1 / 37

Lecture 13 – Evolution of Cellular Systems

Lecture 13 – Evolution of Cellular Systems. Introduction 1st Generation cellular systems 2nd Generation cellular systems 3rd Generation cellular systems Ben Slimane [email protected]. Multiple Access/Multiplexing Methods. Frequency Division Multiple Access (FDMA)

alima
Download Presentation

Lecture 13 – Evolution of Cellular Systems

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Lecture 13 – Evolution of Cellular Systems • Introduction • 1st Generation cellular systems • 2nd Generation cellular systems • 3rd Generation cellular systems Ben Slimane [email protected]

  2. Multiple Access/Multiplexing Methods • Frequency Division Multiple Access (FDMA) • Time Division Multiple Access (TDMA) • Frequency-Hop Code Division Multiple Access (FH-CDMA) • Direct Sequence-Code Division Multiple Access (DS-CDMA)

  3. Cellular System Evolution

  4. 1G Cellular Systems • Appeared in late 1970s and deployed in early 1980s • All based on analog techniques • All used FDMA and FM modulation • Date rate: 8-10 kbps • Low system capacity (reuse N=7) • Large cells with omni-directional base station antennas

  5. 1G: NMT • 1981 Nordic Mobile Telephone • First generation analog technology • NMT450 and NMT900 • Free standard ready 1973, 1977 • Network open 1981 in Sweden and Norway • Based on FDMA • Channel bandwidth: 25/12.5 kHz • Total number of channels: 1999 • Analog traffic channel, digital control channel

  6. 1G: AMPS • Advanced Mobile Phone System (AMPS) • Appeared late 1970s, • First deployed in 1983, US, South America, China, and Australia • Based on FDMA • Channel bandwidth: 30 kHz • Total number of channels: 832 channels

  7. 1G: AMPS

  8. 1G versus 2G • Digital traffic channels – first-generation systems are almost purely analog; second-generation systems are digital • Encryption – all second generation systems provide encryption to prevent eavesdropping • Error detection and correction – second-generation digital traffic allows for detection and correction, giving clear voice reception • Channel access – second-generation systems allow channels to be dynamically shared by a number of users

  9. 2G Cellular Systems • Deployed in mid 1990s • 2G cellular systems all use digital voice coding and digital modulation • Can provide advanced call capabilities and a better system capacity • More users per unit bandwidth • Designed before the widespread of the Internet • Voice services and limited data services (SMS, FAX) • Data rate: on the order 10 kbps

  10. 2G cellular Systems

  11. 2G: GSM • Global Systems for Mobile Communications (GSM) • Based on TDMA • Channel bandwidth: 200 kHz • Traffic channels (slots) per RF channel: 8 • Maximum cell radius (R): 35 km • Frequency: 900/1800 MHz • Maximum vehicle speed (Vm): 250 km/hr • Maximum coding delay: approx. 20 ms • Maximum delay spread (m): 10 s

  12. Steps in Design of TDMA Timeslot

  13. GSM Frame Format • Transmission bit rate = 156.25/0.577 = 270.833 kbps

  14. Time Slot Fields • Trail bits: allow synchronization of transmissions from mobile units • Encrypted bits: encrypted data (ciphertext bits) • Training sequence • A known bit pattern • used to estimate the multi-path radio channel • Stealing bit: block contains data or ”stolen” for control • Guard bits • used to avoid overlapping with other bursts • Speech information • The actual information data

  15. GSM Signal Processing

  16. GSM Network Architecture

  17. Mobile Station • Mobile station communicates across Um interface (air interface) with base station transceiver in same cell as mobile unit • Mobile equipment (ME) – physical terminal, such as a telephone or PCS • ME includes radio transceiver, digital signal processors and subscriber identity module (SIM) • GSM subscriber units are generic until SIM is inserted • SIMs roam, not necessarily the subscriber devices

  18. Base Station Subsystem (BSS) • BSS consists of a base station controller and one or more base transceiver stations (BTS) • Each BTS defines a single cell • Includes radio antenna, radio transceiver and a link to a base station controller (BSC) • BSC reserves radio frequencies, manages handoff of mobile unit from one cell to another within BSS, and controls paging

