Go SDK

With the Go SDK, you can run experiments and activate feature flags. Integrating our SDK into your web-application is easy, and its footprint (memory and network usage) is low.

Getting started: For help getting started, see the developer guide.

Changelog: Latest version of the Go SDK: 3.5.0 Changelog.

SDK methods: For the full reference documentation of the Go SDK, see the reference section.

Developer guide

Follow this section to install and configure the SDK as well as learn about advanced features.

Getting started

Installing the Go client

To install the Kameleoon Go SDK, you can use the go get command and install our package directly from our GitHub repository. Simply run the command below:

go get github.com/Kameleoon/client-go/v3

Additional configuration

To provide additional settings for the Go SDK, you can use a configuration file, which allows you to customize the SDK's behavior. You can download a sample configuration file from here.

We recommend installing this file to the default path of /etc/kameleoon/client-go.yaml, which will be read automatically. If you need to customize this, you can provide an additional argument to the NewClient() method. You can either specify a string that indicates an alternative path to the configuration file or directly add a JavaScript object (map) containing the configuration.

The current version of the Go SDK has the following keys available in the configuration file:

Key	Description
client_id	A client_id is required for authentication to the Kameleoon service.
client_secret	A client_secret is required for authentication to the Kameleoon service.
top_level_domain	The current top-level domain for your website . Use the format: example.com. Don’t include https://, www, or other subdomains. Kameleoon uses this information to set the corresponding cookie on the top-level domain. This field is mandatory.
session_duration	Sets the time interval that Kameleoon stores the visitor and their associated data in memory (RAM). Note that increasing the session duration increases the amount of RAM that needs to be allocated to store visitor data. The default session duration is 30 minutes.
refresh_interval	This setting specifies the refresh interval, in minutes, for fetching the configuration of experiments and feature flags that are currently active. The value set here determines the maximum time it takes to propagate changes, such as activating or deactivating feature flags or launching experiments, to your production servers. If left unspecified, the default interval is set to 60 minutes. Additionally, we offer a streaming mode that utilizes server-sent events (SSE) to allow the SDK to automatically receive and apply new configurations in real-time, without any delays.
default_timeout	Specifies the timeout for network requests from the SDK that are not overriden by method-specific timeouts. The default value is 10 seconds. Set the value to 30 seconds or more if you do not have a stable connection. Some methods have additional parameters for method-specific timeouts, but if you do not specify them explicitly, this default value is used.
tracking_interval	Specifies the interval for tracking requests. All visitors who were evaluated for any feature flag or had data flushed will be included in this tracking request, which is performed once per interval. The minimum value is 100ms and the maximum value is 1s, which is also the default value.
verbose_mode	Boolean value (true or false) that turns on additional logging, including network requests and debug information. This field is deprecated and will be removed in SDK version 4.0.0. Use logging.SetLogLevel instead.
proxy_url	This sets the proxy host for all outgoing server calls made by the SDK.
environment	Environment from which a feature flag’s configuration is to be used. The value can be production, staging, development. If no value is specified, the default environment is production. For more information on managing environments, please refer to this article.

note

To learn more about client_id and client_secret, as well as instructions on how to obtain them, please refer to this article. It's worth noting that our Go SDK utilizes the Automation API and follows the OAuth 2.0 client credentials flow.

Initializing the Kameleoon Client

Once you have installed our SDK in your application, the first step is to initialize Kameleoon. All interactions with the SDK, such as triggering an experiment, are accomplished via the object (the Kameleoon client) created by using the NewClient() method. You can customize the behavior of the SDK (for example, the environment or the credentials) by providing a configuration object.

import (
    kameleoon "github.com/Kameleoon/client-go/v3"
)

// First option
config := &kameleoon.KameleoonClientConfig{
    Network: kameleoon.NetworkConfig{ // Optional
        ProxyURL:        "http://proxy-pass:1234/", // Optional
        DoTimeout:       10 * time.Second, // Optional
        ReadTimeout:     5 * time.Second, // Optional
        WriteTimeout:    5 * time.Second, // Optional
        MaxConnsPerHost: 10000, // Optional
    },
    ClientID:        "your-client-id", // This field is required. Please enter your client_id here.
    ClientSecret:    "your-client-secret", // This field is required. Please enter your client_secret here.
    TopLevelDomain:  "example.com", // This field is strictly recommended, otherwise you may have problems when using subdomains.
    RefreshInterval:  time.Hour, // Optional (60 minutes by default)
    TrackingInterval: time.Second, // Optional (1000 ms by default)
    Environment:     "staging", // Optional
    SessionDuration: 30 * time.Minute, // Optional (30 minutes by default)
}
client, err := KameleoonClientFactory.Create("your-project-sitecode", config)

// Second option
config, err := LoadConfig("/etc/kameleoon/client-go.yaml")
client, err := KameleoonClientFactory.Create("your-project-sitecode", config)
// Notice: in that case the config is loaded every time. In order to load config only once use `CreateFromFile` instead

// Third option
client, err := KameleoonClientFactory.CreateFromFile("your-project-sitecode", "/etc/kameleoon/client-go.yaml")

Activating a feature flag

Assigning a unique ID to a user

To assign a unique ID to a user, you can use the GetVisitorCode() method. If a visitor code doesn’t exist (from the request headers cookie), the method generates a random unique ID or uses a defaultVisitorCode that you would have generated. The ID is then set in a response headers cookie.

If you are using Kameleoon in Hybrid mode, calling the GetVisitorCode() method ensures that the unique ID (visitorCode) is shared between the application file (kameleoon.js) and the SDK.

Retrieving a flag configuration

To implement a feature flag in your code, you must first create a feature flag in your Kameleoon account.

To determine if a feature flag is active for a specific user, you need to retrieve its configuration. Use the GetFeatureVariationKey() or IsFeatureActive() method to retrieve the configuration based on the featureKey.

The IsFeatureActive() method can be used if you want to retrieve the configuration of a simple feature flag that has only an ON or OFF state, as opposed to more complex feature flags with multiple variations or targeting options.

The GetFeatureVariationKey() method retrieves the configuration of a feature experiment with several feature variations. You can use the method to get a variation key for a given user by providing the visitorCode and featureKey as mandatory arguments.

Feature flags can have associated variables that are used to customize their behavior. To retrieve these variables, use the GetFeatureVariationVariables() method after calling GetFeatureVariationKey(), as you will need to obtain the variationKey for the user.

note

To check if a feature flag is active, you only need to use one method. Choose isFeatureFlagActive if you simply want to know if a feature flag is on or off. For more complex scenarios, like dynamically changing the feature's behavior, use getFeatureFlagVariables.

Adding data points to target a user or filter / breakdown visits in reports

To target a user, ensure you’ve added relevant data points to their profile before retrieving the feature variation or checking if the flag is active. Use the AddData() method to add these data points to the user’s profile.

To retrieve data points that have been collected on other devices or to access past data points about a user (which would have been collected client-side if you are using Kameleoon in Hybrid mode), use the GetRemoteVisitorData() method. This method asynchronously fetches data from our servers. However, it is important you call GetRemoteVisitorData() before retrieving the variation or checking if the feature flag is active, as this data might be required to assign a user to a given variation of a feature flag.

To learn more about available targeting conditions, read our detailed article on the subject.

Additionally, the data points you add to the visitor profile will be available when analyzing your experiments, allowing you to filter and break down your results by factors like device and browser. Kameleoon Hybrid mode automatically collects a variety of data points on the client-side, making it easy to break down your results based on these pre-collected data points. See the complete list here.

If you need to track additional data points beyond what's automatically collected, you can use Kameleoon's Custom Data feature. Custom Data allows you to capture and analyze specific information relevant to your experiments. To ensure your results are accurate, it's recommended to filter out bots by using the userAgent data type. You can learn more about this here. Don't forget to call the flush() method to send the collected data to Kameleoon servers for analysis.

