Brochure Marine Solutions 2015

2015
WÄRTSILÄ SOLUTIONS
FOR MARINE AND
OIL & GAS MARKETS
TABLE OF CONTENTS
Electrical & Automation 8
Integrated Solutions 10
Ballast Water Management 14
Compressors 20
Electrical & Automation 24

Automation 24
Direct Electric Heating 30
Electric Propulsion Systems 32
Power Drives 34
Switchboards 36
Engines and Generating Sets 38

Engines & Generating Sets 38
Dual-fuel Engines 38
Diesel Engines 44
Generating Sets 50
Engines Auxiliary Systems 62
Low-speed Generation X Engines 64
Low-speed RT-flex Engines 73
Low-speed Dual-fuel Engines 78
Exhaust Gas Cleaning 90

SOX Abatement 90
NOX Abatement 94
Inert Gas Systems 96
Oil & Gas Systems 102

Gas Recovery 102
Gas Cargo Handling Systems 108
LNG Solutions 111
Fuel Gas Handling 116
Oil Separation 120
Tank Control Systems 122
2
Propulsors & Gears 124
Gears 124
Propellers 132
Rudders 138
Thrusters 140
Waterjets 150
Pumps & Valves 156

Deepwell Pumps 156
Seawater Lift Pumps 159
Pump Room Systems 160
Firefighting Pumps 162
Valves 164
Seals, Bearings & Sterntubes 166

Sealing Solutions 167
Bearing Solutions 171
Stern Tube Solutions 173
Other Products 174
Ship Design 176

Merchant 178
Offshore & Special Vessels 180
Waste, Oil & Fresh Water Management 182

Fresh Water Generation 182
Oily Water Systems 184
Waste Water Processing 186
Vacuum System Technology 188
Wärtsilä Ship Power Worldwide 190
Licensees 197

Marine markets

Oil & gas markets
3
At Wärtsilä we strive constantly to do what is best for you. This includes
optimising the lifecycle value of your installations by offering precisely
what you need; a promise we can deliver on since we provide the marine
industry’s most complete portfolio of innovative products, integrated
solutions and global services.By prioritising operational efficiency,
environmental excellence, fuel flexibility and 24/7 support, we work with
you to find your shorter route to robust growth, greater profitability and
regulatory compliance. This is why today, every third vessel in the world
has a Wärtsilä solution onboard. We help our customers find their shorter
route to robust growth and bigger profits by focusing on operational
efficiency, environmental excellence, fuel flexibility and services. Let’s
work together to find the right route for you.
4
ENVIRONMENTAL EXCELLENCE
Many of our products are designed to have a direct environmental
benefit. By eliminating or reducing polluting discharges and emissions
from our customer’s processes, we ensure that they can continue to
operate in sensitive areas around the world.
We understand the regulatory environments in which our customers
operate. Our expertise ensures that the solution provided meets your
operating requirements while complying with all relevant environmental
legislation. Our years of experience and technology leadership provide a
strong basis of support for customers as they strive to maintain a safe and
clean operating environment.
5
FUEL FLEXIBILITY
Natural gas is the cleanest fossil fuel in the world. At Wärtsilä, we have
for several decades pioneered the development of gas technology.
With our gas-fuelled solutions, the combination of high efficiency and
low emissions is now unequalled in the marine and oil & gas markets.
Wärtsilä’s dual-fuel systems give you the chance to select the most
suitable fuel or fuels depending on factors such as availability and
price. Our dual-fuel (DF) engines are unique in the breadth of their
flexibility. They are able to run on natural gas, marine diesel oil, heavy
fuel oil, or even on bio fuels.
6
OPERATIONAL EFFICIENCY
At Wärtsilä we optimise a vessel’s efficiency by looking at the whole
picture, starting from the initial design. We study the vessel’s power
and propulsion systems, the integrated automation systems, and the
way that the vessel will be operated and maintained.
Our support also includes retrofit projects that reduce costs and risks,
minimise downtime, and improve efficiencies. These retrofits are the
product of excellent engineering capabilities, and are designed to extend
the lifecycle of the installation.
LIFECYCLE SUPPORT
Our global Wärtsilä Services business also serves to improve lifecycle
efficiency by preventing the unexpected, lessening the environmental
footprint, and optimising performance.
7
ELECTRICAL & AUTOMATION (E&A)
With the acquisition of L-3 Marine Systems International (L-3 MSI)

Wärtsilä broadens its offering within the area of E&A. L-3 MSI has
extensive experience in supplying automation, navigation and
electrical systems, power products, dynamic positioning technology,
as well as sonar and underwater communications technology for a
wide variety of vessel types. The company is well regarded for its
technology and systems integration capabilities in the cruise & ferry,
and large container vessel markets and with navies around the world.
8
The products SAM Electronics, Valmarine, Lyngsø Marine, Dynamic
Positioning & Control Systems, Jovyatlas Euroatlas, Elac Nautik, FUNA
and APSS, are well known and respected throughout the industry.
Adding these brands to Wärtsilä’s existing E&A offering makes
Wärtsilä the marine industry’s leading E&A provider that can provide
our customers with the latest technologies and greater opportunities
for meeting their present and future needs.
9
INTEGRATED SOLUTIONS
We at Wärtsilä understand your business drivers and we strive to

find the right solution for you that will accelerate the efficiency,
sustainability and profitability of your business. This commitment to
being our customers’ most valued business partner along with the
broadest portfolio of products, systems and project services has made
us the marine industry’s leading provider of integrated solutions.
A Wärtsilä integrated solution can include everything from
complete power generation solutions, electrical distribution and drives
systems, vessel automation systems, propulsion systems and fuel
10
handling systems to comprehensive project services such as project
management services, integration engineering services, on-site
support and overall commissioning services.
With this offering we are able to successfully support marine and
offshore projects throughout their lifecycle. Our integrated solutions
are designed to mitigate completion risks, optimise efficiency, and
minimise operating risks, allowing yards, owners and operators to
concentrate on their core business.
11
INTEGRATED SOLUTIONS
Project Development Services

We enable customer success by providing technical and commercial
expertise to the project development phase.
We partner with you to provide a unique combination of technical
and commercial expertise in the project development phase. Our
team of experts support you in with a wide range of services, such as
system architecture, feasibility studies, FEED support, financial and
marine lifecycle consultancy services.
12
Project Execution Services
We enable customer success by reducing risks related to the project
execution.
From transport and logistics services, subcontracting and system
integration engineering and system training to project management,
site management and commissioning, Wärtsilä’s experience and know
how stemming from hundreds of projects every year globally can help
to make sure that a newbuild project is completed efficiently and on
time.
Reducing risks during construction can improve the outcome of the
project and result in a quicker time to market for the vessel.
13
BALLAST WATER MANAGEMENT

SOLUTIONS FOR ALL SHIP TYPES
The IMO Ballast Water Convention was introduced in 2004 to address
the Control and Management of Ships’ Ballast Water and Sediments.
The regulation specifies that all sea going vessels greater than 400
gross registered tonnes need to install a Ballast Water Management
System.
In recognising that no one solution will be suitable across all ship
types, Wärtsilä is uniquely placed to offer owners & operators a choice
of Ballast Water Management Systems (BWMS). Wärtsilä also offer
a tailored installation package solution – AQUARIUS® READY. The
engineering and onboard preparations can be made in advance, and
the actual installation of the Wärtsilä AQUARIUS® BWMS can be
planned as and when required.
The two Wärtsilä AQUARIUS® BWMS are designed to use a
common filter module, and a different disinfection technology - medium
pressure Ultra Violet (UV), or electro chlorination (EC) technology.
14
The Wärtsilä AQUARIUS ® BWMS range offers the following
advantages:
zz Proven performance to meet D2
zz Low total cost of ownership
zz Fully automatic operation
zz Condition-based monitoring – optional functionality
zz Flexible upscaling and modular design
zz Suitable for both new build and retrofit projects
zz Technology choice
By virtue of Wärtsilä AQUARIUS® BWMS range modular design, the

system’s inherent flexibility allows application across the full range
of ship types and sizes, for both the new build and retrofit markets.
Wärtsilä offers customers a range of flexible supply options, from
equipment only, to a full ‘turnkey’ service covering all phases, from the
initial survey through to the project management, supply, installation,
and commissioning of the hardware, and continuing with lifecycle after
sales service and support.
15

Wärtsilä AQUARIUS® UV
Wärtsilä AQUARIUS® UV Ballast Water Management Systems (BWMS)
provide robust technology for the treatment of ballast water using
ultra-violet (UV) irradiation, across the full range of ship operating and
environmental conditions.
The Wärtsilä AQUARIUS® UV BWMS uses a simple two stage
process involving filtration and UV irradiation. During uptake, seawater
is first passed through a 40 micron backwashing screen to remove
particulate, sediment, zooplankton and phytoplankton. Disinfection of
the filtered sea water is then carried out using medium pressure UV
lamps, and controlled by the BWMS control system. Upon discharge,
the filter is by-passed but the ballast water is again disinfected with UV
treatment before safe discharge back into the sea.
The system has a modular design enabling it to be arranged to
suit conditions onboard the ship. The system can be designed and
16
Wärtsilä AQUARIUS® UV Capacity Total installed power
system (m3/h) (kW)
AQ-50-UV 0-50 19.0
AQ-80-UV 50-80 19.0
AQ-125-UV 80-125 19.0
AQ-180-UV 125-180 38.6
AQ-250-UV 180-250 40.1
AQ-300-UV 250-300 48.7
AQ-375-UV 300-375 47.3
AQ-430-UV 375-430 52.5
AQ-500-UV 430-500 62.6
AQ-550-UV 500-550 93.2
AQ-750-UV 550-750 93.2
AQ-850-UV 750-850 100.0

AQ-1000-UV 850-1000 100.0
Pressure drop
Normal operation 0.3 barg
Backwash set point 0.8 barg
supplied to treat ballast water covering the full range of ballast pump
sizes. There are 13 distinct Wärtsilä AQUARIUS® UV BWMS standard
modules available with capacities ranging from 50 m3/h to 1000 m3/h.
Capacities above 1000 m3/h up to 6000 m3/h are achieved by installing
multiple modules in parallel.
Available in two configurations for installation in safe environments
as well as an explosion proof version certified by DEKRA for hazardous
areas. The flexible scope of supply can include standard modules or
part kits that meet the individual requirements of our customers.
All Wärtsilä AQUARIUS® UV BWMS units have been granted IMO
Type Approval by The Ministry of Infrastructure and the Environment
of The Netherlands in accordance with Resolution MEPC.174(58) G8,
and have been tested to meet the D2 performance discharge standard.
USCG AMS acceptance has been granted in accordance with the
requirements of 33 CFR 151.2026 in all salinity ranges (fresh, brackish
& sea water)
17

Wärtsilä AQUARIUS® EC
Wärtsilä AQUARIUS® EC Ballast Water Management Systems (BWMS)
provide robust technology for the treatment of ballast water using in-
situ electro-chlorination, across the full range of ship operating and
environmental conditions.
The Wärtsilä AQUARIUS® EC BWMS uses a simple and efficient two
stage process involving filtration and electro-chlorination (EC). During
uptake, seawater is first passed through a 40 micron backwashing
screen filter to remove particulate, sediment, zooplankton and
phytoplankton. Disinfection of the filtered sea water is then carried
out using hypochlorite generated from the side stream EC process,
and controlled by the BWMS control system. Upon discharge, the
ballast water by-passes the filter and any residual active substance
is neutralised using sodium bisulfite, to ensure that the ballast water
is safe to discharge back to the sea in full compliance with MARPOL
requirements.
The system has a modular design enabling it to be arranged to
suit conditions onboard the ship. The system can be designed and
18
Wärtsilä AQUARIUS® EC Capacity Total Installed power (kW)
system (m3/h) Installed /Nominal
AQ-250-EC 0–250 24.3 / 22.1
AQ-300-EC 250–300 27.5 / 24.7
AQ-375-EC 300–375 31.8 / 28.2
AQ-430-EC 375–430 35.2 / 31.0
AQ-500-EC 430–500 41.1 / 35.2
AQ-550-EC 500–550 44.6 / 37.9
AQ-750-EC 550–750 57.6 / 47.9
AQ-850-EC 750–850 64.6 / 53.3
AQ-1000-EC 850–1000 76.6 / 62.0
AQ-1200-EC 1000–1200 89.3 / 71.3
AQ-1500-EC 1200–1500 110.0 / 88.2
AQ-2000-EC 1500–2000 153.6 / 120.0
AQ-2400-EC 2000–2400 202.2 / 148.6
AQ-3000-EC 2400–3000 270.2 / 197.5
AQ-3300-EC 3000–3300 328.6 / 237.8
AQ-3600-EC 3300–3600 365.1 / 258.7
Pressure drop
Normal operation 0.3 barg
Backwash set point 0.8 barg
supplied to treat ballast water covering the full range of ballast pump
sizes. There are 16 distinct Wärtsilä AQUARIUS® EC BWMS standard
modules available with capacities ranging from 250 m3/h to 3600 m3/h.
System capacities above 3600 m3/h are achieved by installing
multiple modules in parallel.
A flexible scope of supply includes standard modules or part kits to
meet the customer’s individual requirements.
The Wärtsilä AQUARIUS® EC BWMS received IMO Basic Approval
at MEPC 64, with Final Approval following at MEPC 65 in May 2013.
Type Approval will follow in 2013.
All Wärtsilä AQUARIUS® EC BWMS units have been granted IMO
Type Approval by The Ministry of Infrastructure and the Environment
of The Netherlands in accordance with Resolution MEPC.174(58) G8,
and have been tested to meet the D2 performance discharge standard.
USCG AMS acceptance has been granted in accordance with the
requirements of 33 CFR 151.2026.
19
COMPRESSORS

Wärtsilä Hamworthy Air & Gas Compressors
Wärtsilä is an established supplier of compressor and ejector systems
for the oil, gas and petrochemical industries. Our compressors can
be configured to suit a diverse range of high pressure applications
for both air and other gases: Argon, Biogas, Carbon Dioxide, Helium,
Heliox, Hydrogen, Methane, Natural Gas, Nitrogen (both compression
and generation).
We offer a range of options, from a basic compressor block to a
fully integrated compressor package solution for high pressure air or
gas. We are also able to incorporate ancillary items, such as nitrogen
generation and air/gas driers, into the scope of supply. The units are
designed to comply with European and other International standards
for a range of industries and applications.
We offer 2, 3 and 4 stage compressors with inlet pressures up to
7 bar g, and discharge pressures up to 350 bar g.
20

Wärtsilä Hamworthy CNG Compressors
We offer biogas or natural gas solutions for CNG refueling stations to
serve buses, trucks and other vehicles.
CNG is a more environmentally acceptable alternative than petrol,
diesel, or propane/LPG, and is significantly lower in price. Our offering
covers a range of options, from a basic compressor block to a fully
installed and commissioned CNG refueling station that includes the
compression module(s), cascade storage, priority panels and fuel
dispensers. The units are designed to comply with European and
International standards.
We provide systems for either ‘fast fill’ (temperature compensated)
or ‘timed fill’ with 200 or 250 bar g filling pressures. The gas composition
may be required to ensure correct compressor and material selection.
21
COMPRESSORS

Wärtsilä Hamworthy Rig Tensioning Compressors
Our rig tensioning compressors and heave compensation compressor
packages are fully integrated, lightweight, compact, and engineered
for the offshore environment.
The combination of a 4 stage compressor, dryer, and filtration
package with a contained cooling system, produces filtered and dry,
high pressure air or gas suitable for riser tensioning and other offshore
applications. The packages are designed to ensure that upgrades,
refurbishment, and servicing can be easily carried out. We also offer
high pressure nitrogen booster compressors, along with nitrogen
generation systems, for riser tensioning, motion compensation, drill
stream compensation and other applications.
These units can be supplied as integrated packages, fully
assembled, tested and ready for installation. The module also meets
the requirements of the major marine classification societies.
22
Wärtsilä Hamworthy Seismic Compressors
Our seismic compressors offer an integrated and compact solution to
your high-pressure needs.
Wärtsilä Hamworthy seismic compressors feature a low lift
concentric valve and generous inter-stage cooling to minimise the
amount of absorbed power. This results in very high overall efficiency.
Each machinery package includes a choice of drive, skid base and
control system, and is engineered to suit your seismic requirements.
The low unit noise and vibration improves reliability and reduces
interference with survey results. Flexibility in vessel utilisation is
available to contractors and operators via the containerised option.
Thanks to the easy access features and simple modular construction,
it enables low and easy maintenance. A multiple unit control system
provides local and remote operation of two or more compressors.
23
ELECTRICAL & AUTOMATION
Wärtsilä Control and Communication Center – 3C

Wärtsilä 3C represents the very latest in fully integrated vessel
control systems. It is a new way of thinking about ship controls and
communication, and will be a vital link between the bridge and the
ship’s automation, engines and propulsion control systems, and
combines the selection of individual navigation components in one
seamless system.
Designed in co-operation with experienced maritime professionals,
the Wärtsilä 3C ensures fluent control of the vessel with priority given
to situational awareness, safety, ergonomics and efficiency.
The 3C acts as a key enabler for the leveraging of energy
management and integrated navigational solutions into a single
powerful tool. As a result, advanced route planning becomes easier
with online data processing between the various systems, including
the ECDIS, optimizer, ecometer, power management, automation,
weather chart, Navtex, and the dynamic hull data.
24
AUTOMATION
The multifunction displays (widescreen TFT) present:

zz Radar including ARPA-Collision avoidance
zz Chartradar
zz ECDIS with automated route planning, weather chart, and online
NAVTEX information
zz ECOmeter (power management tool and advisory system
for optimum engine configurations to achieve reduced fuel
consumption and emissions)
zz Sensor health performance monitoring
zz Fast and easy access to navigation and automation data from any
multifunction display
zz Centralised dimming system
zz Centralised alarm system
zz Single action takeover
zz Advanced route planning including weather, safety and ship
performance criteria
zz Speed pilot (integration with PCS for programmed and planned
speed profiles)
zz Advanced predictor (for improved precision manoeuvres)
zz Optimiser (fleet management, vessel performance monitoring and
data collection for later analysis and feedback)
zz Common user interface with multiple options for further integration
i.e. cargo monitoring
25
Wärtsilä Integrated Automation Systems

Wärtsilä Integrated Automation System (WIAS) is delivered as part
of a Wärtsilä Electrical & Automation solution. The primary design
philosophy is reliability, safety, uptime, environmental aspects and
cost efficiency.
WIAS is a scalable, distributed and highly redundant system,
developed with emphasis on ensuring a uniform operating philosophy
and user interface for all Wärtsilä and third-party ship systems.
The system complies to requirements from all the major
classification societies, including offshore requirements like DP2, DP3
and NAUT-OSV. Best possible operational economy is emphasized
regarding use of fuel, personnel and building costs.
26
AUTOMATION
WIAS acts as main alarm system for the vessel, and it monitors
and controls other Wärtsilä products/systems as well as ship utility
systems like ballast, bilge, cargo, fuel, cooling etc.
The Ecometer function in WIAS estimates fuel consumption and
assist the operator on how to operate the vessel the optimal way, to
save fuel. The Ecometer is developed for Diesel Electric propulsion,
and based on Wärtsiläs expert knowledge on diesel electric propulsion
systems, and propeller and hull design. Using information from PMS,
propeller curves and hull design as well as data from ECDIS it is
possible to plan the route based on upon minimum fuel consumption.
Fuel consumption reports can be generated for the different
operating profiles (like steaming, DP and harbor). Saving fuel reduces
operating costs and saves the environment.
Wärtsilä Power Management System

The Power Management System controls power generation and power
distribution onboard the ship, to secure enough available power for
propulsion and manoeuvring . A complete Wärtsilä solution, including
PMS, ensures an optimal tuned system that will reduce the risk of bad
performance and blackouts.
PMS from Wärtsilä contains all standard functions like load
dependant start/stop, load sharing, synchronising, load shedding etc.
The system has several advanced options that will reduce distribution
losses, increase the energy availability and save space and installation
costs. For use in the offshore market, Wärtsilä PMS has passed
stringent tests like Hardware-in-loop (HIL) tests from third party
verification companies.
Wärtsilä PMS is fully integrated in WIAS.
Wärtsilä automation systems are designed to provide a high level of
safety, economy, reliability and availability through the whole life-cycle
of a vessel.
The design is based on use of Commercial off-the-shelf (COTS)
components and a high level of standardization. This reduces building
costs, secures high availability of spare parts and keeps maintenance
costs down. As process stations, Programmable Logic Controllers
(PLCs) are used, while Personal Computers (PCs) contain the graphical
user interface and storage of historical alarm and trend data.
The number of, and configuration/topology of the automation
system varies from delivery to delivery, and depends on ship type and
size, as well as customer requirements
27
Wärtsilä Propulsion Control Systems
The Wärtsilä Propulsion Control System (PCS) is a comprehensive
system of control devices, displays, indicators and modules designed
to suit all possible propulsion configurations of a modern ship.
The human interface of Wärtsilä PCS, ProTouch, is a complete
system of levers and touch screen interfaces, that responds to market
demands for modern and compact control devices.
Wärtsilä ProTouch has won the Red Dot Design Award, Best of the
Best 2013.
Benefits
zz Touch screen technology for user friendly, intuitive operation
zz Simple installation and commissioning
zz Compact, space saving design
zz Fully customizable to fit all propulsion products and layouts
zz Also available for retrofits
Wärtsilä Remote Monitoring and

Assistance System (RMS)
Wärtsilä RMS enables Wärtsilä service personnel and experts to
connect to Wärtsilä Integrated Automation System (WIAS) remotely.
RMS is based on VPN connection and depends on the ships internet
connection to shore (satellite communication provided by customer).
Wärtsilä can access both the HMI system and the PLCs, and will
28
AUTOMATION
have the same view as the operator onboard. The debug views that
show the programming sequences in the PLCs can also be accessed.
In addition to components of WIAS, other Wärtsilä equipment can also
be accessed.
Wärtsilä RMS makes it possible for Wärtsilä employees to assist the
crew in fault finding and corrections. Possible rectification will normally
not be performed from remote (even though this is possible), but the
crew can be guided to perform these.
The following table gives an overview of the operations and information
accessible from the remote system, provided that equipment is
delivered by Wärtsilä:
Wärtsilä equipment Monitor Configure
Operator stations (HMI) x x
Panels for Extension Alarm System (EAS) x
Network switches, process network x x
WIAS controllers (PLCs) x x
PMS controllers (PLCs) x x
Propulsion Control System x
Power Distribution / Switchboards x x
Power drives for propulsion x x
Generators x
Diesel Engines x x
29

Wärtsilä Direct Electric Heating
DEH is a cost efficient and environmentally sustainable flow assurance
method that replaces the use of chemicals.
The presence of wax and hydrates in subsea flow lines is a major
concern in the offshore industry. Wärtsilä DEH is based on using the
thermally insulated flow line as part of the electric circuit, and allowing
the electrical losses to heat the contents of the pipe.
Direct Electric Heating is today a mature technology that has
been used for more than 15 years in Norwegian and West African
installations. Wärtsilä has participated in the development of Wärtsilä
DEH since the nineties, and today undertakes the design and supply of
the complete topside Wärtsilä Direct Electric Heating package.
Wärtsilä Direct Electric Heating has been used for flow lines of up to
42 km, and with a power requirement of up to 12 MW.
The topside package comprises tailor made medium voltage
components that control the current in the flow line, convert the load
30
DIRECT ELECTRIC HEATING
Cooling system
Switchboard HVAC
Transformer
Reactor
Capacitor bank
Capacitor bank
Control cabinet
from single phase to a symmetrical 3-phase load, and compensate for

the low power factor. Wärtsilä delivers electric and optic protection
and control packages that have been specially developed for Wärtsilä
DEH. The Wärtsilä Direct Electric Heating package can be installed
in suitable indoor locations, or in outdoor locations within a steel or
aluminium module with HVAC or water cooling. Wärtsilä DEH deliveries
always include a special power system analysis to ensure its integrity
with the platform system.
Wärtsilä has been part of the DEH development in Norway since
the nineties and we can provide:
z FEED Studies (Front End Engineering & Design Key Benefits)
z Topside system design to meet subsea power requirement
z Power system analysis
z Tailor made Topside package
z Project execution
z Pre-commissioning/commissioning and start up assistance
31
Wärtsilä Low Loss Concept

LLC is an energy efficient and highly redundant power distribution
system for electric propulsion applications.
The Low Loss Concept (LLC) is a power distribution system
comprising higher efficiency, lower weight and volume, and a high
system redundancy. The basic motive for the design is to reduce and
eliminate the need for supply (pulse) transformers to the frequency
converters, especially those supplying electric propulsion.
LLC is available for both Low Voltage and Medium Voltage
applications. It covers all power applications between 5 MW and
45 MW in both the Low Voltage and Medium Voltage versions. It is
effective also in vessels with operating profiles that require variable
speeds, such as OSVs.
The LLC power distribution system has been patented internationally
by the Wärtsilä Group.
32
ELECTRIC PROPULSION SYSTEM
Wärtsilä Low Loss Hybrid
The introduction of Wärtsilä Low Loss Hybrid (LLH) and its integration
with a conventional diesel or dual-fuel engine generating sets, offers
significant efficiency improvement by running the engines on optimal
load and absorbing many of the load fluctuations through batteries.
The system is designed and integrated to optimise the overall operation
of the vessel.
The power and energy capacity of the battery should be suitable
to allow the engine to run for most of the time on optimal loads. The
system is designed and integrated to optimise the overall operation of
the vessel. A key element is hybrid control algorithms for load sharing
between units and efficient power and energy management.
Wärtsilä Low Loss Hybrid ensures substantial reduction in
emissions, and supports a sustainable operation with different fuels.
The yearly fuel savings have proven to be between 10–20% depending
on type of engines and configurations.
33
Capacitors Laminated busbar
Bus bar
Control panel
Brake
chopper
Water cooling
IGBT stacks
Motor breaker
Diode stacks
Commutating reactors
Solid, blast-proof construction
Wärtsilä Medium Voltage Power Drive

The new Medium Voltage Power Drive is specifically designed for
the marine market, accommodating higher power requirements for
propulsion, pumps, and compressors. The drive is designed to
accurately control speed, torque, and power for induction, permanent
magnet and synchronous machines.
The drive is optimized for safe and reliable operation. It is extremely
compact and, compared to other solutions on the market today, has
notable space and weight advantages.
Together with Wärtsilä’s patented medium voltage Low Loss
Concept (LLC), the introduction of next generation medium voltage
power drives brings increased efficiency and redundancy to the larger
marine electric propulsion market, with the added benefit of reduced
weight and space requirements.
Supply voltage 6 600 VAC
Motor voltage 6 000 VAC
Motor power 11 000 kW (pf > 0.88 and motor efficiency > 0.97)
Apparent output power normal duty 13 000 kW
Max. output frequency 200 Hz (with derating)
Control Vector control/PWM output
Switchboard connection Direct with LLC or propulsion transformer
Cooling method Water
External cooling water 10–38°C fresh water
Protection IP32, IP44 on request
Dimensions converter (mm) 5 100 x 1 200 x 2 370 (width x depth x height)
Dimensions cooling unit (mm) 1 000 x 1 200 x 2 370 (width x depth x height)
34
POWER DRIVES
Wärtsilä active front end rectifier
The Wärtsilä Power Drive can also be delivered with an active rectifier
front end which allows for energy flow in both directions, eliminating
the need for transformers and braking resistors. Direct Current Control
and a network filter give small ripple currents and very low harmonic
distortion well below international standards.
Wärtsilä passive rectifier

The Wärtsilä Power Drive can be delivered with a diode rectifier in a 12,
18 or 24 pulse configuration, very well suited to either a Wärtsilä LLC
system or a standard transformer solution.
Wärtsilä Multidrive systems, DC sources

The Wärtsilä Power Drive can also be delivered as a multidrive system,
where the inverters are connected to the same DC-link. Combined with
our patented electronic DC breakers, these work independently. The
multidrive system can be connected to the main grid through either
active or diode rectifiers, and can also allow for DC-sources such as
batteries and fuel cells.
In max Wärtsilä passive Wärtsilä active

Model motor (1) rectifier drive front end rectifier drive
Power Current Width Weight Width Weight
MW (A) (mm) (kg) (mm) (kg)
0.8 800 900 800 900 1 600
1.5 1 500 900 900 1 500 2 200
2.7 2 700 1 500 1 400 3 000 4 600
3.8 3 800 2 100 1 900 5 100 7 700
5.5 5 500 2 700 2 300 6 600 9 700
1) In max motor is the highest possible nominal current we can give to the electric motor from the drive.
All cabinets have 1 000 mm depth and 2 051 mm height.
35
SWITCHBOARDS
Wärtsilä low and medium voltage switchboard systems are optimised
for marine use.
When developing our switchboard systems, the need for easy
installation and maintenance is a key consideration. The system is
module-based and, therefore, very flexible. Later extensions can also
be easily added.
36
SWITCHBOARDS

