Do you need to buy refrigerant? A-Gas offers an extensive line of fluorinated as well as un-fluorinated refrigerants in disposables or in refillable cylinders. Learn more: https://loom.ly/tvPY08I
A-Gas in the Americas’ Post
More Relevant Posts
-
A-Gas can help with your your #refrigerant needs. Read more below about our extensive #reclaimedrefrigerant line.
Do you need to buy refrigerant? A-Gas offers an extensive line of fluorinated as well as un-fluorinated refrigerants in disposables or in refillable cylinders. Learn more: https://loom.ly/tvPY08I
To view or add a comment, sign in
-
-
Freeze-drying, gas liquefaction, or solvent recovery? Do these technologies belong to your production processes? And how can you ensure flawless operation? MIRAI INTEX can help with this. We provide effective solutions for ultra-low-temperature refrigeration, for example, by installing MIRAI Cold 10 T. It operates in a closed-cycle using the power of the most natural refrigerant, air. This solution allows you to reach and maintain ultra-low temperatures down to -110°C. Equipped with a heat exchanger that works with heat transfer fluids, such as silicone oil. MIRAI Cold 10 T represents the ideal plug-and-play refrigeration solution for both new systems and retrofits. Continue to the MIRAI application configurator to find the best solution according to your needs. https://lnkd.in/gDu-kcaU #mirai #futureproofrefrigeration #ultralowtemeperatures #closedcycle
To view or add a comment, sign in
-
-
Another common aftermarket consumable we see is the nozzle. Another important part of consumable sets, it’s responsible for many functions, including controlling the path of the coolant and plasma gas. It’s critical to have proper cooling of the nozzle to maintain both its own lifecycle, as well as the torch head lifecycle. This aftermarket nozzle has no alignment keying and no coolant control pathway, which will lead to early failure and damage your torch. #WeKnowHow #TechnologyTuesday #PlasmaCutting #KjellbergCutting #PlasmaCuttingConsumables
To view or add a comment, sign in
-
-
This guidebook is prepared based on the experience of using NON F-GAS refrigerants by conversion to AC units.
To view or add a comment, sign in
-
-
Combined Screw Air Compressor A combined screw air compressor integrates components such as screw compressors, refrigerated dryers, precision filters, and air receivers into a single unit. Hence, it is also known as an integrated air compressor. It offers convenient installation, easy application, and portability. In the current scenario, compressed air has become the second-largest secure energy source after electricity, and it finds widespread applications across various industries. https://lnkd.in/geAH7qzf
To view or add a comment, sign in
-
-
Once upon a time chillers and heat pumps were mostly measured on full load efficiency. Once upon a time chillers and heat pumps were mostly based on a couple of refrigerants with some exceptions linked to the specific applications. Once upon a time the components manufacturers were periodically chasing the OEMs Manufacturers for moving to new fully proofed and developed components providing higher efficiency or better envelope or better costs. Today the units need to comply with progressively more challenging seasonal efficiencies either to enter into the market or to access to local incentive programs (in Italy we are still stuck with a legacy incentive program looking only at full load, but that’s another story…) Today you can chose the refrigerant from the refrigerant list… Today as OEMs we co-develop in parallel with the components manufacturers considering some of the upcoming legislative revolutions. This is the result of the joined efforts between a greatly dynamic industry sector and an ambitious legislative framework. In Swegon I can say that we started developing similar products always quite before the bindings legislative thresholds, being this part of our DNA and our strategy, and being this in line with our customers’ expectations. Anyhow the big market shift (the one moving the largest part of the end users) generally needs to have also a push from the regulators. That’s why I think we need from the European Commission the same level of ambition shown with the F-Gas revision, the past LOT 21 revisions in the upcoming definition of the Fossil Fuel Boilers (to complete the just published EPBD revision) and the future LOT 1 revision! So we will be able to finally complete also this story: once upon a time we were inefficiently burning to heat up ourselves and today… #EPBD #CleanHeating #HeatPump #Lot1 #FossilFuelBoiler
To view or add a comment, sign in
-
-
Screw compression at CO2 Liquefaction Facility: Slide Valves VS. VFDs | 𝗪𝗵𝗶𝗰𝗵 𝗼𝘂𝘁𝗽𝗲𝗿𝗳𝗼𝗿𝗺𝘀? We took a 1000 metric ton per day (MTPD) CO2 liquefaction facility that used screw compression as the main driver for product and for refrigeration. We compared both performance and energy consumption of the screw compressors using slide valves and VFDs. VFDs offered significant benefits in terms of: ▶ efficiency, ▶ reducing operating costs, and ▶ providing a lower carbon intensity for the ethanol product. Using VFDs to control the capacity of the screw compressors resulted in …. an 18% reduction in power consumption, compared to using slide valves! This translates to an 𝟭𝟴% 𝗿𝗲𝗱𝘂𝗰𝘁𝗶𝗼𝗻 𝗶𝗻 𝗼𝗽𝗲𝗿𝗮𝘁𝗶𝗻𝗴 𝗰𝗼𝘀𝘁, which amounts to $3,248 USD per day in savings from lower power demands. ------ Read the entire analysis on the blog (link in comments). What is your experience with slide valves and VFDs? Have you seen similar results? 👀
To view or add a comment, sign in
-
Experience the unparalleled efficiency and power of Refcomp Screw Compressors. Engineered for excellence, our compressors are the ideal choice for commercial and industrial refrigeration applications. Upgrade your cooling systems with Refcomp for reliable performance and superior durability. #Refcomp #ScrewCompressors #Refrigeration #CoolingSolutions #IndustrialEfficiency #CommercialCooling #RefrigerationPower #ReliablePerformance #RefcompScrewCompressors #Compressor #coldchain #coldchainsolutions #coldstorage
To view or add a comment, sign in
-