Tracking flag exposition and goal conversions

Kameleoon will automatically track visitors’ exposition to flags as soon as you call one of these methods:

• GetFeatureVariationKey()
• GetFeatureVariable()
• IsFeatureActive()

When a user completes a desired action (for example, making a purchase), it counts as a conversion. To track conversions, you must use the TrackConversion() method, and provide the visitorCode and goalId parameters.

Sending events to analytics solutions

To track conversions and send exposure events to your customer analytics solution, you must first implement Kameleoon in Hybrid mode. Then, use the GetEngineTrackingCode() method.

The GetEngineTrackingCode method retrieves the unique tracking code required to send exposure events to your analytics solution. Using this method allows you to record events and send them to your desired analytics platform.

Targeting conditions

The Kameleoon SDKs support a variety of predefined targeting conditions that you can use to target users in your campaigns. For the list of conditions supported by this SDK, see use visit history to target users.

You can also use your own external data to target users.

Logging

The SDK generates logs to reflect various internal processes and issues.

Log levels

The SDK supports configuring limiting logging by a log level.

import (
    "development.kameleoon.net/sdk/go-sdk/v3/logging"
)

// The `NONE` log level allows no logging.
logging.SetLogLevel(logging.NONE)

// The `ERROR` log level allows to log only issues that may affect the SDK's main behaviour.
logging.SetLogLevel(logging.ERROR)

// The `WARNING` log level allows to log issues which may require an attention.
// It extends the `ERROR` log level.
// The `WARNING` log level is a default log level.
logging.SetLogLevel(logging.WARNING)

//The `INFO` log level allows to log general information on the SDK's internal processes.
// It extends the `WARNING` log level.
logging.SetLogLevel(logging.INFO)

// The `DEBUG` log level allows to log extra information on the SDK's internal processes.
// It extends the `INFO` log level.
logging.SetLogLevel(logging.DEBUG)

Custom handling of logs

The SDK writes its logs to the console output by default. This behaviour can be overridden.

note

Logging limiting by a log level is performed apart from the log handling logic.

import (
    "development.kameleoon.net/sdk/go-sdk/v3/logging"
    "github.com/sirupsen/logrus"
)

type CustomLogger struct {
}

func NewCustomLogger() logging.LoggerWithLevel {
    return &CustomLogger{}
}

func (dl CustomLogger) Log(level logging.LogLevel, message string) {
    switch level {
    case logging.NONE:
    case logging.ERROR:
        logrus.Error(message)
    case logging.WARNING:
        logrus.Warn(message)
    case logging.INFO:
        logrus.Info(message)
    case logging.DEBUG:
        logrus.Debug(message)
    }
}


// Log level filtering is applied separately from log handling logic.
// The custom logger will only accept logs that meet or exceed the specified log level.
// Ensure the log level is set correctly.
logging.SetLogLevel(logging.DEBUG) // Optional, defaults to `logging.WARNING`.
logging.SetLogger(NewCustomLogger())

Reference

This is a full reference documentation of the Go SDK.

Initialization

Create()

const siteCode = "sitecode"
config := &kameleoon.KameleoonClientConfig{
    // ...
}

client, err := KameleoonClientFactory.Create(siteCode, config)

Arguments

Name	Type	Description
siteCode	string	This is a unique key of the Kameleoon project you are using with the SDK. This field is mandatory.
cfg	*KameleoonClientConfig	Represents either the path to the SDK configuration file or the configuration object directly. If you provide the configuration object, it must contain the correct configuration keys. This field is mandatory.

Return value

Type	Description
KameleoonClient	An instance of the KameleoonClient that will be used to manage your experiments and feature flags.
error	An error occurred in the Create call. The error can be errs.SiteCodeIsEmpty or errs.ConfigCredentialsInvalid.

CreateFromFile()

const siteCode = "sitecode"
client, err := KameleoonClientFactory.CreateFromFile(siteCode, "/etc/kameleoon/client-go.yaml")

Arguments

Name	Type	Description
siteCode	string	A Kameleoon siteCode. This field is mandatory.
cfgPath	string	A path to the config file. The file is loaded if only the KameleoonClientFactory does not store a KameleoonClient instance with the specified siteCode. This field is mandatory.

Return value

Type	Description
KameleoonClient	An instance of the KameleoonClient that will be used to manage your experiments and feature flags.
error	An error occurred within Create. The error can be errs.SiteCodeIsEmpty or errs.ConfigCredentialsInvalid.

Forget()

The Forget method removes a KameleoonClient instance from the KameleoonClientFactory with the specified siteCode and frees resources used by the KameleoonClient instance. The KameleoonClient instance must not be used after calling the Forget method.

const siteCode = "sitecode"
KameleoonClientFactory.Forget(siteCode)

Arguments

Name	Type	Description
siteCode	string	The siteCode of the KameleoonClient instance to be removed from the KameleoonClientFactory. This field is mandatory.

WaitInit()

The initialization of the Kameleoon Client is not immediate, as it requires a server request to our CDN (Content Delivery Network) to retrieve the current configuration for all active experiments and feature flags.

To address this, the WaitInit method of the kameleoon.KameleoonClient class is available. This method allows you to wait until the KameleoonClient instance is ready for use.

err := client.WaitInit()
if err != nil {
    // Client wasn't initialized properly
    fmt.Println(err)
} else {
    // The SDK has been initialized, you can fetch a feature flag / experiment configuration here.
}

Return value

Type	Description
error	An error occurred during the initialization process.

Feature flags and variations

IsFeatureActive() / IsFeatureActiveWithTracking()

• 📨 Sends Tracking Data to Kameleoon (depending on the track parameter)

This method can be used if you want to retrieve the configuration of a simple feature flag, that has only a turn ON / OFF state, as opposed to more complex feature flags with multiple variations or targeting options. If your feature flag has variations and variables, you should use the GetFeatureVariationKey method.

It takes a visitorCode and featureKey as mandatory arguments to check if the feature flag is active for a given user.

If the user has not been associated with your feature flag before, the SDK returns a random boolean value (true if the user should have this feature or false if not). However, if the user has already been registered with this feature flag, the SDK detects the previous feature flag value.

note

It is important to set up proper error handling in your code to catch any potential exceptions that may occur, as shown in the code example.

If you specify a visitorCode, the IsFeatureActive method uses it as the unique visitor identifier, which is useful for cross-device experimentation. When you specify a visitorCode and set the isUniqueIdentifier parameter to true, the SDK links the flushed data with the visitor associated with the specified identifier.

note

The parameter isUniqueIdentifier is deprecated. Please use UniqueIdentifier instead.

The isUniqueIdentifier can also be useful in other edge-case scenarios, such as when you can't access the anonymous visitorCode that was originally assigned to the visitor, but you do have access to an internal ID that is connected to the anonymous visitor using session merging capabilities.

const featureKey = "new_checkout"

// Check if a Feature Flag is active (ON / OFF)
hasNewCheckout, err := client.IsFeatureActive(visitorCode, featureKey)
// disabling tracking
hasNewCheckout, err := client.IsFeatureActiveWithTracking(visitorCode, featureKey, false)

if err != nil {
    switch err.(type) {
    case *errs.VisitorCodeInvalid:
        // The provided visitor code is not valid. Trigger the old checkout for this visitor.
        hasNewCheckout = false
    case *errs.FeatureConfigNotFound:
        // The Feature Key is not yet in the configuration file that has been fetched by the SDK. Trigger the old checkout for this visitor.
        hasNewCheckout = false
    default:
        // Handle unexpected errors
        panic(err)
    }
}
if hasNewCheckout {
    // Implement new checkout code here
}

Arguments

Name	Type	Description
visitorCode	string	The user's unique identifier. This field is mandatory.
featureKey	string	The key of the feature you want to expose to a user. This field is mandatory.
isUniqueIdentifier (Deprecated)	bool	A parameter for specifying if the visitorCode is a unique identifier. If not provided, the default value is false. The field is optional.
track	bool	A parameter of the IsFeatureActiveWithTracking method to enable or disable tracking of the feature evaluation. IsFeatureActive(visitorCode, featureKey) is equivalent to IsFeatureActiveWithTracking(visitorCode, featureKey, true).

