Category:Plinth Factory re-plinthed turntables

From Wikimedia Commons, the free media repository

Jump to navigation Jump to search

Media in category "Plinth Factory re-plinthed turntables"

The following 200 files are in this category, out of 236 total.

(previous page) (next page)

Connoisseur BD1 Kit disassembled (7054747089).jpg 1,024 × 768; 204 KB
Connoisseur BD1 Kit Replinth - B&O ST-L15 tonearm added (10664573605).jpg 1,024 × 768; 244 KB
Connoisseur BD1 Kit Replinth - Birds Eye Maple veneer added + Lacquer (9240043935).jpg 1,024 × 768; 242 KB
Connoisseur BD1 Kit Replinth - Birds Eye Maple veneer added + Lacquer (9242825582).jpg 1,024 × 768; 236 KB
Connoisseur BD1 Kit Replinth - Birds Eye Maple veneer added + Lacquer (9242826300).jpg 1,024 × 768; 226 KB
Connoisseur BD1 Kit Replinth - Birds Eye Maple veneer added + Lacquer (9242826632).jpg 1,024 × 768; 221 KB
Connoisseur BD1 Kit Replinth - in play (10669265353).jpg 1,024 × 768; 182 KB
Connoisseur BD1 Kit Replinth - in play (10669266783).jpg 1,024 × 768; 233 KB
Connoisseur BD1 Kit Replinth - Motor Detail (6908664052).gif 711 × 800; 20 KB
Connoisseur BD1 Kit Replinth - Plinth Drawing Side (6908663958).gif 1,192 × 377; 16 KB
Connoisseur BD1 Kit Replinth - Plinth Drawing Top (6908663914).gif 1,191 × 887; 44 KB
Connoisseur BD2 - DC Servo motor hack (12017612653).jpg 1,024 × 768; 92 KB
Connoisseur BD2 - DC Servo motor hack (12017930553).jpg 1,024 × 768; 106 KB
Denon DP-3500F - armboard (15005026970).jpg 2,448 × 3,264; 3.2 MB
Denon DP-3500F - motor unit (15004941009).jpg 3,264 × 2,448; 2.86 MB
Denon DP-3500F - motor unit (15005037960).jpg 3,264 × 2,448; 2.48 MB
Denon DP-3500F - Plinth (15005023390).jpg 3,264 × 2,448; 2.44 MB
Denon DP-3500F - Plinth (15005172967).jpg 3,264 × 2,448; 3.43 MB
Denon DP-3500F Micro-Seiki CF1 Supex 901 Super (15010594579).jpg 3,264 × 2,448; 1.21 MB
Denon DP-3500F Micro-Seiki CF1 Supex 901 Super (15010811318).jpg 3,264 × 2,448; 1.24 MB
First Run (back) - Connoisseur BD1 Kit Replinth (6915731652).jpg 768 × 1,024; 111 KB
First Run (front) - Connoisseur BD1 Kit Replinth (6915730830).jpg 1,024 × 768; 135 KB
First Run (front-side) - Connoisseur BD1 Kit Replinth (7061813181).jpg 1,024 × 768; 105 KB
First Run (top) - Connoisseur BD1 Kit Replinth (6915732108).jpg 1,024 × 768; 126 KB
Garrard 301 Plinth Build (4846502342).gif 640 × 613; 10 KB
Garrard 301 Plinth Build - a whole lotta cutting routing done (cropped) (4635631875).jpg 800 × 600; 92 KB
Garrard 301 Plinth Build - adding the brass cones (4845852023).jpg 2,048 × 1,536; 603 KB
Garrard 301 Plinth Build - adjustable support (4845853213).jpg 2,048 × 1,536; 775 KB
Garrard 301 Plinth build - Dustcover made... (5591833500).jpg 2,048 × 1,536; 923 KB
Garrard 301 Plinth Build - first coat of 2K clearcoat (4687195569).jpg 640 × 480; 58 KB
Garrard 301 Plinth Build - first plug-in (4845852641).jpg 1,536 × 2,048; 825 KB
