Service Connect.
- tls
-
- Type: ServiceConnectTlsConfiguration structure
A reference to an object that represents a Transport Layer Security (TLS) configuration.
ServiceConnectServiceResource
Description
The Service Connect resource. Each configuration maps a discovery name to a Cloud Map service name. The data is stored in Cloud Map as part of the Service Connect configuration for each discovery name of this Amazon ECS service.
A task can resolve the dnsName
for each of the clientAliases
of a service. However a task can't resolve the discovery names. If you want to connect to a service, refer to the ServiceConnectConfiguration
of that service for the list of clientAliases
that you can use.
Members
- discoveryArn
-
- Type: string
The Amazon Resource Name (ARN) for the namespace in Cloud Map that matches the discovery name for this Service Connect resource. You can use this ARN in other integrations with Cloud Map. However, Service Connect can't ensure connectivity outside of Amazon ECS.
- discoveryName
-
- Type: string
The discovery name of this Service Connect resource.
The
discoveryName
is the name of the new Cloud Map service that Amazon ECS creates for this Amazon ECS service. This must be unique within the Cloud Map namespace. The name can contain up to 64 characters. The name can include lowercase letters, numbers, underscores (_), and hyphens (-). The name can't start with a hyphen.If the
discoveryName
isn't specified, the port mapping name from the task definition is used inportName.namespace
.
ServiceConnectTlsCertificateAuthority
Description
The certificate root authority that secures your service.
Members
- awsPcaAuthorityArn
-
- Type: string
The ARN of the Amazon Web Services Private Certificate Authority certificate.
ServiceConnectTlsConfiguration
Description
The key that encrypts and decrypts your resources for Service Connect TLS.
Members
- issuerCertificateAuthority
-
- Required: Yes
- Type: ServiceConnectTlsCertificateAuthority structure
The signer certificate authority.
- kmsKey
-
- Type: string
The Amazon Web Services Key Management Service key.
- roleArn
-
- Type: string
The Amazon Resource Name (ARN) of the IAM role that's associated with the Service Connect TLS.
ServiceDeployment
Description
Information about the service deployment.
Service deployments provide a comprehensive view of your deployments. For information about service deployments, see View service history using Amazon ECS service deployments in the Amazon Elastic Container Service Developer Guide .
Members
- alarms
-
- Type: ServiceDeploymentAlarms structure
The CloudWatch alarms that determine when a service deployment fails.
- clusterArn
-
- Type: string
The ARN of the cluster that hosts the service.
- createdAt
-
- Type: timestamp (string|DateTime or anything parsable by strtotime)
The time the service deployment was created. The format is yyyy-MM-dd HH:mm:ss.SSSSSS.
- deploymentCircuitBreaker
-
- Type: ServiceDeploymentCircuitBreaker structure
The circuit breaker configuration that determines a service deployment failed.
- deploymentConfiguration
-
- Type: DeploymentConfiguration structure
Optional deployment parameters that control how many tasks run during the deployment and the failure detection methods.
- finishedAt
-
- Type: timestamp (string|DateTime or anything parsable by strtotime)
The time the service deployment finished. The format is yyyy-MM-dd HH:mm:ss.SSSSSS.
- rollback
-
- Type: Rollback structure
The rollback options the service deployment uses when the deployment fails.
- serviceArn
-
- Type: string
The ARN of the service for this service deployment.
- serviceDeploymentArn
-
- Type: string
The ARN of the service deployment.
- sourceServiceRevisions
-
- Type: Array of ServiceRevisionSummary structures
The currently deployed workload configuration.
- startedAt
-
- Type: timestamp (string|DateTime or anything parsable by strtotime)
The time the service deployment statred. The format is yyyy-MM-dd HH:mm:ss.SSSSSS.
- status
-
- Type: string
The service deployment state.
- statusReason
-
- Type: string
Information about why the service deployment is in the current status. For example, the circuit breaker detected a failure.
- stoppedAt
-
- Type: timestamp (string|DateTime or anything parsable by strtotime)
The time the service deployment stopped. The format is yyyy-MM-dd HH:mm:ss.SSSSSS.
The service deployment stops when any of the following actions happen:
-
A user manually stops the deployment
-
The rollback option is not in use for the failure detection mechanism (the circuit breaker or alarm-based) and the service fails.
- targetServiceRevision
-
- Type: ServiceRevisionSummary structure
The workload configuration being deployed.
- updatedAt
-
- Type: timestamp (string|DateTime or anything parsable by strtotime)
The time that the service deployment was last updated. The format is yyyy-MM-dd HH:mm:ss.SSSSSS.
ServiceDeploymentAlarms
Description
The CloudWatch alarms used to determine a service deployment failed.
Amazon ECS considers the service deployment as failed when any of the alarms move to the ALARM
state. For more information, see How CloudWatch alarms detect Amazon ECS deployment failures in the Amazon ECS Developer Guide.
Members
- alarmNames
-
- Type: Array of strings
The name of the CloudWatch alarms that determine when a service deployment failed. A "," separates the alarms.
- status
-
- Type: string
The status of the alarms check. Amazon ECS is not using alarms for service deployment failures when the status is
DISABLED
. - triggeredAlarmNames
-
- Type: Array of strings
One or more CloudWatch alarm names that have been triggered during the service deployment. A "," separates the alarm names.
ServiceDeploymentBrief
Description
The service deployment properties that are retured when you call ListServiceDeployments
.
This provides a high-level overview of the service deployment.
Members
- clusterArn
-
- Type: string
The ARN of the cluster that hosts the service.
- createdAt
-
- Type: timestamp (string|DateTime or anything parsable by strtotime)
The time that the service deployment was created. The format is yyyy-MM-dd HH:mm:ss.SSSSSS.
- finishedAt
-
- Type: timestamp (string|DateTime or anything parsable by strtotime)
The time that the service deployment completed. The format is yyyy-MM-dd HH:mm:ss.SSSSSS.
- serviceArn
-
- Type: string
The ARN of the service for this service deployment.
- serviceDeploymentArn
-
- Type: string
The ARN of the service deployment.
- startedAt
-
- Type: timestamp (string|DateTime or anything parsable by strtotime)
The time that the service deployment statred. The format is yyyy-MM-dd HH:mm:ss.SSSSSS.
- status
-
- Type: string
The status of the service deployment
- statusReason
-
- Type: string
Information about why the service deployment is in the current status. For example, the circuit breaker detected a deployment failure.
- targetServiceRevisionArn
-
- Type: string
The ARN of the service revision being deplyed.
ServiceDeploymentCircuitBreaker
Description
Information about the circuit breaker used to determine when a service deployment has failed.
The deployment circuit breaker is the rolling update mechanism that determines if the tasks reach a steady state. The deployment circuit breaker has an option that will automatically roll back a failed deployment to the last cpompleted service revision. For more information, see How the Amazon ECS deployment circuit breaker detects failures in the Amazon ECS Developer Guide.
Members
- failureCount
-
- Type: int
The number of times the circuit breaker detected a service deploymeny failure.
- status
-
- Type: string
The circuit breaker status. Amazon ECS is not using the circuit breaker for service deployment failures when the status is
DISABLED
. - threshold
-
- Type: int
The threshhold which determines that the service deployment failed.
The deployment circuit breaker calculates the threshold value, and then uses the value to determine when to move the deployment to a FAILED state. The deployment circuit breaker has a minimum threshold of 3 and a maximum threshold of 200. and uses the values in the following formula to determine the deployment failure.
0.5 * desired task count
ServiceEvent
Description
The details for an event that's associated with a service.
Members
- createdAt
-
- Type: timestamp (string|DateTime or anything parsable by strtotime)
The Unix timestamp for the time when the event was triggered.
- id
-
- Type: string
The ID string for the event.
- message
-
- Type: string
The event message.