Return value

Type	Description
bool	Value of the feature flag that is registered for a given visitorCode.

Exceptions thrown

Type	Description
errs.FeatureConfigNotFound	This error indicates that the requested feature key could not be found in the internal configuration of the SDK. This typically occurs when the feature flag has not yet been retrieved by the SDK, which can happen if the SDK is in polling mode.
errs.VisitorCodeInvalid	This error is returned when the visitor code provided is invalid, meaning that it is either empty or its length exceeds 255 characters.

GetVariation()

• 📨 Sends Tracking Data to Kameleoon (depending on the Track parameter)

Retrieves the Variation assigned to a given visitor for a specific feature flag.

This method takes a visitorCode and featureKey as mandatory arguments. The Track argument is optional and defaults to true. It returns the assigned Variation for the visitor. If the visitor is not associated with any feature flag rules, the method returns the default Variation for the given feature flag.

note

The default variation refers to the variation assigned to a visitor when they do not match any predefined delivery rules for a feature flag. In other words, it is the fallback variation applied to all users who are not targeted by specific rules. It's represented as the variation in the "Then, for everyone else..." section in a management interface.

const featureKey = "new_checkout"

variation, err := client.GetVariation(visitorCode, featureKey)
// disabling tracking
variation, err := client.GetVariation(visitorCode, featureKey, kameleoon.NewGetVariationOptParams.Track(false))

if err != nil {
    // handle error
}

// Fetch a variable value for the assigned variation
title := variation.Variables["title"].Value

switch (variation.Key) {
    case "on":
        // Main variation key is selected for visitorCode
    case "alternative_variation":
        // Alternative variation key
    default:
        // Default variation key
}

Arguments

Name	Type	Description
visitorCode	string	Unique identifier of the user. This field is required.
featureKey	string	Key of the feature that you want to check the status of for the user. This field is required.
Track	bool	A parameter to enable or disable tracking of the feature evaluation. If not provided, the default value is true. The field is optional.

Return value

Type	Description
Variation	An assigned variation to a given visitor for a specific feature flag.

Exceptions thrown

Type	Description
errs.FeatureNotFound	Exception indicating that the requested feature key wasn't found in the internal configuration of the SDK. This usually means that the feature flag is not activated in the Kameleoon app (but code implementing the feature is already deployed on your application).
errs.FeatureEnvironmentDisabled	Exception indicating that feature flag is disabled for the visitor's current environment (for example, production, staging, or development).
errs.VisitorCodeInvalid	Exception indicating that the provided visitor code is not valid. It is empty or longer than 255 characters.

GetVariations()

• 📨 Sends Tracking Data to Kameleoon (depending on the Track parameter)

Retrieves a map of Variation objects assigned to a given visitor across all feature flags.

This method iterates over all available feature flags and returns the assigned Variation for each flag associated with the specified visitor. It takes visitorCode as a mandatory argument, while OnlyActive and Track are optional.

• If OnlyActive is set to true, the method GetVariations() will return feature flags variations provided the user is not bucketed with the off variation.
• The Track parameter controls whether or not the method will track the variation assignments. By default, it is set to true. If set to false, the tracking will be disabled.

The returned map consists of feature flag keys as keys and their corresponding Variation as values. If no variation is assigned for a feature flag, the method returns the default Variation for that flag.

Proper error handling should be implemented to manage potential exceptions.

note

The default variation refers to the variation assigned to a visitor when they do not match any predefined delivery rules for a feature flag. In other words, it is the fallback variation applied to all users who are not targeted by specific rules. It's represented as the variation in the "Then, for everyone else..." section in a management interface.

Arguments

Name	Type	Description
visitorCode (required)	string	Unique identifier of the user.
OnlyActive (optional)	boolean	An optional parameter indicating whether to return variations for active (true) or all (false) feature flags (Defaults to false).
Track (optional)	boolean	An optional parameter to enable or disable tracking of the feature evaluation (Defaults to true).

Return value

Type	Description
map[string]Variation	Map that contains the assigned Variation objects of the feature flags using the keys of the corresponding features.

Exceptions thrown

Type	Description
VisitorCodeInvalid	Exception indicating that the provided visitor code is not valid. It is either empty or longer than 255 characters.

variations, err := client.GetVariations(visitorCode)
// all active variations
variations, err := client.GetVariations(visitorCode, kameleoon.NewGetVariationsOptParams().OnlyActive(true))
// disable tracking
variations, err := client.GetVariations(visitorCode, kameleoon.NewGetVariationsOptParams().Track(false))

if err != nil {
    // handle error
}

Arguments

Name	Type	Description
visitorCode	string	Unique identifier of the user. This field is required.
OnlyActive	bool	An optional parameter indicating whether to return variations for active (true) or all (false) feature flags (Defaults to false).
Track	bool	An optional parameter to enable or disable tracking of the feature evaluation (Defaults to true).

Return value

Type	Description
map[string]Variation	Map that contains the assigned Variations of the feature flags using the keys of the corresponding features.

Exceptions thrown

Type	Description
VisitorCodeInvalid	Exception indicating that the provided visitor code is not valid. It is either empty or longer than 255 characters.

GetFeatureVariationKey()

• 📨 Sends Tracking Data to Kameleoon

note

This method is deprecated and will be removed in SDK version 4.0.0. Use GetVariation() instead.

This method retrieves the configuration of a feature experiment with several feature variations. You can use it to get a variation key for a given user by providing the visitorCode and featureKey as mandatory arguments.

If the user has never been associated with the feature flag, the SDK returns a variation key randomly, following the feature flag rules. If the user is already registered with the feature flag, the SDK detects the previous variation key value. If the user doesn't match any of the rules, the default value defined in Kameleoon's feature flag delivery rules will be returned. It's important to note that the default value may not be a variation key, but a boolean value or another data type, depending on the feature flag configuration.

note

Don't forget to handle potential exceptions with proper error handling in your code. Check out the example code for guidance.

If you specify a visitorCode, the GetFeatureVariationKey method uses it as the unique visitor identifier, which is useful for cross-device experimentation. When you specify a visitorCode and set the isUniqueIdentifier parameter to true, the SDK links the flushed data with the visitor associated with the specified identifier.

note

The parameter isUniqueIdentifier is deprecated. Please use UniqueIdentifier instead.

The isUniqueIdentifier can also be useful in other edge-case scenarios, such as when you can't access the anonymous visitorCode that was originally assigned to the visitor, but you do have access to an internal ID that is connected to the anonymous visitor using session merging capabilities.

// Feature Experiment with variations
const variationKey = ""

if variationKey, err := s.client.GetFeatureVariationKey(visitorCode, featureKey); err == nil {
    switch variationKey {
    case "variation 1":
        // The visitor has been bucketed with variation 1 key
    case "variation 2":
        // The visitor has been bucketed with variation 2 key
    default:
        //The visitor has been bucketed with the default variation or is part of the unallocated traffic sample
    }
} else {
    // An error occurred, the feature flag key has not been found in the current configuration fetched by the SDK
}

Arguments

Name	Type	Description
visitorCode	string	The user's unique identifier. This field is mandatory.
featureKey	string	The key of the feature you want to expose to a user. This field is mandatory.
isUniqueIdentifier (Deprecated)	bool	A parameter for specifying if the visitorCode is a unique identifier. If not provided, the default value is false. The field is optional.

