Batteries & Other Energy Storage Devices

July 2022
Common Table Sugar Key to Allaying Safety Concern in Aqueous Zinc Batteries

Researchers designed a sucrose-modified aqueous electrolyte that increases the mobility of zinc ion in response to the electric field and successfully achieves dendrite-free zinc batteries without compromising electrochemical performance.

­Due to their low cost and environmental friendliness, aqueous zinc batteries have the potential to play an important role in future energy storage systems for applications like the power grid. However, a safety concern has slowed the progress of this emerging technology. In a July 28 study published
. . . Learn More
Date:
07/29/2022
UnitedSiC (now Qorvo) Extends Highest-performance, Most Efficient 750V SiC FET Portfolio

UnitedSiC (now Qorvo) Extends Highest-performance, Most Efficient 750V SiC FET Portfolio for Power Designs

­Qorvo announced seven 750V silicon carbide (SiC) FETs in the surface mount D2PAK-7L package. With this package option, Qorvo’s SiC FETs are tailored for the rapidly growing applications of onboard chargers, soft-switched DC/DC converters, battery charging (fast DC and industrial) and IT/server powe
. . . Learn More
Date:
07/26/2022
ZapBatt, Toshiba Unlock Lithium Titanium Oxide Battery Technology for Micro-mobility

Charlie Welch, the co-founder and CEO of ZapBatt

­As companies emphasize the importance of micro-mobility initiatives in urban areas ZapBatt has partnered with Toshiba (TOSBF), merging its proprietary Artificial intelligence (AI) software technology and next-gen battery hardware with Toshiba’s lithium titanium oxide (LTO) battery cells to
. . . Learn More
Date:
07/19/2022
Battery-grade Lithium Hydroxide Produced in a Test Program Based on Ore from Keliber's Largest Deposit

Hannu Hautala, CEO, Keliber

­Keliber has completed a four-phase pilot-scale test programme and verified the behaviour of the ore from the company's largest deposit, Rapasaari, at all stages of the production process. A similar pilot-scale test programme has previously been carried out using ore from Syväjärvi, the mine where quarrying wil
. . . Learn More
Date:
07/06/2022
­12 Watt DC/DC Converters (SIP-8) for Industrial Applications

Traco Power’s TMR 12WI series

  The product offers a very high power density of 4.73W/cm³ in an ultra-compact SIP-8 metal package occupying only 2.0 cm² (0.3 square inch) of board space.   An excellent efficiency of up to 90% allows for an extended operating temperature range of –40° to +65°C without derating under
. . . Learn More
Date:
07/04/2022
Batteries and Energy Storage

Kevin Parmenter, Director, Applications Engineering. TSC, America

­Batteries are a hot topic. Prior to the pandemic, I counted about 355 battery-centric events being held worldwide over a year-long period – almost one a day. This comes as no surprise since the global battery market was valued at USD 108.4 billion in 2019 and is expected to have a compound annual growth ra
. . . Learn More
Date:
07/01/2022
Next-Generation Battery Management System Architectures

Click image to enlarge

Next-Generation Battery Management System Architectures

­DC fast chargers take between 30 to 45 minutes to charge the battery to 80 percent. This fast charging process generates a significant amount of heat, because the internal resistance to the high current generates a temperature rise. For a typical 400 V EV battery, therefore, the charging rate is limited by se
. . . Learn More
Date:
07/01/2022
More Bang for Your Boost

Click image to enlarge

Figure 1. Evaluation kit of the ADP1612

­The ADP1612 is a low-cost, high-efficiency boost converter that operates at 1.3MHz. It has a shutdown pin that reduces the quiescent current to less than 2 μA and operates with an input voltage down to 1.8 V making it ideal for battery-powered electronics. However, as the battery voltage drops, it
. . . Learn More
Date:
07/01/2022
Why Lithium is Taking Over Stationary Energy Storage

Click image to enlarge

Figure 1: This chart contains the most common commercialized sub-chemistries of lithium-ion batteries. Different applications require different performance characteristics and can be better served by selecting the correct chemistry.

­Today, you don't have to look very far to find a device that is powered by a lithium-ion battery. Chances are, you've got one in your pocket, or sitting somewhere on your desk. You might be reading this article using a lithium-ion powered device! Lithium-ion batteries are the hidden power source behind billions of c
. . . Learn More
Date:
07/01/2022
Application of Power MOSFET in Battery Management Charge-Discharge System

Click image to enlarge

Figure 1. Battery protection board circuit diagram

­Power MOSFETs are required to be connected in series between the inside of the lithium-ion battery pack and the output load. At the same time, the dedicated IC is used to control the on and off of MOSFET for managing the charge and discharge of the battery, as shown in Figure 1. In consumer electronic systems, su
. . . Learn More
Date:
07/01/2022
Charged Up for Summer

Ally Winning, European Editor, PSD

­July is traditionally the holiday season in Europe, and hopefully you are on a beach or somewhere else just as relaxing. It has been a busy start to the year, and it looks like the end of the year will be even busier. If you are lying on the beach, it is likely that some of you will be listening to music on your
. . . Learn More
Date:
07/01/2022
The Ubiquity of Lithium-Ion Batteries

Jason Lomberg, North American Editor, PSD

­It’s beginning to look a lot like…normalcy. And for someone who gets cabin fever when I’m stuck inside for even a day, I couldn’t be happier. New COVID-19 cases continue to drop, from a U.S. 7-day average of nearly 700K as of 1/24 to 85K as of 6/21. Obviously, tens of thousands of instances of some
. . . Learn More
Date:
07/01/2022