Garrard 301 Plinth Build - fixing the brass cones with some isolation (4845851549).jpg 2,048 × 1,536; 545 KB
Garrard 301 Plinth Build - Fly in my finish grrrr (4692267875).jpg 640 × 480; 54 KB
Garrard 301 Plinth Build - Grain filling (4692901308).jpg 800 × 600; 99 KB
Garrard 301 Plinth Build - grrrrr (4714484056).jpg 640 × 480; 85 KB
Garrard 301 Plinth Build - not finished yet but getting there (4840538147).jpg 2,048 × 1,536; 1.17 MB
Garrard 301 Plinth Build - Playing tunes (4846473668).jpg 2,048 × 1,536; 648 KB
Garrard 301 Plinth Build - Tonearm base attached and inserts put in for the turntable (4841075322).jpg 2,048 × 1,536; 794 KB
Garrard 301 Plinth Build - Veneering (4659420603).jpg 800 × 600; 47 KB
Garrard 301 Plinth Build - Veneering Done (4659420457).jpg 800 × 600; 40 KB
Garrard 301 Plinth Build 90% Cutting Done (4639598516).jpg 800 × 600; 117 KB
Garrard 301 Plinth Build checking Clearance Fit (4633118504).jpg 800 × 600; 105 KB
Garrard 301 Plinth Build dry Fit (4633118288).jpg 800 × 600; 94 KB
Garrard 301 Plinth Build Final Board Cut (4638989537).jpg 800 × 600; 89 KB
Garrard 301 Plinth Build first Cuts (4632521983).jpg 800 × 600; 113 KB
Garrard 301 Plinth Build first Lamination (4633118776).jpg 800 × 600; 98 KB
Garrard 301 Plinth Build first Lamination - Cut and testing clearances (4634412049).jpg 2,048 × 1,536; 938 KB
Garrard 301 Plinth Build French Walnut Veneer (4654949113).jpg 640 × 480; 26 KB
Garrard 301 Plinth Build marking Out (4633117732).jpg 800 × 600; 76 KB
Garrard 301 Plinth Build Ply Laminations Complete (4655567360).jpg 640 × 480; 37 KB
Garrard 301 Plinth Build Ply Laminations Complete - arty shot -) (4654949213).jpg 640 × 480; 28 KB
Garrard 301 Plinth Build Testing Tonearm Base Height (4654949335).jpg 640 × 480; 56 KB
Garrard 301 with a SME 3012 tonearm (5185292362).jpg 2,048 × 1,536; 887 KB
Garrard 401 Plinth build - All layers cut (7406170744).jpg 3,264 × 2,448; 2.85 MB
Garrard 401 Plinth build - Checking for clearance (7406172130).jpg 3,264 × 2,448; 1.66 MB
Garrard 401 Plinth build - Checking for clearance (7406174010).jpg 3,264 × 2,448; 2.13 MB
Garrard 401 Plinth build - Dry fitting (7379470980).jpg 3,264 × 2,448; 2.61 MB
Garrard 401 Plinth build - Dry fitting layer one (7406176924).jpg 3,264 × 2,448; 1.89 MB
Garrard 401 Plinth build - First layer cut (7406175410).jpg 3,264 × 2,448; 1.59 MB
Garrard 401 Plinth build - Measuring (7406178550).jpg 3,264 × 2,448; 1.98 MB
Garrard 401 Plinth build - Motor Unit (7406168336).jpg 3,264 × 2,448; 2.74 MB
Garrard 401 Plinth build - Outside wrap Arm-boards cut (7379467662).jpg 3,264 × 2,448; 3.89 MB
Lenco B52 plinth revamp (8243320481).jpg 3,264 × 2,448; 2.66 MB
Lenco B52 plinth revamp - applying Danish Oil (8277969136).jpg 1,024 × 768; 206 KB
Lenco B52 plinth revamp - bare toplate (8263992879).jpg 1,024 × 768; 495 KB