Return value

Type	Description
string	Variation key of the feature flag that is registered for a given visitorCode.

Exceptions thrown

Type	Description
errs.FeatureConfigNotFound	This error indicates that the requested feature key could not be found in the internal configuration of the SDK. This typically occurs when the feature flag has not yet been retrieved by the SDK, which can happen if the SDK is in polling mode.
errs.VisitorCodeInvalid	This error is returned when the visitor code provided is invalid, meaning that it is either empty or its length exceeds 255 characters.
errs.FeatureEnvironmentDisabled	This error indicates that the feature flag is disabled for the current environment.

GetActiveFeatureListForVisitor()

The GetActiveFeatureListForVisitor() method takes a visitorCode parameter. When you call this method with a specific visitorCode, the method returns a list of feature flag keys that are currently available for that visitorCode.

Don't forget to handle potential exceptions with proper error handling in your code. For example, see the following code:

note

This method is deprecated and will be removed in SDK version 4.0.0. Use GetActiveFeatures() instead.

arrayFeatureFlagKeys, err := client.GetActiveFeatureListForVisitor(visitorCode)

Arguments

Name	Type	Description
visitorCode	string	The user's unique identifier. This field is mandatory.

Return value

Type	Description
[]string	List of feature flag keys that are active for a specific visitorCode.

Exceptions thrown

Type	Description
errs.VisitorCodeInvalid	This error is returned when the visitor code provided is invalid, meaning that it is either empty or its length exceeds 255 characters.

GetActiveFeatures()

note

This method is deprecated and will be removed in SDK version 4.0.0. Use GetVariations() instead.

The GetActiveFeatures() method retrieves information about the active feature flags that are available for the specified visitor code.

Don't forget to handle potential exceptions with proper error handling in your code. For example, see the following code:

activeFeatures, err := client.GetActiveFeatures(visitorCode)

Arguments

Name	Type	Description
visitorCode	string	The user's unique identifier. This field is mandatory.

Return value

Type	Description
map[string]types.Variation	Map that contains the assigned variations of the active features using the active feature IDs as keys.

Exceptions thrown

Type	Description
errs.VisitorCodeInvalid	This error is returned when the visitor code provided is invalid, meaning that it is either empty or its length exceeds 255 characters.

GetFeatureList()

To obtain a list of feature flag keys that are currently available for use with the SDK, you need to call the GetFeatureList() method.

If you specify a visitorCode, the TrackConversion method uses it as the unique visitor identifier, which is useful for cross-device experimentation. When you specify a visitorCode and set the isUniqueIdentifier parameter to true, the SDK links the flushed data with the visitor associated with the specified identifier.

note

The isUniqueIdentifier can also be useful in other scenarios, such as when you can't access the anonymous visitorCode that was originally assigned to the visitor, but you do have access to an internal ID that is connected to the anonymous visitor using session merging capabilities.

arrayFeatureKeys := client.GetFeatureList()

Return value

Type	Description
[]string	List of feature flag keys

Variables

GetFeatureVariable()

• 📨 Sends Tracking Data to Kameleoon

note

This method is deprecated and will be removed in SDK version 4.0.0. Use GetVariation() instead.

To get a feature variable of a variation key associated with a user, call the GetFeatureVariable() method of our SDK.

This method takes a visitorCode, featureKey and variableKey as mandatory arguments to get a variable of the variation key for a given user.

If the user has never been associated with the feature flag, the SDK returns a variable value of the variation key randomly, following the feature flag rules. If the user is already registered with the feature flag, the SDK detects the previous variation key value and return the variable value. If the user doesn't match any of the rules, the default value will be returned.

Don't forget to handle potential exceptions with proper error handling in your code. Check out the example code for guidance.

note

The parameter isUniqueIdentifier is deprecated. Please use UniqueIdentifier instead.

The isUniqueIdentifier can also be useful in other edge-case scenarios, such as when you can't access the anonymous visitorCode that was originally assigned to the visitor, but you do have access to an internal ID that is connected to the anonymous visitor using session merging capabilities.

visitorCode, err := client.GetVisitorCode(req, resp)
featureKey := "featureKey"
variableKey = "variableKey"

if variableValue, err := s.client.GetFeatureVariable(visitorCode, featureKey, variableKey); err == nil {
    // your custom code depending of variableValue
} else {
    // An error occurred, the feature flag has not been found in the current configuration fetched by the SDK.
}

Arguments

Name	Type	Description
visitorCode	string	The user's unique identifier. This field is mandatory.
featureKey	string	The key of the feature you want to expose to a user. This field is mandatory.
variableKey	string	The name of the variable for which you want to get a value. This field is mandatory.
isUniqueIdentifier (Deprecated)	bool	A parameter for specifying if the visitorCode is a unique identifier. If not provided, the default value is false. The field is optional.

Return value

Type	Description
interface{}	The value of a variable associated with a particular feature flag's variation that has been registered for a specific visitorCode. Possible types: bool, float64, string, map[string]interface{}

Exceptions thrown

Type	Description
errs.FeatureConfigNotFound	This error indicates that the requested feature key could not be found in the internal configuration of the SDK. This typically occurs when the feature flag has not yet been retrieved by the SDK, which can happen if the SDK is in polling mode.
errs.VisitorCodeInvalid	This error is returned when the visitor code provided is invalid, meaning that it is either empty or its length exceeds 255 characters.
errs.FeatureVariationNotFound	This error indicates that the requested variation ID could not be found in the internal configuration of the SDK. This typically occurs when the feature flag has not yet been retrieved by the SDK, which can happen if the SDK is in polling mode.
errs.FeatureVariableNotFound	This error indicates that the requested variable key has not been found. Check that the variable's key defined in the Kameleoon Platform matches the one in your code.
errs.FeatureEnvironmentDisabled	This error indicates that the feature flag is disabled for the current environment.

GetFeatureVariationVariables()

note

This method is deprecated and will be removed in SDK version 4.0.0. Use GetVariation() instead.

To retrieve all variables associated with a feature flag, you need to call the GetFeatureVariationVariables method. This method requires you to provide two mandatory arguments: featureKey and variationKey. The method returns the data with the object type, as defined in the Kameleoon Platform.

Don't forget to handle potential exceptions with proper error handling in your code. Check out the example code for guidance.

featureKey := "test_feature_variables"
variationKey := "on"

if allVariables, err := s.client.GetFeatureVariationVariables(featureKey, variationKey); err == nil {
    // your custom code
} else {
    // An error occurred, the feature flag or variation doesn't exist in the client configuration
}

Arguments

Name	Type	Description
featureKey	string	The key of the feature flag you want to obtain. This field is mandatory.
variationKey	string	The key of the variation you want to obtain. This field is mandatory.

Return value

Type	Description
map[string]interface{}	Data associated with this feature flag and variation. Possible values: string, bool, float64 or map[string]interface{} (depending on the type defined in the Kameleoon Platform).

Exceptions thrown

Type	Description
errs.FeatureConfigNotFound	This error indicates that the requested feature key could not be found in the internal configuration of the SDK. This typically occurs when the feature flag has not yet been retrieved by the SDK, which can happen if the SDK is in polling mode.
errs.FeatureVariationNotFound	This error indicates that the requested variation key could not be found in the internal configuration of the SDK. This typically occurs when the feature flag has not yet been retrieved by the SDK, which can happen if the SDK is in polling mode.
errs.FeatureEnvironmentDisabled	This error indicates that the feature flag is disabled for the current environment.