ServiceManagedEBSVolumeConfiguration
Description
The configuration for the Amazon EBS volume that Amazon ECS creates and manages on your behalf. These settings are used to create each Amazon EBS volume, with one volume created for each task in the service. For information about the supported launch types and operating systems, see Supported operating systems and launch types in the Amazon Elastic Container Service Developer Guide.
Many of these parameters map 1:1 with the Amazon EBS CreateVolume
API request parameters.
Members
- encrypted
-
- Type: boolean
Indicates whether the volume should be encrypted. If no value is specified, encryption is turned on by default. This parameter maps 1:1 with the
Encrypted
parameter of the CreateVolume API in the Amazon EC2 API Reference. - filesystemType
-
- Type: string
The filesystem type for the volume. For volumes created from a snapshot, you must specify the same filesystem type that the volume was using when the snapshot was created. If there is a filesystem type mismatch, the task will fail to start.
The available Linux filesystem types are
ext3
,ext4
, andxfs
. If no value is specified, thexfs
filesystem type is used by default.The available Windows filesystem types are
NTFS
. - iops
-
- Type: int
The number of I/O operations per second (IOPS). For
gp3
,io1
, andio2
volumes, this represents the number of IOPS that are provisioned for the volume. Forgp2
volumes, this represents the baseline performance of the volume and the rate at which the volume accumulates I/O credits for bursting.The following are the supported values for each volume type.
-
gp3
: 3,000 - 16,000 IOPS -
io1
: 100 - 64,000 IOPS -
io2
: 100 - 256,000 IOPS
This parameter is required for
io1
andio2
volume types. The default forgp3
volumes is3,000 IOPS
. This parameter is not supported forst1
,sc1
, orstandard
volume types.This parameter maps 1:1 with the
Iops
parameter of the CreateVolume API in the Amazon EC2 API Reference. - kmsKeyId
-
- Type: string
The Amazon Resource Name (ARN) identifier of the Amazon Web Services Key Management Service key to use for Amazon EBS encryption. When encryption is turned on and no Amazon Web Services Key Management Service key is specified, the default Amazon Web Services managed key for Amazon EBS volumes is used. This parameter maps 1:1 with the
KmsKeyId
parameter of the CreateVolume API in the Amazon EC2 API Reference.Amazon Web Services authenticates the Amazon Web Services Key Management Service key asynchronously. Therefore, if you specify an ID, alias, or ARN that is invalid, the action can appear to complete, but eventually fails.
- roleArn
-
- Required: Yes
- Type: string
The ARN of the IAM role to associate with this volume. This is the Amazon ECS infrastructure IAM role that is used to manage your Amazon Web Services infrastructure. We recommend using the Amazon ECS-managed
AmazonECSInfrastructureRolePolicyForVolumes
IAM policy with this role. For more information, see Amazon ECS infrastructure IAM role in the Amazon ECS Developer Guide. - sizeInGiB
-
- Type: int
The size of the volume in GiB. You must specify either a volume size or a snapshot ID. If you specify a snapshot ID, the snapshot size is used for the volume size by default. You can optionally specify a volume size greater than or equal to the snapshot size. This parameter maps 1:1 with the
Size
parameter of the CreateVolume API in the Amazon EC2 API Reference.The following are the supported volume size values for each volume type.
-
gp2
andgp3
: 1-16,384 -
io1
andio2
: 4-16,384 -
st1
andsc1
: 125-16,384 -
standard
: 1-1,024
- snapshotId
-
- Type: string
The snapshot that Amazon ECS uses to create the volume. You must specify either a snapshot ID or a volume size. This parameter maps 1:1 with the
SnapshotId
parameter of the CreateVolume API in the Amazon EC2 API Reference. - tagSpecifications
-
- Type: Array of EBSTagSpecification structures
The tags to apply to the volume. Amazon ECS applies service-managed tags by default. This parameter maps 1:1 with the
TagSpecifications.N
parameter of the CreateVolume API in the Amazon EC2 API Reference. - throughput
-
- Type: int
The throughput to provision for a volume, in MiB/s, with a maximum of 1,000 MiB/s. This parameter maps 1:1 with the
Throughput
parameter of the CreateVolume API in the Amazon EC2 API Reference.This parameter is only supported for the
gp3
volume type. - volumeType
-
- Type: string
The volume type. This parameter maps 1:1 with the
VolumeType
parameter of the CreateVolume API in the Amazon EC2 API Reference. For more information, see Amazon EBS volume types in the Amazon EC2 User Guide.The following are the supported volume types.
-
General Purpose SSD:
gp2
|gp3
-
Provisioned IOPS SSD:
io1
|io2
-
Throughput Optimized HDD:
st1
-
Cold HDD:
sc1
-
Magnetic:
standard
The magnetic volume type is not supported on Fargate.
ServiceNotActiveException
Description
The specified service isn't active. You can't update a service that's inactive. If you have previously deleted a service, you can re-create it with CreateService.
Members
ServiceNotFoundException
Description
The specified service wasn't found. You can view your available services with ListServices. Amazon ECS services are cluster specific and Region specific.
Members
ServiceRegistry
Description
The details for the service registry.
Each service may be associated with one service registry. Multiple service registries for each service are not supported.
When you add, update, or remove the service registries configuration, Amazon ECS starts a new deployment. New tasks are registered and deregistered to the updated service registry configuration.
Members
- containerName
-
- Type: string
The container name value to be used for your service discovery service. It's already specified in the task definition. If the task definition that your service task specifies uses the
bridge
orhost
network mode, you must specify acontainerName
andcontainerPort
combination from the task definition. If the task definition that your service task specifies uses theawsvpc
network mode and a type SRV DNS record is used, you must specify either acontainerName
andcontainerPort
combination or aport
value. However, you can't specify both. - containerPort
-
- Type: int
The port value to be used for your service discovery service. It's already specified in the task definition. If the task definition your service task specifies uses the
bridge
orhost
network mode, you must specify acontainerName
andcontainerPort
combination from the task definition. If the task definition your service task specifies uses theawsvpc
network mode and a type SRV DNS record is used, you must specify either acontainerName
andcontainerPort
combination or aport
value. However, you can't specify both. - port
-
- Type: int
The port value used if your service discovery service specified an SRV record. This field might be used if both the
awsvpc
network mode and SRV records are used. - registryArn
-
- Type: string
The Amazon Resource Name (ARN) of the service registry. The currently supported service registry is Cloud Map. For more information, see CreateService.
ServiceRevision
Description
Information about the service revision.
A service revision contains a record of the workload configuration Amazon ECS is attempting to deploy. Whenever you create or deploy a service, Amazon ECS automatically creates and captures the configuration that you're trying to deploy in the service revision. For information about service revisions, see Amazon ECS service revisions in the Amazon Elastic Container Service Developer Guide .
Members
- capacityProviderStrategy
-
- Type: Array of CapacityProviderStrategyItem structures
The capacity provider strategy the service revision uses.
- clusterArn
-
- Type: string
The ARN of the cluster that hosts the service.
- containerImages
-
- Type: Array of ContainerImage structures
The container images the service revision uses.
- createdAt
-
- Type: timestamp (string|DateTime or anything parsable by strtotime)
The time that the service revision was created. The format is yyyy-mm-dd HH:mm:ss.SSSSS.
- fargateEphemeralStorage
-
- Type: DeploymentEphemeralStorage structure
The amount of ephemeral storage to allocate for the deployment.
- guardDutyEnabled
-
- Type: boolean
Indicates whether Runtime Monitoring is turned on.
- launchType
-
- Type: string
The launch type the service revision uses.
- loadBalancers
-
- Type: Array of LoadBalancer structures
The load balancers the service revision uses.
- networkConfiguration
-
- Type: NetworkConfiguration structure
The network configuration for a task or service.
- platformFamily
-
- Type: string
The platform family the service revision uses.
- platformVersion
-
- Type: string
For the Fargate launch type, the platform version the service revision uses.
- serviceArn
-
- Type: string
The ARN of the service for the service revision.
