Features
- Operating input voltage range 9V to 14V
- Output current up to -1A
- Reference voltage: 0.8V
- Efficiency up to 90% at -1A Loading
- Current mode with PSM for Fast Response and higher Efficiency
- Fixed 500kHz switching Frequency
- Protections:
- Under Voltage Protection and Hiccup mode
- Current Limited
- Over Temperature Protection
- BST to SW POR function
- Internal Soft-Start
General Description
APW7393 is an inverting Buck-Boost converter. Integrated 70mΩ high side and 60mΩ low side power MOSFET. Can generating a negative output voltage and provides an output current up to -1A. The APW7393 is equipped with an automatic PSM/PWM mode operation when MODE pin connecting to VOUT pin. At light load, the IC operates in the PSM mode to reduce the switching losses. At heavy load, APW7393 works in PWM mode with a fixed switching frequency of 500kHz. If MODE pin connecting to VIN pin, converter working in force PWM mode. Built-in EN function reference voltage, can simplify enable function in inverting converter application. Give a voltage more than 2V on EN to GND pin, IC VOUT will turn on with soft-start function. The APW7393 is also equipped with Power-on-reset, soft start, enable/disable and whole protections (over-voltage, hiccup mode, over-temperature and current-limit) into a single package.
Features
- Single 12V Power Supply Required
- Excellent Output Voltage Regulation
- Simple Single Loop Control Design
- Programmable Frequency Range from 50kHz ~ 350kHz
- CCM/DCM Operation Selectable by EN Pin
- Discontinuous Conduction Mode in Light Load to Increase Efficiency (VEN=2V)
- Output Current Monitor (IMON pin)
- Integrated Soft-Start and Soft-Off
- Support Pre-Biased Power-On
- Output Power Line Compensation
- Phase Shift 180o
- Integrated Boot-Strap Diode
- Over-Current and Short-Circuit Protection
- Sence External RSENSE (option 2)
- 120% Over-Voltage Protection
- 50% Under-Voltage Protection
- Over-Temperature Protection
- Available in SSOP-24 and SSOP-24P Packages
General Description
The APW7391 is a dual channel voltage mode, synchronous PWM controller which drives dual N-channel MOSFETs. The device integrates monitoring and protection functions into a single package, provides two controlled power output with under-voltage and overcurrent protections. The APW7391 provides excellent regulation for output load variation. The internal 1.0V temperature-compensated reference voltage provides high accuracy of 0.8% over line and load regulation. The PWM switching frequency is adjustable from 50KHz to 350KHz. The APW7391 has been equipped with excellent protection functions: POR, IMON, OCP, SCP, UVP, OVP OTP. The Power-On-Reset (POR) circuit can monitor the VCC input voltage to make sure the supply voltage is valid. The APW7391 adopts either the external power inductor’s DCR or an external accurate sense resistor to sense the output current. The output current information is reported at IMON pin whose output voltage is proportional to output current. During the PWM switching, the APW7391 has OCP and SCP protections. When the load current exceeds the OCP or SCP threshold, the APW7391 shuts off its PWM switcher to prevent catastrophic failure caused by abnormal load or short-circuit. The APW7391 senses its FB pin for output UVP and OVP protection, which is 50% and 120% of reference voltage respectively. When the UVP or OVP occurs, the APW7391 latches off the PWM switcher. APW7391 has over temperature protection. When the die temperature is above 150°C, the APW7391 ceases PWM operation and recover normal operation when the die temperature drops by 40°C. The APW7391 is available in SSOP-24 and SSOP-24P packages, which is compliant with RoHS.
