Scribd Logo
Upload

Welcome to Scribd!

  • 273 views

    Control Valve Failure Relief Rate - Liquid Service

    Uploaded by

    Saeid Rahimi Mofrad
    The document provides technical specifications and calculations for a control valve and associated piping on a process unit. It includes data like the valve size and flow rate, upstream and downstream pressures, piping dimensions and fittings, and calculations of properties like pressure drops and velocities. The results show a valve differential pressure of 38.64 bar, upstream inlet pressure of 44.59 bar, and downstream outlet pressure of 5.95 bar.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    Control Valve Failure Relief Rate - Liquid Service

    Uploaded by

    Saeid Rahimi Mofrad
    273 views2 pages
    The document provides technical specifications and calculations for a control valve and associated piping on a process unit. It includes data like the valve size and flow rate, upstream and downstream pressures, piping dimensions and fittings, and calculations of properties like pressure drops and velocities. The results show a valve differential pressure of 38.64 bar, upstream inlet pressure of 44.59 bar, and downstream outlet pressure of 5.95 bar.

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides technical specifications and calculations for a control valve and associated piping on a process unit. It includes data like the valve size and flow rate, upstream and downstream pressures, piping dimensions and fittings, and calculations of properties like pressure drops and velocities. The results show a valve differential pressure of 38.64 bar, upstream inlet pressure of 44.59 bar, and downstream outlet pressure of 5.95 bar.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    273 views2 pages

    Control Valve Failure Relief Rate - Liquid Service

    Uploaded by

    Saeid Rahimi Mofrad
    The document provides technical specifications and calculations for a control valve and associated piping on a process unit. It includes data like the valve size and flow rate, upstream and downstream pressures, piping dimensions and fittings, and calculations of properties like pressure drops and velocities. The results show a valve differential pressure of 38.64 bar, upstream inlet pressure of 44.59 bar, and downstream outlet pressure of 5.95 bar.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 2

    PROJECT : PROJ. NO.

    : CLIENT : UNIT :

    DATE : BY : REV : DOC NO.: Control Valve Failure Relief Rate (Incompressible Flow)

    03-May-13 S.Rahimi A

    Process Data Valve Full Open (Rated) CV Fluid Mass Density Fluid Viscosity Valve Upstream Pressure Valve Downstream Pressure Valve Differential Pressure Valve Calculated CV Flow Rate Flow Rate Valve Suction Data * Source Pressure * Static Head * Exchanger Pressure Drop * Other Losses * Metering Loss

    Unit --3 kg/m Cp bara bara bar --Kg/h m3/h

    12.00 922.50 0.21 44.59 5.95 38.64 12.00 61995 67.20

    bara m bar bar bar

    45.000 0.000 0.000 0.000 0.000

    Suction Side Fitting Data Pipe Length Nominal Pipe Size Pipe Schedule No. Pipe Roughness (DEF.) Fittings Quantity * tee flow thru * tee branch * elbow 90 deg LR * elbow 90 deg screwed * elbow 45 deg LR * elbow 45 deg screwed * close pattern return bend * gate valve * ball valve * globe valve * angle valve * butterfly valve (2" - 8") * butterfly valve (10" - 14") * butterfly valve (16" - 24") * check valve swing * check valve lift * check valve stop lift * check valve tilting disk * foot valve hinged disc * foot valve poppet disc * reducer / expander * entrance (projecting) * entrance (sharp-edged) * entrance (flush) * exit (projecting) * exit (sharp-edged) * exit (rounded)

    m inch ---inch no. no. no. no. no. no. no. no. no. no. no. no. no. no. no. no. no. no. no. no. no. no. no. no. no. no. no.

    26 3 std 0.00180 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0

    Suction Side Calculation Results Pipe Internal Diameter Velocity Reynolds No. Friction Factor Total Pipe Loss Total Fitting Loss Inlet Pressure

    mm m/s

    m m bara

    77.93 3.91 1339789 0.0173 4.512 0.000 44.59

    www.chemwork.org

    PROJECT : PROJ. NO.: CLIENT : UNIT : Valve Discharge Data * Destination Pressure * Static Head * Exchanger Pressure Drop * Other Losses * Metering Loss

    DATE : BY : REV : DOC NO.:

    03-May-13 S.Rahimi A

    bara m bar bar bar

    4.500 10.000 0.000 0.000 0.000

    Discharge Side Fitting Data Pipe Length Nominal Pipe Size Pipe Schedule No. Pipe Roughness (DEF.) Fittings Quantity * tee flow thru * tee branch * elbow 90 deg LR * elbow 90 deg screwed * elbow 45 deg LR * elbow 45 deg screwed * close pattern return bend * gate valve * ball valve * globe valve * angle valve * butterfly valve (2" - 8") * butterfly valve (10" - 14") * butterfly valve (16" - 24") * check valve swing * check valve lift * check valve stop lift * check valve tilting disk * foot valve hinged disc * foot valve poppet disc * reducer / expander * entrance (projecting) * entrance (sharp-edged) * entrance (flush) * exit (projecting) * exit (sharp-edged) * exit (rounded) Discharge Side Calculation Results Pipe Internal Diameter Velocity Reynold 's No. Friction Factor Total Pipe Loss Total Fitting Loss Outlet Pressure General Notes

    m inch ---inch no. no. no. no. no. no. no. no. no. no. no. no. no. no. no. no. no. no. no. no. no. no. no. no. no. no. no.

    35 3 std 0.00180 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0

    mm m/s

    m m bara

    77.93 3.9 1339789 0.0173 6.074 0.000 5.95

    www.chemwork.org

    You might also like