14F-6, No. 79, Sec. 1, Xintai 5th Rd, Xizhi Dist., New Taipei City, 22101 Taiwan (R.O.C.)
Tel: 886-2-2698-3877
Fax: 886-2-2698-4089
email : [email protected]
MICROTEST 6632 Impedance Analyzer offers a wide frequency range of 10Hz to 50MHz for measuring the impedance characteristics of components and materials. The measured parameters include |Z| (impedance), |Y| (admittance), θ (phase angle), X (reactance), R (series/parallel resistance), G (conductance), B (Susceptance), L (inductance), D (dissipation factor), Q (quality factor), DCR (DC resistance), C (capacitance), ESR (equivalent series resistance), ε (relative permittivity), and μr (relative permeability). It supports both Meter mode and Sweep Analysis mode, allowing measurement results to be displayed in numeric or graphical formats. It supports LAN/USB Host/USB Device/GPIB/RS-232 communication interfaces, making it compatible with automation equipment or human-machine interfaces (PLC).
Selection
| 6632 Series | |||||||
| Model | 6632-1 | 6632-3 | 6632-5 | 6632-10 | 6632-20 | 6632-30 | 6632-50 |
| Frequency |
10Hz- 1MHz |
10Hz- 3MHz |
10Hz- 5MHz |
10Hz- 10MHz |
10Hz- 20MHz |
10Hz- 30MHz |
10Hz- 50MHz |
SPEC
| Model | 6632 | |
| Frequency Range | 10Hz-50MHz | |
| Frequency Setting | Continuity | |
| Frequency Resolution | 100mHz, 6-bit Frequency Input | |
| Frequency Output Accuracy | ±0.01% | |
| Basic Accuracy | ±0.08% (typical ±0.05%) | |
| AC Drive Level | Test Signal Voltage Level |
10mV - 2Vrms(100Ω) 10mV - 1Vrms(25Ω) |
| Voltage Minimum Resolution | 1mV | |
| Accuracy |
ALC ON：6％ * Voltage ±2mV ALC OFF：10％ * Voltage ±2mV |
|
| Test Signal Current Level | 200µA - 20mArms | |
| Current Minimum Resolution | 10µA | |
| Accuracy |
ALC ON：6％ * Current ± 20µA ALC OFF：10％ * Current ± 20µA |
|
| DC Drive Level | 1V (fixed) | |
| Output Impedance | 25Ω/100Ω (switchable) | |
| DC Bias Voltage |
Built-in ±12V (100Hz-50MHz) |
External Voltage Bias (±12V/±40V/±600V/±2000V) |
| DC Bias Current |
Option DC Bias Current Source (20A/60A/120A/320A) |
External Voltage Bias (100mA) |
| Measurement Mode | Meter mode, list mode, sweep mode, and optional equivalent circuit analysis function (S model) | |
| Measurement Parameters |
|Z|、|Y|、θ、X、R、G、B、L、D、Q、DCR、C、 ESR、εr 、μr |
|
| Test Time (Fastest) | < 3mS | |
Measurement Parameters
| Parameters | Range |
| |Z| | 0.000 mΩ to 9999.99 MΩ |
| R, X | ± 0.000 mΩ to 9999.99 MΩ |
| |Y| | 0.00000 μS to 999.999 kS |
| G, B | ± 0.00000 μS to 999.999 kS |
| θRAD | ± 0.00000 to 3.14159 |
| θDEG | ± 0.000° to 180.000° |
| Cs, Cp | ± 0.00000 pF to 9999.99 F |
| Ls, Lp | ± 0.00 nH to 9999.99 kH |
| D | 0.00000 to 9999.99 |
| Q | 0.00 to 9999.99 |
| Δ | ± 0.00% to 9999.99% |
| Rdc | 0.00 mΩ to 99.9999 MΩ |
| εr' εr'' | 0 to 100000 |
| μr' μr'' | 0 to 100000 |
System
| Measurement Circuit | Series/Parallel |
| Correction | Open Circuit/Short Circuit/Load correction |
| Cable Compensation | 0 / 0.5 / 1 /2 (m) |
| BIN | ABS、ΔABS、Δ%、OFF |
| Comparator | 9 |
| List Mode | 50 groups of Multi-steps setting (Each group contains up to 15 steps) |
| Bulit-in Storge | 100 sets LCR setting documents, 50 groups of list mode setting |
| USB Host Storge | LCR setting documents, list mode setting document, BMP graphics, Sweep screen and test result data |
| Trigger Test | Auto, manual, RS-232, GPIB, Handler |
| Power Supply | Voltage：90-264Vac |
| Frequency：47-63Hz | |
| Power consumption | 30VA |
| Environment | Temperature：10℃-40℃ |
| Humidity：20-90%RH | |
| Dimension | 336x147x340 mm (W*H*D) |
| Weight | 3.95 Kg |
| Interface | RS-232、Handler、LAN、USB Host、USB Device |
| Display | Color Screen, 7" TFT (800*480) |
The precision impedance analyzer 6632 has seven frequency options(10Hz to 1/3/5/10/20/30/50MHz).