- serviceConnectConfiguration
-
- Type: ServiceConnectConfiguration structure
The Service Connect configuration of your Amazon ECS service. The configuration for this service to discover and connect to services, and be discovered by, and connected from, other services within a namespace.
Tasks that run in a namespace can use short names to connect to services in the namespace. Tasks can connect to services across all of the clusters in the namespace. Tasks connect through a managed proxy container that collects logs and metrics for increased visibility. Only the tasks that Amazon ECS services create are supported with Service Connect. For more information, see Service Connect in the Amazon Elastic Container Service Developer Guide.
- serviceRegistries
-
- Type: Array of ServiceRegistry structures
The service registries (for Service Discovery) the service revision uses.
- serviceRevisionArn
-
- Type: string
The ARN of the service revision.
- taskDefinition
-
- Type: string
The task definition the service revision uses.
- volumeConfigurations
-
- Type: Array of ServiceVolumeConfiguration structures
The volumes that are configured at deployment that the service revision uses.
ServiceRevisionSummary
Description
The information about the number of requested, pending, and running tasks for a service revision.
Members
- arn
-
- Type: string
The ARN of the service revision.
- pendingTaskCount
-
- Type: int
The number of pending tasks for the service revision.
- requestedTaskCount
-
- Type: int
The number of requested tasks for the service revision.
- runningTaskCount
-
- Type: int
The number of running tasks for the service revision.
ServiceVolumeConfiguration
Description
The configuration for a volume specified in the task definition as a volume that is configured at launch time. Currently, the only supported volume type is an Amazon EBS volume.
Members
- managedEBSVolume
-
- Type: ServiceManagedEBSVolumeConfiguration structure
The configuration for the Amazon EBS volume that Amazon ECS creates and manages on your behalf. These settings are used to create each Amazon EBS volume, with one volume created for each task in the service. The Amazon EBS volumes are visible in your account in the Amazon EC2 console once they are created.
- name
-
- Required: Yes
- Type: string
The name of the volume. This value must match the volume name from the
Volume
object in the task definition.
Session
Description
The details for the execute command session.
Members
- sessionId
-
- Type: string
The ID of the execute command session.
- streamUrl
-
- Type: string
A URL to the managed agent on the container that the SSM Session Manager client uses to send commands and receive output from the container.
- tokenValue
-
- Type: string
An encrypted token value containing session and caller information. It's used to authenticate the connection to the container.
Setting
Description
The current account setting for a resource.
Members
- name
-
- Type: string
The Amazon ECS resource name.
- principalArn
-
- Type: string
The ARN of the principal. It can be a user, role, or the root user. If this field is omitted, the authenticated user is assumed.
- type
-
- Type: string
Indicates whether Amazon Web Services manages the account setting, or if the user manages it.
aws_managed
account settings are read-only, as Amazon Web Services manages such on the customer's behalf. Currently, theguardDutyActivate
account setting is the only one Amazon Web Services manages. - value
-
- Type: string
Determines whether the account setting is on or off for the specified resource.
SystemControl
Description
A list of namespaced kernel parameters to set in the container. This parameter maps to Sysctls
in the docker container create command and the --sysctl
option to docker run. For example, you can configure net.ipv4.tcp_keepalive_time
setting to maintain longer lived connections.
We don't recommend that you specify network-related systemControls
parameters for multiple containers in a single task that also uses either the awsvpc
or host
network mode. Doing this has the following disadvantages:
-
For tasks that use the
awsvpc
network mode including Fargate, if you setsystemControls
for any container, it applies to all containers in the task. If you set differentsystemControls
for multiple containers in a single task, the container that's started last determines whichsystemControls
take effect. -
For tasks that use the
host
network mode, the network namespacesystemControls
aren't supported.
If you're setting an IPC resource namespace to use for the containers in the task, the following conditions apply to your system controls. For more information, see IPC mode.
-
For tasks that use the
host
IPC mode, IPC namespacesystemControls
aren't supported. -
For tasks that use the
task
IPC mode, IPC namespacesystemControls
values apply to all containers within a task.
This parameter is not supported for Windows containers.
This parameter is only supported for tasks that are hosted on Fargate if the tasks are using platform version 1.4.0
or later (Linux). This isn't supported for Windows containers on Fargate.
Members
- namespace
-
- Type: string
The namespaced kernel parameter to set a
value
for. - value
-
- Type: string
The namespaced kernel parameter to set a
value
for.Valid IPC namespace values:
"kernel.msgmax" | "kernel.msgmnb" | "kernel.msgmni" | "kernel.sem" | "kernel.shmall" | "kernel.shmmax" | "kernel.shmmni" | "kernel.shm_rmid_forced"
, andSysctls
that start with"fs.mqueue.*"
Valid network namespace values:
Sysctls
that start with"net.*"
All of these values are supported by Fargate.
Tag
Description
The metadata that you apply to a resource to help you categorize and organize them. Each tag consists of a key and an optional value. You define them.
The following basic restrictions apply to tags:
-
Maximum number of tags per resource - 50
-
For each resource, each tag key must be unique, and each tag key can have only one value.
-
Maximum key length - 128 Unicode characters in UTF-8
-
Maximum value length - 256 Unicode characters in UTF-8
-
If your tagging schema is used across multiple services and resources, remember that other services may have restrictions on allowed characters. Generally allowed characters are: letters, numbers, and spaces representable in UTF-8, and the following characters: + - = . _ : / @.
-
Tag keys and values are case-sensitive.
-
Do not use
aws:
,AWS:
, or any upper or lowercase combination of such as a prefix for either keys or values as it is reserved for Amazon Web Services use. You cannot edit or delete tag keys or values with this prefix. Tags with this prefix do not count against your tags per resource limit.
Members
- key
-
- Type: string
One part of a key-value pair that make up a tag. A
key
is a general label that acts like a category for more specific tag values. - value
-
- Type: string
The optional part of a key-value pair that make up a tag. A
value
acts as a descriptor within a tag category (key).
TargetNotConnectedException
Description
The execute command cannot run. This error can be caused by any of the following configuration issues:
-
Incorrect IAM permissions
-
The SSM agent is not installed or is not running
-
There is an interface Amazon VPC endpoint for Amazon ECS, but there is not one for Systems Manager Session Manager
For information about how to troubleshoot the issues, see Troubleshooting issues with ECS Exec in the Amazon Elastic Container Service Developer Guide.
Members
TargetNotFoundException
Description
The specified target wasn't found. You can view your available container instances with ListContainerInstances. Amazon ECS container instances are cluster-specific and Region-specific.
Members
Task
Description
Details on a task in a cluster.
Members
- attachments
-
- Type: Array of Attachment structures
The Elastic Network Adapter that's associated with the task if the task uses the
awsvpc
network mode. - attributes
-
- Type: Array of Attribute structures
The attributes of the task
- availabilityZone
-
- Type: string
The Availability Zone for the task.
- capacityProviderName
-
- Type: string
The capacity provider that's associated with the task.
- clusterArn
-
- Type: string
The ARN of the cluster that hosts the task.
- connectivity
-
- Type: string
The connectivity status of a task.
- connectivityAt
-
- Type: timestamp (string|DateTime or anything parsable by strtotime)
The Unix timestamp for the time when the task last went into
CONNECTED
status. - containerInstanceArn
-
- Type: string
The ARN of the container instances that host the task.
- containers
-
- Type: Array of Container structures
The containers that's associated with the task.
- cpu
-
- Type: string
The number of CPU units used by the task as expressed in a task definition. It can be expressed as an integer using CPU units (for example,
1024
). It can also be expressed as a string using vCPUs (for example,1 vCPU
or1 vcpu
). String values are converted to an integer that indicates the CPU units when the task definition is registered.If you use the EC2 launch type, this field is optional. Supported values are between
128
CPU units (0.125
vCPUs) and10240
CPU units (10
vCPUs).If you use the Fargate launch type, this field is required. You must use one of the following values. These values determine the range of supported values for the
memory
parameter:The CPU units cannot be less than 1 vCPU when you use Windows containers on Fargate.
