Can You Use Potassium Chloride in Any Water Softener?
If you're feeling salty, try using potassium chloride in your water softener
Highlights
Potassium chloride works in the same way that sodium chloride does in water softeners.
There are health and environmental benefits to using potassium chloride.
Potassium chloride costs $45 to $65 for a 40-pound bag.
People with certain health conditions should not use potassium chloride.
Potassium chloride, a substitute for sodium chloride, can be used in most home water softeners. In some cases, you may need to use the same chemical for the entire life of the appliance after you install your water softener—for instance, if you started with sodium chloride, you have to stay with sodium chloride—so be sure to check your owner’s manual to make sure that you can make the switch without damaging your appliance.
What Is Potassium Chloride?
Potassium chloride is a naturally occurring mineral and an essential nutrient found in fruits and vegetables, dairy products, and meat. It’s also a salt you can use in your water softening system. Your water softener works by removing minerals from hard water, and the uses salts like sodium chloride and potassium chloride to flush out the collected minerals.
When you use potassium chloride crystals in a water softener, they filter out the magnesium and calcium (the minerals that make hard water “hard”) and replace them with potassium.
Why Use Potassium Chloride Instead of Sodium Chloride?
Most water softeners were designed to run with sodium chloride crystals (aka salt). The only exception would be salt-free water softeners, but these aren’t as common and usually aren’t nearly as efficient.
Both sodium chloride and potassium chloride are effective when it comes to softening water. But when you use sodium chloride crystals in water softeners, they leave a residual amount of sodium in the water after the softening process has occurred. Making the swap to potassium gets rid of this issue.
Health Benefits
For people who are looking to reduce their salt intake due to health restrictions, using potassium chloride is an option. According to the American Heart Association, the effects of excess sodium consumption include heart disease, stroke, stomach cancer, and other health conditions. As 90% of Americans consume too much sodium, any way to cut out a little here and there is beneficial for your health.
Environmental Benefits
Health benefits aren’t the only advantage of using potassium chloride over sodium chloride, according to the University of Massachusetts-Amherst's Center for Agriculture, Food, and the Environment. Disposing of the brine, or saltwater, from your water softener can be a challenge. Brine is bad for plants, and if your municipality isn’t equipped to handle it, you’ll need to find other ways to dispose of your water.
Alternatively, potassium is often used industrially as a fertilizer and is good for plants. Using the backwash from a potassium-based water softener to water your plants should help them to flourish.
Which Is Better for Water Softeners?
![running water in kitchen faucet](https://media.angi.com/s3fs-public/running-water-faucet_0.jpg?impolicy=leadImage)
Generally, a water softener can’t tell the difference between potassium chloride crystals and sodium chloride crystals, and water softener maintenance will be the same regardless of what salt you use. As long as there is a mineral agent binding to the magnesium and the calcium to remove them from the hard water, most softeners will do the job without any problems. In some cases, you can even mix potassium chloride and sodium chloride crystals in your water softener.
You can always call in a water specialist near you to help you decide how to get the best quality water from your softener.
How Much Does Potassium Chloride Cost?
One of the main reasons people continue to use sodium chloride over potassium chloride is cost. A 40-pound bag of salt (sodium chloride) crystals usually runs around $10. Compare that with potassium chloride, which costs $54 to $65 for a 40-pound bag.
A 40-pound bag of either is enough to soften the water of a two-person household for a month. Over a year, you’d save $264 to $330—depending on the size of your water softener—by using sodium chloride instead of potassium chloride.
Sodium is also more efficient than potassium, so you would also need around 25% more potassium chloride crystals for your water softener than sodium chloride crystals.
Who Should Not Use Potassium Chloride?
According to the American Heart Association, people with chronic kidney disease, heart failure, diabetes, and people who take medication that alters potassium levels (including some blood-pressure-lowering medications) should be careful when increasing their potassium intake. If you fall into one of these categories, consult your doctor before making a switch in your water softener.
Frequently Asked Questions
Experts recommend that you put two to four bags of potassium chloride in your water softener every month. This amount depends on how much is in the bag (40 pounds is most common) and what your water softener manufacturer recommends. For more specific advice, talk to a water softener pro in your area and read the manual that came with your system.
Yes. Potassium is actually a vital nutrient for plants, so using potassium chloride-treated water on your plants is harmless and may even be enriching. However, if you find that your plants aren’t tolerating your treated water, you can pour some water in your watering can and let it sit for one to five days so that the chlorine can diminish.