Visitor data

GetVisitorCode()

note

This method was previously named ObtainVisitorCode, which was removed in SDK version 3.0.0.

visitorCode, err := client.GetVisitorCode(req, resp)

visitorCode, err := client.GetVisitorCode(req, resp, "defaultCode12345")

To ensure user identification consistency, especially when using Kameleoon in hybrid mode with mixed front-end and back-end environments, you should call the GetVisitorCode() helper method to obtain the Kameleoon visitorCode for the current visitor. Here's how it works:

1. First, Kameleoon checks if there is a kameleoonVisitorCode cookie associated with the current HTTP request. If found, it will use this as the visitor identifier.

2. If no cookie is found, the method will either randomly generate a new identifier or use the defaultVisitorCode argument if it is passed. Using your own identifiers as visitor codes allows you to match Kameleoon visitors with your own users without additional look-ups in a matching table.

3. The server-side kameleoonVisitorCode cookie is then set with the identifier value via HTTP header, and the method returns the identifier value.

For more information, please refer to this article.

note

If you decide to provide your own User ID instead of using the Kameleoon generated visitorCode, it is your responsibility to ensure that the User ID is unique. The SDK does not check for uniqueness. It's important to note that the User ID you provide must not exceed 255 characters, as any excess characters will result in an exception being thrown.

Arguments

Name	Type	Description
request	*fasthttp.Request	The current fasthttp.Request object should be passed as the first parameter. This field is mandatory.
response	*fasthttp.Response	The current fasthttp.Response object should be passed as the second parameter. This field is mandatory.
defaultVisitorCode	string	This parameter will be used as the visitorCode if no existing kameleoonVisitorCode cookie is found on the request. This field is optional, and by default a random visitorCode will be generated.

Return value

Type	Description
(string, error)	A pair consisting of a visitorCode that will be associated with this particular user and an error. It should be used with most methods of the SDK.

Exceptions thrown

Error Message	Description
errs.VisitorCodeInvalid	This error is returned when the visitor code provided is invalid, meaning that it is either empty or its length exceeds 255 characters.

AddData()

To associate different data points with the current user, you can use the AddData() method. This method requires the visitorCode as its first parameter, and it also accepts several additional parameters. These additional parameters represent the various [Data types] that are allowed in Kameleoon.

import (
    "github.com/Kameleoon/client-go/v3/types"
)

client.AddData(visitorCode, types.NewBrowser(types.BrowserTypeChrome))

client.AddData(visitorCode,
    types.NewPageViewWithTitle("https://url.com", "title", 3),
    types.NewConversionWithRevenue(32, 10, false),
)

The AddData() method adds targeting data to storage so other methods can use the data to decide whether or not to target the current visitor.

The AddData() method does not return any value and does not interact with Kameleoon back-end servers on its own. Instead, all the declared data is saved for future transmission using the FlushAll()/FlushVisitor()/FlushVisitorInstantly() method. This approach reduces the number of server calls made, as the data is typically grouped into a single server call that is triggered the FlushAll()/FlushVisitor()/FlushVisitorInstantly(). Note that the TrackConversion method also sends out any previously associated data, just like the FlushAll()/FlushVisitor()/FlushVisitorInstantly() method. The same is true for GetFeatureFlagVariationKey and GetFeatureVariable methods if an experimentation rule is triggered.

tip

Each visitor can only have one instance of associated data for most data types. However, CustomData is an exception. Visitors can have one instance of associated CustomData per customDataIndex.

Arguments

Name	Type	Description
visitorCode	string	The user's unique identifier. This field is mandatory.
data	Data	Custom data types, separated by a comma.

Exceptions thrown

Type	Description
errs.VisitorCodeInvalid	This error is returned when the visitor code provided is invalid, meaning that it is either empty or its length exceeds 255 characters.

FlushAll() / FlushVisitor() / FlushVisitorInstantly()

• 📨 Sends Tracking Data to Kameleoon

Flush() takes the Kameleoon data associated with the visitor, then sends a tracking request along with all of the data that were added previously using the AddData() method, that has not yet been sent when calling one of these methods. Flush()/FlushVisitor()/FlushVisitorInstantly() is non-blocking as the server call is made asynchronously.

Flush() allows you to control when the data associated with a given visitorCode is sent to our servers. For instance, if you call AddData() a dozen times, it would be inefficient to send data to the server after each time AddData() is invoked, so all you have to do is call Flush() once at the end.

The FlushVisitor()/FlushVisitorInstantly() method uses visitorCode as the unique visitor identifier, which is useful for cross-device experimentation. When you specify a visitorCode and set the isUniqueIdentifier parameter to true, the SDK links the flushed data with the visitor associated with the specified identifier.

note

The parameter isUniqueIdentifier is deprecated. Please use UniqueIdentifier instead.

The isUniqueIdentifier can also be useful in other edge-case scenarios, such as when you can't access the anonymous visitorCode that was originally assigned to the visitor, but you do have access to an internal ID that is connected to the anonymous visitor using session merging capabilities.

import (
    "github.com/Kameleoon/client-go/v3/types"
)

visitorCode, err := client.GetVisitorCode(req, resp)

client.AddData(visitorCode, types.NewBrowser(types.BrowserTypeChrome))
client.AddData(visitorCode, types.NewConversionWithRevenue(32, 10, false))

client.FlushVisitor(visitorCode) // Interval tracking (most performant way for tracking)
client.FlushAll() // Interval tracking for all visitors' unsent data

client.FlushVisitorInstantly(visitorCode) // Instant tracking
client.FlushAll(true) // Instant tracking for all visitors' unsent data

// if you operate with unique ID
client.AddData(types.NewUniqueIdentifier(true))
client.FlushVisitor(visitorCode)

Arguments

Name	Type	Description
visitorCode	string	The user's unique identifier. This field is mandatory for FlushVisitor()/FlushVisitorInstantly().
isUniqueIdentifier (Deprecated)	bool	A parameter of the FlushVisitor method for specifying if the visitorCode is a unique identifier. If not provided, the default value is false. The field is optional.

Exceptions thrown

Type	Description
errs.VisitorCodeInvalid	This exception is raised when the visitor code provided is invalid, meaning that it is either empty or its length exceeds 255 characters.

Forget()

const siteCode = "sitecode"
KameleoonClientFactory.Forget(siteCode)

The Forget method removes a KameleoonClient instance from the KameleoonClientFactory with the specified siteCode and frees resources used by the KameleoonClient instance. The KameleoonClient instance must not be used after calling the Forget method.

Arguments

Name	Type	Description
siteCode	string	The siteCode of the KameleoonClient instance to be removed from the KameleoonClientFactory. This field is mandatory.

GetRemoteData()

The GetRemoteData() method retrieves external data stored on Kameleoon's remote server for the specified siteCode (specified in KameleoonClient constructor) according to a key passed as an argument. This key is typically the Kameleoon Visitor Code or your own User ID.

For example, you can use this method to retrieve user preferences, historical data, or any other data relevant to your application's logic. By storing this data on our highly scalable servers using our [Data API], you can efficiently manage massive amounts of data and retrieve it for each of your visitors or users.

The return value of the method is a JSON object that can be decoded using the json.Unmarshal() function. You can use this data to build advanced targeting segments for feature flags and experiments, or filter experiment and personalization reports based on any value stored in the retrieved data.

type Test1 struct {
    Value string `json:"some field to insert or update"`
}

remoteData, err := s.client.GetRemoteData("USER_ID") // uses default timeout
var test1 Test1
err = json.Unmarshal(remoteData, &test1)

remoteData, err := s.client.GetRemoteData("USER_ID", 1000)

note

Note that, since a server call is required, this mechanism is asynchronous.