-
256 (.25 vCPU) - Available
memory
values: 512 (0.5 GB), 1024 (1 GB), 2048 (2 GB) -
512 (.5 vCPU) - Available
memory
values: 1024 (1 GB), 2048 (2 GB), 3072 (3 GB), 4096 (4 GB) -
1024 (1 vCPU) - Available
memory
values: 2048 (2 GB), 3072 (3 GB), 4096 (4 GB), 5120 (5 GB), 6144 (6 GB), 7168 (7 GB), 8192 (8 GB) -
2048 (2 vCPU) - Available
memory
values: 4096 (4 GB) and 16384 (16 GB) in increments of 1024 (1 GB) -
4096 (4 vCPU) - Available
memory
values: 8192 (8 GB) and 30720 (30 GB) in increments of 1024 (1 GB) -
8192 (8 vCPU) - Available
memory
values: 16 GB and 60 GB in 4 GB incrementsThis option requires Linux platform
1.4.0
or later. -
16384 (16vCPU) - Available
memory
values: 32GB and 120 GB in 8 GB incrementsThis option requires Linux platform
1.4.0
or later.
- createdAt
-
- Type: timestamp (string|DateTime or anything parsable by strtotime)
The Unix timestamp for the time when the task was created. More specifically, it's for the time when the task entered the
PENDING
state. - desiredStatus
-
- Type: string
The desired status of the task. For more information, see Task Lifecycle.
- enableExecuteCommand
-
- Type: boolean
Determines whether execute command functionality is turned on for this task. If
true
, execute command functionality is turned on all the containers in the task. - ephemeralStorage
-
- Type: EphemeralStorage structure
The ephemeral storage settings for the task.
- executionStoppedAt
-
- Type: timestamp (string|DateTime or anything parsable by strtotime)
The Unix timestamp for the time when the task execution stopped.
- fargateEphemeralStorage
-
- Type: TaskEphemeralStorage structure
The Fargate ephemeral storage settings for the task.
- group
-
- Type: string
The name of the task group that's associated with the task.
- healthStatus
-
- Type: string
The health status for the task. It's determined by the health of the essential containers in the task. If all essential containers in the task are reporting as
HEALTHY
, the task status also reports asHEALTHY
. If any essential containers in the task are reporting asUNHEALTHY
orUNKNOWN
, the task status also reports asUNHEALTHY
orUNKNOWN
.The Amazon ECS container agent doesn't monitor or report on Docker health checks that are embedded in a container image and not specified in the container definition. For example, this includes those specified in a parent image or from the image's Dockerfile. Health check parameters that are specified in a container definition override any Docker health checks that are found in the container image.
- inferenceAccelerators
-
- Type: Array of InferenceAccelerator structures
The Elastic Inference accelerator that's associated with the task.
- lastStatus
-
- Type: string
The last known status for the task. For more information, see Task Lifecycle.
- launchType
-
- Type: string
The infrastructure where your task runs on. For more information, see Amazon ECS launch types in the Amazon Elastic Container Service Developer Guide.
- memory
-
- Type: string
The amount of memory (in MiB) that the task uses as expressed in a task definition. It can be expressed as an integer using MiB (for example,
1024
). If it's expressed as a string using GB (for example,1GB
or1 GB
), it's converted to an integer indicating the MiB when the task definition is registered.If you use the EC2 launch type, this field is optional.
If you use the Fargate launch type, this field is required. You must use one of the following values. The value that you choose determines the range of supported values for the
cpu
parameter.-
512 (0.5 GB), 1024 (1 GB), 2048 (2 GB) - Available
cpu
values: 256 (.25 vCPU) -
1024 (1 GB), 2048 (2 GB), 3072 (3 GB), 4096 (4 GB) - Available
cpu
values: 512 (.5 vCPU) -
2048 (2 GB), 3072 (3 GB), 4096 (4 GB), 5120 (5 GB), 6144 (6 GB), 7168 (7 GB), 8192 (8 GB) - Available
cpu
values: 1024 (1 vCPU) -
Between 4096 (4 GB) and 16384 (16 GB) in increments of 1024 (1 GB) - Available
cpu
values: 2048 (2 vCPU) -
Between 8192 (8 GB) and 30720 (30 GB) in increments of 1024 (1 GB) - Available
cpu
values: 4096 (4 vCPU) -
Between 16 GB and 60 GB in 4 GB increments - Available
cpu
values: 8192 (8 vCPU)This option requires Linux platform
1.4.0
or later. -
Between 32GB and 120 GB in 8 GB increments - Available
cpu
values: 16384 (16 vCPU)This option requires Linux platform
1.4.0
or later.
- overrides
-
- Type: TaskOverride structure
One or more container overrides.
- platformFamily
-
- Type: string
The operating system that your tasks are running on. A platform family is specified only for tasks that use the Fargate launch type.
All tasks that run as part of this service must use the same
platformFamily
value as the service (for example,LINUX.
). - platformVersion
-
- Type: string
The platform version where your task runs on. A platform version is only specified for tasks that use the Fargate launch type. If you didn't specify one, the
LATEST
platform version is used. For more information, see Fargate Platform Versions in the Amazon Elastic Container Service Developer Guide. - pullStartedAt
-
- Type: timestamp (string|DateTime or anything parsable by strtotime)
The Unix timestamp for the time when the container image pull began.
- pullStoppedAt
-
- Type: timestamp (string|DateTime or anything parsable by strtotime)
The Unix timestamp for the time when the container image pull completed.
- startedAt
-
- Type: timestamp (string|DateTime or anything parsable by strtotime)
The Unix timestamp for the time when the task started. More specifically, it's for the time when the task transitioned from the
PENDING
state to theRUNNING
state. - startedBy
-
- Type: string
The tag specified when a task is started. If an Amazon ECS service started the task, the
startedBy
parameter contains the deployment ID of that service. - stopCode
-
- Type: string
The stop code indicating why a task was stopped. The
stoppedReason
might contain additional details.For more information about stop code, see Stopped tasks error codes in the Amazon ECS Developer Guide.
- stoppedAt
-
- Type: timestamp (string|DateTime or anything parsable by strtotime)
The Unix timestamp for the time when the task was stopped. More specifically, it's for the time when the task transitioned from the
RUNNING
state to theSTOPPED
state. - stoppedReason
-
- Type: string
The reason that the task was stopped.
- stoppingAt
-
- Type: timestamp (string|DateTime or anything parsable by strtotime)
The Unix timestamp for the time when the task stops. More specifically, it's for the time when the task transitions from the
RUNNING
state toSTOPPING
. - tags
-
- Type: Array of Tag structures
The metadata that you apply to the task to help you categorize and organize the task. Each tag consists of a key and an optional value. You define both the key and value.
The following basic restrictions apply to tags:
-
Maximum number of tags per resource - 50
-
For each resource, each tag key must be unique, and each tag key can have only one value.
-
Maximum key length - 128 Unicode characters in UTF-8
-
Maximum value length - 256 Unicode characters in UTF-8
-
If your tagging schema is used across multiple services and resources, remember that other services may have restrictions on allowed characters. Generally allowed characters are: letters, numbers, and spaces representable in UTF-8, and the following characters: + - = . _ : / @.
-
Tag keys and values are case-sensitive.
-
Do not use
aws:
,AWS:
, or any upper or lowercase combination of such as a prefix for either keys or values as it is reserved for Amazon Web Services use. You cannot edit or delete tag keys or values with this prefix. Tags with this prefix do not count against your tags per resource limit.
- taskArn
-
- Type: string
The Amazon Resource Name (ARN) of the task.
- taskDefinitionArn
-
- Type: string
The ARN of the task definition that creates the task.