Wärtsilä Marine Switchboard – LV
Technical data
Rated voltage (V)................................................................................ £ 690
Short circuit test IEC 439–1
Surge current (peak) kA............................................................. 176
Prospective current (RMS) kA..................................................... 80
Thermal rated current (1s)........................................................... 80
Bus bar (A)............................................................................... 4000
Wärtsilä MSS36 Switchboard – LV

Technical data
Rated voltage (V)........................................................................ £ 690
Short circuit test IEC 61439–1
Surge current (peak) kA............................................................. 220
Prospective current (RMS) kA................................................... 100
Thermal rated current (1s)......................................................... 100
Rated current
Bus bar (A)......................................................................... 4000 x 2
Circuit breaker.......................................................... upp to 6300 A
Enclosure IEC 529/947–1
Doors closed...........................................................................IP 42
All doors open.........................................................................IP 20
Air and creepage current distances IEC......................................... 664
Arc test IEC 61641 prospective current (RMS) kA......................... 100
Wärtsilä McSet Switchboard – MV

Technical data
Rated voltage (kV).............................7.2................... 12..................17.5
Insulation level
50 Hz/1 min (kV RMS).................. 20................... 28.................... 38
1.2/50 ms(kV peak)........................ 60................... 75.................... 95
Rated current
Bus bars (A)............................................................................. 4000
Droppers (A)............................................................................ 4000
Short circuit current
Thermal (kA).....................................................................50 (1 sec)
Flame arc test IEC 62271-200..................................................... 50 kA
37
ENGINES AND GENERATING SETS
WÄRTSILÄ ENGINES
The design of the Wärtsilä engine range is based on the vast amount of
knowledge accumulated over years of successful operation.
Robust engines derived from pioneering heavy fuel technology
have been engineered to provide unquestionable benefits for the
owners and operators of Wärtsilä engines and generating sets:
zz Proven reliability
zz Low emissions
zz Low operating costs
zz Fuel flexibility
Benefits for the shipyard include installation friendliness, embedded
automation systems, and built-on modularised auxiliary systems.
38
WÄRTSILÄ ENGINES
Fuel flexibility
Wärtsilä is continuously developing its portfolio of gas and multi-fuel
engines to suit different marine applications, be they offshore oil and
gas installations where gaseous fuel is available from the process, or
a merchant vessel operating in environmentally sensitive areas. The
Wärtsilä engines offer high efficiency, low exhaust gas emissions
and safe operation. The innovative multi-fuel technology allows the
flexibility to choose between gas and liquid fuel. When necessary, the
engines are capable of switching from one fuel to the other without any
interruption in power generation.
39
Wärtsilä 20DF IMO Tier III
Cylinder bore 200 mm Fuel specification: Fuel oil
Piston stroke 280 mm 700 cSt/50°C 7200 sR1/100°F
Cylinder output 185 kW/cyl ISO 8217, category ISO-F-DMX,
Speed 1200 rpm DMA and DMB
Mean effective pressure 21.0 bar
BSEC 7700 kJ/kWh at ISO cond.
Piston speed 11.2 m/s
Rated power
Engine type kW
6L20DF 1 110
8L20DF 1 480
9L20DF 1 665
Engine dimensions (mm) and weights (tonnes)

Engine type A* A B C D F Weight
6L20DF 3 254 3 108 1 705 1 690 1 800 624 9.4
8L20DF 3 973 3 783 1 705 1 824 1 800 624 11.1
9L20DF 4 261 4 076 1 705 1 824 1 800 624 11.7
For definitions see page 49.
40
DUAL-FUEL ENGINES
Wärtsilä 34DF IMO Tier III, EPA T2/T3

Cylinder output 500 kW/cyl ISO 8217, category ISO-F-DMX,
Speed 750 rpm DMA and DMB
Rated power
Engine type kW
6L34DF 3 000
8L34DF 4 000
9L34DF 4 500
12V34DF 6 000
16V34DF 8 000

Engine type A B C D F Weight
6L34DF 5 325 2 550 2 380 2 345 1 155 35
8L34DF 5 960 2 550 2 610 2 345 1 155 44
9L34DF 6 870 2 550 2 610 2 345 1 155 49
12V34DF 6 865 2 435 2 900 2 120 1 210 61
16V34DF 7 905 2 570 3 325 2 120 1 210 77
41
Cylinder bore 460 mm Fuel specification:Fuel oil
Cylinder output 1045, 1145 kW/cyl ISO 8217, category ISO-F-DMX,
Speed 600 rpm DMA & DMB
Mean effective pressure 21.7, 23.8 bar
Rated power
Engine type High output 1145 kW/cyl High efficiency 1045 kW/cyl
6L46DF 6 870 6 270
7L46DF 8 015 7 315
8L46DF 9 160 8 360
9L46DF 10 305 9 405
12V46DF 13 740 12 540
14V46DF 16 030 14 630
16V46DF 18 320 16 720
Dimensions (mm) and weights (tonnes)

6L46DF 8 670 8 833 3 255 3 185 3 750 1 430 102
7L46DF 9 350 9 513 3 255 3 185 3 750 1 430 118
8L46DF 10 310 10 830 3 445 3 185 3 750 1 430 130
9L46DF 10 990 11 510 3 445 3 185 3 750 1 430 146
12V46DF 11 120 10 350 3 670 4 555 3 800 1 620 184
14V46DF 12 170 11 400 3 670 4 555 3 800 1 620 223
16V46DF 13 450 12 780 3 860 5 174 3 800 1 620 235
42
DUAL-FUEL ENGINES

Speed 500, 514 rpm DMA and DMB
Piston speed 9.7, 9.9 m/s
Rated power
50 Hz 60 Hz
Engine type
Engine kW Gen. kW Engine kW Gen. kW
6L50DF 5 700 5 500 5 850 5 650
8L50DF 7 600 7 330 7 800 7 530
9L50DF 8 550 8 250 8 775 8 470
12V50DF 11 400 11 000 11 700 11 290
16V50DF 15 200 14 670 15 600 15 050
18V50DF 17 100 16 500 17 550 16 940
Generator output based on a generator efficiency of 96.5%.

Engine type A B C D F Weight
6L50DF 8 115 3 580 3 270 4 000 1 455 96
8L50DF 10 230 3 920 3 360 4 000 1 455 128
9L50DF 11 140 3 920 3 505 4 000 1 455 148
12V50DF 10 410 4 055 3 810 3 600 1 500 175
16V50DF 13 085 4 400 4 730 3 600 1 500 220
18V50DF 14 180 4 400 4 730 3 600 1 500 240
43
Wärtsilä 20 IMO Tier II
Cylinder output 200 kW/cyl ISO 8217, category ISO-F-RMK 700
Speed 1000 rpm SFOC 185 g/kWh at ISO condition
Rated power
Engine type kW
4L20 800
6L20 1 200
8L20 1 600
9L20 1 800

Engine type A* A B* B C* C D F Weight
4L20 – 2 510 – 1 348 – 1 483 1 800 725 7.2
6L20 3 254 3 108 1 528 1 348 1 580 1 579 1 800 624 9.3
8L20 3 973 3 783 1 614 1 465 1 756 1 713 1 800 624 11.0
9L20 4 261 4 076 1 614 1 449 1 756 1 713 1 800 624 11.6
*Turbocharger at flywheel end.
44
DIESEL ENGINES

Mean effective pressure 24 bar
Rated power
Engine type kW
6L26 2 040
8L26 2 720
9L26 3 060
12V26 4 080
16V26 5 440

F F Weight Weight
Engine A* A B* B C* C D dry wet dry wet
type sump sump sump sump
6L26 4 401 4 175 1 882 1 882 1 951 2 021 2 420 818 950 18.1 18.4
8L26 5 304 4 999 2 019 1 882 2 011 2 102 2 420 818 950 22.0 22.5
9L26 5 703 5 389 2 019 1 882 2 011 2 102 2 420 818 950 23.9 24.8
12V26 5 218 4 968 2 074 2 074 2 453 2 453 2 060 800 1 110 29.2 31.9
16V26 6 223 5 973 2 151 2 151 2 489 2 489 2 060 800 1 110 33.0 36.5
45
Cylinder output 500, 580 kW/cyl ISO 8217, category ISO-F-RMK 700
Rated power
Engine type 580 kW/cyl 500 kW/cyl
6L32 3 480 3 000
7L32 – 3 500
8L32 4 640 4 000
9L32 5 220 4 500
12V32 6 960 6 000
16V32 9 280 8 000
18V32 – 9 000

Engine type A* A B* B C D F Weight
6L32 4 980 5 260 2 560 2 490 2 305 2 345 1 155 33.3
7L32 5 470 5 750 2 560 2 490 2 305 2 345 1 155 39.0
8L32 5 960 6 245 2 360 2 295 2 305 2 345 1 155 43.4
9L32 6 450 6 730 2 360 2 295 2 305 2 345 1 155 46.8
12V32 6 935 6 615 2 715 2 665 3 020 2 120 1 475 58.7
16V32 8 060 7 735 2 480 2 430 3 020 2 120 1 475 74.1
18V32 8 620 8 295 2 480 2 430 3 020 2 120 1 475 81.2
46
DIESEL ENGINES

Rated power
Engine type kW
6L38 4 350
8L38 5 800
9L38 6 525
12V38 8 700
16V38 11 600

Engine type A* A B* B C D F Weight
6L38 6 345 6 215 2 830 2 830 2 122 3 135 1 115 51
8L38 7 960 7 844 2 996 2 972 2 209 3 135 1 115 63
9L38 8 560 8 444 2 996 2 972 2 209 3 135 1 115 72
12V38 7 461 7 344 3 080 3 080 3 030 2 855 1 435 88
16V38 9 018 8 904 3 281 3 281 3 030 2 855 1 435 110
* Turbocharger at flywheel end.
47
Wärtsilä 46F IMO Tier II
Mean effective pressure 24.9 bar Option: Lubricating oil module
Piston speed 11.6 m/s integrated on engine.
Rated power
Engine type kW
6L46F 7 200
7L46F 8 400
8L46F 9 600
9L46F 10 800
12V46F 14 400
14V46F 16 800
16V46F 19 200

6L46F 8 430 8 620 3 500 2 930 3 750 1 430 97
7L46F 9 260 9 440 3 800 2 950 3 750 1 430 113
8L46F 10 080 10 260 3 800 2 950 3 750 1 430 124
9L46F 10 900 11 080 3 800 2 950 3 750 1 430 140
12V46F 10 080 10 150 3 820 4 050 3 800 1 620 173
14V46F 11 650 11 729 4 243 4 678 3 800 1 620 216
16V46F 12 700 12 779 4 243 4 678 3 800 1 620 233
* Turbocharger at flywheel end.
48
DIESEL ENGINES
Definitions and notes
for Wärtsilä engines
Engine dimensions
A* Total length of the engine when the turbocharger is located
at the flywheel end.
A Total length of the engine when the turbocharger is located
at the free end.
B Height from the crankshaft centreline to the highest point.
B* Height from the crankshaft centreline to the highest point when
the turbocharger is located at the flywheel end.
C Total width of the engine.
C* Total width of the engine when the turbocharger is located
at the flywheel end.
D Minimum height from the crankshaft centreline when removing
a piston.
F Distance from the crankshaft centreline to the bottom
of the oil sump.
Dimensions and weights
zz Dimensions are in millimetres and weights are in metric tonnes.
Indicated values are for guidance only and are not binding.
zz Cylinder configurations: L = in-line and V = v-form.
Specific fuel oil and gas energy consumption

zz At ISO standard reference conditions
zz Lower calorific value of fuel 42 700 kJ/kg
zz Tolerance 5%
zz Without engine driven pumps
zz Natural gas
zz Methane number min. 80
zz Lower heating value min. 28 MJ/Nm3
zz Gas pressure 5.5 bar
ISO standard reference conditions

Total barometric pressure .............................................1.0 bar
Suction air temperature .............................................25°C
Charge air, or scavenge air,
cooling water temperature .............................................25°C
Relative humidity .............................................30%
49
WÄRTSILÄ AUXPAC
Wärtsilä Auxpac generating sets are available in a selected range as
pre-engineered and pre-commissioned auxiliary generating sets. The
common baseframe is optimised for the package, which together
with the compact design of the engine and the selected generator,
offers unmatched power-to-space and power-to-weight ratios. Other
50
GENERATING SETS
benefits of pre-engineering include readily available documentation,

which also includes models in Tribon® format, and short lead-times.
Auxpac generating sets are offered as 400 V / 690 V / 6600 V – 50 Hz
and 400 V / 690 V / 6600 V – 60 Hz in the power range 500 kW to
4300 kW.
Pre-Engineered Medium-Speed Generating Sets

Main data of generators 60 Hz 50 Hz IMO Tier II
Voltage 450, 690, 6600 V 400, 690, 6600 V Fuel specification:
Protection class IP 23, IP 44 * IP 23, IP 44 * Fuel oil 700 cSt/50°C
Temperature rise ISO 8217, category

Class F Class F
and isolation ISO-F-RMK 55
Cooling Air, water * Air, water * * Option
51

A16 – Dimensions (mm) and weights (tonnes)
60Hz Output (kWe) A E L Weight
525W5L16 525 4 530 1 400 1 960 9.8
630W6L16 630 4 787 1 400 1 960 10.8
735W7L16 735 5 050 1 400 1 960 11.8
50Hz
455W5L16 455 4 530 1 400 1 960 9.8
545W6L16 545 4 787 1 400 1 960 10.8
635W7L16 635 5 050 1 400 1 960 11.8

60 Hz Output kWe A E L Weight
520W4L20 520 4 407 1 700 2 248 13.6
645W4L20 645 4 457 1 700 2 248 14.3
760W6L20 760 5 057 1 700 2 248 17.3
875W6L20 875 5 227 1 700 2 248 17.3
975W6L20 975 5 227 1 700 2 248 17.7
1050W6L20 1 050 5 227 1 700 2 248 18.0
1200W8L20 1 200 5 852 1 920 2 373 21.3
1400W8L20 1 400 5 852 1 920 2 373 22.4
1600W9L20 1 600 6 507 1 920 2 455 23.4
50 Hz
520W4L20 520 4 399 1 770 2 248 13.3
670W4L20 670 4 407 1 770 2 248 13.4
790W6L20 790 5 007 1 770 2 248 16.4
860W6L20 860 5 057 1 770 2 248 16.9
1000W6L20 1 000 5 212 1 770 2 248 17.9
1140W6L20 1 140 5 212 1 770 2 248 18.1
1350W8L20 1 350 5 852 1 920 2 373 21.3
1550W9L20 1 550 6 507 1 920 2 373 22.8
1700W9L20 1 700 6 507 1 920 2 455 23.1
52
GENERATING SETS

60 Hz Output kWe A E L Weight
1800W6L26 1 800 6 422 2 246 2 938 31.7
2100W8L26 2 100 7 664 2 332 3 025 41.7
2400W8L26 2 400 7 744 2 332 3 025 42.3
2700W9L26 2 700 8 799 2 332 3 090 46.8
50 Hz
1950W6L26 1 950 6 422 2 246 2 938 31.7
2250W8L26 2 250 7 644 2 332 3 025 41.7
2550W9L26 2 550 8 809 2 332 3 090 46.5
2850W9L26 2 850 8 809 2 332 3 090 46.5

60Hz Output (kWe) A E L Weight
2400W6L32 2 400 7 930 2 690 3 725 55
2750W6L32 2 750 8 030 2 690 3 725 57
3220W7L32 3 220 8 360 2 690 3 920 64
3680W8L32 3 680 9 110 2 690 3 875 70
4150W9L32 4 150 10 475 2 890 3 925 84
50Hz
2400W6L32 2 400 7 930 2 690 3 725 55
2870W6L32 2 870 8 030 2 690 3 725 57
3350W7L32 3 350 8 360 2 690 3 920 64
3840W8L32 3 840 9 110 2 690 3 875 70
4320W9L32 4 320 10 475 2 890 3 925 84
53
WÄRTSILÄ GENSETS
A wide range of generating sets, comprising the generator and diesel
engine mounted on a common baseframe, are available for both service
power generation and for diesel-electric propulsion. All generating
sets listed in this section are based on medium-speed diesel engines
designed for operating on heavy fuel oil. These generating sets are
resiliently mounted and the generator voltage can be selected in all
cases, except for the Auxpac generating sets, which are Low Voltage
only. Larger diesel generators are delivered for separate mounting of
the diesel engine and generator.
Power Range for Wärtsilä Gensets

Wärtsilä Genset 20
Wärtsilä Genset 20DF
Wärtsilä Genset 34DF

kW 0 2000 4000 6000 8000 10,000 12,000
54
GENERATING SETS
Wärtsilä Genset 20 IMO Tier II

Cylinder bore 200 mm Generator voltage 0.4–13.8 kV
Piston stroke 280 mm Generator efficiency 0.95–0.96
Cylinder output 185, 200 kW/cyl Fuel specification: Fuel oil
Speed 900, 1000 rpm 700 cSt/50°C 7200 sR1/100°F
Mean effective pressure 27.3, 28.0 bar ISO 8217, category ISO-F-RMK 700
Piston speed 8.4, 9.3 m/s SFOC 186 g/kWh at ISO condition
Rated power
60 Hz 50 Hz
185 kW/cyl, 900 rpm 200 kW/cyl, 1000 rpm
Engine type
Eng. kW Gen. kW Eng. kW Gen. kW
4L20 740 700 800 760
6L20 1 110 1 055 1 200 1 140
8L20 1 480 1 405 1 600 1 520
9L20 1 665 1 580 1 800 1 710

Engine type A* E* I* K L* Weight*
4L20 4 910 1770/1920 990 1 800 2338 14.0
6L20 5 325 1770/1920/2070 895/975/1025 1 800 2243/2323/2373 16.8
8L20 6 030 1920/2070 1025/1075 1 800 2474/2524 20.7
9L20 6 535 2070/2300 1075/1125 1 800 2524/2574 23.8
* Dependent on generator type and size.
55
Cylinder output 325, 340 kW/cyl Fuel specification: Fuel oil
Rated power
60 Hz 50 Hz
Engine type 325 kW/cyl, 900 rpm 340 kW/cyl, 1000 rpm
Eng. kW Gen. kW Eng. kW Gen. kW
6L26 1 950 1 870 2 040 1 960
8L26 2 600 2 495 2 720 2 610
9L26 2 925 2 810 3 060 2 940
12V26 3 900 3 745 4 080 3 915
16V26 5 200 4 990 5 440 5 220

6L26 7 500 2 300 1 200 2 430 3 081 40
8L26 8 000 2 300 1 200 2 430 3 219 45
9L26 8 500 2 300 1 200 2 430 3 219 50
12V26 8 400 2 700 1 560 2 765 3 634 60
16V26 9 700 2 700 1 560 2 765 3 711 70
56
GENERATING SETS

480, 500, 560,
Cylinder output Fuel specification: Fuel oil
580 kW/cyl
Rated power
60 Hz/720 rpm 50 Hz/750 rpm
Engine 560 kW/cyl 480 kW/cyl 580 kW/cyl 500 kW/cyl
type Engine Gen. Engine Gen. Engine Gen. Engine Gen.
kW kW kW kW kW kW kW kW
6L32 3 360 3 230 2 880 2 760 3480 3340 3 000 2 880
7L32 – – 3 360 3 230 – – 3 500 3 560
8L32 4 480 4 300 3 840 3 690 4 640 4 450 4 000 3 840
9L32 5 040 4 840 4 320 4 150 5 220 5 010 4 500 4 320
12V32 6 720 6 450 5 760 5 530 6 960 6 680 6 000 5 760
16V32 8 960 8 600 7 680 7 370 9 280 8 910 8 000 7 680
18V32 – – 8 640 8 290 – – 9 000 8 640
6L32 8 505 2 490 1 450 2 345 3 745 57
7L32 9 215 2 690 1 650 2 345 4 140 69
8L32 10 410 2 690 1 630 2 345 4 010 76
9L32 10 505 2 890 1 630 2 345 4 010 86
12V32 10 700 3 060 1 700 2 120 4 130 100
16V32 11 465 3 360 1 850 2 120 4 445 127
18V32 11 825 3 360 1 850 2 120 4 280 133
Generator output based on a generator efficiency of 96%.
Final measurements might differ depending on selected turbocharger execution.
57
Cylinder output 725 kW/cyl Fuel specification: Fuel oil
Speed 600 rpm 700 cSt/50°C 7200 sR1/100°F
Mean effective pressure 26.9 bar ISO 8217, category ISO-F-RMK 700
Piston speed 9.5 m/s SFOC 176 g/kWh at ISO condition
Rated power
50 Hz, 60 Hz
Engine type
Eng. kW Gen. kW
6L38 4 350 4 200
8L38 5 800 5 600
9L38 6 525 6 300
12V38 8 700 8 400
16V38 11 600 11 200

6L38 9 600 2 900 1 655 3 135 4 485 90
8L38 12 000 2 900 1 705 3 135 4 475 110
9L38 12 300 3 100 1 805 3 135 4 575 130
12V38 11 900 3 600 2 015 2 855 4 945 160
16V38 13 300 3 800 2 015 2 855 5 120 200

58
GENERATING SETS
Wärtsilä Genset 20DF IMO Tier III

Cylinder output 160/185 kW/cyl ISO 8217, category ISO-F-DMX,
Speed 1000/1200 rpm DMA and DMB
BSEC 7770 kJ/kWh at tISO cond.
Generator voltage 0.4–13.8 kV
Generator efficiency 0.95–0.96
Rated power
60 Hz 50 Hz
6L20DF 1 110 1 065 960 920
8L20DF 1 480 1 420 1 280 1 230
9L20DF 1 665 1 600 1 440 1 380

Engine type A* E I* K L* Weight
6L20DF 5 325 2 070 895/975/1025 1 800 2 731 16.9
8L20DF 6 030 2 070 1025/1075 1 800 2 781 20.8
9L20DF 6 535 2 300 1075/1125 1 800 2 831 23.9
59
Wärtsilä Genset 34DF IMO Tier III, EPA T2/T3
Speed 720, 750 rpm DMA and DMB
Generator voltage 0.4–13.8 kV
Generator efficiency 0.95–0.97
Rated power
60 Hz 50 Hz
6L34DF 2 880 2 770 3 000 2 890
8L34DF 3 840 3 690 4 000 3 840
9L34DF 4 320 4 150 4 500 4 320
12V34DF 5 760 5 530 6 000 5 770
16V34DF 7 680 7 370 8 000 7 680

Engine type A* E* I* K L* Weight
6L34DF 8 765 2 290 1 450 2 345 4 000 60
8L34DF 10 410 2 960 1 630 2 345 4 010 76
9L34DF 10 610 2 890 1 630 2 345 4 180 87
12V34DF 10 260 3 060 1 900 2 120 4 335 99
16V34DF 11 465 3 360 1 850 2 120 4 445 124
* Dependent on generator type.

Generator output based on a generator efficiency of 96%.
60
GENERATING SETS
Definitions and Notes
for Generating sets
Generating set dimensions
A Total length of the generating set.
E Total width of the generating set.
I Distance from the bottom of the common baseframe
to the crankshaft centreline.
K Minimum height from the crankshaft centreline when
removing a piston.
L Total height of the generating set.
Dimensions are in millimetres and weights are in metric tonnes.
Indicated values are for guidance only and are not binding.
Cylinder configurations: L = in-line, and V = V-form.
Specific fuel oil consumption
zz At ISO standard reference conditions
zz Lower calorific value of fuel 42 700 kJ/kg
zz Tolerance 5%
zz Without engine driven pumps
zz Natural gas
zz Methane number min. 80
zz Lower heating value min. 28 MJ/Nm3
zz Gas pressure 5.5 bar

Total barometric pressure .............................................1.0 bar
Suction air temperature .............................................25°C
Charge air, or scavenge air,
cooling water temperature .............................................25°C
Relative humidity .............................................30%
61
ENGINE AUXILIARY SYSTEMS
All auxiliary equipment needed for the diesel engines can be delivered by
Wärtsilä. Some equipment can be built onto the engine, and the rest can
be delivered separately or grouped in modules.
Depending on the engine type and application, a lubricating oil pump,
HT- and LT-cooling water pumps, fuel pump, oil filters and coolers,
prelubricating oil pump and thermostatic valves can be added to the
engine.
Stand-by pumps, seawater pumps, central coolers, starting air
vessels, lubricating oil automatic filters, exhaust gas silencers and boilers
are typically delivered for separate mounting.
Standardised modular auxiliary units
z Fuel oil booster z Starting air compressors
z Fuel oil separating z Oil mist separator
z Lubricating oil separating z Oily water bilge separator
z Cooling water preheating
Maximum compatibility is ensured when auxiliary systems are delivered

together with the main propulsion engines and diesel generator sets.
Whenever necessary, the auxiliary systems are tailored to optimise the
operating performance for a specific trade. The systems are specified to
minimise building costs and operating costs for a specific combination of
main and auxiliary engines.
Fuel booster unit.
62
Customised modular auxiliary units are available on request.
Module consisting of preheater, cooling water thermostatic valves, lubricating

oil automatic filter, pre-lubricating oil pump and fuel oil booster unit.
Fuel oil transfer pump module with Oil mist separator module.
heater.
63
WÄRTSILÄ LOW-SPEED ENGINES

Wärtsilä low-speed, two-stroke engines are the optimal propulsion
solution for merchant vessels with directly driven propellers. Wärtsilä’s
well proven electronically-controlled common-rail technology plays a
key role in enabling ship owners to reduce fuel and lubricants costs.
The benefits to shipowners and operators may be summarised as:
zz The optimal power and speed for every operational need
zz Competitive capital cost
zz Lowest possible fuel consumption over the whole operating range,
especially in part-load
zz Operate on high density fuel ISO F 8217:2012/RMK700
zz Special tunings to suit particular sailing profiles
zz Low cylinder oil feed rate
zz Full compliance with NOX emission control regulations
64
LOW-SPEED ENGINES
zz Smokeless operation at manoeuvring and sailing conditions

zz Low steady operational speeds
zz Up to five years between overhauls
zz Reduced maintenance requirements, resulting in low operational
costs, higher reliability and durability
The following Wärtsilä brand RT-flex engines are available on request

and supported by Winterthur Gas & Diesel
zz RT-flex58T-D_ER-3................ 5 400–14 245 kW/80–105 rpm
zz RT-flex60C-B......................... 8 450–21 780 kW/91–114 rpm
zz RT-flex68D............................. 10 950–25 040 kW/76–95 rpm
zz RT-flex82T ............................. 21 720–40 680 kW/68–80 rpm
zz RT-flex82C............................. 21 720–54 240 kW/87–102 rpm
zz RT-flex84T-D.......................... 14 700–37 800 kW/61–76 rpm
zz RT-flex96C............................. 24 000–80 080 kW/92–102 rpm
65

Wärtsilä X35-B IMO Tier II/Tier III (SCR)
Cylinder bore 350 mm
Piston stroke 1550 mm
Speed 118–167 rpm
Mean effective pressure at R1 21.0 bar
Stroke / bore 4.43
Rated power, principal dimensions and weights

Output in kW at
Length A Weight
Cyl. 167 rpm 118 rpm mm tonnes
R1 R2 R3 R4
5 4 350 3 475 3 075 2 450 4 398 74
6 5 220 4 170 3 690 2 940 5 010 84
7 6 090 4 865 4 305 3 430 5 622 95
8 6 960 5 560 4 920 3 920 6 234 105
B C D E
Dimensions 2 284 830 5 556 1 605
(mm) F1 F2 F3 G
6 736 6 790 6 325 1 326
Brake specific fuel consumption (BSFC) in g/kWh

Full load
Rating point R1 R2 R3 R4
BMEP, bar 21.0 16.8 21.0 16.8
BSFC Standard Tuning 175 169 175 169
Part load,% of R1 85 70 85 70 60
Tuning variant Standard Standard Delta Delta Low-Load
BSFC 171.4 171.0 170.7 169.5 166.6
E
F2 / F3
F1
D
C
G
A B
66
LOW-SPEED GENERATION X ENGINES

Speed 104–146 rpm
Stroke / bore 4.43

Output in kW at
Length A Weight
R1 R2 R3 R4
5 5 675 4 550 4 050 3 250 5 107 109
6 6 810 5 460 4 860 3 900 5 807 125
7 7 945 6 370 5 670 4 550 6 507 140
8 9 080 7 280 6 480 5 200 7 207 153
B C D E
Dimensions 2 610 950 6 335 1 734
(mm) F1 F2 F3 G
7 635 7 760 7 300 1 411