Features
- Wide range input is 4.5V to 24V
- High Accurate LED Current 2% Typ. (ILED=20mA)
- LED current modulation method: PWM and DC mode
- 96 Channel flexible PWM generators and independent for 14 Bits PWM Brightness
- Synchronization with TV Frame – VSYNC / HSYNC / Digital PLL Integrated
- Digital Configurable DC/DC Feedback
- Protection For Safety Features
- LED Open Detection
- Temperature Shutdown detection
- UVLO
- PWM and DC Dimming Via SPI Interface
- HDR mode for LED current modulation
- Available In QFN12x12-120 Package
- One global high accurate 10 big DAC which sets the LED current
General Description
The APE5035 are integrates Mosfet and 96 channel LED controller for LCD backlight. It’s high accurate LED current 2% (20mA LED current) and wide input voltage range. The APE5035 has 96 Channel flexible PWM generators and independent 14 bits PWM brightness were control LED current for every channel. In addition; It's has one global high accurate 10 bit DAC which sets the LED current. It’s synchronization with TV Frame including VSYNC/HSYNC and Digital PLL method. The APE5035 own LED current modulation method including PWM mode and DC mode. When applications have flicker frequency issue and then can using the DC mode method eliminate flicker frequency problem. The APE5035 has two pins can be digital configurable DC/DC feedback, that’s for control DC/DC architecture. As the same time; the device using programmable via SPI interface. The APE5035 owns HDR mode for modulation LED current. It’s build-in protection for safety; include LED short, LED Open, temperature shutdown protection and UVLO. The APE5035 is available in QFN12x12-120 packages.
Features
- Wide range input is 4.5V to 26V
- High Accurate LED Current 2% Typ. (ILED=60mA)
- LED current modulation method: PWM and DC mode
- 40 Channel flexible PWM generators and independent for 13 Bits PWM Brightness
- Synchronization with TV Frame – VSYNC / Digital PLL Integrated
- Digital Configurable DC / DC Feedback
- Protection For Safety Features
- LED Open Detection
- Temperature Shutdown detection
- UVLO
- PWM and DC Dimming Via SPI Interface (16 bit protocol)
- HDR mode for LED current modulation
- Available In QFN 9x9-76 Package
- One global / local high accurate 10 big DAC which sets the LED current
General Description
The APE5039 are integrates Mosfet and 40 channel LED controller for LED backlight. It’s high accurate LED current 2% (60mA LED current) and wide input voltage range. The APE5039 has 40 Channel flexible PWM generators and independent 13 bits PWM brightness were control LED current for every channel. In addition; It's has one global/local high accurate 10 bit DAC which sets the LED current. It’s synchronization with TV Frame including VSYNC and Digital PLL method. The APE5039 own LED current modulation method including PWM mode and DC mode. When applications have flicker frequency issue and then can using the DC mode method eliminate flicker frequency problem. The APE5039 has two pins can be digital configurable DC/ DC feedback, that’s for control DC/DC architecture. As the same time; the device using programmable via SPI interface. The APE5039 owns HDR mode for modulation LED current. It’s build-in protection for safety; include LED short, LED Open, temperature shutdown protection and UVLO. The APE5039 is available in QFN 9x9-76 packages.
Features
- Wide input voltage range:
- Channel 2 from 3V to 18V
- 3A/2.5A/1.5A Output Current on Channel1/2/3
- Typical 0.6V ±1% Internal Reference Voltage
- Sync Pin Allows Synchronization to an External Clock from 1.8MHz to 2.4MHz
- Optimized Upper and Lower MOSFETs RDS_on for max Efficiency:
- N-CH MOSFET (90 mΩ) for CH2/3 High Side
- N-CH MOSFET (45 mΩ) for CH1 Low Side
- N-CH MOSFET (50 mΩ) for CH2/3 Low Side
- Built in OVP, UVP, Current Limit, VIN OVP and OTP
- Low Cost TQFN 4x4-20D Wettable Flanks Package
- High Performance or Low Cost Configuration, Auto Mode or FPWM can be set by MODE PIN
- Spread Spectrum Option and Power On Sequence can be configured by SEQ/SSP PIN
General Description
The APW9304H is a three-channel synchronous mode PWM converter with 3A continuous current capability for one channel and 2.5A continuous current capability for the other channel and 1.5A continuous current capability for the other one channel. Although the switching frequency of the APW9304H is fixed at 2.1MHz, it can also change the switching frequency via the EN/SYNC pin. The APW9304H also provides a 120-degree phase shifting technique and Spread Spectrum option to minimize the noise for reducing EMI. The output voltage of each channel can be adjusted using an external resistor divider. Other features include VIN OVP, VOUT OVP, UVP, current limit, and OTP. The internal switching frequency is set at 2.1MHz. Other features of the part include VIN OVP, OVP, UVP, Current Limit and OTP. The APW9304H is available in a TQFN 4x4-20D wettable flanks package with small size and excellent thermal capacity.
