From the course: Revit 2024: Essential Training for Architecture
Unlock the full course today
Join today to access over 23,400 courses taught by industry experts.
Wall joins - Revit Tutorial
From the course: Revit 2024: Essential Training for Architecture
Wall joins
- [Instructor] When two walls touch one another they usually join automatically. And typically the joint condition that we get automatically is suitable in most cases. However, it's not always the case and there are some times when we get an unacceptable wall joint and we want to adjust it. In cases like that we have the Wall Joins tool that we can use to help us adjust the default behavior. So to demonstrate the Wall Joins tool, I'm going to zoom in over here on the right hand side of the plan, and I've got a few conditions where we can talk about this. So we're going to start with these walls here that enter into the suite. So these are masonry walls here and here and they're butting into these stud walls here. And currently it's not displaying correctly, I would want the masonry wall to continue through and interrupt the stud wall. So we're going to use the Wall Joins tool to help us do that. Now the interface of this tool…
Practice while you learn with exercise files
Download the files the instructor uses to teach the course. Follow along and learn by watching, listening and practicing.
Contents
-
-
-
-
-
-
Adding walls11m 35s
-
(Locked)
Wall properties and types10m 51s
-
(Locked)
Using snaps7m 49s
-
(Locked)
Locating walls9m 57s
-
(Locked)
Using the Modify tools10m 12s
-
(Locked)
Adding doors and windows10m 24s
-
(Locked)
Adding plumbing fixtures and other components12m 44s
-
(Locked)
Wall joins5m 23s
-
(Locked)
Using constraints12m 6s
-
-
-
-
-
-
-
-
-
-
-
-
-