- version
-
- Type: long (int|float)
The version counter for the task. Every time a task experiences a change that starts a CloudWatch event, the version counter is incremented. If you replicate your Amazon ECS task state with CloudWatch Events, you can compare the version of a task reported by the Amazon ECS API actions with the version reported in CloudWatch Events for the task (inside the
detail
object) to verify that the version in your event stream is current.
TaskDefinition
Description
The details of a task definition which describes the container and volume definitions of an Amazon Elastic Container Service task. You can specify which Docker images to use, the required resources, and other configurations related to launching the task definition through an Amazon ECS service or task.
Members
- compatibilities
-
- Type: Array of strings
Amazon ECS validates the task definition parameters with those supported by the launch type. For more information, see Amazon ECS launch types in the Amazon Elastic Container Service Developer Guide.
- containerDefinitions
-
- Type: Array of ContainerDefinition structures
A list of container definitions in JSON format that describe the different containers that make up your task. For more information about container definition parameters and defaults, see Amazon ECS Task Definitions in the Amazon Elastic Container Service Developer Guide.
- cpu
-
- Type: string
The number of
cpu
units used by the task. If you use the EC2 launch type, this field is optional. Any value can be used. If you use the Fargate launch type, this field is required. You must use one of the following values. The value that you choose determines your range of valid values for thememory
parameter.If you use the EC2 launch type, this field is optional. Supported values are between
128
CPU units (0.125
vCPUs) and10240
CPU units (10
vCPUs).The CPU units cannot be less than 1 vCPU when you use Windows containers on Fargate.
-
256 (.25 vCPU) - Available
memory
values: 512 (0.5 GB), 1024 (1 GB), 2048 (2 GB) -
512 (.5 vCPU) - Available
memory
values: 1024 (1 GB), 2048 (2 GB), 3072 (3 GB), 4096 (4 GB) -
1024 (1 vCPU) - Available
memory
values: 2048 (2 GB), 3072 (3 GB), 4096 (4 GB), 5120 (5 GB), 6144 (6 GB), 7168 (7 GB), 8192 (8 GB) -
2048 (2 vCPU) - Available
memory
values: 4096 (4 GB) and 16384 (16 GB) in increments of 1024 (1 GB) -
4096 (4 vCPU) - Available
memory
values: 8192 (8 GB) and 30720 (30 GB) in increments of 1024 (1 GB) -
8192 (8 vCPU) - Available
memory
values: 16 GB and 60 GB in 4 GB incrementsThis option requires Linux platform
1.4.0
or later. -
16384 (16vCPU) - Available
memory
values: 32GB and 120 GB in 8 GB incrementsThis option requires Linux platform
1.4.0
or later.
- deregisteredAt
-
- Type: timestamp (string|DateTime or anything parsable by strtotime)
The Unix timestamp for the time when the task definition was deregistered.
- ephemeralStorage
-
- Type: EphemeralStorage structure
The ephemeral storage settings to use for tasks run with the task definition.
- executionRoleArn
-
- Type: string
The Amazon Resource Name (ARN) of the task execution role that grants the Amazon ECS container agent permission to make Amazon Web Services API calls on your behalf. For informationabout the required IAM roles for Amazon ECS, see IAM roles for Amazon ECS in the Amazon Elastic Container Service Developer Guide.
- family
-
- Type: string
The name of a family that this task definition is registered to. Up to 255 characters are allowed. Letters (both uppercase and lowercase letters), numbers, hyphens (-), and underscores (_) are allowed.
A family groups multiple versions of a task definition. Amazon ECS gives the first task definition that you registered to a family a revision number of 1. Amazon ECS gives sequential revision numbers to each task definition that you add.
- inferenceAccelerators
-
- Type: Array of InferenceAccelerator structures
The Elastic Inference accelerator that's associated with the task.
- ipcMode
-
- Type: string
The IPC resource namespace to use for the containers in the task. The valid values are
host
,task
, ornone
. Ifhost
is specified, then all containers within the tasks that specified thehost
IPC mode on the same container instance share the same IPC resources with the host Amazon EC2 instance. Iftask
is specified, all containers within the specified task share the same IPC resources. Ifnone
is specified, then IPC resources within the containers of a task are private and not shared with other containers in a task or on the container instance. If no value is specified, then the IPC resource namespace sharing depends on the Docker daemon setting on the container instance. For more information, see IPC settings in the Docker run reference.If the
host
IPC mode is used, be aware that there is a heightened risk of undesired IPC namespace expose. For more information, see Docker security.If you are setting namespaced kernel parameters using
systemControls
for the containers in the task, the following will apply to your IPC resource namespace. For more information, see System Controls in the Amazon Elastic Container Service Developer Guide.-
For tasks that use the
host
IPC mode, IPC namespace relatedsystemControls
are not supported. -
For tasks that use the
task
IPC mode, IPC namespace relatedsystemControls
will apply to all containers within a task.
This parameter is not supported for Windows containers or tasks run on Fargate.
- memory
-
- Type: string
The amount (in MiB) of memory used by the task.
If your tasks runs on Amazon EC2 instances, you must specify either a task-level memory value or a container-level memory value. This field is optional and any value can be used. If a task-level memory value is specified, the container-level memory value is optional. For more information regarding container-level memory and memory reservation, see ContainerDefinition.
If your tasks runs on Fargate, this field is required. You must use one of the following values. The value you choose determines your range of valid values for the
cpu
parameter.-
512 (0.5 GB), 1024 (1 GB), 2048 (2 GB) - Available
cpu
values: 256 (.25 vCPU) -
1024 (1 GB), 2048 (2 GB), 3072 (3 GB), 4096 (4 GB) - Available
cpu
values: 512 (.5 vCPU) -
2048 (2 GB), 3072 (3 GB), 4096 (4 GB), 5120 (5 GB), 6144 (6 GB), 7168 (7 GB), 8192 (8 GB) - Available
cpu
values: 1024 (1 vCPU) -
Between 4096 (4 GB) and 16384 (16 GB) in increments of 1024 (1 GB) - Available
cpu
values: 2048 (2 vCPU) -
Between 8192 (8 GB) and 30720 (30 GB) in increments of 1024 (1 GB) - Available
cpu
values: 4096 (4 vCPU) -
Between 16 GB and 60 GB in 4 GB increments - Available
cpu
values: 8192 (8 vCPU)This option requires Linux platform
1.4.0
or later. -
Between 32GB and 120 GB in 8 GB increments - Available
cpu
values: 16384 (16 vCPU)This option requires Linux platform
1.4.0
or later.
- networkMode
-
- Type: string
The Docker networking mode to use for the containers in the task. The valid values are
none
,bridge
,awsvpc
, andhost
. If no network mode is specified, the default isbridge
.For Amazon ECS tasks on Fargate, the
awsvpc
network mode is required. For Amazon ECS tasks on Amazon EC2 Linux instances, any network mode can be used. For Amazon ECS tasks on Amazon EC2 Windows instances,<default>
orawsvpc
can be used. If the network mode is set tonone
, you cannot specify port mappings in your container definitions, and the tasks containers do not have external connectivity. Thehost
andawsvpc
network modes offer the highest networking performance for containers because they use the EC2 network stack instead of the virtualized network stack provided by thebridge
mode.With the
host
andawsvpc
network modes, exposed container ports are mapped directly to the corresponding host port (for thehost
network mode) or the attached elastic network interface port (for theawsvpc
network mode), so you cannot take advantage of dynamic host port mappings.When using the
host
network mode, you should not run containers using the root user (UID 0). It is considered best practice to use a non-root user.If the network mode is
awsvpc
, the task is allocated an elastic network interface, and you must specify a NetworkConfiguration value when you create a service or run a task with the task definition. For more information, see Task Networking in the Amazon Elastic Container Service Developer Guide.If the network mode is
host
, you cannot run multiple instantiations of the same task on a single container instance when port mappings are used.For more information, see Network settings in the Docker run reference.
