You may or may not remember
this post, where I merged a gorgeous tiger graphic from an old ratty crop top to the front of a dress. Anyways, I had taken the pictures with my phone and wasn't able to comment in between the pictures, so I've been kinda feeling like I needed to re-blog this method. That, and the fact that I really like this method and have done it a few times since that last post, I decided to re-show this same process using different clothing items.
Here is a black sweatshirt that I really like, but I have lots of black shirts, so I was willing to let it get embellished. (Disregard the clothing hanging behind it. These are not the droids you are looking for...)
I found this super cute sequin heart smiley face off the dollar rack, but as you can see. . .it's on a shirt I would NEVER wear.
Harvest time! (3/4" seam around it).
I ironed it on the wrong side to make sure it was flat.
Then, I folded the sweatshirt in half and put pins down the fold to delineate the middle.
Then, I lined up the points of the heart with the pins, folded one side of the heart over and sprayed the back with adhesive spray.
I repeated the spraying on the other half of the heart.
The purpose of spraying the graphic with spray adhesive is so that the graphic will stay in place. You could also use fusible iron-on backing. . .in which case, you may not even have to sew anything once the graphic has been ironed on. . .but I HAVE a sewing machine and spray adhesive, so. . .Why buy something extra?
Even though the graphic was stuck on, I still pinned it in place, because sometimes the fabric stretches funny and pins help that problem.
If you are doing the sewing method, this is where things may get tricky in your head, because if a shirt is already sewn together, how are you going to get the machine inside the shirt so the graphic can get sewn on properly? Like. . .it would be super easy if the shirt weren't sewn together yet. You would just sew the graphic onto the front piece of the shirt and then sew the shirt together. However, you can't do that when the shirt is already sewn together, unless you take it apart.
Don't worry. . .it's going to take a little finagling. . .but don't worry. You don't have to take anything apart. This is why spray adhesive is so helpful: The graphic will stick to the clothing all during this squishing and pushing process so you don't have to worry too much.
Remember, you have two holes to work with: the neck hole and the bottom seam.
Set your machine to a zig-zag stitch and put your machine as far back through the neck hole as you can manage. Then sew forward around your graphic, removing pins as you go, as far forward as you can. Cut your threads and remove your shirt from the machine.
Then, put your machine through the bottom hem as far back as you can go. (You should meet up with the last stitches you had made through the neck hole). Continue sewing forward until you meet up with the first stitches you made through the neck hole. Cut your threads and you're done!
You can see that all the seams of the actual sweatshirt are raw and unfinished, so I didn't even bother trimming the excess off around the heart.
Here is another project I did the same way. I took an adorable sequin heart off a nasty T-shirt and sewed it onto a nice, black sweater!
If you are worried about the graphic pillowing out from your garment (because the spray adhesive is going to wash out eventually), you can take a needle and thread and tack it down somewhere in the middle. Only one or two stitches are needed.
The seams on this sweater are all finished, so I did trim around the outer part of the heart, just to clean it up a bit.
The End!