Lenco B52 plinth revamp - black spraying done (8277406596).jpg 1,024 × 768; 139 KB
Lenco B52 plinth revamp - bottom (mounting points for the top-plate and the bottom board) (8263502624).jpg 768 × 1,024; 539 KB
Lenco B52 plinth revamp - Bottom Board Painted (8276355769).jpg 1,024 × 768; 134 KB
Lenco B52 plinth revamp - Decca FFSS tonearm in play (8628044310).jpg 1,200 × 1,600; 456 KB
Lenco B52 plinth revamp - Dry fit with base and feet (8263992465).jpg 1,024 × 768; 423 KB
Lenco B52 plinth revamp - Excel ES70s cartridge (8628044648).jpg 1,600 × 1,200; 366 KB
Lenco B52 plinth revamp - Finger-lift added to tonearm (8321015802).jpg 3,264 × 2,448; 771 KB
Lenco B52 plinth revamp - first play (8294211985).jpg 3,264 × 2,448; 1.95 MB
Lenco B52 plinth revamp - first play (8295264854).jpg 3,264 × 2,448; 2.46 MB
Lenco B52 plinth revamp - first play (8295270688).jpg 3,264 × 2,448; 2.24 MB
Lenco B52 plinth revamp - first play (8295271964).jpg 3,264 × 2,448; 1.76 MB
Lenco B52 plinth revamp - first play (cropped).jpg 2,329 × 1,281; 1.26 MB
Lenco B52 plinth revamp - first play.jpg 3,264 × 2,448; 2.95 MB
Lenco B52 plinth revamp - Fitting the new arm - template (8626936127).jpg 1,600 × 1,200; 332 KB
Lenco B52 plinth revamp - Fitting the new arm - template (8626936469).jpg 1,600 × 1,200; 374 KB
Lenco B52 plinth revamp - Fitting the new arm - template (8626936733).jpg 1,600 × 1,200; 363 KB
Lenco B52 plinth revamp - L70 heavy platter... (8265062194).jpg 1,024 × 768; 409 KB
Lenco B52 plinth revamp - Mayware Formula IV anti skate holder (8276396841).jpg 1,024 × 768; 117 KB
Lenco B52 plinth revamp - Mayware Formula IV anti skate holder (8276397137).jpg 1,024 × 768; 108 KB
Lenco B52 plinth revamp - Mayware Formula IV anti skate holder (8277454226).jpg 1,024 × 768; 128 KB
Lenco B52 plinth revamp - Mayware Formula IV anti skate holder (8277454330).jpg 1,024 × 768; 120 KB
Lenco B52 plinth revamp - Mayware Formula IV anti skate holder (8277454512).jpg 1,024 × 768; 203 KB
Lenco B52 plinth revamp - Plinth done (8277969862).jpg 3,264 × 2,448; 1.07 MB
Lenco B52 plinth revamp - Plinth done (8277970078).jpg 1,024 × 768; 185 KB
Lenco B52 plinth revamp - re-assembly (8293747189).jpg 3,264 × 2,448; 2.86 MB
Lenco B52 plinth revamp - Re-worked Decca FFSS tonearm (8628044916).jpg 1,600 × 1,200; 368 KB
Lenco B52 plinth revamp - Re-worked Decca FFSS tonearm (8628045250).jpg 1,600 × 1,200; 450 KB
Lenco B52 plinth revamp - Re-worked Decca FFSS tonearm (8628045664).jpg 1,600 × 1,200; 576 KB
Lenco B52 plinth revamp - setting up (8293745235).jpg 3,264 × 2,448; 2.65 MB
Lenco B52 plinth revamp - setting up on the no-plinth plinth (8294803966).jpg 3,264 × 2,448; 2.35 MB
Lenco B52 plinth revamp - spraying the bottom board and the top of the plinth (8269608727).jpg 1,024 × 768; 213 KB
Lenco B52 plinth revamp - top (strengthening the plinth) (8263502230).jpg 768 × 1,024; 506 KB