- pidMode
-
- Type: string
The process namespace to use for the containers in the task. The valid values are
host
ortask
. On Fargate for Linux containers, the only valid value istask
. For example, monitoring sidecars might needpidMode
to access information about other containers running in the same task.If
host
is specified, all containers within the tasks that specified thehost
PID mode on the same container instance share the same process namespace with the host Amazon EC2 instance.If
task
is specified, all containers within the specified task share the same process namespace.If no value is specified, the default is a private namespace for each container. For more information, see PID settings in the Docker run reference.
If the
host
PID mode is used, there's a heightened risk of undesired process namespace exposure. For more information, see Docker security.This parameter is not supported for Windows containers.
This parameter is only supported for tasks that are hosted on Fargate if the tasks are using platform version
1.4.0
or later (Linux). This isn't supported for Windows containers on Fargate. - placementConstraints
-
- Type: Array of TaskDefinitionPlacementConstraint structures
An array of placement constraint objects to use for tasks.
This parameter isn't supported for tasks run on Fargate.
- proxyConfiguration
-
- Type: ProxyConfiguration structure
The configuration details for the App Mesh proxy.
Your Amazon ECS container instances require at least version 1.26.0 of the container agent and at least version 1.26.0-1 of the
ecs-init
package to use a proxy configuration. If your container instances are launched from the Amazon ECS optimized AMI version20190301
or later, they contain the required versions of the container agent andecs-init
. For more information, see Amazon ECS-optimized Linux AMI in the Amazon Elastic Container Service Developer Guide. - registeredAt
-
- Type: timestamp (string|DateTime or anything parsable by strtotime)
The Unix timestamp for the time when the task definition was registered.
- registeredBy
-
- Type: string
The principal that registered the task definition.
- requiresAttributes
-
- Type: Array of Attribute structures
The container instance attributes required by your task. When an Amazon EC2 instance is registered to your cluster, the Amazon ECS container agent assigns some standard attributes to the instance. You can apply custom attributes. These are specified as key-value pairs using the Amazon ECS console or the PutAttributes API. These attributes are used when determining task placement for tasks hosted on Amazon EC2 instances. For more information, see Attributes in the Amazon Elastic Container Service Developer Guide.
This parameter isn't supported for tasks run on Fargate.
- requiresCompatibilities
-
- Type: Array of strings
The task launch types the task definition was validated against. The valid values are
EC2
,FARGATE
, andEXTERNAL
. For more information, see Amazon ECS launch types in the Amazon Elastic Container Service Developer Guide. - revision
-
- Type: int
The revision of the task in a particular family. The revision is a version number of a task definition in a family. When you register a task definition for the first time, the revision is
1
. Each time that you register a new revision of a task definition in the same family, the revision value always increases by one. This is even if you deregistered previous revisions in this family. - runtimePlatform
-
- Type: RuntimePlatform structure
The operating system that your task definitions are running on. A platform family is specified only for tasks using the Fargate launch type.
When you specify a task in a service, this value must match the
runtimePlatform
value of the service. - status
-
- Type: string
The status of the task definition.
- taskDefinitionArn
-
- Type: string
The full Amazon Resource Name (ARN) of the task definition.
- taskRoleArn
-
- Type: string
The short name or full Amazon Resource Name (ARN) of the Identity and Access Management role that grants containers in the task permission to call Amazon Web Services APIs on your behalf. For informationabout the required IAM roles for Amazon ECS, see IAM roles for Amazon ECS in the Amazon Elastic Container Service Developer Guide.
- volumes
-
- Type: Array of Volume structures
The list of data volume definitions for the task. For more information, see Using data volumes in tasks in the Amazon Elastic Container Service Developer Guide.
The
host
andsourcePath
parameters aren't supported for tasks run on Fargate.
TaskDefinitionPlacementConstraint
Description
The constraint on task placement in the task definition. For more information, see Task placement constraints in the Amazon Elastic Container Service Developer Guide.
Task placement constraints aren't supported for tasks run on Fargate.
Members
- expression
-
- Type: string
A cluster query language expression to apply to the constraint. For more information, see Cluster query language in the Amazon Elastic Container Service Developer Guide.
- type
-
- Type: string
The type of constraint. The
MemberOf
constraint restricts selection to be from a group of valid candidates.
TaskEphemeralStorage
Description
The amount of ephemeral storage to allocate for the task.
Members
- kmsKeyId
-
- Type: string
Specify an Amazon Web Services Key Management Service key ID to encrypt the ephemeral storage for the task.
- sizeInGiB
-
- Type: int
The total amount, in GiB, of the ephemeral storage to set for the task. The minimum supported value is
20
GiB and the maximum supported value is200
GiB.
TaskManagedEBSVolumeConfiguration
Description
The configuration for the Amazon EBS volume that Amazon ECS creates and manages on your behalf. These settings are used to create each Amazon EBS volume, with one volume created for each task.
Members
- encrypted
-
- Type: boolean
Indicates whether the volume should be encrypted. If no value is specified, encryption is turned on by default. This parameter maps 1:1 with the
Encrypted
parameter of the CreateVolume API in the Amazon EC2 API Reference. - filesystemType
-
- Type: string
The Linux filesystem type for the volume. For volumes created from a snapshot, you must specify the same filesystem type that the volume was using when the snapshot was created. If there is a filesystem type mismatch, the task will fail to start.
The available filesystem types are
ext3
,ext4
, andxfs
. If no value is specified, thexfs
filesystem type is used by default. - iops
-
- Type: int
The number of I/O operations per second (IOPS). For
gp3
,io1
, andio2
volumes, this represents the number of IOPS that are provisioned for the volume. Forgp2
volumes, this represents the baseline performance of the volume and the rate at which the volume accumulates I/O credits for bursting.The following are the supported values for each volume type.
-
gp3
: 3,000 - 16,000 IOPS -
io1
: 100 - 64,000 IOPS -
io2
: 100 - 256,000 IOPS
This parameter is required for
io1
andio2
volume types. The default forgp3
volumes is3,000 IOPS
. This parameter is not supported forst1
,sc1
, orstandard
volume types.This parameter maps 1:1 with the
Iops
parameter of the CreateVolume API in the Amazon EC2 API Reference. - kmsKeyId
-
- Type: string
The Amazon Resource Name (ARN) identifier of the Amazon Web Services Key Management Service key to use for Amazon EBS encryption. When encryption is turned on and no Amazon Web Services Key Management Service key is specified, the default Amazon Web Services managed key for Amazon EBS volumes is used. This parameter maps 1:1 with the
KmsKeyId
parameter of the CreateVolume API in the Amazon EC2 API Reference.Amazon Web Services authenticates the Amazon Web Services Key Management Service key asynchronously. Therefore, if you specify an ID, alias, or ARN that is invalid, the action can appear to complete, but eventually fails.
- roleArn
-
- Required: Yes
- Type: string
The ARN of the IAM role to associate with this volume. This is the Amazon ECS infrastructure IAM role that is used to manage your Amazon Web Services infrastructure. We recommend using the Amazon ECS-managed
AmazonECSInfrastructureRolePolicyForVolumes
IAM policy with this role. For more information, see Amazon ECS infrastructure IAM role in the Amazon ECS Developer Guide. - sizeInGiB
-
- Type: int
The size of the volume in GiB. You must specify either a volume size or a snapshot ID. If you specify a snapshot ID, the snapshot size is used for the volume size by default. You can optionally specify a volume size greater than or equal to the snapshot size. This parameter maps 1:1 with the
Size
parameter of the CreateVolume API in the Amazon EC2 API Reference.The following are the supported volume size values for each volume type.
