Skip to main content
    • by 
    •   8  
      Materials ScienceFailure AnalysisCreepNickel
High-temperature creep tests were conducted on polycrystalline copper of commercial purity in order to investigate the inter-relationship between the extent and the rate of grain boundary sliding (GBS) and the development of internal... more
    • by 
    •   11  
      Materials EngineeringMechanical EngineeringMaterials ScienceSample Preparation
    • by 
    •   2  
      Animal ScienceCreep
The purpose of this study is to evaluate the long-term vertical deformations of segmented pre-tensioned concrete bridges by a new approach. It provides a practical and reliable method for calculating the amount of long-term deformation... more
    • by 
    •   6  
      Materials ScienceStructural EngineeringBridge EngineeringOptimization
    • by 
    •   12  
      Materials EngineeringCondensed Matter PhysicsComputational Materials ScienceFiber Reinforced Plastic
Nanostructuring metals through nanograins and nanotwins is an efficient strategy for strength increase as the mean free path of dislocations is reduced. Yet, nanostructures are thermally often not stable, so that the material properties... more
    • by 
    •   14  
      Phase TransformationsTransmission Electron MicroscopyMechanical Behavior Of MaterialsGrain Boundaries
    • by 
    •   5  
      EngineeringDesignCreepModel
    • by 
    •   5  
      Mechanical EngineeringFinite ElementFinite Element AnalysisCreep
    • by 
    •   10  
      Finite element methodHysteresisFinite Element AnalysisCreep
Lifetime management of underground pipelines is mandatory for safe hydrocarbon transmission and distribution systems. The use of high-density polyethylene tubes subjected to internal pressure, external loading and environmental variations... more
    • by 
    •   17  
      Mechanical EngineeringModelingDistributed SystemSafety
    • by 
    •   20  
      GeologyGeomorphologyQuaternaryCzech Republic
The creep of a dislocation on its glide plane is essentially controlled by three different stress fields: the external applied stress, the internal stress field due to a multi-scale hierarchy of different obstacles (the structural defects... more
    • by 
    •   6  
      PlasticityCreepDislocationAnelasticity
    • by  and +1
    •   8  
      Materials EngineeringMechanical EngineeringCreepWood
    • by 
    •   8  
      Materials EngineeringMechanical EngineeringCivil EngineeringFinite Element Analysis
    • by 
    •   17  
      RheologyStressMultidisciplinaryStrain Rate
    • by 
    •   5  
      Vibration ControlIntegral EquationsHysteresisCreep
    • by 
    •   12  
      Materials EngineeringMechanical EngineeringPlasticityGrain Boundaries
Based on very early occurring ruptures found in the first stage high pressure turbine blades of a turbo reactor in a local aviation company, this study has the aim to determine their safe life. The first stage blades are subjected to... more
    • by  and +1
    •   54  
      Materials EngineeringMetallurgical EngineeringMechanical EngineeringMaterials Science
Приводятся результаты экспериментальных исследований характеристик физико-механических и реологических свойств высокопрочных модифицированных бетонов на основе органоминеральных модификаторов с использованием техногенных отходов... more
    • by  and +1
    •   6  
      Deformation and strainCreepCompressive StrengthHigh Strength and High Performance Concrete
Analysis of creep damage in steels used in the power generation industry is usually carried out by means of traditional creep detection techniques, but the several shortcomings of these methods have induced a search for alternative... more
    • by  and +1
    •   5  
      FatigueNon Destructive TestingCreepThermal Power Plants
    • by 
    •   5  
      Mechanical EngineeringCreepHigh TemperatureGrain Boundary
    • by 
    •   7  
      Materials EngineeringMechanical EngineeringCreepStress relaxation
    • by 
    •   16  
      Materials EngineeringCondensed Matter PhysicsMicrostructureMorphology
    • by 
    •   8  
      MicroelectronicsEvolutionCreepTemperature
Published accounts of peat mass movements throughout the last 500 years reveal common characteristics among the failures; however, there has been no consistency in the terminology used to describe them. Given the apparently increasing... more
    • by 
    •   12  
      GeologyGeomorphologyClimate ChangeMorphology
    • by 
    •   2  
      CreepEmbrittlement
    • by 
    •   19  
      Computational Fluid DynamicsProductionElectromagnetic CompatibilityMesh generation
Creep behavior of neat, talc-filled, and short glass fiber reinforced injection molded thermoplastic composites were investigated and modeled at room and elevated temperatures. Creep strength decreased and both creep strain and creep rate... more
    • by 
    •   2  
      CreepThermoplastics
    • by 
    •   11  
      EngineeringMicrostructureBehaviorModeling
    • by 
    • Creep
    • by 
    •   6  
      EngineeringCreepTemperatureCracking
    • by 
    •   5  
      Materials EngineeringFilmCreepPp
    • by 
    •   23  
      ViscoelasticityGlassFinite ElementElasticity
    • by 
    •   9  
      Mechanical EngineeringCivil EngineeringFatigueTransition-Metal Oxides
La historia que inspiro la saga camino hacia el terror. Hola estimados suscriptores, amantes de lo oscuro y las leyendas urbanas, ¿cómo ha estado su familia? En esta ocasión les hablaremos de la historia que inspiró a la saga de películas... more
    • by 
    •   20  
      Horror FilmTime series analysisCreepArtículos
    • by 
    •   17  
      Finite Element MethodsNumerical ModelingGeotechnical EngineeringGenetic Algorithms
    • by 
    •   8  
      CreepAssemblySolderingMoisture
    • by 
    •   9  
      Materials EngineeringMechanical EngineeringContact MechanicsWear
Reliability centered maintenance (RCM) has a key role in the quality system of thermal power plants. Electricity production is definitely not only production of a product, but also becomes a customer service. Reliability is the top... more
    • by 
    •   106  
      Materials EngineeringMaterials ScienceQuality ManagementMaterials Chemistry
    • by 
    •   7  
      EngineeringKineticsCreepStructural Change
    • by 
    •   4  
      Civil EngineeringCreepHigh Density PolyethyleneRutting
    • by 
    •   12  
      EngineeringCompositesCreepSurface modification
    • by 
    •   7  
      PolymersFatigueCreepPolymer Composites
Due to the empirical nature and the drawbacks of the Marshall mix design procedure, the Strategic Highway Research Program (SHRP) has developed a Superior Performance asphalt Pavements (SUPERPAVE) mix design procedure. In this research a... more
    • by 
    •   11  
      Civil EngineeringPerformance EvaluationCreepBuilding
    • by 
    •   2  
      MicrostructureCreep
The crankshaft is an essential component of internal combustion engines, which is widely used in an automobile. The most common modes of crankshaft failure are fatigue failure. During its operation, the crankshaft is always subjected to a... more
    • by 
    •   4  
      Mechanical EngineeringFatigueCreepRelaxation
    • by 
    •   13  
      Mechanical EngineeringModelingFinite element methodPressure Vessels
    • by 
    •   7  
      Mining EngineeringRock MechanicsCreepEngineering/mechanical Properties of Rocks
    • by 
    •   16  
      Civil EngineeringGeomorphologyRock MechanicsFracture
In the attached document a Creep Analysis has been reported.
The main purpose is to compare Code_Aster Results with analytical Solutions.
    • by 
    •   2  
      CreepPressure Vessel Design