As a bronchoscopic treatment for severe #COPD/#emphysema, the Zephyr Valves design accommodates a variety of airway sizes and shapes and is specially designed to adapt to the dynamic conditions of the airway. Learn more: https://bit.ly/4fc6RRH #ZephyrValvebyPulmonx #Pulmonology
Pulmonx Corporation’s Post
More Relevant Posts
-
𝗧𝗵𝗲𝗿𝗺𝗮𝗹 𝘀𝗲𝗽𝗮𝗿𝗮𝘁𝗶𝗼𝗻 – 𝗮 𝗯𝗲𝘁𝘁𝗲𝗿 𝗮𝗹𝘁𝗲𝗿𝗻𝗮𝘁𝗶𝘃𝗲 𝘁𝗼 𝘄𝗿𝗮𝗽𝗽𝗶𝗻𝗴 In comparison to the common “wrapped” practice (left image), thermal separation with #SchöckIsokorb® (right image) is a highly efficient solution to prevent thermal bridges at #parapet connections. Learn more about the insulation of parapets: https://lnkd.in/eGizCmng
To view or add a comment, sign in
-
-
JVI Vibratory Scalping Screens remove oversized material from processes, protecting downstream equipment. Scalping screens are used for coarse separation of oversized materials. Each screen is designed to maximize the probability that oversized particles do not pass through the screen deck. By removing oversized material from the process, scalping screens help prolong the operating lives of downstream equipment. Learn more about JVI Vibratory Scalping screens: https://buff.ly/3Nezj9b #JVI #bulkmaterial #bulkmaterialhandling #screening #vibratoryequipment
To view or add a comment, sign in
-
-
#snsinstitutions #snsdesignthinkers #designthinking Venturimeter Concept A venturimeter is a device used to measure the flow rate of a fluid in a pipe. It works on the principle that the velocity of a fluid increases as its pressure decreases. This relationship is described by Bernoulli's equation. Here's how it works: The venturimeter consists of a converging section (inlet), a throat (narrow section), and a diverging section (outlet). As the fluid flows through the converging section, its velocity increases due to the decrease in cross-sectional area At the throat, the fluid has its highest velocity and lowest pressure. In the diverging section, the velocity decreases and the pressure increases as the cross-sectional area increases. The difference in pressure between the inlet and throat is measured using pressure taps. This pressure difference is then used to calculate the flow rate of the fluid using the Bernoulli equation.
To view or add a comment, sign in
-
Tight access, high load requirements, and quick solutions are the perfect combination for helical anchors.
To view or add a comment, sign in
-
-
This Fiber optic gyroscope is specially designed for downhole survey tools, its unique technology allows the dimension only 32mm, meeting the strict requirements of downhole survey tools for size . Meanwhile its volume very small and light, with stable and reliable performance, which can adapt to various harsh environments. Features: ٭ Fast response,high precision and sensitivity ٭ Small volume and light weight ٭ Solid and reliable ٭ Unaffected by electromagnetic three-axis angular velocity
To view or add a comment, sign in
-
-
Satellite 480 G4 Model4 has a built-in water misting system, operated by the push of a button. There are many ways to achieve Polished Concrete, the assistance of applying water to the surface is one of them. The advantages of Wet Grinding include: No Dust is airborne thus reducing the need for respirators or dust extractors. The diamond segments or tools run cooler and don’t glaze over as easy. You can use the amount of water to govern the rate of wear on the diamonds. Continuously wetting the exposed surface prevents loss of moisture. Satellite 480 G4 Model 4 - Passive Planetary 1Phase | Floorex Products
To view or add a comment, sign in
-
"Student at Civil guruji", Completed Diploma in Civil Engineering at BKPI Sitamarhi."/TPR in BKPI College
Venturimeter??? • A Venturimeter is a device used to measure discharge of a flow of a fluid flowing through a pipe Components:- 1. A Converging cone 2.Throat 3.Diverging Cope Working of Venturimeter:- 1.Considered two sections first at the inlet and the second one is at the throat. The pressure head difference these two sections used to calculate the rate of flow through Venturimeter 2.As the water enters in the converging part(cone) it converges and reaches to the throat 3.The Throat has least c/s area ,as the water enters the velocity increases and pressure drops to minimum 4.Now there is pressure difference of the fluid at the two sections. At section 1, the pressure of the fluid is maximum and the velocity is minimum and vice versa 5.This pressure difference is measured by means of U-Tube manometer attached at both the section 6.This pressure difference is used to calculate the rate of flow of fluid flowing through a pipe. #postbyroshan #75dayschallenges #day10 #venturimeter #flowthorughpipes
To view or add a comment, sign in
-
-
Gyroscopic Stabilizer vs Fin Stabilizer: Which is Safer? Discover the pros and cons of gyroscopic stabilizers and fin stabilizers for your boat. Learn about the potential dangers and benefits of each system. #BoatStabilizers #GyroscopicStabilizer #FinStabilizer #BoatSafety #MarineTechnology #BoatingTips #BoatUpgrades #BoatAccessories #StabilityControl #MarineEngineering
To view or add a comment, sign in
-
PMG (Permanent Magnet Generator) 16 pole permanent magnet used as Rotor. Armature winding on the Stator Side.
To view or add a comment, sign in
-
-
Kustos Ultra BT A, the range of pistons for swing gates with a weight of up to 500 kg. The Kustos Ultra BT A range of irreversible operators is suitable for swing gates weighing up to 500 kg and 4 m long. The magnetic limit switch ensures maximum precision of movement with quick and easy adjustment. Coupled with integrated adjustable mechanical stops , they allow precise installation without requiring floor stops. In addition, the covered worm screw ensures maximum protection against external agents (water, dust, dirt, etc.) and total protection for people, preventing any type of access to the moving parts. Discover the advantages https://lnkd.in/eQDiAezx
To view or add a comment, sign in
-