Who Do You Call for Asbestos Removal Services?
You don't want to cut corners with this project
![A modern family house with patio](https://s3media.angieslist.com/s3fs-public/Modern-family-house-patio.jpeg?impolicy=leadImage)
![A modern family house with patio](https://s3media.angieslist.com/s3fs-public/Modern-family-house-patio.jpeg?impolicy=leadImage)
The danger of asbestos in homes cannot be ignored, as it poses a great risk to both occupants and the environment. Although asbestos was once a widely used construction material due to its insulating and fire-resistant properties, it has since been recognized as a severe health hazard. When faced with the daunting task of removing asbestos, you may be left wondering who to call for asbestos removal. Here is how to find a reliable professional to remove this hazardous material safely.
Benefits of Hiring an Asbestos Abatement Professional to Remove Asbestos
![A macro photograph fibers of the mineral chrysotile asbestos](https://s3media.angieslist.com/s3fs-public/Macro-photograph-asbestos.jpeg?impolicy=leadImage)
Asbestos is a hazardous material that can pose serious health risks when disturbed. Hiring an asbestos abatement professional is the best course of action for homeowners. The average asbestos removal cost ranges between $1,200 and $3,200 and delivers peace of mind to homeowners who know the job is done well to minimize the dangers of asbestos exposure. Here are some benefits of hiring a qualified professional:
Expertise: Professionals certified in asbestos abatement possess extensive training and expertise in dealing with asbestos-containing materials. They have a specialized understanding of the appropriate protocols for containing, removing, and disposing of these materials in a way that minimizes the likelihood of exposure.
Reduced risk: Airborne asbestos fibers can pose a severe health risk if inhaled, particularly during the removal process. Professionals trained in this task use specialized equipment and techniques to prevent the release of these fibers into the air. This effectively minimizes the exposure risk to both workers and occupants.
Thorough assessment: Professionals conduct a meticulous evaluation of the materials in your property that contain asbestos, leaving no stone unturned. They can spot the presence of asbestos in areas that are difficult to reach or concealed to ensure a complete elimination process. They also conduct a thorough inspection after the removal process to ensure that all contamination has been eliminated.
Health and safety compliant: To ensure the safety of workers and the general public, strict regulations and guidelines are in place for asbestos removal. Professionals are well versed in adhering to these rules, which ensures a legally compliant and safe asbestos removal process.
Proper disposal: The handling and disposal of asbestos waste are subject to specific regulations. Professional abatement services understand the correct procedures for disposing of such materials, effectively avoiding any potential illegal dumping of asbestos-containing materials.
Can I DIY Asbestos Removal?
The disturbance of asbestos-containing materials without adequate knowledge, training, and equipment can pose severe health risks not only to you and your family, but also to anyone in the vicinity. When released into the air, asbestos fibers can be inhaled and cause severe respiratory problems, such as lung cancer and asbestosis. For this reason, asbestos removal is considered a hazardous project, and DIYing it is strongly advised against.
Below are a few key reasons why you should not consider DIY asbestos removal:
Health risks: Removing asbestos on your own could inadvertently release asbestos fibers and contaminate the entire space. Asbestos exposure has been linked to severe health complications, and even a small amount of exposure can result in long-term health complications. Professionals utilize techniques that minimize the release of fibers, safeguarding those occupying the area.
Lack of skill: Expertise in safely handling asbestos-containing materials requires specific training. Professional asbestos abatement technicians are familiar with proper containment, removal techniques, and disposal procedures, in contrast to DIY removal, which lacks this essential knowledge.
DIY kit limitations: Although asbestos removal kits can be purchased for DIY projects, they have limitations and should not be relied upon as a substitute for professional expertise. These kits may not offer sufficient protection or guidance for safe removal and are notoriously inaccurate.
Legal compliance: Compliance with rigorous regulations and guidelines is imperative when undertaking asbestos removal. Engaging in do-it-yourself removal without adhering to local, state, and federal protocols may result in serious legal repercussions, including fines and penalties.
Disposal challenges: Proper disposal of asbestos waste is essential, and it must comply with specific regulations to ensure the safety of others and prevent potential violations of environmental laws. Any attempts to dispose of asbestos waste through DIY means may lead to inadequate disposal, putting others at risk.
Impact on home value: Inadequate asbestos elimination may adversely affect your property's worth. Prospective buyers are likely to feel hesitant about the existence of asbestos and the methods used to remove it.
Can I Hire a General Contractor to Perform Asbestos Removal Services?
Although some general contractors may possess the necessary qualifications to handle aspects of asbestos removal, it is crucial to understand that asbestos abatement is a specialized field that demands specific training, certification, and compliance with regulatory standards. Engaging a general contractor for asbestos removal should be done with caution, and various factors should be considered:
Certification: Verify that the general contractor possesses the required licenses and certifications for asbestos removal. Since asbestos disposal is usually overseen by authorities at the local, state, and federal levels, regulations must be accurately followed.
Experience: Ensure that the contractor has sufficient expertise in asbestos removal, focused on their proficiency in handling asbestos-containing materials. Request references and examples of previous asbestos abatement projects to verify.
Insurance coverage: Ensure that the liability insurance of the general contractor is sufficient to cover asbestos-related work, which may offer monetary protection in the event of unforeseen circumstances, damages, or accidents during the removal process.
Disposal procedures: Confirm that the contractor has an appropriate plan for the disposal of asbestos waste, as such waste necessitates specific handling and disposal measures to avoid environmental pollution.
How an Asbestos Abatement Professional Removes Asbestos
![A roof made of gray embossed metal sheets](https://s3media.angieslist.com/s3fs-public/Roof-gray-embossed-metal-sheets.jpeg?impolicy=leadImage)
Asbestos removal starts with a comprehensive assessment of the area to determine the extent and type of asbestos present. Once assessed, the asbestos abatement professional establishes containment measures to prevent the release of asbestos fibers into the air during removal. This may include sealing off the work area with plastic sheeting and implementing negative air pressure systems. The use of personal protective equipment (PPE) will be critical to ensure the safety of the abatement team.
To minimize the disturbance of asbestos-containing materials, the expert uses specialized tools and equipment during the removal process. Misting is a commonly employed wet method to suppress dust and fiber release. The removed materials are cautiously packaged and labeled for proper disposal in compliance with regulatory guidelines. Following removal, a thorough cleanup is conducted, with air monitoring to confirm the effectiveness of the abatement.