Full load
BMEP, bar 21.0 16.8 21.0 16.8
Part load,% of R1 85 70 85 70 60
BSFC 170.4 170.0 169.7 168.5 165.6
E
F2 / F3
F1
D
C
G
A B
67

Wärtsilä X52 IMO Tier II/Tier III (SCR)
Speed 79-105 rpm
Stroke / bore 4.45

Output in kW at
Length A Weight
R1 R2 R3 R4
4 7 240 5 440 5 440 4 080 4 970 184
5 9 050 6 800 6 800 5 100 5 910 217
6 10 860 8 160 8 160 6 120 6 850 251
7 12 670 9 520 9 520 7 140 7 790 288
8 14 480 10 880 10 880 8 160 8 730 323
B C D E
Dimensions 3 495 1 205 8 444 2 146
(mm) F1 F2 F3 G
10 150 10 150 9 425 1 866

Full load
BMEP, bar 21.0 15.8 21.0 15.8
Part load, % of R1 85 70 85 70 65
BSFC 163.2 162.8 162.5 161.3 158.4
E
F2 / F3
F1
D
C
A B
68

Speed 77–103 rpm
Mean effective pressure at R1/R1+ 20.5/19.3 bar
Stroke / bore 4.29

Output in kW at
Length A Weight
Cyl. 97 / 103 rpm 77 rpm mm tonnes
R1 / R1+ R2 / R2+ R3 R4
4 10 640 8 000 8 440 6 360 5 895 270
5 13 300 10 000 10 550 7 950 7 000 325
6 15 960 12 000 12 660 9 540 8 110 377
7 18 620 14 000 14 770 11 130 9 215 435
8 21 280 16 000 16 880 12 720 10 320 482
B C D E
Dimensions 4 200 1 360 9 580 3 915
(mm) F1 F2 F3 G
11 670 11 670 10 800 2 110

Full load
Rating point R1/R1+ R2/R2+ R3 R4
BMEP, bar 20.5/19.3 15.4/14.5 20.5 15.4
BSFC Standard Tuning 167/166 160 167 160
Part load,% of R1/R1+ 85 70 85 70 65
BSFC 163.4/162.4 163.0/162.0 162.7/161.7 161.5/160.5 158.2/157.4
E
F2 / F3
F1
D
C
A B
69

Speed 66–89 rpm
Stroke / bore 4.29

Output in kW at
Length A Weight
R1 / R1+ R2 / R2+ R3 R4
4 14 440 10 800 11 360 8 480 6 790 407
5 18 050 13 500 14 200 10 600 8 085 481
6 21 660 16 200 17 040 12 720 9 375 561
7 25 270 18 900 19 880 14 840 10 665 642
8 28 880 21 600 22 720 16 960 11 960 716
B C D E
Dimensions 4 780 1 575 10 790 4 710
(mm) F1 F2 F3 G
13 560 13 560 12 580 2 455

Full load
BMEP, bar 20.5/19.4 15.4/14.5 20.5 15.4
Part load,% of R1/R1+ 85 70 85 70 65
BSFC 163.4/162.4 163.0/162.0 162.7/161.7 161.5/160.5 158.2/157.4
E
F2 / F3
F1
D
C
A B
70

Speed 58–84 rpm
Stroke / bore 4.12

Output in kW at
Length A Weight
R1 / R1+ R2 / R2+ R3 R4
6 28 500 21 720 21 750 16 590 11 045 805
7 33 250 25 340 25 375 19 355 12 550 910
8 38 000 28 960 29 000 22 120 14 055 1 020
9 42 750 32 580 32 625 24 885 16 500 1 160
B C D E
Dimensions 5 320 1 800 12 250 5 400
(mm) F1 F2 F3 G
14 820 14 800 13 800 2 700

Full load
BMEP, bar 21.0/19.0 16.0/14.5 21.0 16.0
Part load,% of R1/R1+ 85 70 85 70 65
BSFC 161.4/159.4 161.0/159.0 160.7/158.7 159.5/157.5 156.2/154.5
E
F2 / F3
F1
D
C
A B
71

Speed 70–80 rpm
Stroke / bore 3.77

Output in kW at
Length A Weight
Cyl. 76/80 rpm 70 rpm mm tonnes
R1 / R1+ R2 / R2+ R3 R4
6 36 780 26 520 33 900 24 420 11 630 1 120
7 42 910 30 940 39 550 28 490 13 210 1 260
8 49 040 35 360 45 200 32 560 16 350 1 460
9 55 170 39 780 50 850 36 630 17 850 1 630
10 61 300 44 200 56 500 40 700 19 520 1 790
11 67 430 48 620 62 150 44 770 21 280 1 960
12 73 560 53 040 67 800 48 840 22 870 2 140
B C D E
Dimensions 5550 1900 12 950 6050
(mm) F1 F2 F3 G
15 420 15 450 14 240 2930

Full load
BMEP, bar 21.0/20.0 15.1/14.4 21.0 15.1
Part load,% of R1/R1+ 85 70 85 70 65
BSFC 162.4/161.4 162.0/161.0 161.7/160.7 160.5/159.5 155.8/154.9
E
F2 / F3
F1
D
C
A B
72
LOW-SPEED RT-flex ENGINES

Wärtsilä RT-flex48T-D IMO Tier II/Tier III (SCR)
Speed 102–127 rpm
Stroke / bore 4.17

Output in kW at
Length A Weight
R1 R2 R3 R4
5 7 275 5 100 5 825 5 100 5 314 171
6 8 730 6 120 6 990 6 120 6 148 205
7 10 185 7 140 8 155 7 140 6 982 225
8 11 640 8 160 9 320 8 160 7 816 250
B C D E
Dimensions 3 170 1 085 7 334 3 253
(mm) F1 F2 F3 G
9 030 9 030 8 790 1 700

Full load
BMEP, bar 19.0 13.3 19.0 16.6
Part load,% of R1 85 70 85 70 60
BSFC 166.4 166.0 165.7 164.5 162.2
E
F2 / F3
F1
D
C
G
A B
73

Wärtsilä RT-flex50-D IMO Tier II/Tier III (SCR)
Speed 95–124 rpm
Stroke / bore 4.10

Output in kW at
Length A Length A* Weight
Cyl. 124 rpm 95 rpm mm mm tonnes
R1 R2 R3 R4
5 8 725 6 650 6 700 5 100 5 576 6 793 200
6 10 470 7 980 8 040 6 120 6 456 7 670 225
7 12 215 9 310 9 380 7 140 7 336 255
8 13 960 10 640 10 720 8 160 8 216 280
B C D E E*
Dimensions 3 150 1 088 7 646 3 570 1 900
(mm) F1 F2 F3 G
9 270 9 270 8 800 1 636

Full load
BMEP, bar 21.0 16.0 21.0 16.0
Part load,% of R1 85 70 85 70 60
BSFC 165.4 165.0 164.7 163.5 161.2
E
E*
A*
F2 / F3
F1
D
C
A B
74

Wärtsilä RT-flex50-B IMO Tier II/Tier III (SCR)
Speed 95–124 rpm
Stroke / bore 4.10

Output in kW at
Cyl. 124 rpm 95 rpm mm mm tonnes
R1 R2 R3 R4
5 8 300 6 325 6 375 4 850 5 576 6 793 200
6 9 960 7 590 7 650 5 820 6 456 7 670 225
7 11 620 8 855 8 925 6 790 7 336 255
8 13 280 10 120 10 200 7 760 8 216 280
B C D E E*
Dimensions 3 150 1 088 7 646 3 570 1 900
(mm) F1 F2 F3 G
9 270 9 270 8 800 1 636

Full load
BMEP, bar 20.0 15.2 20.0 15.2
Part load,% of R1 85 70 85 70 60
BSFC 166.4 166.0 165.7 164.5 162.2
E
E*
A*
F2 / F3
F1
D
C
A B
75

Wärtsilä RT-flex58T-E IMO Tier II/Tier III (SCR)
Speed 90–105 rpm
Mean effective pressure at R1 21 bar
Stroke / bore 4.17

Output in kW at
Length A Weight
R1 R2 R3 R4
5 11 750 7 900 10 075 7 900 6 381 281
6 14 100 9 480 12 090 9 480 7 387 322
7 16 450 11 060 14 105 11 060 8 393 377
8 18 800 12 640 16 120 12 640 9 399 418
B C D E
Dimensions 3 820 1 300 8 822 3 475
(mm) F1 F2 F3 G
10 960 11 000 10 400 2 000

Full load
BMEP, bar 21.0 14.1 21.0 16.5
Part load,% of R1 85 70 85 70 60
BSFC 164.4 164.0 163.7 162.5 160.2
E
F2 / F3
F1
D
C
G
A B
76

Wärtsilä RT-flex58T-D IMO Tier II/Tier III (SCR)
Speed 84–105 rpm
Stroke / bore 4.17

Output in kW at
Length A Weight
R1 R2 R3 R4
5 11 300 7 900 9 050 7 900 6 381 281
6 13 560 9 480 10 860 9 480 7 387 322
7 15 820 11 060 12 670 11 060 8 393 377
8 18 080 12 640 14 480 12 640 9 399 418
B C D E
Dimensions 3 820 1 300 8 822 3 475
(mm) F1 F2 F2 G
10 960 11 000 10 400 2 000

Full load
BMEP, bar 20.2 14.1 20.2 17.7
Part load,% of R1 85 70 85 70 60
BSFC 165.4 165.0 164.7 163.5 161.2
E
F2 / F3
F1
D
C
G
A B
77
Low-speed dual-fuel engines

Driven by emission regulations and recent fuel price developments,
the interest in gas as fuel for shipping is increasing. Wärtsilä is the
leading provider of medium-speed gas and dual-fuel engines since
2005. A major milestone was recently reached with 1000 engines sold,
collectively logging more than 9 million running hours. Wärtsilä dual-
fuel technology for 2-stroke engines is based on the pre-mixed lean
burn combustion principle already proven for the Wärtsilä 4-stroke
dual-fuel engines. The merits of this technology are:
zz no additional NOX reduction technologies are needed to fulfill the
IMO Tier III requirements
zz gas injection pressure < 16 bar
zz simple, reliable and low cost gas supply system
78
LOW-SPEED DUAL-FUEL ENGINES

Wärtsilä RT-flex50DF IMO Tier III in gas mode
Cylinder bore 500mm
Piston stroke 2050mm
Speed 99–124rpm
Stroke/bore 4.10

Output in kW at
Cyl. 124 rpm 124 rpm 99 rpm 99 rpm (mm) (mm) tonnes
R1 R2 R3 R4
5 7 200 6 000 5 750 4 775 5 576 6 793 200
6 8 640 7 200 6 900 5 730 6 456 7 670 225
7 10 080 8 400 8 050 6 685 7 336 255
8 11 520 9 600 9 200 7 640 8 216 280
B C D E E*
Dimensions 3 150 1 088 7 646 3 570 1 900
(mm) F1 F2 F3 G
9 270 9 250 8 700 1 636
Brake specific consumptions in gas mode

BSEC (energy) kJ/kWh 7 125 7 177 7 122 7 178
BSGC (Gas) g/kWh 140.8 141.5 140.3 141.0
BSPC (pilot fuel) g/kWh 2.0 2.4 2.5 3.0
Brake specific fuel consumption in diesel mode

BSFC (diesel) g/kWh 182.3 182.3 182.3 182.3
E
E*
A*
F2 / F3
F1
D
C
A B
79

Wärtsilä X52DF IMO Tier III in gas mode
Speed 82–105 rpm
Stroke / bore 4.45

Output in kW at
Length A Weight
R1 R2 R3 R4
5 7 450 6 200 5 825 4 850 5 950 217
6 8 940 7 440 6 990 5 820 6 900 251
7 10 430 8 680 8 155 6 790 7 850 288
8 11 920 9 920 9 320 7 760 8 800 323
B C D E
Dimensions 3 495 1 205 8 444 2 146
(mm) F1 F2 F3 G
10 150 10 150 9 425 1 866

BSGC (gas) g/kWh 140.8 141.5 140.3 141.0

BSFC (diesel) g/kWh 182.3 182.3 182.3 182.3
E
F2 / F3
F1
D
C
A B
80

Speed 80–103 rpm
Stroke / bore 4.29

Output in kW at
Length A Weight
R1 R2 R3 R4
5 11 925 9 925 9 250 7 700 7 000 325
6 14 310 11 910 11 100 9 240 8 110 377
7 16 695 13 895 12 950 10 780 9 215 435
8 19 080 15 880 14 800 12 320 10 320 482
B C D E
Dimensions 4 200 1 360 9 580 3 915
(mm) F1 F2 F3 G
11 778 11 778 10 908 2 110

BSGC (gas) g/kWh 139.2 140.2 138.8 139.7

BSFC (diesel) g/kWh 180.0 180.0 180.0 180.0
E
F2 / F3
F1
D
C
A B
81

Speed 69-89 rpm
Stroke / bore 4.29

Output in kW at
Length A Weight
R1 R2 R3 R4
5 16 125 13 425 12 500 10 400 8 085 481
6 19 350 16 110 15 000 12 480 9 375 561
7 22 575 18 795 17 500 14 560 10 665 642
8 25 800 21 480 20 000 16 640 11 960 716
B C D E
Dimensions 4 780 1 575 10 790 4 710
(mm) F1 F2 F3 G
13 628 13 628 12 648 2 455

BSGC (gas) g/kWh 139.4 140.4 139.0 139.9

BSFC (diesel) g/kWh 180.0 180.0 180.0 180.0
E
F2 / F3
F1
D
C
A B
82

Speed 65-84 rpm
Stroke / bore 4.12

Output in kW at
Length A Weight
R1 R2 R3 R4
6 25 920 21 600 20 070 16 710 11 045 805
7 30 240 25 200 23 415 19 495 12 550 910
8 34 560 28 800 26 760 22 280 14 055 1 020
9 38 880 32 400 30 105 25 065 16 500 1 160
B C D E
Dimensions 5 320 1 800 12 250 5 400
(mm) F1 F2 F3 G
14 820 14 800 13 800 2 700

BSGC (gas) g/kWh 138.7 139.7 138.4 139.3

BSFC (diesel) g/kWh 178.9 178.9 178.9 178.9
E
F2 / F3
F1
D
C
A B
83

Speed 70-80 rpm
Stroke / bore 3.77

Output in kW at
Length A Weight
R1 R2 R3 R4
6 31 920 26 580 27 930 23 250 11 630 1 120
7 37 240 31 010 32 585 27 125 13 210 1 260
8 42 560 35 440 37 240 31 000 16 350 1 460
9 47 880 39 870 41 895 34 875 17 850 1 630
10 53 200 44 300 46 550 38 750 19 520 1 790
11 58 520 48 730 51 205 42 625 21 280 1 960
12 63 840 53 160 55 860 46 500 22 870 2 140
B C D E
Dimensions 5 550 1 900 12 950 6 050
(mm) F1 F2 F3 G
15 420 15 450 14 240 2 930

BSGC (gas) g/kWh 138.5 139.5 138.4 139.3

BSFC (diesel) g/kWh 178.9 178.9 178.9 178.9
E
F2 / F3
F1
D
C
A B
84
LOW-SPEED ENGINES
Definitions and Notes for Low-Speed Engines
Total barometric pressure at R1 ......................................1.0 bar
Suction air temperature ............................................25°C
Relative humidity ............................................30%
Cooling water temperature before engine .......................25°C
Rating points for Wärtsilä low-speed engines
The engine layout fields for Engine-MCR
Power
Wärtsilä low-speed engines R1 R1+
are defined by the power/ Engine
layout field
speed rating points R1, R2,
R3 and R4 (see diagram to
the right). In certain engines, R3
the layout field is extended to
the points R1+ and R2+. R1,
R4 R2+
or R1+ instead if applicable,
R2
is the nominal maximum
continuous rating (MCR).
R4
Any power and speed within
the respective engine layout Speed
field may be selected as the
Contract-MCR (CMCR) point for an engine.
z All dimensions are in millimetres and are not binding.
z Piston dismantling heights
– F1: Min height for vertical removal
– F2: Min height for vertical removal with double-jib crane
– F3: Min height for tilted removal with double-jib crane
z The engine weight is net in metric tonnes (t), without oil and water,
and is not binding.
Fuel consumption
All brake specific fuel consumptions (BSFC) are quoted for fuel of
lower calorific value 42.7 MJ/kg for liquid fuel and 50.0 MJ/kg for gas
fuel, and for ISO standard reference conditions (ISO 15550 and 3046).
For all Wärtsilä low-speed and dual-fuel engines stepwise tolerances
have been introduced for the brake specific fuel consumption (BSFC):
z +5% tolerance for 100% to 85% engine load
85
Typical BSFC curves to illustrate Standard Tuning,

Delta Tuning, Delta Bypass Tuning and Low-Load Tuning
The BSFC guarantee is possible at several load points between

50–100%.
Standard Tuning, Delta Tuning, Delta Bypass Tuning and Low-Load
Tuning are available for all Wärtsilä low-speed diesel engines to provide
optimum fuel consumption and flexibility for different engine loads. Delta
Tuning focuses on reducing fuel consumption in the operating range
below 90% engine load. Delta Bypass Tuning provides increased steam
production between 50 and 100% engine power. Low-Load Tuning
reduces fuel consumption below 75% engine load.
Dual tuning is available on request and in cooperation with
Classification Societies.
Cylinder lubrication
The Pulse Lubricating System is the standard for the 2-stroke engine
portfolio. It electronically controls the injection timing and the load
dependent feed rate.
The feed-rate set point can be adjusted between 0.6 g/kWh and
1.2 g/kWh. The actual feed-rate is dependent on the residual BN taken
from the drain oil samples coming from the piston underside. This
increases the safe operation of piston running performance against
the negative influences from the Sulphur content in the fuel, ambient
conditions, and other detrimental factors.
The graph below illustrates the theoretical sulphur dependent
feed-rates based upon BN 100 cylinder lubrication oil. These three
measured points represent various engine feed-rate settings, which
have been adjusted according to the unique results from the piston
underside drain oil analysis of each engine.
86
LOW-SPEED ENGINES
More detailed information on cylinder lubrication is available at

Winterthur Gas & Diesel, Switzerland.
Emissions
Tier II solutions for 2-stroke diesel engine
All Wärtsilä low-speed engines included in this booklet are fully
compliant with IMO Tier II NOX limits specified in Annex VI of the
MARPOL 73/78.
Tier III solutions for 2-stroke diesel engine
LOW PRESSURE DF SOLUTION
In order to achieve compliance with both the IMO Tier III NOX
standards and the requirements for SOX control, a variety of solutions
is theoretically conceivable, starting with the choice of fuel and fuel
system, including conventional and more advanced tuning concepts,
the addition of particular substances and, ultimately, the after-
treatment. Switching from liquid to gas fuel is a viable solution for
dealing with both challenges simultaneously. See the Wärtsilä 2-stroke
dual fuel section in this booklet for more details.
However, when considering liquid fuels only, various options need
to be taken into account, combining the individual solutions to control
the two key pollutants.
Pollutants Measure 1 Measure 2
SOX Low-Sulphur Fuel Scrubber
NOX SCR Engine internal measures (EGR)
87
SCR SOLUTIONS
SCR technology is based on the reduction of nitrogen oxides (NOX ) by
means of a reductant (typically ammonia, generated from urea) at the
surface of a catalyst in a reactor.
The temperature of the exhaust gas is thereby subject to constraints
both on the upper and the lower side. The latter is particularly an issue
with fuels containing higher fractions of sulphur, such as those present
in typical heavy fuel oil (HFO) qualities available today, which calls for
even higher minimum temperatures in the catalyst.
HIGH PRESSURE SCR
The SCR reactor is put on the high-pressure side, before the turbine.
Integrating the SCR reactor before the turbine allows the reactor to be
designed in the most compact way due to the higher density of the
exhaust gas.
Wärtsilä has developed and is systematically deploying high
pressure SCR solutions for the complete 2-stroke engine portfolio with
single and multi-turbocharger applications. Further, Wärtsilä allows
third party brand high pressure SCR suppliers to interface to the
engine provided interface specifications are met.
Reactor
Mixing pipe
Bypass
Collector pipe
LOW PRESSURE SCR

The SCR reactor is put on the low-pressure side, after the turbine.
Wärtsilä has developed a 2-stroke engine interface specifications
for low pressure SCR applications that complies with the known low
pressure SCR system providers. Low pressure SCR is typically larger
in volume and has the advantage of being less complicated to integrate
into the exhaust stream.
88
LOW-SPEED ENGINES
EGR SOLUTIONS
Additional to Tier III dual fuel and SCR solutions, exhaust gas
recirculating (EGR) concepts might be commercially viable for certain
applications. Wärtsilä 2-stroke is further developing this concept and
develops own EGR resolutions available upon request.
High-Efficiency Waste Heat Recovery (WHR)

Waste heat recovery is an effective technology for simultaneously
cutting exhaust gas emissions and reducing fuel consumption. High-
Efficiency Waste Heat Recovery plants can be installed with Wärtsilä
engines. This enables up to 10% of the main engine shaft power to
be recovered as electrical power for use as additional ship propulsion
power and for shipboard services. These WHR plants thus cut exhaust
gas emissions and deliver fuel savings of up to 10%.
Steam based WHR has already been successfully fitted in several
installations to Wärtsilä low-speed marine engines. In the WHR plant,
a turbo-generator combines input from a steam turbine and an exhaust
gas power turbine to generate electrical power, while steam from the
economiser is available for ship service heating. Steam based WHR is
recommended for vessels with high installed power.
Exhaust gas
economizer Ship service steam
Steam
turbine Ship service power
Exhaust
turbine
Aux. engines
Turbochargers
Motor/generator
Main engine
Schematic of a High-Efficiency Waste Heat Recovery plant typical for large

container ships.
89
EXHAUST GAS CLEANING
Due to existing regulations on
emissions to air from the International
Maritime Organisation (IMO), and with
the European Union working towards
an alignment with IMO MARPOL
Annex VI, marine industry operators
need to decide on the best means
for achieving compliance. Wärtsilä
exhaust gas cleaning technology is
an economical and environmentally
friendly solution for tackling all new
and existing rules and regulations.
The systems are suitable for both
new buildings and the retrofitting of
existing vessels having either 2-stroke
or 4-stroke engines, as well as for oil-
fired boilers.
Having the largest installed base
of any marine scrubber supplier and a
dedicated test laboratory has enabled
Wärtsilä to optimise their products to
be reliable, easy to operate, and easy
to install.

Scrubber System Designs
Wärtsilä has developed two kinds of
standard scrubber designs to better
meet the demands of our customers.
Wärtsilä can offer the conventional
venturi scrubber design, as well as the
more compact inline scrubber system.
Both scrubber designs have
benefits and drawbacks dependent
on vessel type and layout, so it’s
important to look at the specific
project needs. Both designs can be
utilized for open loop, closed loop and
hybrid scrubber systems.
90

Wärtsilä Hybrid Scrubber System
Wärtsilä provides hybrid scrubber system solutions which have the
flexibility to operate in both open and closed loop using seawater to
remove SOX from the exhaust. This provides a flexibility of operation in
low alkaline waters, as well as the open ocean.
When at sea the switch can be made to open loop using only
seawater. The sulphur oxides in the exhaust react with the water to
form sulphuric acid. Chemicals are not required since the natural
alkalinity of seawater neutralizes the acid.
When required to switch to closed loop, for instance whilst entering
a port in a low alkalinity area, the natural alkalinity of seawater is
boosted by an alkali which uses caustic soda (NaOH) as a buffer.
91

Wärtsilä Open Loop Scrubber System
The Wärtsilä open loop scrubber systems are designed to remove
SOX from the exhaust and operates utilising seawater. The open loop
scrubber system is our most straightforward scrubbing method. It
utilizes the natural alkalinity in seawater for scrubbing, and does not
need caustic soda. This method can be used in most seas around the
world, where alkalinity levels are high.
Exhaust gas enters the scrubber and is sprayed with seawater,
the SOX in the exhaust reacts with water and forms sulphuric acid.
Chemicals are not required since the natural alkalinity of seawater
neutralises the acid. Wash water from the scrubber is treated and
monitored to ensure that it conforms to MEPC 184(59) criteria and can
be discharged into the sea with no risk of harm to the environment.
92

Wärtsilä Closed Loop Scrubber System
The Wärtsilä closed loop scrubber system is designed to remove SOX
from the exhaust and operates utilising wash water. The system works
continuously in closed loop, which means no unnecessary concern
regarding sea water alkalinity levels and is best suited for full time
operation in low alkalinity areas (e.g. the Great Lakes).
In a closed loop scrubber system, the exhaust gas enters the
scrubber and is sprayed with sea water that has been mixed with
caustic soda (NaOH). The sulphur oxides in the exhaust react with this
mixture and are neutralised. A small bleed-off is extracted from the
closed loop and treated to fulfil IMO requirements. Cleaned effluents
can be safely discharged overboard with no harm to the environment.
If operation in zero discharge mode is requested, the effluent can
be led to a holding tank for scheduled and periodical discharge.
93
Standard scope of delivery

Optional or customer´s scope
Air unit (centralised)
Dosing unit
Control unit (centralised)

Wärtsilä NOX Reducer (NOR)
The Wärtsilä NOX Reducer (NOR) is an emission after-treatment
system based on the Selective Catalytic Reduction (SCR) technology
for Nitrogen Oxide (NOX) reduction. The system is compliant with
various NOX emission reduction needs, such as the IMO Tier III rules.
The NOR is optimized and validated for medium speed engines in
terms of reliability, flexibility and size. It is available for both newbuild
and retrofits and is compatible for operation on both distillate and
heavy fuel oils.
94
Soot blowing unit
NOR reactor
Mixing and
injection unit
Mixing duct
Urea tank
Compressed air
Pump unit
(centralised)
The main component of the NOR installation is the Reactor with a

soot blowing unit and the catalyst elements. Other modular essential
parts of the NOR system are a Urea pump unit, a Urea dosing unit, an
Urea Injection and mixing unit, an Air unit and the Control unit which
controls the NOR operation by monitoring engine parameters. For the
purpose of easy installation, several auxiliary units are centralized, so
that same units can be utilized in case of multiple NOR installations.
95
INERT GAS SYSTEMS
INERT GAS SYSTEMS
Wärtsilä is a market leader in the development, design, manufacture
and servicing of advanced inert gas and nitrogen solutions for marine
and offshore oil and gas applications.
Our leading-edge, customised solutions ensure high quality and
advanced levels of safety for vessels operating in regulated areas.
We are certified by ISO 9001:2000, ISO 14001:2004 and OHSAS
18001:2007.
Our strong reputation in inert gas solutions is based on over 50
years’ experience and unique full-scale R&D facilities located in Moss,
Norway. Our references include over 2 500 vessels installed with our
inert gas equipment. Performance testing of inert gas systems can be
executed in the company’s own test hall in Moss, the only facility tailor-
made for this purpose in the world today.
Wärtsilä Moss systems are vital systems to ensure a high level of
safety for vessels where they are installed. Consequently, product
quality is always the number one priority. All our systems are designed
based on compact modules, offering important savings in space
and installation cost both for newbuildings and for retrofit on existing
vessels.
Wärtsilä ensures our customers a global network for lifetime
support. This is vital to secure uninterrupted operation. Furthermore,
we also offer Service Agreements, product training (from our facilities
in Moss) and system upgrades to support our customers in their efforts
to optimize operational performance as well as cost. Our in-house
spare parts department will provide anticipated spares on short notice.

