Experience the performance of the Fecon High Flow Bull Hog® ➡ Variable speed motor automatically adjusts to maximize rotor speed & torque to changing material loads. ➡ For lighter material loads, higher RPM means more bites per second and finer material sizing. With heavier material, the Bull Hog delivers more rotor torque keeping the rotor turning when other heads may stall. ➡ Field tested and proven to be the most productive heads available. Learn More: https://lnkd.in/dSNJ5MED
FECON’s Post
More Relevant Posts
-
Easily measure shaft rotation and speed https://buff.ly/4eWVWeM
To view or add a comment, sign in
-
Manual winding mechanical movement, offering a power reserve of up to 46 hours when fully wound. The fumé dial with a sunray finish features a recessed sub-dial for small seconds and a traditional railway-track-style chapter ring.
To view or add a comment, sign in
-
-
Upgrade your fire pit experience with HPC’s stainless steel Torpedo Nozzle Burner! 🔥 Our Torpedo Burner mixes air underneath the fire pit, unlike competitive brass burners that do so through their nozzle ventures on top - which creates a noisy experience. This design not only enhances the look with impressive flames but also mitigates water issues thanks to our advanced water mitigation technology. Choose from HPC’s four ignition technologies: Match Lit, FPP (battery-operated electronic ignition), and Smart Electronic Ignition. Don’t settle for less—choose the best with HPC Fire Inspired Torpedo Burner. #HPCFireInspired #TorpedoBurner #FirePitUpgrade #OutdoorLiving #UltimateFirePit
To view or add a comment, sign in
-
Tank tracks configuration. For linear movement within the 3 wheel spectrum.
To view or add a comment, sign in
-
Hi Applied Flow Technology (AFT) Thanks for the information also I have 2 questions on slurry pump hydraulics 1. How to decide the derating factor for slurry pumps? (Which we see while giving us inputs for the pump) and What is its impact on design? I have started runes by giving 5-30% and compared the design data of the pump in the output window. But I see no difference in the punp head. There is an API guideline number given but I am not able to find much details. 2. There are 2 models for slurry pump hydraulics on the page where we give inputs for solid properties. Which one needs to use when? (Newtonian model vs Setting slurry model) I have compared many different pumps by using both models and keeping all other data constant. I found a 30-40% difference in my head. It seems that the wrong selection between these two without knowing in detail will end up with either over or under sizing of slurry pumps. I found some basic answers but could you please elaborate with proper dealing! #aft
Good News for engineers who use the Settling Slurry Module. AFT Fathom 13 and AFT Impulse 10 now contain a new 4-Component Slurry Model. The model was developed by industry-leading experts and is respected for its accuracy in part because the individual components are based on well-established sub-models. Read more about this new feature: https://ow.ly/M4b450Q0csK
To view or add a comment, sign in
-
-
BETTER TRACTION EQUALS BETTER PRODUCTIVITY. Featuring a 16-hp (11.9-kW) Briggs and Stratton® and up to 36” (914.4 mm) digging depth for efficient installation of pipe and cable, the C16X is all about reliability and productivity. https://ow.ly/9rtg50SzZmv
To view or add a comment, sign in
-
-
Bidirectional pumps and propellers are designed to operate efficiently in both forward and reverse directions.Bidirectional Pumps:These pumps can move fluid in either direction, providing flexibility in various applications.Typically, they have symmetrical impeller blades and a reversible motor, allowing fluid to be pumped both forward and backward.Bidirectional Propellers:These are commonly used in marine applications, such as ships and boats.The blades of bidirectional propellers are designed to generate thrust in both forward and reverse directions.The pitch of the blades can be adjusted to optimize performance for different operational requirements.Both bidirectional pumps and propellers play crucial roles in applications where the ability to operate in both directions is essential, providing maneuverability and control. #mechanicaldesign #pumpsystems
To view or add a comment, sign in
-
Foreign trade at Cheegers Machinery,producing rotary valve and diverter valve for chemicals, cement & minerals, energy & dust removing industries, etc.
Drop-through rotary airlock valve consists of positive pressure airlock valve and material and air mixed feeding pipe, mainly used for highly corrosive and granular type materials. It avoids the attack and corrosion from material through high mixture efficiency of feeding pipe. The aerodynamic design inside the feeding pipe improves the conveying efficiency and working life. By connecting feeding pipe in series, materials from different hoppers can be conveyed through a same line.
To view or add a comment, sign in
-
-
When choosing between the Rotary Actuator (Heli-Tilt) and the Hydraulic Cylinder (Ram-Tilt), how crucial is the tilt range for your projects? Does a broader tilt range provide the flexibility you need, or do other factors play a bigger role in your decision? Explore these key differences and see which tilt range aligns with your needs! 𝐇𝐲𝐝𝐫𝐚𝐮𝐥𝐢𝐜 𝐂𝐲𝐥𝐢𝐧𝐝𝐞𝐫 (𝐑𝐚𝐦-𝐓𝐢𝐥𝐭): • Limited to 90 degrees total (45 degrees each way). 𝐑𝐨𝐭𝐚𝐫𝐲 𝐀𝐜𝐭𝐮𝐚𝐭𝐨𝐫 (𝐇𝐞𝐥𝐢-𝐓𝐢𝐥𝐭): • Provides up to 180 degrees of tilt range. (180 degrees on machines from 1-9.9 Tonnes, 12 degrees for machines from 10-14.9 tonnes and 134 degrees of tilt for machines from 15 - 36 tonnes) Click here https://lnkd.in/gUdzSkru to learn more about their differences.
To view or add a comment, sign in
-
-
Dynamic Mesh of Rotating Single Gear in Fluid Domain. Domain Size = 300 X 300 [MM] Gear : M4.5 Z24
To view or add a comment, sign in