Panalane® L-14E is a low viscosity Hydrogenated Polyisobutene designed to improve wear resistance while delivering a soft, rich feel, making it an ideal choice for various cosmetic formulations. Learn more here https://lnkd.in/dUBfsWgD or email [email protected] to request a sample. #letsmakebeautytogether #HydrogenatedPolyisobutene #INEOShyrdocarbons #Panalane #shopcosmeticingredients
Presperse Corporation’s Post
More Relevant Posts
-
Cyclopentasiloxane (and) Dimethicone/Vinyldimethicone Crosspolymer [INCI/CTFA] This product is a blend of high molecular weight silicone elastomer and cyclic siloxane. It is a translucent silicone elastomer gel. The nature of its gel determines that this product cannot really dissolve in anything. In the oil phase, it can only exist in a stably dispersed form; as a thickener, this product can be used in various cosmetic formulas such as water/oil emulsion, water/silicone oil emulsion, oil/water emulsion and anhydrous products to reduce the formulation system tackiness for a dry, non-greasy skin feel.
To view or add a comment, sign in
-
#Cosmetics chemists -- check out the benefits of using RESIFA™ SOLESPHERE™ microspherical silica in your sunscreen formulations!
RESIFA™ SOLESPHERE™ microspherical silica grades provide sensory performance improvement and protection efficiency for sunscreen products – and they function well as ingredients of O/W, W/O and anhydrous emulsion formulations. 🌞🧴 Find product, application and formulation information here: https://ow.ly/8jqC50SaX3n #Sunscreen #Cosmetics #Chemistry #PersonalCareProducts #SkinCare
To view or add a comment, sign in
-
🔔 Quick Update On 4 April 2024, the Scientific Committee on Consumer Safety (SCCS) has published its Final Opinion on Benzophenone-4. «On the basis of the safety assessment, and considering the concerns related to potential endocrine disrupting properties, the SCCS is of the opinion that benzophenone-4 is safe when used as UV filter up to a maximum concentration of 5% in sunscreen, face and hand cream, all leave-on and rinse-off products (total dermal aggregate), lipstick, sunscreen propellant spray and pump spray, when used separately or in combination (based on deterministic aggregated exposure).» Moreover, «any additional use of benzophenone-4, such as protectant for stabilising cosmetic formulations when exposed to light, should remain within the concentration mentioned above (i.e. 5%), including the use as UV-filter.» For more information, see the complete SCCS Opinion on Benzophenone-4 at: https://lnkd.in/dCZxKb_7 Find out more about this ingredient in our new article: https://lnkd.in/duqXhcrp #cosmeticsregulation #cosmesticsafety #cosmeticsindustry
To view or add a comment, sign in
-
Acrylate copolymers: widely used in cosmetics and personal care products due to their ability to enhance texture and stability, improve the viscosity, ensuring a smooth, consistent application and are valued for their compatibility with various formulations, contributing to the effectiveness and appeal of creams, lotions, and gels. #PharmaceuticalInnovation #ScienceForGood #FutureOfHealth #Innovation #ChemicalEngineering #SustainableChemistry #GreenInnovations #Networking #IndustryEvents #PharmaTrends #ThoughtLeadership
To view or add a comment, sign in
-
Future of cosmetic preservatives in the global cosmetic chemical market looks promising with opportunities in the lotion, facemask, sunscreen and scrub, shampoo and conditioner, soap, shower cleanser and shaving gel, face powder and powder compact, and mouthwash and toothpaste application segments. Major growth drivers include increase in the purchasing power of the population, growing awareness towards personal hygiene, and rising preference for premium and organic personal care products. Key players such as Ashland Group, BASF, and Arkema are implementing influential marketing approaches. The cosmetic preservatives in the global cosmetic chemical market is expected to reach an estimated $0.21 billion by 2028 with a CAGR of 7.5% from 2023 to 2028. Read more: https://lnkd.in/gBHP7pay. For any questions, feel free to reach out at [email protected]. #cosmeticpreservativesintheglobalcosmeticchemicalmarket #marketresearch #lucintel
To view or add a comment, sign in
-