Wärtsilä Moss Nitrogen Generators
Wärtsilä Moss Nitrogen Generators are dependable outlets for nitrogen.
As the name implies, these systems are designed to generate, or
create, a dry, clean inert gas. The use of nitrogen generators eliminates
the problems associated with handling gas cylinders. Our nitrogen
generators are designed for their flexibility and efficiency.
Wärtsilä Moss Nitrogen Generators are also designed to deliver
various purities in the same system, giving our customers even greater
flexibility. We supply niche, supplementary, small volume systems
with capacities from 10 to 6 000 Nm3/h at purities from 95 to 99.9%
nitrogen.
96
For the offshore market, Wärtsilä Moss nitrogen generation systems
supply dry and oil-free inert gas for purging, pressurising, and
blanketing functions for various top site applications. These systems
consist of two 100% inlet air filters, a pre-heater with thyristor control,
separator membranes, an O2 analyser, UCP, and the controls and
instruments for safe and automatic operation.
The system is particularly suited for marine and offshore
applications, where the demand for high quality and challenging
specifications is present. We always adapt to our customer`s needs,
and are capable of installing our systems into the most challenging
locations.
97
INERT GAS SYSTEMS

Wärtsilä Moss Flue Gas
Flue gas systems are used to channel exhaust gases from a ships
boiler uptake.
Wärtsilä Moss flue gas systems are vital systems to ensure a high
level of safety for the vessels where they are installed. Consequently,
product quality is always the number one priority.
They are tailor made for use on board crude oil carriers and are
designed based on compact modules, offering important savings in
space and installation cost both for newbuildings and for retrofit on
existing vessels.
The system also uses a topping up generator making high inert gas
quality possible by a purposeful designed combustion chamber.
Benefits of the Moss design:
zz Unique concentric venturi scrubber design based on more than 50
years’ experience
zz Minimum space requirement
zz High efficiency
zz Low maintenance costs
zz Safe and easy operation
98

Wärtsilä Moss Mult-Inert™ system
The Wärtsilä Moss Mult-Inert system combines a flue gas system and
an inert gas generator to offer maximum flexibility onboard product
tankers transporting petroleum products.
Wärtsilä Moss Mult-Inert™ systems are vital systems ensuring a
high level of safety for use onboard tankers intended to carry both
crude oil and refined products, and combine into one compact unit
where quality is the number one priority.
The Wärtsilä Moss Mult-Inert™ system can run as an inert gas
generator or, when the boilers are in use, as a flue gas system. They
are designed based on compact modules, offering important savings
in space and installation cost for newbuild and retrofit vessels.
When discharging crude oil or less refined petroleum products,
our Mult-Inert™ Generator System can be run in flue gas mode as
the boilers are run to heat the cargo. The cargo is less sensitive to
contamination. When discharging more sensitive cargo, the system
can be switched to inert gas generator mode burning marine fuel.
99
INERT GAS SYSTEMS

Wärtsilä Moss Inert Gas Generators
for Gas Carriers
Our inert gas generator system, specialised for Gas Carriers, ensures
the correct atmosphere in the cargo tanks and pipes to minimize the
risk of explosion.
The system offers a high level of safety and are designed based on
compact modules, offering important savings in space and installation
cost for both newbuildings and retrofitting existing vessels.
Our most recent developments include higher capacity Wärtsilä
Moss inert gas generator systems for new and larger LNG carriers
requiring dry inert gas on-board, plus a combined inert gas system and
gas combustion unit (GCU). Our newly developed integrated solution
eliminates the need for a separate GCU and a safe and reliable gas
combustion mode is implemented using the same equipment as the
Wärtsilä Moss inert gas generator system.
Typical scope of supply

of an Inert Gas System
for gas carriers

Wärtsilä Moss Inert Gas Generators
for Tankers
Our inert gas generator system, specialised for Tankers, ensures the
correct atmosphere in the cargo tanks and pipes to minimize the risk
of explosion.
Our systems are designed to a high level of safety and are based on
compact modules, offering important savings in space and installation
cost both for newbuildings and retrofitting existing vessels.
100
Our most recent developments include automatic regulation based on
deck pressure setting. During off-loading the system optimizes the inert
gas production to only produce the necessary quantum of Inert Gas
to maintain the tank pressure. This system reduces oil consumption
providing cost efficiency, as well as an environmental benefit.
To stay ahead of regulations, we have also developed containerised
solutions which can easily be retrofitted on product & chemical tankers.

Wärtsilä Moss Offshore Inert Gas Packages
Our inert gas generator system ensures the correct atmosphere in
the cargo tanks and pipes to minimize the risk of explosion onboard
FPSOs and FSOs.
Based on more than 20 years of experience in the design and
manufacturing of inert gas generator systems, the Wärtsilä Moss
systems are known for their high inert gas quality and overall reliability.
High efficiency, low maintenance costs, and easy and safe
operation, in combination with minimum space requirements, are
important features of the unique design. The Wärtsilä Moss systems
can be installed on new builds or as retrofits for existing vessels.
Offshore Inert Gas Package solution for SPAR platform
101
OIL & GAS SYSTEMS
Using Flare Gas recovery solution will allow a safe and cost effective
recovery of gas that can be used for a wide range of purposes:
zz Export gas
zz Fuel
zz Re-injection into well
zz Feed for boilers
zz Recovered back to feedstock
zz Used in any other system which needs gas
Eliminating the need of continues flaring have many other positive

effects:
zz Substantially reduces emission of CO2 and NOX
zz Creates a safer and healthier working environment
zz Reduces noise from flaring
zz Reduces radiation from flaring
zz Increases flare tip lifetime, saving significant maintenance costs on
shutdown and flare tip replacement
zz Saves cost due to pollution taxation
102
GAS RECOVERY

Wärtsilä Flare Gas Recovery
The Wärtsilä Flare Gas Recovery System is designed to handle gas
that is normally flared during normal oil, gas, and petrochemical
installation operations.
Recovering flare gas allows:
zz Emissions to air to be reduced
zz A safer and healthier working environment
zz Increased profits thanks to cessation of flaring (taxes) and extended
flare tip lifetime.
The recovered gas can be used as fuel, export gas or for re-injection
into the well. The system can be tailored for different process
conditions and requirements (international, client and classification
society). It can also be combined with Wärtsilä’s hydrocarbon
blanketing system, the Wärtsilä GasReformer and Wärtsilä’s flare
ignition system.

Wärtsilä Flare Gas Ignition system
The Wärtsilä Flare Gas Ignition system is designed to handle gas that is
normally flared in oil, gas, and petrochemical applications.
The Wärtsilä Flare Gas Ignition system has been developed to
guarantee safe and reliable ignition of the flare whenever required.
The system combines high reliability and availability throughout the
lifetime of the facility. It features low maintenance requirements and is
easily retrofitted into existing installations.
More than one hundred low pressure ballistic pellet ignition
systems have been supplied by Wärtsilä worldwide for both offshore
and onshore projects.
103
OIL & GAS SYSTEMS
Our Hydrocarbon Gas Blanketing Systems are already used onboard

numerous projects in the North Sea and West Africa.

Wärtsilä Hydrocarbon Blanketing Systems
The Wärtsilä Hydrocarbon Blanketing System is designed to use
hydrocarbons as blanket gas for the cargo tanks during loading and
offloading of the oil.
Using hydrocarbons as blanket gas allows:
zz Reducing air emissions (hydrocarbons, CO2, CO).
zz Establishing a safer and healthier working environment by
preventing the vent gas from cargo tanks falling onto the main deck.
zz Increased profits thanks to reduced flashing of the oil during
loading.
The system can be tailored for different process conditions and
requirements (international, client and classification society). It can
also be combined with Wärtsilä’s flare gas recovery, the Wärtsilä
GasReformer, and Wärtsilä’s flare ignition systems.
104
GAS RECOVERY
The first VOC condensation system with zero emissions was installed on
the shuttle tanker Stena Alexita, operated by ExxonMobil in the North Sea
oil fields.

Wärtsilä Hamworthy VOC Recovery
Our field proven system is self-supplied with energy and results in zero
VOC emissions.
These emissions from the global sea transportation of crude oil and
associated products, account for a total of more than 5 million tonnes
per year. The Wärtsilä Hamworthy VOC plant ensures that cargo tank
pressures are maintained low enough to keep the vent valve closed.
This prevents VOC from being emitted to the atmosphere, and the
gas is instead fed to the VOC recovery module, where it is treated by
compression and condensation. The liquefied gas is then fed to the
VOC fuel tank.
We have also developed a system for VOC recovery in off shore
oil loading applications. It exceeds the Norwegian authorities’
requirements for Non-Methane Volatile Organic Compounds (NMVOCs)
by reducing VOC emissions by 100 per cent, including methane, which
is not currently specified in the regulatory requirements.
105
OIL & GAS SYSTEMS

Wärtsilä GasReformer
This solution makes it possible to utilise gaseous fuels that either
contain large amounts of heavier hydrocarbons or vary in their
composition. Gases that were previously considered as waste can
now be converted into a valuable resource of energy. Together with
Wärtsilä dual-fuel (DF) engines, this is the most efficient and flexible
solution for utilising associated gas, stranded gas, natural gas liquids,
LPG or volatile organic compounds (VOCs) recovered from oil and gas
industry.
The main application area is in offshore oil and gas production.
Wärtsilä GasReformer has been developed and designed to meet the
standards of the oil & gas industry and is the first of its kind in the
world.
The technology is based on steam reforming (SR), a catalytic
process known from the petrochemical industry and refineries, where
traditionally hydrogen is produced from various hydrocarbon feeds.
The Wärtsilä GasReformer exploits the same catalytic process but
operates under different conditions. In the Wärtsilä GasReformer
the methane number (MN) of any fuel gas is improved to 100 ± 5 by
converting the heavier hydrocarbons to synthesis gas (H2 + CO) and
finally to methane (CH4).
106
GAS RECOVERY
Environmental excellence
Offshore gas flaring is increasingly recognised as a major environmental
problem, causes 400 million tons of CO2 in annual emissions, not to
mention the valuable resources that go to waste.
The associated gas, separated from crude oil, is traditionally flared
and not utilised because it varies in composition, and contains a lot
of heavier hydrocarbons. Generally it is considered as waste or an
unreliable source of energy.
With the Wärtsilä GasReformer, this undesired gas can be reliably
and efficiently utilised by Wärtsilä dual-fuel engines. When utilising
associated gas or recovered VOCs as a reliable source of energy,
the operator can achieve self-sufficiency in terms of energy supply
and thus the need for fuel bunkering, a costly operation in offshore
locations, decreases. With an 8 MW Wärtsilä GasReformer combined
with a dual-fuel engine utilising associated gas, the operator can
reduce the need for bunkered fuel oil by about 35–39 tons per day.
With a Wärtsilä DF engine the system produces electricity with an
overall efficiency of up to 44.5%.
Key benefits
zz Reduction of CO2 and VOC emissions
zz Flare gas can be utilised for power production
zz No need for flaring
zz Reduced fuel consumption and fuel bunkering
zz Low NOX emissions from proven dual-fuel engines
zz Dual-fuel engines can operate at full load and efficiency
zz Operator can change gas source during operation
zz Decreased carbon footprint for operating company
Product Specification per 1 MW shaft power of DF engine

Pressure (design) 7–10 (11) barg
Temperature (design) 300-420 (500) °C
Feed gas (MN 50) mass flow rate 189 kg/h/MW
Feed gas volumetric flow rate 176 kg/h/MW
Total steam demand 220 kg/h/MW
of which recycled condesate water 170 kg/h/MW
of which fresh water 50 kg/h/MW
Cooling demand 150 kW/MW
Dimensions (mm) and weights (tonnes) Nitrogen

El. heater, consumption
GasReformer capacity Length Width Height Weight max (kW) start-up
(shut-down)
4 MW 5000 3000 3000 15 30 5 (20) Nm3
8 MW 5800 3500 3500 18.5 100 6 (27) Nm3
18 MW 7000 4800 4200 40 250 15 (60) Nm3
107
OIL & GAS SYSTEMS

Wärtsilä Cargo Handling
for small LNG Carriers
There is a growing demand for the small-scale transport of LNG to
end users that are located in areas where pipelines are not feasible or
economically viable. Typically, such end users are power generation
plants, land based industries, and suppliers of LNG as fuel for vehicles
or ships. Wärtsilä has developed a Cargo Handling System that
is designed from the extensive experience that Wärtsilä Oil & Gas
Systems has accumulated in delivering such systems for LPG, LEG
and LNG carriers. The scope available includes:
zz Cargo handling system
zz Boil-off gas handling
zz Cargo tank design and complete tank delivery
zz Ship design
zz LNG fuel supply system
We provide designs for small size LNG Carriers carrying LNG only, or
Multi Gas Carriers able to carry all types of gas cargo, including LNG.
Typically these ships are between 4 000 and 40 000 m3.

Wärtsilä Cargo Handling System
for Ethylene/Multi Gas Carrier
The ethylene carrier segment has grown during the last years, from
small size vessels to handy size, and now also includes a large-scale
carrier purpose built for ethane trading.
Wärtsilä Oil & Gas Systems has become the largest supplier of
complete cargo handling systems for vessels in this segment, covering
108
GAS CARGO HANDLING SYSTEMS
the whole range of sizes requested in the market today. These vessels
are known for their flexibility and can trade multiple types of cargoes
from gas to chemicals. Deliveries also include carriers with LNG
capacity and dual-fuel propulsion.
An increasing supply of ethane has created a new segment of
shipping, namely the trade of ethane as feedstock to the petrochemical
industry on a large scale. Wärtsilä Oil & Gas Systems is also delivering
complete cargo handling system to these very large ethane carriers.

Wärtsilä Cargo Handling System
for Fully Pressurized Gas Carrier
The largest fleet of Gas Carriers in the world is in the fully pressurized
segment. For fully pressurized vessels the cargo tank volumes are
typically in the range 1 000 m3 to 11 000 m3. Wärtsilä Oil & Gas Systems
offer modern solutions and advanced solutions for such vessels.
Fully pressurized vessels carry LPG at ambient temperatures, with
the corresponding gas pressure this gives. Cargo tanks are usually
able to handle a tank pressure of 18 bar(g).
Wärtsilä Oil & Gas Systems has developed the new QiCool Chiller
unit suitable for Fully Pressurized LPG ships.
QiCool allows increased loading of the cargo tanks and a possibility
to lower the design pressure for the cargo tanks thereby enabling
weight and cost savings to be achieved.

Wärtsilä Cargo Handling System for Fully
Refrigerated vessels
For many years already, Wärtsilä Oil & Gas Systems has been the
preferred cargo handling equipment supplier for many of the leading
owners of fully and semi refrigerated vessels. When transported
in these ships the LPG is normally kept at its coldest temperature
(atmospheric pressure) and the required equipment has, therefore, to
be extremely reliable. Our innovative and energy efficient solutions,
together with the broadest portfolio of reliquefaction configurations,
have given us a leading position in this market. This extensive offering
is supported by Wärtsilä’s unmatched global service network.
109
OIL & GAS SYSTEMS

Wärtsilä Ship and Cargo Tank Design
As a member of the Wärtsilä Group, we offer a ship design portfolio
that is among the most extensive in the industry. This portfolio includes
the design of Gas Carriers, for which we have focused on small to
handy size vessels with the possibility to tailor the appropriate final
design in cooperation with the owner and shipyard. Our services cover
the spectrum from conceptual studies to class approved designs.
Having the in-house resources to design C-type cargo tanks allows
us to be a complete partner for the building of Gas Carriers. Our IMO
C-type cargo tank designs include the cylindrical tanks, bilobe tanks,
and tanks for LPG FP (-10 °C), ethylene (-104 °C) and LNG (-163 °C).
110

LNG Receiving Terminals
Wärtsilä is a leading supplier of mid-scale LNG Receiving Terminals on a
turnkey EPC basis including storage tank, process equipment, civil works,
piping, control system, buildings, commissioning and startup. Keywords
for the systems are EPC, Comprehensive, turnkey, robust are flexible.
Wärtsilä is recognised for its market leading gas engine technology
as well as for its broad offering in gas handling systems. With the LNG
receiving terminals, Wärtsilä is combining its strong Power Plants EPC
capability with its industry leading LNG gas handling technology to
provide a turnkey LNG terminal solution. As LNG continues to replace oil
and other fuels worldwide, Wärtsilä sees strong global market potential
for medium-scale LNG distribution. The combination of market-leading
LNG technology, ship design, and gas-fired marine propulsion and power
plants enables Wärtsilä to take a leading role in end-to-end LNG systems.
Wärtsilä delivers complete LNG receiving terminals as turn key
projects on an EPC basis, which includes storing of Liquefied Natural
Gas (LNG) and converting it to gas before distributing it to a gas network.
The terminal includes a process plant, pipes, valves, instruments,
cables, control system, storage tank, electrical installation, civil works
and buildings.
The Receiving Terminals are normally designed to receive LNG from
LNG carriers, store it and redistribute it. The following functionalities are
often part of a receiving terminal:
zz Receiving LNG and storing it zz Ship bunkering and loading
zz Regasification of LNG zz BOG Reliquefaction
zz BOG handling zz Power and heat generation
zz Gas send-out zz Pressure control station and
zz Truck loading metering
111
OIL & GAS SYSTEMS
The Kollsnes II plant located near Bergen, Norway features a total gas
cleaning system supplied by Wärtsilä.

Wärtsilä LNG Small Scale LNG Liquefaction
BRAYTON NITROGEN CYCLE – THE RELIABLE SOLUTION FOR
SMALL SCALE LIQUEFACTION
Wärtsilä’s larger liquefaction plants are easy to operate, reliable, and
fully automated. They represent a low cost lifecycle solution in the
small to medium size liquefaction capacity range.
These liquefaction plants are based on the reversed Brayton
nitrogen refrigeration cycle. Nitrogen is the sole refrigeration medium,
and is used in a process of compressing and expanding the nitrogen
to obtain the required cryogenic temperature.
Main Technical data:
z Energy consumption: ~ 0.38 kWh/kg LNG
z Capacities between 60–800 tons/day
z Based on proprietary reversed Brayton technology
z Nitrogen (always in gas phase) as the refrigerant
z Smaller plants designed for unmanned operation
z Delivery time: 18–22 months.
Small scale liquefaction plants open new market opportunities

for the development of local or regional gas distribution
networks, where gases did not previously exist as an alternative
environmentally friendly and competitive energy source.
112
LNG SOLUTIONS
The biogas liquefaction plant was delivered to the municipality of Oslo. For
this plant, Wärtsilä has developed and delivered a CO2 mole sieve cleaning
stage.

Wärtsilä LNG Mini Scale Liquefaction
MIXED REFRIGERANT (MR) PROCESS – THE PERFECT SOLUTION
FOR BIOGAS LIQUEFACTION
Wärtsilä offers the energy efficient Mixed Refrigerant (MR)
liquefaction technology for low liquefaction capacities. Together
with our fast track engineering model, this technology results in low
investment costs and short manufacturing time.
The liquefier system uses mixed refrigerant technology, where one
single MR compressor and one aluminium plate-fin heat exchanger
(PFX) are the main components in the system. A standard glycol chiller
(pre-cooling unit) is incorporated to improve energy efficiency and to
ensure stable operation of the MR process.
Main Technical data:
z Energy consumption: ~ 0.7 kWh/kg LNG
z Capacities up to 50 tons/day
z Based on Mixed Refrigerant technology
z Designed for unmanned operation
z Space requirement for liquefaction system: 15 x 15 m2
z Delivery time: 12 months
z Standard capacities: 10, 17.5 and 25 ton LNG/day.
113
OIL & GAS SYSTEMS
Wärtsilä LNG Regasification

Our portfolio of LNG regasification technologies represents an industry
benchmark in terms of energy efficiency, robustness, and operational
flexibility.
Wärtsilä has delivered and commissioned numerous floating
LNG regasification plants based on either closed loop regasification
technology, using steam with water/glycol as the intermediate heating
medium, or open loop regasification technology using sea water with
propane as the intermediate heating medium.
We have also delivered modularised regasification plants for
jetty installations. These facilitate a much shorter construction time
compared to conventional land based LNG regasification terminal
projects.
114
LNG SOLUTIONS
Wärtsilä LNG Reliquefaction

Wärtsilä is a leading designer, developer and supplier of energy
efficient LNG Boil-Off Gas (BOG) reliquefaction plants. These systems
are designed to be efficient, reliable, safe, robust and flexible.
With 35 systems in operation and an additional 8 plants under
construction, Wärtsilä has the highest number of BOG reliquefaction
plants installed in the global LNG carrier fleet. Similar solutions could
also be installed with onshore LNG terminals.
We work closely with our customers to develop technological
solutions that meet their needs for increased fuel flexibility, energy
efficiency, and environmental performance in today’s fast changing
LNG market.
115
OIL & GAS SYSTEMS
Wärtsilä LNGPac™
Wärtsilä LNGPac™ is a complete fuel gas handling system for LNG
fuelled ships and includes the bunkering station, LNG tank and related
process equipment as well as the control and monitoring system. We
offer the LNG fuel system as a standalone product, as well as a part
of a complete propulsion system. Wärtsilä can deliver LNG systems
for propulsion and power generation for any applicable types of ship
or engine.
Standard solution
The standard Wärtsilä LNGPac™ uses an IMO type C LNG storage
tank. Bunkering takes place from the bunkering station to the LNG
tank via an insulated pipe. The tank connection space contains all
necessary process equipment and can be either mounted to directly
to the LNG tank or placed remotely from the LNG tank.
The main process equipment inside the tank connection space
ensures correct gas temperature for the engines and maintains
sufficient pressure inside the LNG tank. Wärtsilä is able to offer
solutions for both vacuum insulated storage tanks and single shell
storage tanks.
Customised solution
The LNGPac gas supply system can be customised to the needs of
each project on a case to case basis by Wärtsilä Fuel Gas Handling’s
expert team. We are able to conduct dedicated engineering at the
beginning of the project to match the specific operational requirements,
safety regulations, and the rules of each classification society.
116
FUEL GAS HANDLING
Features
Our new and innovative features have made the LNGPacTM to a
simple plug and play solution. The LNGPacTM includes the following
benefits:
INTEGRATED AIRLOCK
In the new LNGPac the Airlock is integrated with the Tank Connection
Space. This reduces the floor foot print, increases safety aspects and
makes the installation for the yard much easier.
INTEGRATED CONTROL CABINET
The Control Cabinet has also been integrated with the Tank Connection
Space. This innovation results in a dramatic reduction of interfaces
since the electrical cabling from the Tank Connection Space to the
external switchboards can be reduced to only a few cables.
INTEGRATED GAS VALVE UNIT (GVU)
The functional components of the GVU can be to be installed inside
the Tank Connection Space. By combining the LNGPac and the GVU
into a single, fully integrated system, considerable space can be saved.
The solution will also save installation time and costs for the yard.
REMOVAL OF THE HEATING MEDIA SKID AND PUMPS
The heating media skid is replaced by an intermediate heating
media circuit in the Tank Connection Space. The new circuit requires
no pumps and is able to directly utilize the engines’ cooling water.
Therefore fewer interfaces and installation work is required. With
less electrical consumers Wärtsilä is making ships even more
environmentally friendly.
117
OIL & GAS SYSTEMS
LNG quantity converter
118
FUEL GAS HANDLING
119
OIL & GAS SYSTEMS

Wärtsilä Vessel Internal
Electrostatic Coalescer (VIEC®)
The Wärtsilä Vessel Internal Electrostatic Coalescer (VIEC) is an field
proven solution for separation of water from oil, improving production
capacity, eliminating emulsion issues, reducing heating and chemical
dosage demand as well as space and weight requirements.
VIEC enables operators CAPEX and OPEX savings as well as being
a preferred tool for de-bottle necking and solving emulsion issues.
Concept
VIEC is a technology for enhancing liquid-liquid separation by using
alternating high voltage electrical fields.
Modular construction consisting of several electrodes, where
each electrode is electrically insulated and has its own dedicated
transformer for transforming a low voltage feed to high voltage.
Tolerates 100% water and 100% gas without short circuiting or
arcing, making it ideally suited for use in any three-phase separator to
speed up separation of water dispersed in oil and/or to resolve stable
oil-continuous emulsions.
Benefits Features
zz Increase crude oil production zz Fully insulated electrodes
capacity and low voltage
zz Reduce weight and space penetration and feeding
requirements zz Suitable for both new
zz Reduce cost of production fluid builds and retrofits
heating zz Installation through
zz Reduce consumption of chemicals 18”– 24” manhole
zz Improve heavy oil separation zz Field proven technology
zz Guaranteed separator performance zz UL and CE marked
(total BS&W output) equipment
120
OIL SEPARATION

Wärtsilä iPhase®
The Wärtsilä iPhase® profiler measures the oil-water interface,
providing accurate measurements of water conductivity and thereby
the oil in water profile inside hydrocarbon separators.
Several independent sensors are located above each other in order
to measure a vertical profile of the separator contents. Each sensor
measures the bulk properties of the surrounding fluid. The measurement
is conducted without electrodes and over a large volume which makes it
less sensitive to deposits.
The Wärtsilä iPhase® electronic module is located on the
top of the separator vessel and is connected to the Wärtsilä
iPhase® Measurement Rod, located inside the vessel.
It performs all calculations onboard and can directly be
accessed by the plant control system via MODBUS RTU or
4–20 mA signaling.
Measurement principle
The Wärtsilä iPhase® profiler measures the electrical
conductivity of the water/oil mixture surrounding each
sensor. Dispersed oil droplets are non-conductive
compared to the surrounding water. The overall conductivity
will therefore decrease with increasing concentration of
oil. The Wärtsilä iPhase® sensors utilize the conductivity
difference to provide the oil in water profile.
The conductivity is measured by setting up an electric
field and measure the current flowing. The electric field is an
induced field and is therefore very tolerant to deposits.
Features
zz Inductive measurement principle
zz Tolerant to deposits
zz High accuracy oil/water interface determination
zz Separator water profiling
zz Detection of sand build-up
zz Integrated temperature sensor
zz Intrinsically safe electronics
zz No active components inside vessel
zz Control system interface MODBUS RTU (RS485)
zz 4–20 mA for interface signaling
zz Certifications: ATEX Ex ia IIB T4, IECEX, EMC, UL
zz No export restrictions
121
OIL & GAS SYSTEMS
Wärtsilä Tank Control Systems

for Whessoe Products
If your product is LNG, LPG or ammonia, Wärtsilä Tank Control
Systems can provide an application-specific solution for your business
needs. Today, the liquid gas industry is driven by the economics of
operational scale. In order to apply efficient business management,
while adhering to stringent safety regulations, operations personnel
must have access to correct information.
Throughout the production cycle, from storage to distribution, the
availability of precise data is essential, and it needs to be relayed to the
control room in real time.
Whether your operation is large or small, our solutions are custom
designed to suit your requirements. They can operate independently,
or be interconnected within a plant-wide system. Our vast experience,
research, instrumentation technology, and service support will add
value to your business.
Marine gauging
LNG secondary tank gauging systems
zz World leaders in LNG marine gauging, more than 320 vessels
supplied worldwide
zz FLIV isolation valves
Product and chemical carriers

zz LPG level gauging
zz Alarm systems
zz Supervisory control and data acquisition system
122
TANK CONTROL SYSTEMS
Land gauging Whessoe rollover predictor
Opc link (alarms, data)
Ethernet
DCS operator network
workstation
DCS controller
Serial link (process data)
– I/O modules
Liquefied natural gas (LNG)

Total LNG tank gauging system
Our total LNG storage tank instrumentation solution comprises the
following, fully integrated system components:
z SIL-3 certified servo level gauges
z High/high level alarm gauges
z Product temperature probes
z Fully automatic LTD gauges
z Leak detection and cooling temperature transmitter system
z PC based SCADA package
z Roll-over predictive alarm software
z LNG sampling system.
The entire system communicates via a redundant communication link.
Liquefied petroleum gas (LPG)

Wärtsilä Tank Control Systems lead the industry in liquefied gas storage
instrumentation and safety systems. We offer complete pressurised
tank solutions for LPG and liquefied chemical gases (vinyl chloride,
ethylene, propylene, butadiene, ammonia, etc.). These include level
gauging or safety shut-off valves systems with hydraulic panel remote,
that enable the full protection, control, and supervision of the storage
plant.
Wärtsilä Tank Control Systems is a key player in LPG cavern
storage applications. We have developed, in close collaboration with
key customers, a unique and dedicated range of products that meet
the specific needs of this type of storage.
123
PROPULSORS & GEARS
WÄRTSILÄ GEARS
Wärtsilä gears have been designed to meet the highest standards of
operational efficiency, reliability and low noise and vibration.
Gear configurations
zz Single input gears: gears with single input and single propeller
speed. Wärtsilä designation SCV for vertical offset, and SCH for
horizontal offset. Available with or without clutch.
zz Double gears: gears with twin input and single propeller speed.
Wärtsilä designation TCH.
zz 2-speed gears: gears with single input and 2 propeller speeds.
Wärtsilä designation SCV/2 for vertical offset, and SCH/2 for
horizontal offset.
All Wärtsilä gears can be supplied with built in multi-disc clutches.
Power take-off (PTO)
All Wärtsilä gears can be supplied with one or more PTOs for driving
the shaft alternator, compressor or pump. For single vertical and
horizontal gears, the standard PTO is primary driven. For double gears,
the PTO is optionally primary or secondary driven.
zz A primary driven PTO is rotating whenever the engine is rotating.
zz A secondary driven PTO is rotating whenever the propeller shaft
is rotating.
Power take-in (PTI)
Most Wärtsilä gears can be supplied with a combined PTO/PTI. In PTI
mode the shaft alternator can also be used as an electric motor.
PTI is normally used for the following operation modes:
zz PTI “Booster” mode is used when the main power of the engine is
too small, in order to increase the total propulsion power. For this
mode, no clutches are required on the gear.
zz PTI “Take me home” mode is used in case of emergency, if the prime
mover is out of operation. For this mode a minimum of 2 clutches are
required on the gear.
Integrated or separate hydraulic system for gear and
controllable pitch (CP) propeller
Most Wärtsilä gears are purpose-designed with an integrated hydraulic
system for both the gear and the CP propeller. As the separate hydraulic
power unit for the CP propeller is superfluous, both installation costs
for the yard and operational costs for the owner are reduced. For safety
reasons the gear mechanically drives the main pump for the propeller.
All gears can also be interfaced to a separate hydraulic power unit.
124

