Title:Peak Reduction and Clipping Mitigation by Compressive Sensing

Abstract:This work establishes the design, analysis, and fine-tuning of a Peak-to-Average-Power-Ratio (PAPR) reducing system, based on compressed sensing at the receiver of a peak-reducing sparse clipper applied to an OFDM signal at the transmitter. By exploiting the sparsity of the OFDM signal in the time domain relative to a pre-defined clipping threshold, the method depends on partially observing the frequency content of extremely simple sparse clippers to recover the locations, magnitudes, and phases of the clipped coefficients of the peak-reduced signal. We claim that in the absence of optimization algorithms at the transmitter that confine the frequency support of clippers to a predefined set of reserved-tones, no other tone-reservation method can reliably recover the original OFDM signal with such low complexity.
Afterwards we focus on designing different clipping signals that can embed a priori information regarding the support and phase of the peak-reducing signal to the receiver, followed by modified compressive sensing techniques for enhanced recovery. This includes data-based weighted {\ell} 1 minimization for enhanced support recovery and phase-augmention for homogeneous clippers followed by Bayesian techniques.
We show that using such techniques for a typical OFDM signal of 256 subcarriers and 20% reserved tones, the PAPR can be reduced by approximately 4.5 dB with a significant increase in capacity compared to a system which uses all its tones for data transmission and clips to such levels. The design is hence appealing from both capacity and PAPR reduction aspects.