PHILLIPS PANCAKE HEAD IN 410 STAINLESS has a low profile head with a self-drilling cutting point to pierce through 20 to 14 gauge metals. This flat top head screw is suitable for metal roofing applications. Check out our website at www.fordfasteners.com or call us at 1-800-272-3673 for sizes and inventory at our competitive pricing today.
Ford Fasteners, Inc.
Industrial Machinery Manufacturing
Fairfield, NJ 334 followers
Supplier of 410 Stainless Steel Screws
About us
Ford Fasteners Inc. was founded in 1963 by George Cellary. He began manufacturing screws for the window and door industry. Ford Fasteners has since evolved into the 300 series stainless steel screw and long life coated fastener market. Our stainless products are used in the roofing, solar, and construction industries. Our main products are self drilling, tapping (type A & B), self piercing, and thread cutting (type F, 23, and 25) screws. Ford assembles EPDM bonded sealing washers onto screws. We now offer Ford 1000 hour coating, which also known as epoxy coating, on screws for enhanced performance. Ford Fasteners, Inc. has been manufacturing and selling quality fasteners for 46 years. Our commitment to quality and service is our #1 priority and we take pride knowing that Ford Fasteners parts are regarded as some of the best in the industry. Our investment in inventory, personnel and new machinery assures this commitment to provide quality products with the same day shipments at competitive prices. Ford Fasteners has a vast quantity of screws for immediate delivery. Blanket orders will be accepted. Call today for further information. We assemble EPDM bonded washers to self drilling screws. Ford can custom paint screws.
- Website
-
http://www.fordfasteners.com
External link for Ford Fasteners, Inc.
- Industry
- Industrial Machinery Manufacturing
- Company size
- 51-200 employees
- Headquarters
- Fairfield, NJ
- Type
- Privately Held
- Founded
- 1963
- Specialties
- Self-Drilling Screws, Self Tapping Screws, Industrial Screws, Cutting Screws, Self Sealing Screws, and Sheet Metal Fasteners
Locations
-
Primary
Get directions
4 Edison Place
Unit D
Fairfield, NJ 07004, US
Employees at Ford Fasteners, Inc.
Updates
-
Introducing our 410 square drive pan head self drilling screws. The square drive can provide the extra torque needed for a tight and secure fit. Give us a call at 800-272-3673 or visit our website at www.fordfasteners.com to learn more.
-
-
MODIFIED TRUSS HEAD also known as a K-Lath screw is identified for its low profile truss, extra wide and slightly rounded head and has a large bearing surface. This is a great screw to use on thin applications like sheet metal. We stock #8 and #10 screws with lengths starting at ½” going up to 1 ½” long and also offer EPDM bonded sealing washer assembly if needed. Give us a call at 800-272-3673 or check out our website at www.fordfasteners.com to learn more.
-
-
Our best selling screw, the 410 Stainless Steel Self Drilling Hex Head comes with or without our EPDM Bonded Sealing washers. The rubber bottom on the washer helps secure a tight fit for those tough applications such as metal roof installations and also helps with moisture protection. Washers come in many sizes and assembled in house. Give us a call at 800-272-3673 or visit our website at www.fordfasteners.com to learn more or to place an order.
-
-
Visit our website at www.fordfasteners.com or give us a call at 1-800-272-3673 to learn more!
-
-
Our hex head 410 stainless self-piercing screw comes with an extra sharp tip and designed to penetrate its own hole giving you the ability to fasten in one step. This screw can also be assembled with our EPDM stainless steel washers with a rubber bottom in house. Give us a call at 800-272-3673 or visit our website at www.fordfasteners.com for our stock sizes.
-
-
Our 410 self drilling flat head screw is uniquely designed to have a counter sunk head to give a flush and clean look on any surface. Call Ford for 410 or check out our website at www.fordfasteners.com to learn more about our sizes and availability at competitive prices.
-
-
Our EPDM bonded sealing washers consist of EPDM rubber that is permanently bonded onto a thin stainless steel washer. The rubber helps with moisture protection. Assembly of the washer is done in house onto our screws. We stock extra wide OD EPDM Bonded Sealing Washers in stainless going up to 1 1/8”. These washers work great for metal roofing projects. The extra wide rubber washers with stainless backing helps secure metal panels in place in high wind conditions. Check us out to learn more at www.fordfasteners.com or call 800-272-3673.
-
-
PHILLIPS PANCAKE HEAD IN 410 STAINLESS has a low profile head with a self-drilling cutting point to pierce through 20 to 14 gauge metals. This flat top head screw is suitable for metal roofing applications. Check out our website at www.fordfasteners.com or call us at 1-800-272-3673 for sizes and inventory at our competitive pricing today.
-