Wärtsilä 2-speed gear
The Wärtsilä 2-speed gear is designed to serve vessels having multiple
operational modes or reduced transit speed. In particular, RoPax
ferries, offshore support vessels, tug boats and fishing vessels can
gain notable economic and environmental benefits. Also single screw
vessels with redundant propulsion system (“take me home system”)
will benefit from this gear type.
By operating the ship’s propeller at low speed when maximum
vessel speed or propeller thrust is not required, fuel consumption can
be reduced by as much as 15 percent compared to a single mechanical
propulsion system. At the same time, nitrogen oxide (NOX) and sulphur
oxide (SOX) emissions are similarly lowered.
Benefits
zz Fuel consumption and exhaust gas emissions reduced
zz Reliable performance with low transmission losses
zz Acts as a systems enabler for vessels with variable operational
modes and/or a need for a redundant propulsion system
zz Two selectable propeller speeds at 100% engine speed
zz Provides efficient utilisation of the main engine
zz PTO power 100% of the engine power
zz PTO power uninterrupted when changing propeller speed
zz Reliable and simple to operate with mode changes from the bridge
zz Lower noise levels for onboard comfort and ecological friendliness
125
PROPULSORS & GEARS
Single input gears, vertical offset, dimensions (mm)
tonnes*
Gear B
Weight
O
type/ A Std- C D E F G H J L N SCV/SV
size Max
SCV38 380 290 1305 115 465 1000 750 530 340 538 230 650 2.1
SCV42 420 320 1435 125 510 1500 830 585 530 558 255 715 2.7
SCV46 460 350 1570 140 560 1580 910 640 570 595 280 785 3.4
SCV50 500 380 1724 150 590 1340 1024 720 470 592 420 1035 4.2
SCV56 560 410 1848 160 645 1500 1110 800 530 650 450 1100 6.0
SCV62 620 440-470 2210 180 740 1580 1240 880 570 662 350 1150 7.0
SCV68 680 460-510 2370 200 800 1720 1360 960 625 720 370 1250 8.5
SCV75 750 480-530 2460 220 880 1850 1480 1040 660 800 450 1300/1095 10.0
SCV85 850 510-560 2720 250 1000 2100 1680 1178 730 915 550 1470/1220 14.5
SCV95 950 580-630 3025 280 1145 2350 1880 1327 800 1025 450 1640/1350 20.0
SCV105 1050 600 3328 250 1124 2628 2192 1668 1410 624 618 970 26.0
SV112 1120 600 3550 260 1198 2804 2272 1772 1500 660 615 800 29.0
SCV112 1120 700 3650 260 1198 2804 2272 1772 1500 660 595 1800 31.0
SV118 1180 600 3610 300 1190 2824 2268 1758 1520 716 615 827 32.0
SCV118 1180 700 3710 300 1190 2824 2268 1758 1520 716 595 1800 35.0
SV125 1250 600 3805 300 1325 2954 2396 1888 1600 808 615 860 35.0
SCV125 1250 700 3905 300 1325 2954 2396 1888 1600 808 595 1950 38.0
SV132 1320 600 3940 300 1390 3084 2516 2018 1630 850 615 875 38.0
SCV132 1320 700 4040 300 1390 3084 2516 2018 1630 850 610 2020 42.0
SV140 1400 600 4250 350 1500 3250 2600 2150 1700 900 720 920 44.0
SCV140 1400 700 4350 350 1500 3250 2600 2150 1700 900 680 2200 47.0
* Not binding
126
SINGLE INPUT GEARS
Single input gears, power range
Single input gears, horisontal offset, dimensions (mm)
tonnes*
Gear O
Weight
type/ A B C D E F G H I J K L N SCH/
size SH
SCH68 680 510 0 100 700 2000 840 650 515 570 1095 730 500 1245 10
SCH75 750 530 15 280 885 2230 1220 865 735 660 1115 800 515 1670 12.5
SCH85 850 580 15 320 1000 2495 1440 970 830 730 1245 915 550 1800 16.5
SCH95 950 580 15 450 750 2710 1520 2250 830 1215 1420 540 700 1640 21
SCH105 1050 630 20 500 771 2995 1658 2195 910 1405 1545 560 750 1700/ 30
1510
SCH116 1160 670 20 550 850 3300 2240 2500 1015 1535 1715 725 830 1100/ 40
1800
* Not binding
127
PROPULSORS & GEARS
Wärtsilä gear type SCV132
Wärtsilä gear type TCH370-S63
128
DOUBLE INPUT GEARS
Double gears, dimensions (mm)
Gear Weight
type/ A B C D E F G J M N O tonnes*
size
TCH190 1900 460 10 320 980 2750 890 555 2300 360 995 15
TCH240 2400 490 20 450 1315 3580 1455 730 3135 570 1220 20
TCH250 2500 530 12.5 450 1400 3700 1150 800 3230 570 1290 28
TCH270 2700 580 10 500 1330 3900 1690 880 3410 600 1560 28
TCH350 3500 580 10 700 1855 5370 1630 1270 4380 790 2140 50
TCH370 3700 630 10 700 1855 5565 1645 1270 4580 880 2140 60
* Not binding
TCH type
Double gears vs Wärtsilä engines

Gear Engine Engine type
type offset (mm)
TCH190 1900 Wärtsilä 20
TCH240 2400 Electric motors
TCH250 2500 W26 (L-version)
TCH270 2700 W32 (L-version) and W34DF (L-version)
TCH350 3500 W12V32, W6L46F, W6L50DF
W16V32, W18V32,W8L46F, W9L46F, W8L50DF, W9L50DF,
TCH370 3700 W12V34DF, W16V34DF
Please verify engine offset given in the latest engine product guide, ch 18.1 “Crankshaft distances”
129
PROPULSORS & GEARS
2-speed gears, vertical offset, dimensions (mm)
Gear type/ Weight
A B C D E F G H J L N O
size tonnes
SCV80/2-P54 800 540 2680 220 880 1960 1580 1150 660 800 580 1325 14
SCV90/2-P58 900 580 2760 250 1075 2210 1800 1300 730 915 650 1350 17
SCV100/2-P68 1000 680 3350 260 1100 2500 2000 1470 800 1036 915 1800 24
SCV112/2-P68 1120 680 3500 260 1200 2805 2320 1772 1500 665 900 1800 34
SCV118/2-P68 1180 700 3700 300 1200 2800 2320 1750 1520 715 1050 1800 38
2-speed gears, horisontal offset, dimensions (mm)

Gear type/ A B C D E F G H J L N O Weight
size tonnes
SCH80/2-P54 800 540 15 220 700 2450 1050 950 660 800 580 1325 15
SCH90/2-P58 900 580 15 260 820 3000 1160 1130 730 985 650 1350 19
SCH100/2-P68 1000 680 15 260 840 3180 1870 1240 800 1036 915 1800 27
SCH112/2-P68 1120 680 15 260 950 3200 1950 1400 665 1500 1735 965 38
SCH118/2-P68 1180 700 15 300 1000 3500 1650 2000 1520 715 1050 1800 40
Vertical offset
Horisontal offset
130
2-SPEED GEARS
2-speed gears, power range
Wärtsilä gear type SCV90/2-PDC58
131
PROPULSORS & GEARS

Wärtsilä Controllable Pitch Propeller Systems
Wärtsilä Controllable Pitch (WCP) propeller systems provide excellent
performance and manoeuvrability, and are recommended for vessels
with frequent sailing routes that involve multiple operating conditions.
These can be, for example, vessels requiring full power in both bollard
pull and free-sailing conditions, or that make frequent port calls. WCP
propeller systems can also be applicable for vessels that encounter
varying weather conditions demanding operational requirements,
such as dynamic positioning. A controllable pitch propeller is often
the choice for installations with a shaft generator operating at constant
rotational speed. Full propulsion power is available in both heavy
and light conditions through an automatic pitch adjustment. Engine
overload is avoided regardless of the conditions.
The WCP propeller system is the ideal choice for diesel-mechanic
Propulsion with both medium-speed and low-speed diesel engines.
By integrating a suitable gearbox and Power Take Off / In the WCP
propeller system can be transformed into a hybrid propulsion system
that enables:
zz High operational efficiency
zz A power boost mode
zz Or emergency propulsion power
Hydraulic
system
Control panels Automation
Hub and blades
Shaft and stern tube system
Gear
Simplified sketch of a WCP propeller system
132
WCP PROPELLER SYSTEMS
A Wärtsilä Controllable Pitch (WCP) propeller system is a fully
customized combination of a hub, propeller blades, shafting,
hydraulics and a control system, as well as any further accessories
needed to meet the customer’s needs. Wärtsilä hydrodynamic experts
tailor the propeller for each application to achieve the respective fuel
consumption and comfort level targets as set by the customer.
Technical data
Power range starting at 1 000 kW, no upper limit
z 4- or 5-bladed propellers starting at a diameter of 1 200 mm
z Bronze or stainless steel propellers
z Various hub types can be selected, depending on the application
z Compliant with all ice classes
z Available with Wärtsilä High Performance nozzle
Options
z EPA General Vessel Permit 2013 compliance
z Zero pollution stern tube
z Under water replacement of propeller blades
z Full blade feathering for reduced drag
z Navy requirements for low noise signature
z Energopac rudder for increased efficiency
Latest innovative hub design
133
PROPULSORS & GEARS

Wärtsilä Fixed Pitch Propellers
Wärtsilä fixed pitch propellers are manufactured by the Wärtsilä CME
Zhenjiang Propeller Co.,Ltd joint venture company. At this facility fixed
pitch propellers with diameters from 1 m to 12 meters and up to 120
tons weight can be produced. As at the end of 2014, more than 2 000
propellers have been produced since the joint venture company was
established in 2004. Furthermore, it is able to take advantage of the
extensive experience and databases of LIPS and Wärtsilä with regard
to propeller design and production technology.
The propeller and shaft line design tools are based upon long
experience with calculations, model test results, Computational Fluid
Dynamics (CFD), and full scale results.
Propeller efficiency, noise and vibration requirements are the main
considerations for propeller designs that can be applied for a wide
variety of speeds and power densities, and for any type of ship. The
unique Wärtsilä Cunial® propeller material provides excellent casting,
machining and fatigue properties.
134
FIXED PITCH PROPELLERS
Replacement Propellers
Wärtsilä’s extensive design knowledge and modern design tools can
enable significant efficiency increases when retrofitting propellers.
Existing propellers that are based on older design principles or
different working conditions, such as slow steaming, can be replaced
to reduce the fuel oil consumption. Efficiency improvements up to
15% are possible.
EnergoProFin
The Wärtsilä EnergoProFin is a propeller cap with fins, rotating together
with the propeller, that can provide fuel oil savings from 2 to 5%.
The EnergoProFin improves propulsive efficiency by weakening
the hub vortex. Installing the Wärtsilä EnergoProFin can increase the
overall propulsion efficiency up to 5% with a payback time of less than
one year. The EnergoProFin can also be applied to reduce propeller-
induced noise and vibrations.
The Wärtsilä EnergoProFin is suitable for all new build and existing
vessels with fixed pitch propellers.
135
PROPULSORS & GEARS

Wärtsilä Built-Up Propellers
The Wärtsilä Built-Up Propeller (BUP) is an attractive alternative for a
monobloc propeller. The easy (de)mountable blades and the possibility
of under water (de)mounting enable the propeller blades to be replaced
or repaired without interruption to the normal operating service.
The built-up propellers are supplied in stainless steel or bronze.
Connections towards the propeller shaft is with a flange and fit bolts.
Most built-up propellers are delivered with 4- and 5-blades propellers,
but 6-bladed propellers can also be delivered on request. There are no
propeller diameter or weight limits. The flush and compact hub design
in combination with efficiency optimised propeller blades makes the
BUP fit for applications were low fuel consumption is important.
Built-up propellers are typically installed on ice-breakers and
offshore patrol vessels that operate in ice infested waters or operational
areas with increased risk of propeller damage. Long interruptions of
the vessel operating schedule are avoided due to the fast (under water)
replacement of blades. Limited replacement time enables the vessel
to maintain its schedule, which is beneficial for vessels with a fixed
operating schedule such as cruise vessels and ferries.
136
FP PROPELLERS

Coastal and Inland Waterways Propellers
Coastal and inland propulsion systems are specialized for vessels
operating on local waterways, and for coastal and fishing vessels.
Wärtsilä has considerable expertise in designing propulsion systems
for large, fast luxury yachts and government-owned ships as well as
a variety of special vessels, all with their own characteristics. Wärtsilä
supplies fixed pitch propellers, nozzles, and propeller shaft assemblies
complete with stern tube systems as part of the propulsion equipment
for such vessels.
Coastal and Inland Waterway Propellers are available in bronze
or stainless steel. They are tailor-made with 3, 4, 5, 6 or 7 blades.
The accuracy can be according to ISO class II, I or S. Wärtsilä has
the capability to deliver fixed pitch propellers for any diameter above
1 000 mm, although for the coastal and inland waterway segment they
are seldom larger than 3 500 mm.
137
PROPULSORS & GEARS

Wärtsilä High Performance Nozzle
Fitting a nozzle increases the thrust at relatively low ship speeds.
This allows for significant savings to be achieved in terms of fuel
consumption, depending on the number of revolutions and the
capacity of the engine. The improved Wärtsilä High Performance
nozzle, type HP nozzle, when combined with Wärtsilä propellers, can
provide up to 5% more thrust than conventional nozzles in bollard pull
condition. The nozzle profile offers a double profiled cross section at
the inlet side of the nozzle.

Wärtsilä Energopac
Energopac is the optimised propulsion and manoeuvring solution for
coastal and ocean going vessels. The key objective is to reduce the
vessel’s fuel consumption by integrating the design of both propeller
and rudder. Each Energopac is designed to fit the intended vessel
and to meet its specific requirements; this allows Energopac to be
optimised fully for energy efficiency, whilst not compromising on either
manoeuvrability or comfort levels.
z Improved propulsive energy efficiency
z Reduced fuel consumption
z Excellent maneuverability
z Lower vibration levels and higher on-board comfort
z Reduced levels of emissions
z Integrated propeller and rudder design
138
NOZZLES AND RUDDERS
Fuel savings
Energopac reduces fuel consumption because it effectively reduces
the flow separation behind the propeller hub. Extended studies show
that for the same course-keeping capabilities, Energopac will create
less drag than conventional rudder systems.
Typical applications
Energopac can effectively reduce the operational costs for any vessel
with a considerable share of free sailing time in its operational profile. It
works very well for propellers with a relatively large propeller hub. The
potential savings are large for vessels with highly loaded controllable
pitch propeller systems, such as Ro-Ro vessels, ferries, container/
multipurpose vessels, and vessels with an ice class notation. In
addition to controllable pitch propeller applications, Energopac can
also be applied on vessels with fixed pitch propellers.
Cost savings
The reduction in fuel consumption depends very much on the vessel
type, its operational profile, and on the reference propeller and rudder.
For any application, the power savings can be estimated by Wärtsilä.
The estimate is based on the vessel design, its operational profile and
other requirements. Proven savings in the power required for a vessel’s
trial speed vary between 2–9% with Energopac.
139
PROPULSORS & GEARS
WÄRTSILÄ STEERABLE THRUSTERS
Wärtsilä steerable thrusters are available in different series covering a
wide range of customer needs.
Specific configurations, such as the retractable thruster series
and underwater mountable thruster series, are based on the reliable
designs from the standard steerable thruster series. Together they
form a steerable thruster range that is covering the most advanced
ship design options.
The Wärtsilä Thruster series:
zz Steerable Thrusters
zz Retractable Thrusters
zz Under Water Mountable Thrusters
Wärtsilä Steerable Thrusters

The Wärtsilä Steerable Thruster (WST) series is intended for tug or
offshore support vessel (OSV) application and river-sea going vessels.
These thrusters have a light ice class capability and can be combined
with hi-speed engines up to 1 800 rpm. Two nozzle types can be
selected depending on customer requirements: a bollard pull nozzle or
a nozzle optimised for free-sailing.
Wärtsilä Compact Thrusters (LCT) are a proven and compact
solution for tugs and similar vessels. The LCT series is gradually
being replaced by thrusters from the WST series, which have been
introduced at the end of 2013.
Wärtsilä Retractable Thrusters
Wärtsilä Modular Thrusters (LMT) with a modular and flexible design
are the basis for the retractable thrusters up to 4 500 kW.
Wärtsilä Underwater Mountable Thrusters
The Wärtsilä underwater mountable thrusters with designation WST
underwater mountable series have been introduced in 2013. The WST
underwater mountable thrusters come with several added features,
such as an increased power range, an 8° tilted propeller gearbox,
and the Wärtsilä Thruster Nozzle providing a superior and reliable DP
performance. The underwater mountable thrusters from LMT series
are available for the lower part of the power range.
Special thruster designs
The LMT thrusters are also used in special thruster designs, such
as inboard demountable thrusters or Z-drive configurations above
3 000 kW. The LMT series can be applied in a wide range of offshore
applications.
140
STEERABLE THRUSTERS
Thruster Engine power (2) Engine speed Propeller Propeller Bollard pull (1)
type (kW) (rpm) speed (rpm) diameter (mm) (tonnes)
900 1600 30
WST-11 348
1050 1800 36
1150 1800 39
WST-14 1275 320 1900 43
1350 2000 46
1400 2000 47
WST-16 1000 277
1600 2200 55
(750/1800)
1700 2200 57
WST-18 255
1800 2400 63
2050 2400 69
WST-21 243
2100 2600 73
2400 2600 80
WST-24 225
2400 2800 84
2800 2800 94
WST-28 218
2800 1000 3000 97
3200 (720/1200) 3000 107
WST-32 200
3200 3200 110
1) Based on two installations, 100% power, nozzle designed for bollard pull and 2% thrust deduction
2) Selections are valid for classification without ice class
Key benefits
zz Superior hydrodynamic performance for high bollard pull or maximum
propulsion efficiency
zz Compatible with high speed engines (up to 1 800 rpm)
zz Compact dimensions with a high level of integration
zz Robust design for reliable operations
zz Maintenance friendly design to minimize downtime
zz Reduced number of external connections and field bus connections for
ease of installation
zz Wärtsilä ProTouch controls with ergonomic levers and intuitive touch screen
displays
Options
zz Diesel-mechanical Z-drive configuration compatible with engine speeds
ranging from 720 rpm to 1 800 rpm (intermediate ratio’s available on request)
zz Integrated power take off for steering, lubrication, clutch and pitch
hydraulics (Diesel Mechanical variant)
zz Diesel-electric Z-drive configuration with electric steering and auxiliary
systems
zz 2 propeller diameters per size (3 diameters for WST-14)
zz FP propeller and integrated medium duty clutch (slipping range up to 50%
engine rpm) or CP propeller with dry on/off clutch
zz Two nozzle types: optimized for bollard pull or free sailing (FP propeller only)
zz Finnish-Swedish (Baltic) ice class up to 1B, Russian (RMRS) ice class up to
Ice-3 or equivalent Russian river register (RRR) ice class
zz EPA VGP 2013 compliance
zz Multiple installation options: bolt-in, weld-in, can-mounted or split
installation.
141
PROPULSORS & GEARS
WST-14 FP
Wärtsilä Steerable Thrusters dimensions (mm)

Thruster Weld-in Bolt-in PAL Weight (1)
A
type B D (kg)
1600
WST-11 1750 2000 2400/2700 10000/11800
1800
1800
WST-14 1750 2000 2500/2800 10900/12860
2000
2000
WST-16 2100 2400 2750/3100 17050/20400
2200
2200
WST-18 2100 2400 2900/3250 18600/21950
2400
2400
WST-21 2250 2600 3250/3500 24800/27500
2600
2600
WST-24 2450 2800 3500/3800 28500/31500
2800
2800
WST-28 2625 3055 3925/4200 32800/36100
3000
3000
WST-32 2800 3200 4000/4500 37000/41000
3200
1) Estimated minimum (FPP and smallest prop / nozzle / PAL )
and maximum (CPP and biggest prop / nozzle / PAL) weights
142
STEERABLE THRUSTERS
Wärtsilä Compact Thrusters
Engine Engine Propeller Propeller Bollard pull (1)
Thruster Reduction
power speed speed diameter
type ratio (tonnes)
(kW) (rpm) (rpm) (mm)
1600 33
LCT FS/CS175 1080 1000 2.770 361
1800 36
1900 40
LCT FS/CS200 1200 1000 3.447 290
2100 42
2100 52
LCT FS/CS225 1600 1000 3.650 274
2300 55
2400 61
1800 1000 3.895 257
2600 63
LCT FS/CS250
2400 67
2040 1000 3.895 257
2600 69
2500 80
LCT FS/CS275 1000 4.084 245 2600
2600 (2) 83
2800 90
2720 1000 4.592 218
3000 93
LCT FS/CS300
(2) 2800 95
2600 1000 4.592 218
3000 99
1) Based on two installations, 100% power, nozzle designed for bollard pull and 2% thrust deduction
2) Indicated values are maximum power levels available on request
Wärtsilä Compact Thrusters range
Key benefits Options

zzThe weld-in stembox provides easy installation Two different propeller diameters.
zz
and maximum stiffness of the construction in Controllable pitch propeller (CS type) or fixed pitch
zz
the vessel propeller (FS type)
zzThe can-mounted thruster provides the possibility Propellers in nozzle or open propeller.
zz
to install or remove the thruster while the ship
Weld-in stembox or can-mounted.
zz
is afloat
Soft on/off clutch or modulating clutch (Z-drive).
zz
zzThrusters with controllable pitch propellers (CPP)
and soft on/off clutch are suitable for vessels with Diesel Electric L-drive or Z-drive available on
zz
multiple operation modes and power-take-off request
(PTO) or fire-fighting (FiFi) requirements
zzThrusters with fixed pitch propellers (FPP) are
available with low duty (LD) or heavy duty (HD)
modulating clutch (MCD). LD modulates between
0 and idle engine speed. HD modulates between 0
and maximum engine speed and can be combined
with FiFi requirements
143
PROPULSORS & GEARS
Wärtsilä Retractable Thrusters
Thruster type 175 200 225 250
Power (kW) 1000 1200 1500 1600 2000
Frequency (Hz) 50 60 50 60 50 60 50 60
Input speed (rpm) 1000 1200 1000 900 1000 900 750 720
Propeller diameter (mm) 1700 1900 2100 2400
Propeller speed (rpm) 378 380 341 307 302 308 276 265
Thrust at zero knots
With nozzle (kN) 165 200 260 320
The information in the table is valid for L-drive configurations
Thruster type 1510 2500 2510 3500

Z-drive (kW) 2145 3065 3250 3650 4500
Power (rpm) 1200 900 900 900 720
(input speed) L-drive (kW) 2435 2490 2850 3850 4500
(rpm) 720 720 720 720 470
2800 3000 3400
Propeller diameter (in nozzle) (mm) 2500 3000 3200 3600
Other input speeds and power levels available on request
Remarks
The propellers are designed for bollard pull condition at 100% MCR power level and valid for uni-directional
Dynamic Positioning (DP) application.
Final selection depends on the chosen classification society. Selections are not valid for classification with
ice class.
Benefits
zz Fast retraction and deployment
zz Fully retracted during transit; optional hull closing plate
zz High thrust performance from the 3° tilted Wärtsilä HR Nozzle
zz L- and Z-drive options enable integration in a wide range of vessel types
and sizes
Options
zz 2 propeller diameter options (2500/2510/3500 type only)
zz L- and Z-drive with horizontal floating shaft and quick connect clutch
zz Fixed pitch (FP) or controllable pitch (CP) propeller (types 175/200/225/250
only)
zz 3° tilted nozzle (standard) or 0° nozzle
zz Hull closing plate
Wärtsilä Retractable Thrusters range
144
RETRACTABLE THRUSTERS
Dimensions (mm) Weight (2)
Thruster type Hmin (1) motor
A B C D E F L-drive height (tonnes)
LMT FS/ FS 2700 18

1700 2950 4050 2200 2400 7700 1850
CS175MNR CS 2850 19
LMT FS/ FS 2850 20
1900 3050 4160 2450 2700 8600 1900
CS200MNR CS 3000 21
LMT FS/ FS 3300 22
2100 3590 4625 2650 3000 9000 2000
CS225MNR CS 3450 23
LMT FS/ FS 3710 34
2400 3666 4625 3000 3370 10000 2200
CS250MNR CS 3710 32
1) Minimum total height of the thruster unit depends on the selected electric motor
2) Indicative weight for L-drive execution excluding the E-motor and oil, actual weight can vary depending on
project specific customizations
Dimensions (mm) Weight (2)

Thruster Hmin
PAL Estimated
type A B (1) C D E F Z- motor tonnes
L- Z-
drive drive drive height
LMT FS1510 2500 3570 3695 4745 3200 3714 10960 8756 6894 2160 55000
MNR
LMT FS2500 2800 4900 4200 4805 3800 4465 12960 11400 8383 2195 110000
MNR
LMT FS2510 3200 4900 4500 4805 4105 4770 14460 11573 8854 3150 110000
MNR
LMT FS3500
3600 5845 4770 4770 4720 5540 16745 14232 10372 3190 132000
MNR
1) Dimension includes space for nozzle removal
2) Indicative weight for Z-drive execution excluding the E-motor and oil, actual weight can vary depending on
project specific customizations
LMT FS/CS175-200-225-250MNR LMT FS1510-2500-2510-3500MNR
145
PROPULSORS & GEARS
Wärtsilä Underwater Mountable Thrusters
Main technical data
Power (1) Input speed Propeller
Thruster type Tilt
(kW) (rpm) diameter (mm)
LMT FS1510NU 2435 720 2600 3° (2)
LMT FS2500NU 3250 556 3000 3° (2)
LMT FS2510NU 3500 539 3200 3° (2)
4000 720
WST-45U 3600 8°
4500 600
4500 720
WST-55U 3900 8°
5500 600
5500 720
WST-65U 4200 8°
6500 600
1) The power level is for dynamic positioning (DP) operation
2) Tilted nozzle
Dimensions (mm) Weights (kg)

Outboard part (2) Recept-
Thruster type A B C D E F G H (1)
(3) R
dry in water acle
LMT FS1510NU 2600 1936 1045 1642 1900 900 1188 1000 1350 19000 16920 2170
LMT FS2500NU 3000 2123 1270 1883 2287 900 1285 1000 1550 30200 26710 3055
3200 2194 1270 1968 2288 900 1285 1000 1550 32200 28470 3055
LMT FS2510NU 3000 2123 1266 1911 2220 900 1347 1000 1550 30000 26410 3055
3200 2194 1266 1911 2220 900 1347 1000 1550 31800 27780 3055
Outboard part (2)
Thruster type A B C M L H Well (4)
dry in water
WST-45U 3600 3300 2518 2324 2570 1242 51000 34500 9500
WST-55U 3900 3625 2648 2516 2763 1390 63500 41800 11900
WST-65U 4200 3820 3006 2719 3025 1390 77500 49500 13200
All weights and dimensions for 3° tilted nozzle (1510 through 2510 type) or 8° tilted propeller shaft
(WST-45/55/65U type)
1) options: 1200, 1600, 2000, 2400; project specific lengths on request
2) Indicative weight, with oil
3) including pipe covers and valve
4) Including top cover, bottom cover, pipe covers, valves and position sensor
Key benefits
zz Exchangeable underwater for vessels that do not have access to dry
docking facilities
zz High bollard thrust and propulsion efficiency
zz Effective DP operations thanks to the 8° tilted propeller shaft or 3° tilted
nozzle
zz Electric L-drive up to 6 500 kW
zz High reliability
zz Wide power range
zz Compact and light design
zz Easy installation
Options
zz Condition monitoring (PCMS)
zz Oil condition monitoring
zz Redundant lubrication and steering hydraulic systems
146
UNDERWATER MOUNTABLE THRUSTERS
Wärtsilä Underwater Mountable Thrusters range
LMT UWM WST-U
147
PROPULSORS & GEARS
Wärtsilä Transverse Thrusters
Bevel-gear driven propeller in a transverse tunnel.
zz Controllable or fixed pitch propeller
zz Maximum thrust with small diameter
zz Robust reliable design
zz Easy installation
zz Standard and demountable versions available
zz Applications for dynamic positioning and manoeuvring purposes
Wärtsilä Transverse Thrusters dimensions

