retaining wall

architecture
verifiedCite
While every effort has been made to follow citation style rules, there may be some discrepancies. Please refer to the appropriate style manual or other sources if you have any questions.
Select Citation Style
Feedback
Corrections? Updates? Omissions? Let us know if you have suggestions to improve this article (requires login).
Thank you for your feedback

Our editors will review what you’ve submitted and determine whether to revise the article.

Print
verifiedCite
While every effort has been made to follow citation style rules, there may be some discrepancies. Please refer to the appropriate style manual or other sources if you have any questions.
Select Citation Style
Feedback
Corrections? Updates? Omissions? Let us know if you have suggestions to improve this article (requires login).
Thank you for your feedback

Our editors will review what you’ve submitted and determine whether to revise the article.

Also known as: breast wall, revetment
Also called:
revetment or breast wall

retaining wall, freestanding wall that either resists some weight on one side or prevents the erosion of an embankment. It may also be “battered”—that is, inclined toward the load it is bearing.

There are a number of methods employed to resist the lateral force against such a wall. The most basic type of reinforced retaining wall is the gravity wall, which is of massive concrete that is prevented from falling over by simple gravity. The cantilever retaining wall has cantilever footings, which have tie beams balancing the asymmetrical load. A counterfort retaining wall is a cantilever wall with counterforts, or buttresses, attached to the inside face of the wall to further resist lateral thrust. Some common materials used for retaining walls are treated lumber, concrete block systems, poured concrete, stone, and brick.

This article was most recently revised and updated by Kathleen Kuiper.