We offer built-in integrations with Mixpanel, Segment, and GA4 to fetch external cohorts and utilize them in feature experiments. The key utilized in these integrations is either our own Visitor code or your User ID. You can refer to the sample code provided below to retrieve and utilize Mixpanel cohorts:

//Retrieve and use Mixpanel Cohorts
type Cohort struct {
    Id        string `json:"mixpanel_cohort_id"`
    Name      string `json:"mixpanel_cohort_name"`
    ProjectId string `json:"mixpanel_cohort_project_id"`
}

type MixPanelCohorts struct {
    Cohorts []Cohort `json:"mixpanel_cohorts"`
}

remoteData, err := s.client.GetRemoteData("USER_ID")
var mixPanel MixPanelCohorts
if err = json.Unmarshal(remoteData, &mixPanel); err == nil {
    cohorts := make([]string, len(mixPanel.Cohorts))
    for _, cohort := range mixPanel.Cohorts {
        cohorts = append(cohorts, cohort.Id)
    }
    client.AddData(visitorCode, types.NewCustomData(customDataIndex, cohorts...))
}

Arguments

Name	Type	Description
key	string	The key with which the data you are trying to retrieve is associated. This field is mandatory. This key is typically the Kameleoon Visitor Code or your own User ID.
timeout	int	The timeout parameter specifies the maximum amount of time the method can block to wait for a result, in milliseconds. This field is optional; if not provided, the method will use the default timeout value provided when initializing the SDK.

Return value

Type	Description
[]byte	This returns the information associated with retrieving data for a specific key. The result needs to be decoded using the json.Unmarshal() function.

Exceptions thrown

Type	Description
error	Error indicating that the request timed out.

GetRemoteVisitorData()

GetRemoteVisitorData() is an asynchronous method for retrieving Kameleoon Visits Data for the VisitorCode from the Kameleoon Data API. The method adds the data to storage for other methods to use when making targeting decisions.

Data obtained using this method plays an important role when you want to:

• use data collected from other devices.
• access a user's history, such as previously visited pages during past visits.
• use data that is only accessible on the client-side, like datalayer variables and goals that only convert on the front-end.

Read this article for a better understanding of possible use cases.

caution

By default, GetRemoteVisitorData() automatically retrieves the latest stored custom data with Scope=Visitor and attaches them to the visitor without the need to call the method AddData(). It is particularly useful for synchronizing custom data between multiple devices.

note

The parameter IsUniqueIdentifier is deprecated. Please use UniqueIdentifier instead.

The IsUniqueIdentifier can also be useful in other edge-case scenarios, such as when you can't access the anonymous visitorCode that was originally assigned to the visitor, but you do have access to an internal ID that is connected to the anonymous visitor using session merging capabilities.

Using parameters in GetRemoteVisitorData()

The GetRemoteVisitorData() method offers flexibility by allowing you to define various parameters when retrieving data on visitors. Whether you're targeting based on goals, experiments, or variations, the same approach applies across all data types.

For example, let's say you want to retrieve data on visitors who completed a goal "Order transaction". You can specify parameters within the GetRemoteVisitorData() method to refine your targeting. For instance, if you want to target only users who converted on the goal in their last five visits, you can set the PreviousVisitAmount parameter to 5 and Conversions to true.

The flexibility shown in this example is not limited to goal data. You can use parameters within the GetRemoteVisitorData() method to retrieve data on a variety of visitor behaviors.

Arguments of GetRemoteVisitorData

Name	Type	Description
visitorCode	string	The visitor code for which you want to retrieve the assigned data. This field is mandatory.
addData	bool	A boolean indicating whether the method should automatically add retrieved data for a visitor. This field is mandatory.
timeout	time.Duration	The timeout parameter specifies the maximum amount of time the method can block to wait for a result, in milliseconds. This field is optional; if not provided, the method will use the default timeout value provided when initializing the SDK.

Arguments of GetRemoteVisitorDataWithFilter

Name	Type	Description
visitorCode	string	The visitor code for which you want to retrieve the assigned data. This field is mandatory.
addData	bool	A boolean indicating whether the method should automatically add retrieved data for a visitor. This field is mandatory.
filter	types.RemoteVisitorDataFilter	Filter for specifying what data should be retrieved from visits. This field is mandatory.
timeout	time.Duration	The timeout parameter specifies the maximum amount of time the method can block to wait for a result, in milliseconds. This field is optional; if not provided, the method will use the default timeout value provided when initializing the SDK.

Arguments of GetRemoteVisitorDataWithOptParams

note

The GetRemoteVisitorDataWithOptParams method is deprecated. Please use GetRemoteVisitorDataWithFilter and UniqueIdentifier. instead

Name	Type	Description
visitorCode	string	The visitor code for which you want to retrieve the assigned data. This field is mandatory.
addData	bool	A boolean indicating whether the method should automatically add retrieved data for a visitor. This field is mandatory.
filter	types.RemoteVisitorDataFilter	Filter for specifying what data should be retrieved from visits. This field is mandatory.
params	kameleoon.RemoteVisitorDataOptParams	Optional parameters.

note

Here is the list of kameleoon.RemoteVisitorDataOptParams fields:

Name	Type	Description
IsUniqueIdentifier (optional) (Deprecated)	bool	A parameter for specifying if the visitorCode is a unique identifier. If not provided, the default value is false.
Timeout (optional)	time.Duration	The timeout parameter specifies the maximum amount of time the method can block to wait for a result, in milliseconds. This field is optional; if not provided, the method will use the default timeout value provided when initializing the SDK.

The default value of kameleoon.RemoteVisitorDataOptParams which is types.RemoteVisitorDataFilter{PreviousVisitAmount: 1, CurrentVisit: true, CustomData: true}, can be gotten with types.DefaultRemoteVisitorDataFilter() function.

note

Here is the list of available types.RemoteVisitorDataFilter options:

Name	Type	Description	Default
PreviousVisitAmount (optional)	int	Number of previous visits to retrieve data from. Number between 1 and 25	1
CurrentVisit (optional)	bool	If true, current visit data will be retrieved	true
CustomData (optional)	bool	If true, custom data will be retrieved.	true
PageViews (optional)	bool	If true, page data will be retrieved.	false
Geolocation (optional)	bool	If true, geolocation data will be retrieved.	false
Device (optional)	bool	If true, device data will be retrieved.	false
Browser (optional)	bool	If true, browser data will be retrieved.	false
OperatingSystem (optional)	bool	If true, operating system data will be retrieved.	false
Conversions (optional)	bool	If true, conversion data will be retrieved.	false
Experiments (optional)	bool	If true, experiment data will be retrieved.	false
Kcs (optional)	bool	If true, Kameleoon Conversion Score (KCS) will be retrieved. Requires the AI Predictive Targeting add-on	false

Return value

Type	Description
[]types.Data	A slice of data assigned to the given visitor.
error	An occurred error.

visitorCode := "visitorCode"
var visitorData []types.Data
var err error

// Visitor data will be fetched and automatically added for `visitorCode`
visitorData, err = client.GetRemoteVisitorData(visitorCode, true) // default timeout will be used
visitorData, err = client.GetRemoteVisitorData(visitorCode, true, time.Second) // 1000 milliseconds timeout

// If you only want to fetch data and add it yourself manually, set `addData` to `false`
visitorData, err = client.GetRemoteVisitorData(visitorCode, false) // default timeout will be used
visitorData, err = client.GetRemoteVisitorData(visitorCode, false, time.Second) // 1000 milliseconds timeout

// If you operate with unique ID
client.AddData(types.NewUniqueIdentifier(true))
visitorData, err = client.GetRemoteVisitorData(visitorCode, true)

// If you want to fetch custom list of data types
var visitorData = client.GetRemoteVisitorDataWithFilter(
    visitorCode,
    true,
    types.RemoteVisitorDataFilter{PreviousVisitAmount: 10, CustomData: true, Conversion: true, Experiments: true},
    // default timeout will be used
)
// or
var visitorData = client.GetRemoteVisitorDataWithFilter(
    visitorCode,
    true,
    types.RemoteVisitorDataFilter{PreviousVisitAmount: 10, CustomData: true, Conversion: true, Experiments: true},
    time.Second, // 1000 milliseconds timeout
)

GetVisitorWarehouseAudience()

Retrieves all audience data associated with the visitor in your data warehouse using the specified VisitorCode and WarehouseKey. The WarehouseKey is typically your internal user ID. The CustomDataIndex parameter corresponds to the Kameleoon custom data that Kameleoon uses to target your visitors. You can refer to the warehouse targeting documentation for additional details. The method returns a CustomData object, confirming that the data has been added to the visitor and is available for targeting purposes.