-
gp2
andgp3
: 1-16,384 -
io1
andio2
: 4-16,384 -
st1
andsc1
: 125-16,384 -
standard
: 1-1,024
- snapshotId
-
- Type: string
The snapshot that Amazon ECS uses to create the volume. You must specify either a snapshot ID or a volume size. This parameter maps 1:1 with the
SnapshotId
parameter of the CreateVolume API in the Amazon EC2 API Reference. - tagSpecifications
-
- Type: Array of EBSTagSpecification structures
The tags to apply to the volume. Amazon ECS applies service-managed tags by default. This parameter maps 1:1 with the
TagSpecifications.N
parameter of the CreateVolume API in the Amazon EC2 API Reference. - terminationPolicy
-
- Type: TaskManagedEBSVolumeTerminationPolicy structure
The termination policy for the volume when the task exits. This provides a way to control whether Amazon ECS terminates the Amazon EBS volume when the task stops.
- throughput
-
- Type: int
The throughput to provision for a volume, in MiB/s, with a maximum of 1,000 MiB/s. This parameter maps 1:1 with the
Throughput
parameter of the CreateVolume API in the Amazon EC2 API Reference.This parameter is only supported for the
gp3
volume type. - volumeType
-
- Type: string
The volume type. This parameter maps 1:1 with the
VolumeType
parameter of the CreateVolume API in the Amazon EC2 API Reference. For more information, see Amazon EBS volume types in the Amazon EC2 User Guide.The following are the supported volume types.
-
General Purpose SSD:
gp2
|gp3
-
Provisioned IOPS SSD:
io1
|io2
-
Throughput Optimized HDD:
st1
-
Cold HDD:
sc1
-
Magnetic:
standard
The magnetic volume type is not supported on Fargate.
TaskManagedEBSVolumeTerminationPolicy
Description
The termination policy for the Amazon EBS volume when the task exits. For more information, see Amazon ECS volume termination policy.
Members
- deleteOnTermination
-
- Required: Yes
- Type: boolean
Indicates whether the volume should be deleted on when the task stops. If a value of
true
is specified, Amazon ECS deletes the Amazon EBS volume on your behalf when the task goes into theSTOPPED
state. If no value is specified, the default value istrue
is used. When set tofalse
, Amazon ECS leaves the volume in your account.
TaskOverride
Description
The overrides that are associated with a task.
Members
- containerOverrides
-
- Type: Array of ContainerOverride structures
One or more container overrides that are sent to a task.
- cpu
-
- Type: string
The CPU override for the task.
- ephemeralStorage
-
- Type: EphemeralStorage structure
The ephemeral storage setting override for the task.
This parameter is only supported for tasks hosted on Fargate that use the following platform versions:
-
Linux platform version
1.4.0
or later. -
Windows platform version
1.0.0
or later.
- executionRoleArn
-
- Type: string
The Amazon Resource Name (ARN) of the task execution role override for the task. For more information, see Amazon ECS task execution IAM role in the Amazon Elastic Container Service Developer Guide.
- inferenceAcceleratorOverrides
-
- Type: Array of InferenceAcceleratorOverride structures
The Elastic Inference accelerator override for the task.
- memory
-
- Type: string
The memory override for the task.
- taskRoleArn
-
- Type: string
The Amazon Resource Name (ARN) of the role that containers in this task can assume. All containers in this task are granted the permissions that are specified in this role. For more information, see IAM Role for Tasks in the Amazon Elastic Container Service Developer Guide.
TaskSet
Description
Information about a set of Amazon ECS tasks in either an CodeDeploy or an EXTERNAL
deployment. An Amazon ECS task set includes details such as the desired number of tasks, how many tasks are running, and whether the task set serves production traffic.
Members
- capacityProviderStrategy
-
- Type: Array of CapacityProviderStrategyItem structures
The capacity provider strategy that are associated with the task set.
- clusterArn
-
- Type: string
The Amazon Resource Name (ARN) of the cluster that the service that hosts the task set exists in.
- computedDesiredCount
-
- Type: int
The computed desired count for the task set. This is calculated by multiplying the service's
desiredCount
by the task set'sscale
percentage. The result is always rounded up. For example, if the computed desired count is 1.2, it rounds up to 2 tasks. - createdAt
-
- Type: timestamp (string|DateTime or anything parsable by strtotime)
The Unix timestamp for the time when the task set was created.
- externalId
-
- Type: string
The external ID associated with the task set.
If an CodeDeploy deployment created a task set, the
externalId
parameter contains the CodeDeploy deployment ID.If a task set is created for an external deployment and is associated with a service discovery registry, the
externalId
parameter contains theECS_TASK_SET_EXTERNAL_ID
Cloud Map attribute. - fargateEphemeralStorage
-
- Type: DeploymentEphemeralStorage structure
The Fargate ephemeral storage settings for the task set.
- id
-
- Type: string
The ID of the task set.
- launchType
-
- Type: string
The launch type the tasks in the task set are using. For more information, see Amazon ECS launch types in the Amazon Elastic Container Service Developer Guide.
- loadBalancers
-
- Type: Array of LoadBalancer structures
Details on a load balancer that are used with a task set.
- networkConfiguration
-
- Type: NetworkConfiguration structure
The network configuration for the task set.
- pendingCount
-
- Type: int
The number of tasks in the task set that are in the
PENDING
status during a deployment. A task in thePENDING
state is preparing to enter theRUNNING
state. A task set enters thePENDING
status when it launches for the first time or when it's restarted after being in theSTOPPED
state. - platformFamily
-
- Type: string
The operating system that your tasks in the set are running on. A platform family is specified only for tasks that use the Fargate launch type.
All tasks in the set must have the same value.
- platformVersion
-
- Type: string
The Fargate platform version where the tasks in the task set are running. A platform version is only specified for tasks run on Fargate. For more information, see Fargate platform versions in the Amazon Elastic Container Service Developer Guide.
- runningCount
-
- Type: int
The number of tasks in the task set that are in the
RUNNING
status during a deployment. A task in theRUNNING
state is running and ready for use. - scale
-
- Type: Scale structure
A floating-point percentage of your desired number of tasks to place and keep running in the task set.
- serviceArn
-
- Type: string
The Amazon Resource Name (ARN) of the service the task set exists in.
- serviceRegistries
-
- Type: Array of ServiceRegistry structures
The details for the service discovery registries to assign to this task set. For more information, see Service discovery.
- stabilityStatus
-
- Type: string
The stability status. This indicates whether the task set has reached a steady state. If the following conditions are met, the task set are in
STEADY_STATE
:-
The task
runningCount
is equal to thecomputedDesiredCount
. -
The
pendingCount
is0
. -
There are no tasks that are running on container instances in the
DRAINING
status. -
All tasks are reporting a healthy status from the load balancers, service discovery, and container health checks.
If any of those conditions aren't met, the stability status returns
STABILIZING
. - stabilityStatusAt
-
- Type: timestamp (string|DateTime or anything parsable by strtotime)
The Unix timestamp for the time when the task set stability status was retrieved.
- startedBy
-
- Type: string
The tag specified when a task set is started. If an CodeDeploy deployment created the task set, the
startedBy
parameter isCODE_DEPLOY
. If an external deployment created the task set, thestartedBy
field isn't used. - status
-
- Type: string
The status of the task set. The following describes each state.
- PRIMARY
-
The task set is serving production traffic.
- ACTIVE
-
The task set isn't serving production traffic.
- DRAINING
-
The tasks in the task set are being stopped, and their corresponding targets are being deregistered from their target group.
- tags
-
- Type: Array of Tag structures
The metadata that you apply to the task set to help you categorize and organize them. Each tag consists of a key and an optional value. You define both.
The following basic restrictions apply to tags:
-
Maximum number of tags per resource - 50
-
For each resource, each tag key must be unique, and each tag key can have only one value.
-
Maximum key length - 128 Unicode characters in UTF-8
-
Maximum value length - 256 Unicode characters in UTF-8
-
If your tagging schema is used across multiple services and resources, remember that other services may have restrictions on allowed characters. Generally allowed characters are: letters, numbers, and spaces representable in UTF-8, and the following characters: + - = . _ : / @.