Features
- Wide operating voltage range from 9V to 18V
- Low on-resistance RON=40mΩ
- Fast output over voltage response time 0.5us
- Adjustable output slew rate
- Fixed output over voltage clamp 13.5V
- Short circuit protection
- Over temperature protection 150oC
- Normal operation temperature -40oC ~ 125oC
General Description
APL3693 is a high-performance power protecting and management solution electronic fuse in DFN 3x3 package type. Have wide operation voltage range from 9V to 18V and integrate enable function, internal MOSFET have very low on resistance 40mΩ. The output voltage slew rate can be set with a single capacitor (CdV/dt) and also can floating the dV/dt pin and the output slew rate by internal setting. And output current limit is fixed with a single resistor (RLIMIT). Output voltage have a clamping voltage 13.5V with quickly response time 0.5μs when VCC voltage rising to over voltage clamp threshold 13.7V. APL3693 operation temperature from -40oC to 125oC. And turn off the output when temperature exceeds 150oC.
Features
Voltage Rail
- Provide 4 Buck Single Phase PWM Converters
- DC2: 0.6V - 3.3V at 1.5A
- DC3: 0.6V - 3.3V at 1A
- DC4: 0.6V - 3.3V at 1.5A
- Provide 3 LDO Output
- LDO1 0.6V - 3.3V, 150mA, Reference=0.6V
- LDO2 1.5V - 3.05V, 300mA, Controlled by I2C
- Provide 2 Load Switches Enable Signal
- Current Limit Protection
- Output Under-Voltage Protection
- Output Over-Voltage Protection for Bucks
- Thermal Shutdown Protection
- TQFN 5x5-40 Package
- Lead Free and Green Devices Available (RoHS Compliant)
General Description
The APW7704B is a Power Management IC (PMIC) designed to provide complete Power Management solution for the driving video recorder (DVR) applications. The APW7704B is designed to provide maximum number of regulators in the smallest available cost effective package. Included in the IC are: Four Synchronous Buck Converters for DC1 ~ DC4; Three LDOs with one for RTC application, and Two Load Switch Enable Signal Control for external load switches application. For the Bucks, the IC is equipped with all the standard protection features such as current limit, over voltage and internal under voltage lock out protection as well as thermal shutdown. The serial interface is an I2C communication interface. The I2C interface also allows for adjustability of VRs’voltage. Also, the power sequenc is defined by strobes and delay times under I2C control. The device is available in a 40-pin, 5x5 mm2 thin QFN package for best thermal performance while optimizing the cost.
Features
Voltage Rail
- Provide 4 Buck Single Phase PWM Converters
- DC2: 0.6V - 3.3V at 1.5A
- DC3: 0.6V - 3.3V at 1A
- DC4: 0.6V - 3.3V at 2A
- Provide 3 LDO Output
- LDO1 0.6V - 3.3V, 150mA, Reference=0.6V
- LDO2 1.5V - 3.05V, 300mA, Controlled by I2C
- Provide 2 Load Switches Enable Signal
- Current Limit Protection
- Output Under-Voltage Protection
- Output Over-Voltage Protection for Bucks
- Thermal Shutdown Protection
- TQFN 5x5-40 Package
General Description
The APW7704C is a Power Management IC (PMIC) designed to provide complete Power Management solution for the driving video recorder (DVR) applications. The APW7704C is designed to provide maximum number of regulators in the smallest available cost effective package. Included in the IC are: Four Synchronous Buck Converters for DC1 ~ DC4; Three LDOs with one for RTC application, and Two Load Switch Enable Signal Control for external load switches application. For the Bucks, the IC is equipped with all the standard protection features such as current limit, over voltage and internal under voltage protection as well as thermal shutdown. The serial interface is an I2C communication interface. The I2C interface also allows for adjustability of VRs’ voltage. Also, the power sequenc is defined by strobes and delay times under I2C control. The device is available in a 40-pin, 5x5 mm2 thin QFN package for best thermal performance while optimizing the cost.