Lenco B52 plinth revamp - top plate (8247857352).jpg 3,264 × 2,448; 607 KB
Lenco B52 plinth revamp - Underside (8246790219).jpg 3,264 × 2,448; 814 KB
Meniscus test - Connoisseur BD1 Kit Replinth (7060493567).jpg 1,024 × 768; 76 KB
Moog's Garrard 401 - back with hinges (closed) (7935524402).jpg 1,024 × 768; 139 KB
Moog's Garrard 401 - back with hinges (open) (7935524224).jpg 1,024 × 768; 138 KB
Moog's Garrard 401 - box and pallet for shipping (7936709780).jpg 3,264 × 2,448; 2.97 MB
Moog's Garrard 401 - boxed for shipping (7936697004).jpg 3,264 × 2,448; 2.74 MB
Moog's Garrard 401 - boxing up (7936700926).jpg 3,264 × 2,448; 2.85 MB
Moog's Garrard 401 - dustcover (7931979370).jpg 1,024 × 555; 131 KB
Moog's Garrard 401 - Front with dustcover closed (7935524044).jpg 1,024 × 768; 193 KB
Moog's Garrard 401 - Front with dustcover open (7935523824).jpg 1,024 × 768; 177 KB
Moog's Garrard 401 - solid box with polystyrene (7936705510).jpg 3,264 × 2,448; 2.93 MB
Moog's Garrard 401 Plinth - All glued (7412342402).jpg 3,264 × 2,448; 2.34 MB
Moog's Garrard 401 Plinth - All glued (7412344676).jpg 3,264 × 2,448; 2.6 MB
Moog's Garrard 401 Plinth - fixings cross-scetion (7905274982).gif 1,024 × 553; 23 KB
Moog's Garrard 401 Plinth - in play with Grado cartridge (7893435252).jpg 1,024 × 768; 178 KB
Moog's Garrard 401 Plinth - Tonearm fitting (7814704198).jpg 3,264 × 2,448; 4.95 MB
Moog's Garrard 401 Plinth - two arms (7906931560).jpg 1,024 × 768; 126 KB
Moog's Garrard 401 Plinth - two arms (in play) (7906932182).jpg 1,024 × 768; 152 KB
Plinth Factory - 401 bevelling and rounding (12699934833).jpg 1,024 × 768; 503 KB
Plinth Factory - 401 bottom board cutout (with motor recess) (12745149095).jpg 1,024 × 768; 676 KB
Plinth Factory - 401 first fitting (12695612885).jpg 1,024 × 768; 507 KB
Plinth Factory - AR in Oak (13733154895).jpg 1,024 × 768; 244 KB
Plinth Factory - AR in Oak (13733156355).jpg 1,024 × 768; 236 KB
Plinth Factory - AR in Oak (13733156495).jpg 1,024 × 768; 206 KB
Plinth Factory - arm mount drilled (12745288303).jpg 1,024 × 768; 452 KB
Plinth Factory - clamps (12671027704).jpg 1,024 × 768; 564 KB
Plinth Factory - first fitting (12670677293).jpg 1,024 × 768; 472 KB
Plinth Factory - Garrard 401 - first fitting (13081932015).jpg 1,024 × 768; 276 KB
Plinth Factory - Garrard 401 - first fitting (13081933645).jpg 1,024 × 768; 250 KB
Plinth Factory - Garrard 401 - first fitting (13082050583).jpg 1,024 × 768; 182 KB
Plinth Factory - Garrard 401 - first fitting (13082234964).jpg 1,024 × 768; 272 KB
Plinth Factory - Oak getting finish (13608960533).jpg 3,264 × 2,448; 2.35 MB
Plinth Factory - shaped bottom board (12745291993).jpg 1,024 × 768; 530 KB
Plinth Factory - stacked and waiting (12582687094).jpg 1,024 × 768; 469 KB
Plinth Factory - TD124 (Oak) curving and rounding (12883344384).jpg 1,024 × 768; 168 KB
Plinth Factory - TD124 (Oak) curving and rounding (12883346114).jpg 1,024 × 768; 158 KB
