Tapping Machine
Drill MachinesMachine Clutch Cone: Export quality clutch system make with use of specially processor trimontly the clutch the liner clutch.
Head Made from close grained cast iron accurately bored, rimer ring and honed in perfect paralyze between the column and spindle. Easy clamping device fitted for locking it on the column.
Spindle : Made from EN8 to withstand distortion it is lanced and mounter on roller bearings.
Table Proportionately designed for rigidity and sufficient surface are is provided to hole down job. It can vertically prowered or can be vertically or raised by worm and rack raised by worm rack the slotting is provided to hold the heavy job.
Base The is of design and provided sufficient area for heavy jobs. Slots are provided for convenient holding.
Download Catalog Request Catalog
Order By Phone
Shipping Information Usually dispatched With In business days
+91-9124009247 OR Call Me Back
| Specification | TP12 | TP6 |
| Tapping Machine Capacity | 12 mm | 6 mm |
| Drilling Capacity | 8 mm | 3 mm |
| Spindle Travel / Table travel (6mm) | 75 mm | 60 mm |
| Distance Soindle to Colum | 14 0mm | 80 mm |
| Distance between chuck to base | 45 0mm | 190 mm |
| Distance between chuck to work table | 380 mm | Moveable |
| Size of base Plate - LxB | 480x350 mn | 370 x 250 mm |
| Sixe of Work Table LXB | 190x220 mm | 150 x 150 mm |
| Diamter of Column | 74mm | 47 nnm |
| V- Belt (Inside) | inside A-71 | - |
| V- Belt for Motor (Outside) | A-25 | A 36 |
| No. of Spindle Speeds | 3 | 3 |
| Forwards Speed Range | 350/620/1100 | 480 / 750 / 1400 |
| Reverse Speed Range | 420/745/1315 | 480 / 750 / 1401 |
| Motor Single phase or three phase | 0.75/ 1H.P 1400 R.P.M | 025 H,P 1440 R.P.M |
| Overall Height | 1245 mm | 650 mm |
| Overall Width | 370 mm. | 270 mm |
| Overall front to back | 600 mm | 540 mm |
| Weight Approx | 120 Kg. | 50 Kg. |
Tapping Machine Application