Features
Voltage Rail
- Provide 4 Buck Single Phase PWM Converters
- DC2: 0.6V - 3.3V at 1.5A
- DC3: 0.6V - 3.3V at 1A
- DC4: 0.6V - 3.3V at 2A
- Provide 3 LDO Output
- LDO1 0.6V - 3.3V, 150mA, Reference=0.6V
- LDO2 1.5V - 3.05V, 300mA, Controlled by I2C
- Provide 2 Load Switches Enable Signal
- Current Limit Protection
- Output Under-Voltage Protection
- Output Over-Voltage Protection for Bucks
- Thermal Shutdown Protection
- TQFN 5x5-40 Package
- Lead Free and Green Devices Available (RoHS Compliant)
General Description
The APW7704D is a Power Management IC (PMIC) designed to provide complete Power Management solution for the driving video recorder (DVR) applications. The APW7704D is designed to provide maximum number of regulators in the smallest available cost effective package. Included in the IC are: Four Synchronous Buck Converters for DC1 ~ DC4; Three LDOs with one for RTC application, and Two Load Switch Enable Signal Control for external load switches application. For the Bucks, the IC is equipped with all the standard protection features such as current limit, over voltage and internal under voltage lock out protection as well as thermal shutdown. The serial interface is an I2C communication interface. The I2C interface also allows for adjustability of VRs’voltage. Also, the power sequenc is defined by strobes and delay times under I2C control. The device is available in a 40-pin, 5x5 mm2 thin QFN package for best thermal performance while optimizing the cost.
Features
Voltage Rail
- Provide 4 Buck Single Phase PWM Converters
- DC2: 0.6V - 3.3V at 1.5A
- DC3: 0.6V - 3.3V at 1A
- DC4: 0.6V - 3.3V at 2A
- Provide 3 LDO Output
- LDO1 0.6V - 3.3V, 150mA, Reference=0.6V
- LDO2 1.5V - 3.05V, 300mA, Controlled by I2C
- Provide 2 Load Switches Enable Signal
- Current Limit Protection
- Output Under-Voltage Protection
- Output Over-Voltage Protection for Bucks
- Thermal Shutdown Protection
- TQFN 5x5-40 Package
- Lead Free and Green Devices Available (RoHS Compliant)
General Description
The APW7704E is a Power Management IC (PMIC) designed to provide complete Power Management solution for the driving video recorder (DVR) applications. The APW7704E is designed to provide maximum number of regulators in the smallest available cost effective package. Included in the IC are: Four Synchronous Buck Converters for DC1 ~ DC4; Three LDOs with one for RTC application, and Two Load Switch Enable Signal Control for external load switches application. For the Bucks, the IC is equipped with all the standard protection features such as current limit, over voltage and internal under voltage lock out protection as well as thermal shutdown. The serial interface is an I2C communication interface. The I2C interface also allows for adjustability of VRs’voltage. Also, the power sequenc is defined by strobes and delay times under I2C Control. The device is available in a 40-pin, 5x5 mm2 thin QFN package for best thermal performance while optimizing the cost.
Features
Voltage Rail
- Provide 4 Buck Single Phase PWM Converters
- DC2: 0.6V - 3.3V at 1.5A
- DC3: 0.6V - 3.3V at 1A
- DC4: 0.6V - 3.3V at 1.5A
- Provide 3 LDO Output
- LDO1 0.6V - 3.3V, 150mA, Reference=0.6V
- LDO2 1.5V - 3.05V, 300mA, Controlled by I2C
- Current Limit Protection
- Output Under-Voltage Protection
- Output Over-Voltage Protection for Bucks
- Thermal Shutdown Protection
- TQFN 5x5-40 Package
General Description
The APW7704F is a Power Management IC (PMIC) designed to provide complete Power Management solution for the Human Machine Interface (HMI) applications. The APW7704F is designed to provide maximum number of regulators in the smallest available cost effective package. Included in the IC are: Four Synchronous Buck Converters for DC1 ~ DC4; Three LDOs with one for RTC application. For the Bucks, the IC is equipped with all the standard protection features such as current limit, over voltage and internal under voltage protection as well as thermal shutdown. The serial interface is an I2C communication interface. The I2C interface also allows for adjustability of VRs’ voltage. Also, the power sequenc is defined by strobes and delay times under I2C Control. The device is available in a 40-pin, 5x5 mm2 thin QFN package for best thermal performance while optimizing the cost.
