Injection Molding
7,091 Followers
Recent papers in Injection Molding
A Ceramic Injection Moulding process has been used for the manufacturing of Ni-Zn Ferrite parts. The binder was based on a combination of polypropylene and paraffin wax. Different feedstocks were prepared in order to check the effect of... more
Numerical simulation based on finite numerical methods is used to predict the production process by injection molding of two polymers parts used in low cost domestic refrigerators. The Hele-Shaw fluid mechanics model along with the volume... more
Plastic Injection molding industry has been playing a major role in the mass production of plastic products for various industries; here a product from electrical industry is taken and studied for its quality improvement. This Study deals... more
The effect of the thickness on the mechanical properties of injection-molded specimens of pure polyamide-6 (PA6) and polyamide-6 clay nanocomposites (PA6-NC) with 5wt% of layered silicates was investigated. Plates of 0.5, 0.75, 1 and 2mm... more
Presents rheological data on a number of polymers, making use of the master curve approach to determine unified curves for each generic type of polymer. The text offers a step-by-step procedure for developing a speadsheet computer program... more
Occupational eye wear such as safety spectacles are manufactured by injection molding techniques. Testing of the assembled safety spectacle lenses in transmission is state of the art, but there is a lack of surface measurement systems for... more
The objective of this study was to investigate the effects of material compositions on the mechanical properties of wood–plastic composites (WPCs) manufactured by injection molding. Using a ratio of wood flour/plastic matrix/MAPP (maleic... more
This article examines a postmodern construct of masculinity in which male identity is based on consumption, a traditional role for women, rather than production. Data for this qualitative content analysis were drawn from a sample of Men's... more
Troublshooting-for-PET-Preform
Consideration is given to the characterization and origins of mold fouling occurring during the injection molding of elastomers. Results for nitrile rubber and fluoroelastomer compounds are presented with a range of techniques, including... more
— Injection molding is the most widely used method for the production of intricate shape plastic parts with good dimensional accuracy. For plastic components manufacturing process used is Injection molding. While doing this manufacturing... more
Design simple two plate mold tool for production of measuring spoon. That measuring Spoon use to measure 8ml of volume. Firstly we have taken a concept of measuring spoon. That are already exist in market and created a good design... more
Objectives: The project are to identify, analyse and assess hazard that available at Sipro Plastic Industries Sdn Bhd. To improve and to propose a better workplace condition by implementing and proposing a possible control measure and... more
Plastic products formation process duration is the important parameter of technological injection molding. For information combination on several parameters of plastic products formation the Venn diagram has been used. The diagram... more