We are delighted to announce the launch of the Low Salt Betaine Shower Gel Formulation Guide, a landmark achievement brought to you by the collaborative efforts of Libra Speciality Chemicals Limited and our sister company, Expac (Preston) Ltd. This guide is designed for cosmetic chemists and formulators committed to developing advanced skincare solutions. Our new Sulphate-Free formulation utilises Cocamidopropyl Betaine with reduced salt content as the primary surfactant, enhancing skin compatibility and stability without compromising the product’s effectiveness. Low Salt Cocamidopropyl Betaines can be combined with Sodium Lauroyl Sarcosinate to produce a dense creamy foam. Where standard salt Betaine is used, formulations can be hazy, low viscosity, and unstable. PEG or carbomer-based viscosity modifiers are also no longer necessary in this type of surfactant system to achieve stability, clarity, and viscosity. This guide serves as an informative resource for pushing the boundaries of cosmetic science, focusing on environmentally friendly and effective solutions. #LowSaltShowerGel #LowSaltBetaine #CosmeticChemistry #InnovativeFormulations #LibraSpecialityChemicals #Expac #SkinFriendlyProducts #PersonalCareInnovation #EcoFriendlyCosmetics #FormulationGuideRelease
To view or add a comment, sign in
-
👉 The purpose of an #opacifier is to improve the appearance of a formulation by making it #opaque. 💁♀️ Our OPG series: ✅ Have a high opacifying capacity ✅ Impart uniform opacity to transparent or colored #formulations in anionic and non-ionic systems ✅ Especially recommended for liquid formulations with #surfactants ✅ Have very easy application: can be dosed directly without pre-dilution at any point in the formulation process ✅ Are applicable in personal and home care formulations as well as in textile detergency formulations ✅ Have excellent compatibility and stability 👩🔬 Compatibility tests can be carried out in our laboratories, so contact [email protected] and discover how to improve your formulations. #Bath #shower #shampoos #liquidsoaps #hairconditioners #skinlotions #facialcleansing #creams #sunscreen #champús #gel #detergency #detergencia #jabon #opacificante #personalcare #homecare
To view or add a comment, sign in
-
How to use raw material hydroxyethyl urea 2078-71-9? Hydroxyethyl urea (CAS number 2078-71-9) is a chemical compound used as a moisturizing agent in various personal care products, such as skincare and hair care products. It helps to retain moisture and improve the skin's hydration. To use hydroxyethyl urea as a raw material, here are some general guidelines: 1. Formulation: Determine the desired concentration or percentage of hydroxyethyl urea in your formulation. This may vary depending on the specific product and its intended use. 2. Safety Considerations: Ensure that you handle hydroxyethyl urea safely, following good laboratory or manufacturing practices and any applicable safety guidelines or regulations. It is advised to use personal protective equipment (PPE) such as gloves and goggles. 3. Mixing: Hydroxyethyl urea can be added to the water phase of your formulation. Typically, it is soluble in water and relatively easy to incorporate into personal care products. Use a suitable mixing apparatus, such as a magnetic stirrer or mixer, to ensure proper dispersion. 4. Incorporation: Depending on the product, hydroxyethyl urea can be added during the manufacturing process. For example, in a lotion or cream formulation, it is generally added during the emulsion preparation stage. 5. Compatibility: Consider the compatibility of hydroxyethyl urea with other ingredients in your formulation. Some ingredients may affect its solubility or stability, so it's essential to conduct compatibility tests or consult technical data sheets and resources. 6. Quality Control: Perform appropriate quality control measures to ensure the final product meets desired specifications. This may involve testing for viscosity, pH, stability, and other relevant parameters. Remember, it's always essential to follow industry best practices, guidelines, and local regulations when working with chemicals. If you're new to formulating or working with raw materials, it's advisable to consult with experienced professionals or chemists. 🧪💧🧴 #onerchem #hydroxyethylurea #skincare #skincareproducts #chemicalsupplier #rawmaterials
To view or add a comment, sign in
-
Associate professor, Consultant in #Dermatology, #Venereology and #Cosmetics, The Medical city, Qassim University
The current maximum, safe concentration of Kojic acid in cosmetic products is 1%
To view or add a comment, sign in
-
# Plastic & Glass bottle with Metal Closure Seal breakthrough Due to the high conductivity of aluminum caps/tinplate caps, it is difficult for heat induction seal liner to directly seal plastic or glass bottles; generally, an intermediate plastic cap is used to seal the bottles first and then the metal cap is screwed on, or a metal cap + pressure-sensitive is used directly sealed bottles; Now take a look at our metal cap with heat induction seal liner, which can directly seal ours glass bottles or plastic bottles, saving filling efficiency and cost; the sealing effect is better Great for CBD capsules, gummies, cosmetics and supplements
To view or add a comment, sign in
3,177 followers