-
Tag keys and values are case-sensitive.
-
Do not use
aws:
,AWS:
, or any upper or lowercase combination of such as a prefix for either keys or values as it is reserved for Amazon Web Services use. You cannot edit or delete tag keys or values with this prefix. Tags with this prefix do not count against your tags per resource limit.
- taskDefinition
-
- Type: string
The task definition that the task set is using.
- taskSetArn
-
- Type: string
The Amazon Resource Name (ARN) of the task set.
- updatedAt
-
- Type: timestamp (string|DateTime or anything parsable by strtotime)
The Unix timestamp for the time when the task set was last updated.
TaskSetNotFoundException
Description
The specified task set wasn't found. You can view your available task sets with DescribeTaskSets. Task sets are specific to each cluster, service and Region.
Members
TaskVolumeConfiguration
Description
Configuration settings for the task volume that was configuredAtLaunch
that weren't set during RegisterTaskDef
.
Members
- managedEBSVolume
-
- Type: TaskManagedEBSVolumeConfiguration structure
The configuration for the Amazon EBS volume that Amazon ECS creates and manages on your behalf. These settings are used to create each Amazon EBS volume, with one volume created for each task. The Amazon EBS volumes are visible in your account in the Amazon EC2 console once they are created.
- name
-
- Required: Yes
- Type: string
The name of the volume. This value must match the volume name from the
Volume
object in the task definition.
TimeoutConfiguration
Description
An object that represents the timeout configurations for Service Connect.
If idleTimeout
is set to a time that is less than perRequestTimeout
, the connection will close when the idleTimeout
is reached and not the perRequestTimeout
.
Members
- idleTimeoutSeconds
-
- Type: int
The amount of time in seconds a connection will stay active while idle. A value of
0
can be set to disableidleTimeout
.The
idleTimeout
default forHTTP
/HTTP2
/GRPC
is 5 minutes.The
idleTimeout
default forTCP
is 1 hour. - perRequestTimeoutSeconds
-
- Type: int
The amount of time waiting for the upstream to respond with a complete response per request. A value of
0
can be set to disableperRequestTimeout
.perRequestTimeout
can only be set if Service ConnectappProtocol
isn'tTCP
. OnlyidleTimeout
is allowed forTCP
appProtocol
.
Tmpfs
Description
The container path, mount options, and size of the tmpfs mount.
Members
- containerPath
-
- Required: Yes
- Type: string
The absolute file path where the tmpfs volume is to be mounted.
- mountOptions
-
- Type: Array of strings
The list of tmpfs volume mount options.
Valid values:
"defaults" | "ro" | "rw" | "suid" | "nosuid" | "dev" | "nodev" | "exec" | "noexec" | "sync" | "async" | "dirsync" | "remount" | "mand" | "nomand" | "atime" | "noatime" | "diratime" | "nodiratime" | "bind" | "rbind" | "unbindable" | "runbindable" | "private" | "rprivate" | "shared" | "rshared" | "slave" | "rslave" | "relatime" | "norelatime" | "strictatime" | "nostrictatime" | "mode" | "uid" | "gid" | "nr_inodes" | "nr_blocks" | "mpol"
- size
-
- Required: Yes
- Type: int
The maximum size (in MiB) of the tmpfs volume.
Ulimit
Description
The ulimit
settings to pass to the container.
Amazon ECS tasks hosted on Fargate use the default resource limit values set by the operating system with the exception of the nofile
resource limit parameter which Fargate overrides. The nofile
resource limit sets a restriction on the number of open files that a container can use. The default nofile
soft limit is 65535
and the default hard limit is 65535
.
You can specify the ulimit
settings for a container in a task definition.
Members
- hardLimit
-
- Required: Yes
- Type: int
The hard limit for the
ulimit
type. The value can be specified in bytes, seconds, or as a count, depending on thetype
of theulimit
. - name
-
- Required: Yes
- Type: string
The
type
of theulimit
. - softLimit
-
- Required: Yes
- Type: int
The soft limit for the
ulimit
type. The value can be specified in bytes, seconds, or as a count, depending on thetype
of theulimit
.
UnsupportedFeatureException
Description
The specified task isn't supported in this Region.
Members
UpdateInProgressException
Description
There's already a current Amazon ECS container agent update in progress on the container instance that's specified. If the container agent becomes disconnected while it's in a transitional stage, such as PENDING
or STAGING
, the update process can get stuck in that state. However, when the agent reconnects, it resumes where it stopped previously.
Members
VersionInfo
Description
The Docker and Amazon ECS container agent version information about a container instance.
Members
- agentHash
-
- Type: string
The Git commit hash for the Amazon ECS container agent build on the amazon-ecs-agent GitHub repository.
- agentVersion
-
- Type: string
The version number of the Amazon ECS container agent.
- dockerVersion
-
- Type: string
The Docker version that's running on the container instance.
Volume
Description
The data volume configuration for tasks launched using this task definition. Specifying a volume configuration in a task definition is optional. The volume configuration may contain multiple volumes but only one volume configured at launch is supported. Each volume defined in the volume configuration may only specify a name
and one of either configuredAtLaunch
, dockerVolumeConfiguration
, efsVolumeConfiguration
, fsxWindowsFileServerVolumeConfiguration
, or host
. If an empty volume configuration is specified, by default Amazon ECS uses a host volume. For more information, see Using data volumes in tasks.
Members
- configuredAtLaunch
-
- Type: boolean
Indicates whether the volume should be configured at launch time. This is used to create Amazon EBS volumes for standalone tasks or tasks created as part of a service. Each task definition revision may only have one volume configured at launch in the volume configuration.
To configure a volume at launch time, use this task definition revision and specify a
volumeConfigurations
object when calling theCreateService
,UpdateService
,RunTask
orStartTask
APIs. - dockerVolumeConfiguration
-
- Type: DockerVolumeConfiguration structure
This parameter is specified when you use Docker volumes.
Windows containers only support the use of the
local
driver. To use bind mounts, specify thehost
parameter instead.Docker volumes aren't supported by tasks run on Fargate.
- efsVolumeConfiguration
-
- Type: EFSVolumeConfiguration structure
This parameter is specified when you use an Amazon Elastic File System file system for task storage.
- fsxWindowsFileServerVolumeConfiguration
-
- Type: FSxWindowsFileServerVolumeConfiguration structure
This parameter is specified when you use Amazon FSx for Windows File Server file system for task storage.
- host
-
- Type: HostVolumeProperties structure
This parameter is specified when you use bind mount host volumes. The contents of the
host
parameter determine whether your bind mount host volume persists on the host container instance and where it's stored. If thehost
parameter is empty, then the Docker daemon assigns a host path for your data volume. However, the data isn't guaranteed to persist after the containers that are associated with it stop running.Windows containers can mount whole directories on the same drive as
$env:ProgramData
. Windows containers can't mount directories on a different drive, and mount point can't be across drives. For example, you can mountC:\my\path:C:\my\path
andD:\:D:\
, but notD:\my\path:C:\my\path
orD:\:C:\my\path
. - name
-
- Type: string
The name of the volume. Up to 255 letters (uppercase and lowercase), numbers, underscores, and hyphens are allowed.
When using a volume configured at launch, the
name
is required and must also be specified as the volume name in theServiceVolumeConfiguration
orTaskVolumeConfiguration
parameter when creating your service or standalone task.For all other types of volumes, this name is referenced in the
sourceVolume
parameter of themountPoints
object in the container definition.When a volume is using the
efsVolumeConfiguration
, the name is required.
VolumeFrom
Description
Details on a data volume from another container in the same task definition.
Members
- readOnly
-
- Type: boolean
If this value is
true
, the container has read-only access to the volume. If this value isfalse
, then the container can write to the volume. The default value isfalse
. - sourceContainer
-
- Type: string
The name of another container within the same task definition to mount volumes from.