Option 6632S
Evaluation impedance characteristics of RFID / NFC / automotive wireless of antennas
Option 6632S
Equivalent Circuit Analysis (Option)
It has seven different models, combine with different types of parameters ( R, L, C) help customers model the impedance versus frequency characteristics and self-resonant frequency (SRF).
The induction coil for wireless charging in a mobile phone. Due to the manufacturing process, the wiring density layout from the induction coil will affect the original capacitance. The size of the parallel equivalent capacitance in the coil is the key to determine whether the product can be successful in high frequency application. It can affect the receiving function/wireless charging of an antenna. With this element analysis, we can accurately determine the RLC value to ensure the quality of the induction coil.
Option 6632S
Model E is suitable for measuring and analyzing the resonators, piezoelectric element or transducer. The two-resonance frequency characteristic diagram presented above is suited for Model E.
List Mode
50 groups of list mode setting (Each group contains up to 15 steps).
Four Parameters Displayed Simultaneously
7.0”TFT, 800x480 color screen, and four parameters can displayed simultaneously.
Measure Inductor (DCR)
Inductor coil turns and winding materials will affect DCR value. The key parameters for inductor are Ls / Lp / Q / SRF / DCR.
Evaluation of DC bias voltage characteristics with semiconductor wafer or ceramic multilayer capacitors.
Magnetic Material Test Fixture (FX-0000C8)
Using the magnetic material test fixture for measuring of permeability of various toroidal cores or ferrite cores and electromagnetic shielding coating materials, 6632 built-in formula to directly calculate the permeability coefficient value μr
Dielectric Material Test Fixture (FX-0000C7)
Liquid Dielectric Material Test Fixture (FX-000C20)
Using the dielectric material test fixture for measuring PCB board or ceramic board. 6632 built-in formula to directly calculate the material dielectric value εr ', εr ".Using the liquid dielectric material test fixture for measuring the characteristics of electrochemical materials.
Testing PC board inductance coil.
Standard Accessories
| Power Cord | |
| DIP Test Fixture (FX-000C19) |  |
MLCC｜Option
|
For MLCC (Class 2) -Automatic Level Compensation Fixture
|
|
|
Automatic Level Compensation Fixture (FX-LR0001) |
 |
|
SMD Component Testing Fixture (FX-000C12) |
 |
Optional Accessories
| PC Link Software | |
| DIP Test Fixture (F423503) |  |
| DIP Test Fixture (F423504) |  |
| SMD Test Fixture (F423905) |  |
| Kelvin Clip Leads (F423906A) |  |
| Bottom Electrode SMD Test Fixture (FX-000C10) | |
| SMD Tweezer Test Leads (FX-000C11) |  |
| SMD Test Fixture (FX-000C12) |  |
| Dielectric Material Test Fixture (FX-0000C7) |
 |
| Liquid Dielectric Material Test Fixture (FX-000C20) |  |
| Magnetic Material Test Fixture (FX-0000C8) |
 |
|
Material Testing Fixture (FX-0000C9) |
 |
| External Voltage Bias (F420001) |  |
| External Voltage Bias (F420003) |  |
| External Voltage Bias (F420006) |  |
|
BNC Test Leads (F663001 A/B/C) |
 |