Electr. Freq. Rotation speeds Max. power (kW) (1) D L Mass (2)
Thruster
type Input Output Manoeuv- Dynamic
(Hz) (mm) (mm) (kg)
(rpm) (rpm) ring positioning
60 1775 524 621 471
CT/FT125 H 1250 1550 2800
50 1475 436 516 391
60 1780 437 883 609
CT/FT150 H 1500 1800 4200
50 1480 363 734 506
60 1785 385 1081 792
CT/FT175 H 1750 2000 5900
50 1485 320 899 659
60 1185 376 995 995
CT/FT175 M 1750 1926 5600
50 985 312 827 827
60 1185 376 1100 -
WTT-11 50 1485 379 1100 - 1750 1970 6090
50 985 377 1100 -
60 1185 266 1115 813
CT/FT200 H 2000 2250 8100
50 1485 333 1397 1019
60 1190 329 1516 1126
CT/FT200 M 2000 2181 7550
50 990 274 1262 937
60 1190 291 1787 1203
CT/FT225 H 2250 2350 11500
50 990 242 1487 1001
60 890 269 1642 1343
CT/FT225 M 2250 2285 10600
50 990 299 1827 1494
60 1190 269 2122 1528
CT/FT250 H 2500 2550 13800
50 990 224 1766 1271
60 890 236 1998 1457
CT/FT250 M 2500 2482 12700
50 990 263 2222 1621
60 890 218 2532 1781
CT/FT275 H 2750 2800 17800
50 990 242 2816 1982
60 890 241 2579 2007
CT/FT275 M 2750 2704 15600
50 740 200 2145 1669
60 890 218 3157 2202
CT/FT300 H 3000 3000 22700
50 740 182 2625 1831
60 710 211 3406 2463
CT/FT300 M 3000 2916 22500
50 740 220 3550 2567
60 600 205 - 3000
CT/FT300 Z 3000 2916 22500
50 600 205 - 3000
1) Maximum power level is valid for uni-directional rotation.
2) Includes a standard tunnel with e-motor support.
148
TRANSVERSE THRUSTERS
Wärtsilä Transverse Thrusters range
WTT-11 CP WTT-11 FP
CT FT
149
PROPULSORS & GEARS

Wärtsilä Midsize Waterjets
z A compactly designed axial pump with excellent efficiency,
cavitation and noise characteristics.
z The waterjet unit is completely pre-assembled, thereby reducing
installation time.
z High performance components in stainless steel to prevent wear
and corrosion.
z The water lubricated bearing in the stator bowl provides an
environmentally friendly solution.
z Water lubricated Face type sterntube seal with an optional inflatable
emergency seal.
z Inboard mounted thrust bearing block, for increased life and easy
maintenance.
z Inboard hydraulics provide an environmental friendly solution,
increased life and easy maintenance.
z Machinery controls integrated within the unit.
Key Benefits
A Plug and Play waterjet concept, with all auxiliary systems pre-
installed on the skid. The waterjet package is welded into the hull and
the yard connections are reduced to a minimum.
150
WATERJETS
Weight & dimensions table
Weight Weight Entrained

A B C D E F
Size steering booster water
(mm) (mm) (mm) (mm) (mm) (mm) (kg) (kg) (l)
510 1 540 1 060 2 300 3 000 1 100 510 1 450 1 050 450
570 1 730 1 200 2 600 3 400 1 200 570 1 800 1 300 600
640 1 930 1 350 2 800 3 800 1 400 640 2 450 1 800 850
720 2 170 1 500 3 100 4 200 1 400 720 3 000 2 250 1 250
810 2 440 1 700 3 600 4 800 1 400 810 4 000 3 000 1 750
Wärtsilä 450–810 sizes

4500 810 size
Available in modular, full stainless steel
4000
and in midsize “plug and play”
Available in modular, full stainless steel
3500 720 size
Engine power (BkW)
3000
640 size
2500
570 size
2000
510 size
1500 450 size
510 size
450 size
1000
500
15 20 25 30 35 40 45
Vessel speed (knots)
151
PROPULSORS & GEARS

Wärtsilä Modular Waterjets
zz The modular design allows flexibility in the scope of supply.
zz A compactly designed axial pump with excellent efficiency,
cavitation and noise characteristics.
zz High performance components in stainless steel to prevent wear
and corrosion.
zz The water lubricated bearing in the stator bowl provides an
environmentally friendly solution.
zz Water lubricated Face type sterntube seal with an optional inflatable
emergency seal.
zz Inboard mounted thrust bearing block, for increased life and easy
maintenance.
zz Tailor-made inlet design based on the shape and operational profile
of the vessel.
Key Benefits
Wärtsilä axial waterjets provide an average reduction of 25% in
transom occupation.
For naval architects this creates the possibility to apply a larger
power density onto narrower hulls for achieving so as to achieve top
vessel performance.
Jet sizes are indicated by the front side diameter of the impeller
seat ring. Unlike a non-axial design, the Wärtsilä axial design waterjet
does not expand in radial direction downstream.
152 Photo courtesy of Austal

WATERJETS
Weight & dimensions table
Inboard Transom Outboard Weight Outboard Weight

Size lenght(1) flange lenght (SR) (SR) lenght (B) (B)
(mm) (mm) (mm) (kg) (mm) (kg)
510 2 285 655 1 390 700 535 500
570 2 495 730 1 550 960 605 700
640 2 865 820 1 710 1 400 680 1 100
720 3 155 920 1 960 1 900 765 1 350
810 3 550 1 035 2 195 2 700 855 1 900
910 4 020 1 165 2 475 3 700 965 2 450
1 000 4 350 1 280 2 710 4 600 1 055 3 350
1 100 4 735 1 405 3 000 6 200 1 165 4 200
1 200 5 095 1 535 3 250 7 900 1 270 5 700
1 300 5 625 1 665 3 520 10 100 1 375 6 900
1 400 6 005 1 790 3 790 12 000 1 480 8 100
1 500 6 370 1 920 4 050 14 500 1 585 10 000
1 620 6 965 2 075 4 350 17 900 1 7100 12 500
1 720 7 340 2 200 4 655 21 200 1 815 15 100
1 880 7 910 2 405 5 070 27 800 1 985 18 900
2 020 8 530 2 585 5 465 32 800 2 135 23 200
2 180 9 120 2 790 5 880 40 500 2 300 27 700
2 350 9 710 3 005 6 325 49 500 2 480 33 800
(1) Inboard lenght may vary depending on the optimized shape of the inlet duct.
Outboard length Inboard length
153
PROPULSORS & GEARS
14 000
1400 size
13 000
12 000
1300 size
11 000
Engine power (BkW)
10 000 1200 size

9000
1100 size
8000
7000 1000 size
6000 910 size
5000
910 size
4000
3000
2000
15 20 25 30 35 40 45

32 000 2180 size
30 000
28 000 2020 size
26 000
Engine power (BkW)
24 000 2020 size 1880 size

22 000
1720 size
20 000
18 000 1620 size
16 000 1500 size
14 000
12 000
10 000
8000
6000
15 20 25 30 35 40 45
154
WATERJETS
Waterjet size selection
The selection graphs indicate the jet size required based on the relation
between the engine power and the design speed of the vessel. For
instance a ship with four 1 250 kW engines and a corresponding vessel
speed of 33 knots will need four 510 size waterjets. A ship with a design
speed of 40 knots at 1 250 kW power can use 450 size waterjets. The
correct jet size is thus indicated by the line above the intersection of
the power and the corresponding vessel speed.
We are available from the earliest design stages of the vessel to
work with you on an optimised propulsion system. Please contact us
for an optimised jet selection based on specific vessel design
parameters, operating profile or for details of waterjets above 50 knots
or 30 000 kW. DXF/DWG format general arrangement drawings of the
most often used sizes are available.
Application
The characteristics of a waterjet make it a good propulsor for several
types of applications.
zz High speed vessels; waterjets have better propulsion efficiency at
ship speeds over 25–30 knots.
zz Shallow draft vessels; the integrated steering function provides
benefits for rescue vessels, inshore passenger ferries, landing
crafts & special work boats.
zz High power density; the pressure built-up in the waterjet inlet
allows small dimensions.
zz Maneuverability; waterjets have integrated steering and reversing
with quick response times.
155
PUMPS & VALVES
Wärtsilä Wärtsilä
deepwell cargo deepwell cargo
handing handing
DL pump CKL pump

Wärtsilä Svanehøj Deepwell
Cargo Handling Systems
For safely offloading a wide range of liquid cargoes, we offer the most
flexible and environmentally sound solutions.
Our high quality deepwell cargo pump systems are powered by
quiet, efficient electric drives that are fast and easy to install.
We specialise in competitively priced full cargo and ballast systems
including drive systems, switchboards and accessories.
Around the world, we create custom-made turnkey solutions for any
tanker, with full project management from start to safe on-time delivery
and installation.
156

Wärtsilä Svanehøj Deepwell Gas Pumps
When absolute confidence in offloading safety and efficiency
are critical, Wärtsilä Svanehøj is the natural choice among gas
carriers worldwide for deepwell and cargo booster pumps.
Our dedicated project teams deliver solutions for vessels from
the smallest fully pressurized push barges and dedicated CO2
carriers to the largest fully refrigerated VLGCs.
Our pumps handle ALL TYPES of cargo at all temperatures
and gravities without any component changes, offering
potentially huge cost savings. Our range spans:
zz Fully pressurised tankers, cargo at ambient temperature,
tank pressure up to 18 bar.
zz Fully refrigerated atmospheric tankers, cargo cooled to
saturation temperature (typically -48°C).
zz Semi-refrigerated tankers, cargo liquefied by cooling/
pressure process down to -104°C.
zz We lead in long-shafted pumps
for LNG at -163°C.
Wärtsilä Svanehøj
deepwell gas pump
Wärtsilä Deepwell Offshore

Process and Cargo Pumps
Based on Wärtsilä’s world-renowned deepwell pump
technology, our Offshore Process and Cargo (OPC) pumps
have been specially developed to meet the extreme demands
and specifications of the offshore industry.
Our high efficiency electrically driven explosion-proof
pump systems deliver the highest
standards of energy efficiency, safety
and reliability the offshore industry
demands such as API 610 and
ATEX certification.
Wärtsilä deepwell
offshore process
and cargo pump
157
PUMPS & VALVES
Our promise – minimised new build and project risks and economical
lifetime operation through innovative designs tailored to your individual
needs, compliant with the most rigorous offshore standards.
Testing and inspection
Wärtsilä is well established in the offshore sector and can perform a
number of tests and inspections prior to delivery, such as;
zz Material inspections: Visual inspections, Liquid penetrant testing,
Radiographic testing, material certificates and welding log.
zz Performance tests: Hydrostatic pressure tests, Q/H performance
test, NPSH test, 4 hours mechanical run test and Complete Unit
test. The final product can be delivered with detailed documentation
specifying welding procedures, preservation procedures, surface
coating, weight procedure and traceability record. Furthermore the
final documentation may include noise, vibrations and temperature
data sheets for the various tests performed.
Wärtsilä Svanehøj
Deepwell Ballast Pumps
Wärtsilä is the leading manufacturer of
high quality deepwell in-line centrifugal
ballast pumps for demanding offshore
applications.
Our pumps offer outstanding
reliability, low noise and efficiency for
floating production units of all sizes.
The environmentally sound pump
is designed for direct on-line starting,
or alternatively with variable speed
regulation available through a frequency
converter.
Wärtsilä Svanehøj deepwell

ballast pump
158

Wärtsilä Seawater Lift Pumps
Wärtsilä’s range of robust,
efficient sea water lift pumps
are designed specifically
for the demanding offshore
market. Our range sea
water lift pumps are based
on well-known technology,
offer safe operation and low
maintenance cost.
Vertical line shaft pumps
(API 610 VSI)
Capacity range:
50–2 800 m3/h
Vertically suspended,
single casing diffuser
line-shaft driven pumps
with discharge through
the column. VS1 design
according to API 610 11th
edition.
In-line seawater lift
pumps
Capacity range:
400–5 000 m3/h.
Differential pressure:
08–10 bar Wärtsilä in-line seawater lift pump
Low NPSHr to meet stringent offshore specifications, configurations

of inlet and outlet nozzles to suit every piping installation. Either
directly coupled to an electric motor within a safe area or through a
cardan shaft installed in the pump room. We supply a range of high
quality casing and impeller materials including nickel, aluminium,
bronze or super duplex.
159
PUMPS & VALVES
Wärtsilä Pump Room Systems
When offloading cargo, efficiency is everything. With half a century of
pump room expertise, Wärtsilä has the know-how to optimise any kind
of pump room system, end-to end.
A dedicated pump room puts all your pump equipment in one place,
easily accessible. Whether you need steam, direct diesel or quiet electric
drive, horizontal or vertical installations, automatic or manual monitoring,
we’ll work in collaboration with you to consider every option and design
the optimum solution for your vessel and your needs.
Using superior materials, robust testing and our renowned pump
technology, we can make any system as reliable, efficient and cost-
effective as possible.
We can advise on and supply any prime mover arrangement that
will optimise your efficiency, including high efficiency, low noise, low
emissions electric systems and variable speed control to maximise
flow rates and use less power.
Versatile driver option
ELECTRIC DRIVE Wärtsilä
pump room
zz Vertical or horizontal
system
zz Single speed or two speed
zz VFD/VSD solutions
STEAM TURBINES
zz Vertical or horizontal
zz Single stage or multi stage
DIESEL ENGINE DRIVE

zz Horizontal with clutch direct drive
zz Vertical with angle gear solutions
zz Combined solutions for Pump
Drive and Gensets
Performance stripping systems
Through our pioneering expertise with Eureka systems, we invented in
stripping systems are remain specialists in maximising cargo offloading
efficiency, speed and reducing risk. Priming and capacity regulating
systems convert any centrifugal pump into a self-primed unit for optimal
discharge and stripping performance. Systems consist of air/gas
separators with built-in strainers, auto stop/start vacuum pump units,
capacity regulating valves and the latest within PLC based all electric
control units for minimum cargo wastage and maximum profits.
160
Control systems
Control Systems put full Pump Room control in one convenient place.
PLC based all electric control system for control and monitoring of all
functions required for the scope within our system. We also provide
Remote Valve Control System solutions where all Cargo and Ballast
Valves with actuators are included in addition to the required Hydraulic
Power pack and Solenoid Rack. Our Control System can integrate
optional functions like Load Calculator, Level Gauging System and
Vapor Emission Recovery Systems.
Wärtsilä Hamworthy Engine Room Pumps

Engine room pumps are critical for your operations. The costs of pump
failures, such as loss of engine cooling water, are high. That’s why
Wärtsilä pumps are built for ultimate reliability in the toughest operating
conditions. From the very compact, single suction, overhung bearing,
radially split C2G pump in capacities to 1 600 m3/h, to the versatile,
double suction, between bearing, axially split CA & CB pumps in
capacities to 6 000 m3/h, we have pump and priming solutions to meet
your requirement and piping needs. Our widely proven applications
include general service fresh water and sea water pumps, fire pumps,
ballast pumps and cooling pumps;
zz Nickel Aluminum Bronze as standard, superior for sea water
applications to lesser bronzes (used by many competitors).
zz Duplex and super-duplex stainless steel pumps in offshore and
exhaust gas cleaning applications available across our pump range
We have a
global offshore
reputation. Our
pumps are used
by production and
drilling operators
on FPSOs, semi-
submersible rigs
and drillships and
we understand
the demanding
requirements and
documentation this
sector requires.
Wärtsilä Hamworthy engine room pump (model C2G)
161
PUMPS & VALVES
Wärtsilä Hamworthy
firewater pump package

Wärtsilä Hamworthy Firewater Pump Packages
Fire Water Pump Packages are safety critical for offshore operators.
Wärtsilä designs system solutions to the highest NFPA 20 standards,
with the reassurance of high quality Wärtsilä pump technology at the
heart of the system.
Our range of in-line centrifugal pumps or deepwell submerged
pumps is available with a wide choice of drives and configurations,
either contained or open for fire compartments.
We work with you throughout, from pre-FEED to Detail Design
stages, to create your optimum custom solution for complete peace
of mind.
NFPA 20 controller
The NFPA 20 controller ensures that the pump operates according to
the regulations given in NFPA 20.The FWPP system is supplied self-
contained, and is in accordance with strict operational requirements
such as when in fire mode, the controller will only start the fire pump
when:
The fire main pressure drops below the set value of the pressure
switch
zz Receiving a fire & gas signal
zz Receiving a manual start signal, either locally or remote
zz A wiring failure occurs (fail-safe design)
162
Likewise in fire mode, the controller will only stop the engine when:
zz Engine overspeeds
zz Local stop button is pushed

External Fire Fighting (Fi-Fi) Systems
The complete, fully integrated solution from one source – that’s the
promise from Wärtsilä.
Systems engineering means our firefighting (Fi-Fi) systems are
custom-designed for every customer and easy to install on any type of
vessel large or small. They meet every major compliance and quality
approval, with options such as foam mixing and oil dispersant systems
to help you deal with any marine emergency.
With full quality control over raw materials from our foundry, we
guarantee systems you can trust completely.
Wärtsilä Hamworthy CBF pump
163
PUMPS & VALVES
VALVES
In the valves industry, no other company has a richer heritage
than Wärtsilä. Wärtsilä Valves Limited are a European based valve
manufacturing group with over 80 years’ experience supplying a wide
range of manual and actuated valves in non-ferrous, high alloy, steel
and composite materials for the global energy industries:
z Offshore Oil and Gas z LNG
z Floating Production Systems z Naval Marine
z Petro-Chemical z Marine Services
z Power Generation z Pipelines
We are recognised around the world for our engineering excellence,

superb customer service and high-performing products, and are the
chosen valve supply partners of a growing and enviable list of global
blue chip clients.
Shipham Valves
THE WORLD’S PREFERRED VALVE SOLUTIONS PARTNER
Shipham Valves manufactures non-ferrous, high alloy and composite
valve solutions for handling sea water and other corrosive media.
For 80 years a key supplier to the British Royal Navy and Ministry of
Defence, Shipham is now widely recognised as a global leader in the
design and manufacture of valves used in severe service applications,
handling sea water and other corrosive media.
164
Shipham Valves offers a diverse range of valves by type, material, and
size, providing gate, globe, check (swing and wafer style), ball, Y-type
strainers and butterfly valves, in sizes from 1/4” to 48” in non-ferrous,
composite and high alloy materials.
Speciality materials – ‘our standard’
Nickel Aluminium Bronze, Bronze,
Duplex / Super Duplex Stainless Steel,
Hastelloy®, Titanium, Monel®, Zirconium, a Wärtsilä product
Inconel® & Glass Reinforced Epoxy (GRE).
John Mills Valves

BESPOKE VALVE SOLUTIONS FOR OFFSHORE,
MARINE & INDUSTRIAL APPLICATIONS
Focused on short lead-times, John Mills Valves manufactures bronze
and nickel aluminium bronze gate, globe, check, strainers and storm
valves for sea water service in the marine, oil & gas, Naval, water
treatment and chemical industries.
In addition to our standard valve range we also manufacture
specialty valves such as mud boxes, gland cocks, sight glasses,
sounding cocks and storm valves.
Our complete in-house capabilities include design, pattern
manufacture, casting production, machining and assembly & test
which allows John Mills to produce both
standard and bespoke designed valves
within industry leading timescales. a Wärtsilä product
Cort Valves
PIPELINE BALL & GATE VALVES
Cort Valves has over 70 years’ experience in the design and manufacture
of API-6D trunnion mounted ball valves & through conduit gate valves
for the global oil and gas industry. Manufactured to order with reduced
lead-times, the CORT range of pipeline valves are available in sizes
2”–60” diameter and in pressure classes from ANSI 150–2 500.
With an enviable product population
installed worldwide by major oil and gas end
users, Cort continue to support our clients
assets from our extensive records with
servicing, repairs and spares availability. a Wärtsilä product
165
SEALS, BEARINGS & STERNTUBES
WÄRTSILÄ SEALS,
BEARINGS, STERNTUBES & OTHERS
Our Seals & Bearings product portfolio is the most comprehensive in
the market, and we continuously develop innovative, environmentally
compliant and longer lasting new products. At the same time, our
global service network can provide the fastest response in the
business, providing expertise anywhere in the world at very short
notice when necessary.
Ship owners and operators are looking for solutions to reduce their
maintenance costs in the highly contested shipping market. On one
hand this means a growing price consciousness regarding spare parts.
But on the other hand it also means that ship owners and operators are
increasingly looking beyond the initial outlay and searching for longer
lasting performance and lifecycle cost efficiency.
Lifecycle efficiency
As the seals & bearings solution provider with the widest range of
products, both oil and water lubricated, Wärtsilä is uniquely positioned
to help ship owners find solutions for improving lifecycle efficiency.
Our complete product portfolio, technology know-how, constant
innovation and a global service network means that we can always
find the ideal solution for the customer instead of being forced to push
a single technology for every need.
Risk reduction
The positive, agile and flexible attitude adopted in Wärtsilä Seals&
Bearings, is our way to ensure we can say yes to customers’ requests
and offer the fastest service in the industry. The ability to be positive
comes from an agile and flexible way of organising our operations. With
our shipyard customers this means having our technological know-how
in the frontline so that they can get quick answers to their questions,
requests for quotations etc. For ship owners and operators it is a matter
of knowing that, when needed, they can count on our global field service
network’s fast response to get uptime on their vessels.
Environmental leadership
Developments in environmental legislation are leading to a growing
demand for environmental upgrades for existing vessels. Wärtsilä is
able to answer these needs and assume full responsibility for service
and maintenance over the entire vessel lifecycle. With the needed
service capability and resources in place globally and armed with a
deep understanding of different ship systems, we are ready to take
on even large conversion projects involving extensive dismantling of
the vessel.
166
Wärtsilä Sealing Solutions
Wärtsilä stern tube seals – oil lubricated
STANDARD
Inland Waterways & Coastal
Wärtsilä Sternguard: Fwd Face Seal, OFS1R-N-Z, (50–320 mm)
Wärtsilä Sternguard: Fwd Compact Lip Seal, OLS2-P-C, (136–362 mm)
Conventional Commercial
Fwd
Wärtsilä Sternguard: Fwd Lip Seal, OLS2-P, (80–1172 mm)

Special & Offshore
Wärtsilä Sternguard: Fwd Face Seal, OFS1HW-F Seaqual, (205–1004 mm)
Wärtsilä Sternguard: Fwd Face Seal, OFS1HW-P Seaqual, (205–1004 mm)
Wärtsilä Sternguard: Fwd Face Seal, OFS1HW-N Seaqual, (66–1029 mm)
Wärtsilä Sternguard: Aft Face Seal, OFS1R-N, (50–320 mm)
Wärtsilä Sternguard: Aft Compact Lip Seal, OLS3-P-C, (136–362 mm)
Conventional Commercial
Wärtsilä Sternguard: Aft Lip Seal, OLS3-P, (80–1172 mm)
Aft

(extra redundancy-stand-by)
Special & Offshore
Wärtsilä Sternguard: Aft Face Seal, OFS1H-F Seaqual, (205–1004 mm)
Wärtsilä Sternguard: Aft Face Seal, OFS1H-N Seaqual, (205–1004 mm)
Wärtsilä Sternguard: Aft Face Seal, OFS1H-P Seaqual, (205–1004 mm)
ANTI-POLLUTION
Merchant
Wärtsilä Airguard: Aft Lip Seal, OLS3A-P, (286–1172 mm)
Aft
Wärtsilä Airguard: Aft Lip Seal, OLS4A-P, (286–1172 mm)

(extra redundancy)
ABRASION RESISTANT
Wärtsilä Sternguard: Aft Face Seal, OFS1R-N-X, (50–320 mm)
Wärtsilä
Dredgers Sternguard
Aft
Wärtsilä Sandguard: Aft Lip Seal, OLS3W-P, (286–1172 mm)

Wärtsilä Sandguard: Aft Lip Seal, OLS4W-P, (286–1172 mm)
(extra redundancy)
167
Wärtsilä
Enviroguard
Wärtsilä stern tube seals – water lubricated

OPEN WATER LUBRICATION (70–1040 mm)
Commercial & Military
Wärtsilä Enviroguard: Standard, Fwd Face Seal, WFS1R-F, (70–450 mm)
Wärtsilä Enviroguard: Standard, Fwd Face Seal, WFS1R-P, (70–450 mm)
Wärtsilä Enviroguard: Shock, Fwd Face Seal, WFS10-P-M, (150–1040 mm)
(shock compatible)
Wärtsilä Enviroguard: Shock, Fwd Face Seal, WFS10-F-M, (150–1040 mm)
Fwd
(shock compatible)
Wärtsilä Enviroguard: Shock, Fwd Face Seal, WFS10-F-EM, (250–900 mm)
(shock compatible Fwd face seal with packing)
Commercial Only
Wärtsilä Enviroguard: Composite, Fwd Face Seal, WFS1R-P-L, (110–410 mm)
Wärtsilä Enviroguard: Composite, Fwd Face Seal, WFS1H-P-L, (460–820 mm)
CLOSED WATER LUBRICATION (320–1140 mm)

Ice Class
Wärtsilä Iceguard: Fwd Face Seal, WFS1O-P-MX, (320–1140 mm)
Wärtsilä Iceguard: Aft Face Seal, WFS1O-P-MY, (320–1140 mm)
Wärtsilä
Floodguard
Wärtsilä bulkhead seals

STANDARD
Wärtsilä Floodguard: Standard Bulkhead Face seal, WFB1-F-M, (50–680 mm)
HIGH SPEED
Wärtsilä Floodguard: High-Speed Bulkhead Face seal, WFB1-F-MS, (50–680 mm)
168
Wärtsilä
Diveguard
Wärtsilä submarine seals

SUBMARINE
Wärtsilä Diveguard: Single Barrier Fwd Face seal, WFS1H-P-M, (200–700 mm)
Wärtsilä Diveguard: Tandem Barrier Fwd Face seal, WFS2H-P-M, (200–700 mm)
Wärtsilä
Jetguard
Wärtsilä waterjet seals

WATERJETS
Commercial
Wärtsilä Jetguard: Standard, Waterjet Face Seal, WFS1R-P-J, (110–410 mm)
Wärtsilä Jetguard: Composite, Waterjet Face Seal, WFS1R-P-LJ, (110–410 mm)
Military
Wärtsilä Jetguard: Standard, Shock, Waterjet Face Seal, WFS1R-P-M, (120–380 mm)
(shock compatible)
Wärtsilä Jetguard: Waterjet Face Seal, WFS1R-F-M, (120–380 mm) (shock compatible)
WATERJET HUBS
Wärtsilä Hubguard: Compact, Face Seal, OFS1H-N-CJ, (50–300 mm)
(oil lubricated waterjet hubs)
Wärtsilä Hubguard: Standard, Face Seal, OFS1H-NJ, (70–510 mm)
(oil lubricated waterjet hubs)
Wärtsilä
Oceanguard
Wärtsilä special applications seals

Wärtsilä has extensive experience with customers having both
specialised and original requirements. This has allowed us to develop
our expertise in the creation and validation of bespoke sealing solutions.
The fields of application are widespread, and include industrial,
renewable power generation, and heavy lift vessel applications.
Tidal Turbines
Wärtsilä Oceanguard: Aft Face Seal, OFS3H-N, (125–1000 mm)
169
Wärtsilä Wärtsilä
Sternguard Steerguard
Wärtsilä thruster / pod seals

THRUSTERS
Standard
Wärtsilä Sternguard: Aft, Compact, Lip Seal, OLS3-P-C, (136–362 mm)
Wärtsilä Sternguard: Aft, Lip Seal, OLS3-P, (80–1172 mm)
Wärtsilä Sternguard: Aft, Face Seal, OFS1H-N-C, (205–1004 mm)
Anti-Pollution
Aft
Wärtsilä Airguard: Aft, Lip Seal, OLS3A-P, (286–1172 mm)

Wärtsilä Oceanguard: Aft, Face Seal, OFS3H-P, (125–1060 mm)
Pressure compensation
Wärtsilä Oceanguard: Aft, Face Seal, OFS3H-N-D, (125–700 mm)
Wärtsilä Oceanguard: Aft, Face Seal, OFS3H-P-D, (125–700 mm)
ELECTRIC PODS
Standard
Wärtsilä Sternguard: Aft, Lip Seal, OLS4-P, (286–1172 mm)
(extra redundancy-stand-by)
Aft
Abrasion Resistant & Anti-Pollution