Arguments of GetVisitorWarehouseAudience

Name	Type	Description
VisitorCode	string	A unique visitor identification string, can't exceed 255 characters length.
CustomDataIndex	int	An integer representing the index of the custom data you want to use to target your BigQuery Audiences.
WarehouseKey	string	A unique key to identify the warehouse data (usually, your internal user ID). This field is optional.
Timeout	time.Duration	The timeout parameter specifies the maximum amount of time the method can block to wait for a result, in milliseconds. This field is optional; if not provided, the method will use the default timeout value provided when initializing the SDK. This field is optional.

Arguments of GetVisitorWarehouseAudienceWithOptParams

Name	Type	Description
visitorCode	string	A unique visitor identification string, can't exceed 255 characters length.
customDataIndex	int	An integer representing the index of the custom data you want to use to target your BigQuery Audiences.
params	kameleoon.VisitorWarehouseAudienceOptParams	Optional parameters.

note

Here is the list of kameleoon.VisitorWarehouseAudienceOptParams fields:

Name	Type	Description
WarehouseKey	string	A unique key to identify the warehouse data (usually, your internal user ID). This field is optional.
Timeout	time.Duration	The timeout parameter specifies the maximum amount of time the method can block to wait for a result, in milliseconds. This field is optional; if not provided, the method will use the default timeout value provided when [initializing the SDK]. This field is optional.

For GetVisitorWarehouseAudience method parameters are passed into the function as params of struct VisitorWarehouseAudienceParams to make some of them optional (WarehouseKey and Timeout).

For GetVisitorWarehouseAudienceWithOptParams method only optional parameters are passed into the function as params of struct VisitorWarehouseAudienceOptParams. :::

Return value

Type	Description
*types.CustomData	A CustomData instance confirming that the data has been added to the visitor.
error	An occurred error.

Example code

customData, err = client.GetVisitorWarehouseAudience(VisitorWarehouseAudienceParams{
    VisitorCode:     "visitorCode",
    CustomDataIndex: 10,
    WarehouseKey:    "warehouseKey", // optional
    Timeout:         5 * time.Second, // optional
})

customData, err = c.GetVisitorWarehouseAudienceWithOptParams(
    "visitorCode", 10, VisitorWarehouseAudienceOptParams{WarehouseKey: "warehouseKey", Timeout: 5 * time.Second})

SetLegalConsent()

You must use this method to specify whether the visitor has given legal consent to use personal data. Setting the legalConsent parameter to false limits the types of data that you can include in tracking requests. This helps you adhere to legal and regulatory requirements while responsibly managing visitor data. You can find more information on personal data in the consent management policy.

visitorCode, err := kameleoonClient.GetVisitorCode(req, resp)

err := kameleoonClient.SetLegalConsent(visitorCode, true, resp)

Arguments

Name	Type	Description
visitorCode	string	The user's unique identifier. This field is required.
consent	bool	A boolean value representing the legal consent status. true indicates the visitor has given legal consent, false indicates the visitor has never provided, or has withdrawn, legal consent. This field is required.
response	*fasthttp.Response	The HTTP response where values in the cookies will be adjusted based on the legal consent status. This field is optional.

Exceptions thrown

Type	Description
errs.VisitorCodeInvalid	This error is returned when the visitor code provided is invalid, meaning that it is either empty or its length exceeds 255 characters.

Goals and third-party analytics

TrackConversion()

• 📨 Sends Tracking Data to Kameleoon

This method is used to track conversions for any goal that has been set up in your Kameleoon account. To use this method, you must provide the visitorCode and goalID as mandatory arguments to track the conversion for a particular goal.

The TrackConversion() method should be called when the user has completed the action that you are tracking as a conversion. For example, if you are tracking purchases, you would call TrackConversion() when the user has completed the checkout process.

Additionally, you can pass a third argument revenue to the TrackConversionRevenue() method to track the revenue generated by the conversion.

Both methods don't return any value and are non-blocking as the server call is made asynchronously.

note

The parameter isUniqueIdentifier is deprecated. Please use UniqueIdentifier instead.

The isUniqueIdentifier can also be useful in other edge-case scenarios, such as when you can't access the anonymous visitorCode that was originally assigned to the visitor, but you do have access to an internal ID that is connected to the anonymous visitor using session merging capabilities.

import (
    "github.com/Kameleoon/client-go/v3/types"
)

const goalID = 83023

client.TrackConversion(visitorCode, goalID)

client.TrackConversionRevenue(visitorCode, goalID, 10.0)

// if you operate with unique ID
client.AddData(types.NewUniqueIdentifier(true))
client.TrackConversion(visitorCode, goalID)

Arguments

Name	Type	Description
visitorCode	string	The user's unique identifier. This field is mandatory.
goalId	int	The ID of the goal. This field is mandatory.
revenue	float64	A parameter of the TrackConversionRevenue method to specify the revenue of the conversion. TrackConversion(visitorCode, goalID) is equivalent to TrackConversionRevenue(visitorCode, goalID, 0.0).
isUniqueIdentifier (Deprecated)	bool	Specifies that the visitorCode is a unique identifier. If not provided, the default value is false. The field is optional.

Exceptions thrown

Type	Description
errs.VisitorCodeInvalid	This error is returned when the visitor code provided is invalid, meaning that it is either empty or its length exceeds 255 characters.

GetEngineTrackingCode()

Method GetEngineTrackingCode() returns the Kameleoon tracking code for the current visitor. Tracking code is built based the experiments that were triggered during the last 5 seconds.

Arguments

Name	Type	Description
visitorCode	string	The user's unique identifier. This field is mandatory.

Return value

Type	Description
string	JavaScript code to be inserted in your page

engineTrackingCode := kameleoonClient.GetEngineTrackingCode(visitorCode)
// Example of JS code that can be returned:
//
// window.kameleoonQueue = window.kameleoonQueue || [];
// window.kameleoonQueue.push(['Experiments.assignVariation', experiment1ID, variation1ID]);
// window.kameleoonQueue.push(['Experiments.trigger', experiment1ID, true]);
// window.kameleoonQueue.push(['Experiments.assignVariation', experiment2ID, variation2ID]);
// window.kameleoonQueue.push(['Experiments.trigger', experiment2ID, true]);
//
// Here, experiment1ID, experiment2ID and variation1ID, variation2ID represent
// the specific experiments and variations that the specified user has been assigned to

Events

OnUpdateConfiguration()

kameleoonClient.OnUpdateConfiguration(
    // configuration was updated
)

The OnUpdateConfiguration() method enables you to manage an event that occurs when there is an updated datafile configuration. This method takes a single input parameter: a function known as the handler. The handler that gets executed automatically whenever the configuration is updated through a real-time configuration event.

Arguments

Name	Type	Description
handler	func()	The handler that will be called when the configuration is updated using a real-time configuration event.