Features
Charger
- 3.5V to 5.5V Operating Input Range
- Built-in UVLO, OVP for Main Input Voltage
- Built-in 7 High-Efficiency Step-Down Converters
- BUCK2: 1V ~ 3.4V, 10mV Step, 2A
- BUCK3: 0.45V ~ 1.275V, 3.75mV Step, 6A
- BUCK4: 0.6V ~ 1.54V, 5mV Step, 3A
- BUCK5: 0.45V ~ 1.275V, 3.75mV Step, 3A
- BUCK6: 1V ~ 3.4V, 10mV Step, 2A
- BUCK7: 1V ~ 3.4V, 10mV Step, 2A
- Configurable Dual Phase or Single Phase Regulator for BUCK1/BUCK3
- Configurable PWM Switching Frequency from 400kHz to 2.5MHz
- Programmable Automatic PFM/PWM Mode, Forced PWM Mode
- Adjustable Ramp-Up Time and Ramp-Down Time for BUCK1 ~ BUCK7
- Built-in RTC Dedicated LDO and 5 Low-Noise LDOs
- LDO2: 1V ~ 3.4V, 50mV Step, 300mA
- LDO3: 1V ~ 3.4V, 50mV Step, 300mA
- LDO4: 0.6V ~ 1.23V, 10mV Step, 200mA
- LDO5: 1V ~ 3.4V, 50mV Step, 150mA
- LDO6: 0.6V ~ 1.23V, 10mV Step, 300mA
- Configurable LDO2/3 output 1.8V/3.3V by LDO2/3_SEL Pin
- Built-in Dual Sets of Logic Control Signal Outputs, Selectable at 1.8V or 3.3V
- Built-in Double Thermal Protection with Temperature Alarm and Thermal Shutdown
- Built-in Output Over Voltage Protection (OVP), Output Under Voltage Protection (UVP), Current Limit
- Built-in Interrupt Control and Reporting by /INT Pin
- Built-in PGOOD to Indicate the Power Status of All VRs
- I2C Bus and User Programmable MTP
- Programmable Power Sequence Control for All Channels via I2C
- Built-in Watchdog Timer, Programmable via I2C
- Supports Self-Refresh Mode via Off Mode Function
- Available in TQFN6x6-52B Package
General Description
The APW7720 is a Power Management IC (PMIC) designed to provide complete power management solution for Surveillance Cam, IP Cam and Video Conference-Call applications. It integrates a PWM power stage and well-designed control circuitry to minimize the need for external components, thereby simplifying layout in constrained PCB areas. This device features 7 adjustable output voltage buck converters, 6 adjustable output voltage low-noise LDOs, and 2 sets of built-in logic control signal outputs selectable at 1.8V or 3.3V, all of which can be configured via I2C. The APW7720 features protection functions against over current, output over/under voltage, VSYS over voltage and over temperature to prevent catastrophic failure. Fault events also cause a state change on the PGOOD and /INT output pins, which is helpful for interrupt control or debugging. Additionally, it integrates two Under-Voltage Lockout (UVLO) features to monitor the voltages of VSYS and VINLDO1, thereby preventing improper operation during power-up and power-down. An I2C interface is provided in this device for the system designer to customize settings or presets using Multi-Time Programmable (MTP) features, including power-up/
down sequence, output voltage, ramp-up/down time, power-good delay time, watchdog timer, PWM switching frequency, forced PWM mode or automatic PFM/PWM mode, output discharge mode or ramp-down mode, and latch off mode or auto-reboot mode. These customizable MTP settings give system designers the flexibility to optimize performance for various use cases, ensuring efficient and reliable operation. The APW7720 is halogen and lead free device, compliant with RoHS, available in TQFN6x6-52B package.