Plinth Factory - TD124 (Oak) curving and rounding (12883347524).jpg 1,024 × 768; 155 KB
Plinth Factory - TD124 (piano) curving and rounding (12882921755).jpg 1,024 × 768; 180 KB
Plinth Factory - TD124 (piano) curving and rounding (12883343364).jpg 1,024 × 768; 175 KB
Plinth Factory - TD124 baseboard (13608919033).jpg 3,264 × 2,448; 2.52 MB
Plinth Factory - TD124 MkI - Black Oak (13984747792).jpg 1,027 × 768; 219 KB
Plinth Factory - TD124 MkI - Black Oak (13987958875).jpg 1,027 × 768; 211 KB
Plinth Factory - TD124 MkI - Black Oak (13988392964).jpg 1,027 × 768; 237 KB
Plinth Factory - TD124 MkI - Black Oak (13988393644).jpg 1,027 × 768; 219 KB
Plinth Factory - TD124 MkI - Piano black (13964952186).jpg 1,027 × 768; 236 KB
Plinth Factory - TD124 MkI - Piano black (13984849792).jpg 1,027 × 768; 243 KB
Plinth Factory - TD124 MkI - Piano black (13984850672).jpg 1,027 × 768; 214 KB
Plinth Factory - TD124 MkI - Piano black (13988064945).jpg 1,027 × 768; 213 KB
Plinth Factory - TD124 MkI - Piano black (13988496924).jpg 1,027 × 768; 216 KB
Plinth Factory - TD124 MkI - Piano finish plinth (13984805562).jpg 1,027 × 768; 275 KB
Plinth Factory - TD124 MkI - Piano finish plinth (13984838911).jpg 3,264 × 2,448; 2.43 MB
Plinth Factory - TD124 MkI - Piano finish plinth (13988013835).jpg 1,027 × 768; 231 KB
Plinth Factory - TD124 MkI - Piano finish plinth (13988443474).jpg 1,027 × 768; 259 KB
Plinth Factory - TD124 plinth back from the painters (13473645735).jpg 1,024 × 768; 322 KB
Plinth Factory - TD124 plinth back from the painters (13473647855).jpg 1,024 × 768; 322 KB
Plinth Factory - TD124 plinth back from the painters (13473752143).jpg 1,024 × 768; 314 KB
Plinth Factory - TD124's getting some fitting (12796970303).jpg 1,024 × 768; 203 KB
Plinth Factory - Thorens TD124 MkI - Parts (13880464875).jpg 1,346 × 1,051; 371 KB
Plinth Factory - Thorens TD124 MkI - reassembly (13880463435).jpg 1,346 × 1,051; 344 KB
Plinth Factory - Thorens TD124 MkI - reassembly (13880513583).jpg 1,346 × 1,051; 308 KB
Plinth Factory - Thorens TD124 MkI - Servicing (13880462655).jpg 1,346 × 1,051; 383 KB
Plinth Factory - Thorens TD124 MkII in Oak (13700948135).jpg 3,264 × 2,448; 2.38 MB
Plinth Factory - Thorens TD124 MkII in Oak (13700950273).jpg 2,448 × 3,264; 2.44 MB
Plinth Factory - top and bottom edges done (12745603174).jpg 1,024 × 768; 472 KB
Plinth Factory - veneering (12582343643).jpg 768 × 1,024; 450 KB
SABC Technics SP10 plinth (6133521606).jpg 2,048 × 1,536; 860 KB
SABC Technics SP10 plinth material (6132976345).jpg 2,048 × 1,536; 844 KB
SABC Technics SP10 plinth method (6132972003).jpg 2,048 × 1,536; 849 KB
Technics SP-10 Mk2 Plinth Build - adding first coat of finish (6620388963).jpg 800 × 482; 90 KB
Technics SP-10 Mk2 Plinth Build - armboard cut and tonearm base fitted (6646933429).jpg 3,264 × 1,968; 1.64 MB