Data types

Browser

The browser data set stored here can be used to filter experiment and personalization reports by any value associated with it.

client.AddData(visitorCode, types.Browser(types.BrowserTypeChrome))

client.AddData(visitorCode, types.Browser(types.BrowserTypeSafari, 16.0))

NewBrowser

Name	Type	Description
browserType	BrowserType	List of browsers: CHROME, INTERNET_EXPLORER, FIREFOX, SAFARI, OPERA, OTHER. This field is mandatory.
version	...float32	Version of browser. This field is optional.

Conversion

The Conversion data set stored here can be used to filter experiment and personalization reports by any goal associated with it.

client.AddData(visitorCode, types.NewConversion(32, false))

client.AddData(visitorCode, types.NewConversionWithRevenue(32, 10, false))

NewConversion

Name	Type	Description
goalId	int	The ID of the goal. This field is mandatory.
negative	...bool	Defines if the revenue is positive or negative. This field is optional.

NewConversionWithRevenue

Name	Type	Description
goalId	int	The ID of the goal. This field is mandatory.
revenue	float64	Conversion revenue. This field is optional.
negative	...bool	Defines if the revenue is positive or negative. This field is optional.

Cookie

Cookie contains information about the cookie stored on the visitor's device.

note

Each visitor can only have one Cookie. Adding second Cookie overwrites the first one.

cookie := types.NewCookie(map[string]string{
  "k1": "v1",
  "k2": "v2",
})
client.AddData(visitorCode, cookie)

Name	Type	Description
cookies	map[string]string	A string object map consisting of cookie keys and values. This field is required.

Geolocation

Geolocation contains the visitor's geolocation details.

note

Each visitor can only have one Geolocation. Adding a second Geolocation overwrites the first one.

client.AddData(visitorCode, types.NewGeolocation("France", "Île-de-France", "Paris"))

client.AddData(visitorCode, types.NewGeolocationWithCoords(48.856667, 2.352222, "France", "Île-de-France", "Paris"))

Name	Type	Description
latitude	float64	The latitude of position of the visitor. Coordinate number represents decimal degrees. The field is optional.
longitude	float64	The longitude of position of the visitor. Coordinate number represents decimal degrees. The field is optional.
country	string	The country of the visitor. The field is required.
region	string	The region of the visitor. The field is optional.
city	string	The city of the visitor. The field is optional.
postalCode	string	The postal code of the visitor. The field is optional.

CustomData

Custom data is one of the most powerful features of the Kameleoon platform. They allow any kind of data to be easily associated with each visitor and used for many different purposes, such as:

• building advanced targeting segments for A/B tests and personalizations based on this data.
• filtering of experiment and personalization reports by any value stored in this data.

client.AddData(visitorCode, types.NewCustomData(11, "some value"))

client.AddData(visitorCode, types.NewCustomData(1, "first value", "second value"))

values := []string{"one value", "second value"}
client.AddData(visitorCode, types.NewCustomData(1, values...))

note

The index or ID of the custom data can be found in your Kameleoon account. It is important to note that this index starts at 0, which means that the first custom data you create for a given site will be assigned 0 as its ID, not 1.

NewCustomData

Name	Type	Description
id	int	The Index or unique ID of the custom data to be stored. This field is mandatory.
values	...string	The values of the custom data to be stored. This field is mandatory.

Device

The device data set stored here can be used to filter experiment and personalization reports by any value associated with it.

client.AddData(visitorCode, types.NewDevice(types.DeviceTypeDesktop))

NewDevice

Name	Type	Description
deviceType	DeviceType	List of devices: Phone, Tablet, Desktop. This field is mandatory.

OperatingSystem

OperatingSystem contains information about the operating system on the visitor's device.

note

Each visitor can only have one OperatingSystem. Adding a second OperatingSystem overwrites the first one.

client.AddData(visitorCode, types.NewOperatingSystem(types.OperatingSystemTypeWindows))

Name	Type	Description
type	types.OperatingSystemType	List of operating systems: Windows, Mac, iOS, Linux, Android and WindowsPhone. This field is required.

PageView

The pageview data set stored here can be used to filter experiment and personalization reports by any value associated with it.

client.AddData(visitorCode, types.NewPageView("https://url.com", 3))

client.AddData(visitorCode, types.NewPageViewWithTitle("https://url.com", "title", 3))

note

The index or ID of the referrer can be found in your Kameleoon account. It is important to note that this index starts at 0. This menas the first acquisition channel you create for a given site will be assigned 0 as its ID, not 1.

NewPageView

Name	Type	Description
url	string	The URL of the page viewed. This field is mandatory.
referrers	...int	The referrers of the viewed pages. This field is optional.

NewPageViewWithTitle

Name	Type	Description
url	string	The URL of the page viewed. This field is mandatory.
title	string	The title of the page viewed. This field is mandatory.
referrers	...int	The referrers of the viewed pages. This field is optional.

UserAgent

Server-side experiments are more vulnerable to bot traffic than client-side experiments. To address this, Kameleoon uses the IAB/ABC International Spiders and Bots List to identify known bots and spiders. Kameleoon also uses the UserAgent field to filter out bots and other unwanted traffic that could otherwise skew your conversion metrics. For more details, see the help article on bot filtering.

If you use internal bots, we suggest that you pass the value curl/8.0 of the userAgent to exclude them from our analytics.

client.AddData(visitorCode, types.NewUserAgent("visitor_user_agent"))

NewUserAgent

Name	Type	Description
value	string	The User-Agent value that will be sent with tracking requests. This field is mandatory.

UniqueIdentifier

If you don't add UniqueIdentifier for a visitor, visitorCode is used as the unique visitor identifier, which is useful for Cross-device experimentation. When you add UniqueIdentifier for a visitor, the SDK links the flushed data with the visitor associated with the specified identifier.

The UniqueIdentifier can also be useful in other edge-case scenarios, such as when you can't access the anonymous visitorCode that was originally assigned to the visitor, but you do have access to an internal ID that is connected to the anonymous visitor using session merging capabilities.

client.AddData(types.NewUniqueIdentifier(true))

NewUniqueIdentifier

Name	Type	Description
value	bool	Parameter for specifying if the visitor_code is a unique identifier. This field is mandatory.

Returned Types

Variation

Variation contains information about the assigned variation to the visitor (or the default variation, if no specific assignment exists).

Name	Type	Description
Key	string	The unique key identifying the variation.
VariationID	*int	The ID of the assigned variation (or nil if it's the default variation).
ExperimentID	*int	The ID of the experiment associated with the variation (or nil if default).
Variables	map[string]Variable	A map containing the variables of the assigned variation, keyed by variable names. This could be an empty collection if no variables are associated.

note

• The Variation object provides details about the assigned variation and its associated experiment, while the Variable object contains specific details about each variable within a variation.
• Ensure that your code handles the case where VariationID or ExperimentID may be nil, indicating a default variation.
• The Variables map might be empty if no variables are associated with the variation.

Example code

// Retrieving the variation key
var variationKey string = variation.Key

// Retrieving the variation id
var variationID *int = variation.VariationID

// Retrieving the experiment id
var experimentID *int = variation.ExperimentID

// Retrieving the variables map
var variables map[string]Variable = variation.Variables

Variable

Variable contains information about a variable associated with the assigned variation.

Name	Type	Description
Key	string	The unique key identifying the variable.
Type	string	The type of the variable. Possible values: BOOLEAN, NUMBER, STRING, JSON, JS, CSS.
Value	interface{}	The value of the variable, which can be of the following types: bool, int, float, string, map, array.

Example code

// Retrieving the variables map
var variables map[string]Variable = variation.Variables

// Variable type can be retrieved for further processing
var variableType string = variables["isDiscount"].Type

// Retrieving the variable value by key
var isDiscount bool = variables["isDiscount"].Value.(bool)

// Variable value can be of different types
var title string = variables["title"].Value.(string)