Wärtsilä Oceanguard: Aft, Face Seal, OFS3H-P, (400–760 mm)
Wärtsilä rudder / stabiliser seals

RUDDER STOCKS (155–710 mm)
Oil Lubricated
Wärtsilä Steerguard: Standard Lip Seal, KLR2-P, (155–710 mm)
Wärtsilä Steerguard: Standard Lip Seal, KLR3-P, (155–710 mm) (extra redundancy)
RUDDER STOCKS & STABILISERS (50–1300 mm)

Grease or Water Lubricated
Wärtsilä Steerguard: Small Range, Standard, Face Seal, JFZ1R-N, (50–320 mm)
Wärtsilä Steerguard: Mid Range, Standard, Face Seal, GFR1R-P, (320–530 mm)
Wärtsilä Steerguard: Large Range, Shock, Face Seal, GFR1R-P-M, (530–1300 mm)
170
Wärtsilä Wärtsilä Wärtsilä
Envirosafe Sternsafe Steersafe
Wärtsilä Bearing Solutions

Wärtsilä stern tube bearings (oil & water)
OIL LUBRICATED
Commercial
Wärtsilä Sternsafe: Standard White Metal, OMS-N, (136–1172 mm)
(un-split oil lubricated white metal bearing)
Wärtsilä Sternsafe: Composite, OCS-N, (70–1100 mm)
(un-split oil lubricated composite bearing, mainly retrofits)
Wärtsilä Sternsafe: Composite, OCS-N-X, (200–1100 mm)
(un-split oil lubricated composite bearing)
WATER LUBRICATED
Wärtsilä Envirosafe: Composite, WCS-N-M, (70–1100 mm)
(un-split water lubricated composite bearing)
Wärtsilä Envirosafe: Composite, WCS-P-M, (200–1100 mm)
(split water lubricated composite bearing)
Wärtsilä Envirosafe: Composite, WCS-F-M, (300–1100 mm)
(split water lubricated composite bearing) O housing
Wärtsilä rudder / stabiliser bearings

STANDARD
Commercial & Military Rudder
Wärtsilä Steersafe: un-split oil lubricated composite bearing, JCR-N, (70–1200 mm)
DRY RUNNING CAPABILITY

Commercial & Military Rudder
Wärtsilä Steersafe: un-split oil lubricated composite bearing, DCR-N, (70–705 mm)
171
Wärtsilä intermediate shaft bearings

STANDARD
Commercial (up to 0.8 Mpa) Wärtsilä Standard intermediate Shaft Bearing
Self-aligning and forced lubrication, OPSY-F, (126–825 mm)
Self-aligning and self-lubrication, OPSQ-F, (126–825 mm)
HIGH LOAD
Commercial (0.8–1.5 Mpa) Wärtsilä High Load Intermediate Shaft Bearing
High load and forced lubrication, OPSQ-F-X, (271–800 mm)
Wärtsilä thrust bearings

Commercial & Military Wärtsilä Thrust Bearing
Forced lubrication (axial) with optional external lubrication, OBSY-F, (110–560 mm)
Self-lubrication (axial and radial loads) with optional external lubrication, OBSQ-F,
(110–560 mm)
Wärtsilä generator bearings

Commercial & Military Wärtsilä Generator Bearing
Side flanged type, OGSS-F, (80–500 mm)
Central flanged type, OGSC-F, (80–500 mm)
Pedestal type, OGSP-F, (250–800 mm)
172
Wärtsilä Stern Tube Solutions
Our packages are all designed to meet certain standards and can be
customised to suit specific applications. Options include oil lubricated
sterntubes with white metal or composite bearings or water lubricated
sterntubes with composite bearings.
Wärtsilä Other Seals & Bearings Products

Wärtsilä water quality systems
Pumped water flush supply systems with various filtration and
temperature control options to improve and increase life of the seal and
bearing products installed. Systems are adapted to suit applications
either by filtering to required standards in silty/ gritty water environments
or controlling closed water temperature in ice-class type applications.
Suitable for both open and closed water lubricated sterntubes.
WATER QUALITY SYSTEMS

Flush Supply & Filtration
Wärtsilä Water Quality System: open water (clear), WYS-M
Wärtsilä Water Quality System: open water (high performance- silty), WYS-MX
Flush Supply, Filtration & Temperature Control
Wärtsilä Water Quality System: closed water system, WQS-M
173
Wärtsilä hydraulic equipment

Hydraulic couplings, nuts and bolts designed for easy handling
and trouble free operation made from the highest quality steel in
accordance with existing classification rules.
HYDRAULIC EQUIPMENT
Hydraulic Couplings
Wärtsilä Hydraulic Coupling: with flange, OHSM, (100–800 mm)
Wärtsilä Hydraulic Coupling: with flange and longer body, OHSM-B, (100–800 mm)
Wärtsilä Hydraulic Coupling: with flange in sleeve, OHSM-V, (100–800 mm)
Wärtsilä Hydraulic Coupling: without flange, OHSN, (100–800 mm)
(no reamer bolts required)
Hydraulic Nuts
Wärtsilä Hydraulic Nut: propeller nut, ON
Hydraulic Bolts
Wärtsilä Hydraulic Bolt: for shaft coupling flanges, OS
Wärtsilä nozzle Wärtsilä tunnel
Wärtsilä rudders
Wärtsilä steel fabrication

Tunnels, rudders & nozzles manufactured to customers’ specifications.
174
All of our products can be described using an acronym:
Example of WFS1O-P-M***
Lubrication: W = Water
Product type: F = Face seal
Position: S = Shaft
No. of sealing interfaces: 1
Seal spring type or basic F: O = Omega springs
Serviceability: P = Serviceable with shaft in-situ
Additional features: M = Shock compatible
WÄRTSILÄ SEALS AND BEARINGS DESCRIPTIVE PRODUCT NAMES (WFS1O-P-M***)
Lubrication (internal operating) Product type

D = Dry, grease, oil or water C = Composite bearing
G = Grease or water F = Face seal
W J = Grease, oil or water L = Lip seal
K = Grease or oil M = White metal bearing
O = Oil P = Line shaft/plummer bearing
Y = Flush supply & filtration system
W = Water Q = Flush supply, filtration &
F temperature control
T = Stern tube
Position (if applicable) H = Hydraulic coupling
B = Bulkhead N = Hydraulic nut
S R = Rudder S = Hydraulic bolt
S = Shaft B = Thrust bearing
Z = Stabilizer or rudder G = Generator bearing
No. of sealing interfaces

1 (seals only) or Composite bearing
material designation
O Sealing interfaces:
1, 2, 3 or 4 (as applicable)
- Serviceability (if applicable) Bearing material:
F = Replaceable and serviceable 01, 02, 03 etc. (as applicable)
with shaft in-situ
P N = Non serviceable in-situ
P = Serviceable with shaft in-situ Seal spring type or basic function
(seals, line/shaft/thrust/
- Additional features (if applicable) generator bearings only)
C = Compact A = Air flush
D = Damper/lip system H = Helical spring
E = Emergency packing O = Omega spring
M L = Lightweight composite Q = Self oil lubrication
M = Shock compatible R = Rubber bellows/body
* S = High speed W = Water flush
Y = Forced oil lubrication
X = High performance AW= Air and water flush
* Y = Outboard water M = Flange mounted
Z = Inboard oil N = No flange
* B = Longer body
V = Flange in sleeve
C = Central flange
S = Side flanged
J = Jet version P = Pedestal
175
SHIP DESIGN
SHIP DESIGN PORTFOLIO & SERVICES

With the benefit of 50 years of experience, Wärtsilä Ship Design is
able to offer a complete range of options; from fully tailor-made unique
designs, to standard, well proven, off-the-shelf designs.
A ship is built to last several decades, and decisions made in the
early design stages will have consequences that effect the operation
of the vessel throughout its entire lifetime. Wärtsilä takes operational
considerations, as well as construction friendliness, into account
during the design phase. Wärtsilä’s vision is to be its customers’ most
valued business partner. We will support our customers in optimising
their assets with the best designs, high quality products and system
solutions, global services, as well as by providing maintenance and
operational assistance.
Wärtsilä primarily provides designs for merchant, offshore and
special vessels. Offshore construction vessels, anchor handling
vessels, platform supply vessels, cable layers, pipe layers, container
vessels, chemical tankers, research vessels, and offshore wind farm
installation vessels are amongst our references.
176
SHIP DESIGN
We cover the full range of ship design disciplines, including naval

architecture, hull optimisation, stability calculations, hull and structural
engineering, accommodation and outfitting, machinery and piping
engineering, as well as automation and electrical engineering.
Wärtsilä offers basic designs, including classification drawings,
detail design, and optimised 3D production drawings for shipyards
worldwide.
Wärtsilä also offers a comprehensive range of marine consultancy
services for shipyards or ship owners undertaking newbuilding,
conversion, and retrofit projects.
Wärtsilä provides technical, operational and commercial feasibility
studies, conceptual and initial designs, the preparation of general
arrangements, and all the necessary related documents.
Wärtsilä assists its customers with tenders by preparing tendering
documents and presentation material, and by participating in the
evaluation processes.
177
WSD 42 111K – Aframax tanker DF
Length overall .................................252.80 m Cargo capacity ........................... 128 500 m3
Breadth .............................................44.00 m Deadweight ...................................111 000 T
Draught, max ....................................15.00 m Service speed ............................... 14.5 knots
WSD 72 2700 – Roll on-Roll off Cargo carrier

Length overall .................................182.20 m Service speed: ................................. 20 knots
Breadth .............................................28.40 m Deadweight at scantling ..................13,400 T
Draft, max ...........................................7.40 m Lane .................................................. 2700 lm
WSD 84 2400 – Container RoRo Vessel

Length over all ..................................219.5 m Service speed: ................................. 21 knots
Breadth ............................................ 32.24 m Deadweight at scantling:
Depth ..................................................18.0 m in excess of 26,000 t
Draught, max ....................................10.36 m
178
SHIP DESIGN
VS 485 PSV MKIII – Platform Supply Vessel

Length overall....................................85.60 m Deck area......................................... 1000 m2
Breadth..............................................20.00 m Power.........................................4 x 1665 kW
Depth...................................................8.60 m Speed............................................ 15.4 knots
Option for ICE 1B
VS 4411 DF PSV – Platform Supply Vessel (LNG)

Length overall....................................89.20 m Cargo area.......................................... 855 m2
Breadth moulded...............................19.00 m Power............. 2 x 1351 kWe + 2 x 2510 kWe
Depth to 1st deck................................9.00 m Accommodation......................................... 28
Option for ICE 1B
WSD 1000 PSV – Platform Supply Vessel

Length overall....................................88.80 m Depth...................................................8.40 m
LBP....................................................77.20 m Draft scantling.....................................6.95 m
Breadth..............................................20.00 m Draught design....................................5.50 m
179
VS 4616 PLV – Pipe Layer Vessel
Length overall..................................146.00 m Crane.....................................................250 T
Breadth..............................................30.00 m Tensioners w 4 tracks x 2 (total)............550 T
Depth.................................................12.70 m Carousel..............................................2500 T
VS 4725 DSV – Dive Support Vessel

Length.............................................123.00 m Cargo area..................................... 980.00 m2
Breadth..............................................24.00 m Saturation diving up to 300 m......... 18 divers
Depth to 1st deck..............................10.50 m Accommodation.............................. 110 POB
VS 4285 HCV – Heavy Construction Vessel

Length overall....................................94.80 m Bollard pull............................................250 T
Breadth...................................................23 m Machinery configuration............... Hybrid/D-E
Depth to 1st deck..................................9.6 m Main engines............. 16-cylinder Wärtsilä 32
180
SHIP DESIGN
VS 4625 AHTS – Ahchor Handling Vessel

Length overall ...................................94.80 m Bollard pull............................................250 T
Breadth ..................................................23 m Machinery configuration .............. Hybrid/D-E
Depth to 1st deck .................................9.6 m Main engines ............ 16-cylinder Wärtsilä 32
VS 4004 MAS – Multipurpose Accommodation Ship

Length overall .................................112.80 m Draft designed ......................................5.5 m
Breadth .............................................30.00 m Generators .................................4 x 3000 kW
Depth .................................................9.00 m Accommodation ...................................... 400
WSD 5054 MKII DF

Length overall .................................144.40 m Cargo capacity ............................. 19 500 m3
Breadth .............................................23.00 m Deadweight, max.............................16 700 T
Draught, max ......................................9.20 m Service speed ............................... 13.5 knots
181
WASTE, OIL & FRESH WATER MANAGEMENT
Wärtsilä Serck Como
Multi Stage Flash Evaporators
The Wärtsilä Serck Como multi-stage flash (MSF) evaporator is utilised
for producing fresh water from seawater, well water or industrial water.
A special advantage of the multi-stage flash technology is that the
specific heat consumption (or thermal efficiency) can be continuously
adapted to the individual requirements of each application.
The produced distillate has a very low salt content which makes it
suitable as technical water (e.g. boiler feed water). The distillate quality
and quantity are independent from the seawater temperature which
makes the MSF technology a reliable source for freshwater.
Characteristics
zz Capacity up to 1500 t/d.
zz Salt content of the distillate ≤ 4 ppm NaCI.
zz Steady production of freshwater at seawater temperatures between
0–32°C
zz Either steam, engine jacket water or a combination of these can be
utilised for heating
zz Corrosion resistant materials (e.g. copper- nickel) for components
in contact with seawater
Key benefits
zz Flexible dimensions
zz Full-automatic operation
zz High availability due to low maintenance requirements
zz Technology with the lowest lifecycle costs
zz Efficiency gained by the use of frequency converter for pumps
zz Minimised risk of scaling because
heat transfer and evaporation
are taking place in
different areas
182

Wärtsilä Serck Como
Single Stage Desalination Systems
The Wärtsilä Serck Como Single Stage Desalination (SSD) fresh water
generator uses the process of vacuum distillation to remove the salt
and other impurities from seawater and convert it into high quality,
drinkable fresh water. Thanks to the low seawater flow the Wärtsilä
Serck Como SSD consumes a reduced amount of electricity.
The system uses a vacuum distillation process that enables the use
of low temperature heat. The generator utilises the waste heat from
the main diesel engine or other alternative heat sources to evaporate
the seawater.
The technology is simple and has a modular design. The automated
operation and low maintenance requirements enable continuous and
user friendly handling.
Wärtsilä has developed an energy efficient and cost-effective
technology for seawater desalination, with a capacity up to 35 t/d, for
marine and offshore applications.
Key benefits
zz Low electrical consumption
zz High distillate qualityEasy operation
183
Wärtsilä Oily Water Separators

The Wärtsilä Oily Water Separator (OWS) easily handles bilge water
with minimum impact for operation staff and with results that easily
surpasses current and future legislative requirements.
The technology behind the Wärtsilä OWS is a combination of
optimized traditional methods and innovative new solutions. The
separator consists of a four-stage, emulsion-breaking unit, where each
stage handles one key component of the sludge and bilge mix. It can
handle input flows with an oil content of between 0 and 100%, making
it the most versatile separator on the market.
The Wärtsilä OWS units are IMO and US Coast Guard approved
and gives the operator effective control over all bilge media as well as
over any discharges made into the sea. The amount of oil in water after
treatment is less than 5 ppm.
Wärtsilä Bilge Water Guard

Wärtsilä Bilge Water Guard is a fully automated bilge discharge
monitoring system which constantly oversees and monitors the oil
content in all discharges overboard.
Should the oil content rise above the set limit, the flow will be
rerouted back to the bilge tank. The system logs the discharge quantity
and oil content as well as time and location of the ship. All data is
stored in memory for later retrieval.
184
The system is enclosed in a locked, tamper-proof cabinet and all
accesses are logged in memory. For both crew members and ship
management, the Wärtsilä Bilge Water Guard provides a priceless
safety net and possibility to make evident the compliance with
applicable regulations.

Wärtsilä Slop Water Treatment System
The Wärtsilä slop water treatment system is designed to clean
water (deck washing water or rain) contaminated with oil or drilling
mud produced by offshore operational activity - enabling it to be
dischargeable to the sea without further treatment.
The system consists of two units – a MWD (Mud Water Decanter)
and SWC (Slop Water Cleaning) unit. In the first stage the MWD
separates the mud and oil from the water emulsion, and in the second
the SWC treats and discharges the emulsified water.
Slop water/mud is a waste stream which is produced when an oil/
synthetic/diesel drilling fluid becomes contaminated with water, and
is amongst the most significant waste streams from exploration and
development activities.
The system will significantly reduce drill slop sent offshore by as
much as 80–90%.
185
Sewage Treatment Plants
The Wärtsilä Hamworthy Super Trident sewage treatment plant
is the cost-effective and safe answer to disposing of waste at sea,
maintaining the quality of the world’s oceans.
Our STC-13 series of sewage treatment plants are certified to meet
IMO MEPC 227(64) guidelines, which will be applicable to new ships
whose keels will be laid on or after 1 January 2016.
Optimised for the treatment of black and grey wastewater flows,
and suitable for conventional gravity and vacuum fed collection
systems, all plants are controlled automatically. This allows unattended
operation, with reduced maintenance requirements and lower long-
term operating costs.
The systems are compact and modular in design, suitable for
between-deck installations, and are adaptable to customer new build
specifications.
Large ST-C sewage

treatment plant
Small STC-13 sewage

treatment plant
186
Membrane BioReactor (MBR) Systems
Wärtsilä Hamworthy MBR technology is based on biological
degradation and membrane separation and allows for the treatment of
grey and black water to satisfy the most stringent standards.
The process produces the highest quality discharge without
requiring any addition or generation of chemicals that are hazardous to
the environment or ship operation.
Effluent quality tests conducted by the US National Sanitary
Foundation on Wärtsilä Hamworthy MBR produced results exceeding
the most stringent future legislative pollutant standards envisaged. The
technology also achieved outstanding performance in Alaska under
the scrutiny of the local authority, USCG and USEPA studies over the
past seasons.
We also supply smaller, more compact versions of our MBR
systems. Wärtsilä Hamworthy miniMBR’s are ideal for use on smaller
cruise and naval vessels, plus ferries with up to a 200 complement, as
well as FPSOs and accommodation platforms.
MBR system
Membrane module for

larger vessels – each
system is tailored
in-house to bespoke
specifications
187
Wärtsilä Vacuum Collection Systems
The Wärtsilä vacuum collection system uses differential air pressure
to transport sewage from the toilet bowls, and other sanitary fittings,
to the Sewage Treatment Plant (STP) or independent collection tank.
Ejectors can be mounted direct to the STP for modular construction
without the need for a separate collection tank, and only a small amount
of flush water is needed compared to conventional gravity systems.
Features
zz Ejectors can be mounted direct to the STP for modular construction
without the need for a separate collection tank
zz Only a small amount of flush water is needed compared to
conventional gravity systems
zz Vertical Lift capability
zz Smaller diameter piping, independent of slope
zz Reduced peak loadings allow use of smaller sewage treatment
plant than for gravity systems
zz Ejector performance optimised using Computational Fluid
Dynamics (CFD)
Additional optional features
zz Grey water vacuum collection to separate grey water collection
tank(s)
zz Retrofit to existing tanks
zz Foam suppressant
zz PLC interface with data logger
zz Overboard discharge from vacuum circulation pump
zz Controlled feed/transfer equipment
Wärtsilä Vacuum Toilets