Technics SP-10 Mk2 Plinth Build - Armboards (6600066879).jpg 3,264 × 1,968; 2.74 MB
Technics SP-10 Mk2 Plinth Build - Cross section (6651600795).jpg 800 × 480; 27 KB
Technics SP-10 Mk2 Plinth Build - cross-section (6565608225).jpg 1,200 × 724; 148 KB
Technics SP-10 Mk2 Plinth Build - dry fit size (6585450057).jpg 3,264 × 1,968; 1.86 MB
Technics SP-10 Mk2 Plinth Build - final topcoat (6639756963).jpg 3,264 × 1,968; 3.05 MB
Technics SP-10 Mk2 Plinth Build - Glue-up (6582512627).jpg 3,264 × 1,968; 1.79 MB
Technics SP-10 Mk2 Plinth Build - inserts (6565608821).jpg 724 × 1,200; 139 KB
Technics SP-10 Mk2 Plinth Build - inside recess (6565609325).jpg 724 × 1,200; 157 KB
Technics SP-10 Mk2 Plinth Build - Laminating the Armboard (6582523721).jpg 3,264 × 1,968; 2.15 MB
Technics SP-10 Mk2 Plinth Build - measuring the armboard for cutting (6646938275).jpg 3,264 × 1,968; 1.92 MB
Technics SP-10 Mk2 Plinth Build - measuring the armboard for cutting (6646944185).jpg 3,264 × 1,968; 1.91 MB
Technics SP-10 Mk2 Plinth Build - playing some toones (6646927979).jpg 3,264 × 1,968; 1.85 MB
Technics SP-10 Mk2 Plinth Build - playing some toones (6646935587).jpg 3,264 × 1,968; 1.63 MB
Technics SP-10 Mk2 Plinth Build - Raw armboard (6582518405).jpg 3,264 × 1,968; 1.85 MB
Technics SP-10 Mk2 Plinth Build - Routering the edges (6599798173).jpg 3,264 × 1,968; 2.38 MB
Technics SP-10 Mk2 Plinth Build - table and arm fitted (6646931165).jpg 3,264 × 1,968; 1.98 MB
Technics SP-10 Mk2 Plinth Build - table and arm fitted (6646941385).jpg 3,264 × 1,968; 2.11 MB
Technics SP-10 Mk2 Plinth Build - topside (6565610219).jpg 1,200 × 724; 123 KB
Technics SP-10 Mk2 Plinth Build - underside (6565609781).jpg 1,200 × 724; 128 KB
Technics SP-10 Mk2 Plinth Build - Wood coatings finished (6639759707).jpg 3,264 × 1,968; 2.2 MB
Thorens TD150 Mkii - Kiaat Plinth (9375006713).jpg 864 × 648; 53 KB
Thorens TD150 Mkii - Kiaat Plinth (9375006809).jpg 864 × 648; 58 KB
Thorens TD150 Mkii - Kiaat Plinth (9377789126).jpg 864 × 648; 59 KB
Thorens TD150 Mkii - Kiaat Plinth (9377789438).jpg 864 × 648; 59 KB
Thorens TD150 MkII Plinth - Danish Oiled (5981449323).jpg 2,048 × 1,536; 843 KB
Thorens TD150 MkII Plinth - setup and cleaning jig (5985473482).jpg 2,592 × 1,944; 1.36 MB
Thorens Td150 MkII re-plinth - 15 second bounce (5991289143).jpg 2,592 × 1,944; 1.47 MB
Thorens Td150 MkII re-plinth - Fitting wires (5991287561).jpg 2,592 × 1,944; 1.3 MB
Thorens Td150 MkII re-plinth - test play (sans plinth) (5991849628).jpg 2,592 × 1,944; 1.49 MB
Thorens Td150 MkII re-plinth - underside (5991848040).jpg 2,592 × 1,944; 1.55 MB
Thorens TD150 MkII replinth - -1 (6001932000).jpg 2,592 × 1,944; 308 KB
Thorens TD150 MkII replinth - -1 (6001932524).jpg 2,433 × 933; 354 KB

(previous page) (next page)

Retrieved from "https://commons.wikimedia.org/w/index.php?title=Category:Plinth_Factory_re-plinthed_turntables&oldid=364014733"