  19. Network Subsystem (NS) • NS provides link between cellular network and public switched telecommunications networks • Controls handoffs between cells in different BSSs • Authenticates users and validates accounts • Enables worldwide roaming of mobile users • The Mobile Switching Center (MSC) is the central element of the NS • The MSC controls four databases

  20. The MSC Databases • Home location register (HLR) database – stores information about each subscriber that belongs to it • Visitor location register (VLR) database – maintains information about subscribers currently physically in the region • Authentication center database (AuC) – used for authentication activities, holds encryption keys • Equipment identity register database (EIR) – keeps track of the type of equipment that exists at the mobile station

  21. 2.5G • GPRS: General Packet Radio Service • Bitrates from 9.05 to 171.2 kbit/s • Multiple Time slots allocated to user • Link adaptations. • EDGE: Enhanced data rates for GSM evolution • Data rates up to 384 kbit/s • Two modulation schemes (GMSK, 8PSK) • Link adaptations

  22. Cellular CDMA • Frequency diversity – resolve multi-paths by means of the RAKE receiver • Multipath resistance – chipping codes used for CDMA exhibit low cross-correlation and low autocorrelation • Privacy – privacy is inherent since spread spectrum is obtained by use of noise-like signals • Graceful degradation – system only gradually degrades as more users access the system

  23. Cellular CDMA • Self-jamming – non-orthogonal codes create interference between users • Near-far problem – weak users jammed by strong users • Soft handoff – smooth handoff from one cell to the next • more complex than hard handoff • Frequency reuse of 1 • No frequency planning needed (N=1)

  24. Cellular CDMA • The RAKE receiver • Resolves multi-path components and combine them coherently • A diversity gain with order equals to the number of resolved paths is obtained • Soft Handoff • Mobile station temporarily connected to more than one base station simultaneously • Require more radio resources

  25. The RAKE Receiver • Spreading codes with low correlation properties allow the separation of the different radio paths • The RAKE receiver uses this property and locks on the different paths

  26. The RAKE Receiver

  27. Soft handoff in CDMA • When a mobile unit is in soft handover • Two codes are needed on the downlink • Only one code is needed on the uplink

  28. Spreading in Cellular CDMA

  29. 2G: IS-95

  30. 2G: IS-95 • Downlink • Pilot (0) – cell detection, channel estimation • Synchronization (32) – identification information • Paging (1-7) – messages to mobiles • Traffic (8-31, 33-63) – 55 traffic channels with data rate of 9600 bps • A unique channel for each user • Uplink • Access channels • Traffic channels

  31. ITU’s View of 3G • Voice quality comparable to the public switched telephone network • 144 kbps data rate available to users in high-speed motor vehicles over large areas • 384 kbps available to pedestrians standing or moving slowly over small areas • Support for 2.048 Mbps for office use • Symmetrical / asymmetrical data transmission rates • Support for both packet switched and circuit switched data services

  32. ITU’s View of 3G • An adaptive interface to the Internet to reflect efficiently the common asymmetry between inbound and outbound traffic • More efficient use of the available spectrum in general • Support for a wide variety of mobile equipment • Flexibility to allow the introduction of new services and technologies

  33. Alternative Interfaces

  34. CDMA Design Considerations • Bandwidth – limit channel usage to 5 MHz • Chip rate – depends on desired data rate, need for error control, and bandwidth limitations; 3 Mcps or more is reasonable • Multi-rate – advantage is that the system can flexibly support multiple simultaneous applications from a given user and can efficiently use available capacity by only providing the capacity required for each service

  35. UMTS • Wideband CDMA • Uplink 1920-1980 MHz • Downlink 2110-2170 MHz • Bandwidth 4,4-5 MHz • HSDPA: High Speed Downlink Packet Access • Data rates: 1,8, 3,6, 7,2 and 14,4 Mbit/s

  36. W-CDMA

  37. LTE • Long Term Evolution (LTE) • Advanced OFDM for downlink • Single carrier FDMA for uplink • Data rates exceeding 100 Mbps in the downlink with full mobility • Scalable bandwidth (1.25 to 20 MHz) • Frequency-reuse 1 • Multiple transmit and receive antennas

More Related