The Wärtsilä vacuum flush toilet has been designed to be mechanically
simple, operationally reliable, and stylish in appearance.
Wärtsilä vacuum toilets use air to drive waste from the toilet to the
treatment tank or intermediate collection tank. This contemporarily
styled toilet has a built-in vacuum breaker and flush memory, is simple
to install, and is supplied ready to connect. The control mechanism can
be accessed without removing the bowl. By using only approximately
1 litre of water, the amount of wastewater is dramatically reduced.
Wärtsilä also offers a Vacuum Interface Valve, which provides an
interface between the sewage collection system and conventional
188
grey water drains and urinals. The valve enables an easy connection
to gravity-based appliances, enabling cost savings and effective
integration with the vacuum system piping. The valve is reliable, easy
to maintain, and has been installed in USN/USCG ships and merchant
marine vessels throughout the world.
Features
zz Contemporary styling
zz Minimum space requirements
zz Low water consumption
zz Simple to install – supplied complete, ready to connect
zz Quiet operation
zz Maintenance in-situ
189
WÄRTSILÄ SHIP POWER WORLDWIDE
HEADQUARTERS CARIBBEAN
Wärtsilä Corporation Wärtsilä Caribbean Inc.
John Stenbergin ranta 2, P.O.Box 196, Services Office, Carolina
FI-00531 Helsinki, Finland Road 887 Km 0.6, Street A Lot 5
Tel.................................... +358 10 709 0000 Industrial Park Julio N. Matos
Fax................................... +358 10 709 5700 PR 00987 Carolina
P.O. Box 7039, PR 00986-7039 Carolina
Puerto Rico
CORPORATION NETWORK Tel...................................... +1 787 701 2288
Wärtsilä Ship Design – worldwide Fax..................................... +1 787 701 2211
E-mail..................... [email protected]
CHILE
ARGENTINA Wärtsilä Chile Ltd.
Wärtsilä Argentina S.A. Ship Power & Services Office Valparaíso
Services Office Buenos Aires, Avenida Brasil 2060, Valparaíso, Chile
Tronador 963, C1427CRS Buenos Aires, Tel...................................... +56 32 2570 600
Argentina Fax..................................... +56 32 2570 601
Tel.................................... +54 11 4555 1331
CHINA
AUSTRALIA Wärtsilä China Ltd.
Wärtsilä Australia Pty Ltd. Dalian
Ship Power & Services Office Perth, Office 606 Building B. Dalian International
19 Alacrity Place, WA 6166 Henderson, Ocean Building, No.11 Yu Guang Street,
Australia Zhongshan District, Dalian,
Tel...................................... +61 8 9410 1300 Liaoning Province 116001 P.R. China
Fax..................................... +61 8 9410 1811 Tel.................................. +86 411 8230 9819
Ship Power & Services Office Fax................................. +86 411 8230 9829
Huntingwood, Shanghai
48 Huntingwood Drive, NSW 2148 Building 11, No.170 Jin Feng Road, Pudong
Huntingwood, Australia New District, Shanghai 201201, P.R.China
Tel...................................... +61 2 9672 8200 Tel.................................... +86 21 5858 5500
Fax..................................... +61 2 9672 8585 Fax................................... +86 21 5858 9331
Shanghai, Ship Power Satellite Office
BRASIL Room G & H, 8th Floor, International Ocean
Wärtsilä Brasil Ltda. Shipping & Finance Centre, No. 720 Pudong
Ship Power, Ship Design & Services Avenue, Pudong New District,
Office Rio de Janeiro, Shanghai, 200120, P.R. China
Rua da Alfândega, 33, Centro, 20070-000 Tel.................................... +86 21 5877 8800
Rio de Janeiro, Brazil Fax................................... +86 21 5877 8655
Tel..................................... +55 21 22062500 Hongkong
TYTL 108RP Sai Tso Wan Road,
CANADA Tsing Yi Island, New Territories,
Wärtsilä Canada Inc. Hong Kong, P.R. China
Ship Power & Services Office Tel....................................... +852 2528 6605
7575 Transcanadienne, Suite 640 Fax...................................... +852 2529 6672
St. Laurent, Quebec H4T 1V6 Canada Wärtsilä Hamworthy
Tel...................................... +1 514 335 3150 Dalian
Fax..................................... +1 514 332 4173 Office 606 Building B. Dalian International
Services Office Vancouver British Ocean Building, No.11 Yu Guang Street,
Columbia Zhongshan District, Dalian,
1771 Savage Road Liaoning Province 116001 P.R. China
Richmond, BC V6V 1R1Canada Tel.................................. +86 411 8230 9819
Tel...................................... +1 604 244 8181 Fax................................. +86 411 8230 9829
Fax..................................... +1 604 244 1181
190
Guangzhou Wärtsilä Qiyao Diesel
Room 910, Fuying Building, No. 166 Company Ltd.
Changgand Rd, Haizhu district, No.2988, Jiangshan Rd , Lingang, Nanhui,
510250 Guangzhou, P.R. China Shanghai 201306 P.R. China
Tel.................................... +86 20 8435 1719 Tel.................................... +86 21 6828 4688
Fax................................... +86 20 8435 1695 Fax................................... +86 21 6828 4149
E-mail........................ [email protected] Wärtsilä Yuchai Engine Co., Ltd
Shanghai No.3 Qixing Road, Fushan Industrial Park,
4th Floor, Building 13, 170 Jin Feng Road, Doumen, Zhuhai, 519175, P.R. China
Pudong New District, Tel.................................... +86 756 5598 222
Shanghai 201201, P.R.China Fax................................... +86 756 5888 206
Tel.................................... +86 21 5858 5500
Winterthur Gas & Diesel
Fax................................... +86 21 5858 7992 (Shanghai) Co., Ltd.
Suzhou Unit 1101, 11F, Lujiazui Century Financial
No. 77 Hongxi Road, New District, Plaza, No. 799 South Yanggao Road
Suzhou, 215151, P. R. China Pudong New District, Shanghai,
Tel.................................. +86 512 6824 3108 200127 P.R. China
Fax................................. +86 512 6824 2709
E-mail..................... [email protected]
Winterthur Gas & Diesel
(Shanghai) Co., Ltd. – Dalian Office
Shipham Valves Office 1501 Building B,
4th Floor, Building 13, 170 Jin Feng Road, Dalian International Ocean Building,
Pudong New District, No.11 Yu Guang Street, Zhongshan District,
Shanghai 201201, P.R.China Dalian, Liaoning Province,
Tel.................................... +86 21 5858 5500 116001 P.R. China
Fax................................... +86 21 5858 7992
[email protected] COLOMBIA
Wärtsilä Services (Shanghai) Co., Wärtsilä Colombia S.A.
Ltd. (Guangzhou Nansha Branch) Services Office Bogotá
No.1-11A, Section B of Nansha Auto Park, Cra 19B # 83-63 Piso 5o, Bogotá, Colombia
Xin Guang 3rd Road, Tel........................................ +57 1 635 8168
Pearl River Management District, Tel........................................ +57 1 635 9382
Nansha Development Zone, Guangzhou, Mobile.............................. +57 318 716 4395
Guangdong Province 511462, P.R. China
Tel.................................... +86 20 3905 6288 CYPRUS
Fax................................... +86 20 3905 6299 Wärtsilä Cyprus
Wärtsilä Ship Design Services Office Limassol,
(Shanghai) Ltd. 9 Synergatismou Street,
3rd Floor, Building 13, No.170 Jin Feng CY-3010 Tsiflikoudia, Limassol, Cyprus
Road, Pudong New District, Tel...................................... +357 25 313 761
Shanghai 201201, P.R.China Fax..................................... +357 25 812 195
Tel.................................... +86 21 5858 5500 E-mail........................... [email protected]
Fax................................... +86 21 5858 9331
Wärtsilä CME Zhenjiang DENMARK
Propeller Co., Ltd. Wärtsilä Danmark A/S
8 JingSan Road, Ding Mao New District, Ship Power & Services Office
Zhenjiang Jiangsu Province, Copenhagen
212009 P.R.China H.C. Andersens Boulevard 11, 3. sal,
Tel.................................. +86 511 8451 1719 DK-1553 Copenhagen V, Denmark
Fax................................. +86 511 8451 2907 Tel....................................... +45 99 56 99 56
Wärtsilä Propulsion Wärtsilä Svanehøj A/S
(Wuxi) Co., Ltd. Fabriksvej 6, DK- 9230 Svenstrup J,
No.53 Xi Qin Road, Wuxi National High & Denmark
New Tech Development Area, Wuxi,Jiangsu Tel....................................... +45 96 37 22 00
Province 214028 P.R.China
Tel.................................. +86 510 6886 0218
Fax................................. +86 510 6886 0219
191
DOMINICAN REPUBLIC Services Office (Marseille)
Enceinte portuaire, Porte 4,
Wärtsilä Dominicana, SRL Chemin du Cap Janet CS 80263
Services Office Santo Domingo
FR-13344 Marseille cedex 15, France
C/El Recodo #4, Bella Vista, Santo Domingo,
Dominican Republic Ship Power, Tank Control Systems
Tel...................................... +1 809 564 4440 119 rue de Bitche, FR-62100 Calais, France
Fax..................................... +1 809 372 7968 Tel..................................... +33 321 96 49 93
Fax.................................... +33 321 34 36 12
Workshop
Km 13 ½ Aut. Duarte, Alameda
Santo Domingo Oeste
GERMANY
Dominican Republic Wärtsilä Deutschland GmbH
Tel..................................... + 1 809 561 2022 Ship Power & Services Office Hamburg
Fax.................................... + 1 809 372 7968 Schlenzigstrasse 6, D-21107 Hamburg,
Germany
ECUADOR Tel........................................+49 40 75190-0
Fax.............. +49 40 75190-245 (Ship Power)
Wärtsilä Ecuador S.A. Fax...................+49 40 75190-190 (Services)
Services Office & Workshop
E-mail....... [email protected]
Los Floripondios N57-112 y Leonardo
E-mail........ [email protected] (Services)
Murialdo Quito, Ecuador
Tel..................................... + 593 2 2811 215
Wärtsilä Serck Como GmbH
FINLAND Pankower Str. 16-18, 21502 Geesthacht,
Wärtsilä Finland Oy Germany
Ship Power & Services Office Helsinki Tel........................................+49 4152 805-0
John Stenbergin ranta 2 P.O.Box 196, Fax...................................+49 4152 805-105
FI-00531 Helsinki, Finland [email protected]
Tel.................................... +358 10 709 0000 [email protected]
Fax...............+358 10 709 5722 (Ship Power)
Fax................... +358 10 709 5700 (Services) GREECE
Ship Power & Services Office (Turku) Wärtsilä Greece S.A.
Stålarminkatu 45, P.O.Box 50, FI-20811 Ship Power & Services Office Piraeus
Turku, Finland 25 Akti Miaouli, P.O. Box 860 12, GR-18503
Tel.................................... +358 10 709 0000 Piraeus, Greece
Fax...............+358 10 709 3166 (Ship Power) Tel.................................... +30 210 413 5450
Fax..................... +358 2 234 2419 (Services) Fax................................... +30 210 411 7902
Ship Power & Services Office (Vaasa)
Tarhaajantie 2, P.O. Box 252,
ICELAND
FI-65101 Vaasa, Finland Vélar og Skip ehf.
Tel.................................... +358 10 709 0000 Ship Power & Services Office Reykjavik
Fax.................+358 6 356 7188 (Ship Power) Hólmaslóð 4, IS-101 Reykjavik, Iceland
Fax..................... +358 6 356 7374 (Services) Tel......................................... +354 562 0095
Fax........................................ +354 562 1095
FRANCE
INDIA
Wärtsilä France SAS
Ship Power Wärtsilä India Ltd.
3 boulevard de la Loire, P.O. Box 97511, Ship Power & Services Office
FR-44275 Nantes cedex 2, France Kesar Solitaire, 21st Floor, Plot No. 5,
Tel..................................... +33 240 41 16 02 Sector No. 19, Palm Beach Road, Sanpada,
Fax.................................... +33 240 41 16 00 400 705 Navi Mumbai, India
Ship Power & Services Office (Surgères) Tel...........................+91 22 2781 8300/8550
La Combe, P.O. Box 113, Fax................................... +91 22 2781 8468
FR-17700 Surgeres cedex, France
Tel..................................... +33 546 30 31 32
Fax.................................... +33 546 30 31 19
192
Wärtsilä Hamworthy Pvt. Ltd. KOREA
35, Mittal Chambers, Nariman Point,
Wärtsilä Korea Ltd.
400 021 Mumbai, India Ship Power
Tel................................+91 22 30287711-15 15-36, Gangbyeon-daero 456 beon-gil,
Fax.................................... +91 22 30287710 Sasang-gu, Busan, 617-831, Korea
E-mail......................... [email protected] Tel...................................... +82 51 329 0500
Fax..................................... +82 51 324 4349
INDONESIA
Winterthur Gas & Diesel Korea Ltd.
P.T. Wärtsilä Indonesia 15-36, Gangbyeon-daero 456 beon-gil,
Ship Power & Services Office Bekasi
Sasang-gu, Busan, 617-831, Korea
Cikarang Industrial Estate, JL. Jababeka
Tel...................................... +82 51 320 9800
XVI, Kav. W-28, Bekasi 17530, Jawa Barat,
Fax..................................... +82 51 320 9888
17530 Bekasi, Indonesia
Tel..................................... +62 21 893 76 54
Fax.................................... +62 21 893 76 61
MALAYSIA
Wärtsilä Malaysia Sdn Bhd
ITALY Services Sales Office
Suite C 10-05, Plaza Mont Kiara,
Wärtsilä Italia S.p.A. n° 2 Jalan - Kiara, 50480
Ship Power & Services Office Genova
Kuala Lumpur, Malaysia
Tel.................................... +39 010 599 5800
Tel........................................+603-62035072
Fax, Sales......................... +39 010 247 2341
Fax.......................................+603-62035064
Fax, Field Services............ +39 010 599 5830
E-mail
Ship Power & Services Office Trieste [email protected]
Bagnoli della Rosandra, 334, San Dorligo
della Valle, IT-34018 Trieste, Italy MEXICO
Tel.................................... +39 040 319 5000
Fax..................................... +39 040 827 371 Wärtsilä Mexico S.A. de C.V.
Services Office Cd. Del Carmen
JAPAN Services Office and Workshop
Av. Edzna #7 Int. 3,Col. Mundo Maya,
Wärtsilä Japan Ltd. Cd. del Carmen, Campeche,
Ship Power México C.P. 24150
Yaesu MID Bldg 5F, 1-11-2 Kyobashi, Tel.................................. +521 938 138 1500
Chuo-ku, 104-0031 Tokyo, Japan Fax................................. +521 938 131 1517
Tel...................................... +81 3 5159 8700
Fax..................................... +81 3 5159 8710 MOROCCO
Ship Power
6-7-2 Minatojima, Chuo-ku,
Société Salva
Ship Power & Services Sales Office
650-0045 Kobe, Japan
93 Boulevard de la Résistance ,
Tel...................................... +81 78 304 7511
21700 Casablanca, Morocco
Fax..................................... +81 78 302 5143
Tel.................................... +212 5 2230 4038
Imabari Office: Fax................................... +212 5 2230 5717
1-3-3 Kyouei-chou Imabari 794-0024, Japan
Tel...................................... +81 898 35 4822 NETHERLANDS
Fax..................................... +81 898 35 4821
Wärtsilä Netherlands B.V.
Seals & Bearings Product Company Ship Power and Propulsion Services
Japan (PCJP)
Lipsstraat 52, P.O. Box 6, 5150 BB Drunen,
14-37, 7-Chome, 1000 Mukaishinjyo-Machi,
Netherlands
930-0916 Toyama, Japan
Tel...................................... +31 416 388 115
Tel...................................... +81 76 451 3150
Fax..................................... +31 416 373 162
Fax..................................... +81 76 451 3161 Note: Please check actual address when
Winterthur Gas & Diesel Japan Ltd. visiting Drunen, this address will change 2nd
6-7-2, Minatojima, Chuo-ku, half of 2015!
650-0045 Kobe, Japan
Tel...................................... +81 78 306 2910
Fax..................................... +81 78 306 2912
193
Ship Power PANAMA
Hanzelaan 95, P.O. Box 10608, 8000 GB
Zwolle, Netherlands
Wärtsilä Panama, S.A.
Services Office Veracruz
Tel...................................... +31 38 425 3253
Panama Pacifico Flex #2 - Local #3-
Fax..................................... +31 38 425 3352
Brujas Ave., Business International Park.
Former Howard Air Force Base
NORWAY Corregimiento de Veracruz
Wärtsilä Norway AS Distrito de Arraiján, Panama, Rep. of Panama
Ship Power Tel......................................... +507 304 7400
Stenersgata 2, N-0028 Oslo, Norway Fax........................................ +507 304 7494
Tel....................................... +47 53 42 28 40 E-mail......................... [email protected]
E-mail.................... [email protected]
Ship Power PAPUA NEW GUINEA
• Karmsundsgaten 77,
Wärtsilä PNG Ltd
5531 Haugesund, Norway Services Office Papua New Guinea
• Rubbestadneset, Warehouse 5, Unit 9, Section 36
N-5420 Rubbestadneset, Norway Allotment 5 Kitty Hawk Street
• Meatjønnsvegen 74 6 Mile, Port Moresby NCD 121
N-5412 Stord, Norway Papua New Guinea
• Stiklestadveien 1, Tel......................................... +675 323 7375
N-7041 Trondheim, Norway Fax........................................ +675 323 7540
• Dalhaugane 2, Postal address: PO Box 379,
N-5489 Bønes, Norway Port Moresby NCD 121, Papua New Guinea
Tel....................................... +47 53 42 25 00
Fax...................................... +47 53 42 25 01 PERU
Wärtsilä Moss AS Wärtsilä Peru S.A.C.
Værftsgata 13, PO Box 1053, Ship Power & Services Office Lima
1510 Moss, Norway Av. Ricardo Palma 341,
Tel....................................... +47 69 27 99 00 Centro Empresarial Platino, Piso 6,
Fax...................................... +47 69 25 45 78 Oficina 604, Miraflores, Lima 18, Peru
E-mail............................. [email protected] Tel........................................ +51 1 241 7030
Wärtsilä Oil & Gas Systems AS Fax....................................... +51 1 444 6867
Solbraaveien 10, PO Box 144,
1371 Asker, Norway PHILIPPINES
Tel........................................ +47 815 48 500 Wärtsilä Philippines Inc.
Fax....................................... +47 815 48 510 Ship Power & Services Office Laguna
[email protected] No 6. Diode Street, Light Industry and
E-mail............................. [email protected] Science Park, Bo. Diezmo, Cabuyao, 4025
Wärtsilä Ship Design Norway AS Laguna, Philippines
Havnavegen 90, N-5419 Fitjar, Norway Tel........................................ +63 2 843 7301
Tel....................................... +47 53 45 70 00 Fax..................................... +63 49 543 0381
Fax...................................... +47 53 45 80 01
POLAND
PAKISTAN Wärtsilä Polska Sp. z o.o.
Wärtsilä Pakistan (Pvt) Ltd. Ship Power
Services Office, Lahore Pakistan Ul. Twarda 12, 80-871 Gdansk, Poland
16 km Raiwind Road Lahore, Pakistan Tel..................................... +48 58 347 85 00
Tel..................................... +92 42 35905900 Fax.................................... +48 58 347 85 20
Fax.................................... +92 42 35905952 [email protected]
Services Office Karachi Pakistan Wärtsilä Ship Design
F-8 KDA Scheme 1, Tipu Sultan Road, Poland Sp.z o.o.
Karachi Pakistan Ul. Luzycka 2, 81-537 Gdynia, Poland
Tel..................................... +92 21 34375830 Tel..................................... +48 58 622 63 13
Fax.................................... +92 21 34375822 Fax.................................... +48 58 622 62 65
[email protected]
194
Wärtsilä Baltic Design Wärtsilä Pumps Pte Ltd
Centre Sp. z o.o. 15 Benoi Crescent, 629978 Singapore,
Ul.Luzycka 6e, 81-537 Gdynia, Poland Singapore
Tel./Fax.............................. +48 58 718 61 50 Tel......................................... +65 6261 6066
E-mail............................. [email protected] Fax........................................ +65 6261 6011
E-mail...................... [email protected]
PORTUGAL
Wärtsilä Portugal, Lda. SERBIA
Services Office Maia Wärtsilä Ship Design Serbia d.o.o
Zona Industrial da Maia I, Sector X, Vrsacka 67, 21000 Novi Sad, Serbia
Lote 363, P.O. Box 1415, Tel....................................... +381 21 500101
PT-4471-909 Maia, Portugal
Tel.................................... +351 22 943 9720 SOUTH AFRICA
Fax................................... +351 22 943 9729 Wärtsilä South Africa (Pty) Ltd.
E-mail......................... [email protected] Ship Power
20 Dorsetshire Street, P.O. Box 356, Cape
ROMANIA Town Paarden Eiland Paarden Eiland 7420,
Wärtsilä Hungary Kft. Budaors South Africa
Sucursala Constanta Tel...................................... +27 21 511 1230
Santierul Naval Constanta, Fax..................................... +27 21 511 1412
Cladirea Administrativa TA, Cam 2, ETJ 2,
Incinta Port Constanta SPAIN
900900, Romania
Wärtsilä Ibérica S.A.
Ship Power & Services Office Bermeo
RUSSIA Poligono Industrial Landabaso s/n,
Wärtsilä Vostok LLC ES-48370 Bermeo, Spain
Ship Power & Services Office Tel...................................... +34 946 170 100
St. Petersburg Fax.................+34 946 170 105 (Ship power)
Business centre Linkor 36 A Fax..................... +34 946 170 104 (Services)
Petrogradskaya naberezhnaya, Industrial Operations - Propellers
197101 St. Petersburg, Russia Avda. Juan Carlos 1, No. 3,
Tel...................................... +7 812 448 3248 ES-39600 Maliaño, Spain
Fax..................................... +7 812 448 3241 Tel...................................... +34 946 170 100
Ship Power & Services Office Fax..................................... +34 942 254 548
Vladivostok E-mail....................... [email protected]
Utkinskaya St 9, 690091 Vladivostok, Russia
Tel....................................... +7 4232 401600 SRI LANKA
Fax...................................... +7 4232 432004
Wärtsilä Lanka (Pvt) Ltd
SINGAPORE 77 Negombo Road, Wattala, Sri Lanka
Tel....................................... +94 11 2980907
Wärtsilä Singapore Pte Ltd. Fax...................................... +94 11 4816422
14 Benoi Crescent, 629977 Singapore,
Singapore SWEDEN
Tel......................................... +65 6265 9122
Fax........................................ +65 6264 0802 Wärtsilä Sweden AB
Services Office Gothenburg
E-mail............... [email protected]
Götaverksgatan 10, P.O.Box 8006,
Wärtsilä Ship Design 402 77 Gothenburg, Sweden
Singapore Pte Ltd. Tel...................................... +46 31 744 4600
14 Benoi Crescent, 629977 Singapore, Fax..................................... +46 31 744 4670
Singapore
Tel......................................... +65 6562 1138 SWITZERLAND
Fax........................................ +65 6562 1238
E-mail..... [email protected]
Wärtsilä Services Switzerland Ltd
Schützenstrasse 12
8401 Winterthur, Switzerland
195
Winterthur Gas & Diesel Ltd. Ship Power, Tank Control Systems
Schützenstrasse 1-3, 8401 Winterthur No. 28 Northfield way, Aycliffe Industrial
P.O. Box 414 Estate, Newton Aycliffe Durham DL5 6UF,
Tel.................................. +41 (0)52 262 4922 United Kingdom
Fax................................. +41 (0)52 212 4917 Tel.................................... +44 1325 327 299
Fax................................... +44 1325 310 808
TAIWAN E-mail................ [email protected]
Wärtsilä Taiwan Ltd. Wärtsilä Krystallon Ltd
Ship Power & Services Office Taipei Channel View Road, Dover Kent CT17 9TP,
4F., No. 68, Sec. 2, Zhongshan N. Road, United Kingdom
Zhongshan District, Taipei City, Taiwan Tel..................................... +44 1304 245820
Tel.................................... +886 2 2522 2239 [email protected]
Fax................................... +886 2 2522 2550 Wärtsilä Water Systems Ltd
Fleets Corner, Poole Dorset BH17 0JT,
TURKEY United Kingdom
Wärtsilä Enpa Dis Ticaret A.S. Tel..................................... +44 1202 662600
Ship Power & Services Office Tuzla Fax.................................... +44 1202 668793
Aydintepe Mah. D100 Karayolu Cad. No: E-mail...... poolesparesenquiries@hamworthy.
14/E Bahar Is Merkezi , com
34947 Tuzla Istanbul, Turkey
Tel.................................... +90 216 494 5050
John Mills Valves
509 Shields Road, Walkergate, Newcastle
Fax................................... +90 216 494 5048
Upon Tyne NE6 4PX, United Kingdom
UNITED ARAB EMIRATES Tel..................................... +44 191 2656550
Fax.................................... +44 191 2651002
Wärtsilä Gulf FZE [email protected]
Ship Power
Plot 597-572, Dubai Investment Park 2, Shipham Valves
P.O.Box 61494, Dubai, United Arab Emirates Hawthorn Avenue, Hull East Yorkshire
Tel...................................... +971 4 885 7222 HU3 5JX, United Kingdom
Fax..................................... +971 4 885 7020 Tel..................................... +44 1482 323163
Fax.................................... +44 1482 224057
Wärtsilä Hamworthy [email protected]
Middle East FZE
P.O. Box 120691, W/H P6-86, SAIF Zone, U.S.A.
Sharjah, United Arab Emirates
Tel....................................... +971 655 74806 Wärtsilä North America, Inc.
Fax...................................... +971 655 74807 Branch Office Annapolis
[email protected] 900 Bestgate Road, Suite 400, Annapolis
Maryland MD 21401, USA
UNITED KINGDOM Tel...................................... +1 410 573 2100
Fax..................................... +1 410 573 2200
Wärtsilä UK Ltd.
Ship Power & Seals and Bearings Branch Office Ft. Lauderdale
Product Company UK (PCUK) 2900 SW 42nd Street, FL 33312
4 Marples Way, Havant Hampshire Ft. Lauderdale, USA
PO9 1NX, United Kingdom Tel...................................... +1 954 327 4700
Tel................................... +44 239 240 01 21 Fax..................................... +1 954 327 4773
Fax.................................. +44 239 249 24 70 North America Headquarters
Ship Power & Services Office Aberdeen 16330 Air Center Boulevard, TX 77032
(Engine Services) Houston, USA
11a Peterseat Drive, Altens Industrial Estate, Tel...................................... +1 281 233 6200
Aberdeen Altens AB12 3HT, United Kingdom Fax..................................... +1 281 233 6233
Tel.................................... +44 1224 871 166 Branch Office Long Beach
Fax................................... +44 1224 871 188 4007 Paramount Blvd., Suite 3
Lakewood, CA 90712
Tel...................................... +1 281 233 6200
196
Branch Office New Orleans CSSC Guangzhou Marine Diesel
1313 MacArthur Ave Engine Co., Ltd (GMD)
Harvey, LA 70058 USA No.362, Tan Xin Gong Road, Da Gang, Pan
Tel...................................... +1 504 733 2500 Yu District, Guang Zhou, 511470
Fax..................................... +1 504 734 7730 Tel................................... + 86 20 3498 5158
Branch Office Seattle Fax.................................. + 86 20 8436 1628
3257 17th Ave. West, Building 3 CSSC Marine Power Co., Ltd (CMP)
Seattle, WA 98119 USA Changjiang Road No. 402, Zhenjiang,
Tel...................................... +1 425 640 8280 Jiangsu 212002
Fax..................................... +1 425 640 5162 Tel.................................. +86 511 8451 1273
Wärtsilä Defence Inc., Fax................................. +86 511 8451 0033
Cheseapeake
Ship Power & Services Office Dalian Marine Diesel Works (DMD)
3617 Koppens Way, No.1-2 Hai Fang Street, 116021 Dalian
Chesapeake Virginia 23323, USA Tel.................................. +86 411 8441 7273
Tel...................................... +1 757 485 5275 Fax................................. +86 411 8441 7499
Fax..................................... +1 757 558 3627
Hefei Rong’an Power Machinery
Wärtsilä Defence Inc., Poulbo Co Ltd. (RPM) Hefei Works
Ship Power & Services Office No. 9166 Susong Rd,
26264 Twelve Trees Lane, Poulsbo Hefei Economic and Technological
Washington 98370-9435, USA Development Area, 230601 Hefei
Tel...................................... +1 360 779 1444 Tel.................................. +86 551 6878 8888
Fax..................................... +1 360 779 5927 Fax................. +86 551 6878 8888 ext. 1001
Wärtsilä Defence Inc., San Diego Hudong Heavy
1313 Bay Marina Drive Machinery Co Ltd. (HHM)
National City, CA 91950 USA 2851 Pudong Dadao, 200129 Shanghai
Tel...................................... +1 281 233 6200 Tel.................................... +86 21 5131 0000
Fax................................... +86 21 5846 2023
VENEZUELA Jiangsu Antai
Wärtsilä Venezuela C.A. Power Machinery Co., Ltd (JAD)
Calle 132, C.C.P. La Trigaleña Plaza, No. 9, Liuzhugang Road, Xingang Park Zone
Piso 2, Ofic. 10. Jingjiang City, Jiangsu Province
Valencia, Venezuela. Zona Postal 2001. Tel................................. +86 523 823 558 88
Tel.................................... +58 241 774 7033 Fax................................ +86 523 823 559 35
Fax................................... +58 241 842 2189 Qingdaohaixi Marine Diesel Ltd.
(QMD)
VIETNAM 501 Li Jiang East Rd, Economic and
Wärtsilä Vietnam Co., Ltd Technological Development Zone,
Saigon Trade Center, Unit 1901, 19th Floor, Qingdao 266520
37 Ton Duc Thang Street, Ben Nghe Ward, Tel.................................. +86 532 8670 8080
District 1, Ho Chi Minh City, Vietnam Fax........................+86 532 8670 8080 - 788
Tel...................................... +84 8 2220 0718 Yichang Marine Diesel
Fax..................................... +84 8 2220 0719 Engine Co Ltd. (YMD)
[email protected] 93, Xiling 2 Road, 443 002 Yichang
Tel.................................+86 717 646 8882
WÄRTSILÄ TWO-STROKE Fax................................+86 717 646 9152
ENGINE LICENSEES Yuchai Marine

Power Co Ltd (YCMP)
Fushan Industrial Park, Zhuhai,
CHINA Guangdong Province, 519175
CSSC-MES Diesel Co Ltd. (CMD) Tel.................................+86 756 588 8600
No.6, Xinyuan Rd (S), Lingang Fax................................+86 756 588 8985
Shanghai, 201306
Tel.................................... +86 21 6118 6666
Fax................................... +86 21 6118 8088
197
CROATIA Mitsubishi Heavy Industries
Marine Machinery & Engine Co.,
3. Maj Engines & Cranes Ltd.
Joint Stock Co. (Marine Engine Division)
Liburnijska 3, PO Box 197, 51000 Rijeka 1-1 Wadasaki-cho 1-chome, Hyogo-ku,
Tel.................................. +385 (0)51 611 030 Kobe, Hyogo Prefecture
Fax................................. +385 (0)51 611 600 Tel...... +81 78-672-3790 Fax: 078-672-3705
JAPAN For the works of:
Mitsubishi Heavy Industries, Ltd.
Diesel United, Ltd. (Head Office) (Kobe Shipyard & Machinery Works)
8th Floor, Prime Kanda Building 1–1, Wadasaki-Cho 1-chome
8, 2-chome, Kanda Suda-cho Hyogo-ku, Kobe 652–8585
Chiyoda-ku, Tokyo 101–0041 Tel...................................+81 78 672 3771
Tel...................................+81 3 3257 8222 Fax..................................+81 78 672 3705
Fax..................................+81 3 3257 8220
For the works of:
KOREA
Diesel United, Ltd. (Aioi Works) Hyundai Heavy Industries Co. Ltd.
5292 Aioi, Aioi City, Hyogo Pref. 678–0041 1000, Bangeojinsunhwan-doro, Dong-gu,
Tel...................................+81 791 24 2650 Ulsan, 682-792
Fax..................................+81 791 24 2648 Tel. Domestic:..................... +82 52 202 7291
Fax Domestic:.................... +82 52 202 7300
Hitachi Zosen Corporation Tel. Export:......................... +82 52 202 7281
(Head Office) Fax Export:......................... +82 52 202 7427
7–89, Nanko-kita, Suminoe-ku
Doosan Engine Co. Ltd.
Osaka 559–8559
18, Gongdan-ro 21 beon-gil, Seongsan-gu,
Tel...................................+81 6 6569 0001
Changwon-si, Gyeongnam, 642-370
Fax..................................+81 6 6569 0002
Tel. Domestic & Overseas... +82 55 260 6641
For the works of: Fax Domestic & Overseas... +82 55 260 6381
Hitachi Zosen Corporation
Nagasu-machi, Tamana-gun POLAND
Kumamoto 869–0113
Tel...................................+81 968 78 2179
H. Cegielski-Poznań SA (HCP SA)
ul. 28 Czerwca 1956 r. nr 223/229
Fax..................................+81 968 78 7037
61-485 Poznań
Hitachi Zosen Corporation Tel...................................+48 61 831 1102
(Tokyo Office) Fax..................................+48 61 831 1443
15th floor, Omori Bellport,
26–3, Minami-Ohi, 6-chome RUSSIA
Shinagawa-ku, Tokyo 140–0013
Tel...................................+81 3 6404 0800 Bryansk Engineering Works (BMZ)
Ulyanova Street, 26, 241015 Bryansk
Fax..................................+81 3 6404 0809
Tel...................................+7 4832 548 180
Mitsubishi Heavy Industries, Ltd. Fax..................................+7 4832 687 829
(Head office)
Mitsubishijuko Yokohama Bldg. VIETNAM
-1, Minatomirai 3-chome, Nishi-ku Vietnam Shipbuilding Industry
Yokohama, Kanagawa, 220-8401 Corporation (Vinashin)
Tel...................................... +81 45 200 6195 172 Ngoc Khanh Str, Badinh Dist, Hanoi
Fax..................................... +81 45 200 7189 Tel.....................................+84 437711212
Mitsubishi Heavy Industries Fax....................................+84 437711535
Marine Machinery & Engine Co.,
Ltd.
(Head office)
1-1 Akunoura-Machi, Nagasaki, 850-8610
Tel....... +81 95-828-6970 Fax:095-828-6633
198
Information in this publication is subject to change without notice.
©2015 Wärtsilä Corporation. All rights reserved.
199
05.2015
Wärtsilä is a global leader in complete lifecycle
power solutions for the marine and energy markets.
By emphasising technological innovation and total
efficiency, Wärtsilä maximizes the environmental and
economic performance of the vessels and power
plants of its customers.
In 2014, Wärtsilä’s net sales totalled EUR 4,779 million
with approximately 17,700 employees. The company
has operations in more than 200 locations in nearly 70
countries around the world. Wärtsilä is listed on the
NASDAQ OMX Helsinki, Finland.
WÄRTSILÄ® is a registered trademark. Copyright © 2015 Wärtsilä Corporation.
wartsila.com

Brochure Marine Solutions 2015

Uploaded by

Copyright:

Available Formats

Brochure Marine Solutions 2015

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Brochure Marine Solutions 2015

Uploaded by

Copyright:

Available Formats

2015

Electrical & Automation 8

Ballast Water Management 14

Electrical & Automation 24

Engines and Generating Sets 38

Exhaust Gas Cleaning 90

Inert Gas Systems 96

Oil & Gas Systems 102

Pumps & Valves 156

Seals, Bearings & Sterntubes 166

Ship Design 176

Waste, Oil & Fresh Water Management 182

Wärtsilä Ship Power Worldwide 190

With the acquisition of L-3 Marine Systems International (L-3 MSI)

We at Wärtsilä understand your business drivers and we strive to

Project Development Services

BALLAST WATER MANAGEMENT

By virtue of Wärtsilä AQUARIUS® BWMS range modular design, the

AQ-80-UV 50-80 19.0

AQ-125-UV 80-125 19.0

AQ-180-UV 125-180 38.6

AQ-250-UV 180-250 40.1

AQ-300-UV 250-300 48.7

AQ-375-UV 300-375 47.3

AQ-430-UV 375-430 52.5

AQ-500-UV 430-500 62.6

AQ-550-UV 500-550 93.2

AQ-750-UV 550-750 93.2

AQ-850-UV 750-850 100.0

Wärtsilä Control and Communication Center – 3C

The multifunction displays (widescreen TFT) present:

Wärtsilä Integrated Automation Systems

Wärtsilä Power Management System

Wärtsilä Remote Monitoring and

from single phase to a symmetrical 3-phase load, and compensate for

Wärtsilä Low Loss Concept

Wärtsilä Medium Voltage Power Drive

Wärtsilä passive rectifier

Wärtsilä Multidrive systems, DC sources

In max Wärtsilä passive Wärtsilä active

Wärtsilä MSS36 Switchboard – LV

Wärtsilä McSet Switchboard – MV

Engine dimensions (mm) and weights (tonnes)

Wärtsilä 34DF IMO Tier III, EPA T2/T3

Engine dimensions (mm) and weights (tonnes)

Dimensions (mm) and weights (tonnes)

Wärtsilä 50DF IMO Tier III, EPA T2/T3

Engine dimensions (mm) and weights (tonnes)

Dimensions (mm) and weights (tonnes)

Wärtsilä 26 IMO Tier II

Dimensions (mm) and weights (tonnes)

Dimensions (mm) and weights (tonnes)

Wärtsilä 38 IMO Tier II

Dimensions (mm) and weights (tonnes)

Dimensions (mm) and weights (tonnes)

Specific fuel oil and gas energy consumption

ISO standard reference conditions

benefits of pre-engineering include readily available documentation,

Pre-Engineered Medium-Speed Generating Sets