提供低元件數量設計和低靜態電流的特性,是空間受限的 PCBs 和電池供電應用的理想選擇
此外,茂達電子致力於降低 EMI (Out-of-Phase operation & Spread spectrum),並提供...
茂達電子成立於1997年10月,為台灣第一家掛牌之Power IC (功率積體電路) 設計公司。為滿足高端市場需求,茂達電子於2000年啟動轉型,大幅建置數位/混合 IC 設計能量與相關產品線,成為Power-based mix-signal IC 供應商,提供客戶完整的Mix-signal IC 解決方案。
持續改善
客戶滿意
品質承諾
全員參與
精準到位
The APX9351 Provides All the Circuitry for Sensor-less Speed Control of three-phase Brushless DC Motor
The APX9351 Provides All the Circuitry for Sensor-less Speed Control of three-phase Brushless DC Motor.
Discover the APE5035: 96 Channel LED Local Dimming Controller for LCD Backlight
The APE5035 integrates a MOSFET and a 96-channel LED controller for LCD backlighting. It provides highly accurate LED current control (2% with a 30mA LED current) and operates over a wide input voltage range.
【員工照護】健康講座:腸保健康-護眼又能打造好曲線
減重期間,總是無法克制自己想吃東西的慾望嗎?多次嘗試減重卻一直沒有明顯效果?偏偏此時又開始覺得視力變差、眼睛花花,多重壓力下,開始懷疑自己是否失去健康的權利?
請先別急著氣餒,你只是需要腸道好菌的神救援!讓Vivian李芷薇營養師教你如何挑選食物,照顧好腸道菌群,既能安撫你的大腦,減少暴飲暴食的衝動,同時照顧眼睛健康,為你打造護眼又保持好身材的最佳黃金支援隊!
茂達電子榮獲中華徵信所評選為「台灣大型企業排名TOP5000」
茂達電子榮獲中華徵信所評選為2023年「台灣大型企業排名TOP5000」積體電路設計業第26名
APW7720 PMIC features 7 Buck Converters, 6 LDOs, 2 LSs and Flexible System Settings via I2C and MTP
The APW7720 Power Management IC (PMIC) only requires one supply input, LI-ION Battery (3.0~4.3V) or 5.0V, generates seven PWM step-down converters, five low-noise LDOs, one RTC-dedicated LDO, and two enable logic control.
茂達電子榮獲天下雜誌評選為2023年「天下雜誌2000大」
榮獲天下雜誌評選為2023年「天下雜誌2000大」製造業第509名、稅後純益排名第373名、獲利率第387名
Discover the APW8895: a Synchronous NVDC Buck-Boost Switching Charger Controller
This versatile device seamlessly transitions between buck, buck-boost, and boost modes, catering to 2- to 4-cell Li-ion batteries.
【社會關懷】茂達心,幼安情
在現今物價居高不下的現實社會中,有許多弱勢族群,邊陲在社會的陰暗角落,正等待著愛心人士伸出援手。 本次活動總共向苗栗偏鄉幼安教養院捐款125,500元和物資捐贈31,149元。
ANPEC Collaborates with Valens Semiconductor to Deliver Optimized Automotive Power Solutions
We are thrilled to announce a collaboration between ANPEC and Valens to develop cutting-edge solutions for the automotive industry. The companies collaborated on integrating ANPEC's APW9304H, an AEC-Q100 qualified Power Management IC, known for its ultra-low EMI feature and flexible power sequencing, to Valens' VA7000 and VA6000 series product reference designs for ADAS, autonomous driving and in-car entertainment systems.
【員工照護】健康講座:無菸新生活,健康我做主
你/妳知道嗎?菸品中含有7000多種化學物質,其中包括250種危害物質與93種致癌物,因此許多疾病的發生都與菸害有密切關係,可能導致呼吸道、心血管、消化道、五官、生殖系統、癌症等疾病,其影響可謂從頭到腳、由裡到外,無一處不傷害。本次講座將聚焦於戒菸管道及戒菸藥物的介紹,一起來找出最適合自己的戒菸方式吧!
APW9304H is an ultra-low EMI triple buck converter and designed for automotive applications (AEC-Q100)
Meet the APW9304H, an advanced triple buck converter designed for automotive excellence (AEC-Q100).